HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm
|
|
|
- Gabriella Briggs
- 5 years ago
- Views:
Transcription
1 HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS VALVES (OPTIONAL) F18 Features DFFX Reverse Flow models filter fluid in the forward direction and bypass the filter element when the flow direction is reversed. O-ring seals are used to provide positive, reliable sealing. Choice of O-ring materials provide compatibility with petroleum oils, synthetic fluids, water-glycols, oil/water emulsions, and high water based fluids. Screw-in bowl/lid mounted below the filter head requires minimal clearance to remove the element for replacement; contaminated fluid cannot be washed downstream when element is serviced. Clogging indicators have no external dynamic seal. This results in high reliability due to magnetic actuation which eliminates a leak point. A poppet-type bypass valve (optional) located in the filter head provides positive sealing during normal operation and fast opening during cold starts and flow surges. Applications Agricultural Automotive Construction Industrial Railways Technical Specifications Mounting Method 4 mounting holes Port Connection DFFX 330/660/13 2 SAE Flange Code 62 Flow Direction Inlet: Side Outlet: Side or Top Construction Materials Head Single piece bowl 1.X Bowl Two piece bowl 2.X Housing Lid/Cap Flow Capacity /13 Housing Pressure Rating Max. Allowable Working Pressure Fatigue Pressure Burst Pressure Ductile iron Steel Steel Steel Element Collapse Pressure Rating BH4HC, V ON, W/HC Fluid Temperature Range 80 gpm (303 lpm) 100 gpm (379 lpm)/160 gpm (606 lpm) 6090 psi (4 bar) Contact HYDAC Office Contact HYDAC Office 3045 psid (210 bar) 290 psid ( bar) 14ºF to 212ºF (-10ºC to 100ºC) Consult HYDAC for applications operating below 14 F (-10 C) Fluid Compatibility Compatible with all hydrocarbon based, synthetic, water glycol, oil/water emulsion, and high water based fluids when the appropriate seals are selected. Indicator Trip Pressure P = 29 psid (2 bar) -10% (optional) P = 72 psid (5 bar) -10% (standard) P = 116 psid (8 bar) -10% (optional) Bypass Valve Cracking Pressure P = 43 psid (3 bar) +10% (optional) P = 87 psid (6 bar) +10% (standard) Non Bypass Available
2 Model Code Filter Type DFFX = Reverse Flow Bypass Filter Element Media ON = Optimicron W/HC = Wire Mesh Size and Nominal Connection 330 = 2 Flange SAE Code = 2 Flange SAE Code = 2 Flange SAE Code 62 Pressure Range T = 6000 psi (414 bar) Head Design (omit) = T head Size and Nominal Configuration L = 2 SAE Code 62 Flange) BH/HC = Betamicron (High Collapse) V = Metal Fiber L = L Head Filtration Rating (microns) 3, 5, 10, = BH/HC 1, 3, 5, 10, 15, = ON 25, 74, 149 = W/HC 3, 5, 10, = V Type of P Clogging Indicator A, BM, C, D (others available upon request) Type Number 1 = One piece bowl (sizes only 2 = 2 Piece Bowl (size ) 3 = Upside-down Mounting (size ) Modification Number (latest version always supplied) Port Configuration 16 = SAE flange ports HIGH PRESSURE FILTERS DFFX BN/HC 13 T L L 3 BM 2. X / 16 V. Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EPR = Ethylene propylene rubber (EPR) Bypass Valve (omit) = Non-bypass Critical applications (high collapse element required) B3 = 43 psid (3 bar) (Optional) B6 = 87 psid (6 bar) (Standard setting for pressure filters) Supplementary Details SO263 = Modification of ON & W/HC elements for Skydrol or HYJET phosphate ester fluids W = VD indicator modified with a brass piston for use with high water based emulsions/solutions (HFA) & (HFC) or when using V elements L24, L48, L110, L2 = Lamp for D-type clogging indicator (LXX, XX = voltage) T100 = Indicator Thermal Lockout, 100ºF (C and D indicators only) cruus = Electrical Indicators with underwriter s recognition SFREE = Element specially designed to minimize electrostatic charge generation Replacement Element Model Code 13 D 003 BH4HC / V. Size 0330, 0660, 13 Filtration Rating (micron) 1, 3, 5, 10, 15, = ON 3, 5, 10, = BH4HC 25, 74, 149 = W/HC 3, 5, 10, = V Element Media BH4HC, ON, W/HC, V Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EP = Ethylene propylene rubber (EPR) Supplementary Details SO263 = (same as above) SFREE = (same as above) Clogging Indicator Model Code VD 8 BM. X / V. Indicator Prefix VD = G 1/ psi Trip Pressure 2 = 29 psid (2 bar) (option) 5 = 72 psid (5 bar) (standard) 8 = 116 psid (8 bar) Type of Indicator A = No indicator, plugged port BM = Pop-up indicator (manual reset) C = Electric switch SPDT D = Electric switch and LED light SPDT Modification Number Supplementary Details Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EP = Ethylene propylene rubber (EPR) Light Voltage (D type indicators only) L24 = 24V L48 = 48V L110 = 110V L2 = 2V Thermal Lockout (VM, VD types C, D, J, and J4 only) T100 = Lockout below 100 F Underwriters Recognition (VM, VD types C, D, J, and J4 only) cruus = Electrical Indicators with underwriter s recognition W = VD indicator modified with a brass piston for use with high water based emulsions/solutions (HFA) & (HFC) (For additional details and options, see Section G - Clogging Indicators.) Model Codes Containing RED are non-stock items Minimum quantities may apply Contact HYDAC for information and availability F19
