HARCO DUCTILE IRON IPS GASKETED FITTINGS DESIGN DATA
|
|
- Oswald Parker
- 6 years ago
- Views:
Transcription
1 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT pplicable Standards Ductile Iron: STM 536 Grade , Joints: STM D-3139; WW C153 Gaskets: SR Standard, EPDM & Nitrile vailable STM F-477 Pressure Rating: 350 psi per WW C153 Coatings: ituminous WW C153, Standard Cement ining WW C153 Coal Tar Epoxy WW C210 Fusion ond Epoxy WW C116 - REPIR COUPING (Knock-On, continued) SIZE PRT No. WT. (approx.) MJ MJ MJ TEE (GxGxG) E SPECIFICTIONS Spigot O.D. C D ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS C D STYE STYE STYE C SIZE C D Spigot O.D. STYE 1½ ½ C C REPIR COUPING (Knock-On) SIZE PRT No. WT. (approx.) 1½ ½ C D SIZE PRT No. WT. (approx.) 1½ x 1½ x 1½ x 2 x x 2 x 2½ x 2 x ½ x 2½ x ½ x 2½ x 2½ ½ x 2½ x x 2½ x 2½ x 3 x x 3 x 2½ x 3 x x 4 x x 4 x 2½ x 4 x x 4 x x 6 x x 6 x 2½ x 6 x x 6 x x 6 x x 8 x x 8 x x 8 x x 8 x x 10 x x 10 x x 10 x x 10 x x 12 x x 12 x x 12 x x 14 x x 16 x x 18 x MJ FROM SIGM THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-1
2 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT REDUCER S.E.. (Small End ell) REDUCERS - (ell x ell) SIZE PRT No. WT. (approx.) 2½ x x x 2½ x x 2½ x x x x x x x x x x x x x x x x x x x MJ x MJ x MJ 170 STYE STYE SIZE PRT No. STYE WT. (approx.) 2 x 1½ ½ x 1½ x x 2½ x x 2½ x x x 2½ x x x 2½ x x x x x x x x x x x x x CONNECTING INKS ND EYE OTS REDUCER.E.. SIZE PRT No. WT. (approx.) 3 x ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/ SIZE PRT No. WT. (approx.) SM INK (1½ -8 ) TRNSITION INK (10-12) HEVY DUTY INK (10-12) /8 x 3 OT /8 x 12 OT /4 x 3 OT /4 x 4 OT
3 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT CROSSOVER RING 90 END (GxG) (1/4 end) R SIZE PRT No. WT. (approx.) CROSS (ll Gasketed) SIZE PRT No. R WT. (approx.) 1½ ½ v END (GxG) (1/8 end) SIZE PRT No. WT. (approx.) 2½ x 2½ x 1½ x 1½ ½ x 2½ x 2 x x 3 x 2 x x 3 x 2½ x 2½ x 4 x 2 x x 4 x 2½ x 2½ x 4 x 3 x x 6 x 2 x x 6 x 2½ x 2½ x 6 x 3 x x 8 x 2 x x 8 x 2½ x 2½ x 8 x 3 x x 10 x 2 x x 10 x 2½ x 2½ x 10 x 3 x x 12 x 2 x x 12 x 2½ x 2½ x 12 x 3 x SIZE PRT No. R WT. (approx.) 1½ ½ R ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-3
4 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT 22 1/2 END (GxG) (1/16 end) TPPED TEES (Service Tees) SIZE PRT No. R WT. (approx.) 2½ /4 END (GxG) (1/32 end) R STYE SIZE PRT No. STYE WT. (approx.) 1 x x ½ x x x x x x x x x TPPED CROSS SIZE PRT No. R WT. (approx.) R SIZE PRT No. WT. (approx.) 2½ x 2½ x 1 x ½ x 2½ x 1½ x 1½ ½ x 2½ x 2 x x 3 x 3 x x 4 x 3 x x 6 x 3 x x 8 x 3 x x 10 x 3 x x 12 x 3 x CME SERVICE TEES ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS STYE STYE SIZE PRT No. STYE WT. (approx.) 2 x THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-4
