DWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
|
|
- Corey Booker
- 6 years ago
- Views:
Transcription
1 DMENONL CLOG B-DW Pipe and Fittings PC-DW Pipe and Fittings PC ewer Pipe PC chedule 30 DW hin Wall 3.25 in. O.D. Pipe and Fittings (Updated November 4, 2014) DW DC-DW Charlotte Pipe and Foundry Company
2 Plastic DW Pipe and Fitting Dimensions ll products manufactured by Charlotte Pipe and Foundry Company are proudly made in the U...
3 able of Contents Page B Foam Core chedule 40 DW Pipe Data...4 B Plus Foam Core chedule 40 DW Pipe Data...5 PC Foam Core chedule 40 DW Pipe Data...6 RePC chedule 40 DW Pipe Data...7 PC chedule 40 DW Pipe Data...8 D 3034 PC ewer Pipe Data...9 PC D 2729 ewer and Drain Pipe Data...10 PC and B DW Fittings Dimensions PC hin Wall ch. 30 Pipe Data...56 PC hin Wall ch. 30 Fittings Dimensions Certification Warranty...66 Download our ech ools pp for dimensional info, tech calculators and more on your mobile device. Charlotte Pipe, B Plus and RePC are registered trademarks of Charlotte Pipe and Foundry Company.
4 Pipe Data B Foam Core Pipe B chedule 40 DW Pipe (For Non-Pressure pplications) B CHEDULE 40 FOM CORE (BLCK) PLN END M F 628 MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) B x B x B x B x B x B x B x B x B x NF Listed. Meets ll Requirements of M F 628. NO FOR PREURE Do not use PC / B / B Plus cellular core (foam core) pipe for pressure applications. he use of cellular core pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death. 4
5 Pipe Data B Plus Foam Core DW Pipe B Plus is a registered trademark of Charlotte Pipe and Foundry Company. B Plus chedule 40 DW Pipe (For Non-Pressure pplications) B PLU CHEDULE 40 FOM CORE (BLCK) PLN END M F 1488 MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) B x B x B x B x B x B x B x B - D W P P E B x NF Listed. Meets ll Requirements of M F NO FOR PREURE Do not use PC / B / B Plus cellular core (foam core) pipe for pressure applications. he use of cellular core pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death. 5
6 Pipe Data PC Foam Core Pipe PC chedule 40 DW Pipe (For Non-Pressure pplications) PC CHEDULE 40 FOM CORE (WHE) PLN END M F 891 MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC CHEDULE 40 FOM CORE (WHE) PC 4112B x PC 4200B 2 x PC 4300B 3 x PC 4300B 3 x PC 4400B 4 x PC 4400B 4 x PC 4600B 6 x PC 4600B 6 x NOE: When ordering, please specify plain end or bell end. NF Listed. Meets ll Requirements of M F 891. esting with or use of compressed air or gas in PC / B NO FOR PREURE Do not use PC / B / B Plus cellular core (foam core) pipe for pressure applications. he use of cellular core pipe in pressure applications may result in system failure and property damage. 6 BELL-END MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) / CPC pipe or fittings can result in explosive failures and cause severe injury or death.
7 Pipe Data RePC DW Pipe RePC is a registered trademark of Charlotte Pipe and Foundry Company. PC chedule 40 DW Pipe with Recycled Content (For Non-Pressure pplications) PC CHEDULE 40 (WHE) PLN END M F 1760 MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) PC x PC x PC x PC x PC x PC x NF Listed. Meets ll Requirements of M D 4396 and M F ll products manufactured by Charlotte Pipe and Foundry Company are proudly made in the U... esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death. R ep C - D W P P E 7
8 Pipe Data PC chedule 40 DW Pipe PC chedule 40 DW Pipe PC CHEDULE 40 (WHE) PLN END PC 1120 M D 2665 W. PER PR NO. NOM. ZE UPC # QY. PER G. OD MN. WLL 100 F KD (N.) (N.) (LB.) PC 7100* x PC 7100* x PC 7112* x PC 7112* x PC 7200* 2 x PC 7200* 2 x PC 7300* 3 x PC 7300* 3 x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x PC x * Dual Marked M D 1785 & M D riple Marked M D 1785 & M D 2665 & M F 480. NF Listed. Meets ll Requirements of M D 1784, M D 1785, and M D esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death.
9 Pipe Data PC ewer Pipe PC DR 35 PM Pipe M D 3034 & M F 477 DR-35 GKEED - P 46 PR NO. NOM. ZE UPC # QY. PER LYNG W. PER G. OD MN. WLL KD LENGH 100 F. (LB.) (N.) (N.) /M 6004G 4 x /M 6004G 4 x /M 6006G 6 x /M 6006G 6 x /M 6008G 8 x Weight is approximate and is for shipping purposes only. DR-35 OLEN WELD - P 46 PR NO. NOM. ZE UPC # QY. PER LYNG W. PER G. OD MN. WLL KD LENGH 100 F. (LB.) (N.) (N.) /M x /M x /M x /M x Weight is approximate and is for shipping purposes only. P C E W E R P P E Meets ll Requirements of M D DR 35 Gaskets meet or exceed M F 477. Gasketed joints meet M D NO FOR PREURE Do not use PC ewer pipe for pressure applications. he use of sewer pipe in pressure applications may result in system failure and property damage. esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death. 9
