The Complete Range of Fluid Power Products

Transcription

1 The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP)

2 lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd. started its Fluid Power ivision with the manufacture of pneumatic valves in 97. From pneumatic valves, it progressed into making pneumatic cylinders, hydraulic cylinders and hydraulic power units in the following years. The ivision has been designing and manufacturing valves and cylinders for more than 40 years for 4x7 application in different industry sectors like automotive, chemical, steel, pharmaceutical, foundry, machine tool, plastics, textile, packaging, mobile and general engineering. esides standard products, tailored products are also made to meet customer-specific applications. The proven designs, ruggedness and stringent testing cycles result in reliable, trouble-free and consistent operations, even in the harshest of environments. The product range encompasses: Pneumatic Valves Pneumatic ylinders ir-line ccessories ydraulic ylinders ydraulic Power Packs and Systems Pneumatic Valves, -way, -position (Solenoid / pilot operated) / In-line direct acting, diaphragm type and pilot piston actuated valves Suitable for air, water and low pressure oil media Port sizes up to G 4 ubble tight shut off, quick response to actuation ounts in any position ontinuous duty cycle coil aterial: ody- brass/gunmetal, over- aluminium/brass, Seals- nitrile Options: / N, NO in solenoid and pilot version, uto drain valve Specials: igh pressure / valve up to 8 bar pplication: rain and dispensing / N Solenoid / NO Solenoid / N xternal Pilot / NO xternal Pilot (- Inlet, - Outlet) irect acting Port Size Orifice Pressure Flow aterial Weight Part ode SP dia psi lpm kg Normally closed Normally open *G /8 / l 0. PVS08GRN PVS08GRNO *G /4 / l 0. PVS04GRN PVS04GRNO G / 3/ G 0.4 PVS0GRGN G 3/4 3/ G 0.5 PVS034GRGN G 3/ G 0.6 PVS00GRGN G /4 5/ G.4 PVS4GRGN G / 5/ G.5 PVSGRGN * 3/ N and NO versions are also available in G /8 and G /4 sizes iaphragm type SP dia psi lpm aterial kg Normally closed Normally open G / / rass 0.9 PVS0GPIN PVS0GPINO G 3/ rass. PVS034GPIN PVS034GPINO G rass. PVS00GPIN PVS00GPINO Solenoid- external pilot operated SP dia psi lpm aterial kg Normally closed Normally open G / 3/ G 0.4 PVS0GRGN PVS0GRGNO G 3/4 / G 0.5 PVS034GRGN PVS034GRGNO G 5/ G 0.6 PVS00GRGN PVS00GRGNO G /4 3/ G.4 PVS4GRGN PVS4GRGNO G / 7/ G.5 PVSGRGN PVSGRGNO G 3/ G.3 PVS00GRGN PVS00GRGNO Pilot pressure Inlet pressure For pilot-operated valve, put P instead of S in Part ode Fluid Power Products 3