5 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT CME SERVICE TEES (continued) SIZE PRT No. STYE WT. (approx.) 2 x 1¼ x 1½ ½ x ½ x 1¼ ½ x 1½ x x 1¼ x 1½ x x 1¼ x 1½ x x 1¼ x 1½ x x 1¼ x 1½ SIDE OUTET TPPED CP TPPED PUG (Female NPT) SIZE PRT No. MX TP WT. (approx.) / ½ / CP STYE STYE STYE STYE SIZE PRT No. STYE WT. (approx.) 2 x 1½ ½ x 1½ PUG SIZE PRT No. STYE WT. (approx.) 1½ ½ MJ TPPED CP SIZE PRT No. WT. (approx.) ½ ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/ SIZE PRT No. WT. (approx.) xx ½ 80267xx xx xx xx xx xx xx
6 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT DPTER (MIPT x Female CME) SPIGOT X FNGE (continued) SIZE PRT No. WT. (approx.) SIZE PRT No. WT. (approx.) 2 x x 1¼ x 1½ ME DPTER (ell x MIPT) FNGE X E DPTER SIZE PRT No. WT. (approx.) 1½ x 1½ x 1½ x ½ x ½ x 2½ x x FNGE SPECS SIZE No. HOES DIMETER OTS OT CIRCE 3 4 5/ /8 7-1/ /4 9-1/ /4 11-3/ /8 14-1/ /8 17 SPIGOT X FNGE STYE STYE SIZE PRT No. STYE WT. (approx.) 3 x F x x F x x F x x F x x F x x F x x x MJ 240 FNGE X OUTET TEE ` SIZE PRT No. WT. (approx.) ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS SIZE PRT No. WT. (approx.) 3 x F x F x F x F x F x F x F x F THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-6
7 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT FNGE X OUTET TEE (continued) SIZE PRT No. WT. (approx.) 10 x F x F x F x F NPT SDDE SDDE (GSKETED) SIZE PRT No. WT. (approx.) x x x x x x SIZE PRT No. WT. (approx.) 3 x x x x x x SWIVE SDDE SWIVE TEE SIZE PRT No. WT. (approx.) ½ SIZE PRT No. WT. (approx.) TER 90 MIPT X MSW SIZE PRT No. WT. (approx.) 1½ x x x ½ x x ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-7
8 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT TER 90 FIPT X MSW TER NIPPE SPIGOT X MSW SIZE PRT No. WT. (approx.) 1½ x ½ x x x ½ x x SIZE PRT No. WT. (approx.) 2 x x x TER 90 MSW X E TER 90 SPIGOT X MSW SIZE PRT No. WT. (approx.) 2 x x ½ x x SIZE PRT No. WT. (approx.) 2 x ½ x x DPTER FEME X SW TER NIPPE MIPT X MSW SIZE PRT No. WT. (approx.) 1½ ½ SIZE PRT No. WT. (approx.) 2 x x x x ½ x x SPIGOT X THRED DPTER ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS SIZE PRT No. WT. (approx.) 2 x 1½ x x 2½ THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-8
9 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT DPTER FSW X MIPT DI NIPPES OD SIZE PRT No. WT. (approx.) 1½ ½ SWIVE EXTENSION (MSW x FSW) SIZE PRT No. OD WT. (approx.) ¼ ½ ½ KNUCKE RESTRINT SIZE PRT No. WT. (approx.) TER 90 MIPT X MIPT SIZE PRT No. WT. (approx.) 1½ ½ SIZE PRT No. WT. (approx.) 1½ ½ T 90 FNPT X MNPT SIZE PRT No. WT. (approx.) 1½ ½ ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/2003-9
10 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT FITTING TO PIPE RESTRINT WYE WT. (approx.) - SIZE PRT No. Max Tap WT. (approx.) 1½ / VVE TO FITTING RESTRINT WT. (approx.) - SIZE PRT No. WT. (approx.)- WT. (approx.) SIZE PRT No. WT. (approx.) VVE TO PIPE RESTRINT SIZE PRT No. WT. (approx.) ½ ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/
