DRIVELINE CATALOG DRIVELINE DIVISION
|
|
- Ann O’Connor’
- 6 years ago
- Views:
Transcription
1 RIVIN IVISION RIVIN TOG ertified Power Inc. - riveline ivision 390 Koopman ane, lkhorn, WI Tel: ax: Mail: WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page of 9
2 J S ompanion langes J H S - Standard lange G S - Standard arge Item Style # Style # Style # 3 Style # 4 escription Series Style # Number of olts Thread Size 3/8-4 7/6-0 /-0 3/8-4 3/8-4 7/6-0 5/8-8 Outside iameter olt ircle Pilot iameter Pilot epth Maximum ore (S) Maximum ore (S) Maximum Keyway (S) 3/8 x 3/6 / x /4 5/8 x 5/6 3/4 x 3/8 x / x / -/8 x 9/6 Maximum Keyway (S) 5/8 x 5/6 3/4 x 3/8 x / -/8 x 9/6 -/4 x 5/8 -/4 x 5/8 -/4 x 5/8 G lange Width H Hub iameter J ength (S) J ength (S) Rough ore ia (S) Rough ore ia (S) verage Weight in bs (S) verage Weight in bs (S) * ustom langes Quoted Upon Request WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page of 9
3 J IN ompanion langes J H S - Standard lange G S - Special arge lange Item Style # Style # Style # 3 escription Series Style # or Number of olts 8 or Thread Size 5/8-8 5/8-8 8mm-.5 0mm-.5 mm-.5 mm-.5 4mm-3.0 Outside iameter olt ircle Pilot iameter Pilot epth Maximum ore (S) Maximum ore (S) Maximum Keyway (S) 7/8 x 7/6 x / -/4 x 5/8 -/ x 3/4-3/4 x 5/8 x /6 -/4 x 3/4 Maximum Keyway (S) x / -/ x 3/4 -/ x 3/4 x /6 -/4 x 3/4 -/4 x 3/4 -/ x 3/6 G lange Width H Hub iameter J ength (S) J ength (S) Rough ore ia (S) Rough ore ia (S) verage Weight in bs (S) verage Weight in bs (S) WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 3 of 9
4 riveshaft imensional ata - S Units riveshaft Type(s) S Series I escription Outside iameter in ll Pilot iameter in ll Swing iameter in ll Joint enter-lange ace in S, S Tube ia. (Standard) in S, S Wall Thickness (Standard) in S, S Tube ia. (Special) in S, S Wall Thickness (Special) in S, S Max. Joint ngle deg's S S G Steady earing ength in S H Steady earing iameter in S J lange ength in S S K Total Slip ength in S Standard Mid-Slip ength** in S 4, 36, or 48 8, 36, or S Standard Minimum ollapsed in S ength S MIN WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 4 of 9
5 riveshaft imensional ata - S Type: S (Standard riveline) Type: S (Short oupled riveline) Type: S (Steady earing riveline) K G J K H WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 5 of 9
6 riveshaft imensional ata - IN IN Series I escription Units Outside iameter in ll Pilot iameter in ll Swing iameter in ll Joint enter-lange ace in ll Tube iameter in ll Wall Thickness in ll Max. Joint ngle eg's ll Pilot epth in ll lange Width in ll olt ircle iameter in ll olt iameter in ll Standard Number of Holes in ll earing iameter in ll K Total Slip ength in Minimum ollapsed ength in riveshaft Type(s) S S S S WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 6 of 9
7 riveshaft imensional ata - IN Type: S (Standard riveline) Type: S (Short oupled riveline) Type: S (Steady earing riveline) K G J K H WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 7 of 9
8 Pillow lock Steady earings Shaft Part Shaft imensions olt Weight Series Number ia h a e b s s g w i n Size (lbs) 30, 350 UP /6 -/6 6-/ 4-3/4-7/8 /3 3/6 3/3 3-9/ / UP /6-7/8 6-9/6 5-7/8 /3 3/6 3/4 3-/ / UP09-7 -/6 -/8 7-/ 5-3/4 -/8 /3 7/8 5/3 4-/ / , 60 UP0-3 -5/6 -/4 8-/8 6-/4-3/8 5/3 7/8 4-/ / UP-35-3/6 -/ 8-5/8 6-3/4-3/8 5/3 7/8 4-3/ / UP-39-7/6-3/4 9-/ 7-/4-3/4 5/3 5-7/ / , 5 UP /6 3-/4 0-3/6 8-/ -5/6-7/3-3/3 6-3/ / UPX / /8 4 -/6-5/6 -/3 7-5/ / lange Steady earings Shaft Part Shaft imensions olt Series Number ia a e i g l s Z i n Size 30, 350 U /6 4-/4 3-/ /6-7/3 5/ /8 40 U /6 4-5/8 3-5/ /8 -/3 35/ / 480 U09-7 -/6 5-3/8 4-/ /3 -/ 5/ / 550, 60 U0-3 -5/6 5-5/8 4-3/ /3-9/6 5/ / 70 U-35-3/6 6-3/8 5-/ /3 -/6 3/ /8 80 U-39-7/6 6-7/8 5-5/8.4 5/3-7/8 3/ /8 80, 5 U /6 7-7/8 6-/ /6-7/3 3/ /8 50 UX /6 8-7/6 6-3/ /6-3/4 9/ /4 Weight (lbs) WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 8 of 9
