Tubing, Fittings and Air Handling System Components

Size: px
Start display at page:

Download "Tubing, Fittings and Air Handling System Components"

Transcription

1 Tubing, Fittings and ir Handling System omponents

2 INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services Layout and design services ORDER INSTRUTIONS

3 LYING OUT TUING SYSTEM TUING SSEMLY orrect Fitting Use long turn 90 TY" fitting Incorrect Fitting Do not use steam or water fittings Preferred onnection where two horizontal mains join

4

5 TUING Standard Length at. No. () Steel luminum/ss Gauge When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 5

6 ELOWS 45 R R R at. No. () (ID) R Gauge at. No. () (ID) R Gauge 50L90 60L90 at. No. () (ID) R Gauge 6 R 90 at. No. () (ID) R Gauge 50SRL90 60SRL90 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

7 LONG RDIUS ENDS Radius end Radius end R 45 R on 24" enter Line at. No. () R Gauge on 30" enter Line at. No. () R Gauge 6 45 on 36" enter Line at. No. () R Gauge on 48" enter Line at. No. () R Gauge 6 45 on 60" enter Line at. No. () R Gauge 90 on 24" enter Line at. No. () R Gauge on 30" enter Line at. No. () R Gauge 6 90 on 36" enter Line at. No. () R Gauge on 48" enter Line at. No. () R Gauge 6 90 on 60" enter Line at. No. () R Gauge 60Q90 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

8 45 YLs H E at No. Size () E F H K R K R 45 F When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

9 45 YLs K H E (ID) F R 45 at. No. Size () Fig. No. E F H K R H E () K R 45 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum. 9

10 90 TYs at. No. Size () E F H K R H E K R 90 F 59T05 69T05 69T06 When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

11 90 TYs K H R 90 F E at. No. Size () Fig. No. E F H K R K H R 90 E When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

12 DOULE FITTINGS Standard Double 90 TYs K H R 90 F E at.no. Size () E F H K R 59DT DT Standard Double 45 YLs H E at.no. Size () E F H K R K R F K H E R F 90 F Standard Double 90 Elbows at.no. Size () E F H K R 50DL DL When Ordering Specify Material: arbon Steel, Galvanized Steel, Stainless Steel and luminum.

13 OUPLINGS Reducing ouplings D D E E F at. No. Size D () x (ID) F E Gauge * Slip ouplings Slip oupling at No. Size (ID) Gauge When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

14 DPTERS Male dapters at. No. D (MPT) x () Gauge D Expanded Male dapters D at. No. D (MPT) x (ID) Gauge Female dapters at. No. D (FPT) x () Gauge D Expanded Female dapters at. No. D (FPT) x (ID) Gauge D When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum.

15 DPTERS Female Reducing dapters at. No. D (FPT) x () Gauge D Expanded Female Reducing dapters D at. No. D (FPT) x (ID) Gauge H dapter Tees at. No. (ID) x D (FPT) H D 90 Elbow dapters D at. No. (ID) x D (FPT) E E D 45 Female Elbow dapters at. No. (ID) x D (FPT) R Gauge R 45 Male dapter Nipples at. No. (ID) (MPT) 2-1/8" Male dapters at. No. (MPT) x When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above.

16 MISELLNEOUS 3/8" Hole Tubing Hanger Tubing Hangers at. No. (ID) Gauge 00H50 00H60 Tubing Plugs at. No. () D D at. No. (ID) D D Slip Welding ollar Tubing Nipples at. No. () Gauge Slip Welding ollars at. No. (ID) Gauge When Ordering Specify Material: arbon Steel, Stainless Steel, Galvanized Steel and luminum, except as noted above.

17 JOINING METHS Quick lamp oupling ap Size ouplings aps Part No. Length Part No. Length Quick lamp ouplings & aps ompression ouplings ompression oupling Tube Size Part No. Length Number olts olt Size Weight

18 RUER SLEEVES ND LMPS Normal Size Type Nominal ID Length High Temperature Sleeve With lamps Part No. lamp Only Part No. lamp Qty LM LM LM LM LM90009 LM90009 SMP WP

19 SHRINK SLEEVES at. No. Part No. Tube Size 50S S Do Not Use Pin Point Flame. 4 WETHER PS Outlet Size (ID) Part No. W90005 W90006 W " - 8" 10" - 22"