10 Pipe Data PC ewer and Drain Pipe PC M D 2729 Pipe OLEN WELD BELLED END M D 2729 PR NO. NOM. ZE UPC # QY. PER G. OD MN. WLL BELL DEPH W. PER KD (N.) (N.) (N.) 100 F. (LB.) PC x PC x Perforated PC M D 2729 Pipe OLEN WELD BELLED END M D 2729 PR NO. NOM. ZE UPC # QY. PER G. OD MN. WLL BELL DEPH W. PER KD (N.) (N.) (N.) 100 F. (LB.) PC 30030P 3 x PC 30040P 4 x Perforated pipe is supplied with two rows of 1/2 diameter holes every five inches. Rows are parallel to the pipe axis and are 120 apart. Weight is approximate and is for shipping purposes only. Pipe listed in this section meets or exceeds the requirements of MD ll products manufactured by Charlotte Pipe and Foundry Company are proudly made in the U... NO FOR PREURE Do not use PC ewer pipe for pressure applications. he use of sewer pipe in pressure applications may result in system failure and property damage. Failure to follow safety precautions may result in misapplication or improper installation and testing which can cause severe personal injury and / or property damage. Primers and cements are extremely flammable and may be explosive. Do not store or use near heat or open flame, or death or serious injury may occur. heavier than air and may be trapped in newly installed piping systems. may result in injury or death from explosion or fire. instructions pertaining to primers and cements. with cements, primers and new piping systems. 10
11 PC and B DW Fittings HUB DMENON B ZE B C D PC ZE B C D P C & B D W F N G 11
12 PC and B DW Fittings PR NO. 100 Coupling HUB X HUB ZE B (F) (F) PR NO. 101 Female dapter ZE FP X HUB (F) (F) 3 3 PR NO. 101X Female dapter with Cleanout Plug FP X HUB ZE 8** ee Part No. 101 and (F) 12 (F) (F) Fabricated ** ssembled from two molded components Note: hading indicates available in PC only. 12
13 PC and B DW Fittings PR NO. 102 Pipe ncreaser Reducer HUB X HUB ZE N x x x x x x x x x x 10** x 12** 4 x 14 (F) x 16 (F) x x 12** x 14 (F) 6 x 16 (F) 8 x x x 14 (F) x 16 (F) x x 14 (F) x 16 (F) x 14 (F) x 16 (F) x 16 (F) P C & B D W F N (F) Fabricated ** ssembled from two molded components Note: hading indicates available in PC only. 13 G
14 PC and B DW Fittings PR NO. 103 rap dapter Male, Less Washer & Metal Nut PGO X LP ZE x PR NO. 103P rap dapter Male, with Washer & Polyethylene Nut PGO X LP ZE x PR NO. 103R rap dapter Male, with Plastic Nut & Washer & x Washer PGO X LP WH PLC NU ZE PR NO. 103W rap dapter Male, with Washer & Plastic Nut PGO X LP WH PLC NU ZE x Note: hading indicates available in PC only. 14
15 PC and B DW Fittings PR NO. 103X rap dapter Male, with Washer & Chrome Nut PGO X LP ZE x PR NO. 104 rap dapter Female NOE: NO MLE DPER. ZE x HUB X LP PR NO. 104P rap dapter Female, with Washer & Plastic Nut ZE x PR NO. 104R* HUB X LP rap dapter Female, with Plastic Nut & Washer & x Washer HUB X LP WH PLC NU ZE * 3 P C & B D W F N * vailable in B only Note: hading indicates available in PC only. 15 G
16 PC and B DW Fittings PR NO. 104W rap dapter Female, with Washer & Plastic Nut HUB X LP WH PLC NU ZE x PR NO. 104X rap dapter Female, with Washer & Chrome Nut HUB X LP ZE x PR NO. 105 Fitting Cleanout dapter PGO X FP ZE B PR NO. 105X Fitting Cleanout dapter with Cleanout Plug PGO X FP ZE For dimensions see part numbers 105 and (F) (F) (F) (F) Fabricated Note: hading indicates available in PC only. 16
17 PC and B DW Fittings PR NO. 106 Cleanout Plug MP ZE B * PR NO. 107 Flush Bushing PGO X HUB C ZE x x x x x x x x x x x 4** 10 x 6** x x 4** x 6** x x * vailable in B only ** ssembled from two molded components Note: hading indicates available in PC only. 17 P C & B D W F N G
18 PC and B DW Fittings PR NO. 107 Concentric Reducer Bushing PR NO. 108 Flush Bushing (Cleanout dapter) PGO X FP ZE C 2 x x 6 (CP) x x PR NO. 108X PGO X HUB C ZE 14 x 4 (F) 8 14 x 6 (F) 14 x 8 (F) 14 x 10 (F) x 12 (F) x 4 (F) x 6 (F) x 8 (F) x 10 (F) x 12 (F) x 14 (F) Flush Bushing (Cleanout dapter) with Plug PGO ZE B C 10 x 8 For dimensions see part numbers 106 & x 8 (F) Fabricated (CP) PC 108, 8 x6 is available only as a component part of PC 444X. Note: hading indicates available in PC only. 18
19 PC and B DW Fittings PR NO. 109 Male dapter MP X HUB NOE: NO RP DPER. WLL NO CCEP L PECE ZE EE PR NUMBER x (Octagon shoulders for tightening purposes.) PR NO. 110 Flush Cleanout Plug ZE PR NO. 111 Male Fitting dapter MP X PGO ZE B x PR NO. 113 ray Plug dapter HUB ZE B P C & B D W F N Note: hading indicates available in PC only. 19 G
20 PC and B DW Fittings PR NO. 113* ray Plug dapter PGO ZE B PR NO. 114* hreaded Cap FP ZE * 3 4 PR NO. 115 dapter Coupling DR 35 HUB X DW HUB ZE 8 (F) (F) x 8 (F) (F) 1 PR NO. 116 Cap OCKE ZE C (F) (F) * vailable in B only (F) Fabricated Note: hading indicates available in PC only. 20
21 PC and B DW Fittings PR NO. 117 dapter Coupling (dapts ewer and Drain pigot to DW pigot) ZE 3 x x x HUB X HUB PR NO. 117X dapter Coupling (dapts ewer and Drain pigot to DW Hub) HUB X PG ZE 4 x PR NO. 118 dapter Bushing (dapts DW Hub to ewer and Drain pigot) DW PGO X HUB ZE B PR NO. 119 No-Hub dapter (dapts Cast ron No-Hub pigot to DW pigot) PGO X HUB ZE x x P C & B D W F N Note: hading indicates available in PC only. 21 G
22 PC and B DW Fittings PR NO. 120 dapter Bushing DW PGO X DR 35 HUB ZE 8 (F) (F) (F) 5 8 PR NO. 122 pigot dapter, Cast ron (dapts Cast ron pigot to DW pigot) HUB X HUB ZE 2 x x x PR NO. 123 Hub dapter, Cast ron (dapts DW pigot to Cast ron Hub) HUB X PGO ZE 2 x 2 (P) x 3 (P) x 4 (P) PR NO. 123R Hub dapter, Cast ron, ncreaser (dapts DW pigot to Cast ron Hub) ZE x 2 (P) x 4 (P) 4 HUB X PGO (P) Plain End: Joint can be made with compression gasket only. (F) Fabricated Note: hading indicates available in PC only. 22
23 PC and B DW Fittings PR NO. 130 Repair Coupling HUB X HUB ZE (F) (F) (F) 12 3 PR NO. 131 ZE est Cap (C1) PR NO. 132 Outside Diameter est Cap (C2) ZE P C & B D W F (C1) nserts into pipe (C2) nserts over pipe (F) Fabricated Note: hading indicates available in PC only. 23 N G