9 ubrication very driveline needs a proper lubrication schedule to nsure maximum bearing life and optimum performance.. ross & bearings and telescoping slip-spline must be ubricated prior to installation to avoid premature failure.. or cross & bearings and steady-bearings use only grease which meets or exceeds an NG grade # with an P (extreme pressure) additive. Shell lvania P- is sufficient in this circumstance. 3. or slip-spline member it is recommended to use a long fibrous extreme pressure (P) grease satisfying NG # or # such as Texaco Multifak P. 4. ddition of lubricant to cross & bearing should only be done until grease appears at all four bearing seals. If all four bearing caps do not purge, try moving u-joint back and forth in all directions to loosen up the seal and regrease. t slip-spline member grease should appear at pressure relief hole when full. 5. Shaft support bearings are prepacked by the bearing supplier and require no additional lubrication. ollow manufacturers recommended lubrication intervals when greasing support bearings. Upon lubricating support bearings use only a.8oz charge (three hand pumps of grease gun) unless told otherwise. 6. ubrication schedules should follow these simple recommendations. Grease U-joints every 500 hours of normal service or every 00 hours of continuous service. xtreme conditions such as high temperatures, corrosive environments or severe shock loading may require special grease and/or intervals. The slip-spline should be lubricated each time the U-joints are serviced. Transport and Storage To ensure your drivelines are safe from shipping and storage follow these guidelines.. Upon receiving your drivelines perform a thorough examination of all equipment before installation. Note any damage to shafting right away and contact the freight carrier with complaints.. ll transport and storage should be in a horizontal position. Never stack driveline crates or objects on crates. 3. ong-term storage requires shafting to be protected from the elements and all machined surfaces sprayed with a rust inhibitor monthly. WG OPYRIGHT 006 RTII POWR IN. - RIVIN IVISION, KHORN, WI Page 9 of 9
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationE and VE Construction
E and VE Construction E Element VE Element Type E and VE elements combine rugged design and rigid construction features which make them ideal for moderate to heavy duty clutch and brake service. They are
More information"F" Series MGS Reducer Round Flange "F" Housing Shaft Output Dimensional Data
Round Flange "F" ousing Shaft Output imensional ata Y X L P V U UA G Y Y YA Q U 1 U M A rawing for Units F102VF F603VF O N J ia. on F olt ircle T Table No. 1 "F" Series Round Flange imensions (Inches)
More informationBVA Limited Lifetime Warranty
1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and
More informationThe BVA Advantage. Confidence Built on Quality
1 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift,
More informationProduct Information / Order Code
Product Information / Order ode Order odes eries and Type low onitoring ystem G - 0.04 - - 1 - V - X G Version 0,002... 2 l/min / 0.0005... 0.53 U GP 0.02 0,004... 4 l/min / 0.0011... 1.06 U GP 0.04 0,01...
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationContents. BlackStar Bushings. BlackStar Bushings. 1
Contents Blacktar s Blacktar s Q tyle s............................................................. T s................................................................. plit Taper s...........................................................
