Specialty Bearing Interchange Guide
|
|
- Adam Webb
- 6 years ago
- Views:
Transcription
1 pecialty earing Interchange uide
2 Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are compared. Today, our bearings benefit from new technology and innovative designs; providing our cusmers with the highest quality and best selection of roller bearings in the industry. The pecialty earing Interchange uide was developed help cusmers that are currently using our legacy products move wards aldor odge improved technology. Included in this guide are ll teel, pecial uty (6 1/2 inch and larger), teel Type and Unisphere II Plummer lock-etric roller bearings. This guide provides you with the necessary information required make the transition. or any questions, call aldor usmer Order ngineering at
3 pecialty earing Interchange uide Table of ontents unctional interchanges included in this guide *aldor odge parts and service group will offer a direct interchange for these part numbers ll teel interchanges teel Imperial pecial uty 6 1/2 and arger interchanges I ydraulic... 6 Interchanges included in this guide *urrent part numbers will be discontinued for these products Unisphere II Plumber lock-etric interchanges IN Plummer lock... 8 Unisphere II lange-etric interchanges Imperial lange-etric teel Type interchanges teel & teel Imperial *Included on these pages are dimensional information, along with speed and load ratings. 3
4 ll teel Interchange NOT: ll sizes use a 1/8-27 NPT hydraulic grease fitting OT I. IN ll teel Pillow lock 4-olt ase NON-PNION ONTRUTION PNION ONTRUTION ast teel Non-xpansion* ast teel xpansion haft ize In Part No. escription Weight lb haft ize Part No. escription Weight lb 2-11/ P / P / P / P P P / P / P / P / P / P / P haft ize In. in. teel IPRI- Pillow lock 4-olt ax. olt ia. xp* 2-11/ / / / /16 3-1/ / /8 4-7/ / /8 *Total xpansion for xpansion earing Only haft ize In. Non-xpansion xpansion Part No. Part Name Part No. Part Name 2-11/ P4-IP-211R P4-IP-211R 2-15/ P4-IP-215R P4-IP-215R P4-IP-300R P4-IP-300R 3-7/ P4-IP-307R P4-IP-307R 3-1/ P4-IP-308R P4-IP-308R 4-7/ P4-IP-407R P4-IP-407R IN R 4 haft ize In 2-11/16 in. ax. olt ia. R Total xp. 2-15/ / / /16 3-1/2 PNION NON-PNION / / / / / Z
5 peed and oad Ratings ll teel Pillow lock - 4 olt ase haft ize 2-11/ / /16 3-1/2 3-15/ /16 10 ife - ours llowable quivalent Radial oad Rating (lbs.) at Various RP** ,000 18,829 15,294 11,618 9,437 8,356 7,665 7,511 7,239 7,021 6,760 6,343 6,067 5,971 5,690 5,569 5,382 10,000 15,294 12,423 9,437 7,665 6,787 6,226 6,101 5,880 5,703 5,491 5,152 4,928 4,850 4,622 4,524 4,372 30,000 11,000 8,935 6,787 5,513 4,882 4,478 4,388 4,229 4,102 3,949 3,705 3,544 3,488 3,324 3,254 3,144 50,000 9,437 7,665 5,823 4,730 4,188 3,842 3,765 3,628 3,519 3,388 3,179 3,041 2,992 2,852 2,791 2, ,000 7,665 6,226 4,730 3,842 3,402 3,120 3,058 2,947 2,858 2,752 2,582 2,470 2,431 2,316 2,267 2,191 5,000 35,947 29,198 22,181 18,016 15,953 14,634 14,340 13,820 13,404 12,906 12,109 11,583 11,398 10,863 10,633 10,275 10,000 29,198 23,716 18,016 14,634 12,958 11,886 11,647 11,226 10,887 10,483 9,836 9,408 9,258 8,823 8,636 8,346 30,000 21,000 17,057 12,958 10,525 9,319 8,549 8,377 8,074 7,830 7,540 7,074 6,767 6,659 6,346 6,211 6,003 50,000 18,016 14,634 11,117 9,030 7,995 7,334 7,187 6,927 6,718 6,468 6,069 5,805 5,713 5,444 5,329 5, ,000 14,634 11,886 9,030 7,334 6,494 5,957 5,838 5,626 5,457 5,254 4,929 4,715 4,640 4,422 4,328 4,183 5,000 39,371 31,979 24,293 19,732 17,472 16,027 15,705 15,137 14,680 14,135 13,262 12,686 12,484 11,897 11,645 11,254 10,000 31,979 25,975 19,732 16,027 14,192 13,018 12,757 12,295 11,924 11,482 10,772 10,304 10,140 9,664 9,459 9,141 30,000 23,000 18,682 14,192 11,527 10,207 9,363 9,175 8,843 8,576 8,258 7,748 77,411 7,293 6,950 6,803 6,574 50,000 19,732 16,027 12,175 9,889 8,757 8,033 7,871 7,586 7,358 7,085 6,647 6,358 6,257 5,963 5,836 5, ,000 16,027 13,018 9,889 8,033 7,113 6,525 6,394 6,162 5,976 5,754 5,399 5,164 5,082 4,843 4,741 4,581 5,000 59,056 47,968 36,440 29,598 26,208 24,041 23,558 22,705 22,020 21,203 19,893 19,029 18,726 17,846 17,468 16,881 10,000 47,968 38,962 29,598 24,041 21,288 19,527 19,135 18,442 17,886 17,222 16,158 15,456 15,210 14,496 14,188 13,711 30,000 34,500 28,023 21,288 17,291 15,311 14,045 13,762 13,264 12,864 12,387 11,622 11,117 10,939 10,426 10,204 9,862 50,000 29,598 24,041 18,263 14,834 13,135 12,049 11,807 11,379 11,036 10,627 9,970 9,537 9,385 8,944 8,755 8, ,000 24,041 19,527 14,834 12,049 10,669 9,787 9,590 9,243 8,964 8,632 8,098 7,747 7,623 7,265 7,111 6,872 teel Imperial - Pillow lock ize (In) 2-11/ /16 3-1/2 3-11/ /16 10 ife - ours llowable quivalent Radial oad Rating (lbs.) at Various RP* ,000 1,300 1,500 1,700 1,800 2,000 2,200 2,600 2,750 3,000 10,000 14,959 12,151 10,759 9,230 7,497 6,639 6,090 5,629 5,392 5,194 5,105 4,946 3,457 4,572 4,496 4,380 30,000 10,759 8,739 7,738 6,639 5,392 4,775 4,380 4,048 3,878 3,735 3,672 3,558 3,457 3,288 3,233 3,150 40,000 9,870 8,017 7,098 6,090 4,946 4,380 4,018 3,714 3,558 3,427 3,368 3,263 3,171 3,016 2,966 2,890 60,000 8,739 7,098 6,285 5,392 4,380 3,878 3,558 3,288 3,150 3,034 2,982 2,890 2,808 2,671 2,626 2, ,000 7,497 6,090 5,392 4,626 3,758 3,327 3,052 2,821 2,703 2,603 2,559 2,479 2,409 2,291 2,253 2,195 10,000 23,611 19,178 16,981 14,569 11,833 10,478 9,612 8,884 8,511 8,197 5,795 7,807 