24 PC and B DW Fittings PR NO /4 Bend (anitary 90 Ell) LL HUB ZE ** 11 12** (F) (F) 18 9 PR NO. 300 hort 1/4 Bend (90 Ell) LL HUB ZE B 8 (N) (N) (N) 7 5 PR NO. 300R 1/4 Bend, Reducing LL HUB ZE B 2 x (F) Fabricated (N) Not a sanitary pattern ** ssembled from two molded components Note: hading indicates available in PC only. 24
25 PC and B DW Fittings PR NO /4 Bend with ide nlet HUB X HUB ZE B C 3 x 3 x x 3 x PR NO. 301 ent 1/4 Bend, treet HUB X PGO ZE B 8 (F) (F) (F) PR NO /4 Bend, treet (anitary 90 treet Ell) PGO X HUB ZE B (F) (F) (F) (F) (F) Fabricated Note: hading indicates available in PC only. 25 P C & B D W F N G
26 PC and B DW Fittings PR NO /4 Bend, with Low Heel nlet LL HUB ZE B 3 x 3 x x 3 x x 4 x PR NO. 304 Long weep 1/4 Bend HUB X HUB ZE PR NO. 305 Long weep 1/4 Bend with High Heel nlet LL HUB ZE B C 3 x 3 x Note: hading indicates available in PC only. 26
27 PC and B DW Fittings PR NO. 307 Long weep 1/4 Bend with Low Heel nlet LL HUB ZE B 3 x 3 x 1 1 2* x 3 x PR NO. 309 Long weep 1/4 Bend, treet HUB X PGO ZE B PR NO /4 Bend, treet with Low Heel nlet HUB X PGO X HUB ZE B C 3 x 3 x PR NO. 311 Long weep 1/4 Bend, with ide nlet LL HUB ZE B C 3 x 3 x P C & B D W F N * vailable in B only Note: hading indicates available in PC only. 27 G
28 PC and B DW Fittings PR NO /6 Bend (60 Ell) HUB X HUB ZE PR NO /6 Bend, treet (60 treet Ell) HUB X PGO ZE B PR NO /8 Bend (45 Ell) HUB X HUB ZE (F) (F) 10 5 (F) Fabricated Note: hading indicates available in PC only. 28
29 PC and B DW Fittings PR NO /8 Bend, treet (45 treet Ell) PGO X HUB ZE B (F) (F) PR NO /16 Bend ( Ell) HUB X HUB ZE (F) (F) 5 13 P C & B D W F N (F) Fabricated Note: hading indicates available in PC only. 29 G
30 PC and B DW Fittings PR NO /16 Bend, treet ( treet Ell) PGO X HUB ZE B (F) (F) (F) (F) (F) PR NO. 327 Double 1/4 Bend LL HUB ZE B x x (F) Fabricated Note: hading indicates available in PC only. 30
31 PC and B DW Fittings PR NO /32 Bend HUB X HUB ZE 8 (F) (F) (F) 5 11 PR NO. 329 Closet Bend, Reducing HUB X HUB ZE B 3 x PR NO. 330 Closet Bend, Reducing HUB X PGO ZE B 3 x PR NO. 330X* Closet Bend, Reducing with est Cap HUB X PGO ZE B 3 x 4* P C & B D W F N (F) Fabricated * vailable in B only Note: hading indicates available in PC only. 31 G
32 PC and B DW Fittings PR NO. 331 ent Ell (90 hort urn Ell) HUB X HUB ZE PR NO. 333 ent Ell, treet (90 hort urn treet Ell) HUB X PGO ZE B PR NO. 400 anitary ee LL HUB ZE B Note: hading indicates available in PC only. 32
33 PC and B DW Fittings PR NO. 400 traight ee LL HUB ZE B C E 8 (N) (N) (N) (N)(F) (N)(F) PR NO. 401 anitary ee, Reducing LL HUB ZE B C 2 x x x x x 2 x x 3 x x 3 x x 4 x x 4 x x 4 x x 6 x x 8 x 4** x 8 x 6** P C & B D W F (F) Fabricated (N) Not a sanitary pattern ** ssembled from two molded components Note: hading indicates available in PC only. 33 N G
34 PC and B DW Fittings PR NO. 401 traight ee, Reducing LL HUB ZE B C 8 x 8 x 4 (N) ** x 8 x 6 (N) ** x 10 x 4 (N) ** x 10 x 6 (N) ** x 10 x 8 (N) x 12 x 4 (N) *** x 12 x 6 (N) ** x 12 x 8 (N) x 12 x 10 (N) x 14 x 4 (N)(F) x 14 x 6 (N)(F) x 14 x 8 (N)(F) x 14 x 10 (N)(F) x 14 x 12 (N)(F) x 16 x 4 (N)(F) x 16 x 6 (N)(F) x 16 x 8 (N)(F) x 16 x 10 (N)(F) x 16 x 12 (N)(F) x 16 x 14 (N)(F) PR NO. 403 anitary ee, treet PGO X HUB X HUB ZE B C (F) Fabricated (N) Not a sanitary pattern ** ssembled from two molded components *** ssembled from three molded components Note: hading indicates available in PC only. 34
35 PC and B DW Fittings PR NO. 404 anitary ee, treet Reducing PGO X HUB X HUB ZE B C 2 x x 1 1 2* x x 2* x 2 x x 3 x x 3 x x 4 x PR NO. 410 ee Cross LL HUB ZE B C 6 x 6 x 4 x 4 (F) x 6 x 6 x 6 (F) x 8 x 4 x 4 (F) x 8 x 6 x 6 (F) x 8 x 8 x 8 (F) x 10 x 4 x 4 (F) x 10 x 6 x 6 (F) x 10 x 8 x 8 (F) x 10 x 10 x 10 (F) x 12 x 4 x 4 (F) x 12 x 6 x 6 (F) x 12 x 8 x 8 (F) x 12 x 10 x 10 (F) x 12 x 12 x 12 (F) P C & B D W F N (F) Fabricated * vailable in B only Note: hading indicates available in PC only. 35 G
36 PC and B DW Fittings PR NO. 416 anitary ee with Left ide nlet LL HUB ZE B C 3 x 3 x 3 x x 3 x 3 x x 4 x 4 x PR NO. 417 anitary ee with Right ide nlet LL HUB ZE B C 3 x 3 x 3 x x 3 x 3 x x 4 x 4 x PR NO. 418 anitary ee with Left & Right ide nlets LL HUB ZE B C 3 x 3 x 3 x 2 x x 4 x 4 x 2 x Note: hading indicates available in PC only. 36
37 PC and B DW Fittings PR NO. 428 Double anitary ee (anitary Cross) LL HUB ZE B PR NO. 429 Double anitary ee, Reducing (anitary Cross) LL HUB ZE B C 2 x 2 x x x 3 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x PR NO. 431 Double anitary ee treet, Reducing (anitary Cross) PGO X HUB X HUB X HUB ZE B C 3 x 3 x x P C & B D W F N Note: hading indicates available in PC only. 37 G
38 PC and B DW Fittings PR NO. 438 Double anitary ee with ide nlet (anitary Cross) LL HUB ZE B C 3 x 3 x 3 x 3 x x 4 x 4 x 4 x PR NO. 439 Double anitary ee with Left & Right ide nlets (anitary Cross) LL HUB ZE B C 3x3x3x3x2x x4x4x4x2x PR NO. 441 ent ee LL HUB ZE B Note: hading indicates available in PC only. 38
39 PC and B DW Fittings PR NO. 444X Cleanout ee with Cleanout Plug HUB X HUB X FP ZE B C x 6 x 4** x 8 x 4 (F) x 8 x 6*** (F) x 10 x 4 (F) x 10 x 6 (F) x 10 x (F) x 12 x 4 (F) x 12 x 6** x 12 x x 12 x 10 (F) ee Part No. 106 for plug dimensions. P C & B D W F (F) Fabricated ** ssembled from two molded components *** ssembled from three molded components Note: hading indicates available in PC only. 39 N G
