ARMOR-GRIP Suspension: Double
|
|
|
- Jasper Singleton
- 5 years ago
- Views:
Transcription
1 : Double For Line Angles Between 30 and 60 ACSR, All-Aluminum, Aluminum Alloy, AWAC Compacted All-Aluminum Compacted ACSR, ACSS, ACSS/TW Range AGS s AGS AGS s & Min. Max. Nominal Conductor Size s Per Set Wt./Lbs. Per AGS #4, 3/4 AWAC Brown AGS #2, 6/ Red AGS #4, 2/5 AWAC Orange AGS #3, 3/4 AWAC Black AGS #, 5/2 AWAC Green AGS #3, 2/5 AWAC Purple AGS /0, 6/ Yellow AGS /0, 5/2 AWAC Brown AGS #, 3/4 AWAC Green AGS /0, 6/ Blue AGS /0, 5/2 AWAC White AGS , 2/ Green AGS #, 2/5 AWAC Red AGS /0, 6/ Blue AGS /0, 7W All-Alum Green AGS , 2/7 AWAC Yellow AGS /0, 3/4 AWAC Black AGS /0, 6/ White AGS , 7-9W All-Alum Brown AGS , 8/ AWAC Orange AGS , 8/ Purple AGS , 26/ Red AGS , 9W All-Alum Blue AGS , 26/ Green AGS , 26/7 AWAC Yellow AGS , 26/ Black AGS , 30/ White AGS , 26/7 AWAC Brown AGS , 26/ Orange AGS , 30/ Purple AGS , 26/7 AWAC Red AGS , 26/ Blue AGS , 30/ Green AGS , 30/ Green Note: Add HT to catalog number for High Temperature Version (Ex.: AGS-582HT). (Continued on next page) Right-hand lay standard () Nominal Conductor Size indicates one of various conductors within each range. (2) Reference general dimensional information for physical dimensions other than length. (3) ARMOR-GRIP : Double does not include AGS FITTINGS, i.e., AGS Socket Eye, AGS Clevis Eye or AGS Y-Clevis Eye. See tables preceding AGS Information for catalog numbers, prices and dimensions of AGS FITTINGS. Two fittings are required for each ARMOR-GRIP : Double. (4) AWAC is a registered trademark of the Copperweld Co. -7
2 : Double For Line Angles Between 30 and 60 ACSR, All-Aluminum, Aluminum Alloy, AWAC Compacted All-Aluminum Compacted ACSR, ACSS, ACSS/TW Range Min. Max. Nominal Conductor Size AGS s s Per Set AGS AGS s & Wt./Lbs. Per AGS , / Yellow AGS , 26/ Black AGS , 30/ White AGS , 26/ Brown AGS , 30/ Orange AGS , 30/ Purple AGS , / Red AGS , 26/ Blue AGS , 30/ Green AGS , 26/ Yellow AGS , 45/ Black AGS , 30/ White AGS , 54/ Brown AGS , 54/ Orange AGS , 45/ Purple AGS , 54/ Red AGS , 48/ Blue AGS , 54/ Green AGS , 54/ Yellow AGS , 54/ Black AGS , 48/ White AGS , 54/ Brown AGS , 48/ Orange AGS , 54/ Purple AGS , 54/ Red AGS , 72/ Blue AGS , 84/ Green AGS , 9W Yellow AGS , 72/ Black AGS , 84/ White AGS , 84/ Brown AGS , 84/ Orange AGS , 84/ Purple Note: Add HT to catalog number for High Temperature Version (Ex.: AGS-5854HT). Right-hand lay standard () Nominal Conductor Size indicates one of various conductors within each range. (2) Reference general dimensional information for physical dimensions other than length. (3) ARMOR-GRIP : Double does not include AGS FITTINGS, i.e., AGS Socket Eye, AGS Clevis Eye or AGS Y-Clevis Eye. See tables preceding AGS Information for catalog numbers, prices and dimensions of AGS FITTINGS. Two fittings are required for each ARMOR-GRIP : Double. (4) AWAC is a registered trademark of the Copperweld Co. -8
3 : Double (EHV) With PARROT-BILL End s for Extra High Voltage (EHV), 345 KV and above ACSR, All-Aluminum, Aluminum Alloy, AWAC Compacted All-Aluminum Compacted ACSR, ACSS, ACSS/TW Range Min. Max. Nominal Conductor Size AGS s s Per Set AGS AGS s & Wt./Lbs. Per AGS , / Yellow AGS , 26/ Black AGS , 30/ White AGS , 26/ Brown AGS , 30/ Orange AGS , 30/ Purple AGS , / Red AGS , 26/ Blue AGS , 30/ Green AGS , 26/ Yellow AGS , 45/ Black AGS , 30/ White AGS , 54/ Brown AGS , 54/ Orange AGS , 45/ Purple AGS , 54/ Red AGS , 48/ Blue AGS , 54/ Green AGS , 54/ Yellow AGS , 54/ Black AGS , 48/ White AGS , 54/ Brown AGS , 48/ Orange AGS , 54/ Purple AGS , 54/ Red AGS , 72/ Blue AGS , 84/ Green AGS , 9W Yellow AGS , 72/ Black AGS , 84/ White AGS , 84/ Brown AGS , 84/ Orange AGS , 84/ Purple Note: Add HT to catalog number for High Temperature Version (Ex.: AGS-5887HT). Right-hand lay standard () Nominal Conductor Size indicates one of various conductors within each range. (2) Reference general dimensional information for physical dimensions other than length. (3) Standard ARMOR-GRIP does not include AGS FITTINGS, i.e., AGS Socket Eye, AGS Clevis Eye or AGS Y-Clevis Eye. See tables preceding this AGS information for catalog numbers and dimensions of AGS FITTINGS. (4) AWAC is a registered trademark of the Copperweld Co. -9