20 HOSES Note: HOSE SSEMLIES (EXEPT TUFF-FLEX ND YELLOW R RE PRUTS) RE TESTED FOR ELETRIL ONDUTIVITY TO SSURE STTI ELETRIITY IS MINIMIZED. Inside Lengths and Part Numbers Hose Type Diameter 12 1 /2' 25' 37 1 /2' 50' Light-Duty HI 1 PV 1 /2" HOS90164 HOS90166 HOS90168 HOS " HOS90176 HOS90178 HOS90180 HOS90182 Medium-Duty Polyethylene TUFF-FLEX NON STTI RESISTNT 1 1 /4" HOS90081 HOS90082 HOS90212 HOS /2" HOS90077 HOS90078 HOS90079 HOS " HOS90084 HOS90085 HOS90086 HOS /2" HOS90088 HOS90089 HOS90090 HOS90091 Heavy-Duty PV KLM 1 1 /2" HOS90188 HOS90190 HOS90192 HOS " HOS90200 HOS90202 HOS90204 HOS90206 Heavy-Duty Urethane SPENER-FLEX 1 1 /2" HOS90241 HOS90243 HOS90245 HOS90247 Heavy-Duty Vinyl PYTHON 1 1 /2" HOS90101 HOS90103 HOS90105 HOS " HOS90109 HOS90111 HOS90113 HOS90115 Heavy-Duty Rubber RHINO 1 1 /2" HOS90117 HOS90119 HOS90208 HOS " HOS90123 HOS90125 HOS90210 HOS90127

21 HOSES R RE KIT K90104 K90108 Replacement rubber backing RU90001 Weight (lbs./ft.) Vacuum Rating "Hg olor Flexibility Durability pplication onstruction Grey Grey Excellent Excellent Fair Fair ommercial, Light Industrial Duty, Offices (Temp Range: 20 to +150 F) Fiber-reinforced PV Hose over Spring Steel Helix Static Resistant Grey lue lue Excellent Excellent Excellent Good Good Good General Vacuum leaning, ommercial, ar Wash, Offices (Temp Range: 20 to +150 F) Polyethylene Two-Piece onstruction rush Proof Orange Excellent Good lue lue Good Good Very Good Very Good General Service, Schools, Industrial leaning (Temp Range: 22 to +104 F) PV ompound Plastic Helix opper Ground Wire brasion Resistant Static Resistant lue w/ lack Very Good Excellent General Service, Industrial leaning, Schools (Temp Range: 40 to +170 F) PV Helix Urethane ore brasion Resistant opper Ground Wire hemical Resistant Static Resistant lue lue Very Good Very Good Very Good Very Good General Service, Schools, Hospitals, lean Rooms (Temp Range: 20 to +120 F) Smooth Vinyl over Steel Wire Nylon Yarn Foam Inner Wall hemical Resistant Static Resistant lack lack Good Good Excellent Excellent Industrial and Heavy ommercial Vacuum leaning in Factories, Foundries (Temp Range: 40 to +200 F) raided SS Ground Wire Nitrile Rubber Tube brasion Resistant Neoprene over Oil Resistant Static Resistant

22 WLL INLET VLVES FOR 1-1/2" DIMETER HOSE NOTE: Optional lock type covers are available. 2" male thread-exposed pipe. The popular (standard) valve /32" long. VLV90083 (VLV90091 Lock Type) (8720-Type E) 1.13 lb. 2" female thread-exposed pipe /32" long. VLV90101 (VLV90102 Lock Type) (8815-Type E) 1.50 lb. 2" male thread VLV90083 with standard flange. VLV90084 (VLV90093 Lock Type ) (8705-Type D) 1.50 lb. 2" female thread VLV90101 with standard flange. VLV90103 (VLV90104 Lock Type) (8805-Type D) 1.78 lb. 2" male thread VLV90083 with recessed flange. VLV90085 (VLV90095 Lock Type ) (8705-Type D) 1.63 lb. 2" female thread VLV90101 with recessed flange. VLV90105 (VLV90106 Lock Type) (8810-Type D) 1.75 lb. 2" male thread-exposed pipe with short body. 1 7 /8" long. VLV90087 (VLV90092 Lock Type) (8730-Type E) 1.00 lb. 2" male thread VLV90087 with standard flange. For limited wall space. VLV90088 (VLV90094 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread-exposed pipe. Use when a1 1 / 2" thread must be used. 2 7 /16" long. VLV90082 (VLV90090 Lock Type) (8740-Type ) 1.13 lb. 1 1 / 2" male thread VLV90082 with standard flange. VLV90089 (VLV90097 Lock Type) (8745-Type ) 1.25 lb. 2" male thread VLV90087 with recessed flange. For limited wall space. VLV90086 (VLV90096 Lock Type) (8715-Type D) 1.25 lb. 1 1 / 2" male thread VLV90082 with recessed flange. VLV90098 (VLV90099 Lock Type) (8745-Type ) 1.25 lb. 304SS version of an 8720 Type E inlet valve with 2" male thread valve. VLV lb. 304SS recessed flange to fit VLV FLG lb. 304SS standard flange to fit VLV90239 (Not Shown). FLG lb.