7,587 7,216 30,000 16,981 13,793 12,213 10,478 8,511 7,536 6,913 6,390 6,121 5,896 5,795 5,615 5,457 5,190 40,000 15,577 12,653 11,203 9,612 7,807 6,913 6,341 5,861 5,615 5,408 5,316 5,151 5,006 4,761 60,000 13,793 11,203 9,920 8,511 6,913 6,121 5,615 5,190 4,972 4,789 4,707 4,561 4,432 4, ,000 11,833 9,612 8,511 7,302 5,931 5,251 4,817 4,453 4,266 4,108 4,038 3,913 3,803 3,617 10,000 29,919 24,302 21,518 18,461 14,995 13,278 12,180 11,258 7,757 10,387 10,211 9,893 9,614 30,000 21,518 17,478 15,476 13,278 10,785 9,549 8,760 8,097 7,757 7,471 7,344 7,115 6,915 40,000 19,739 16,033 14,197 12,180 9,893 8,760 8,036 7,427 7,115 6,853 6,737 6,527 6,343 60,000 17,478 14,197 12,571 10,785 8,760 7,757 7,115 6,577 6,300 6,068 5,965 5,779 5, ,000 14,995 12,180 10,785 9,252 7,515 6,655 6,104 5,642 5,405 5,206 5,117 4,958 4,818 10,000 37,489 30,450 26,963 23,132 18,789 16,637 15,261 10,145 13,513 13,015 12,794 12,396 30,000 26,963 21,901 19,392 16,637 13,513 11,966 10,976 10,145 9,719 9,361 9,202 8,915 40,000 24,733 20,090 17,789 15,261 12,396 10,976 10,069 9,307 8,915 8,587 8,441 8,178 60,000 21,901 17,789 15,751 13,513 10,976 9,719 8,915 8,241 7,894 7,603 7,474 7, ,000 18,789 15,261 13,513 11,593 9,417 8,338 7,649 7,070 6,773 6,523 6,412 6,213 Only the labyrinth seal ( seal) may be used the right of the heavy line. or applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond the 10 shown at the left. pplications in the light shaded area may require a high temperature lubrication, consult odge ngineering at (864) * IPRI - Type imensional ousing 5
6 pecial uty 6 1/2 and arger Interchange P NON-P R P OT I. R IN pecial uty Pillow lock (Inch) 4-olt ase NON-P ray NON-P Iron Non-xpansion P R 6-1/16" TRU 8" ONTRUTION ray Iron xpansion haft ize In Part No. escription Weight lb haft ize Part No. escription Weight lb 6-1/ P / P / NON-P P / P P4--700R P / P / P P P P P haft ize In * * * * P* R xp** 2-3/8" TRU 3-1/2" in. ax. olt 3-11/16" ia. TRU 6" ONTRUTION ONTRUTION 6-1/2 6-15/ / /2 7 P 7-15/ / /2 * These re s ast urfaces. imensions ay luctuate ue To raft ngles nd Pattern hifts. ** xp-total xpansion ivided qually On oth ides Of earing (xpansion earing Only). 6-1/16" TRU 8" ONTRUTION I Pillow lock ydraulic ousing haft Part earing escription 1 Insert esignation ize In No. 1 Number K 6-1/2" P4536-I-608R K 6-15/16" P4538-I-615R K 7" P4538-I-700R K 7-15/ P4544-I-715R K 8" P4544-I-800R K PORT P 30 PORT 1 1 K PORT IN haft ize In eries earing 1 in. ax. olt ia. K P 1 Total xp /2" K /16" 7" 7-15/16" 8" K / K /
7 peed and oad Ratings odge pecial uty Tapered Roller earings llowable quivalent Radial oad Rating (lbs.) at Various RP* ore ize 10 ife - ours /2 6-15/ /16 8 5, , , , , , , , , , I arge-ore ydraulic ssist pherical Roller earings election Table haft ize dapter ounted (In) 22200K eries ousing esignation llowable quivalent Radial oad Rating (lbs.) at Various RP* earing eries ax RP rease ife 6-1/ K / / K K ife - ours , ,943 89,301 67,838 55,102 48,791 30,000 79,073 64,227 48,791 39,631 35,092 60,000 64,227 52,169 39,631 32,190 28,503 10,000 97,326 79,053 60,054 48,779 43,192 30,000 69,999 56,857 43,192 35,083 31,065 60,000 56,857 46,182 35,083 28,496 25,232 10, , ,869 81,184 65,942 58,389 30,000 94,629 76,862 58,389 47,427 41,995 60,000 76,862 62,432 47,427 38,522 34,110 7
8 Unisphere II Plummer lock Interchange (etric) R IN PNION NON-PNION Unisphere II Plummer lock earing (etric) earing haft ize 50mm 55mm 60mm Non-xpansion Part No Part Name P2-UN2-050 P2-UN2-055 P2-UN2-060 xpansion Part No Part Name P2-UN2-050 P2-UN2-055 P2-UN2-060 Weight lb mm 75mm P2-UN2-070 P2-UN P2-UN2-070 P2-UN mm 85mm P2-UN2-080 P2-UN P2-UN2-080 P2-UN haft ize (In) in ax olt ia. R 50mm 55mm 60mm mm 75mm 80mm 85mm
9 IN Plummer lock IN NOT: ll sizes use a 1/8-27 NPT hydraulic grease fitting Z IN R IN PNION NON-PNION IN Plummer locks with Trident eals ixed bearing eries haft ize Part No. escription mm P2511-IN-050R mm P2512-IN-055R mm P2513-IN-060R mm P2516-IN-070R mm P2517-IN-075R mm P2518-IN-080R mm P2519-IN-085R eries haft ia. mm in ax olt ia R Total xp
10 peed and oad Ratings asy election Table for etric Unisphere ouble Row pherical Roller earings haft ize ife - ours llowable quivalent Radial oad Rating (KN) at Various RP* ,020 1,250 1,400 1,700 1,900 2,325 2,625 10, , , , , , , , , , , , , , , , , , , , , , , , , In the light shaded area, a line--line light press fit on the shaft is required. 10
11 peed and oad Ratings IN ouble Row pherical Roller earing llowable quivalent Radial oad Rating (kn) at Various RP ousing 10 ife - ours mm mm mm mm mm mm mm mm
12 etric Unisphere II - 4 olt lange Interchange NOT: ll sizes use a 1/8-27 NPT hydraulic grease fitting N K PNION NON-PNION haft ize Non-xpansion* xpansion pprox. Wt. Kgs. Part No. Part Name Part No. Part Name 40mm UN UN mm UN UN mm UN UN mm UN UN mm UN UN mm UN UN mm UN UN mm UN UN onsult O for sizes not listed. * urnished unless otherwise specified. etric Unisphere II - 4-olt lange - imensions (mm) haft ize olt ia. K 40mm 45mm mm mm mm 65mm mm mm imensions shown are for non-expansion units. Total xp. N 12
13 Imperial 4 olt quare lange earing - Part Numbers Non-xpansion xpansion haft ize Part No. Part Name Part No. Part Name N 4-IP-040R IP-045R IP-050R IP-050R 4-IP-055R IP-060R IP-065R 4-IP-070R IP-070R ssembled order K P N Imperial 4 olt quare lange earing - etric haft ize K P olt ia. PNION K N P NON-PNION / / / / Total xp. Z 13