4 DIMENSIONAL TABLES Conductor Range (In.) Dimensions in Inches Vertcal Ultimate Strength (Pounds) Min. Max. J K L /32 3-7/ , /32 3-7/ , /32 3-3/6 2 20, /6 3-/4 2 20, /6 3-/4 8 20, /32 3-9/6 8 30, / , /32 4-3/ , / / , /32 5-9/ , /32 5-/ , / , /2 6-7/ ,000-20
5 AGS Yoke Plate Dimensions in Inches L H D R A F Plate Thickness Ultimate Strength (Pounds) YP /6 3/6 NONE /2 30,000 YP /4 5/6 -/4 3-/2 5/8 40,000 YP /4 5/6 -/4 4-3/6 5/8 40,000 YP /2 5/6 -/4 4-5/6 3/4 50,000 YP /2 5/6 -/4 5-/2 3/4 50,000 YP /2 5/6 -/4 6-/8 3/4 50,000 YP /4 5/6 -/4 7-/6 3/4 50,000 AGS Socket Clevis General Dimensions A In. B In. C In. D In. E In. F In. G In. Ultimate Strength (Pounds) For Use with Specific Strength Insulators (Pounds) SC /8-9/6 /6-3/4-5/8 5/8 3/6 30,000 5,000 thru 30,000 SC / /6 2-/6 7/8 -/8 50,000 36,000 thru 50,000-2
6 Galvanized Steel Strand AGS-7097 AGS-7797 AGS-7098 AGS-7798 AGS-7099 AGS-7799 AGS-700 AGS-7800 AGS-70 AGS-780 AGS-702 AGS-7802 AGS-703 AGS-7803 AGS-704 AGS-7804 AGS-705 AGS-7805 AGS-706 AGS-7806 AGS-707 AGS-7807 AGS-708 AGS-7808 AGS-709 AGS-7809 AGS-70 AGS-780 AGS-7 AGS-78 AGS-72 AGS-782 Strand Size Range AGS s AGS Min. Max. 9/32", 7W /6", 7W EHS 5/6", 7W Utility /8", 7W EHS /6", 7W EHS /2", 7W-9W (S) 57(D) s Per Set (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) AGS s & Wt./Lbs. Per Blue Red Brown Black Green Purple Brown Orange Blue Red Brown Black Green Purple Brown Blue Left Hand Lay Standard () Caution Nominal strand diameter may be different than actual strand diameter. Use actual strand diameter to select Cat. Nos. Strand Size indicates one of various strands within each range. (2) S Single support to be used on line angles between 0 and 30. D Double support to be used on line angles between 30 and 60. (3) For double support, two cartons of hardware are required for each carton of rods. -22
7 Aluminum Clad Steel Strand Size Range Min. Max. AGS s s Per Set Sets Per AGS AGS s & Wt./Lbs. Per AGS-8097 AGS #8, 8M 9/32", 7W (3) Blue AGS-8098 AGS (3) Red AGS-8099 AGS (3) Black AGS-800 AGS #7, 7 #0 0M (3) Brown AGS-80 AGS-880 5/6", 3W, 7W (3) Purple AGS-802 AGS (3) 60 0 Green AGS-803 AGS #6, 7 #9 2.5M (3) 60 0 Black AGS-804 AGS M 3/8" (3) 60 Brown AGS-805 AGS #8, 6M (3) 62 Red AGS-806 AGS # (3) Blue AGS-807 AGS M (3) Orange AGS-808 AGS # (3) Brown AGS-809 AGS M (3) Purple AGS-80 AGS (3) Green AGS-8 AGS (3) Black AGS-82 AGS # (S) 57(D).44 (3) Blue Left-hand lay standard () Strand size indicates one of various strands within each range. (2) S Single support to be used on line angles between 0 and 30. D Double support to be used on line angles between 30 and 60. (3) For double support, two cartons of hardware are required for each carton of rods. -23
8 DESIGN MODIFICATIONS For line angles between 30 and 60, use the double support arrangement with the insulator strings connected directly to the ARMOR-GRIP. Shown is a close-up picture of the double support arrangement. Shown below is the ARMOR-GRIP : Double as used for line angles between 30 and 60. Shown below is the ARMOR-GRIP : Single as used for line angles between 0 and 30. ALTERNATE METHOD Double Support Single String with Yoke Plate A single string of insulators and yoke plate may be used as an alternate method for suspending the ARMOR- GRIP : Double. The yoke plate must have the proper L dimension. Please refer to previous Fitting and tables to obtain dimensional information and catalog numbers of available yoke plates. -25
Armor Rods. Armor Rods NOMENCLATURE GENERAL RECOMMENDATIONS
Transmission: Section 1 NOMENCLATURE Single Support and Double Support : Identified by S and D appearing in the length column on the catalog page. Should the maximum distance between tied supports exceed
Slack Span Dead-end GENERAL RECOMMENDATIONS NOMENCLATURE (440)
