BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
|
|
- Bathsheba Cameron
- 6 years ago
- Views:
Transcription
1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without notice. Copyright 218 TI-P45-51 EMM Issue 2 BBV utomatic or Manually ctuated Boiler Blowdown Valves DN15 to DN65 Description The BBV is specifically designed for the removal of suspended / deposited solids water from the bottom of steam boilers. The BBV is available in air / water actuated manual versions. The air / water-actuated version is supplied with a manual h lever. The valve is spring-to-close on power failure the manual version can easily be upgraded to an automatic version. When used with a Spirax Sarco blowdown controller the automatic version provides timed control of blowdown, ensuring that the recommended blowdown occurs with the minimum of heat loss avoids duplication omissions. The valve can be fitted with a mechanical switchbox. This can be linked to the blowdown controller or a BMS system to indicate when the valve has not closed. Principal features: - Easily upgraded from manual to automatic operation. - Dedicated self-adjusting self-cleaning spindle seals. - Engineered for the specific application of bottom blowdown. - Flow pressure assists closing. vailable types of boiler blowdown valve: ir / water pneumatically actuated supplied with a manual actuation lever BBV43 PN / M BBV63 PN / M BBV83 PN / M Steel body Stainless steel body lloy steel body Manually actuated complete with a manual actuation lever BBV43 M BBV63 M BBV83 M Steel body Stainless steel body lloy steel body Please note: ll of the 'M' versions can be automated to ' PN / M'. DN15 BBV_3 PN / M shown Optional extras: - utomatic bottom blowdown timer controller. - Mechanical switch (with mounting kit). - Pneumatic actuator upgrade kit. - Physical lock kit Stards This product range fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC. Certification This product is available with material certification to EN Note: ll certification / inspection requirements must be stated at the time of order placement. Size pipe connections: DN15, DN2, DN25, DN32, DN4, DN5 DN65 ½", ¾", 1", 1¼", 1½", 2" 2½" Flanged EN 192 PN4, PN63 PN1 Flanged SME 3 SME 6 Other available options: Butt weld Socket weld JIS / KS 3 JIS / KS 4 For alternative connections to those stated above please contact Spirax Sarco. Page 1 of 17
2 Materials Item numbers 1-21 Kvs values For conversion: Cv (UK) = Kv x.963 Cv (US) = Kv x Valve size DN15 DN2 DN25 DN32 DN4 DN5 DN65 Seat diameter (mm) Kvs values No.Part Material BBV4_ Carbon Steel 16, 17 1 Body BBV6_ BBV8_ Stainless Steel lloy Steel 2 Plug Stainless Steel 3 Seat Stainless Steel 4 Seat gasket Reinforced exfoliated graphite 5 Seat retainer Stainless Steel Cover BBV4_ BBV6_ BBV8_ Carbon Steel Stainless Steel lloy Steel 7 Packing BBV P PTFE BBV H Graphite 13 8 Cover gasket 9 Bonnet nutsbbv6_ 1 Bonnet studs Reinforced exfoliated graphite BBV H Stainless Steel Other Carbon Steel BBV H Stainless Steel BBV6_ Other Carbon Steel 6 9, ctuator clamp nut BBV6_ Other Stainless Steel Carbon Steel 7 12 Gl nut Stainless Steel 13 Scraper ring PTFE 14 Yoke SG Iron 1 15 Closed plate Stainless Steel 16 Hex. head screw Carbon Steel 17 Nut Carbon Steel 18 Upper housing Carbon Steel 19 Diaphragm Reinforced NBR Gasket Reinforced Graphite 21 Vent plug Brass DN15 BBV_3 PN / M shown Page 2 of 17
3 Materials Item numbers Kvs values For conversion: Cv (UK) = Kv x.963 Cv (US) = Kv x Valve size DN15 DN2 DN25 DN32 DN4 DN5 DN65 Seat diameter (mm) Kvs values No.Part Material 22 Bolt Carbon Steel 23 Diaphragm plate luminium 24 Spindle Stainless Steel 25 Lever stem Stainless Steel 26 Screw Carbon Steel 27 Seal Polyurethane 28 Spring Spring Steel 29 Spring guide Stainless Steel 3 Connector Stainless Steel 31 Lever SG Iron 32 xis Stainless Steel 33 Roller Stainless Steel 34 Spring graphite Spring Steel 35 Elastic ring Carbon Steel 36 Elastic ring Carbon Steel 37 Washer Carbon Steel 38 O'ring Viton 39 Spacer Carbon Steel 4 Washer Carbon Steel 41 Plastic protection Plastic 42 Screw Stainless Steel DN15 BBV_3 PN / M shown Page 3 of 17