23 FLOOR INLET VLVES FOR 1-1/2" DIMETER HOSE It is recommended that the hose be connected to these valves using a Part No. EVT90005 floor elbow. 2" male thread Installed flush with floor surface. VLV90110 (VLV90111 Lock Type) (8900-Type G) 1.88 lb. 2" male thread eveled edge designed for use with carpets. VLV90112 (VLV90113 Lock Type ) (8905-Type R) 1.88 lb. hrome plated version of a VLV90110 Type G floor valve. VLV lb. 304SS version of a VLV90110 Type G floor valve. VLV lb. LOKING INLET VLVES Optional lock type covers can be furnished on all wall and floor inlet valves designed for use with 1 1 /2" diameter hose. Easy-Lift keyless floor valve. VLV90449 omplete valve (chrome body with aluminum cover/lid) LIV90036 luminum cover/lid only (replacement for existing valves) INLET VLVES FOR 2" DIMETER HOSE OR LRGER 2" male thread-exposed pipe. ccepts 2" male hose coupling. VLV90100 (8755-Type I) 1.25 lb. 3" male thread-exposed pipe. ccepts 3" male hose coupling. VLV90108 (8675-Type L) 4.25 lb. 2 1 /2" male thread-exposed pipe. ccepts 2 1 /2" male hose coupling. VLV90107 (8690-Type J) 2.75 lb. 4" male thread-exposed pipe. ccepts 4" male hose coupling. VLV90109 (8676-Type K) 6.25 lb. 5", 6" and 8" inlet valves are also available.

24 IR GTE VLVES Diameter () Galvanized Part No. *Stainless Steel Part No. *luminum Part No. at. No. Length () Housing Width () Tubing L (D) Housing Length (E) djustment Slide (F) 6 5 6

25 LST GTES Part No. Size * D E F G H J K pprox. Wt. (lbs.) Specifications repacking can be done in place Standard Materials of onstruction

26 WFER UTTERFLY VLVES 4 LIGNMENT HOLES MTH L FLNGE DRILLING 8-7/ LIGNMENT HOLES MTH L FLNGE DRILLING 1-1/ /4 Specifications: Size () Part No. at. No. E DJUSTLE PKING NUT Valve L to ody End () D Valve L to Lever rm Exten. () E 6-1/ D 3-1/4 Height (D) Outside Diamter (E) Weight lbs. 6 Nominal Size Size () Part No. at. No. Valve L to ody End () Valve L to Lever rm Exten. () Height (D) Outside Diameter (E) Weight lbs. FLNGE DPTERS Sizes 4" - 12" Illustration Sizes 14" - 20" Illustration Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter olt ircle Number of olt Holes olt Hole Dia. Tube Neck Gauge

27 FLNGE DPTERS Size (J) Part No. at. No. Thickness Gauge (K) Length (L) Outside Diameter olt ircle Number of olt Holes 5 05Q Q Q olt Hole Dia. Tube Neck Gauge