3 Pneumatic Valves, 3-and 4-way, -position (Solenoid / pilot operated) 5/, 3/ NO and N high flow capacity poppet valve Sturdy and reliable poppet design Port sizes up to G / Low power solenoid with a range of / voltages Speed up to 600 cycles/min, life up to 0 million cycles anual override as a standard feature aterial: ody, Piston, ousing- aluminium, Seals- nitrile Options: 3/ NO, N and 5/ valve in solenoid and pilot version pplication: Single-acting and double-acting cylinders 5/ Single Solenoid 5/ Single Pilot 5/ ouble Solenoid 5/ ouble Pilot Pneumatic Valves, 4-way, 3-position (Solenoid / pilot operated) 5/3 Solenoid and pilot actuated high flow capacity poppet valve Sturdy and reliable poppet design Port sizes up to G / Low power solenoid with a range of / voltages Speed up to 600 cycles/min, life up to 0 million cycles anual override as a standard feature aterial: ody, Piston, ousing- aluminium, Seals- nitrile Options: PN and PRN type in solenoid and pilot version pplication: ouble-acting cylinders and control valves PN Solenoid PRN Solenoid PN Pilot PRN Pilot way (3/) (-Inlet,,4- Outlet, 3,5- xhaust) Port Size Orifice Pressure Flow aterial Weight Part ode (solenoid opt.) SP dia psi lpm kg Normally closed Normally open G /4 /4" l 0.3 PVS304GPPIN PVS304GPPINO G 3/8 3/8'' l 0.7 PVS3038GPPIN PVS3038GPPINO G / /'' l 0.7 PVS30GPPIN PVS30GPPINO G 3/4 3/4'' l PVS3034GPPIN PVS3034GPPINO G '' l.8 PVS300GPPIN PVS300GPPINO G /4 /4'' l PVS34GPPN PVS34GPPNO G / /'' l 4.4 PVS3GPPN PVS3GPPNO 4-way (5/) SP dia psi lpm aterial SS S Single solenoid ouble solenoid * G /4 3/6" l PVS404GS--- PVS404G--- G 3/8 3/8'' l.3.3 PVS4038GS--- PVS4038G--- G / /'' l..3 PVS40GS--- PVS40G--- G 3/4 3/4'' l.. PVS4034GS--- PVS4034G--- G '' l PVS400GS--- PVS400G--- G /4 /4'' l PVS44GS--- PVS44G--- G / /'' l PVS4GS--- PVS4G--- * G /4-5/ valve is spool type design; SS= single solenoid; S= double solenoid Solenoid operated (5/3) (-Inlet,,4- Outlet, 3,5- xhaust) Port Size Orifice Pressure Flow aterial Weight, kg Part ode SP dia psi lpm PN PRN PN PRN G /4 /4" l PVS404G3PN PVS404G3PRN G 3/8 3/8" l.3.4 PVS4038G3PN PVS4038G3PRN G / /" l.9.4 PVS40G3PN PVS40G3PRN G 3/4 3/4" l.9.4 PVS4034G3PN PVS4034G3PRN G " l PVS400G3PN PVS400G3PRN G /4 /4" l 4. 4 PVS44G3PN PVS44G3PRN G / /" l PVS4G3PN PVS4G3PRN Pilot operated (5/3) SP dia psi lpm aterial PN PRN PN PRN G /4 /4" l PVPO04G43PN PVPO04G43PRN G 3/8 3/8" l..3 PVPO038G43PN PVPO038G43PRN G / /" l.8.4 PVPO0G43PN PVPO0G43PRN G 3/4 3/4" l.8.3 PVPO034G43PN PVPO034G43PRN G " l PVPO00G43PN PVPO00G43PRN G /4 /4" l 4 4 PVPO4G43PN PVPO4G43PRN G / /" l PVPOG43PN PVPOG43PRN Pilot pressure Inlet pressure For pilot-operated valve, put P instead of S in Part ode Pilot pressure Inlet pressure 4 Fluid Power Products Fluid Power Products 5

4 Pneumatic Valves, stackable series 5/, 5/3 Solenoid actuated stackable type poppet valve Internal/external pilot operated poppet design Streamlined construction for gang manifold ompact size with high flow, improves system appearance and performance ounts in any position ontinuous duty cycle coil aterial: ody, Piston, ousing- aluminium, Seals- nitrile Options: 3/, 5/ and 5/3 types in all sizes Pneumatic Valves, compact series 5/ Solenoid and pilot actuated spool type compact valve Sleek aesthetics with spool type design igh performance from proven design ir spring assisted design for faster response time Low power solenoid and manual override as a standard feature G /4 inlet and cylinder ports Facility of gang manifolding Options: G /8 inlet and cylinder ports, springreturn mushroom button and detent type selector switch, single pilot and double pilot 5/ Single Solenoid 5/ ouble Solenoid 5/3 PN Solenoid 5/3 PRN Solenoid / Single Solenoid 5/ ouble Solenoid 5/ Single Pilot 5/ Selector Switch Port Size Orifice Pressure Flow aterial Weight Part ode SP dia psi lpm kg Normally closed Normally open G /8 /8" l 0. PVSS308GPPIN PVSS308GPPINO G /4 /4'' l 0.4 PVSS304GPPIN PVSS304GPPINO G 3/8 3/8'' l. PVSS3038GPPIN PVSS3038GPPINO G / /'' l. PVSS30GPPIN PVSS30GPPINO SP dia psi lpm aterial SS S Single solenoid ouble solenoid G /8 /8" l PVSS408GS--- PVSS408G--- G /4 /4'' l PVSS404GS--- PVSS404G--- G 3/8 3/8'' l.7.8 PVSS4038GS--- PVSS4038G--- G / /'' l.7.8 PVSS40GS--- PVSS40G--- SS= single solenoid, S= double solenoid SP dia psi lpm aterial kg PN PRN G /8 / l 0. PVSS408G3PN PVSS408G3PRN G /4 / l 0.5 PVSS404G3PN PVSS404G3PRN G 3/8 3/ l.8 PVSS4038G3PN PVSS4038G3PRN G / / l.8 PVSS40G3PN PVSS40G3PRN (- Inlet,,4- Outlet, 3,5- xhaust) (- Inlet,,4- Outlet, 3,5- xhaust) 3-way (3/) 4-way (5/) 4-way (5/) 4-way (5/3) Port Size Orifice Pressure Flow aterial Weight Type Part ode SP dia psi lpm kg G /8 5 mm l 0.3 Single Solenoid PVS408GS--- G /8 5 mm l 0.45 ouble Solenoid PVS408G--- G /8 5 mm l 0.3 Single pilot FPVPO08G4S--- G /8 5 mm l 0.4 ouble Pilot FPVPO08G4--- G /8 5 mm l 0.5 Selector Switch FPVSW08G4S--- G /8 5 mm l 0.5 ushroom button FPV08G4S--- G /4 6 mm l 0.3 Single Solenoid PVS404GS--- G /4 6 mm l 0.45 ouble Solenoid PVS404G--- G /4 6 mm l 0.3 Single pilot FPVPO04G4S--- G /4 6 mm l 0.4 ouble Pilot FPVPO04G4--- G /4 6 mm l 0.5 Selector Switch FPVSW04G4S--- G /4 6 mm l 0.5 ushroom button FPV04G4S--- 6 Fluid Power Products Fluid Power Products 7

