FIBERLIGN Suspension for OPGW

Size: px

Start display at page:

Download "FIBERLIGN Suspension for OPGW"

Bertha Fox
6 years ago
Views:

IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5.

Insert: n elastomer specifically formulated for resistance to ozone attack, weathering, extreme high and low temperature variations, and compression set.

1 IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5. Insert (for OPW only) iberlign Suspension for Optical round Wire (OPW) olt, Washer, Lock Nut: alvanized Steel. Strap: High-strength luminum lloy. Insert: n elastomer specifically formulated for resistance to ozone attack, weathering, extreme high and low temperature variations, and compression set. n luminum lloy reinforcement is molded into the elastomer. Housing: High-strength aluminum alloy casting Structural reinforcing rods and outer rods: Highstrength luminum lloy. Current Transfer Tab: (Supplied for OPW pplications only) High luminum lloy. PPLICTION The IERLIN Suspension provides superior cable and fiber protection at the support point. The combination of Structural Reinforcing Rods, Outer Rods, boltless housing and resilient inserts reduces compression, clamping, and bending stresses on cable. Negative weather related cable motion, such as aeolian vibration, galloping, and wind sway are also minimized. The IERLIN Suspension is specially designed for supporting all installations of Optical round Wire (OPW). ue to different performance requirements and cable characteristics OPW and SS cables require different design IERLIN Suspension Units. or trunnion or bracket mounting, a IERLIN Trunnion Support for OPW is available. This unit has a housing designed to fit a trunnion cap or bracket with dimensions consistent with those specified in NSI C , Class 57. Consult PLP for specific information. Trunnion mount IERLIN Support for OPW 5-12

IERLIN Suspension for OPW ouble IERLIN Suspension for Optical round Wire (OPW) The Current Transfer Tab provides direct electrical bonding between OPW and a ground lead.

2 IERLIN Suspension for OPW ouble IERLIN Suspension for Optical round Wire (OPW) The Current Transfer Tab provides direct electrical bonding between OPW and a ground lead. The current transfer tab eliminates current transfer through components of the suspension unit. The standard current transfer tab accommodates left-hand lay OPW. Right-hand lay and larger units for special applications are also available. Consult PLP for specifics. IERLIN Hardware for OPW: Section 5 IERLIN Suspension for OPW The current transfer tab is not required or supplied for SS applications. rounding Wire ssembly Options: 4' ground wire with compression terminal can be provided. This assembly can be connected from the IERLIN Suspension to the ground lead in your system. Two types of ground wire materials are offered (copper or aluminum). To include the preferred ground wire assembly in the same carton with the current transfer tab, add the appropriate suffix code to the suspension catalog number (see table on next page). Ultimate & Housing & itting imensions: Refer to dimensional table in this section. Lay irection: Left-hand lay is standard although IERLIN Suspension or Support units for OPW may be used on right-hand lay OPW at reduced slip loads, or custom ordered right-hand lay units are available. Slip Load: When initially installed, the IERLIN Suspension has a slip load of approximately 10-20% of a standard OPW rated strength, but significantly higher loads can be expected after the unit has been in service for a period of time. Line ngles: The maximum recommended line angle for a single IER- LIN Suspension is 30. or OPW line angles between 30 and 60, the IERLIN Suspension: ouble is recommended, although double dead-ending is another option. ouble units for SS cable are available on custom order although double dead-ends are also an option. ittings: n appropriate fitting such as a Y-clevis or clevis eye may be required to attach the Suspension unit to the structure or other hardware. These fittings must match the dimensions of the suspension housing. (See dimensional tables on next page) itting Suffix s: To include the Y-clevis and clevis-eye fittings in the same carton with the suspensions, add the appropriate suffix code to the suspension catalog number (see table on next page). Component Reuse: Once installed, do not reuse the rod components. The hardware components may be reused as desired as long as they are in good condition. o not modify any components. 5-13