4 Minimum air pressure / Differential pressure Differential pressure (ΔP) across the valve Minimum air pressure bar g DN15 - DN25 DN32 - DN5 DN65 1 bar g bar g bar g bar g bar g bar g bar g bar g bar g bar g bar g 3.6 Capacities Size DN15 DN2 DN25 DN32 DN4 DN5 DN65 Kv Pressure (bar) Capacity (m 3 /h) DN65 DN5 4 DN4 DN DN2 DN Pressure (bar) Page 4 of 17
5 BBV43 Pressure / temperature limits - EN 192 D C B D D C B n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. PN1 1 bar 5 C - B - B PN bar g Stard packing PTFE chevron (P) bar g bar g PN63 63 bar 5 C - C - C PN bar g Stard packing PTFE chevron (P) bar g bar g 94.5 bar g PN4 4 bar 5 C - D - D PN bar g Stard packing PTFE chevron (P) bar g bar g Minimum operating temperature -1 C 6 bar g Page 5 of 17
6 BBV43 Pressure / temperature limits - SME F E G Pressure psi g F E Temperature F n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C (+41 F), the external moving parts of the valve actuator must be heat traced to maintain normal operation. SME bar 38 C 148 psi 1 F - E - E SME 6 - F - F SME 3 - G SME bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F psi g SME bar 38 C 74 psi 1 F bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F 77 bar g psi g SME bar 38 C 284 psi 1 F bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F 77 bar g psi g Page 6 of 17
7 BBV43 Pressure / temperature limits - JIS / KS I I H H 6 68 n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. JIS / KS4 68 bar 12 C - H - H JIS / KS bar g Stard packing PTFE chevron (P) 25 6 bar g bar g JIS / KS3 51 bar 12 C - I - I JIS / KS bar g Stard packing PTFE chevron (P) bar g bar g Page 7 of 17
8 BBV63 Pressure / temperature limits - EN L K L J K J 1 n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. - J - J PN1 - K - K PN63 - L - L PN4 PN1 1 bar 1 C bar g Stard packing PTFE chevron (P) bar g bar g PN63 63 bar 1 C bar g Stard packing PTFE chevron (P) bar g bar g PN4 4 bar 1 C bar g Stard packing PTFE chevron (P) bar g bar g 6 bar g Page 8 of 17
9 BBV63 Pressure / temperature limits - SME N M Pressure psi g O N M Temperature F n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. - M - M SME 6 - N - N SME 3 - O SME 15 SME bar 38 C 1 44 psi 1 F bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F Design for a maximum cold hydraulic test pressure of: psi g SME bar 38 C 1 44 psi 1 F bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F 75 bar g 1 87 psi g SME bar 38 C 275 psi 1 F bar g 1 2 psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g 1 2 psi g -2 F 29 bar g psi g Page 9 of 17
10 BBV63 Pressure / temperature limits - JIS / KS Q Q P P 6 68 n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. JIS / KS 4 68 bar 12 C - P - P JIS / KS bar g Stard packing PTFE chevron (P) 25 6 bar g bar g JIS / KS 3 51 bar 12 C - Q - Q JIS / KS bar g Stard packing PTFE chevron (P) bar g bar g Page 1 of 17
11 BBV83 Pressure / temperature limits - EN S R S R 1 n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. PN1 1 bar 25 C - R - R PN bar g Stard packing PTFE chevron (P) 25 1 bar g bar g PN63 63 bar 25 C - S - S PN bar g Stard packing PTFE chevron (P) bar g 49 4,9 bar g Page 11 of 17
12 BBV83 Pressure / temperature limits - SME Pressure psi g T Temperature F n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C (+41 F), the external moving parts of the valve actuator must be heat traced to maintain normal operation. SME bar 38 C psi 1 F - T SME bar g psi g -2 F TMO Maximum operating temperature Stard packing PTFE chevron (P) bar g psi g bar g psi g -2 F psi g Page 12 of 17
13 BBV83 Pressure / temperature limits - JIS / KS V 51 6 U 68 n extended cover is required for use in this region. 1. Where the process fluid temperature is sub-zero the ambient temperature is below +5 C, the external moving parts of the valve actuator must be heat traced to maintain normal operation. JIS / KS 4 68 bar 12 C - U JIS / KS bar g Stard packing PTFE chevron (P) 25 6 bar g bar g JIS / KS 3 51 bar 12 C - V JIS / KS bar g Stard packing PTFE chevron (P) bar g 49 3 bar g Page 13 of 17