3 HIGH PRESSURE FILTERS Dimensions DFFX 330 / 660 TL 1.X Version [0.78] 1/2"-UNF-2Bx DP ± ±0.2 2" SAE Code 62 Flange 2 PL'S 1.75± ± Vent Plug [1.00] 3/4"-10UNC-2Bx25.3 DP Clogging Indicator Port DFFX 330: [.35] DFFX 660: 517 Drain Plug [4.53] 115 Clearance required for element removal F Size 330 TL1.0v 660 TL1.0v Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print.
4 Dimensions DFFX 330 / 660 TLL 1.X Version HIGH PRESSURE FILTERS " SAE Code 62 Flange 2 PL'S ± ± ± ±0.2 [1.00] 3/4"-10UNC-2Bx25.3 DP Clogging Indicator Port [13.64] DFFX 330: DFFX 660: [] 1/2"-UNFx DP 4 PL'S [4.53] 115 Clearance required for element removal Drain Plug Size 330 TLL1.0v 660 TLL1.0v Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. F21
5 HIGH PRESSURE FILTERS Dimensions DFFX 660 / 13 TL 2.X & 3.X Version 660 / 13 2.X Version [0.78] 1/2"-UNF-2Bx DP X FILTER HEAD SAME AS 2.X VERSION Vent plug [9.84] DFFX 660: 250 MIN [22.44] DFFX 13: 570 MIN Clearance required for element removal DFFX 660: 516 [32.99] DFFX 13: 838 Drain plug ± ± ± ± Vent plug 2" SAE Code 62 Flange 2 PL'S Clogging Indicator port.04 DFFX 660: 509 [32.72] DFFX 13: 831 [1.00] 3/4"-10UNC-2Bx25.3 DP Drain plug [13.78] DFFX 660: 350 MIN [26.38] DFFX 13: 670 MIN Clearance required for element removal F22 Size 660 TL2.0_3.0v 13 TL2.0_3.0v Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print.
6 Dimensions DFFX 660 / 13 TLL 2.X Version HIGH PRESSURE FILTERS 2" SAE Code 62 Flange 2 PL'S ± ± ± ±0.2 [1.00] 3/4"-10UNC-2Bx25.3 DP Clogging Indicator Port DFFX 660: 509 [32.72] DFFX 13: 831 [] 1/2"-UNFx DP 4 PL'S [13.78] DFFX 660: 350 [26.38] DFFX 13: 670 Clearance required for element removal Drain Plug Size 660 TLL2.0v 13 TLL2.0v Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. F23
7 HIGH PRESSURE FILTERS Sizing Information Total pressure loss through the filter is as follows: Assembly P = Housing P + Element P Housing Curve: Pressure loss through housing is as follows: Actual Specific Gravity Housing P = Housing Curve P x 0.86 Adjustments must be made for viscosity & specific gravity of the fluid to be used! (see Sizing HYDAC Filter Assemblies in Section B - Overview) DFFX 330 / 660 / 13 TL Housing DFFX 330 / 660 / 13 TLL Housing Forward Reverse Forward Reverse Flow in gpm Flow in gpm Element K Factors Actual Viscosity (SUS) x Actual Specific Gravity P Elements = Elements (K) Flow Factor x Flow Rate (gpm) x (From Tables Below) 141 SUS 0.86 Betamicron...D...BH4HC Elements (High Collapse) Size 3 µm 5 µm 10 µm µm 0330 D XXX BH4HC D XXX BH4HC D XXX BH4HC Optimicron D ON Elements Size 1 µm 3 µm 5 µm 10 µm 15 µm µm 0330 D XXX ON D XXX ON D XXX ON Wire Mesh D W/HC Elements Size 25, 50, 74, 100, 149, 0 µm 0330 D XXX W/HC D XXX W/HC D XXX W/HC Metal Fiber D V Elements (High Collapse) Size 3 µm 5 µm 10 µm µm 0330 D XXX V D XXX V D XXX V All Element K Factors in psi / gpm. F24
8 Notes HIGH PRESSURE FILTERS F25
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents
MEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
MEDIUM PRESSURE FILTERS MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol
MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol A B Features Eco-friendly, cost-effective alternative to spin-on filters Integrated retrofit protection Longer service life of the filter
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 45 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block
Duplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
HIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
HYDRAULIC AND LUBE OIL FILTERS RFM Series
HYDRAULIC AND LUBE OIL FILTERS RFM Series Low Pressure In-Tank Return Line Filters psi up to gpm Technical Details Mounting Method 7/9///8 mounting holes - filter housing Features The compact and lightweight
HIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
Low Pressure Filters
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 6-8 www.cmafh.com RFM Series In-Tank Return Line Filters Features The compact and lightweight design make
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
Low Pressure Filters
In-Tank Return Line Filters PSI up to GPM Hydraulic Symbol: INLET INLET Bypass Valve Pop-up Breather Bypass Valve Pop-up TANK OUTLET TANK OUTLET TANK OUTLET Features: The compact and lightweight design
NFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
Series RFL In-Line Filter
APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction
Series RFLD Duplex In-Line Filter
APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.