3 IERLIN Suspension for OPW and ouble IERLIN Suspensions for OPW Ordering Instructions: Select the appropriate IERLIN Suspension for OPW from the following table. Consult PLP for trunnion or bracket type mounting OPW applications and for the availability of all sizes and designs. ccessories and ittings: round wire assemblies and fittings may be included in the same container with the suspension by adding the appropriate SUIX COE from the adjacent table. Note: the suffix sequence is grounding wire first and fittings second. Example YC includes a single suspension with copper ground wire assembly () and Y-clevis eye (YC). Suffix escription 4' (1.2 m) long #4 (7W) Copper with terminal on one end. # ' (1.2 m) long 4/0 (19W) luminum conductor with terminal on one end. # ' (1.5 m) long 95 mm 2 2 (7w) luminum round wire with terminals at both ends CUTION: etermine appropriate material and size wire necessary to provide adequate grounding for your system before ordering the ground wire assemblies. or proper performance and personal safety be sure to select the proper ground wire before application. S2 nchor Shackle ( no ), # YC One (1) Y-clevis to fit selected suspension. suspension applications. CE One (1) clevis-eye to fit selected suspension. suspension applications. CEYP Two (2) clevis-eyes with yoke plate to fit selected suspension. ouble suspension applications. iameter Range Structural Reinforcement Rods Outer Rods ouble Min. Min. ouble Rod ia. Rods per set Color ouble lue lue reen reen Yellow Yellow lack lack White White Purple Orange Purple Purple Orange Orange Red Purple lue lue reen reen reen reen lack lack lack White rown rown Red Red Red lue Yellow reen Yellow Yellow White lack White White White White rown rown reen reen Yellow Yellow lue lue lack lack White White Purple Purple rown rown Red Red Orange Orange Left-hand lay standard Rod ia. Rods per set Color 5-14

IERLIN Hardware for OPW: Section 5 IERLIN Suspension Housing imensions & ittings IERLIN Suspension imensional Tables OPW or SS Cable iameter Range Inches imensions Inches Ultimate Min. C E H I olt ia.

565 2 4-17/32 2-11/16 7/8 3-5/16 1 2 5 2-11/32 4 9/16.090 (11.7) (14.3) (50.8) (115.1) (68.3) (22.2) (84.1) (25.4) (50.8) (127) (59.5) (101.6) (14.3) (2.3).566.

786 2-1/4 5-1/2 3-1/2 1-3/16 4-5/32 1 2-1/8 5-29/32 2-45/64 4-25/32 9/16.090 (19.9) (57.2) (139.7) (88.9) (30.2) (105.6) (25.4) (54) (150) (68.7) (121.4) (14.3) (2.3).787.

016 2-1/4 6-1/2 4-1/8 1-3/8 5-1/16 1-1/8 2-1/4 6-3/4 2-21/32 5-1/2 (24.9) (25.8) (57.2) (165.1) (104.8) (34.9) (128.6) (28.6) (57.2) (168.3) (19.1) (67.5) (139.7) 1.017 1.

4 IERLIN Hardware for OPW: Section 5 IERLIN Suspension Housing imensions & ittings IERLIN Suspension imensional Tables OPW or SS Cable iameter Range Inches imensions Inches Ultimate Min. C E H I olt ia. J K L M (Lbs.) /4 3-3/4 2-1/4 3/4 2-3/ /8 4-7/16 2-5/32 3-9/16 9/ (9) (11.6) (44.5) (95.3) (57.2) (19.1) (55.6) (25.4) (47.6) (112.7) (54.8) (90.5) (14.3) (2.3) 15, / /16 7/8 3-5/ /32 4 9/ (11.7) (14.3) (50.8) (115.1) (68.3) (22.2) (84.1) (25.4) (50.8) (127) (59.5) (101.6) (14.3) (2.3) /16 7/8 3-11/ /8 2-17/32 4-3/8 9/ (14.4) (15.8) (50.8) (127) (74.6) (22.2) (93.7) (25.4) (50.8) (136.5) (64.3) (111.1) (14.3) (2.3) /4 5-1/2 3-1/2 1-3/16 4-5/ /8 5-29/ / /32 9/ (19.9) (57.2) (139.7) (88.9) (30.2) (105.6) (25.4) (54) (150) (68.7) (121.4) (14.3) (2.3) / / /4 2-3/8 6-11/16 3/4 3-5/32 5-9/16 9/ (20) (24.8) (57.2) (152.4) (92.1) (31.8) (122.2) (31.8) (60.3) (169.9) (19.1) (80.2) (141.3) (14.3) (2.3) /4 6-1/2 4-1/8 1-3/8 5-1/16 1-1/8 2-1/4 6-3/4 2-21/32 5-1/2 (24.9) (25.8) (57.2) (165.1) (104.8) (34.9) (128.6) (28.6) (57.2) (168.3) (19.1) (67.5) (139.7) /4 6-1/2 4-1/8 1-3/8 5-1/16 1-1/8 2-1/4 6-3/4 2-21/32 5-1/2 (25.9) (26.8) (57.2) (165.1) (104.8) (34.9) (128.6) (28.6) (57.2) (168.3) (19.1) (67.5) (139.7) / /16 2-1/4 5-19/32 1-1/8 2-3/8 7-1/4 3/4 3-3/16 6 (26.9) (27.4) (63.5) (177.8) (119.1) (57.2) (142.1) (28.6) (60.3) (184.2) (19.1) (81) (152.4) / /16 2-1/4 5-19/32 1-1/8 2-3/8 7-1/4 3/4 3-3/16 6 (27.5) (28.2) (63.5) (177.8) (119.1) (57.2) (142.1) (28.6) (60.3) (184.2) (19.1) (81) (152.4) / /16 2-1/4 5-19/32 1-1/8 2-3/8 7-1/4 3/4 3-3/16 6 (28.3) (29.2) (63.5) (177.8) (119.1) (57.2) (142.1) (28.6) (60.3) (184.2) (19.1) (81) (152.4) / /16 2-1/4 5-19/32 1-1/8 2-3/8 7-1/4 3/4 3-3/16 6 (29.3) (30.2) (63.5) (177.8) (119.1) (57.2) (142.1) (28.6) (60.3) (184.2) (19.1) (81) (152.4) K I olt ia. J C E H Current Transfer Tab M L IERLIN Suspension Housing imensions & ittings ittings The dimensions of a fitting must correspond to some of the dimensions of the housing of the IERLIN Suspension unit in order to provide proper fit. To select the proper size fitting, identify the outside diameter of the OPW or SS cable and select the appropriate fitting from these tables. O NOT use the tables in the RMOR-RIP Suspension section of this catalog. Clevis Eye OPW or SS Cable iameter Range Min.- Min.- CE CE CE CE in in 1/2 (12.7) 3/4 (19.1) 1-1/16 (27) 2-1/8 (54) eneral imensions C in in E in 11/16 1-1/2 1-1/2 (17.5) (38.1) (38.1) 11/16 1-1/2 1-1/2 (17.5) (38.1) (38.1) 1-1/2 1-1/2 (38.1) (38.1) 1-1/2 1-1/2 (38.1) (38.1) in in Ultimate (Lbs.) 15,000 E Y-Clevis Eye 45 3/ /16 OPW or SS Cable iameter Range eneral imensions Ultimate Min.- Min.- in C in (lbs.) YC /16 (17.5) 15,000 YC /4 (19.1) 11/16 (17.5) YC /16 (27) YC /8 (54) 5-15