28 OMPNION FLNGES Type Type Type Long Neck Steel Ring Threaded (FPT) Tube or Pipe Size Tube or Pipe Size Schedule 40 Sleeve onnections Weld onnections Pipe Type "" Part No. Type "" Part No. Type "" Part No. Diameter (J) Thickness (K) Length (L) Outside Diameter () olt ircle () Number of olt Holes olt Hole Diameter F90015 RF90006 FLG /2 * /2 8 3/4 F90022 RF90012 FLG /2 1/ /2 8 3/4 RF / /2 8 7/8 F90014 RF90007 FLG /2 ** /2 8 7/8 F90023 RF90013 FLG /8 1/ /2 8 7/8 F90016 RF90004 FLG /2 **3 13-1/2 11-3/4 8 7/8 F90024 RF90017 N/ 8-5/8 1/ /2 11-3/4 8 7/8 F90013 RF90008 FLG /2 *** / F90025 RF90060 N/ 10-3/4 1/ / F90026 RF90005 N/ 12 1/ F90027 RF90061 N/ 12-3/4 1/ F90028 RF90000 N/ 14 5/8 6-1/ / /8 F90029 RF90040 N/ 16 5/8 6-1/8 23-1/2 21-1/ /8 F90030 RF90041 N/ 18 5/8 6-1/ / /4 F90031 RF90081 N/ 20 3/4 6-1/4 27-1/ /4 F90032 RF90063 N/ 24 3/4 6-1/ / /8

29 HEK VLVES Size ID Size ID Part No. EPDM Part No. EPDM Wafer Style - 125# lass Part No. Silicone Flanged Ends - 125# lass Part No. Silicone Standard Specs: Standard Specs: Size ID Part No. Silicone Male Pipe Thread Ends (MPT) Standard Specs:

30 FRITION LOSS HRT Step 1: Step 2: Step 3: lso:

31

32 Products & Services Industrially rated products offering effective solutions for air and gas handling problems: omplementary accessories with single source convenience and compatibility: panels UL, UL Listed and.e. ompliant omprehensive engineering and other customer support services: specialists in air and gas handling technology Worldwide organization of sales representatives and distributors offering: assistance For the name and telephone number of your local Spencer representative, call or lowers & Vacuum Systems with an Engineering Edge The Turbine ompany, 600 Day Hill Road, Windsor, T TEL Fax ulletin No. 600Q.1 opyright 2008 The Spencer Turbine ompany Printed in U.S K

Vacuum Cleaning Attachments and Accessories

Vacuum Cleaning Attachments and Accessories Vacuum Cleaning Attachments and Accessories Reach overhead, underneath and all around. ASSEMBLY INSTRUCTIONS Male Coupling to Inlet Valve Valve Cover Hook Device Inlet Valve Male Coupling Male Hose Coupling

More information

BULLETIN 241R.2 VACUUM CLEANING ATTACHMENTS AND ACCESSORIES

BULLETIN 241R.2 VACUUM CLEANING ATTACHMENTS AND ACCESSORIES BULLETIN 241R.2 VACUUM CLEANING ATTACHMENTS AND ACCESSORIES ASSEMBLY INSTRUCTIONS Male Coupling to Inlet Valve Valve Cover Hook Device Inlet Valve Male Coupling Male Hose Coupling to Female Coupling Locking

More information

INSTALLATION INSTRUCTIONS FOR PISTON TYPE FLUSHOMETER EXPOSED CLOSET AND URINAL INSTALLATIONS

INSTALLATION INSTRUCTIONS FOR PISTON TYPE FLUSHOMETER EXPOSED CLOSET AND URINAL INSTALLATIONS ode No. 0816477 Rev. 0 (04/07) Flushometers INSTLLTION INSTRUTIONS FOR PISTON TYPE FLUSHOMETER EXPOSED LOSET ND URINL INSTLLTIONS loset Flushometer for 1½" Top Spud rown II & rown 111 rown II & rown 115

More information

A&N CORPORATION High Vacuum Manufacturers Since 1965 TRI-SEAL

A&N CORPORATION High Vacuum Manufacturers Since 1965 TRI-SEAL &N ORPORTION High Vacuum Manufacturers Since 1965 TRI-SEL T L O G VUUM TEHNOLOGY DISTRIUTION TRI-SEL FLNGE SYSTEM Page INTRODUTION...1-2 LMPS: HINGED QUIK LMP TYPE 3/4" - 2" luminum - Elastomer Seal Only...3

More information

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are

More information

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are

More information

Valves & Flow Control Components Valves & Flow Control Components

Valves & Flow Control Components Valves & Flow Control Components Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110

More information

EXHAUST. Accessory Catalog and Specifications. Silex INNOVATIONS NGP032

EXHAUST. Accessory Catalog and Specifications. Silex INNOVATIONS NGP032 EXHUST ccessory atalog and Specifications Silex INNOVTIONS NGP032 PSSIONTE OLLORTIVE INNOVTIVE TRUSTED EMPOWERED ENERGIZED World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI 53589