5 Pneumatic Valves, manually operated /, 3/, 4/, 4/3 anually actuated valves Robust design with proven performance ounting provision for individual unit Very light operating forces Normally open and normally closed models aterial: ody, Piston- aluminium/brass, Seals- nitrile Options: / NO and N version in roller and foot pedal Pneumatic Valves, dual sensing Optimum poppet technology for high shift consistency igh flow and dirt tolerant Valves supplied with switch reactor pplication: Used as safety valve in power presses and for clutch/brake controls 4/ and Rotary 4/3 and Rotary 5/ and Lever 3/ Roller Operated (- Inlet,,4- Outlet, 3,5- xhaust) and rotary valve (4/ and 4/3) Port Size Orifice Pressure Flow aterial Weight kg Part ode SP dia psi lpm 4/ 4/3 4/ 4/3 PN G /4 / l.3.6 PVO04G4RL--- PVO04G4RL3PN G 3/8 3/ l.3.6 PVO038G4RL--- PVO038G4RL3PN G / 3/ l.3 3 PVO0G4RL--- PVO0G4RL3PN G 3/4 /" l 3 PVO034G4RL3PN G l 6 PVO00G4RL3PN G / / l 5 PVOG4RL3PN Roller operated valve (3/) SP dia psi lpm aterial kg Normally closed Normally open G /4 / l 0.3 PVO04G3RLR-N- PVO04G3RLR-NO- G 3/8 3/ l 0.5 PVO038G3RLR-N- PVO038G3RLR-NO- G / / l 0.9 PVO0G3RLR-N- PVO0G3RLR-NO- G 3/4 3/ l 0.9 PVO034G3RLR-N- PVO034G3RLR-NO- * / NO and N versions available 3/ N onnected Valve 3 (- Inlet, - Outlet, 3- xhaust) Port Size Orifice Pressure Flow aterial Weight SP dia psi lpm kg Part ode G / /'' l.5 PVS30GSIN G 3/4 3/4" l 3.9 PVS3034GSIN G " l 4 PVS300GSIN G / /" l 9 PVS3GSIN Foot pedal valve (3/) SP dia psi lpm aterial kg Normally closed Normally open G /4 / l PVO04G3FTP-N- PVO04G3FTP-NO- G 3/8 3/ l PVO038G3FTP-N- PVO038G3FTP-NO- * / NO and N versions available and lever valve (5/ and 5/3 ) SP dia psi lpm aterial kg 5/ 5/3PN G /4 / l 0.7 PVO04GLR--- PVO04G4LR3PN 8 Fluid Power Products Fluid Power Products 9