14 peed and oad Ratings asy election Table for etric Unisphere ouble Row pherical Roller earings haft ize mm llowable quivalent Radial oad Rating (KN) at Various Revolutions per inute ife ours ,020 1,250 1,400 1,700 1,900 2,325 2,625 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
15 peed and oad Ratings Imperial 4-olt qure lange earing ouble Row pherical Roller earing ousing mm mm mm mm mm mm mm mm mm mm 10 llowable quivalent Radial oad Rating (kn) at Various RP ife ours , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Use the labyrinth () seal for applications the right of the vertical line. or applications in the ark shaded areas, the maximum load for the specific speed is shown. The load does not correspond the 10 shown. pplications in the ight shaded areas may require high temperature lubrication. Please consult O ngineering. 15
16 teel Type Interchange Type -tra Pillow lock (Inch) - 2-olt ase ast teel haft ize (Inches) Part No. escription Weight lb 1-3/ P2--106R 7 1-7/ P2--107R 7 1-1/ P2--108R / P2--110R / P2--111R / P2--112R / P2--114R / P2--115R P2--200R / P2--203R / P2--204R / P2--207R / P2--208R / P2--211R / P2--212R / P2--215R P2--300R / P2--303R / P2--304R / P2--307R / P2--308R OT I. IN 1-3/16" TRU 3" ONTRUTION 3-3/16" TRU 3-1/2" ONTRUTION haft ize (Inches) in. ax. olt ia /8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-7/8 1-15/ / / / / / /4 2-7/16 2-1/2 2-11/16 2-3/4 2-15/ /16 3-1/4 3-7/16 3-1/ / / /
17 teel olt Pillow lock with Type imensions haft ize In Part No. Part Name 1-3/ P R 1-7/ P R 1-11/ P R 1-15/ P R P R 2-3/ P R 2-7/ P R 2-11/ P R 2-15/ P R P R 3-7/ P R haft ize In 1-3/8 1-7/16 in. teel Imperial- 2-olt Pillow lock with Type imensions haft ize In Part No. Part Name 1-1/ P2-IP-108R 1-5/ P2-IP-110R 1-3/ P2-IP-112R 1-7/ P2-IP-114R 2-3/ P2-IP-203R 2-1/ P2-IP-204R 2-1/ P2-IP-208R 2-3/ P2-IP-212R 3-3/ P2-IP-303R 3-1/ P2-IP-304R 3-1/ P2-IP-308R ax. olt ia. R Total xp. Z et crew ize / / / / / / / / / / / / / / / / / / / / / / / / / / / / & R imensions o Not Include imension haft ize In 1-3/8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-7/8 1-15/16 2 in. ax. olt ia. R Total xp. Torque In-bs / / / / / / / / / /4 2-7/ / / /2 2-11/16 2-3/4 2-15/ / / /16 3-1/4 3-7/16 3-1/ / / & R imensions o Not Include imension T PNION IN IN 1/8-27 NPT NON-PNION R Z IN PNION PNION IN R NON-PNION NON-PNION R Z Z IN Z IN 17
18 OT I. OT I. 1 1 ast teel - Type 4-olt Pillow lock teel haft ize (In) Part No. escription IN INWeight (lb) 3-15/ P4--315R P4--400R / P4--407R / P4--408R / P4--415R P4--500R OT I. 30 * 1 IN 2-1/4" TRU 2-1/4" 3" ONTRUTION TRU 3" ONTRUTION 3-3/16" TRU 5" ONTRUTION haft ize (In) 3-15/ /16 4-1/2 4-15/16 5 * in. ax. olt ia / / / /16" TRU 7" ONTRUTION 18
19 teel olt Pillow lock with Type imensions Non-xpansion haft ize In Part No. Part Name 4-7/ P R 4-15/ P R haft ize In in. ax. olt ia. R Total xp. Z et crew ize / Torque b-in 4-7/ / / / / / /8 N/ N/ 5/ teel Imperial- 4-olt Pillow lock with Type imensions Non-xpansion haft ize In Part No. Part Name 3-15/ P4-IP-315R P4-IP-400R 4-1/ P4-IP-408R 4-15/16 IN P4-IP-415R P4-IP-500R R Z IN IN 3-11/16 TRU 5 PNION 3-11/16 TRU 5 NON-PNION R Z IN haft ize In in. ax. olt ia. R Total xp. Z 3-15/ / / / / / / /16 TRU /16 TRU PNION NON-PNION 3/ / / / / /
20 peed and oad Ratings asy election for teel Type -tra 20 haft ize 1-3/16 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-11/16 1-3/4 1-7/8 1-15/ /16 2-1/4 2-7/16 2-1/2 2-11/16 2-3/4 2-15/ /16 3-1/4 3-7/16 3-1/2 3-15/ /16 4-1/2 4-15/ ife - ours llowable quivalent Radial oad Rating (lbs) at Various RP* ,005 1,849 1,781 1,719 1,683 1,651 1,572 1,498 1,445 1,398 1,362 1,330 1,306 1, ,442 1,330 1,281 1,236 1,211 1,187 1,131 1,077 1,039 1, ,323 1,220 1,175 1,134 1,111 1,089 1, ,172 1,080 1,040 1, ,005 0, ,197 2,947 2,839 2,740 2,684 2,632 2,506 2,388 2,303 2,228 2,172 2,120 2, ,299 2,120 2,042 1,971 1,930 1,893 1,803 1,718 1,657 1,602 1,562 1,525 1, ,109 1,945 1,873 1,808 1,771 1,736 1,654 1,576 1,520 1,470 1,433 1,399 1, ,868 1,722 1,658 1,601 1,568 1,538 1,464 1,395 1,346 1,302 1,269 1,238 1, ,602 1,477 1,423 1,373 1,345 1,319 1,256 1,197 1,154 1,117 1,089 1,062 1, ,110 3,789 3,649 3,522 3,450 3,383 3,222 3,070 2,961 2,864 2, ,956 2,725 2,625 2,533 2,481 2,433 2,317 2,208 2,129 2,060 2, ,711 2,500 2,408 2,324 2,276 2,232 2,126 2,025 1,953 1,889 1, ,401 2,213 2,132 2,058 2,015 1,976 1,882 1,793 1,730 1,673 1, ,060 1,899 1,829 1,765 1,729 1,696 1,615 1,539 1,484 1,435 1, ,406 4,984 4,800 4,633 4,538 4,450 4,238 4,038 3,895 3, ,888 3,584 3,452 3,332 3,264 3,201 3,048 2,904 2,801 2, ,567 3,288 3,167 3,057 2,994 2,936 2,796 2,664 2,569 2, ,158 2,911 2,804 2,707 2,651 2,600 2,476 2,359 2,275 2, ,709 2,498 2,406 2,322 2,274 2,230 2,124 2,024 1,952 1, ,726 5,278 5,084 4,907 4,806 4,714 4,489 4,277 4, ,118 3,796 3,656 3,530 3,457 3,390 3,228 3,076 2, ,778 3,483 3,354 3,238 3,171 3,110 2,961 2,822 2, ,345 3,084 2,970 2,867 2,808 2,754 2,622 2,498 2, ,870 2,646 2,548 2,460 2,409 2,362 2,250 2,143 2, ,162 5,680 5,471 5,281 5,172 5,072 4,830 4, ,432 4,085 3,935 3,798 3,720 3,648 3,474 3, ,065 3,748 3,610 3,484 3,412 3,347 3,187 3, ,600 3,318 3,196 3,085 3,022 2,963 2,822 2, ,088 2,847 2,742 2,647 2,592 2,542 2,421 2, ,464 5,959 5,739 5,540 5,426 5,321 5, ,649 4,286 4,128 3,985 3,902 3,827 