40 PC and B DW Fittings PR NO. 445 Cleanout ee HUB X HUB X FP ZE B C x 8 x 4 (F) x 8 x 6 (F) (F) x 10 x 4 (F) x 10 x 6 (F) x 10 x (F) x 12 x 4 (F) x 12 x 6 (F) x 12 x x 12 x 10 (F) PR NO. 445X Flush Cleanout ee with Cleanout Plug For dimensions see Part Numbers 445 and 110. (F) Fabricated Note: hading indicates available in PC only. 40
41 PC and B DW Fittings PR NO. 447 Horizontal win ee LL HUB ZE B C D 3 x 3 x x PR NO. 448 wo-way Cleanout LL HUB ZE PR NO. 449 anitary ee with 2 Left Hand anitary nlet on Center LL HUB ZE B PR NO. 500 Double Fixture Fitting LL HUB ZE B C x x x x x 2 x 2* x 2 x x x 2 x 3 x 3* * vailable in B only Note: hading indicates available in PC only. 41 P C & B D W F N G
42 PC and B DW Fittings PR NO. 501 Combination Wye & 1/8 Bend (One Piece) LL HUB ZE B C PR NO. 502 Combination Wye & 1/8 Bend, Reducing (One Piece) LL HUB ZE B C 2 x x x 2 x x 3 x x 3 x x 4 x x 4 x PR NO. 503 Combination Wye & 1/8 Bend (wo Pieces) LL HUB ZE B C 6** ** ** ** (F) 16 (F) (F) Fabricated ** ssembled from two molded components Fitting shipped with any required bushing(s) installed, molded components. Note: hading indicates available in PC only. 42
43 PC and B DW Fittings PR NO. 504 Combination Wye & 1/8 Bend, Reducing (wo Pieces) LL HUB ZE B C 6 x 6 x x 6 x 4 (1) x 8 x x 8 x x 10 x x 10 x x 10 x x 12 x x 12 x x 12 x x 12 x x 14 x 4 (F) 14 x 14 x 6 (F) 14 x 14 x 8 (F) 14 x 14 x 10 (F) 14 x 14 x 12 (F) 16 x 16 x 4 (F) 16 x 16 x 6 (F) 16 x 16 x 8 (F) 16 x 16 x 10 (F) x 16 x 12 (F) 16 x 16 x 14 (F) (F) Fabricated (1) One piece short pattern Fitting shipped with any required bushing(s) installed, molded components. Note: hading indicates available in PC only. 43 P C & B D W F N G
44 PC and B DW Fittings PR NO. 507 Double Combination Wye & 1/8 Bend (hree Pieces or Five Pieces) LL HUB ZE B C x 2 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x x 6 x 4 x PR NO. 515 Combination Wye & 1/8 Bend with Left ide nlet LL HUB ZE B C D E 3 x 3 x 3 x PR NO. 516 Combination Wye & 1/8 Bend with Right ide nlet LL HUB ZE B C D E 3 x 3 x 3 x Fitting shipped with any required bushing(s) installed, molded components. Note: hading indicates available in PC only. 44
45 PC and B DW Fittings PR NO. 517 Combination Wye & 1/8 Bend with Left & Right ide nlets LL HUB ZE B C D E 3x3x3x2x PR NO. 600 Wye (45 Wye) LL HUB ZE B C (F) (F) P C & B D W F N (F) Fabricated Note: hading indicates available in PC only. 45 G
46 PC and B DW Fittings PR NO. 601 Wye, Reducing (45 Wye) LL HUB ZE B C 2 x x x x x 2 x x 3 x x 3 x x 4 x x 4 x x 4 x x 6 x x 6 x x 8 x 4** x 8 x x 10 x 4** x 10 x 6** x 10 x x 12 x 4** x 12 x 6** x 12 x x 12 x x 14 x 4 (F) x 14 x 6 (F) x 14 x 8 (F) x 14 x 10 (F) x 14 x 12 (F) x 16 x 4 (F) x 16 x 6 (F) x 16 x 8 (F) x 16 x 10 (F) x 16 x 12 (F) x 16 x 14 (F) (F) Fabricated ** ssembled from two molded components. Note: hading indicates available in PC only. 46
47 PC and B DW Fittings PR NO. 602 Wye, treet (45 Wye) PGO X HUB X HUB ZE B C PR NO. 603 Wye, treet, Reducing (45 Wye) PGO X HUB X HUB ZE B C 3 x 3 x x 3 x x 4 x x 4 x PR NO. 611 Double Wye (Double 45 Wye) LL HUB ZE B C (F) (F) (F) (F) P C & B D W F N (F) Fabricated Note: hading indicates available in PC only. 47 G
48 PC and B DW Fittings PR NO. 611 Double Wye with 2 ide nlet (Double 45 Wye) LL HUB ZE B C D 3 x 3 x 3 x PR NO. 612 Double Wye, Reducing (Double 45 Wye) LL HUB ZE B C 2 x 2 x x x 3 x x x 3 x 2 x x 4 x 2 x x 4 x 3 x x 6 x 4 x 4** x 8 x 4 x 4 (F) x 8 x 6 x 6 (F) x 10 x 4 x 4 (F) x 10 x 6 x 6 (F) x 10 x 8 x 8 (F) x 12 x 4 x 4 (F) x 12 x 6 x 6 (F) x 12 x 8 x 8 (F) x 12 x 10 x 10 (F) x 14 x 4 x 4 (F) 14 x 14 x 6 x 6 (F) x 14 x 8 x 8 (F) x 14 x 10 x 10 (F) x 14 x 12 x 12 (F) x 16 x 4 x 4 (F) 16 x 16 x 6 x 6 (F) x 16 x 8 x 8 (F) x 16 x 10 x 10 (F) x 16 x 12 x 12 (F) x 16 x 14 x 14 (F) (F) Fabricated ** ssembled from two molded components. Note: hading indicates available in PC only. 48
49 PC and B DW Fittings PR NO. 625 Wye with Left ide nlet LL HUB ZE B C D E 3 x 3 x 3 x x 4 x 4 x PR NO. 626 Wye with Right ide nlet LL HUB ZE B C D E 3 x 3 x 3 x x 4 x 4 x PR NO. 700 Return Bend HUB X HUB ZE B C Note: hading indicates available in PC only. 49 P C & B D W F N G
50 PC and B DW Fittings PR NO. 704P* ail Piece dapter with Plastic Nut & Packing Ring PGO X LP ZE 1 1 2* 2 3 PR NO. 706X P-rap with olvent Weld Joint HUB X HUB ZE B C PR NO. 707X P-rap with Cleanout & olvent Weld Joint HUB X HUB ZE B C PR NO. 708P P-rap with Union & Plastic Nut HUB X HUB ZE B C * vailable in B only Note: hading indicates available in PC only. 50
51 PC and B DW Fittings PR NO. 708X P-rap with Union & Chrome Nut HUB X HUB ZE B C PR NO. 709X P-rap with Cleanout, Union & Chrome Nut HUB X HUB ZE B C PR NO. 710 Low Profile P-rap with olvent Weld HUB X HUB ZE B C PR NO. 711P L.. Pattern P-rap with Union & Polyethylene Nut LP X HUB ZE B C PR NO. 711W L.. Pattern P-rap with Union & Plastic Nut LP X HUB ZE B C Note: hading indicates available in PC only. 51 P C & B D W F N G
52 PC and B DW Fittings PR NO. 711X L.. Pattern P-rap with Union & Chrome Nut LP X HUB ZE B C PR NO. 720X Drum rap HUB X HUB ZE B 3 x 6 x PR NO. 800 & 800K Closet Flange HUB END ZE B C 4 x x PR NO. 800 Closet Flange with top HUB END ZE B C D 4 x 3* PR NO. 801 Closet Flange, Reducing PGO ZE B C D 4 x x4 not available in B * vailable in B only Note: hading indicates available in PC only. 52