More information

INSTALLATION INSTRUCTIONS FOR SLIMLINE BEDPAN WASHER WITH EXPOSED ROYAL AND REGAL XL FLUSHOMETER

INSTALLATION INSTRUCTIONS FOR SLIMLINE BEDPAN WASHER WITH EXPOSED ROYAL AND REGAL XL FLUSHOMETER ode No. 0816191 Rev. 2 (05/10) INSTLLTION INSTRUTIONS FOR SLIMLINE EDPN WSHER WITH EXPOSED ROYL ND REGL XL FLUSHOMETER Slimline edpan Washers Royal PW-1000 Standard Royal PW-1005 With Deoseptic Unit Royal

More information

Tutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose

Tutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose PTF & PTF & Table of ontents ydraulic & & Fit. Tutorial, Introduction & enefits... 130-131 PTF ssembly & Nomenclature... 132 PTF & Smooth ore 919 S 100R14... 133 919 S 100R14 (Static-Dissipative )... 133

More information

Smooth Flow TUBING & FITTINGS SPECIFICATIONS

Smooth Flow TUBING & FITTINGS SPECIFICATIONS Smooth Flow TUBING & FITTINGS SPECIFICATIONS 2 Index INDEX TUBING...3 Standard Elbows & Bends Bending Capabilities...4 Standard Radius Elbows...5 Short Radius Elbows...5 Standard Long Radius Bends...6

More information

Smooth Flow Tubing & Fittings Specifications

Smooth Flow Tubing & Fittings Specifications Smooth Flow Tubing & Fittings Specifications 2 Index Index TUBING... 3 Standard Elbows & Bends Bending Capabilities... 4 Standard Radius Elbows... 5 Short Radius Elbows... 5 Standard Long Radius Bends...

More information

Modulating Water Valves and Bulb Wells

Modulating Water Valves and Bulb Wells Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature

More information

Nor-Cal Products. where technology takes shape. vacuum products catalog

Nor-Cal Products. where technology takes shape. vacuum products catalog Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings

More information

Products Recommended for Steam Service

Products Recommended for Steam Service oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking

More information

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings. Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...

More information

BC SERIES CHECK VALVE

BC SERIES CHECK VALVE SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG

More information

Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series

Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable

More information

Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500

Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500 Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View

More information

INSTALLATION INSTRUCTIONS FOR EXPOSED GEM 2 PISTON TYPE WATER CLOSET AND URINAL FLUSHOMETERS

INSTALLATION INSTRUCTIONS FOR EXPOSED GEM 2 PISTON TYPE WATER CLOSET AND URINAL FLUSHOMETERS ode No. 0816178 Rev. (04/07) INSTLLTION INSTRUTIONS FOR EXPOSE GEM PISTON TYPE WTER LOSET N URINL FLUSHOMETERS loset Flushometer for 1½ Top Spud MOELS 110/111, 115 & 136 Urinal Flushometer for 1¼ Top Spud

More information

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2

More information

Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings

Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings

More information

INSTALLATION INSTRUCTIONS FOR OPTIMA SYSTEMS SENSOR ACTIVATED ROYAL CONCEALED and EXPOSED URINAL FLUSHOMETERS

INSTALLATION INSTRUCTIONS FOR OPTIMA SYSTEMS SENSOR ACTIVATED ROYAL CONCEALED and EXPOSED URINAL FLUSHOMETERS ode No. 0816164 Rev. 4 (05/09) INSTLLTION INSTRUTIONS FOR OPTIM SYSTEMS SENSOR TIVTED ROYL ONELED and EXPOSED URINL FLUSHOMETERS EXPOSED FLUSHOMETER ONELED FLUSHOMETER Exposed Urinal Flushometers 1-1/4"

More information

Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F

Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,

More information

Safety Stations with Eye/Face Wash

Safety Stations with Eye/Face Wash Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads

More information

Safety Stations with Eyewash

Safety Stations with Eyewash Safety Stations with yewash F G1942 Safety Station with yewash, Freeze and Scald Protection Valves pplication: ombination eyewash and shower safety station. Unit is furnished with temperature-actuated

More information

966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code

966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8

More information

BRITISH STANDARD THREADS ALL MEASUREMENTS IN MM DEPTH OF THREADS IMPERIAL METRIC A P H B E

BRITISH STANDARD THREADS ALL MEASUREMENTS IN MM DEPTH OF THREADS IMPERIAL METRIC A P H B E Fittings GLVNISED MLLELE IRON PIPE FITTINGS Specifications STNDRD ND IDENTIFITION: Standard for production and use EN 10242 : 1994. Fittings made of high quality blackheart malleable cast iron to STM -197,

More information

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi

Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,

More information

Engine Silencing Solutions

Engine Silencing Solutions Engine Silencing Solutions 25 Years of Experience in the Power-Gen, Off-Highway, Industrial, and Marine Industries Manufactured by: EM PRODUTS Phillips & Temro Industries LITE01-3200 3200-001 ontact Information

More information

INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES

INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS Industrial Vacuum HOSES, TOOLS & ACCESSORIES Commercial Duty Hoses Crushproof Plastic 4 Flexible Plastic 4

More information

Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.

Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice. OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,

More information

CONN in mm in mm in mm SIZE lbs kg PX " /4"

CONN in mm in mm in mm SIZE lbs kg PX  /4 ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8

More information

Pneumatic Fittings & Tubing

Pneumatic Fittings & Tubing Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic

More information

ACCESSORIES TABLE OF CONTENTS

ACCESSORIES TABLE OF CONTENTS Filters page 532 Fittings, Nylon pages 543-544 Miscellaneous ccessories pages 550-551 Siphons/ooling Extensions pages 533-534 Pneumatic Valves page 544 Gage Guards/ Pressure Snubbers pages 534-535 Pneumatic

More information

STAINLESS STEEL FITTINGS

STAINLESS STEEL FITTINGS nvilpress Stainless Steel Fittings provide a complete line of mechanically joined press-fittings in sizes 1 /2 through 2 inches. These fittings are designed to work with Schedule 5 or 10 Stainless Steel

More information

Thermoplastik- & Fluorpolymerprodukte

Thermoplastik- & Fluorpolymerprodukte Thermoplastik- & luorpolymerprodukte Parflex - luorpolymerschläuche Katalog T 4660/US 01/12(2) Vertrieb rau Krauspe Tel.: 03525 680110 krauspe@haupt-hydraulik.de rau öhler Tel.: 03525 680111 goehler@haupt-hydraulik.de

More information

Pneumatic Quick Couplings

Pneumatic Quick Couplings Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single

More information

SV73 Cast Iron Safety Valve

SV73 Cast Iron Safety Valve Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and

More information

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product

More information

VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'

VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'

More information

Thermoplastic Couplings

Thermoplastic Couplings Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5

More information

Self Cleaning Suction Screen

Self Cleaning Suction Screen Effective 1/1/09 WATERMASTER Self Cleaning Suction Screen All galvanized construction with a heavy duty steel body with #3 expanded metal steel lid covered by #8 mesh, 20 gauge stainless cloth screen.

More information

Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal

Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal onstruction Miniature fittings Hose nipple arb fitting arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal Tubing ap nut ertainly

More information

Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).

Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder). Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.

More information

Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange

Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients

More information

(Standard) (Heavy Duty) (Heavy Duty w/ (Guillotine) (Flat Strap U-Bolt) Welded Saddle)

(Standard) (Heavy Duty) (Heavy Duty w/ (Guillotine) (Flat Strap U-Bolt) Welded Saddle) ESSORIES LMPS (50) (50) (50) (50) Size Indiv. ulk (50) (50) Indiv. Indiv. Indiv. Indiv. Indiv. Pkg. Pkg. Indiv. Pkg. ulk Pkg. Part Part Part Part Part 1¹/₈ 35322 1¹/₄ 35323 1³/₈ 35324 1¹/₂ 35325 34112

More information

Visibility & REliability Sight Flow Indicators & Sight Windows

Visibility & REliability Sight Flow Indicators & Sight Windows Visibility & REliability Sight Flow Indicators & Sight Windows Featuring KSF SIHt Flow INDITORS Engineered Liquid Flow Solutions www.kenco-eng.com SIHT FLOW INDITORS KENO Engineering ompany offers a variety

More information

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300 ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality

More information

IDF / ISS Hygienic Union BS 4825 Part 4

IDF / ISS Hygienic Union BS 4825 Part 4 IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred

More information

Stainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to

Stainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll

More information

Cord Connectors AMERICAN FITTINGS. Corporation. Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA

Cord Connectors AMERICAN FITTINGS. Corporation. Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA ord onnectors Specification Grade lloy Steel, luminum, Stainless Made in the US Why ren t Your ables Wearing the EST? STOP USING OUTTE OR ONNETORS N ONNET WITH THE EST! MFIO SPE-grade Strain Relief ord

More information

Flowline Products and Services World Proven Chiksan and Weco Equipment.