3, ,265 3,932 3,787 3,655 3,580 3,511 3, ,776 3,481 3,353 3,237 3,170 3,109 2, ,240 2,987 2,877 2,777 2,719 2,667 2, ,318 9,512 9,161 8,843 8, ,421 6,841 6,589 6,360 6, ,807 6,276 6,044 5,834 5, ,028 5,557 5,352 5,166 5, ,171 4,767 4,592 4,432 4, ,184 13,076 12,594 12, ,201 9,404 9,058 8, ,358 8,627 8,309 8, ,286 7,639 7,357 7, ,109 6,553 6,312 6, ,905 18,225 17,439 16,077 15, ,036 13,108 12,543 11,563 11, ,792 12,024 11,505 10,607 10, ,213 10,647 10,188 9,392 9, ,477 9,134 8,740 8,057 7, ,437 46,653 41,310 35,441 28,787 25,095 24,014 22, ,310 33,554 29,711 25,490 20,704 18,049 17,271 15, ,894 30,780 27,254 23,382 18,992 16,557 15,843 14, ,554 27,254 24,133 20,704 16,817 14,661 14,028 12, ,787 23,382 20,704 17,762 14,428 12,578 12,035 11,095 In the shaded area,, I,, and T mounted units require a line--line light press fit of shaft In the boxed area, Type K mounted units require a line--line light press fit of shaft.
21 peed and oad Ratings asy election for ouble Row pherical Roller earings llowable quivalent Radial oad Rating (lbs.) at Various RP* haft ize 1-3/16 1-1/2 1-11/16 1-3/4 1-15/ /16 2-1/4 2-7/16 2-1/2 2-11/ /16 3-1/2 3-15/ /16 4-1/2 4-15/ ife - ours ,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,581 2,465 2,393 1,495 2,157 2,122 2,078 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,078 2,020 1,921 1,856 1,773 1,721 1,495 1,552 1,526 1,495 40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,907 1,853 1,762 1,703 1,626 1,579 1,495 1,423 1,400 1,371 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,688 1,641 1,560 1,508 1,440 1,398 1,324 1,260 1,240 1, ,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,448 1,407 1,339 1,293 1,235 1,199 1,136 1,081 1,063 1,042 10,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,581 2,465 1,579 2,266 2,157 2,122 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,078 2,020 1,921 1,856 1,773 1,579 1,630 1,552 1,526 40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,907 1,853 1,762 1,703 1,626 1,579 1,495 1,423 1,400 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,688 1,641 1,560 1,508 1,440 1,398 1,324 1,260 1, ,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,448 1,407 1,339 1,293 1,235 1,199 1,136 1,081 1,063 10,000 7,930 6,441 5,704 4,893 3,975 3,366 3,209 3,057 2,970 2,825 2,729 1,720 2,531 2,396 2,282 30,000 5,704 4,633 4,102 3,519 2,859 2,421 2,308 2,198 2,136 2,032 1,963 1,720 1,820 1,724 1,641 40,000 5,232 4,250 3,763 3,228 2,622 2,221 2,117 2,017 1,960 1,864 1,801 1,720 1,670 1,581 1,505 60,000 4,633 3,763 3,332 2,859 2,322 1,966 1,875 1,786 1,735 1,650 1,594 1,523 1,479 1,400 1, ,000 3,975 3,228 2,859 2,452 1,992 1,687 1,608 1,532 1,489 1,416 1,368 1,306 1,269 1,201 1,144 10,000 9,733 7,905 7,000 6,005 4,878 4,131 3,939 3,751 3,645 3,467 2,210 3,199 3,106 2,941 30,000 7,000 5,686 5,035 4,319 3,508 2,971 2,833 2,698 2,622 2,494 2,210 2,301 2,234 2,115 40,000 6,421 5,216 4,618 3,962 3,218 2,726 2,599 2,475 2,405 2,288 2,210 2,111 2,050 1,940 60,000 5,686 4,618 4,089 3,508 2,850 2,413 2,301 2,191 2,130 2,026 1,957 1,869 1,815 1, ,000 4,878 3,962 3,508 3,010 2,445 2,070 1,974 1,880 1,827 1,738 1,679 1,603 1,557 1,474 10,000 14,058 11,419 10,111 8,674 7,046 5,967 5,689 5,418 5,266 5,008 4,838 4,621 4,487 30,000 10,111 8,213 7,272 6,239 5,068 4,292 4,092 3,897 3,787 3,602 3,480 3,324 3,227 40,000 9,275 7,534 6,671 5,723 4,649 3,937 3,753 3,575 3,474 3,304 3,192 3,049 2,960 60,000 8,213 6,671 5,907 5,068 4,116 3,486 3,324 3,165 3,076 2,926 2,827 2,700 2, ,000 7,046 5,723 5,068 4,348 3,531 2,991 2,851 2,716 2,639 2,510 2,425 2,316 2,249 10,000 14,959 12,151 10,759 9,230 7,497 6,350 6,054 5,766 3,697 5,329 5,149 4,917 30,000 10,759 8,739 7,738 6,639 5,392 4,567 4,354 4,147 3,697 3,833 3,703 3,537 40,000 9,870 8,017 7,098 6,090 4,946 4,189 3,994 3,804 3,697 3,516 3,397 3,244 60,000 8,739 7,098 6,285 5,392 4,380 3,709 3,537 3,368 3,273 3,113 3,008 2, ,000 7,497 6,090 5,392 4,626 3,758 3,182 3,034 2,890 2,808 2,671 2,580 2,464 10,000 23,611 19,178 16,981 14,569 11,833 10,022 9,555 6,004 8,844 8,411 30,000 16,981 13,793 12,213 10,478 8,511 7,208 6,872 6,004 6,360 6,050 40,000 15,577 12,653 11,203 9,612 7,807 6,612 6,304 6,004 5,835 5,549 60,000 13,793 11,203 9,920 8,511 6,913 5,855 5,582 5,316 5,166 4, ,000 11,833 9,612 8,511 7,302 5,931 5,023 4,789 4,561 4,432 4,216 10,000 29,919 24,302 21,518 18,461 14,995 12,699 7,988 11,531 11,206 30,000 21,518 17,478 15,476 13,278 10,785 9,134 7,988 8,294 8,060 40,000 19,739 16,033 14,197 12,180 9,893 8,378 7,988 7,608 7,393 60,000 17,478 14,197 12,571 10,785 8,760 7,419 7,073 6,737 6, ,000 14,995 12,180 10,785 9,252 7,515 6,365 6,068 5,779 5,616 10,000 37,489 30,450 26,963 23,132 18,789 10,498 15,171 14,449 30,000 26,963 21,901 19,392 16,637 13,513 10,498 10,911 10,392 40,000 24,733 20,090 17,789 15,261 12,396 10,498 10,009 9,533 60,000 21,901 17,789 15,751 13,513 10,976 9,296 8,863 8, ,000 18,789 15,261 13,513 11,593 9,417 7,975 7,603 7,242 10,000 52,628 42,747 37,851 32,473 26,377 14,738 21,298 30,000 37,851 30,745 27,224 23,356 18,971 14,738 15,318 40,000 34,722 28,203 24,973 21,424 17,402 14,738 14,051 60,000 30,745 24,973 22,112 18,971 15,409 13,050 12, ,000 26,377 21,424 18,971 16,275 13,220 11,196 10,674 Only the labyrinth seal ( seal) may be used the right of the heavy line. In the light shaded area, a line--line light press fit on the shaft is required. or applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond the 10 shown at the left. 21