More information8146 Series F16 CONTROLS CONTROL STATION IN POLYESTER RESIN. Features: Components:
8146 Series ONTROLS ONTROL STTION IN POLYESTER RESIN LSSIFITIONS NE- lass I, Zones 1 & 2 Ex e II T6 lass I, ivision 2, Groups,,, lass II, ivision 2, Groups F,G lass III NEM 3,4 & 4X; IP66 LISTE - FILE
More informationC-SERIES Rotating Screw Jack 100kN
-SRIS Rotating Screw Jack 100kN MR100 olumn Strength ree Pinned uided ixed Pinned ixed PRMISSI OMPRSSIV O (K) 1.2.10 4 1.1.10 4 1.10 4 9000 8000 7000 6000 5000 4000 3000 2000 1000 OUMN NTH (mm) 0 IX/UI
More informationDriveline Service & Maintenance
Section 3-3 Driveline Inspection Driveline Service & Maintenance To prevent serious eye injury, always wear eye protection gear when you perform vehicle maintenance or service. Do not service a drivehsaft
More informationC D. M-Fan Galv. Crate Housing, guards. Fan Dia. 18" 18" 24" 24" 36" 36" 36" 36" 48" 48" 48" 48" 48" 48" " 23" " 29" " 43"
18" - GROWER 'M' and 'H' Fans Each arton Includes: 1-18",, or Direct Drive or Belt Drive 1 - Hardware Package (HP1044) for 'M' fan only 2-5 /16" - 18 x 2" losed Eyebolts with nuts 2-5 /16" - 18 x 2" Nylock
More informationDesign and Construction
ublication 940-711 ontents esign & onstruction page 1 Technical Information page 2 lange ixing Units page 4 olt ixing Units page 6 ase ixing Units page 8 Tube ixing & lamp ixing Units page 11 lide Units
More informationMTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationCurrent-limiting fuse mounts
Fusing quipment atalog ata 132046N Supersedes November 2015 urrent-limiting fuse mounts OOPR POWR SRIS eneral aton provides overload protection for all indoor and underground cable distribution systems
More informationPiston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More information4836 Catalina Shower Pan
4836 atalina Shower Pan TNIL SPIITIONS imensions Weight (mpty) Overall imensions (L) x (W) x () rain Location Total Weight (loor Loading). Overall Width. Overall epth (Includes Nailing lange). rain Rough-In
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationSKF Power Transmission products
SK Power Transmission products 100 ouplings rid couplings................ 104 ear couplings................ 109 SK lex couplings............. 119 SK lex spacer coupling........ 121 hain couplings...............
More informationS-SERIES Translating Screw Jack 50kN
Translating Screw Jack 50kN Performance ST050 Screw Jack Model 4 S-050 apacity kn 50 ead Screw 1 iameter (mm) 40 ead (mm) 9 18 Option 1 6:1 ear Ratios Option 2 24:1 Option 3 8:1 (OR) 4 x Turns of worm
More information700 Series Double Reduction Worm Gear Reducers
700 eries ouble Reduction orm ear Reducers ection ontents roduct Reference uide... 68 umbering ystem / ow to rder... 68-7 election rocedure.... 7 ssemblies and ounting ositions... 72-75 Recommended ubricants...
More informationComponents. Installation Guidelines
omponents Tubular eaters esign & Installation Guidelines esign onsiderations Material For resisting corrosion inherent in the process or environment and for withstanding the sheath temperature required
More informationSINGLE ACTING TELESCOPIC
SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order
More informationDURALINE BEARINGS N-1. DuraLine Features... N-2. Pillow Blocks... N-3 to N-6. Flange Blocks... N-7 to N-10. Flange Bracket Bearings...
URIN RIN uraine................................................. N-2 Pillow locks.................................................... N-3 to N-6 Flange locks...................................................
More informationDisconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationThe right chain! Approved Performance from Rexnord. Conveyor chains W-Series. MODULE_11/GB/2014/02 // No liability accepted for misprints or errors!
