Low Pressure Filters
|
|
- Roger Gerard Bates
- 6 years ago
- Views:
Transcription
1 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) RFM Series In-Tank Return Line Filters Features The compact and lightweight design make RFM filters especially suitable for mobile applications. RFM filters are constructed of polyamide plastic housing and lid. RFM 9///7 drop replacement for Tank Topper filters. alloy is water tolerant - anodization is not required for water based fluids (HWBF). The filter bowl on models 7-7 also serves as a contamination basket - removed to change element. Models,, 66, and 8 have filter elements equipped with separate, reusable contamination baskets. Cavities for clogging indicators are standard. NEW! s 7/9//6/8 available with - or -bolt tank flange. Applications Agricultural Automotive Construction Hydraulic Symbol A T Technical Details T Mounting Method 7/9//6/8 mounting holes - filter housing 7/9//6/8//7/ //66/8 mounting holes - filter housing Port Connections Inlet / Outlet 9/ 7/6/8 /7 / SAE- / SAE-6 /.6 Smooth Port SAE- / Open Bottom SAE- / NPT / SAE Flange, Code 6 / NPT / SAE Flange, Code 6 / G / BSPP 66/8 Direction of Flow Side inlet and bottom outlet. Mat. of Construc. Head Bowl Lid 9//7/6/8 /7 //66/8 Flow Capacity Housing Pressure Rating Max. Oper. Press: Proof Pressure: Fatigue Pressure: Burst Pressure: Steel gpm (7 lpm) gpm (9 lpm) gpm ( lpm) gpm (6 lpm) 9 gpm (8 lpm) gpm ( lpm) 7 gpm (7 lpm) 87 gpm ( lpm) gpm ( lpm) 7 gpm (66 lpm) gpm (8 lpm) Element Collapse Pressure Rating BN/HC, W/HC ECO/N, BN/AM, P/HC, AM V Fluid Temperature Range Fluid Compatability A T psi ( bar) 8 psi ( bar) psi ( million cycles 6- >8 psi ( bar) 66/8 6 psi (7 bar) 9 psid ( bar) psid ( bar) psid ( bar) - to F (- to C) Compatible with all petroleum oils and synthetic fluids rated for use with Fluoroelastomer or Ethylene Propylene seals. Contact HYDAC for information on special housing and element constructions available for use with water glycols, oil/water emulsions, and HWBF. Indicator Trip Pressure P = 9 psi ( bar) -% (standard) P = 7 psi ( bar) -% (optional) Bypass Valve Cracking Pressure ΔP = psid ( bar) +% (standard) ΔP = 87 psid (6 bar) +% (optional) 6 INNOVATIVE FLUID POWER
2 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Model Code RFM BN/HC B F F D. X / - V - - L. Filter Type RFM = In-Tank Return Line Filter Element Media BN/HC = Betamicron (Low Collaspe) (not for sizes 9 & ) ECO/N = ECOmicron (Low Collaspe) (not for sizes /7) BN/AM = Betamicron Aquamicron MM = Mobilemicron (Low Collaspe) AM = Aquamicron W/HC = Wire Screen 7, 9,, 6, 8,, 7,,, 66, 8 Working Pressure B = psid ( bar) Optional Second Inlet Connection (omit) = no second port F = / (SAE-) (sz. & only) K = / SAE Flange (code 6) (sz. & only) M = / SAE Flange (code 6) (sz. 66 & 8 only) V = x (SAE 6) (sz. & 7 only) Inlet Connection/Port ( Inlet) C = / (SAE-) (sz. 9 & only) K = / SAE Flange (code 6) (sz. & only) D = (SAE-6) (sz. 7, 6 & 8 only) M = / SAE Flange (code 6) (sz. 66 & 8 only) E = / (SAE-) (sz. & 7 only) Z = Customer Specific F = / (SAE-) (sz., 7,, & only) Filtration Rating (microns),,, = BNHC, ECO/N, = P/HC, = BN/AM, 7, 9 = W/HC = AM, = MM Type of Clogging Indicator A, B, BM, C, E, F, FD Type Number = no indicator, no ports - = clogging indicator positions (see chart) Modification Number (latest version always supplied) Inlet Port Configuration = SAE Straight Thread O-Ring Boss Ports (RFM 6-) 6 = SAE Code 6 Flange (sizes -8) Seals (omit) = Nitrile (NBR) (standard) V = Fluoroelastomer (FPM) Bypass (omit) = psid (standard) B6 KB = Bypass 87 psid (6 bar) = No Bypass not available with ECO/N Supplementary T = Filter Breather (RFM 7, 9,, 6, & 8 only) DTxx = Down tube (xx length in inches - up to inches) DSxx = Dip stick (xx length in inches) SOH = Modification of BNHC Elements for Phosphate Esters L = bolt (sizes 9-8) M = Indicator with Deutsch Connector (FD indicator only) Replacement Element Model Code R BNHC / V 7, 9,, 6, 8,, 7,,, 66, 8 Filtration Rating (micron),,, = BNHC, ECO/N, = P/HC, = BN/AM, 7, 9 = W/HC = AM, = MM Element Media