NOMENCLATURE Material Helical Leg Section: Aluminum covered steel. An aluminum alloy version is available for corrosive environment. Contact PLP. Crossover Marks: Indicates starting point for application
August THERMOLIGN Products for CTC ACCC Conductor
August 2017 THERMOLIGN Products for CTC ACCC Conductor History of THERMOLIGN Hardware at PLP Preformed Line Products has been involved with the design, testing and production of hardware and accessories
GSA Series Formed Wire Suspension
GSA Series Formed Wire Suspension Formed Wire Suspension Unit AFL is a renowned manufacturer of aluminum conductor accessories, manufacturing numerous products for the electric utility industry since the
TRANSMISSION LINE REPAIR MANUAL. A guidebook for the inspection and repair of damaged or worn conductors
TRANSMISSION LINE REPAIR MANUAL A guidebook for the inspection and repair of damaged or worn conductors August 2017 PREFACE Since 1947 Preformed Line Products has been a recognized leader in the business
THERMOLIGN Products for 3M Aluminum Conductor Composite Reinforced (3M ACCR)
Products for 3M Aluminum Conductor Composite Reinforced (3M ACCR) July 2015 History of Hardware at PLP Preformed Line Products has been involved with the design, testing and production of hardware and
Conductor Protection. results
Conductor Protection results Conductor Protection Index Dampers 607... Vibration Damper 4R Stockbridge...1 Armor Rods AP8... Aluminum Armor Rods...6 APS... alvanized Steel Armor Rods...8 APAS... AluminumClad
Suspension Clamps. performance
Suspension Clamps performance Suspension Clamps Index olted/aluminum CFS... Corona Free Clamp for Use With Armor Rods...-3 CFS (ONG)... Corona Free Clamp for Use Without Armor Rods...-4 CFSHT... Corona
FIBERLIGN Suspension for OPGW
IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5. Insert (for OPW only) iberlign Suspension
Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section Fiber Optics: FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN ead-end for OPGW...-3 FIBERLIGN Formed Wire
Standard Compression Dead End for ACSR and ACSS Conductor CAUTION: ACSR Dead Ends Cannot Be Used on ACSS HT Conductor
INS-ACA089 Installation Instructions Standard Compression Dead End for ACSR and ACSS Conductor CAUTION: ACSR Dead Ends Cannot Be Used on ACSS HT Conductor 1. Mark the conductor a distance of 3 /4 the length
Section 6 FIBERLIGN Hardware for ADSS
FIBERLIGN Hardware for ADSS: Section 6 Section 6 FIBERLIGN Hardware for ADSS Table of Contents Page Fiber Optic Product Layout for ADSS...6-2 FIBERLIGN Lite Tension Dead-end for ADSS...6-3 FIBERLIGN Dielectric
PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors
MARCH 2017 PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
Section 5 FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN Dead-end for OPGW...-3 FIBERLIGN Formed Wire Dead-end...-6
+91-8048571184 UB Exim Private Limited http://www.ubexim.in/ We are amongst the leading exporters, manufacturers, suppliers and traders, of this highly commendable and diverse range of Electrical Spares
VORTX Vibration Damper
Product Identification 1 2 3 5 4 NOMENLTURE 1. lamp & Keeper: The lamp has an extruded hook shaped profile to hang onto the cable or conductor while tightening the keeper. Together, the aluminum keeper
www. ElectricalPartManuals. com SPECIFICATIONS Page 1 of 24 March 24, 2003
Types SM-4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through kv) Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet apply, except as modified under
Specifications. S&C Power Fuses Types SM- 4, SM-5, SMD-20, and SMD-40 Outdoor Distribution (4.16 kv through 34.5 kv)
S&C Power Fuses Types SM- 4, SM-5, SMD-0, and SMD-40 Outdoor Distribution (4.16 kv through kv) For use with SM Refill Units or SMU Fuse Units Specifications Conditions of Sale STANDARD: The seller s standard
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
Transmission Tools. Catalog 2250 May Transmission Tools Phone: Web: hubbellpowersystems.