14 Dimensions / Weights (approximate) in mm kg Flanged EN 192 Size B C C1 PN4 PN63 PN4 PN63 PN4 PN63 PN4 PN63 PN1 PN1 PN1 PN1 D E F Weight DN DN DN DN DN DN DN Flanged SME Size SME 3 B C C1 SME SME SME SME SME SME SME 6 D E F Weight DN DN DN DN DN DN DN F D E C C1 DN15 BBV_3 PN / M shown B DN15 BBV_3 M shown Butt weld Socket weld Size B C C1 D E F Weight DN DN DN DN DN DN DN Page 14 of 17
15 Spare parts PN4 SME 15 SME 3 The spare parts available are shown in solid outline. Parts drawn in a grey line are not supplied as spares. Note: When placing an order for spare parts please specify clearly the full product description as found on the label of the valve body, as this will ensure that the correct spare parts are supplied. vailable spares - BBV series ctuator clamping nut C2 Gasket set (Non-bellows sealed) B, G PTFE to Graphite conversion kit C1 Stem seal kits Graphite packing C2 C1 Plug stem seat kit Fast opening trim (No gaskets supplied) D1, E How to order spares lways order spares by using the description given in the column headed 'vailable spares', state the size type of valve including the full product description of the product. Example: 1 - PTFE stem seal kit for a Spirax Sarco BBV43 PWSUSS DN25 PN4 control valve. How to fit spares Full fitting instructions are given in the Installation Maintenance Instructions supplied with the spare. D1 E G Page 15 of 17
16 Spare parts PN63 PN1 SME 6 JIS / KS 3 JIS / KS 4 The spare parts available are shown in solid outline. Parts drawn in broken line are not supplied as spares. Note: When placing an order for spare parts please specify clearly the full product description as found on the label of the valve body, as this will ensure that the correct spare parts are supplied. vailable spares BBV ctuator clamping nut Gasket set B, G Stem seal kits Graphite packing C1 C1 Plug stem seat kit Fast opening trim (No gaskets supplied) D1, E How to order spares lways order spares by using the description given in the column headed 'vailable spares', state the size type of valve including the full product description of the product. D1 Example: 1 - Plug stem seat kit for a Spirax Sarco BBV43 PWSUSS DN25 PN63 two-port control valve having flanged PN63 connections. How to fit spares Full fitting instructions are given in the Installation Maintenance Instructions supplied with the spare. B D1 H G E Page 16 of 17
17 BBV selection guide: Valve series BBV = Boiler blowdown valve BBV 4 = Carbon steel Body material 6 = Stainless steel 4 8 = lloy steel Connections 1 = Screwed 3 = Flanged 3 Stem sealing P = PTFE H = Graphite P Seating W = Stellite W Type of trim S = Stard trim S Trim balancing U = Unbalanced U Bonnet type S = Stard S Bolting S = Stard S Valve size = DN15, DN2, DN25, DN32, DN4, DN5 DN65 ½", ¾", 1", 1¼", 1½", 2" 2½" DN2 Connections For alternative connections to those stated please contact Spirax Sarco. EN stard = Flanged EN 192 PN4, PN63 PN1 SME = Flanged SME 3 SME 6 stard Butt weld Socket weld PN4 Version PN / M = ir / water pneumatically actuated supplied with a manual actuation lever M = Manually actuated complete with a manual actuation lever PN / M Selection example: BBV 4 3 P W S U S S DN2 PN4 PN / M How to order example: 1 off Spirax Sarco BBV43PWSUSS DN2 PN / M Page 17 of 17
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationFT47 SG Iron Ball Float Steam Traps (DN15 to DN50)
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationABV21i and ABV40i Air Actuated Boiler Blowdown Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationM21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationBalanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFig B34 Carbon Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Page 1 of 7 TI-P107-01 CH Issue 10 Cert. No. LRQ 0963008 ISO 9001 Pilot Operated Pressure Reducing Valves with Stainless Steel odies Description The pilot operated pressure reducing valves have been manufactured
More informationM10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBBV Automatic or Manually Actuated Boiler Blowdown Valves Installation and Maintenance Instructions DN15 - DN65
4057050 / 1 IM-P405-54 AB Issue 1 BBV Automatic or Manually Actuated Boiler Blowdown Valves Installation and Maintenance Instructions DN15 - DN65 PN / M automatically actuated 1. Safety information 2.