22 peed and oad Ratings Imperial pherical Roller earing ize Inches 1-1/8 1-1/2 *1-1/2 1-5/8 1-11/16 1-3/4 *1-3/4 1-7/8 1-15/ /16 2-1/4 *2-1/4 2-3/8 2-7/16 2-1/2 2-11/ /16 3-1/2 3-11/ /16 4-1/2 4-15/ ife ours llowable quivalent Radial oad Rating (lbs.) at Various Revolutions per inute , , , , , ,000 7,498 6,090 5,393 4,626 3,758 3,327 3,052 2,821 2,703 2,603 2,559 2,479 2,409 2,292 2,253 2,195 1,521 2,045 1,944 1,331 1,820 30,000 5,393 4,380 3,878 3,327 2,703 2,393 2,195 2,029 1,944 1,872 1,840 1,783 1,733 1,648 1,621 1,579 1,521 1,471 1,398 1,331 1,309 40,000 4,947 4,018 3,558 3,052 2,479 2,195 2,014 1,861 1,783 1,717 1,688 1,636 1,590 1,512 1,487 1,448 1,395 1,349 1,282 1,221 1,201 60,000 4,380 3,558 3,150 2,703 2,195 1,944 1,783 1,648 1,579 1,521 1,495 1,448 1,407 1,339 1,316 1,282 1,235 1,195 1,136 1,081 1, ,000 3,758 3,052 2,703 2,319 1,883 1,668 1,530 1,414 1,355 1,305 1,282 1,243 1,208 1,148 1,129 1,100 1,060 1, ,000 7,930 6,441 5,704 4,893 3,975 3,519 3,228 2,984 2,859 2,753 2,706 2,622 2,548 2,424 2,383 2,322 1,608 2,163 2,056 1,957 30,000 5,704 4,633 4,102 3,519 2,859 2,531 2,322 2,146 2,056 1,980 1,947 1,886 1,833 1,743 1,714 1,670 1,608 1,556 1,479 1,408 40,000 5,232 4,250 3,763 3,228 2,622 2,322 2,130 1,969 1,886 1,816 1,786 1,730 1,681 1,599 1,572 1,532 1,475 1,427 1,356 1,291 60,000 4,633 3,763 3,332 2,859 2,322 2,056 1,886 1,743 1,670 1,608 1,581 1,532 1,489 1,416 1,392 1,356 1,306 1,264 1,201 1, ,000 3,975 3,228 2,859 2,452 1,992 1,764 1,618 1,496 1,433 1,380 1,356 1,314 1,277 1,215 1,194 1,164 1,121 1,084 1, ,000 9,733 7,905 7,000 6,005 4,878 4,319 3,962 3,662 3,508 3,379 3,322 3,218 3,127 2,975 2,925 2,050 2,745 2,655 2,523 30,000 7,000 5,686 5,035 4,319 3,508 3,106 2,850 2,634 2,523 2,430 2,389 2,315 2,249 2,139 2,104 2,050 1,974 1,909 1,815 40,000 6,421 5,216 4,618 3,962 3,218 2,850 2,614 2,416 2,315 2,229 2,191 2,123 2,063 1,963 1,930 1,880 1,811 1,751 1,665 60,000 5,686 4,618 4,089 3,508 2,850 2,523 2,315 2,139 2,050 1,974 1,940 1,880 1,827 1,738 1,709 1,665 1,603 1,551 1, ,000 4,878 3,962 3,508 3,010 2,445 2,165 1,986 1,835 1,758 1,694 1,665 1,613 1,567 1,491 1,466 1,428 1,376 1,330 1,265 10, , , , , ,000 14,959 12,151 10,759 9,230 7,497 6,639 6,090 5,629 5,392 5,194 5,105 4,946 3,457 4,572 4,496 4,380 4,219 30,000 10,759 8,739 7,738 6,639 5,392 4,775 4,380 4,048 3,878 3,735 3,672 3,558 3,457 3,288 3,233 3,150 3,034 40,000 9,870 8,017 7,098 6,090 4,946 4,380 4,018 3,714 3,558 3,427 3,368 3,263 3,171 3,016 2,966 2,890 2,783 60,000 8,739 7,098 6,285 5,392 4,380 3,878 3,558 3,288 3,150 3,034 2,982 2,890 2,808 2,671 2,626 2,559 2, ,000 7,497 6,090 5,392 4,626 3,758 3,327 3,052 2,821 2,703 2,603 2,559 2,479 2,409 2,291 2,253 2,195 2,114 10,000 23,611 19,178 16,981 14,569 11,833 10,478 9,612 8,884 8,511 8,197 5,795 7,807 7,587 7,216 30,000 16,981 13,793 12,213 10,478 8,511 7,536 6,913 6,390 6,121 5,896 5,795 5,615 5,457 5,190 40,000 15,577 12,653 11,203 9,612 7,807 6,913 6,341 5,861 5,615 5,408 5,316 5,151 5,006 4,761 60,000 13,793 11,203 9,920 8,511 6,913 6,121 5,615 5,190 4,972 4,789 4,707 4,561 4,432 4, ,000 11,833 9,612 8,511 7,302 5,931 5,251 4,817 4,453 4,266 4,108 4,038 3,913 3,803 3,617 10,000 29,919 24,302 21,518 18,461 14,995 13,278 12,180 11,258 7,757 10,387 10,211 9,893 9,614 30,000 21,518 17,478 15,476 13,278 10,785 9,549 8,760 8,097 7,757 7,471 7,344 7,115 6,915 40,000 19,739 16,033 14,197 12,180 9,893 8,760 8,036 7,427 7,115 6,853 6,737 6,527 6,343 60,000 17,478 14,197 12,571 10,785 8,760 7,757 7,115 6,577 6,300 6,068 5,965 5,779 5, ,000 14,995 12,180 10,785 9,252 7,515 6,655 6,104 5,642 5,405 5,206 5,117 4,958 4,818 10,000 37,489 30,450 26,963 23,132 18,789 16,637 15,261 10,145 13,513 13,015 12,794 12,396 30,000 26,963 21,901 19,392 16,637 13,513 11,966 10,976 10,145 9,719 9,361 9,202 8,915 40,000 24,733 20,090 17,789 15,261 12,396 10,976 10,069 9,307 8,915 8,587 8,441 8,178 60,000 21,901 17,789 15,751 13,513 10,976 9,719 8,915 8,241 7,894 7,603 7,474 7, ,000 18,789 15,261 13,513 11,593 9,417 8,338 7,649 7,070 6,773 6,523 6,412 6,213 10,000 52,628 42,747 37,851 32,473 26,377 23,356 15,409 19,803 18,971 18,272 17,961 30,000 37,851 30,745 27,224 23,356 18,971 16,798 15,409 14,243 13,644 13,141 12,918 40,000 34,722 28,203 24,973 21,424 17,402 15,409 14,135 13,065 12,516 12,055 11,850 60,000 30,745 24,973 22,112 18,971 15,409 13,644 12,516 11,569 11,082 10,674 10, ,000 26,377 21,424 18,971 16,275 13,220 11,706 10,738 9,925 9,508 9,157 9,002 Only the labyrinth seal ( seal) may be used the right of the heavy line. or applications in the dark shaded area, the maximum load for the specific speed is shown. The load does not correspond the 10 shown at the left. pplications in the light shaded area may require a high temperature lubrication, consult odge ngineering at (864) * IPRI - Type imensional ousing 22
23 Notes 23
24 aldor lectric ompany P.O. ox 2400 ort mith, R U... Ph: (1) aldor - odge 6040 Ponders ourt reenville, U... Ph: (1) aldor lectric ompany 3051 ll Rights Reserved. Printed in U. 05/15 Printshop 250
DURALINE BEARINGS N-1. DuraLine Features... N-2. Pillow Blocks... N-3 to N-6. Flange Blocks... N-7 to N-10. Flange Bracket Bearings...