6 Pneumatic Valves, PT blow moulding Specially designed for PT blow moulding machines Sturdy and reliable poppet design, external pilot operated Quick response to actuation igh pressure / valve up to 40 bar ontinuous duty cycle coil igh flow rate blowing with shortest exhaust function Simple in maintenance and service friendly Suitable up to 5 litres, depending on cycle time vailable with base suitable for up to 6 valves aterial: ody, over- al anodised, Piston: delrin, Piston seal: PU, O ring: NR Standard Pneumatic ylinders ylinders with cast iron end covers and Round profile.s. hard chrome plated tube xtremely rugged and heavy duty Ideal for use in tough industrial environments Large range of bore sizes and mountings Stroke length offered up to 3000 mm Up to 0 ton load capacity Options: ellows, viton seals, hollow shaft, rod extension and rod threading Specials: Single-acting, stroke adjustable, double-ended, duplex and large port Function P Pre-lowing P igh Pressure lowing PX xhaust Type / Way, Piston pilot / Way, Piston pilot / Way, Piston pilot Switching function Normally closed Normally closed Normally open Pilot valves 3/ NO 3/ NO 3/ N Orifice mm 6 mm mm Port size / SP 3/4 SP /4 SP Operating pressure to 6 bar 3 to 40 bar to 40 bar xternal pilot pressure 6 to 8 bar Preblow Inlet xt. Pilot Pressure Outlet avity.p.low Inlet Ø8.5 (4 OLS) Ø8.5 (4 OLS) 44 0 xhaust Pilot Pressure (P) Out put blowing Pilot Pressure (P) Silencer xhaust P P PX Pilot Pressure (PX) Non-ushion ushion Stroke djustable ouble-nded 0 Fluid Power Products Fluid Power Products ore sizes edium 5, 40, 50, 65, 75, 00, 5, 50, 00, 50, 300, 350 mm ompressed air (filtered and lubricated) esign Piston cylinder with cushion/non-cushion version Pressure range 7 to 50 psi (0.5 to 0 bar) Temperature range -0 to 60, up to 50 with viton seals onstruction nd covers- cast iron, Tube- mild steel seamless honed and hard chrome plated, Piston rod- N-8 hard chrome plated, stainless steel (optional), Piston- cast iron/aluminium, ountings- mild steel/ cast iron, Seals- NR Ordering code S FP S 50 I 050 X X X Standard Pressure 50 psi ountings Front flange G Foot Rear flange I Stud Rear eye Neck Rear trunnion asic Intermediate trunnion F entre trunnion ushion Non-cushion ore size Ram size I L N 58.4 Stroke Type Stroke adjustable ouble ended 3 Large port 4 uplex 5 Single acting Type (SW) etric thread Female inches 3 Female metric 4 ollow male 5 ollow female 6 Viton seal Type 3 9 Rod extension 0 Special

7 L L L 4 TI ROS T P Ø P SW imensions (ll dimensions in mm) Ø - 4 NOS - 4 NOS STRO + STRO + STRO + SW asic ore * F G /8 G /4 G /4 G /4 G /4 G 3/8 G / G / G 3/4 G 3/4 G 3/4 G 3/6 /4 /4 /4 3/8 3/8 / / 3/4 3/4 L P 8 / / / / 3/4 /4 / 3/4 3/4 * Stroke length above 000 mm offered with stop tube Front and rear flange mounting ore F Rear trunnion and rear eye mounting ore F Foot and centre trunnion mounting ore F L ustomer to specify ylinder accessories Rod fork ore Fluid Power Products Fluid Power Products SQ T X STRO + X inge mounting + STRO STRO + X STRO + Ø T Ø- 4 NOS ouble-ended and stroke adjustable cylinder Standard pneumatic cylinder ore F /" SW 50, /" SW /" SW /4" SW 5, " SW /4" SW /" SW 300, /4" SW Standard pneumatic cylinder ore F

8 ISO Pneumatic ylinders (Series ) ylinders with nylon end covers, nylon piston and ickey ouse profile aluminum tube Light weight with high strength imensions as per ISO 643 Stroke length offered up to 500 mm Fully adjustable cushioning at both ends Options: ellows, hollow shaft, rod extension and rod threading Specials: Reed switch, single-acting, stroke adjustable, double-ended and duplex Ideal for use in most demanding automation applications imensions (ll dimensions in mm) L SQ SQ Ø + STRO asic ore * F X.5 X.5 6X.5 6X.5 0X.5 0X.5 7X G /8 G /4 G /4 G 3/8 G 3/8 G / G / L X 6X 8X.5 8X.5 0X.5 0X.5 X.75 * Stroke length above 000 mm offered with stop tube Front and rear flange mounting ore ushion Stroke djustable ouble-nded Reed Switch onnect iagram Reed switch Load Power - 4 NOS - 4 NOS F ore sizes edium 3, 40, 50, 63, 80, 00, 5 mm ompressed air (filtered and lubricated) esign Piston cylinder with cushion/non-cushion version Pressure range 7 to 50 psi (0.5 to 0 bar) Temperature range -0 to 60 onstruction nd covers- nylon, aluminium (optional), Tube- ickey ouse profile aluminium semi-hard anodised, Piston rod- N-8 hard chrome plated, stainless steel (optional), Piston- nylon, aluminium (optional), ountings- mild steel/cast iron, Seals- NR Ordering code + STRO + STRO ore R0 R R R6 R6 R0 R5 F I FP I 00 G 050 X X X ISO Pressure 50 psi ountings Front flange G Foot Rear flange I Stud Rear eye Neck Rear clevis asic Intermediate trunnion F entre trunnion ushion Non-cushion ore size Ram size 6 F 0 G 5 36 Stroke Type Stroke adjustable ouble ended 4 uplex 5 Single acting Type X Std. (metric) 3 Female metric 4 ollow male 5 ollow female Type 3 9 Rod extension 0 Special Piston with magnet Reed switch to be order separately, Part no. P-39R-5 L + STRO + STRO Ø + STRO/ Foot and centre trunnion mounting ore F L Fluid Power Products Fluid Power Products 5