pproved Performance from Rexnord Conveyor chains W-Series Conveyor chains - W-Series pproved Performance from Rexnord. Fulfils NSI quality requirements Link plate Carbon steel Pin Carbon steel, press fit
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationPiston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
More informationBulkhead Connections for Series B 1326 Cables
nstallation nstructions ulkhead onnections for Series ables atalog Numbers -U-, -U-L, -UT-L, -UT-, -P-, -P-L, -PT-L, -PT-, -P-, -P-L, -PT-L, -PT- bout This Publication This publication contains installation
More informationLooking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationInstallation, Operation and Maintenance Manual
ocument 483064 Models SQ-M and SQ-M entrifugal Inline Fans Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting
More informationValve Products Directair Valve Series
atalog 000- arker neumatic irectair alve eries rass oppet / liding eal - eries ockout alves eatures irectair, /8" valves oppet style.7 v conomical -way normally closed function irectair, /8" valves acked
More informationTORQUE LIMITERS TORQUE LIMITER COUPLINGS
TORQU LIMITRS TORQU LIMITR OUPLINGS TORQU LIMITRS n adjustable friction type overload protection device which can be set to slip at a predetermined torque loading and will automatically re-engage when
More informationS ELF-CLINCHING S TANDOFFS
S EF-INING S TANOFFS SEF-INING STANOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin
More informationEngine Driven Products
Engine riven Products ore Values 1. We respect each other, our community and the environment. 2. We are ethical and honest in all of our business dealings. 3. We are diligent in protecting the safety of
More informationNorth. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve
North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationFIBERLIGN Suspension for OPGW
IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5. Insert (for OPW only) iberlign Suspension
More informationSTOCK MITRE GEARS 1.5MOD 4.0MOD 32DP 3 DP STOCK BEVEL GEARS 1.5MOD 4.0MOD 12DP 6DP
STOK ITRE GERS 1.5O 4.0O P 3 P STOK EVE GERS 1.5O 4.0O P P amira Street South ustralia, 50 Phone: (0) 34 5522 ax: (0) 34 511 e-mail: hercus@hercus.com.au Website: www.hercus.com.au STOK ITRE GERS PITH
More informationControl and Automation
onsumer & ndustrial Power Protection ontrol and utomation or industrial applications.03 imagination at work Plug-in relays and uxiliary contactors Motor protection devices ontactors and Thermal overload
More informationSELF-CLINCHING STANDOFFS
SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM
More informationOPERATION MANUAL MYCO SELF INDEXING UNIT. Clearstream Filters Inc. 57 Arnold Sayeau Dr. Delhi, ON, N4B 2W9 Tel Fax
OPERATION MANUAL MYCO SELF INDEXING UNIT Clearstream Filters Inc. 57 Arnold Sayeau Dr. Delhi, ON, N4B 2W9 Tel. 519.582.8446 Fax. 519.582.1936 www.clearstreamfilters.com Table of Contents SECTION 1 System
More informationJERGENS SPECIALTY FASTENERS TRUE LOK TOGGLE CLAMPS
JRNS SPITY STNRS TRU O TO MPS Right lamp. Right Value. True-ok. WOROIN SOUTIONS SPITY STNRS ITIN SOUTIONS 2015 jergens, inc. IM1115 15700 S. Waterloo Road. leveland, O 44110-3898 866.594.5565 jergensinc.com/spitystnrs
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationSold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099
Table of ontents Pages esign onsiderations to Linear earings, Pillow locks and arriage ssemblies 7 to 3 Precision ing, Supports and ssemblies 37 to 5 Terms of Sale Inside ack over LINTH Standard Positioning
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationTorque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
Torque Torque Sensor ini-smart Torque Sensor 4502... 4502... torque sensors operate on the strain gage principle and supply an analog output signal of ±0... 5 V which is contactless transferred. vailable
More information400 Series Profile Rail Linear Guides
400 Series Profile inear uides Transport grade ball profile rail system www.thomsonlinear.com EECTROMTE Features and enefits The 400 Series Profile inear uide is the newest addition to the Thomson inear
More informationVehicle Fitment Guide Please complete the Vehicle Fitment Guide in its entirety and either or Fax to Billet Specialties.
Vehicle itment Guide Please complete the Vehicle itment Guide in its entirety and either mail or ax to illet Specialties. mail: nfo@illetspecialties.com ax: 708-588 - 7181 USTOMR ORMTO: ame: Phone: ax:
More informationSurge Arresters. Surge Arrester/Type L Fuse Cutout Combination. Description. Construction. Connectors/Brackets
Surge Arresters Surge Arrester/Type L use ombination Electrical Apparatus 235-26 escription ooper Power Systems surge arrester/type L interchangeable fuse cutout combinations are available in a wide variety
More informationTECHNICAL SPECIFICATIONS. AD Retarder. OC442066/b 11/2000 1
TEHNIL SPEIITIONS 5 9 Retarer O66/b / 5 9 General speifiations Ientifiation oe N : B B 5 9 Variant oupling inex Voltage inex = V = V Speifiations M SS Total : 5 kg/ 75 lb Rotors : 9 kg/ 86 lb Stator :
More informationThe right chain! Approved Performance from Rexnord. Double pitch roller chains. MODULE_05/GB/2014/08 // No liability accepted for misprints or errors!