Flowline Products and Services World Proven Chiksan and Weco Equipment. Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design

More information

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers

More information

DIMENSIONS DIMENSIONS PKG. WIRE MAX. BOLT REC. STOCK PKG. WIRE MAX. BOLT REC. STOCK CAT. NO. QTY. RANGE INS. HOLE TOOL

DIMENSIONS DIMENSIONS PKG. WIRE MAX. BOLT REC. STOCK PKG. WIRE MAX. BOLT REC. STOCK CAT. NO. QTY. RANGE INS. HOLE TOOL Ring Terminals Sta-Kon Rings, Forks and Locking Forks omplete line of installing tools engineered to match tool with terminal First to gain military approval for pressure connections many styles available

More information

Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.

Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories. 36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with

More information

Butterfly Valve - Series 200

Butterfly Valve - Series 200 utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple

More information

Miniature Fittings Series M

Miniature Fittings Series M Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

EM... The Quiet Alternative

EM... The Quiet Alternative EM PROUTS PHILLIPS & TEMRO INUSTRIES EM PROUTS 538 ottonwood Lane Prior Lake, Minnesota 55372 (952) 44-9 fax: (952) 44-34 phillipsandtemro.com EM... The Quiet lternative Industrial & Marine Silencers Exhaust

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling...

More information

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets Pin & Sleeve Heavy Duty Industrial Wiring Devices for North merican and European Markets Pin & Sleeve SFETY, PERFORMNE ND DURILITY...IN SNP! Extensive Product Family: - Safe and reliable, portable electrical

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS ARBON STL PIP - GROOVD FITTINGS Grooved nd Fittings S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles.

More information

Cipriani Harrison Valves Corp.

Cipriani Harrison Valves Corp. pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum

More information

Integrated Process Solutions

Integrated Process Solutions Integrated Process Solutions w w w. m k s i n s t. c o m Series 76 ISO-Universal fittings Sizes to 0 (2½'' to 25'') Series 76 ISO-Universal components are a vacuum flanging system for 63 mm to 1000 mm

More information

:,Rhino SD/XD G/D 24 Vdc ISO

:,Rhino SD/XD G/D 24 Vdc ISO :,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T

MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Protector XL Floor-Mounted Laboratory Hoods Features & Benefits

Protector XL Floor-Mounted Laboratory Hoods Features & Benefits Protector XL FLOOR-MOUNTED LAORATORY HOODS Protector XL Floor-Mounted Laboratory Hoods Features & enefits Protector XL Floor-Mounted Laboratory Hoods accommodate laboratory procedures that require over-sized

More information

Parts List Safety Stations

Parts List Safety Stations Safety Stations tem Part Number escription Shower eads P450-032OR Orange S Plastic Shower ead P450-032RN reen S Plastic Shower ead P450-032YL Yellow S Plastic Shower ead P450-048 10 ia. Stainless Steel

More information

Section 8. Copper Series

Section 8. Copper Series Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for

More information

Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.

Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket. Series 10-M Miniature Fittings onstruction RoHS irectional ontrol Valves arb onfiguration for easy insertion into the Holds the tube tightly. ody lectroless plated nickel Low tightening torque Tight seal

More information

CONTROL VALVES W910 Series

CONTROL VALVES W910 Series ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,

More information

AWWA Grooved Fittings

AWWA Grooved Fittings WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness

More information

BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012

BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012 CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections

More information

Diameters 10 Length w/ Coupling 5 Length w/ Coupling Trade Size Metric Size OD ID Wt./Ft. Type 304 Type 316 Type 304 Type 316

Diameters 10 Length w/ Coupling 5 Length w/ Coupling Trade Size Metric Size OD ID Wt./Ft. Type 304 Type 316 Type 304 Type 316 STINLESS STEEL ONDUIT Diameters 10 Length w/ oupling 5 Length w/ oupling Trade Size Metric Size OD ID Wt./Ft. Type 04 Type 16 Type 04 Type 16 ½ 16 0.840 0.620 0.82 S40510T00 S60510T00 S40505T00 S60505T00

