Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A

Transcription

1 Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable huntvalveactuators.com

2 Victory -Series ctuators uilt or Performance nd Versatility Little things can make a big difference to the performance and versatility of electromechanical actuators. Hunt Valve s extensive design and engineering experience makes all the difference for Victory -Series ctuators. ecause requirements differ, Victory -Series ctuators are designed to be configured to meet the specific application. ontact Hunt Valve to learn more about customized solutions that can suit any application and budget. # eature User enefits 1 Multiple screw options all screw, roller screw or M screw options to suit load, speed, and duty cycle requirements 2 Internal anti-rotation feature Prevents rod from rotating as it translates and provides lateral support of the rod Long guide bearing Provides smooth extension and retraction of the rod and long-life performance 4 Wiper / seal Protects against the ingress of liquids and particles 5 Multiple rod-end attachments Standard ISO rod-end attachments are available for affordable connection to the load 6 orrosion-resistant inner ram hrome-plated rod for standard units, stainless steel rod for food grade units 7 Screw support bushing liminates whipping and vibration of the screw, increasing dynamic performance and reducing noise 8 Over-travel protection bumpers Protects the internal components from over-travel mishaps 9 ngular contact bearings High-capacity bearing arrangement ensures long-life and thrust capacity 10 High-strength timing belt Provides long-life, backlash-free transmission on parallel motor mount options 11 Multiple mounting options or both pivoting and rigidly mounted applications (rear clevis shown) 12 Parallel motor mounting Reduces overall length; allows for rear clevis mounting; three standard timing belt ratios available 1 Stainless steel primary rod-ends Male thread and female thread rod-ends are stainless steel on all Victory -Series models and versions 14 Rod-end mounted lube port Simplifies maintenance by allowing the installed unit to be re-lubricated at any stroke position 15 xtruded aluminum cylinder body Provides for many product features while helping to reduce system weight 16 djustable position sensors or over-travel protection and position; dual T-slots allow for positioning along entire stroke of the unit 17 Inline motor mounting Provides for direct drive through the provided coupling 18 Motor adaption flexibility llows the use of any reasonably sized motor ttribute Units Model V26 Model V2 Model V4 Model V55 Max orce kn [lb-f] 6.2 [1400] 12.8 [2890] 17. [890] 52.7 [11865] Max Speed m/sec [in/sec] 2.01 [79.2] 0.86 [4.1] 1.27 [50] 1.58 [62.5] Max Stroke mm [inches] 610 [24.0] 762 [0.0] 1524 [60.0] 1524 [60.0] Performance of specific configurations is dependent on many factors, including stroke length and options. Please review this brochure thoroughly. 225 Glade View rive, Roanoke, V US (540) info@huntvalveactuators.com huntvalveactuators.com

3 Victory -Series Specifications 1 Model Screw Lead mm [inch] fficiency Max orce 2 kn [lb-f] Max Speed 2 m/s [in/sec] Max Stroke mm [inch] Rated Load, L 10 =10M inches,4 kn [lb-f] Rated Load, L 10 =2500km,4 all Screw Models V [0.20] 90% 6.2 [1400] 0.40 [15.8] 610 [24.0].4 [766] 1.6 [57] V [0.50] 90% 4.2 [960] 1.00 [9.6] 610 [24.0] 2.0 [446] 0.9 [208] V [1.00] 90% 2.7 [620] 2.01 [79.2] 610 [24.0] 1. [288] 0.6 [14] V [0.20] 90% 8.4 [1900] 0. [1.] 762 [0.0].9 [882] 1.8 [411] V [0.50] 90% 12.8 [2890] 0.84 [.] 762 [0.0] 7.0 [1578]. [76] V [0.25] 90% 17. [890] 0.1 [12.5] 1524 [60.0] 9.0 [200] 4.2 [947] V [0.50] 90% 17. [890] 0.6 [25.0] 1524 [60.0] 8.8 [197] 4.1 [920] V [1.00] 90% 10.2 [200] 1.27 [50.0] 1524 [60.0] 4.7 [1068] 2.2 [498] V [0.25] 90% 28.4 [6400] 0.21 [8.] 1524 [60.0] 1.2 [2971] 6.2 [186] V [0.50] 90% 52.7 [11865] 0.42 [16.7] 1524 [60.0] 26.6 [5988] 12.4 [2794] V [1.00] 90% 5.5 [8000] 0.84 [.] 1524 [60.0] 16.5 [71] 7.7 [17] V [1.875] 90% 2.2 [5215] 1.58 [62.5] 1524 [60.0] 15.2 [412] 7.1 [1592] Roller Screw Models V26-R05M 5.0 [0.197] 89% 4. [958] 0.45 [18.0] 610 [24.0] 7.0 [1576] 5. [75] V26-R10M 10.0 [0.94] 90%.8 [86] 0.91 [6.1] 610 [24.0] 8.8 [1986] [927] V2-R05M 5.0 [0.197] 88% 9.2 [2086] 0.4 [17.1] 762 [0.0] 1.5 [005] [1402] V2-R10M 10.0 [0.94] 90% 8.8 [1968] 0.86 [4.1] 762 [0.0] 17.0 [811] [1778] V4-R05M 5.0 [0.197] 87% 16.5 [698] 0.41 [16.1] 1524 [60.0] 16.5 [70] [1728] V4-R10M 10.0 [0.94] 89% 16.2 [651] 0.81 [2.2] 1524 [60.0] 21.0 [472] [220] V55-R05M 5.0 [0.197] 85% 4.0 [9672] 0.5 [1.8] 1524 [60.0] 26.2 [5888] 12.2 [2747] V55-R10M 10.0 [0.94] 88% 44.9 [10099] 0.70 [27.6] 1524 [60.0].4 [7514] 15.6 [506] M Screw Models V [0.20] 49% 6.2 [1400] 0.15 [6.1] 610 [24.0] N/ N/ V [0.20] 40% 12.4 [2800] 0.1 [5.1] 762 [0.0] N/ N/ V [0.25] 8% 16.9 [800] 0.12 [4.8] 1524 [60.0] N/ N/ V [0.25] 0% 41.7 [975] 0.08 [.2] 1524 [60.0] N/ N/ 1 These values are based on standard ranges of Victory -Series ctuators. ontact Hunt Valve for customized solutions that go beyond these specifications. 2 Max forces and speeds may be limited by the stroke of the actuator; check the application details against the olumn Loading and ritical Speed graphs on page 4. L 10 calculations are a statistical estimation of performance life at a given average dynamic load. e sure to consider acceleration forces as well as basic thrust requirements in the determination of average dynamic load. 4 The statistical wear life of lead (M) screws are difficult to predict due to surface finishes, lubrication, operating temperature, and environmental consideration. 5 It is not recommended that the Max orce rating be exceeded. Standard G1 G2 ody Materials 606-T6, 6061-T6 luminum 00 Series Stainless ody inish nodized ood Grade poxy Paint 00 Series Stainless Inner Ram (Thrust Rod) Plated Steel 00 Series Stainless Wiper/Seal Urethane ood Grade Urethane Key ttributes cceleration: To 9.8 m/s 2 [1G] Operating Temp: -0 to 70 [-22 to 158 ] Ingress Protection: IP67 Thrust earings: ngular ontact earings oupling Type: lastomer Jaw Type Timing elts/pulleys: T-Style, Reinforced Polyurethane ctuator performance limits are dependent on product options, configurations, stroke length, etc.; therefore they might be less than the maximum values shown above. Please consult Hunt Valve with application details for proper sizing and selection.