11 HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT PIPE TO PIPE RESTRINT SIZE PRT No. WT. (approx.) ½ xx xx FITTING TO VVE TO PIPE RESTRINT SIZE PRT No. WT. (approx.) ½ ll lay lengths & weights are approximate and are subject to change without C FOR OTHER SIZES, CONFIGURTIONS & GSKET MTERIS THE HRRINGTON CORPORTION P.O. OX YNCHURG VIRGINI PNT 3721 COHEN PCE YNCHURG VIRGINI PHONE: (434) FX: (434) sales@harcofittings.com Form XXX 12/03/
HARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D-2321
More informationHARCO PVC C-900 GASKETED FITTINGS DESIGN DATA
HRO PV -900 GSKETED FITTINGS DESIGN DT E SPEIFITIONS REPIR OUPING SPIGOT O.D. SIZE STYE Spigot O.D. 4 M 4.3 3.1 6.3 4.80 6 M 4.8 3.5 8.6 6.90 8 M 5.4 4.0 11.0 9.05 10 F 9.0 5.0 13.0 11.10 12 F 9.5 5.5
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D-2321
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Installation: STM D-2321 45 WYE (G x G x G) E SPEIFITION
More informationAWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More information2" - 64" DUCTILE IRON MECHANICAL JOINT COMPACT FITTINGS
GENER SPECIFICIONS MERI: Ductile Iron per SM 536 PRESSURE: ESING: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes In accordance with NSI/WW
More informationAWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationSeries PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
More informationCerta-Lok YelomineTM
CertainTeed Certa-ok YelomineTM CertainTeed s Certa-ok Yelomine Restrained Joint PVC Pressure Pipe meets the performance requirements of ASTM D2241 Standard Specification for Poly (Vinyl Chloride) (PVC),
More informationPRESS FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
PRESS FITTINGS FOR PUMBING ND MECHNIC PPICTIONS JOB NME JOB OCTION ENGINEER CONTRCTOR WHOESER STREMINE PRS TM REP PRODUCT DESCRIPTION: Streamline PRS TM mechanical press copper fittings for use in plumbing
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationCerta-Lok Yelomine. C ertainteed. Specifications & Dimensions. General information. Joint Assembly. Restrained Joint PVC Pressure Piping System
C ertainteed Certa-ok Yelomine Specifications & Dimensions Restrained Joint PVC Pressure Piping System CertainTeed s Certa-ok Yelomine Restrained Joint PVC Pressure Pipe meets the performance requirements
More informationSeries 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationPRESS FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
PRESS FITTINGS FOR PUMBING ND MECHNIC PPICTIONS JOB NME JOB OCTION ENGINEER CONTRCTOR WHOESER STREMINE PRS TM REP PRODUCT DESCRIPTION: Streamline PRS TM mechanical press copper fittings for use in plumbing
More informationDuctile and Cast Iron Flanged Fittings Metalfit
Ductile and Cast Iron Flanged Fittings 2 48 Metalfit Flanged oint Dimensions NSI/WW C110/21.10 BC OD Size OD BC ole Dia. Bolt Size No. Bolts 2 6.00 4.75 0.62 0.75 5/8 x 2-1/4 4 2-1/2 7.00 5.50 0.69 0.75
More informationNOTE: These valves can be identified by rounded screw flanges on the sides of the body.