BNHC, ECO/N, P/HC, BN/AM, W/HC, AM, MM Supplementary Details (omit) = standard V = Fluoroelastomer (FPM) seals Clogging Indicator Model Code VR B. X /. Indicator Prefix VR = Return Filters (sizes to 8) VMF = Mobile Filters (sizes 7 to 7) Trip Pressure = 9 psid ( bar) = 7 psid ( bar) (optional) Type of Indicator A = no indicator, plugged port B/BM = Visual pop-up (auto/manual reset) C = Electric switch E = Visual pressure gauge F = Electric pressure switch FD = Electric pressure switch w/deutsch Connector Modification Number Supplementary Details M = Deutsch Connector (male) Seals (omit) = Nitrile (NBR) (standard) V = Fluoroelastomer (FPM) (For additional details and options, see Clogging Indicators section.) Model Codes Containing RED are non-stock items Minimum quantities may apply Contact HYDAC for information and availability INNOVATIVE FLUID POWER 6
3 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Clogging Indicator Locations RFM 7/6/8 RFM 7/6/8/-L. 6.. RFM 9/ RFM /7. Plug RFM /. Plug. Standard RFM 9//-L. Standard. Plug. Standard RFM 66/8. Standard. Standard... Plug X.X.X.X 6.X.X.X.X.X Clogging Indicator left back Clogging Indicator right back.x Clogging Indicator left 9 to Inlet Clogging Indicator right 9 to Inlet.X Clogging Indicator on Top.X Clogging Indicator left back 9 to Inlet Clogging Indicator left back to Inlet 9 to Inlet 9 to Inlet Clogging Indicator left 9 to Inlet Clogging Indicator right 9 to Inlet.X Clogging Indicator on Top 6 INNOVATIVE FLUID POWER
4 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Dimensions RFM 7/6/8 RFM 9/.9 (8mm) RFM 7.8 (mm) RFM 6 8. (6mm) RFM 8.7 (7mm) Clearance Required RFM 7.7 (mm) G /8 (G /8 adapter supplied with indicator) RFM 7/6/8/-L Clearence for Element Removal RFM 7.9 (mm) RFM 6 9. (mm) RFM8.8.9 (mm) (8mm) RFM9.7 (mm) RFM 7.8 (mm) RFM 6 8. (6mm) RFM 8.7 (7mm) RFM 9. (69mm) ø.77 (ømm) RFM (8mm).9 (mm) ø.6 (mm) RFM 8.7 (9mm) /8 NPT Option OUTLET ø.9 (ø7.mm).8 (8mm). (mm) /6 - UN-B SAE-6 Port. (mm) INLET Tank Opening ø.7 (ø78mm) ø.89 (ø7.mm) Required Clearance.8" (7mm) RFM (7mm) RFM. (mm) RFM 7/6/8/-L Tank Opening ø.7 (78mm) ø.7 (6mm) ø.96 (6mm) RFM 9//-L ø. (8.mm) Tank Opening ø. (6mm) RFM (mm) RFM. (8mm) Hose Barb (mm)." (7mm) G /8 (G /8 adapter supplied with indicator) Weight (lbs.) " (mm). (9mm) ø. (9mm) Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print. RFM 7/6/8 w/ oil separator. (8.mm) RFM 7/6/8. (mm) Clearance for Element Removal.8 (6mm).6 + (6 + mm) RFM (6mm) RFM.9 (9mm) RFM 7/6/8 w/out oil separator.89 (7.mm) RFM 9//-L. (79mm) RFM (67mm) RFM 9.8 (mm) Tank Opening ø. (ø6mm) RFM 9/. (9mm) OUTLET RFM 9/. (6mm) RFM 7/6/8.7 (mm) RFM 9/. (8.mm). -. (6. -. mm) ø.6 (ø6mm) INLET. (mm) INNOVATIVE FLUID POWER 6
5 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) RFM 66/8 Dimensions RFM /7 RFM / Required Clearance.78" (96mm) RFM 9.9 (mm) RFM 7. (8mm) RFM.8 (mm) RFM (mm) open bottom Ø.9" (mm) G /8 (G /8 adapter supplied with indicator).8" (mm) Indicator Port G /".96 (6mm).6 (mm) RFM 66.8 (mm) RFM 8. (8mm) Clearance for Element Removal RFM 66.9 (mm) RFM 8 6. (mm) 7.87 (mm) Threaded Outlet G / ø 6. (6mm) Weight (lbs.) Dimensions shown are for general information and overall envelope size only. Weights listed are without element. For complete dimensions please contact HYDAC to request a certified print. INNOVATIVE FLUID POWER Clearance Required Indicator Port G / RFM. (6mm) RFM. (8mm) 6. (mm).86 (98mm).88 (8mm) RFM 6.77 (7mm) RFM 9.96 (mm) RFM /7 6.7 (7mm) RFM /7. (.6mm) RFM / 6.97 (77mm) Threaded Outlet NPT ø.8 (mm) RFM /.88 (mm) RFM 66/ (mm) RFM 66/8 6.7 (67mm) RFM /7//. (mm) RFM 66/8. (.mm)
6 Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) Sizing Information Element K Factors Total pressure loss through the filter is as follows: Assembly ΔP = Housing ΔP + Element ΔP Housing Curve: Pressure loss through housing is as follows: Actual Specific Gravity Housing ΔP = Housing Curve ΔP x.86 Adjustments must be made for viscosity & specific gravity of the fluid to be used! (see sizing section on page 9) RFM 9/ & RFM 9//-L Housing RFM 7/6/8 & RFM 7/6/8/-L Housing RFM / 7 Housing RFM / Housing 7 Actual Viscosity (SUS) x Actual Specific Gravity ΔP Elements = Elements (K) Flow Factor x Flow Rate (gpm) x (From Tables Below) SUS.86...R...BNHC (Betamicron Low Collapse) μm μm μm μm R W/HC (Wire Screen),, 7,, 9, μm All Element K Factors in psi / gpm R MM μm μm R...P/HC (Paper), μm RFM 66/8Housing R AM A R ECO/N (ECOmicron ) μm μm μm μm R...BN/AM μm μm INNOVATIVE FLUID POWER 66