4 Victory -Series ctuators ngineering ata or Sizing olumn Loading Graphs Thrust, kn [lbf] 1.4 [000] 8.89 [2000] 4.45 [1000] [18] 558 [22] Stroke, mm [in] 660 [26] 762 V26-01 V2-020 V V V V2-020 V2-050 V26-R05M V26-R10M V2-R05M Thrust, kn [lbf] 5.7 [12000] [10000] 5.58 [8000] [6000] [4000] 8.89 [2000] V2-R10M [40] Stroke, mm [in] 1270 [50] 1524 [60] V4-025 V V4-025 V4-050 V4-100 V V V V V4-R05M V4-R10M V55-R05M V55-R10M ritical Speed Graphs Speed, m/sec [in/sec] 2.0 [80] 1.52 [60] 1.01 [40] 0.51 [20] [20] 559 [22] [24] [26] Stroke, mm [in] 711 [28] 762 V [60] V V [50] V V [40] V V V26-R05M [20] V26-R10M 0.25 [10] V2-R05M V2-R10M 0 Speed, m/sec [in/sec] [40] [50] Stroke, mm[in] 1524 [60] V4-025 V V4-025 V4-050 V4-100 V V V V V4-R05M V4-R10M V55-R05M V55-R10M Rotary Inertia Reflected To The Motor Model ase, ball screw & M units kg-cm-s 2 [lb-in-s 2 ] ase, rollerscrew units kg-cm-s 2 [lb-in-s 2 ] Per inch [25.4mm] of stroke kg-cm-s 2 /25.4mm [lb-in-s 2 /in] V x 10-4 [7.04 x 10-4 ] x 10-4 [7.07 x 10-4 ] x 10-5 [1.11 x 10-5 ] V26 P x 10- [1.28 x 10- ] 1.64 x 10- [1.42 x 10- ] x 10-5 [1.11 x 10-5 ] V26 P x 10-4 [6.10 x 10-4 ] x 10-4 [7.0 x 10-4 ] x 10-6 [7.9 x 10-6 ] V26 P x 10-4 [4.14 x 10-4 ] x 10-4 [4.8 x 10-4 ] 6.89 x 10-6 [5.55 x 10-6 ] V x 10- [2.55 x 10- ] x 10- [2.57 x 10- ] 2.6 x 10-5 [2.29 x 10-5 ] V2 P1 6.7 x 10- [5.50 x 10- ] x 10- [6.04 x 10- ] 2.6 x 10-5 [2.29 x 10-5 ] V2 P x 10- [2.57 x 10- ].71 x 10- [2.9 x 10- ] x 10-5 [1.52 x 10-5 ] V2 P x 10- [1.72 x 10- ] x 10- [1.99 x 10- ] 1.16 x 10-5 [1.14 x 10-5 ] V4.626 x 10- [.15 x 10- ].658 x 10- [.17 x 10- ] x 10-5 [7.82 x 10-5 ] V4 P x 10-2 [1.27 x 10-2 ] x 10-2 [1.6 x 10-2 ] x 10-5 [7.82 x 10-5 ] V4 P x 10- [5.80 x 10- ] 7.79 x 10- [6.41 x 10- ] x 10-5 [5.21 x 10-5 ] V4 P x 10- [.87 x 10- ] x 10- [4. x 10- ] x 10-5 [.91 x 10-5 ] V x 10-2 [1.2 x 10-2 ] 1.41 x 10-2 [1.2 x 10-2 ] 4.21 x 10-4 [.66 x 10-4 ] V55 P1.825 x 10-2 [.2 x 10-2 ].825 x 10-2 [.2 x 10-2 ] 4.21 x 10-4 [.66 x 10-4 ] V55 P x 10-2 [1.6 x 10-2 ] x 10-2 [1.6 x 10-2 ] x 10-4 [2.44 x 10-4 ] V55 P x 10-2 [1.11 x 10-2 ] x 10-2 [1.11 x 10-2 ] x 10-4 [1.8 x 10-4 ] 225 Glade View rive, Roanoke, V US (540) info@huntvalveactuators.com huntvalveactuators.com

5 ase Unit imensions V26 V2 V4 V H J K L PRLLL RIV IMNSIONS 1 : ST/G1 2 : G M14x2.0 M20x1.5 M20x1.5 M6x G H J K INLIN RIV IMNSIONS G STROK + NL + M STROK + NL + L M V26 V2 V4 V55 all Screw ll dimensions are in millimeters (mm) unless otherwise noted. rawings are subject to change. ontact Hunt Valve for certified drawings. NL M Screw Roller Screw ase Unit Weights Units: kg [lbs] Standard & G1 Models G2 Models V26 V2 V4 V55 V26 V2 V4 V55 ase Unit - Inline, M Screw 2.9 [6.4] 5.4 [11.9] 9.6 [21.1] 18.8 [41.5] 6.6 [14.6] 11. [25.0] 20.2 [44.6] 7.7 [8] ase Unit - Inline, all Screw. [7.] 6.1 [1.5] 11.1 [24.4] 22.8 [50.] 7.2 [15.9] 12. [27.2] 22.2 [48.8] 42.6 [94] ase Unit - Inline, Roller Screw.8 [8.4] 7.1 [15.6] 12. [27.1] 22. [49.2] 8. [18.4] 14.6 [2.] 25.4 [56.1] 41.5 [91.5] dder for Parallel rive Options 0.7 [1.6] 2.2 [4.8] 4.4 [9.6] 7.1 [15.6] 1.9 [4.2] 5.7 [12.6] 11. [24.9] 18.5 [40.7] dder per inch (25.4mm) of Stroke 0.16 [0.4] 0.28 [0.6] 0.4 [0.88] 0.69 [1.5] 0.1 [0.68] 0.42 [0.92] 0.57 [1.25] 0.98 [2.17] Reference for it of Motors Please use this table to check which selected motors can be easily fit on the various Victory models. ontact Hunt Valve for motors that do not match the criteria below. Shaft diameters below presume use of a key, and larger shafts with or without a flat may be permissible after ngineering review. Motor ttribute V26 V2 V4 V55 P1 P1.5 P2 P1 P1.5 P2 P1 P1.5 P2 P1 P1.5 P2 Min Shaft iameter Max Shaft iameter Min Shaft Length Max Shaft Length Max rame Min Pilot/Min Max Pilot Max olt ircle