More informationM10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationPN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves
Description The PN9000 series actuators are a compact range of linear actuators that are available in 3 diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSTERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM80i ISO Stainless Steel Ball Valve for Sanitary Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More informationMSC-125 and MSC-160 Manifolds for Steam Distribution and Condensate Collection.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
TI-P006-01 CH Issue 8 DP143, DP143G and DP143H ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The DP143, DP143G and DP143H pilot operated pressure
More informationDP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
Page 1 of 7 TI-P006-01 CH Issue 11 ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The pilot operated pressure reducing valves have been manufactured
More informationS and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationDP163, DP163G and DP163Y Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPilot Operated Pressure Surplussing Valve with Cast Steel Body
Page 1 of 7 TI-P004-01 CH Issue 6 SDP143 ISO 9001 Pilot Operated Pressure Surplussing Valve with Cast Steel Body Cert. No. LRQ 0963008 Description The SDP143 is a cast steel pilot operated pressure surplussing
More informationDP27, DP27E, DP27G, DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron Bodies
Page 1 of 9 TI-P470-01 H Issue 4 DP27, DP27, DP27G, ISO 9001 DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron odies ert. No. LRQ 0963008 Description The pilot operated pressure reducing
More information3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
More informationMSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions
1170650/3 IM-P117-17 ST Issue 3 MSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1 General safety information 2 General product information
More informationDRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
More information½" to 4" (DN15 to DN100) LEA31 and LEA33 ANSI Control Valves Installation and Maintenance Instructions
00050/1 IM-P0-02 CH Issue 1 ½" to " (DN15 to DN100) LEA1 and LEA ANSI Control Valves Installation and Maintenance Instructions 1. Safety 2. Technical details. Installation and commissioning. Maintenance
More informationDCV1, DCV2 and DCV3 Disc Check Valves Installation and Maintenance Instructions
1340050/5 IM-P134-07 ST Issue 5 DCV1, DCV2 and DCV3 Disc Check Valves Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning
More informationPN9400 Series. Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves
Page 1 of 5 TI-P328-01 CH Issue 1 PN9400 Series ISO 9001 Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Cert. No. LRQ 0963008 Description The PN9400 series actuators are a compact range
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationSDP143 Pilot Operated Pressure Surplussing Valve with Cast Steel Body
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationGlobe Control Valves
Globe Control Valves GLOBE CONTROL VALVES The modular, flexible option ABOUT GLOBE CONTROL VALVES The SPIRA-TROL and M-Series Globe Control valves are general purpose control valves that can be engineered
More information3-port valves. pneumatically actuated
3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive
More informationSVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTwo port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
More informationDRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSpiratec ST14, ST16 and ST17 Sensor Chambers and Sensors
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves
Description The TN2000 series pneumatic piston actuators are designed for use with 6" and 8" SPIRA-TROL control valves. There are three versions available: Single-acting (with spring), Double-acting (with
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationSCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationADCATROL INTERMITTENT BLOWDOWN VALVES VPA 26 (Fabricated steel)
TROL INTERMITTENT BLOWDOWN VLVES VP 26 (Fabricated steel) DESCRIPTION The VP26 blowdown valve was specially designed for application on steam boilers removing the concentrations of solids avoiding boiler
More informationTypes PN5000 and PN6000 Series Pneumatic Actuators Installation and Maintenance Instructions
3570050/6 IM-P357-04 CH Issue 6 Types PN5000 and PN6000 Series Pneumatic Actuators Installation and Maintenance Instructions 1. General 2. Installation 3. Commissioning 4. Reversal of Actuator Action PN5000
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationPN9000 Series Pneumatic Actuators Installation and Maintenance Instructions
3579049/14 IM-P357-29 CTLS Issue 14 PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions PN9100 PN9200 1. Safety information 2. General product information PN9300 3. Installation
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationPressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
More information'C' Series Control Valves
3060050/3 IM-F12-31 CH Issue 3 'C' Series Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and Commissioning 4. Maintenance
More informationBVA300 Series Pneumatic Actuators for use with Spirax Sarco Ball Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
More informationSPIRA-TROL Two-port Control Valves EN Standard JE, JF and JL DN15 to DN200 and ASME Standard JEA, JFA and JLA ½" to 8"
3750100/1 IM-S24-61 CH Issue 1 SPIRA-TROL Two-port Control Valves EN Standard JE, JF and JL DN15 to DN200 and ASME Standard JEA, JFA and JLA ½" to 8" Installation and Maintenance Instructions 1. Safety
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationThe GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
More informationVanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationQLM and QLD Series DN125 to DN200 Three Port Control Valves
3.63.27.22 3900/1 IM-P39-1 CH Issue 1 QLM and QLD Series DN12 to DN200 Three Port Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
More informationWhat's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationSeries 240 Pneumatic Control Valve Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valve Type 3244-1 Type 3244-7 Three-way Valve Type 3244 with long insulating section circulation inhibitor ANSI version Application Mixing or flow-diverting valve for cryogenic
More informationGachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
More informationPNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationQLM and QLD Series DN15 to DN100 Three Port Control Valves
3.563.575.01 3590050/3 IM-P359-01 CH Issue 3 QLM and QLD Series DN15 to DN100 Three Port Control Valves Installation and Maintenance Instructions 1. Safety information. General product information 3. Installation
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationARI-STEVI BBD 415 (DN25-50) Straight through blow down valve
With pneumatic actuator ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve ARI-STEVI BBD 415 Pneumatic actuator Required air supply pressure max. 6 bar Options: - Assembly of additional devices
More informationRS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
More informationExcess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationSpring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationType. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
More informationBALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More information