53 PC and B DW Fittings PR NO. PC 810K Closet Flange, djustable with Plastic Ring HUB END ZE B C 4 x PR NO. B 811P* Closet Flange, djustable with Plastic Ring HUB END ZE B C 4 x 3* x 4* PR NO. 811 Closet Flange, djustable with Metal Ring HUB END ZE B C 4 x x PR NO. 811K Closet Flange, djustable with Metal Ring HUB END ZE B C 4 x PR NO. 812 Closet Flange, djustable with Metal Ring PGO ZE B C 4 x x P C & B D W F N * vailable in B only Note: hading indicates available in PC only. 53 G
54 PC and B DW Fittings PR NO. 812P Closet Flange, djustable with Plastic Ring PGO ZE B C 4 x x PR NO. 815 Flush Closet Flange (Fits Over 3 Pipe or nside 4 Pipe) HUB ZE B C 4 x 4 / 4 x PR NO. 815K Flush Closet Flange with Knockout (Fits Over 3 Pipe or nside 4 Pipe) HUB ZE B C 4 x 4 / 4 x PR NO. 820 Offset Closet Flange, djustable with Metal Ring (1 1 2 Offset) HUB ZE B C D E 4 x PR NO. 820P Offset Closet Flange, djustable with Plastic Ring (1 1 2 Offset) HUB ZE B C D E 4 x Note: hading indicates available in PC only. 54
55 PC and B DW Fittings PR NO. 824* Closet Flange, djustable with Metal Ring & 4 Extended pigot PGO ZE B C 4* PR NO. 900* wivel ray Plug dapter with Washer PG X FP ZE B 1 1 2* PR NO. 900X* wivel ray Plug dapter with Washer, Extended PG X FP ZE B 1 1 2* PR NO. 910* wivel ray Plug dapter with Washer H X FP ZE B 1 1 2* P C & B D W F N G * vailable in B only 55
56 Pipe Data hin Wall PC DW Pipe PC hin Wall chedule 30 Pipe PC CHEDULE 30 (White) PLN END M D 2949 MN. W. PER PR NO. NOM. ZE UPC # QY. PER G. OD WLL 100 F KD (N.) (N.) (LB.) PC x Weight is approximate and is for shipping purposes only. Pipe listed in this section meets or exceeds the requirements of M D ll products manufactured by Charlotte Pipe and Foundry Company are proudly made in the U... esting with or use of compressed air or gas in PC / B / CPC pipe or fittings can result in explosive failures and cause severe injury or death. 56
57 PC hin Wall chedule 30 Fittings HUB DMENON H N PC hin Wall CH 30 Fittings Hub Dimensional olerances ZE B C D O.D. ±.008 ±.008 MN. MN. P Hub Dimensional olerances ZE B C D /-.005 ±.006 MN. MN /-.005 ±.006 MN. MN /-.005 ±.008 MN. MN /-.005 ±.009 MN. MN. W L L P C D W 57
58 PC hin Wall chedule 30 Fittings PR NO. PC 1100 Coupling HUB X HUB ZE B C PR NO. PC 1101 Female dapter FP X HUB ZE B C PR NO. PC 1102 Pipe ncreaser-reducer HUB X HUB ZE B C N x x x PR NO. PC 1105X Fitting Cleanout dapter with Cleanout Plug PGO ZE B PR NO. PC 1109 Male dapter MP X HUB ZE B C
59 PC hin Wall chedule 30 Fittings PR NO. PC 1112 Reducer Bushing HUB X PGO ZE B C 3 x x x PR NO. PC 1116 Cap OCKE ZE C H N PR NO. PC 1117 dapter Coupling (dapts &D Hub to DW Hub) PGO X PGO ZE 4 x 3 9 PR NO. PC 1129 Hub dapter (dapts 3 P Hub to 3 hin Wall Pipe) PGO X HUB ZE B 3 x W L L P C D W PR NO. PC 1130 Repair Coupling HUB X HUB ZE
60 PC hin Wall chedule 30 Fittings PR NO. PC /4 Bend HUB X HUB ZE B PR NO. PC /4 Bend, treet PGO X HUB ZE B C PR NO. PC /6 Bend HUB X HUB ZE PR NO. PC /8 Bend HUB X HUB ZE B PR NO. PC /8 Bend, treet PGO X HUB ZE B C
61 PC hin Wall chedule 30 Fittings PR NO. PC 1324 ZE 3 1/16 Bend HUB X HUB 11 PR NO. PC 1400 anitary ee HUB X HUB ZE B C PR NO. PC 1401 anitary ee, Reducing HUB X HUB ZE B C D E 3 x x PR NO. PC 1418 anitary ee with Right & Left ide nlets LL HUB ZE B C 3 x 3 x 3 x x x 3 x 3 x 2 x H N W L L P C D W 61
62 PC hin Wall chedule 30 Fittings PR NO. PC 1429 Double anitary ee, Reducing HUB X HUB ZE B C D E 3 x PR NO. PC 1444X Cleanout ee with Cleanout Plug HUB X HUB X FP ZE B C ee Part No. 106 for plug dimensions. PR NO. PC 1600 Wye HUB X HUB ZE B C D PR NO. PC 1601 Wye, Reducing HUB X HUB ZE B C D E 3 x x PR NO. PC 1611 Double Wye HUB X HUB ZE B C D
63 PC hin Wall chedule 30 Fittings PR NO. PC 1800 Closet Flange HUB ZE B C D 4 x PR NO. PC 1800K Closet Flange HUB ZE B C D 4 x PR NO. PC 1811 Closet Flange, djustable with Metal Ring HUB ZE B C D 4 x PR NO. PC 1812 Closet Flange, djustable with Metal Ring PGO ZE B C D 4 x H N W L L P C D W 63
64 Certification his is to certify that all Plastic Pipe and Fittings manufactured by Charlotte Pipe and Foundry Company are manufactured in the United tates and conform to the following standards: PC CH. 40 OLD WLL PPE M D 1784, M D 1785, M D 2665 FH UM 79a FEDERL PECFCON L-P-320a NF NDRD NO. 14 ND 61 PC CH. 40 DW CELLULR CORE PPE M D 4396, M F 891 NF NDRD NO. 14 RePC CH. 40 DW PPE M D 4396, M F 1760 NF NDRD NO. 14 PC CH. 40 DW FNG M D 1784, M D 2665, M D 3311, M F 1866 FH UM 79a FEDERL PECFCON L-P-320a NF NDRD NO. 14 PC DR-21 ND DR-26 PREURE PPE M D 1784, M D 2241 NF NDRD NO. 14 ND 61 PC CH. 40 PREURE FNG M D 1784, M D 2466 NF NDRD NO. 14 ND 61 PC CH. 40 WELL CNG PPE M D 1784, M F 480 NF NDRD NO. 14 ND 61 PC CH. 80 PPE M D 1784, M D 1785, PC 1120 NF NDRD NO. 14 ND 61 PC CH. 80 FNG M D 1784, M D 2467, M D 2464, M F 1970 NF NDRD NO. 14 ND 61 64
65 Certification PC DR 35 EWER MN PPE M D 1784, M D 3034 DR 35 M D 3212, M F 477 PC EWER ND DRN PPE M D 1784, M D 2729 PC HN WLL PPE & FNG M D 1784, M D 2949 NF NDRD NO. 14 CPC FLOWGURD GOLD C PPE & FNG M D 1784, M D 2846 FH UM-61a NF NDRD NO. 14. ND 61 C LED ON PECFED EM CPC REUZE C PPE M D 1784, M D 2846 NF NDRD NO. 14. CPC CHEMDRN CH. 40 PPE & FNG M D 1784, M F 2618 NF NDRD NO. 14 B CH. 40 DW CELLULR CORE PPE M D 3965, M F 628 NF NDRD NO. 14 B PLU CH. 40 DW CELLULR CORE PPE M D 3965, M D 4396, M F 1488 NF NDRD NO. 14. B CH. 40 DW FNG M D 3965, M D 2661, M D 3311 FH UM 79a FEDERL PECFCON L-P-322b NF NDRD NO. 14 C E R F C O N 65