HYDRAULIC AND LUBE OIL FILTERS RFM Series
HYDRAULIC AND LUBE OIL FILTERS RFM Series Low Pressure In-Tank Return Line Filters psi up to gpm Technical Details Mounting Method 7/9///8 mounting holes - filter housing Features The compact and lightweight
More informationLow Pressure Filters
In-Tank Return Line Filters PSI up to GPM Hydraulic Symbol: INLET INLET Bypass Valve Pop-up Breather Bypass Valve Pop-up TANK OUTLET TANK OUTLET TANK OUTLET Features: The compact and lightweight design
More informationLOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
More informationLOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
More informationMEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
More informationMEDIUM PRESSURE FILTERS MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol
MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol A B Features Eco-friendly, cost-effective alternative to spin-on filters Integrated retrofit protection Longer service life of the filter
More informationHIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported
More informationHIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm
HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS
More informationHIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents
More informationSeries RFL In-Line Filter
APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 45 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold
More informationDuplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
More informationSeries RFLD Duplex In-Line Filter
APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block
More informationHIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
More informationNFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
More informationReturn Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationReturn Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationSPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
More informationNFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
More informationFILTER ELEMENTS. Overview of Elements PN# / / FIL
Overview of Elements C1 Overview of Elements Optimicron Elements ON - code designation Glass fiber, multi-layered with support Collapse rating - 29 psid (2 bar) 1, 3, 5, 1, 15, 2 micron Filtration Rating
More informationInline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
More informationStainless Steel Pressure Filters Housings, Elements, Indicators & Sizing
Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing TABLE OF CONTENTS Page: MPSSF / HPSSFH / ACSSF Series.....2 VDHA Series...8 ACSSFH-1035...10 EDFR Series....12 EMLF Series....14
More informationReturn Line Filter RF
HYDAC return line filters type RF are designed to be mounted directly on tank tops. Inline mounting is also possible. Return Line Filter RF Flow rates up to 5, l/min Pressure range up to 25 bar Material:
More informationStainless Steel Pressure Filters
Stainless Steel Pressure Filters Inline Filters up to 26,000 PSIG up to 35 GPM Description Process Filtration MPSSF / HPSSF/ ACSSF Series The pressure filters consist of two main sections: the filter head
More informationPRESSURE FILTERS FOR MODULAR STACKING. Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICATION PRODUCT FEATURES FILTER ELEMENTS
PRESSURE FILERS FOR MODULAR SACKING Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICAION DF...Z Pressure filters are designed for modular stacking and can be mounted directly to the component to
More informationReturn Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
More informationInline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationInline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.
Change-Over Inline Filter RFLD Cast Version Flow Rates up to 3 l/min* Pressure Range 25/4/64 bar With Ball Change-Over Valve * For higher flow rates, please refer to brochure RFLD Welded Version E 7.9.2/.4
More informationInline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar
RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,
More informationChange-Over Inline Filter RFLD Weld Version
Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationOFFLINE FILTRATION SYSTEMS
Offline Filtration Systems Today s hydraulic filter systems have seen a shift from reactionary to preventative, and even predictive maintenance. Total system contamination management begins with our Fluid
More informationChange-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationReturn Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
More informationPressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel
Manifold Mounted, Rear Flanged Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 5 l/min Pressure range up to 35 bar Material: SG Iron/ADI, Steel . DESCRIPTION.. FILTER HOUSING
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationPressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
More informationHPK04 Max Flow: 120 gpm (454 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high
More informationPressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationWorld Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
More informationInline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
More informationReturn Line Filter RFM with 2-Hole Mounting
Return Line Filter RFM with 2-Hole Mounting Tank-top versions: up to 200 l/min, up to 10 bar RFM 75 RFM 90 RFM 150 RFM 165 RFM 185 In-tank versions: up to 2,600 l/min, up to 10 bar RFM S RFM KIT RFM SET
More informationHMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
More informationWorld Pressure Filters A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationLF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi
More informationLF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
More informationWorld Pressure Filters A new standard in 7,000 psi pressure filters
World Pressure Filters A new standard in 7, psi pressure filters Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More informationLS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm
Suction Filters LS 025 LS 035 In-line mounting Connection up to G¾ / -2 SAE Nominal flow rate up to 33 l/min / 8.7 gpm Description Application To be installed in the suction line of the pumps of hydraulic
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................
More informationInline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar 160 240 260 280 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international
More information15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters 89 //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment
More informationFilters. RFD Series. Change-Over Return Line Filter Service and Parts. 2. Element Replacement. 2.1 Element Removal
1. Maintenance Filters Series Change-Over Return Line Filter Service and Parts up to 343 gpm (1300 l/min), up to 362 psi (420 bar) 1.1 General Please follow the maintenance instructions. 1.2 Installation
More informationRFL Cast Series Service and Parts
Filters RFL Cast Series Service and Parts up to 343 gpm (1300 l/min), up to 580 psi (40 bar) 1. Maintenance 1.5 Torque Values 2. Element Replacement 1.1 General Please follow the maintenance instructions.
More informationPressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
More information12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-in filtration.
12CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The 12CS Series features a
More informationOVERVIEW OF RESERVOIR ACCESSORIES
OVERVIEW OF RESERVOIR ACCESSORIES Reservoir Accessories The reservoir of a hydraulic system can be a significant source of contamination. At the same time, the reservoir is an ideal location for correcting
More informationFilter Elements. for use in HYDAC filters* Pressure filter. Pressure filter. filter element (DIN 24550) elements. long seam weld
1. TECHNiCAL SPECIFICATIONS 1.1 Construction As the core of the, it is the element which performs the actual filtration and/or dewatering function in the housing. They consist of several pleated filtration
More informationFPK02 In-Line Cartridge Filters
HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins
More informationFPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
More informationLow & High Pressure ProGuard Filters
56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard
More informationDuplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts
Filters Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts up to 747 gpm (10400 l/min), up to 360 psi (5 bar) 1. Maintenance General Please follow the maintenance
More informationCUSTOM CLAMPS. Head Bolt Arrangements. Model Code B3-5 A1 B1 A1HB B1HB S1 HRSGBLPU 30 A1 373 ST
Head Bolt Arrangements CUSTOM CLAMPS A1 B1 A1HB B1HB S1 Parts Legend 1 Hex Head Bolt 2 Socket Head Bolt 3 Steel Band 4 Band Profile 5 Swivel Sleeve 6 Hex Head Nut 7 H-Bolt 8 Locking Sleeve Series HRGBLPU
More informationPT Series Tank Top Filters
Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.
More informationBe sure to order the correct number of elements: OLF 15 = 1, OLF 30 = 2, OLF 45 = 3, OLF 60 = 4
Replacement Elements OLF Offline Filters Model Code Micron Rating Media Type Part No. N15DM002 2 Dimicron 01251590 N15DM010 10 Dimicron 03115180 N15DM020 20 Dimicron 00349576 N15DM030 30 Dimicron 03048790
More information15/40/80CN Series. Medium Pressure Filters
//8CN Series Medium Pressure Filters 7 //8CN Series Applications for CN series Filters Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile
More informationJ Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
More informationSuction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationFilters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced
ø7 (ø177.8mm) Clearance Required for Element Removal HF4R-9 10 (254mm) HF4R-18 19 (487mm) HF4R-27 28 (711mm) 2.38 (60.4mm) 4.26 (108.1mm) Filters G 1/2 Indicator Port HF4R Series 1/8 NPT Indicator Port
More informationLPF Series Service and Parts
Filters LPF Series Service and Parts up to 140 GPM(280 l/min), up to 1000PSI(50bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
More information12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationLow Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
More information12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The features a Parker, re-usable coreless
More informationRETURN FILTERS. MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RB MATERIALS Head: Aluminium alloy Cover & bowl: Polyammide Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2) Max working: 0 kpa
More informationNF, NF UHE, NFD UHE & NF MMP with 2600 R element (for Ecomicronfit ( D) element version, see NF 1314/2614 Eco-Fit Series) Service and Parts
NF Series NF UHE, NFD UHE, & NF MMP refer to schematics below.. Maintenance. General Please follow the maintenance instructions.. Installation Before installing the filter into the system, check that the
More informationFILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
More informationMPD Series Medium Pressure Filters
Medium Pressure Filters 113 Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping
More informationRETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
More informationRF4 Series. Return Line Filters
RF Series Return Line Filters 7 RF Series Applications for RF Filters Mobile Equipment Mining Equipment Industrial Power Units Automotive Specified Equipment The RF is a rugged, industry proven filter
More informationPRESSURE FILTERS. BYPASS VALVE Setting: 170 kpa (1,7 bar) ± 10% WORKING TEMPERATURE From -25 to +110 C
COMPONENTS MATERIALS Head: Aluminium alloy Spinon cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile (FKM on request fluoroelastomer) Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO
More informationDT-350 In-Line Hydraulic Filter
DT-35 In-Line Hydraulic Filter Features The DT-35 T-type ported series offers flows to 5 gpm with 3 bypass options and conforms to the HF3 automotive standard. Our standard bowl drain plug helps relieve
More informationReturn line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationTank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 1000 according to DIN 24550 1. Features
More informationFilters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information
142.9 INLET 1.38 35 OUTLET Index 1.25 31.8 1. General 1.4 Tools Required for Maintenance 1.5 Torque Requirements 2. Maintenance 3. Changing the Element 4. Spare Parts List 5. Replacement Element Model
More informationCFU. Compact Filter Unit. hyprofiltration.com/cfu
CFU Compact Filter Unit Bigger isn t always better. The Compact Filter Unit provides you with the best filtration at a size you can take anywhere. Tried and true, the CFU is the ultimate filtration system
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More information