Approved Performance from Rexnord Double pitch roller chains Double pitch roller chains Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered
More informationCentrifugal Fans. Issue Date: Rev. Date: INSTALLATION, OPERATION & MAINTENANCE MANUAL. Lifting Lugs. Lifting Lugs
INSTLLTION, OPERTION & MINTENNCE MNUL Centrifugal Fans ENGINEERING SUPPLEMENT ES-52 Issue Date: 1-1-94 Rev. Date: 1-24-01 Contents Introduction................................... 1 Shipping and Receiving..........................
More informationENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X
uy Online at www.uynerpac.com nerpac ydraulic s & Lifting Products NRPC hydraulic cylinders are available in hundreds of different configurations. Whatever the X I W bending, holding whatever the force
More informationTech Note Truck 14 & 15.5 Twin Plate Cast Iron Type Installation Guidelines
1. (14 & 15.5 ) Check condition of the flywheel. Grind to resurface or replace flywheel. Surface MUST BE machined or premature clutch failure can occur. Flywheel depth must be 2.938 (74.62mm) for 14 (350mm)
More informationHAM-LET POSITIONABLES ELBOW & TEE
H POSOBS BO & PROUCS UP POSOBS PR S J26 S 16142 769 OB BO UB O S/S SRGH HR BOSS (POSOB)* 1 ** nformation ube O.. S/S 769OB SS 1/4 X 7/1620 769OB SS 1/4 X 9/1618 769OB SS 3/8 X 9/1618 1/4 6.35 7/1620 0.
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationSuper CB Series Clutch/Brakes
Super Series lutch/rakes Long Life, High Performance esign The Super Series lutch/rakes function in the same manner as the standard Series. The major advantage of the Super Series is extraordinary long
More informationModels 1800/2000 Regulators Data Sheet
S86 M Quality System QMI is ccredited by: ISO 900 ertified utch ouncil for ccreditation Models 0/000 Regulators ata Sheet vailable Models 0 Series low pressure models have a maximum inlet pressure of and
More informationRoller chains European type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains European type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationType 4502A... torque sensors operate on the strain gage principle and supply an
R5 4502 PPT Smart (integral measuring electronics) nterference resistance due to active torque output (±5 V), electrically isolated from supply and measuring signal on-contact signal transfer Unipolar
More informationRoller chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains American type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationLX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.
Hydraulic Oil, Manifolds and Fittings Shown top to bottom: HF-, HF-, HF-2, LX-, 6, and FZ Enerpac System omponents HF Oil power pumps efficiency - prevents cavitation - anti-sludge, anti-rust, anti-foam
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationTorque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
Torque Torque Sensor ini-smart Torque Sensor 4502... 4502... torque sensors operate on the strain gage principle and supply an analog output signal of ±0... 5 V which is contactless transferred. vailable
More informationPRODUCT MANUAL GEARCAGE SYSTEM - ASSEMBLY, INSTALLATION, AND OPERATION INSTRUCTIONS: Description
Gearage -FP6 Hitch Rack TwinTube ased Slide-Out Mounting System PROUT MNUL Installation & Safe Use Operation Highlights Fits 2 size receiver hitches. Rated for 300 lbs of cargo payload. lass II minimum
More information2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
More informationKEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
More informationOpmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1
Opmaak_V_Catalog_2007.qxp 4/16/2008 12:32 PM Page 1 2008 Opmaak_V_Catalog_2007.qxp 4/14/2008 3:36 PM Page 2 Index Single cting Cylinders 3 Lock-nut Cylinders 6 Threaded Cylinders 7 Flat ody Cylinders 8
More informationRMF Rolling Media Filter Operation & Service Manual
8 L-4205 RMF Rolling Media Filter Operation & Service Manual 580 West Park Road Leetsdale, PA 15056 ph. 724.318.1100 fax 724.318.1200 An ISO 9001:2008 Certified Company www.schroederindustries.com 580
More informationNeedle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure. Pressures to 15,000 psi (1034 bar)
Needle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 Parker utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationES-52. Contents. Handling. Introduction. Shipping and Receiving. Issue Date: Rev. Date:
INSTLLTION, OPERTION & MINTENNCE MNUL Centrifugal Fans ENGINEERING SUPPLEMENT ES-52 Issue Date: 1-1-94 Rev. Date: 2-1-06 Contents Introduction...1. Shipping and Receiving...1. Handling...1. Short Term
More informationTighteners and Idlers
Tighteners and Idlers...rive Tighteners, Idlers, Idler ushings, Set ollars, Keystock and ast Iron ars wide variety of specialized products for automatic production. rowning is adding new power transmission
More informationThese recommendations are a guideline for typical conveyor applications. They do not overrule bearing or greasing manufacturer s recommendations.