66 LMED WRRNY Charlotte Pipe and Foundry Company (Charlotte Pipe ) Products are warranted to be free from manufacturing defects and to conform to currently applicable M standards for a period of five (5) years from date of delivery. Buyer s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. his warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. his limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty. his Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe. his Limited Warranty will not apply if: 1) he Products are used for purposes other than their intended purpose as defined by local plumbing and building codes, and the applicable M standard. 2) he Products are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by Charlotte Pipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements. 3) his limited warranty does not apply when the products of Charlotte Pipe are used with the products of other manufacturers that do not meet the applicable M or CP standards or that are not marked in a manner to indicate the entity that manufactured them. 4) he Products fail due to defects or deficiencies in design, engineering, or installation of the piping system of which they are a part. 5) he Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe. 6) he Products fail due to the freezing of water in the Products. 7) he Products fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents that are not compatible. 8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the surface of Charlotte PC, B or CPC products with solvent cement or adhesive glue. Charlotte Pipe products are manufactured to the applicable M or CP standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry. ny Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at the following address for verification, inspection and determination of cause: Charlotte Pipe and Foundry Company ttention: echnical ervices 2109 Randolph Road Charlotte, North Carolina esting with or use of compressed air or gas in PC / B / CPC / Cast ron pipe or fittings can result in explosive failures and cause severe injury or death. Purchaser must obtain a return materials authorization and instructions for return shipment to Charlotte Pipe of any product claimed defective or shipped in error. ny Charlotte Pipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of Charlotte Pipe. 4/15/10 Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company. 66
67 his catalog accurately reflects dimensional information to the best of our knowledge. f the dimensions on your job are critical, please verify dimensional information with our factory. his dimensional catalog accurately reflects our product line at the time the catalog was printed. However, we add and delete items on an ongoing basis to better serve our customers. Please refer to our current list price sheets for an accurate listing of items offered. Charlotte Pipe products are manufactured to the applicable M standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry. 67
68 PO BOX CHRLOE NORH CROLN PHONE (704) (800) FX (800) LERURE BY FX (800)
DWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
DMENONL CLOG B-DW Pipe and Fittings PC-DW Pipe and Fittings PC ewer Pipe PC chedule 30 DW hin Wall 3.25 in. O.D. Pipe and Fittings (Updated July 2, 2014) DW DC-DW 1977-2014 Charlotte Pipe and Foundry Company
More informationPressure. PVC Schedule 80 Pipe and Fittings. PVC Schedule 40 Pipe and Fittings. FlowGuard Gold CPVC CTS Pipe and Fittings. ReUze CPVC CTS Pipe
MNONA CAAO PVC chedule 80 Pipe and Fittings Pressure PVC chedule 40 Pipe and Fittings Flowuard old CPVC C Pipe and Fittings ReUze CPVC C Pipe (Updated March, 20) 200-20 Charlotte Pipe and Foundry Company
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationABS DWV FITTINGS MARCH 1, 2017
LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website
More informationDiscount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut &
More informationPRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017
LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationABS DWV FITTINGS APRIL 1, 2013
LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for
More informationINSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER
1 INSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER 303-568 CHERNE INDUSTRIES INCORPORATED 1-800-THE PLUG 5700 LINCOLN DRIVE (1-800-843-7584) MINNEAPOLIS, MN 55436-1695 FAX: 1-800-843-7585 www.cherneind.com
More informationPREMIER, MARINE, & STANDARD
INSTA LLATION INSTRUCTION AND SERVICE MANUAL I TITAN 12" x 2" BRAKES FREE BACKING. UNI-SERVO. DUO-SERVO PREMIER, MARINE, & STANDARD Limited Warranty TITAN Inc. ("TITAN') warrants its products to be free
More informationMULTIPOSITION AIR CYLINDER
MULTIPOSITION AIR CYLINDER CAST ALUMINUM FOUR-POSITION - ALL AIR SERVICE INFORMATION MOUNTING! Devices should be mounted and positioned in such a manner that they cannot be accidentally operated. INSTALLATION
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationKit # NM, # Installation instructions: Note: do not tighten any clamps or nuts until the last step!!