Transmission Tools Catalog 2250 May 2016 Transmission Tools 2250 May 2016 Page 2251 STRAIN LINK STICK Tested per OSHA & ASTM F711 Used as insulation between rope blocks and a hot line wire grip For deadend
Jumper Terminals and Tee Taps. delivery
Jumper Terminals and Tee Taps delivery November 017 November 017 Jumper Terminals & Tee Taps Index Compression/Aluminum JTS... Straight Pad for AAC, AAAC, ACAR & ACSR Conductor... -1 JTF... 15 Degree Pad
STRAIN LINK STICK ROLLER LINK STICK ADJUSTABLE STRAIN POLES SPIRAL LINK STICK TRANSMISSION TOOLS
172 Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com STRAIN LINK STICK Used as insulation between rope blocks and a hot line wire grip For deadend structures and running corners Attached to conductor
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE The hardware fittings suitable for tension string to be used for 11KV consisting of following
026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
Southwire ACSR/TW ACSR/TW
Southwire ACSR/TW ACSR/TW Conductor, Reinforced. Trapezoidal Shaped Strands. Bare. APPLICATIONS Shaped Wire Compact Concentric-Lay-Stranded Conductor, -Reinforced(ACSR/TW) is designed for use as a bare
00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
SPECIFICATION S VR 1(4) HALOGEN FREE POWER AND CONTROL CABLE FOR MARINE APPLICATIONS LM-HF 0,6/1 kv and TEMAR PHFX-U 0,6/1 kv APPLICATI
1(4) HALOGEN FREE POWER AND CONTROL CABLE FOR MARINE APPLICATIONS LM-HF 0,6/1 kv and TEMAR PHFX-U 0,6/1 kv APPLICATION Power and control cable for fixed installations. Designed to fulfill requirements
230 kv Aluminum Welded Couplers TYPE or Straight Adapter Tube To Cable
TYPE 14700 Straight Adapter Tube To Cable Adapter is designed to make inline connection between pipe and stranded cable. Cable is puddle welded to connector; connector is then welded to tube. Not recommended
SUSPENSION 04 CLAMPS
SUSPENSION CLAMPS 04 4 SUSPENSION CLAMPS 57 Contents General... 58 Suspension clamp trunnion type, forged,... 63 Suspension clamp trunnion type, forged, with bigger angle of deflection, for aluminium based
Compression Hardware Series For ACSR Conductors
Compression Hardware Series For ACSR Conductors PAGE 4 5 6 7 CONTENTS Compression Dead-end - CMPDE Compression Jumper Terminal - CMPTM Compression Dead-end assembly - cmpdej compression splice assembly
Transmission Line String Hardware
Transmission Line String Hardware Table of Contents Page Section 1 Clevis Eye... TLSH-2 Rotated Clevis Eye... TLSH-2 Y Clevis Eye... TLSH-3 all Clevis... TLSH-3 Socket Clevis... TLSH-4 Socket Eye... TLSH-4
PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
Section 4 - Protection
Transmission Catalogue : Section 4 Protection Section 4 - Protection Table of Contents Section/Page PREFORMED Armor Rods For AAC, AAAC and ACSR s... 4-3 For AAC, AAAC and ACSR s (Subset)... 4-3 For SC/GZ
Pulling & Support Grips
DCD Pulling Grips DCD cable grips are hand-woven by experienced tradespeople guaranteeing a consistent level of high quality. DCD grips are reverse woven, creating a loop at the end of the grip instead
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS Made from high impact, UV resistant, polyvinyl chloride (PVC), they are non-corrosive and do not abrade the conductor or require
Wire Management Products Index
Section T Wire Management Products Index Product Page Number Kellems Wire Mesh Grips T-2 3 Pulling Grips T-4 16 DUA-PULL Grips T-6 DUA-PULL Feed Tube T-6 Overhead Multiple Strength T-7 Underground Pulling
BS 6724 Armoured Power Cables, 600/1000V
BS 6724 Armoured Power Cables, 600/1000V Application These cables are used for power and control circuits, they can offer excellent protection through the use of a heavy galvanized steel wire armour. The
POWER. Lengths (ft) Nominal Overall Diameter. Part Number. Gauge /strands
GPT HOOK-UP: round construction wire is made of one, stranded conductor insulated with polyvinyl chloride. Wire used for connecting low voltage power in vehicles, control equipment, RVs and other. Gauge