URIN RIN uraine................................................. N-2 Pillow locks.................................................... N-3 to N-6 Flange locks...................................................
More informationINDUSTRIALINE MOUNTED BEARINGS
INUTRIAIN OUNT ARIN ounted earing Features Index... -1 Features Index... -4 ngineering and election all earing Units... -6 100 eries Pillow locks... -8 100 eries Flange locks... -10 100 & 200 eries oad
More informationMounted Spherical Roller Bearings
ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More information700 Series Double Reduction Worm Gear Reducers
700 eries ouble Reduction orm ear Reducers ection ontents roduct Reference uide... 68 umbering ystem / ow to rder... 68-7 election rocedure.... 7 ssemblies and ounting ositions... 72-75 Recommended ubricants...
More informationProduct Information / Order Code
Product Information / Order ode Order odes eries and Type low onitoring ystem G - 0.04 - - 1 - V - X G Version 0,002... 2 l/min / 0.0005... 0.53 U GP 0.02 0,004... 4 l/min / 0.0011... 1.06 U GP 0.04 0,01...
More informationDesign and Construction
ublication 940-711 ontents esign & onstruction page 1 Technical Information page 2 lange ixing Units page 4 olt ixing Units page 6 ase ixing Units page 8 Tube ixing & lamp ixing Units page 11 lide Units
More informationE920 Series Bearings. Locking Collars. Tapered Roller Bearing. Locking Collars. Rubber Contact Seal. Outer Race. One-Piece Cast Iron Housing
rowning E920 Series Tapered Roller earing rowning 920 series mounted tapered roller bearings feature one-piece durable cast iron non-expansion housings with Type E mounting dimensions and limited misalignment.
More informationTighteners and Idlers
Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission
More informationManufacturer of precision helical gear pumps for a wide range of industrial applications
Manufacturer of precision helical gear pumps for a wide range of industrial applications Made in the U our series of versatile helical gear pumps for moving both low and high viscosity liquids PUMP U 2
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationBearing Reference CONTENTS. Guide S-2000
ONTENTS Features / Benefits... B12-2 Specifications........................................................... B12-4 How to Order... B12-4 Nomenclature...........................................................
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationMade in the USA INDUSTRIAL BUCKET ELEVATORS
ade in the U UL U LV U : o provide innovative quality solutions that create an extraordinary customer experience. UGL HG L L P G LV HG LG H P High tandard imensions Gauge tandard High apacity odel odel
More informationValvair II. Solenoid Operated Directional Spool Valves. Section E.
(evised 04-05-2012) olenoid Operated irectional pool Valves ection www.parker.com/pneu O IT OT OU. 227 www.comoso.com arker annifin orporation neumatic ivision X odular egulators... 244-245 ccessories...
More informationF15 Ferra Series Hydraulic Pumps Concentric AB
F15 Ferra eries Hydraulic Pumps oncentric Innovation in Hydraulics ERIPION, FEURE N ENEFI oncentric F series gear pumps have an outstanding history in mobile off-highway applications. he F15 is the latest
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationSelection of Gear Box
orm Speed educers Selection of ear ox or ood performance of ear ox, The right selection is very important. The ear Unit Selection is made by comparing actual transmitted loads with catalogue ratings are
More informationPipe Supports PS 1. PO Box Highbrook Auckland
1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6
More informationParts. Cyclo BBB5 Reducer. Cyclo BBB5. 34 Operation & Maintenance Manual Cyclo BBB5. Figure 31. Cyclo BBB5 Reducer Parts
Parts Reducer Figure 31. Reducer Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 24 23 21 19 18 17 16 22 20 Table 30. Reducer Parts Number escription 1 BBB5 Assembly 2 Ring Housing Pins 3 Ring Housing Rollers
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
More informationMulti-Power Cylinders
ulti-power ylinders vailable in series ore sizes /" thru " trokes /8" thru " Original eries (shown right) ores -/8" thru " trokes /" thru " orces to,000 lbs. ( tons!) Pancake eries (see pages. to.7) ores
More information( ) x ( ) SELECTION. IMPERIAL - IP and ISAF Spherical Roller Bearing GENERAL
IMPERIAL - ISAF UNIFIED Plummer Sleeve Bearing SLEEVEOIL SELECTION DODGE Spherical Roller Bearings have the capacity carry heavy radial loads and combined radial and thrust loads. The maximum recommended
More informationIdler-Rollers and Load Rails for high-capacity load handling. High Performance
Idler-s and oad ails for high-capacity load handling High Performance OO ITETIO GOUP Through out this omprehensive atalogue Osborn International offers customers the opportunity to access this wide range
More informationDRIVELINE CATALOG DRIVELINE DIVISION
RIVIN IVISION RIVIN TOG ertified Power Inc. - riveline ivision 390 Koopman ane, lkhorn, WI 53-00 Tel: 6.74.5600 ax: 6.73.785 -Mail: driveline @certifiedpower.com WG 5479- OPYRIGHT 006 RTII POWR IN. - RIVIN
More informationHELICAL BEVEL DRIVES K-1
K ELIAL EVEL RIVES elical evel Product eatures......................................k1 to K3 Selection Procedure............................................ K4 to K5 escriptions.....................................................