OPERATION & MAINTENANCE static shaft pulley (SSP ) SECTION 1 greasing recommendations These recommendations are a guideline for typical conveyor applications. They do not overrule bearing or greasing manufacturer
More informationXT-Series & AT-Series Alternators Designed for Recreational Applications
XT-Series & AT-Series Alternators esigned for Recreational Applications 170A or 220A in a Small ase Package Up to 140A at dle Speeds Patented Smart Ready Technology (XT-Series Only) ual an ooling, igh
More informationNewman-Milliken. Lubricated Parallel Plug Valves. Cast Iron
Newman-Milliken ubricated Parallel Plug Valves Cast Iron The principle of the Newman-Milliken valve is as simple as its design... The plug, which is the only moving part in the valve, when open presents
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationAdvantage Fan 36" and 48"
R R Advantage Fan 36" and 48" AT36Z AT365Z AT481Z AT4815Z Page 1 of 12 Section USER'S MANUAL and INSTALLATION GUIDE TABLE OF CONTENTS Parts list... 3 Installation... 4 Electrical Wiring... 6 Operation...
More informationDATA SHEET CP MOTORIZED PUMP UNITS 3CP1120, 3CP1130, 3CP1140 5CP2140WCS, 5CP2150W
DATA SHEET CP MOTORIZED PUMP UNITS Motors: Motors: 8023ES, 8024ES, 8025ES 8026ES, 8027ES, 8028ES, 8029ES, 8040ES, 8042ES Used on Pump Models: Used on Pump Models: 3CP1120, 3CP1130, 3CP1140 5CP2140WCS,
More informationAmphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
More informationInstallation, Operation and Maintenance Manual
PN 47 Models XUEB - Series 00 and 200 Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationNEW. ABEC 3 Double-Shielded Corrosion-Resistant Lightweight. Overall Length Overall. Length
NW Pillow lock-mounte all earings Miniature ouble-shiele orrosion-resistant ightweight Ø W Ø eatures: ubricate for the life of the bearing Meical, scientific & pharmaceutical applications Operating Temperature:
More informationElectric Park Brake. 1.1 Work flow. 1.2 Checks. 1.3 Diagnosis
Electric Park Brake General guide to renewing components of the electric parking brake from TRW. For safety reasons and to achieve an optimum effect, all maintenance and repair activities must only be
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationSPICER SERVICE MANUAL MANUAL HUB LOK EXTERNAL TYPE INTERNAL TYPE SPICER AXLE DIVISION DANA CORPORATION FORT WAYNE, INDIANA
SPICER SERVICE MANUAL EXTERNAL TYPE INTERNAL TYPE MANUAL HUB LOK SPICER AXLE DIVISION DANA CORPORATION FORT WAYNE, INDIANA INDEX PAGE IMPORTANT SAFETY NOTICE................................... GENERAL
More informationtRIPr Chief Grain Cart. Operator s Manual. Operator s Manual
125-000-01 125-000-01 1tRIPr 1tRIPr Operator s Manual 1210 Chief Grain Cart Operator s Manual Operator s Manual TO THE DEALER Predelivery/Delivery Checklist 1210 Grain Cart PREDELIVERY/DELIVERY CHECKLIST
More informationReproduction. Not for. Installation Instructions. Gearbox Replacement Kit. Part No WARNING REMOVING THE GEARBOX. Fits IS2600Z Models A B
Installation Instructions Kit ontents Part No. Qty. escription Part No. Qty. escription 5025394 5 Nut, 3/8-16 ex Nylock lange 5104533 1 earbox, Right ngle 5025396 4 Nut, 1/2-13 ex Nylock lange Part No.
More informationBike Bollard R-7904 (RSA)
ike ollard R-0 (RS) General escription: The R-0 ike ollard offers versatile design and functionality. ike-locking arms are bolted internally to applications. R-0 ike ollards are made from carbon steel
More information