KIT #680145-NM #8168740 3 Dual Exhaust Kit w/o mufflers page 1 This kit fits A-body, '67-74 Dart/Duster/Demon/Valiant, '67-69 Barracuda, all with V8, standard Hooker Competition headers (otherwise modifications
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices. Effective: February 15, 2016
Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016 x FPT x MPT SP x MPT SP x SJ w/plastic
More informationABS DWV FITTINGS JULY 1, 2011
LIST C10-11-109 JULY 1, 2011 SUPERSEDES C10-11-108 (APRIL 1, 2011) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS
ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationEffective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationType Flexair Pneumatic Pressure Control Valves
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Type Flexair Pneumatic Pressure Control Valves Catalog pages from
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationGuardian Steel Gear Shaft Coupling
Guardian Steel Gear Shaft Coupling P-8609-GC GUA-MRK-DOC-026 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS
More informationINSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE
INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationModel 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS
Model 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS INSTALLATION INSTRUCTIONS UNIVERSAL VALVE COMPANY, INC. 478 SCHILLER ST. ELIZABETH, NJ 07206 Rev A
More informationPrice List Effective March 19, 2012
Georg Fischer Harvel LLC 300 Kuebler Road Easton, PA 18040 USA Phone: (610) 252-7355 Fax: (610) 253-4436 harvel.gfh.ps@georgfischer.com www.harvel.com PRICES SUBJECT TO CHANGE WITHOUT NOTICE PRICE SHEET
More informationLU27 Series Quick Start
Ultrasonic Liquid Level Transmitter LU27 Series Quick Start 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f 562.431.8507
More informationProduct/ Title Guardian Super Flex Shaft Coupling Product/ Title
Product/ Title Guardian Super Flex Shaft Coupling Product/ Title GUA-MRK-DOC-027 P-XXXX-GC Service&&Installation Installation Instructions Instructions Service An Altra Industrial Motion Company TABLE
More informationSERIES 740 VALVES PNEUMATIC DIRECTIONAL CONTROL
SERIES 740 VALVES PNEUMATIC DIRECTIONAL CONTROL Specifications and features 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve TECHNICAL DATA: Port Sizes: Integrated Fittings for
More informationPFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250
PFS Rotameter 09/2018 Rev. 0 Variable Area Flowmeter Instruction Manual PFS-RM200, RM230, RM250 Please note: This instruction manual provides detailed information and instructions that must be read, understood
More informationInstallation Instructions and Service Manual
Installation Instructions and Service Manual Model 700LP/750LP (Low Profile) Actuator* for Trailer Brakes 7,000/7,500 lbs. Capacity Drum Brake Ready/Disc Brake Ready *US Patent No. 6,375,211 MODEL 700LP/750LP
More informationModel , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover
Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame
More informationThrough-Shaft Clutch-Brake LSCB-32HT, LSCB-32HT, LSCB-44, LSCB-44HT, LSCB-54HT FORM NO. L D-0606 MEX (55) QRO (442)
Through-Shaft Clutch-Brake LSCB-HT, LSCB-HT, LSCB-, LSCB-HT, LSCB-5HT In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationGuardian Taper Grid Shaft Coupling
Guardian Taper Grid Shaft Coupling P-8608-GC GUA-MRK-DOC-025 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS
More informationStraight-Bore Clutch LSCC-32, 44, 54
Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationOld Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2
Instructions - Parts Old Seal Kits 32348B To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions
More informationEchoPod. Technical Support. Model: DL14-(XX) Quick Start
Technical Support For complete product documentation, video training, and technical support, go to www.flowline.com. For phone support, call 562-598-3015 from 8am to 5pm PST, Mon - Fri. (Please make sure
More informationChevy LS-1 - LS-2 Serpentine Kit
Revised 9-8-08 Chevy LS-1 - LS-2 Serpentine Kit Installation Instructions Kit #20065 (Corvette LS-2 with Power Steering) Kit #20075 (Corvette LS-2 without Power Steering) Kit #20085 (LS-1 Motors with Power
More informationHATCHGRIP Installation Instructions/Operation and Maintenance Manual
HATCHGRIP Installation Instructions/Operation and Maintenance Manual Models: HTG-PCG Contact Information Table of Contents: Safety Precautions... 2 Product Information... 2 Operation... 3 Installation
More informationTurbine Submersible Pumps
www.hydroflopumps.com Investment Cast Stainless Steel Impellers Turbine Submersible Pumps Hydroflo Pumps USA, Inc. 18 Loblolly Pine Blvd. Fairview, Tennessee 362 Phone: 615-799-9662 Fax: 615-799-5654 Hydroflo
More informationUniversal Bevel Drives Service Manual
Engineering Service Bulletin #SB241202 Universal Bevel Drives Service Manual Cautions Following are some general cautions. All personnel shall use safe and sound practices and take all necessary precautionary
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS DECK MOUNTED EYE/FACEWASH Model S0730 / S0740
More informationTITAN 13 x 2½ BRAKES DUO-SERVO AND FREE BACKING
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationAquaflush. Z6000 Series Aquaflush Exposed Flushometer Installation, Operation, Maintenance, and Parts Manual Z6000 Z6003
Z6000 Series Exposed Flushometer Installation, Operation, Maintenance, and Parts Manual Patented and Patents Pending Z6000 ADA Z6003 Exposed Closet/Urinal Systems Z6000 Z6001 Z6003 Z6010 Z6014 Z6017 Z6096
More informationV400D VERIS Verabar (Double Rod) Installation and Maintenance Manual
V400D VERIS Verabar (Double Rod) Installation and Maintenance Manual 168-EN Please read and save these instructions Contents General Safety Information...3 Product Information...3 Section 1: Scope...3
More informationColor Change Valve. Instructions Parts List K
Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid
More informationGuardian HH Shaft Coupling
Guardian HH Shaft Coupling P-8611-GC GUA-MRK-DOC-028 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
More informationGuardian FH Flywheel Coupling
Guardian FH Flywheel Coupling P-8606-GC GUA-MRK-DOC-015 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
More informationA Member of the. Integrated Metering Technologies
I n s t a l l a t i o n M a n u a l A Member of the Integrated Metering Technologies 1.0 General and Safety Do not install, operate or maintain this flow meter without reading, understanding and followingthe
More informationModel 66/660* Actuator for Trailer Brakes 6,600 lbs Capacity Drum Brake Ready or Disc Brake Ready US Patent No. 6,375,211
Installation Instructions and Service Manual Model 66/660* Actuator for Trailer Brakes 6,600 lbs Capacity Drum Brake Ready or Disc Brake Ready US Patent No. 6,375,211 *Model 660 - Manufactured after March
More informationPneumatic Cylinder 14 Bore X 21 Stroke Part No. P Replaces Part No. P
Pneumatic Cylinder 14 Bore X 21 Stroke Part No. P -322908-00000 Replaces Part No. P-191067-00000 Service Information WARNING: INSTALLATION AND MOUNTING The user of these devices must conform to all applicable
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationInstallation Instructions and Service Manual
Installation Instructions and Service Manual Model 80 Actuator* for Trailer Brakes 8,00 lbs Capacity Drum Brake Ready Disc Brake Ready US Patents: 6,37,2 and 8,342,9 *Model 80 - Manufactured after March
More informationSingle-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationOutdoor Bottle Fillers
Outdoor Bottle Filler Pedestal Mounted Sensor/Pushbutton Activation M-OBF4 / M-OBFM4 TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER: 1.800.51.360 Technical Assistance Fax: 1.626.855.484 NOTES TO INSTALLER:
More informationHPx-JDx3-xx HARNESS INSTALLATION
HPx-JDx3-xx HARNESS INSTALLATION Conversion Manual 09040106b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationPneumatic Cylinder 14 Bore X 22 Stroke Part No. R (Formerly P )
Pneumatic Cylinder 14 Bore X 22 Stroke Part No. R434001268 (Formerly P -193419-00003) Service Information INSTALLATION Before installing this cylinder, all air lines in the system should be blown clean
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationTBM Series 3-Way Ball Valve
www.simtechusa.com TBM Series 3-Way Ball Valve Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 06-26-13 TBM Series Ball Valves SIMTECHRECOMMENDSREADINGTHEFOLLOWINGINFORMATIONPRIORTOINSTALLINGANDUSING
More informationMODEL HX. Fail Safe Hydraulic Actuator FEATURES INTRO AVAILABLE SIZES. Hydraulic Actuation
MODEL HX Fail Safe Hydraulic Actuator FEATURES Flexibility Model HX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be delivered with alternate
More informationLU23, LU28 & LU29 Series Quick Start
Ultrasonic Liquid Level Transmitter LU23, LU28 & LU29 Series Quick Start 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f
More informationPressurized oil drain for collection of used lubricants and anti-freeze.
Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure
More informationRevised Chevy LS-1 - LS-7 Serpentine Kit. Installation Instructions Kit #20050 (Corvette LS-1 with Power Steering)
Revised 12-13-08 Chevy LS-1 - LS-7 Serpentine Kit Installation Instructions Kit #20050 (Corvette LS-1 with Power Steering) LS-1/LS-2 Parts List 1-20051-A... Alternator Bracket Body 1 - S144... 5 16 x 7
More informationInstallation / Operation Instructions Sunnex ORION Series Exam Lights
Installation / Operation Instructions Sunnex ORION Series Exam Lights OR-120 OR-127 OR-220 OR-227 Models: OR-300 OR-400 OR-500 OR-600 1. APPLICATIONS The Sunnex ORION Series light was designed specifically
More informationDeZURIK 2 20" BOS BUTTERFLY VALVES
2 20" BOS BUTTERFLY VALVES Instruction D10459 October 2013 2-20 BOS Butterfly Valves Instructions These instructions provide information about BOS Butterfly Valves. They are for use by personnel who are
More informationEPIC. Express Line Proudly Manufactured in the USA by Check-All Valve. Rev. E
EPIC BY Express Line www.epiccheckvalves.com Proudly Manufactured in the USA by Check-All Valve Express Line EPIC By Check-All Valve In the beginning... the first Check-All valve was designed and built
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX CITY OF INDUSTRY, CA -0 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS EYEWASH / FACEWASH Models S00 / S00 / S00 / S00-CS-SSE /
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More informationAPCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES
APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES Instruction D12043 June 2016 DeZURIK Instructions These instructions provide installation, operation and maintenance information for APCO CRF-100A Rubber
More informationCW Optimizer Capacity Hat Kit. 75/80 and 80/40 Thunderbolt Vertical Antennas. for the DXE-7580-THK
CW Optimizer Capacity Hat Kit for the 75/80 and 80/40 Thunderbolt Vertical Antennas DXE-7580-THK DXE-7580-THK-INS Revision 1a DX Engineering 2012 P.O. Box 1491 Akron, OH 44309-1491 USA Phone: (800) 777-0703
More informationOWNERS MANUAL HF4263
OWNERS MANUAL HF4263 ADJUSTABLE AB / BACK HYPER BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0805-000 Customer Service (800)
More informationGuardian NV Flywheel Coupling
Guardian NV Flywheel Coupling P-8605-GC GUA-MRK-DOC-014 Service & Installation Instructions TABLE OF CONTENTS NOTICES AND WARNINGS PAGE 2 SECTION 1 COUPLING OVERVIEW PAGE 3 SECTION 2 TOOLS/MATERIALS REQUIRED
More informationAGCO. Corn Header Manual d HEADSIGHT.COM
AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationTONS. Before each shift: Before operating: Before initial operation of hoist:
LEVER HOIST 0.25 9 TONS Manual Notice It is the responsibility of the owner/user to install, inspect, test, maintain, and operate these lever hoists in accordance with ASME B30.21, Safety Standard for
More informationINSTALLATION AND MAINTENANCE MANUAL FORM #PM-126 REV A 12/09
HAND CRANK & MOTORIZED POWER CORD REELS: SERIES 1125PC SERIES: 1125PC HAND CRANK SERIES: 1125PC MOTORIZED COXREELS The technical data and images which appear in this manual are for informational purposes
More informationOWNERS MANUAL HF4261
OWNERS MANUAL HF4261 ADJUSTABLE AB BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0905-000 Customer Service (800) 548-5438 (858)
More informationOld Proportioning Pumps
Repair - Parts Old Proportioning Pumps 311391F For proportioning pumps on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in
More informationSpray Nozzle Adapters
INSTRUCTIONS-PARTS LIST 306 788 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. G Supersedes Rev. F DIRECTIONAL
More informationOWNERS MANUAL HF4550 PREACHER CURL. Customer Service (800) (858) Fax (858) RECORD SERIAL NUMBER HERE
OWNERS MANUAL HF4550 PREACHER CURL Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0805-001 Customer Service (800) 548-5438 (858) 578-7676
More informationAEROMOTIVE Part # Subaru STI Fuel Rails INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14136 04-06 Subaru STI Fuel Rails INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More informationGERINGHOFF. Corn Header Manual f HEADSIGHT.COM
GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More information(718)
1 of 19 PVCDWV 090418 P9599 P9512 P9513 P9555 P9514 P10435 P11483 P9805 P10072 P10831 P10797 P10554 Coupling (H H) (718) 566-1000 Female Adapter (FPT H) Reducing Female Adapter(HxFPT) Product(s) Part Number
More informationOWNERS MANUAL HF PAIR VERTICAL DUMBBELL RACK. Customer Service (800) (858) Fax (858) RECORD SERIAL NUMBER HERE
OWNERS MANUAL HF4459 5 PAIR VERTICAL DUMBBELL RACK Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0605-000 Customer Service (800) 548-5438
More informationEchoPod. DL10, DL14, DL24, DS14 & DX10 Series Quick Start. DL14-00 Shown Flowline, Inc. All Rights Reserved Made in USA
EchoPod Ultrasonic Level Switch, Controller & Transmitter DL10, DL14, DL24, DS14 & DX10 Series Quick Start DL14-00 Shown 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt
More informationJ 6 Se r i e s. Pressure and Vacuum switches. features
J 6 S er i es J 6 Se r i e s Pressure and Vacuum switches features Gasketed, Die Cast Aluminum Enclosure with Epoxy Coating SPDT Switch Output Adjustable Deadband Option Sealed, Isolated Metal Bellows
More information36" Galvanized Direct Drive Hyflo Fan Installation and Operators Instruction Manual. Fan and Framing Dimensions
6" Galvanized Direct Drive Hyflo Fan Installation and Operators Instruction Manual Fan and Framing Dimensions Planning the layout of the spacing between Fans is very important. Spacing too close together
More informationDRAGO. Corn Header Manual f HEADSIGHT.COM
DRAGO Corn Header Manual 09020801f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationSTYLE 624, 638 QUICK-ATTACK FOAM TUBE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
STYLE 624, 638 QUICK-ATTACK FOAM TUBE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS The following is intended to provide the basic instructions for installation, operation, and maintenance. Read
More informationTKD Series 3-Way Ball Valves Product Data Sheet
Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace
More information