9 ISO Pneumatic ylinders (Series S) ylinders with aluminum casting end covers, aluminum casting piston and Square profile aluminum tube igh performance cylinders for modern demands imensions (ll dimensions in mm) asic ore Polyurethane seal ensures long life and high speed imensions as per ISO 555, V 456 odern type injection moulded reed switch 3 psi minimum pressure to move cylinder Options: ellows, viton seals, hollow shaft, rod extension and rod threading Specials: Reed switch, single-acting, stroke adjustable, double-ended and duplex L SQ SQ Ø + STRO * F X.5 X.5 6X.5 6X.5 0X.5 0X.5 7X G /8 G /4 G /4 G 3/8 G 3/8 G / G / L X 6X 8X.5 8X.5 0X.5 0X.5 X.75 * Stroke length above 000 mm offered with stop tube Front and rear flange mounting ushion Stroke djustable ouble-nded Reed Switch onnect iagram Load Reed switch Power - 4 NOS - 4 NOS ore F ore sizes edium 3, 40, 50, 63, 80, 00, 5 mm ompressed air (filtered and lubricated) Rear clevis and rear eye mounting esign Piston cylinder with magnetic and non magnetic version ore Pressure range Temperature range onstruction 7 to 50 psi (0.5 to 0 bar) -0 to 60, up to 50 with viton seals nd covers- aluminium, Tube- Square profile aluminium semi-hard anodised, Piston rod- N-8 hard chrome plated, stainless steel (optional), Piston- aluminium, ountings- mild steel/cast iron, Seals- NR, polyurethane + STRO R 0 R 3 R 3 R 7 R 7 R 0 R 5 Ordering code + STRO F N FP N 80 G 05 X X ISO New Pressure 50 psi ountings Front flange G Foot Rear flange I Stud Rear eye Neck Rear clevis asic Intermediate trunnion F entre trunnion ushion ore size Ram size 6 F 0 G 5 P 3 Stroke Type Stroke adjustable ouble ended 4 uplex 5 Single acting Type X Std. (metric) 3 Female metric 4 ollow male 5 ollow female 6 Viton Seal Type 3 Standard with magnet 9 Rod extension 0 Special Reed switch to be order separately, Part no. P-39R-5 Foot and centre trunnion mounting ore F L Fluid Power Products Fluid Power Products L Ø + STRO + STRO + STRO/ 7

10 ISO Pneumatic ylinders (Series R) ylinders with aluminum casting end covers, aluminum casting piston and Round profile aluminum tube igh performance cylinders for modern demands imensions as per ISO 555, V 456 Polyurethane seals for long life and high speed Injection moulded reed switch with aluminium bracket 3 psi minimum pressure to move cylinder Options: ellow, viton seals, hollow shaft, rod extension and rod threading Specials: Reed switch, single-acting, stroke adjustable, double-ended and duplex imensions L SQ SQ Ø + STRO asic ore * F X.5 X.5 6X.5 6X.5 0X.5 0X.5 7X G /8 G /4 G /4 G 3/8 G 3/8 G / G / L X 6X 8X.5 8X.5 0X.5 0X.5 X.75 * Stroke length above 000 mm offered with stop tube Front and rear flange mounting ushion Stroke djustable ouble-nded Reed Switch onnect iagram Load Reed switch Power - 4 NOS - 4 NOS ore F ore sizes edium esign Pressure range Temperature range onstruction Ordering code 3, 40, 50, 63, 80, 00, 5, 60, 00 mm ompressed air (filtered and lubricated) Piston cylinder with magnetic and non magnetic version 7 to 50 psi (0.5 to 0 bar) -0 to 60, up to 50 with viton seals nd covers- aluminium, Tube- round profile aluminium semi-hard anodised, Piston rod- N-8 hard chrome plated, stainless steel (optional), Piston- aluminium, ountings- mild steel/cast iron, Seals- NR, polyurethane + STRO + STRO Rear clevis and rear eye mounting ore R 0 R 3 R 3 R 7 R 7 R 0 R 5 F R FP R 80 G 05 X X ISO New ountings Front flange F entre trunnion Rear flange G Foot Rear eye I Stud Rear clevis Neck Intermediate trunnion asic ushion ore size Type Stroke-adjustable ouble-ended 4 uplex 5 Single-acting Type X Std. (metric) 3 Female metric 4 ollow male 5 ollow female 6 Viton seal Type 3 Standard with magnet (up to bore Ø 5 mm) 9 Rod extension 0 Special Reed switch to be ordered separately, Part no. P-39R-5 L Ø + STRO + STRO + STRO/ Foot and centre trunnion mounting ore F L Fluid Power Products Fluid Power Products 9