More informationValve Products. B Series Valve
atalog 000- arker neumatic Valve, an exceptional performing industrial valve in a compact size with an enhanced flow range. vailable in solenoid pilot operated and remote air pilot models. he series features
More information1-14 Fittings and Accessories
-4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationTitan Flow Control, Inc. Your pipeline to the future!
TITN Titan Flow ontrol, Inc. Your pipele to the future! eries F 75 Wafer > ast Iron eries F 76 ug > uctile Iron esigned accordance with: M--67 & I 609 olor oded: Orange ody is M eat lue ody is una-n eat
More informationAmphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
More informationISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
More informationHELICAL BEVEL DRIVES K-1
ELIAL EVEL RIVES K elical evel Product eatures...k2 to K3 Selection Procedure... K4 to K5 escriptions... K6 Mounting Positions... K7 Model Selection Index... K8 Selection y Input P... K9 to K21 Integral
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More information"F" Series MGS Reducer Round Flange "F" Housing Shaft Output Dimensional Data
Round Flange "F" ousing Shaft Output imensional ata Y X L P V U UA G Y Y YA Q U 1 U M A rawing for Units F102VF F603VF O N J ia. on F olt ircle T Table No. 1 "F" Series Round Flange imensions (Inches)
More informationSection Contents. Product Reference Guide Numbering System / How To Order & 16. Selection Procedure... 17
Section ontents roduct Reference uide... - umbering System / ow To Order... 4 & 6 Selection rocedure.... 7 ssemblies and ounting ositions... 8-9 Recommended Lubricants... 0 R Selection Tables..................................................
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Spherical Roller earings Units: Rexnord PT Select Series Contents Page eatures and enefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow locks 198 lange locks 202 Industries Served Aggregates
More informationINTERNAL GEAR: STAINLESS STEEL HYGIENIC PUMPS SERIES DESCRIPTION OPERATING RANGE: NOMINAL FLOW RATES: Section 230 Page 230.
INTRNL R: RI 157, 4157, 257, 4257 age 230.1 Issue RI RITION ORTIN RN: iking s Hygienic eries positive displacement pumps are designed to conform to International standards for sanitary processing of foods,
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationIndustrial and Off-Highway Americardan Universal Driveshafts
A T R A I N D U T R I A M O T I O N Industrial and Off-Highway Americardan Universal Driveshafts Altra Industrial Motion Ameridrives designs, sources, manufactures and tests a complete driveshaft product
More informationEP Series Electro Pack
P Series lectro Pack ase ounted lutch/rake ombinations in a Rugged ousing T UTOO T eets electrical codes U isted eavy duty bearings Properly aligned for maximum performance. rake output shaft lutch input
More informationHigh Thrust Air Cylinders. Catalog HP/MP
igh hrust ir ylinders atalog P/P Product Index i-power eries Page onstruction & engineering data......, ow to Order....................... 5 imensions...................... 6, 7 Option pecifications..............
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More informationEngineering & Dimensions TAKE-UP FRAMES
Engineering & imensions TAKE-UP RAME PRECIION PULLEY & ILER ALL RIGHT REERVE 2 PRECIION PULLEY & ILER ALL RIGHT REERVE TALE O CONTENT Take-Up Interchange... 4, 5 Precision Heavy uty (PH).... 6, 7 Precision
More informationDECK FITTINGS DECK FITTINGS
ITTINS ITTINS TS R ONY SMP O SOM TYPS VI. MNY OTRS IN STO. T US NOW YOUR RQUIRMNTS! STOS IN T WST OST N T U. WWW.WTRMNSUPPY.OM MI PON X ITTINS SIN POINT MOORIN RRNMNT OR SIPS These requirements are applicable
More informationVAL /2, 5/2, 5/3, and 2 x 3/2 Directional control valves. 3-Port and 5-Port Air Pilot Valves
6-6 eries /, /, /, and x / irectional control valves igh flow rate xtensive manual override options Manifold system with easy assembly ow power consumption Maintenance-free echnical data Medium: ompressed
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationDimensional Comparison Table (PX8 vs PX9)
imensional omparison able (X8 vs X9) 1 / 9 his sales manual shows comparison data of previous series and aramax 9000 series. tilize this manual when the previous gearbox is replaced by aramax 9000 series.
More informationRX Rotary Union For water, air, and thermal oil service
RX Rotary Union For water, air, and thermal oil service dvanced rotary unions for fluid and air service. Engineered reliability for demanding applications. RX Rotary Union Overview of the RX Rotary Union...
More informationHOW TO ORDER SPECIAL FINISHES
HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offerings have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.
More informationR100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives
R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationIsys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
More informationFeatures. IX SeriesTM. Features. IP65 sealing Roller screw provides 15X life of ball screw Low backlash. IM SeriesTM. Features
xlar I Series Linear ctuator xlar I Series TM actuators present a new range of alternatives for linear motion solutions. The I Series actuators offer all of the benefits of xlar s planetary roller screw
More informationC-SERIES Rotating Screw Jack 100kN
-SRIS Rotating Screw Jack 100kN MR100 olumn Strength ree Pinned uided ixed Pinned ixed PRMISSI OMPRSSIV O (K) 1.2.10 4 1.1.10 4 1.10 4 9000 8000 7000 6000 5000 4000 3000 2000 1000 OUMN NTH (mm) 0 IX/UI
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationCONTENTS. IMPERIAL - IP, ISAF and ISN
CONTENTS IMPERIAL - IP, ISAF and ISN Features / Benefi ts IMPERIAL.......................................................... B10-3 IMPERIAL-E........................................................ B10-8
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationSERIES HYDRAULIC MOTORS
ERIE HYDRULIC MOTOR overview The eries motor is the leader in its class, offering high efficiency and durability. The three-zone orbiting valve, laminated manifold and Roller tator motor work harmoniously
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationCONTENTS. Type E/DOUBLE-INTERLOCK /Type K/TAF
ONTENTS Type E/DOUBE-INTEROK /Type K/TF Features / Benefits Type E....................................................... B6-3 DOUBE-INTEROK & Type K.................................. B6-5 TF.........................................................