SURGEON SRUB-UP VVES 4T _ Series Floor and Wallmount Foot Pedal Valves (Pre-1) WMOUNT 1 2 FOORMOUNT NOTE: These valves can be identified by rounded screw flanges on the sides of the body. 4 PEDEST MOUNT
More informationSURGEON SCRUB-UP VALVES
62 SURGEON SRUB-UP VVES 54T6 _ Series Knee ction Valve (Pre-1993) DEK/W SPOUTS See Page 63 * For Package Quantities check the parts section of the latest Delta ommercial Faucet Price ist ITEM # PRT # DESRIPTION
More informationM J G O.D. B.C. A B I.D. C O.D. A B C I.D. B.C.
DI S TR Utility Pipe ittings and ccessories MJ ccessories NSI/WW 111/21.11 GLNDS, GSKETS, OLTS & NUTS GENERL SPEIITION MTERIL: PRESSURE: TESTING: DIMENSIONS: WEIGHTS: OTING: Ductile Iron per STM 536 350
More informationWhen the cylinder. is fully charged and air is no longer flowing from inlet to cylinder port, the outer lip of the. diaphragm will assume
QUICK EXHUST VVES 125 PSIG 1/8" to 3/4" Instantaneous dumping of exhaust air permits use of smaller air valves and piping. Increases system efficiency and cycling speeds. The Quick Exhaust Valves provide
More informationMACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
More informationNORTH AMERICAN PIPE CORPORATION. Specifications & Dimensions. Restrained Joint PVC Pressure Piping System
NORTH AMERICAN PIPE CORPORATION Certa-ok Yelomine Restrained Joint PVC Pressure Piping System GENERA INFORMATION North American Pipe Corporation s Certa-ok Yelomine Restrained Joint PVC Pressure Pipe meets
More informationCOOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
More informationNEW STYLE - TANK ADAPTER Socket x Socket Dimensions Also Applicable to 8170E-XXX & 8170V-XXX
Tank Adapters (Bulkhead Fittings) Designed to facilitate connections through tank or bulkhead walls. Available in PVC or CPVC with socket x socket, Socket x thread or S thread, thread x thread or thread
More informationPE-5000 DUCT STATIC PRESSURE SENSING ELEMENT
Technical Data Sheet PE-5000 DUCT STTIC PRESSURE SENSING ELEMENT DESCRIPTION Model PE-5000 units are insertion-type primary duct pressure sensing elements designed to achieve pressure signal accuracy and
More informationUSA, INC. At the date of 30/04/2009: Lead free law passed. Law suggested
US, IC. US, IC. t the date of 30/04/2009: ead free law passed aw suggested CCORDIG CIFORI HET SFETY CODE 116875 VIE FROM SEPTEMER 2009 SERIES 171 F COMMERCI STYE rass ball valve, female/female, full port
More informationBACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
More informationKnife Gate & Butterfly Valves Data Sheets
Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net
More informationEverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
More informationTYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationAccording to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationFIBER GLASS SYSTEMS UL/ULC Listed Red Thread IIA Piping
ulletin No. 2101 October 1, 2007 FIER GLSS SYSTEMS UL/ULC Listed Red Thread II Piping Time-Tested Fiberglass Primary Piping and Secondary Containment Piping for Underground Fuel Installations UL/ULC Listed
More informationTurf & Irrigation EverTUFF TURF Swing Joint Riser Assemblies
Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 88 Due to Material Cost Variations, s Subject to Change. Check On-line Catalog @ www.spearsmfg.com Most common configurations of Swing
More informationSpears Low-Extractable SCHEDULE 80 PIPE
Spears Low-Extractable SCHEDULE 80 PIPE NOMINAL PIPE MAX. W.P. LGTHS/ PART NUMBER AVG. OD AVG. ID MIN. WALL LBS/FT SIZE PSI* CARTONS 1/2" LXT-005.840.528.147 420.202 22 3/4" LXT-007 1.050.724.154 340.273
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationSchedule 40 Fittings & Accessories Turf Swivel Joints
Turf Swivel Joints Turf Swivel Joints, Compact Turf Swivel Joints and Turf Swivel Joint Kits are designed for open discharge systems and are not to be used with valve-in-head sprinklers or quick coupler
More informationStarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
More informationFE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
More informationLab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
More informationPrice List Import Restraints
LP2016-NR Effective: February 1, 2016 Supersedes All Previous Pricing Import Restraints For Other Products See: LP2015-ND - Import Utility Fittings, Glands, Accessory Packs LP2015-D - Domestic Utility
More informationCACTUS FLOW PRODUCTS
ADJUSTABLE CHOKES POSITIVE CHOKES CACTUS FLOW PRODUCTS s Adjustable Choke assemblies and Long Nose Heater Choke assemblies are furnished with Hardened Alloy Steel Stems and Seats as Standard Trim for Regular
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
More informationUtilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
More informationPipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
More informationAWWA, RESILIENT WEDGE GATE VALVES
Type AVK Ref. # Size Weight kg lb US $ Series 04 Wrench nut Ductile Iron Series 08 Handwheel for AVK gate valves series 45, 55, 65 and 66 With bolt and washer Grey cast iron Size 1"-30" Series 18/45/55/65/66
More informationF L A C110 FLANGED FITTINGS CAST IRON & DUCTILE IRON 2007 Sigma Corporation, All Rights Reserved
F L A C110 & N GE D 2-54 / BASIC SPECIFICATIONS www.sigmaco.com / MATERIAL: Cast Iron: ASTM A48, Grade 25B (2-14 ) / Grade 30B (16-54 ) Ductile Iron ASTM A536 PRESSURE: 250 PSI Water Working Pressure for
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2019
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 81.15 244066 3 X 3.5 23 60
More informationVALVE INSERTION WHEN YOU ARE UNDER PRESSURE TO INSTALL A VALVE IN AN OPERATING LINE VALVE INSERTION PAGE QV-2
www.romac.com 1-800-426-9341 WHEN YOU RE UNDER PRESSURE TO INSTLL VLVE IN N OPERTING LINE PGE QV-2 4", 6" or 8" installations in cast iron, ductile iron, /C and some classes of PVC pipe Uses modern resilient
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2018
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 74.25 244066 3 X 3.5 23 60
More informationPVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS
HRRISON MCHINE & PLSTIC CORPORTION PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS For Harrison Fume Exhaust Systems Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationSchedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Check Valves
Schedule 0 Industrial Products & Accessories True Union 000 Industrial Ball Check Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - " 50 psi All Flanged 50 psi = 0 F (0 C) Rated for Vacuum Service
More informationSincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
More informationStyle Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
More informationCPVC DUCT PIPE & FITTINGS
CPVC DUCT PIPE & FITTINGS For Harrison Fume Exhaust Systems HRRISON MCHINE & PLSTIC CORPORTION Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH Table of Contents
More informationTechnical Description Can be used in hydraulic systems
Swivel Joints Swivel Joints G-Series Technical escription Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. epending on design,
More informationYSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
More informationSuper Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationNominal Size Average O.D. Average I.D. Inches (mm) Inches (mm) Inches (mm)
The information contained in this section is based on current information and Product design at the time of publication and is subject to change without notification. Our ongoing commitment to product
More informationButterfly Valves. Applications. Pressures To 200 PSIG Temperatures to 300 F BUTTERFLY VALVES FEATURES MATERIALS OF CONSTRUCTION SEAT MATERIALS
pplications Process Industry Pulp and Paper Power Industry Metals and Mining Chemical Industry Water and Waste Oil and Gas utterfly Valves Pressures To 200 PSIG Temperatures to 300 F FETURES Positive Shutoff