More information

quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data

quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM

More information

INSTALLATION INSTRUCTIONS FOR SENSOR ACTIVATED LAVATORY FAUCETS

INSTALLATION INSTRUCTIONS FOR SENSOR ACTIVATED LAVATORY FAUCETS ode No. 0816302 Rev. 3b (11/08) INSTLLTION INSTRUTIONS FOR SENSOR TIVTE LVTORY FUETS Model EF-187 attery Powered, Sensor ctivated Lavatory Faucet Furnished with a hrome Plated Metal Throat Plate Model

More information

Tube Applicable for nylon, soft nylon and polyurethane tubing.

Tube Applicable for nylon, soft nylon and polyurethane tubing. Miniature Fittings Series M pplicable Tubing: ø3.2, ø4, ø6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening

More information

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5 atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product

More information

Stovepipe DVL. DuraBlack. Double-wall interior stovepipe for connecting woodstoves to chimney. ULC S641.

Stovepipe DVL. DuraBlack. Double-wall interior stovepipe for connecting woodstoves to chimney. ULC S641. Stovepipe DVL Double-wall interior stovepipe for connecting woodstoves to chimney. UL S641. Duralack Single-wall interior stovepipe for connecting woodstoves to chimney. Specifications DVL pplications

More information

Piston Accumulators Series Catalog HY /US Page

Piston Accumulators Series Catalog HY /US Page Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End

More information

DVL. DuraBlack. Double-wall interior close clearance stovepipe for connecting woodstoves to chimney. ULC S641.

DVL. DuraBlack. Double-wall interior close clearance stovepipe for connecting woodstoves to chimney. ULC S641. DVL Double-wall interior close clearance stovepipe for connecting woodstoves to chimney. UL S641. Duralack Single-wall interior stovepipe for connecting woodstoves to chimney. Specifications DVL pplications

More information

Tubing and Accessories

Tubing and Accessories Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3

More information

High-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability

High-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076

More information

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting

More information

Saf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent

Saf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange lvd Grand

More information

421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11

421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11 atalog 4400 US Hydraulic Visual Index 601-8 422-8 424-8 Hydraulic Hydraulic 421W -9 426-9 X -9 482T -10 S 100R1 TYP T Protective Wire over S 100R3 High Temperature S 100R1 TYP T Worldwide ISO 1436-1 TYP

More information

Cat. No. for TNSC Configuration

Cat. No. for TNSC Configuration 2 www.controlwell.com TT TY TV TNS SNP ON ONDUIT OUPLERS Distributors made of Polyamide can be used instead of a distribution box. These special connectors are used to clamp standard corrugated conduits.

More information

Sanitary Fittings & Valves. Quick-Connect Couplers. Male Quick-Connect Couplers. Female Quick-Connect Couplers

Sanitary Fittings & Valves. Quick-Connect Couplers. Male Quick-Connect Couplers. Female Quick-Connect Couplers Quick-Connect Couplers These Quick-Connect couplers are ideal for compressed gas applications due to their unique eight stainless steel ball bearing seal system, which prevents leaks. They are machined

More information

Series 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification

Series 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal

More information

Prices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01

Prices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01 NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS S VITAULI PUBLIATION 10.01 FOR DTAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile

More information

JASON URETHANE POWER TRANSMISSION BELTS

JASON URETHANE POWER TRANSMISSION BELTS JSON URETHNE POWER TRNSMISSION BELTS UNIFLE BELTS Manufactured in urethane with continuous helically wound steel cable cords, Jason's Uniflex belts are ideal for situations where high stress and load demands

More information

EQUIPMENT & ACCESSORIES

EQUIPMENT & ACCESSORIES 0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06

More information

Pressfit System for Carbon Steel Pipe

Pressfit System for Carbon Steel Pipe R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit

More information

RS4S-P86Z* SERIES PTO

RS4S-P86Z* SERIES PTO RSS-P8Z* SERIES PTO RSS-P82Z1 SERIES PTO FOR ZF/MERITOR FREEDOMLINE TRNSMISSION PRTS LIST ND SERVIE MNUL Muncie Power Products, Inc. RSS-P82Z1-E1X PRTS LIST 15 1 OUTPUT SHFT OPTION 110 SERIES OMPNION FLNGE

More information