More informationEccentric Collar Ball CONTENTS. Bearing
CONTENTS Specialty Tapered Features / Benefits Type C...B11-2 Special Duty, Hinged Cap.......................................... B11-3 ll Steel...B11-4 Specifications Type C...B11-5 Special Duty, Hinged
More informationJ&M Manufacturing. Premium Seed Tenders. Their Upgrades. Standards. Our MODELS LC290 LC390 LC C4 50
J&M Manufacturing Premium Seed Tenders Their Upgrades Our Standards MOLS L290 L390 L535 2 50 4 50 4 50 L Series SpeedTenders The new L Series Speed Tenders offer improved features to maximize your planting
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationProduct Brochure. Dodge ISN bearings
Product Brochure Dodge ISN bearings We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes over the total lifecycle
More informationBVA Limited Lifetime Warranty
1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and
More informationValve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
More informationDuroFlow Industrial Series. Positive Displacement Blowers & Vacuum Pumps
uroflow Industrial eries Positive isplacement Blowers & Vacuum Pumps 2 The Gardner enver uroflow Family of Products For nearly fifty years, Gardner enver uroflow positive displacement blowers/ vacuum pumps
More informationPole Basics January, 2008
Pole asics Table of ontents Available Poles... Page 2 olt-on rackets... Page 3 Tenon ount rackets... Page 4 Internal Slipfitter... Page 5 Handhole overs... Page 5 Pole aps... Page 5 Anchor olts... Page
More informationEngine Driven Products
Engine riven Products ore Values 1. We respect each other, our community and the environment. 2. We are ethical and honest in all of our business dealings. 3. We are diligent in protecting the safety of
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationPULSA GLM ENGINEERED PRODUCTS. Mechanical Diaphragm. Max Flow: to 3,200 LPH (845 GPH) Pressure: 12 bar (175 psi) Temperature: 0-45 C ( F)
Max low: to 3,200 LP (845 P) Pressure: 12 bar (175 psi) Temperature: 0-45 (32-113 ) ccuracy: +/- 2% of Set Point PULS LM Mechanical iaphragm Metering Pump Mechanical iaphragm Metering Pump Pulsafeeder
More informationHigh-Speed Precision Bearings
igh-peed Precision Bearings ROBUT eries ROBUT eries was developed using NK s material, evaluation, and analysis technologies to improve the performance of machine tools. Building on the new technologies
More informationOSP. General Purpose Jacks - Plain Ram, Single Acting (Type - Spring Return) Features / Application Multipurpose jacks.
OSP General Purpose Jacks - Plain Ram, Single cting (Type - Spring Return) 5-400 ton Stroke 50-00 mm ax. Working Pressure 700 bar ultipurpose jacks Gland Nut designed to withstand dead end load ase mounting
More informationDodge ISN mounted spherical roller bearings
Engineered for reliability and long life Easy to install and remove Factory sealed and greased Patented sealing system for extended life Patented integral adapter mounting and dismounting system No shaft
More informationSeries Progressive Lubrication System. IntrafloProducts.com
ntrafloproducts.com eries Progressive Lubrication ystem able of Contents ntro to eries Progressive Lubrication ystem Page 2 40 eries Valves Cycle ndicator Pin ncluded Page 3 Cycle ndicator Pin ot ncluded
More informationResilient Seat Butterfly Valve with Electric Actuator Two-Way and Three-Way
Resilient Seat utterfly with Electric ctuator ocument o. 15-030 escription utterfly assemblies provide excellent flow control of hot water, chilled water, condenser water, thermal storage systems, and
More informationFeatures And Benefits.IMPERIAL... B14-2.IMPERIAL-IP... B14-4.IMPERIAL-HD... B14-6 ISAF-HYD... B14-10.ISN / ISNX-HYD... B14-12
CONTENTS - IP, ISAF and ISN Features And Benefits..................................................................... B14-2.-IP... B14-4.-HD... B14-6 ISAF-HYD...................................................................
More informationPress Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationQPL Qualified Product CATALOG
Q Qualified roduct TO ext3 eavy uty ylindrical onnectors I-T-22992, ext3 lass eavy uty onnectors are ruggedly constructed and tested to stand up to the rigors of unforgiving environments. This class represents
More informationVic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationAmphenol Heavy Duty Cylindrical Connectors
mphenol eavy uty ylindrical onnectors 12-052-9 mphenol Inside over is lank able of ontents age mphenol eavy uty ylindrical onnectors, I--22992/roprietary esign haracteristics, nvironmental esting................................................................
More informationH-TLC Adjustable Torque Limiters. Torq-Tender Mechanical Torque Limiters
Torq-Tender echanical Torque imiters -TC djustable Torque imiters Torq-Tenders... For ccurate verload Protection n echanical Power Transmission Systems Torq-Tenders are positive drive couplings which provide
More informationPower Clamp Cylinder
ower lamp ylinder onforming to the ew S Standard Series Z2 ompliant ew Special /()U or rance ZR or urope ZT or orth merica Z2 2T/2/ () or sia 2 ourtesy of Steven ngineering, nc.-2 Ryan Way, South San rancisco,
More information4100 SERIES. Specifications: Applications:
400 ERIE pecifications: Widths up to 2 (05) engths up to 6 (,829) The (25) diameter drive pulley. oad capacity up to 80 lbs.* (6kg). elt speeds to 255 ft./min. (78 M/min.). pplications: Metal Forming Metal
More informationPower Generation. Solenoid & Air Operated Valves
Power Generation Solenoid & ir perated Valves ompany Information... Quality Standards & eatures... Safety elated Way Valves... 4 Safety elated Way Valves... 6 Safety elated 4 Way Valves... 8 Safety elated
More informationIndex MANUAL SPRING MOTOR EXTRAS. +44 (0) or visit Fuel Hose Reels. Fuel Hose Reels. Fuel Hose Reels.
Index SPRIN L ompact Hose Reels Hose I.. 6 mm - 10 mm Pressure 21 R P Performance Hose Reels Hose I.. 6 mm - 12 mm SH, MP & HP Heavy uty Hose Reels Hose I.. 6 mm - 19 mm Pressure 350 R Pressure 350 R T
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationHeating Cable. Ordering Information SRL-C SRL-CR, CT SRP-C, SRP-CT CWM-C CWM-CT SRL-MC SRL-MCR, MCT SRM/E-C SRM/E-CT SRL-C SRL-CR, CT SRP-C, SRP-CT
L & L eries onnection ccessories L eries Re-usable omponents Through-the-nsulation Mounting Provides High Visibility asy ccess for Maintenance RTP RTT RT L eries Low Profile Provides asy nstallation of
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationStandard Products Catalog
Standard Products atalog nduction Permanent Magnet rushless Right ngle earmotors s ontrols Upgraded 3-Phase s! pages 8 bodine-electric.com S-17a 4 3 4 14.0/11.0 2.378 SQ MX 3 5.522 MX.554 2 1.56±.06.5000
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationCOMPACT REELS FOR BOOSTER HOSE To handle single 3/4" I.D. or 1" I.D. hose.
OMPT RLS OR OOSTR OS To handle single 3/4" I.. or 1" I.. hose. hoose direct crank rewind (removable) or chain and sprocket drive powered by electric, hydraulic or compressed air motor. Power rewind supplied
More informationSUB-BASES and MANIFOLDS for ISO 5599/I VALVES
- and for 99/ - and Z ide ottom ort izes ize orted 69 orted,,, /, 6000 699 / / 6000 / / 69 600 600 69 600 600 69 6609 669 /8 /8 /8 / / / / /8 /8 /8 / / / / n addition to the manifold stations, an end station
More information