6 Victory -Series ctuators ottom Mounting imensions ottom Plate Mounting imensions V26 V2 V4 V55 V26 V2 V4 V55 (5X) (2X) G STROK + NL + H J M5x M8x M8x1.25 M16x G H J Refer to page 5 for NL dimensions. (4X) L STROK + NL + K (2X) J M G H G H J K L M Refer to page 5 for NL dimensions. ront lange Mounting imensions Trunnion Mounting imensions (4X) V26 V2 V4 V STROK + NL + V26 V2 V4 V g g g g Refer to page 5 for NL dimensions. Rear lange Mounting imensions Rear levis Mounting imensions V26 V2 V4 V55 V26 V2 V4 V H H H H9 (4X) MIN 20.0 h1 0.0 h1 0.0 h h TIL ll dimensions are in millimeters (mm) unless otherwise noted. 225 Glade View rive, Roanoke, V US (540) info@huntvalveactuators.com huntvalveactuators.com

7 Rod-nd imensions Victory -Series ctuators can be configured with either a Male Thread (MT) or emale Thread (T) rod-end. This primary rod-end is machined 00-series stainless steel and includes the grease fitting for lubrication of the actuator while it is in service. ll dimensions are in millimeters (mm) unless otherwise noted. MT Rod nd V26 V2 V4 V55 M14x2.0 x 0.2 L M20x1.5 x 9.4 L M20x1.5 x 9.4L M6x2.0 x 72.0 L Select the MT rod-end option when considering the addition of the ISO standard rod-end attachments below. T Rod nd M14x M20x M20x M6x Spherical Joint ttachment (HX) 2a V26 V2 V4 V55 14 H7 20 H7 20 H7 5 H a emale levis ttachment V26 V2 V4 V55 J G h11 40 h11 40 h11 70 h11 14 H9 20 H9 20 H9 5 H9 H (HX) 1 +/-.4mm 2 +/-.5mm +. / -.16mm / -.2mm / +.7mm G H J Male levis ttachment H G (HX) 1 +/-.mm 2 +/-.5mm +0 / -.2mm V26 V2 V4 V h11 40 h11 40 h11 65 h11 14 H9 20 H9 20 H9 5 H G H

8 Victory -Series ctuators Victory -Series Ordering odes Order xample: V26- G M- MT- -N2P L12X 1 Size & Version V26 V26, -Series V2 V2, -Series V4 V4, -Series V55 V55, -Series 2 nvironmental Version Standard G1 ood Grade - poxy Painted ody G2 ood Grade - ull Stainless xterior Screw Type & Lead See Table elow for Valid odes 4 rive Type Inline Motor Mounting w/oupling P1 1:1 Ratio Parallel Motor Mounting P :1 Ratio Parallel Motor Mounting P2 2:1 Ratio Parallel Motor Mounting 5 Stroke 8 Options / ccessories 0.00 Stroke in millimeters (increments of 1) SJ Spherical Joint Rod-nd ttachment 2 emale levis Rod-nd ttachment 2 6 ctuator Mounting M Male levis Rod-nd ttachment 2 M ottom Mounting w/ront Support N2P PNP Sensors, 2 Normally losed P ottom Plate Mounting N2N NPN Sensors, 2 Normally losed R Rear levis Mounting 1 N2R Reed Sensors, 2 Normally losed T Trunnion Mounting NP PNP Sensors, 2 N.., 1 N.O. ront lange Mounting NN NPN Sensors, 2 N.., 1 N.O. R Rear lange Mounting 1 NR Reed Sensors, 2 N.., 1 N.O. ront & Rear lange Mounting 1 T Mating ushings for Trunnion Mount ONN G2 Limit Sensor onnector 7 Rod-nd MT Male Thread Rod-nd 2 9 Motor daption ode T emale Thread Rod-nd onsult actory for Motor ode 1 R, R, mounting options only available with P1, P1.5, and P2 parallel motor mounting options. 2 Select MT rod-end option for use with SJ,, and M rod-end attachments. ONN option only for G2 environmental version; consult factory for sensor cable options. Screw Type Lead mm [inch] ode V26 V2 V4 V [0.20] [0.25] 025 all Screws 12.7 [0.50] [1.00] [1.875] 188 M Screws 5.08 [0.20] [0.25] 025 Roller Screws 5.0 [0.197] R05M 10.0 [0.94] R10M Meeting Specific Requirements Hunt Valve recognizes that each application is unique, and welcomes the opportunities that require modifications to standard products, or in some cases, complete custom designs. Hunt Valve prides itself on the ability to provide solutions to non-standard applications. Please contact Hunt Valve to discuss any specific linear motion needs. Inline Options Overview Parallel Options Overview Hunt Valve makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Hunt Valve provides this information as is and disclaims all warranties, expressed or implied, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. It is the responsibility of the product user to determine the suitability of this product for a specific application. 225 Glade View rive, Roanoke, V US (540) info@huntvalveactuators.com huntvalveactuators.com 8