More informationRigid/Swivel Optional Spouts
Rigid/Swivel Optional Spouts SPECIFYING PROCEDURE FOR OPTION RIGID/SWIVE SPOUTS: 1. Select BSE PRODUCT with Standard Gooseneck Spout, and with spout outlet and handles required. 2. Select Optional Rigid/Swivel
More informationCLAMP-ON SADDLES Simple Two-Piece Design Engineered for Reliability
CAP-O SADDES Simple Two-Piece Design Engineered for Reliability Spears PVC Clamp-On Saddles allow quick, easy and reliable addition of branch lines to existing piping system lines. These versatile saddle
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationHOLDERS. Straight Heavy-Duty Ejector Holders - Swivel head. FIGURE 6-1 (Material RWMA Class 2)
SEEDORFF ME orp. 866-RES-WELD (737-9353) Straight Heavy-Duty Ejector Holders - Swivel head 3 6 7 9 10 11 12 13 1 2 4 5 8 FIGURE 6-1 (Material RWM lass 2) THE ENTERLINE HEVY DUTY EJETOR HOLDER HS EEN DESIGNED
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. Water pressure reducing valves PR (36LF) Series Residential and commercial applications The Apollo 36LF pressure
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. WATER PRESSURE REDUCING VALVES PR (36LF) SERIES RESIDENTIAL AND COMMERCIAL APPLICATIONS The Apollo 36LF pressure
More informationBrass Full Port Ball Valve IPS 600 WOG 150 SWP
Brass Full Port Ball Valve IPS 600 WOG 150 SWP Material of Valve s Body Cast Brass Ball...Chrome Plated Brass Stem Packing.Teflon Stem.Brass Stem Gland Screw.Brass Handle.Zinc Plated Steel IPS BLL VLVE
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationCLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
More informationFIBERGLASS DAMPERS FOR ODOR CONTROL AND CORROSIVE HVAC SYSTEMS
FIERGLSS S FOR ODOR CONTROL ND CORROSIVE HVC SYSTEMS ELCO FIERGLSS S ELCO Fiberglass Dampers are manufactured to meet the needs of the odor control and corrosive HVC industries by providing a corrosion-resistant
More informationCerta-Set Main Line Piping System
Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationRANGER COUPLINGS RANGER COUPLINGS
RANGER COUPINGS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. ecause of the
More informationHAMMER UNIONS AND SWIVEL JOINTS. Sara Sae
HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC
More informationBoring Instructions for Steel Hubs
Couplings teel Hub Boring, Keyseting, etscrews & Puller Holes All Types (Pge 1 of 8) Figure 1 Figure 2 Figure 5 Boring Instructions for teel Hubs Refer to the pproprite selection guide for coupling hub
More informationAGD AND AGD4A SERIES
Job Name: Job Location: Engineer: Tag: AGD AND AGD4A SERIES DESCRIPTION The Apollo Air Gap Drain (AGD) is designed to funnel minor discharges from a Reduced Pressure Backflow Preventer s relief valve due
More informationPrice List Effective March 19, 2012
Georg Fischer Harvel LLC 300 Kuebler Road Easton, PA 18040 USA Phone: (610) 252-7355 Fax: (610) 253-4436 harvel.gfh.ps@georgfischer.com www.harvel.com PRICES SUBJECT TO CHANGE WITHOUT NOTICE PRICE SHEET
More informationRED THREAD IIA PIPING SYSTEMS
RED THRED II PIPING SYSTEMS One Company Unlimited Solutions NOV Fiber Glass Systems is the combination of the Star Fiberglass product line and the Smith Fibercast product lines bringing over 60 years of
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationGeorg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint
Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of
More informationSmith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationTYLER UNION IMPORT RESTRAINTS LP NR
SERIES 1000 MJ TUFGRIP WEDGE TYPE RESTRAINT FOR DUCTILE IRON PIPE MJ TUFGRIP for DI Pipe - GLAND ONLY N70-5760 MJ TUFGRIP for DI Pipe - W/ ACCESSORIES N71-6795 3 113805 $42.94 7 150 3 114352 $65.05 10
More informationCHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US
More information