11 imensions (ll dimensions in mm) asic Rod fork ISO Pneumatic ylinders (Series, R and S) L L SQ. SQ. - 4 NOS Ø - 4 NOS - 4 NOS - 4 NOS + STRO + STRO + STRO + STRO + STRO + STRO/ ore * F x 36x G 3/4 G 3/ L X 6X * Stroke length above 000 mm offered with stop tube Front and rear flange mounting ore F 8 Rear clevis and rear eye mounting ore F Foot and centre trunnion mounting ore F L Fluid Power Products Fluid Power Products SQ T X inge mounting Thrust chart ore size (mm) Ø- 4 NOS ore F X X.5 50, X.5 80, X X 60, X ir Pressure bar 3 bar 4 bar 5 bar 6 bar 7 bar 8 bar 9 bar 0 bar Thrust (kgf) Free ir onsumption in l/5 mm 7 bar PUS PULL PUS PULL PUS PULL PUS PULL PUS PULL PUS PULL PUS PULL PUS PULL PUS PULL NOT The above thrust chart determines practical thrusts. Select force required by reading down from selected working pressure. * Rod yoke type, rod end aligner and rod end spherical eye is also available ISO Pneumatic ylinders (Series, R and S) ore F Select working pressure on top of chart. Read out cylinder bore size on left of the chart.

12 ISO ompact Pneumatic ylinders imensions (ll dimensions in mm) Space saving, compact and light weight design imensions as per ISO 87 Low friction, long life seals Large clamping force in relation to size Standard t-slot for magnetic reed switch agnetic sensor common for all sizes Options: ale and female piston rod threading, foot and flange mountings, viton seals Specials: Single-acting and double ended vailable mountings to suit leading international brands Single-nded ouble-nded Single-cting Reed Switch onnect iagram ore Sizes edium esign Pressure range Temperature range aterial Reed switch 6, 0, 5, 3, 40, 50, 63, 80, 00 mm ompressed air (filtered and lubricated) Piston cylinder with cushion pad, magnetic and non magnetic version 7 to 50 psi (0.5 to 0 bar) 5 to 60, up to 50 with viton seals (optional) nd covers and piston- aluminium, Tube- square profile aluminium anodised, Piston rod- N-8 hard chrome plated, ountings: mild steel, Seals- NR, polyurethane Load Power N T R + STRO + STRO F U ØW ore Ø5 mm ore Ø3-00 mm Y Ø L TR G - 4 NOS - 4 NOS T-slot for magnetic reed switch S L P L ore F G 8x.5 0x.5 0x.5 x.5 x.5 6x.5 6x.5 6x 8x.5 8x.5 0x.5 0x.5 x.75 x.75 5 G /8 G /8 G /8 G /8 G /8 G / L N P R S T U W Y * Stroke length offered up to max. 75 mm for all bore sizes Front and rear flange mounting ore F Ordering code FP 40 0 X X X Series Pressure 50 psi G ountings Front flange Rear flange Foot asic ushion pad ore size Ram size F 0 Stroke Type ouble-ended 5 Single-acting 6 Reed switch Type X Std. (metric) 3 Female metric Type 3 9 Rod extension Piston with magnet 0 Special Reed switch to be ordered separately, Part no. P-39R-5 4 NOS - + STRO + STRO Foot mounting ore F Fluid Power Products Fluid Power Products 3

13 ir-line ccessories ir Preparation Units Rugged and durable design Works up to 0 bar pressure Used to perform supportive pneumatic functions Variety Flow control valves with fine regulation Quick exhaust valves for higher cylinder speeds Inline check valves with low closing pressure igh pressure (0 bar) inline check valves Rotor seal coupling in sizes up to G / Inline mounted hand slide valves Silencers ir blow guns odular style, pre-assembled, ready to install Suitable for wall mounting ronze type filtering element Relieving type diaphragm operated regulator Non-rising adjusting knob with snap action lock Good flow and regulating characteristics Fine adjustment of lubrication Quick release bayonet bowl Port Size Flow Part ode SP lpm Inline Flow ontrol Valve Port Size Flow Part ode SP lpm Flow ontrol Valve Port Size SP Flow Part ode lpm Needle Valve Filter Regulator Lubricator Filter, Regulator, Lubricator G /4 000 PVF04G G / 000 PVF0G G 3/ PVF034G Quick xhaust Valve G /4 650 PVF04G G / 800 PVF0G G 3/ PVF034G Shuttle Valve G /4 000 PVNL04G G / 000 PVNL0G G 3/ PVNL034G Inline heck Valve Port Size G /8 G /4 G 3/8 G / G 3/4 G Flow rate (lpm) Fluid (media) ompressed air Pressure Operating: 0.5 to 0 bar, Proof: 5 bar Temperature range 5 to 60 Filter material Sintered bronze, plastic (polypropylene) G /4 500 PVQ04G G 3/8 500 PVQ038G G / 4500 PVQ0G G 3/ PVQ034G G 0000 PVQ00G G / 000 PVQG G /4 00 FPVS04G G 3/8 500 FPVS038G G / 400 FPVS0G G 3/ FPVS034G G 7000 FPVS00G G /4 000 PVNR04G5 G 3/8 800 PVNR038G5 G / 4500 PVNR0G5 G 3/ PVNR034G5 G 0000 PVNR00G5 Filter rating Standard: 5 µm, Optional: 5 µm Oil recommended Turbine oil (ISO VG 3) owl material Polycarbonate bowl with metal guard Regulator construction Relieving, diaphragm type rain type ifferential (semi-automatic) and automatic Rotor Seal oupling Silencer and Slide Valve Ordering code G /4 G 3/8 G / G 3/4 G G /4 G / PVRS04GRR PVRS038GRR PVRS0GRR PVRS034GRR PVRS00GRR PVRS4GRR PVRSGRR G /4 G 3/8 G / G 3/4 G G /4 G / L, R threading and stainless steel shaft also available for Rotor seal coupling. PVS04G PVS038G PVS0G PVS034G PVS00G PVS4G PVSG 3 G /4 000 PVS04G G 3/8 800 PVS038G G / 4000 PVS0G G 3/ PVS034G Filter PF-00-8 PF PF PF-400- PF PF Regulator PR-00-8 PR PR PR-400- PR PR Lubricator PL-00-8 PL PL PL-400- PL PL Filter, Regulator P-00-8 P P P-400- P P Filter, Regulator and Lubricator P-00-8 P P P-400- P P Filter, Regulator, Lubricator PU-00-8 PU PU PU-400- PU PU Fluid Power Products Fluid Power Products 5

14 Standard ydraulic ylinders ylinders with.s. end covers and Round profile.s. honed tube Long established design, proven ruggedness and reliability PTF seals and bearing strips ensure perfect sealing and smooth movement xternally removable bolt-on cartridge assembly Stroke length offered up to 3500 mm Working pressure up to 00 bar Options: ellows, rod extension and rod threading Specials: ore above dia. 300 mm, LVT, doubleended, stroke adjustable, large ports, working pressure up to 345 bar Non-ushion ushion Stroke djustable ouble-nded imensions (ll dimensions in mm) R SQ Ø Ø L 4 TI ROS Ø at P P STRO + F G asic ore * F G X.5 0X.5 4X3 33X3.5 45X4.5 45X4.5 70X3 L G /4 G 3/8 G / G / G 3/4 G 3/4 G 3/ P R * Stroke length above 000 mm offered with stop tube. Front and rear flange mounting ore ore sizes edium ineral oil (ISO VG 68) esign 40, 50, 65, 75, 00, 5, 50, 00, 50, 300 mm Piston cylinder with cushion/non-cushion version - 4 NOS - 4 NOS F Pressure range Up to 3000 psi (00 bar), 345 bar on request Temperature range -0 to 60, up to 50 with viton seals onstruction Ordering code S I ack Standard Intensifier Swing clamp Pressure 3000 psi 5000 psi nd covers- mild steel, Tube- mild steel seamless honed, Piston rod- N-8 hard chrome plated, stainless steel (optional), Piston- mild steel, ountings- mild steel/cast iron, Seals- PTF, NR F S 50 G 0450 X X X Front cushion Rear cushion 3 oth cushion 4 Non cushion ountings Front flange rectangular F Rear clevis round Rear flange rectangular G Foot Front flange round entre trunnion Rear flange round I Intermediate trunnion Rear clevis square asic ustom made hydraulic cylinder can be made on request. ore size Ram size F 74.6 G I Stroke Type Stroke adjustable ouble ended 3 Large Port Type X Std. (metric) Female inches Female metric 6 Viton seal Type 3 9 Rod extension 0 Special F Ø ØG- 4 NOS ØL Ø ØL Ø P R P levis, foot, intermediate trunnion and front trunnion mounting ore F G L P R ustomer to specify 6 Fluid Power Products Fluid Power Products 7