PRESSURE FILTERS FOR MODULAR STACKING. Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICATION PRODUCT FEATURES FILTER ELEMENTS
PRESSURE FILERS FOR MODULAR SACKING Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICAION DF...Z Pressure filters are designed for modular stacking and can be mounted directly to the component to
DF, DFF & DFFX Series Service and Parts
Filters DF, DFF & DFFX Series Service and Parts up to 528 gpm (2000 l/min), up to 6000 psi (420 bar) 1. Maintenance General Please follow the maintenance instructions. 1.2 Installation Before installing
MDF Series Service and Parts
Filters MDF Series Service and Parts up to 92 gpm (350 l/min), up to 4000 psi (280 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
Filters. DFP, DFPF Series. 2. Element Replacement. 2.1 Element Removal
Filters DFP, DFPF Series Manifold Mounted/Reverse Flow Option Service and Parts up to 158 gpm (600 l/min), up to 4500 psi (315 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions.
LF & LFF Series Service and Parts
Filters LF & LFF Series Service and Parts up to 174 GPM(660 l/min), up to 1500PSI(100bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
HFM Series Service and Parts
Filters HFM Series Service and Parts up to 37 gpm (140 l/min), up to 5800 psi (400 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
FILTER ELEMENTS. Overview of Elements PN# / / FIL
Overview of Elements C1 Overview of Elements Optimicron Elements ON - code designation Glass fiber, multi-layered with support Collapse rating - 29 psid (2 bar) 1, 3, 5, 1, 15, 2 micron Filtration Rating
LPF Series Service and Parts
Filters LPF Series Service and Parts up to 140 GPM(280 l/min), up to 1000PSI(50bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
SPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
DFDK Series Service and Parts
Filters DFDK Series Service and Parts up to 158 gpm (600 l/min), up to 4500 psi (315 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
Filters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information
142.9 INLET 1.38 35 OUTLET Index 1.25 31.8 1. General 1.4 Tools Required for Maintenance 1.5 Torque Requirements 2. Maintenance 3. Changing the Element 4. Spare Parts List 5. Replacement Element Model
Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel
Manifold Mounted, Rear Flanged Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 5 l/min Pressure range up to 35 bar Material: SG Iron/ADI, Steel . DESCRIPTION.. FILTER HOUSING
Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
Pressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
HPK04 Max Flow: 120 gpm (454 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high
Inline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.
Change-Over Inline Filter RFLD Cast Version Flow Rates up to 3 l/min* Pressure Range 25/4/64 bar With Ball Change-Over Valve * For higher flow rates, please refer to brochure RFLD Welded Version E 7.9.2/.4
Stainless Steel Pressure Filters
Stainless Steel Pressure Filters Inline Filters up to 26,000 PSIG up to 35 GPM Description Process Filtration MPSSF / HPSSF/ ACSSF Series The pressure filters consist of two main sections: the filter head
Return Line Filter RF
HYDAC return line filters type RF are designed to be mounted directly on tank tops. Inline mounting is also possible. Return Line Filter RF Flow rates up to 5, l/min Pressure range up to 25 bar Material:
FPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar 160 240 260 280 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international
FPK02 In-Line Cartridge Filters
HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features
HMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
RFL Cast Series Service and Parts
Filters RFL Cast Series Service and Parts up to 343 gpm (1300 l/min), up to 580 psi (40 bar) 1. Maintenance 1.5 Torque Values 2. Element Replacement 1.1 General Please follow the maintenance instructions.
Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
NF, NF UHE, NFD UHE & NF MMP with 2600 R element (for Ecomicronfit ( D) element version, see NF 1314/2614 Eco-Fit Series) Service and Parts
NF Series NF UHE, NFD UHE, & NF MMP refer to schematics below.. Maintenance. General Please follow the maintenance instructions.. Installation Before installing the filter into the system, check that the
LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar
RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
Filters. HF3P Series Places 60 b c x d DP 4 Places Flange
1/2"-20UNF x 17 2.36 4 Places 60 b 6.42 163 5.23 133 4.53 115 c x d DP 4 Places a 6.30 Filters 160 6.42 163 Flange 2.05 0.24 52 6 P Clogging HF3P Series Indicator Port G 1/2" Service and Parts 6.30 160
Change-Over Inline Filter RFLD Weld Version
Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed
Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
Change-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi
Return Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
Return Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
50P Series High Pressure Filters
P Series High Pressure Filters 1 P Series Applications for P series filters Automotive specified equipment Hydrostatic transmission circuits Servo and proportional controls Offshore drilling rigs Mining
Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing
Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing TABLE OF CONTENTS Page: MPSSF / HPSSFH / ACSSF Series.....2 VDHA Series...8 ACSSFH-1035...10 EDFR Series....12 EMLF Series....14
World Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
World Pressure Filters A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters 89 //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Filters. HF2P 79.4 Series Service and Parts. Index P Clogging. Indicator Port G 1/
2.05 52 3.39 86 0.24 6 0.84 21.4 P Clogging Filters Indicator Port G 1/2 4.02 102 3.13 HF2P 79.4 Series Service and Parts INLET OUTLET This symbol is followed 3.86 by user tips and particularly useful
10 Hydraulic Filters
1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins
DT-350 In-Line Hydraulic Filter
DT-35 In-Line Hydraulic Filter Features The DT-35 T-type ported series offers flows to 5 gpm with 3 bypass options and conforms to the HF3 automotive standard. Our standard bowl drain plug helps relieve
10 Hydraulic Filters
1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................
12S Series High Pressure Filters
High Pressure Filters 168 Applications - Offshore High pressure and aggressive environment - DI Water Water fogging - Food Processing Caustic washdown (poultry, etc.) - Test Stands High pressure Lightweight
World Pressure Filters A new standard in 7,000 psi pressure filters
World Pressure Filters A new standard in 7, psi pressure filters Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
Fluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts
Filters Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts up to 747 gpm (10400 l/min), up to 360 psi (5 bar) 1. Maintenance General Please follow the maintenance
Moduflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Filtrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
A complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHB series filters are designed for pressure line applications where manifold mounting is a specific requirement. The manifold type filters are designed to integrate onto manifold
Filters. RFD Series. Change-Over Return Line Filter Service and Parts. 2. Element Replacement. 2.1 Element Removal
1. Maintenance Filters Series Change-Over Return Line Filter Service and Parts up to 343 gpm (1300 l/min), up to 362 psi (420 bar) 1.1 General Please follow the maintenance instructions. 1.2 Installation
Filters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced
ø7 (ø177.8mm) Clearance Required for Element Removal HF4R-9 10 (254mm) HF4R-18 19 (487mm) HF4R-27 28 (711mm) 2.38 (60.4mm) 4.26 (108.1mm) Filters G 1/2 Indicator Port HF4R Series 1/8 NPT Indicator Port
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
Oil Solutions. GA/BGAH Series Medium Pressure Filters. Global Filtration Technology. Filtration.
Oil Solutions Medium Pressure Filters Filtration Global Filtration Technology www.oilsolutions.com.au Features/Applications for Medium Pressure Inline Filters GA Series Pressures to 750 PSI Flows to 100
Low & High Pressure ProGuard Filters
56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard
SPIN-ON FILTER - LOW PRESSURE LINE
SERIES MSH SPIN-ON FILTER - LOW PRESSURE LINE Maximum working pressure 5 psi Flow rate to 8 GPM D e s c r i p t i o n MSH working pressure of 5 psi, with a peak pressure This filter MSH series utilises
HY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
FSL HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
WITH P INDICATOR OPTION INDICATOR POSITION # INDICATOR POSITION # P3000G04=4.0" P3000G08=7.8"
D6 P3 SERIES WITH P OPTIO Flows Up To: Port Sizes: Max. Operating Pressure: Application: 3 GPM (114 L/MI) 1 1/16-12 U (SAE-12) 3, PSI (27 BAR) Inline Filtration, External Charge Pump Filtration, High Shock
12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
MPD Series Medium Pressure Filters
Medium Pressure Filters 113 Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping
Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi