FILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW

Transcription

1 FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF THE FILTER ELENT

2 FILTERS HYDRAULIC DIVISION SD MATERIALS Cover & housing Bypass valve Seals Indicator housing COMPATIBILITY Anodized aluminium alloy Polyammide Nitrile NBR (FKM - on request fluoroelastomer) Brass Full with fluids: HH-HL-HM-HR-HV-HG (according to ISO 6743/4). For fluids different than the above mentioned, please contact our Sales Department. PRESSURE 6 R A/F 3 mm Indicator port Collapse, differential for the filter element BYPASS VALVE Setting 145 (1 bar) 5 (.35 bar) +/-1% H1 H7 H2 H4 D1 D 3 H5 H6 H3 WORKING TEMPERATURE From -15 to +23 F E1 D5 D4 9 D2 D1 D2 D3 D4 D5 E1 H1 H2 H3 H4 H5 H6 H7 R Weight Ibs FRD 11 1/ FRD 21 3/ FRD FRD / FRD / FRD / = = Tank cut out = D3 + 1mm.

3 ORDERING AND OPTION CHART S D F FILTER COMPLETE FAMILY NOMINAL SIZE & LENGTH ELENT FAMILY SIZE & LENGTH E S D PORT TYPE B = BSP thread N = NPT thread S = SAE thread F = SAE flange 3, metric screws D = SAE flange 3, UNC screws PORT SIZE 4 = 1/2" 6 = 3/4" 8 = 1" 12 = 1" 1/2 2 = 2" 1/2 28 = 3" 1/2 BYPASS VALVE W = without A = 5 (,35 bar) SEALS N = nitrile NBR F = FKM Fluoroelastomer FILTER DIA = metal wire mesh 6 = metal wire mesh 9 = metal wire mesh 25 CLOGGING INDICATOR 8 = 1/8" seat, plugged 11 = vacuum gauge, bottom connection 9 = vacuum switch, N.O. contacts = SPTD, vacuum switch = vacuum switch, N.C. contacts X ACCESSORIES X = no accessory available SEALS N = NBR F = FKM FILTER DIA = w. mesh 6 = w. mesh 9 = w. mesh 25 CLOGGING INDICATORS 1. ø 1.57 A/F 24 mm 3.22 PG9 A/F 27 mm A/F12 mm 1/8 BSP 1/8 Ø / Series 11: vacuum gauge Series 9 (N.O. contacts) Series 92 (N.C. contacts) vacuum switch - max voltage 22V ca 5-6 Hz max current.5a resistive,.25a inductive switching power 1VA, setting 4.4 (.3 bar) Series 91: SPDT, vacuum switch max voltage 25V - 5Hz max current 6A resistive,1a inductive protection IP65 setting 2.9 (.2 bar)

4 PRESSURE DROP ( p) CURVES The Assembly Pressure Drop ( p) is obtained by adding the pressure drop values of the Filter Housing and of the Clean Filter Element corresponding to the FILTER HOUSING PRESSURE DROP (mainly depending on the port size) considered Flow Rate and it must be lower than.4 (.3 bar) /2" 3/4" FSD " /2" FSD /2" 3 1/2" CLEAN FILTER ELENT PRESSURE DROP (depending both on the internal diameter of the element and on the filter media) ESD ESD ESD ESD ESD ESD N.B. All the curves have been obtained with mineral oil having a kinematic viscosity 3 cst and specific gravity.9 ; for fluids with different features, please consider the factors described in the first part of this catalogue When selecting the filter size, these curves must be taken into account if it is foreseen that any flow peak is to be absorbed by the bypass valve, it also BYPASS VALVE PRESSURE DROP must be of proper configuration to avoid pressure peaks. The valve pressure drop is directly proportional to fluid specific gravity..6 FSD 11.6 FSD FSD 41.6 FSD N.B. All the curves are obtained from test done at the UFI HYDRAULIC DIVISION Laboratory, according to the specification ISO In case of discrepancy, please check the contamination level, viscosity and features of the fluid in use.

5 CROSS FUNCTIONAL VIEW STRONG CONSTRUCTION The strong filter housing makes the FSD filters particularly suitable for applications where each component must provide the highest reliability. CLOGGING INDICATOR A visual or electrical indicator allows monitoring of the element condition, and gives an indication of the proper time for replacement. The port for the indicator is a standard feature. FLEXIBILITY OF ASSEMBLING A second inlet port, supplied plugged, permits you to easily solve special installation needs. NO LEAKS The end caps with captive O-ring ensure a perfect sealing between filter element and housing. SPARE PARTS ORDERING INFORMATION (from the code of the complete filter, fill the digits corresponding to the boxes) C Filter housing B S D XX X Cover S S D X X X X X XX Head S S D X XXXXX Seal kit S S D X X X X X XXXXX A B B A DINSIONS OF THE FILTER ELENTS Type ERD 11 ERD 21 ERD 31 ERD 41 ERD 51 ERD 61 A B C / / Area (in 2 ) Media M Technical data subject to variations without prior notice.sd - USA - 7/25 UFI Universal Filter International - Hydraulic Division: 9337 Ravenna Road, Unit G - Twinsburg, OH 4487 Phone (33) Fax (33) ufifilters@uhiltd.com UFI HYDRAULIC DIVISION - PLANET FILTERS S.p.A. via S.Chierico, Bolgare BG - Tel Fax info@ufifilter.it -