15 ydraulic Power Packs and Systems NOS OLS OF U I T W P L T PORTS TI ROS OF P I T R P Front flange and rear clevis mounting, round type Ø Ø ØS ore Ø STRO + F * ØY F X Z N L 0X.5 0X.5 4X3 33X3.5 45X4.5 45X4.5 70X3 75X3 00X3 50X N P R S T G /4 G 3/8 G / G / G 3/4 G 3/4 G 3/4 G 3/4 G 3/4 G 3/4 U W X Y Z R 8 R R R 8 R 40 R 50 R 55 R 90 R 0 R 40 From simple single pump-motor power packs to sophisticated multi pump-motor hydraulic systems in open loop, we have the expertise and experience of 30 years to design and build hydraulic power systems to meet your requirement. Using modern-technology hydraulic elements, modular manifold construction, electrical interlocks and the latest design and building techniques in hydraulics, we can provide our customers with energy-efficient, reliable hydraulic power systems. These power systems can be supplied along with hydraulic cylinders and controls for operation. ylinder accessories Options Fixed displacement or variable displacement pump systems Rod fork and rod yoke onventional, proportional or servo technology valve system ore Flow handling capacities of up to 000 lpm, pressures up to 700 bar X G ll systems are built to cleanliness level of NS class 6 lectric servo pump driven system for superior energy efficiency Intensifiers for high pressure applications up to 000 bar are available F G X.5 0X.5 4X3 33X3.5 45X4.5 45X4.5 70X3 lean rust-proof stainless steel tank power systems for pharmaceutical, food industry and special applications Systems suitable for water glycol and other fire resistant fluids also available L X N R L N R Fluid Power Products Fluid Power Products 9

16 Pneumo-ydraulic ooster Pumps esign of pressure intensification up to 000 bar Works on the principle of different bore area ratios Suitable for oil, water and various other fluids vailable in various bore area ratios Option: ouble-acting booster pumps with higher displacement per stroke, higher capacity hydraulic tanks pplication: Pressure testing of valves, pressure vessels, fittings, hoses and pipes. Used as power source for clamp heads, hydraulic actuators and expansion of condenser coils Speciality Products ydraulic jacks used in construction industry Servo cylinders for precision control in industrial testing equipment and SPs odel No./Ordering ode FP:03T FP:09T FP:035T FP:064T FP:44T ore area ratio 0:3 0:9 0:35 :64 :44 isplacement per stroke (cc) aximum pneumatic input pressure (psi) inimum pneumatic input pressure (psi) ydraulic outlet pressure when operated at 00 psi pneumatic input pressure (psi) ydraulic tank capacity (ltr.) Type ctuation Pneumo-hydraulic, single-acting, self reciprocating y means of 4 way 5 port double pilot operated directional control valve Stainless steel cylinders used in chemical plants, food and pharmaceutical industry Swing clamp cylinders with locking arrangement and valve stand for machine tools, SPs, high temperature furnaces, etc. Large bore singleacting cylinders used in big hydraulic presses PN hydraulic cylinders in bore size 40, 50, 63, 80, 00, 0 and 5 for die casting machines ompact type hydraulic cylinders in bore size 40, 50, 63, 80, 00, 0 and 5 Special type pneumatic cylinder with manual override 30 Fluid Power Products Fluid Power Products 3

17 lectropneumatics & ydraulics (India) Pvt. Ltd. Gat No. 54/55, harabe Wadi, hakan-talegaon Road, hakan, Pune 4050, India. Tel. : Fax. : pneumatics@electropneumatics.com design@synergydesign.in print@pragaticom Sep 06