IERLIN Suspension Housing imensions & ittings IERLIN Suspension: ouble imensional Tables OPW or SS Cable iameter Range imensions Ultimate Min.- Min.- J in. K in. L (Lbs.).354-.458 9.0-11.6 2-5/32 (54.

7) 4-25/32 (121.4) 26 (66.0) 50,000.787-.855 20.1-21.7 3-5/32 (80.2) 5-9/16 (141.3) 29 (73.7) 50,000.856-1.057 21.8-26.8 2-31/32 (75.4) 5-1/2 (139.7) 32 (81.3) 50,000 1.058-1.208 26.9-30.7 3-3/16 (81.

5 IERLIN Suspension Housing imensions & ittings IERLIN Suspension: ouble imensional Tables OPW or SS Cable iameter Range imensions Ultimate Min.- Min.- J in. K in. L (Lbs.) /32 (54.8) 3-9/16 (90.4) 18 (45.7) 30, /32 (59.5) 4 (101.6) 18 (45.7) 40, /32 (64.3) 4-3/8 (111.1) 22 (55.9) 40, /64 (68.7) 4-25/32 (121.4) 26 (66.0) 50, /32 (80.2) 5-9/16 (141.3) 29 (73.7) 50, /32 (75.4) 5-1/2 (139.7) 32 (81.3) 50, /16 (81.0) 6 (152.4) 37 (94.0) 50,000 ittings The L dimension of a Yoke Plate must match the L dimension between the two housings of the ouble Suspension unit. Identify the outside diameter of the OPW or SS cable and select the proper L dimension and Yoke Plate from these tables. O NOT use the tables in the RMOR- RIP Suspension section of this catalog. itting, such as a Clevis Eye, is required between each Suspension housing and the Yoke Plate. Refer to the tables on for proper fitting selection. nother fitting may be required between the Yoke Plate and structure. Yoke Plate OPW or SS Cable iameter Range Min.- Min.- L H in. imensions R in. Radius in. Plate Thickness in. YP (45.7) 6-1/4 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 3-1/2 (8.9) YP (55.9) 7-1/4 (18.4) 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 4-3/16 (10.6) YP (66.0) 8-1/2 (21.6) 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 4-15/16 (12.5) 3/4 (19.1) YP (73.7) 9-1/2 (24.1) 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 5-1/2 (14.0) 3/4 (19.1) YP (81.3) 10-1/2 (26.7) 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 6-1/8 (15.6) 3/4 (19.1) YP (94.0) 11-3/4 (29.8) 1 (25.4) 15/16 (23.8) 1-1/4 (31.8) 7-1/16 (17.9) 3/4 (19.1) 5-16

Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW

Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW FIBERLIGN Hardware for OPGW: Section Section Fiber Optics: FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN ead-end for OPGW...-3 FIBERLIGN Formed Wire