BROCHURE BARREL PACK SYSTEM
BROCHURE BARREL PACK SYSTEM Tripod Cart MC Tuff MC Lite MC-Quik MC-Stat A OF TRIPOD Description: Three legged, collapsible with black knob handscrews Made out of high quality aluminum alloy Tripod Dimensions:
TRANSMISSION PRODUCTS
TRANSMISSION PRODUCTS INDEX Deadends bolted/aluminum AR1/AR2... QUADRANT STRAIN CLAMP...TA-4 PG/DE... QUADRANT STRAIN CLAMP...TA-3 SD... QUADRANT STRAIN CLAMP...TA-1 SDT2... DOUBLE GROOVE STRAIN CLAMP...TA-2
Bolted Dead End for OPGW
Bolted Dead End for OPGW The AFL Dead End is a full tension termination for Optical Ground Wire cable. Breakaway head bolts are used to apply a precise gripping force to hold the cable without affecting
Company Profile. ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees.
Company Profile ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees. We provide products such as electrical fittings, optical
Roughneck Single- Conductor Connectors. The ultimate performance solution, built to take heavy abuse under the most extreme conditions.
Roughneck Single- Conductor Connectors The ultimate performance solution, built to take heavy abuse under the most extreme conditions. Roughneck Applications, Features & Benefits High-amperage connectors
Jumpering and grounding equipment and assemblies
Supersedes 325-50 July 2014 Jumpering and grounding equipment and assemblies Contents Description Page Jumpering Equipment Load Pickup Clamps... 2 Jumper Clamps.... 3 Jumper Components.... 4 C-Type Grounding
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES J-2 Grounding Equipment Accessories. www.salisburybyhoneywell.com BALL & SOCKET SYSTEM BALL STUDS
TECHNICAL SPECIFICATIONS FOR HARDWARE & ACCESSORIES -ACSR DOG CONDUCTOR FOR TRANSMISSION LINE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATIONS FOR HARDWARE & ACCESSORIES -ACSR DOG CONDUCTOR FOR TRANSMISSION LINE GETCO/E/TS
Mechanical Suspensions Single and Double
Mechanical Suspensions Single and Double Supporting spans of Optical Ground Wire cable through a wide range of line angle changes, the unique design of the lightweight AFL Mechanical Suspension installs
TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES-ACSR PANTHER CONDUCTOR FOR TRANSMISSION LINE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES-ACSR PANTHER CONDUCTOR FOR TRANSMISSION LINE GETCO/ENGG/TECH.
Specifications. S&C Type XS Fuse Cutouts. Outdoor Distribution (4.16 kv through 25 kv)
Outdoor Distribution (4.16 through 25 ) Specifications Conditions of Sale STANDAD: Seller s standard conditions of sale set forth in Price Sheet 153 apply, except as modified under WAANTY QUALIFICATIONS
Specifications. S&C Alduti-Rupter Switches with Power Fuses Outdoor Distribution (14.4 kv through 46 kv)
Outdoor Distribution (4.4 kv through 46 kv) Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 50 apply, except as modified under WARRANTY QUALIFICATIONS
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY connectorproducts.com 1300 John Tipton Blvd. Pennsauken, NJ 08110 Phone: 856.829.9190 Fax: 856.829.9195 Catalog IX.1 American Design American Made Our success
Introduction. Nexans wire and cable. Contact us for all your wire and cable needs
Introduction Nexans is one of the largest wire and cable manufacturers in the world, and in North America. In North America we manufacture in locations across the United States and Canada. We design and
SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE
SPECIFICATION FOR HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV/22KV LINE The hardware fittings suitable for tension string to be used for 11KV / 22 KV consisting of following components.
SPECIFICATIONS. S&C Alduti-Rupter Switches with Power Fusesa SPECIFICATION BULLETIN Indoor Distribution (4.8 kv and 13.
S&C Alduti-Rupter Switches with Power Fusesa SPECIFICATIONS Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply, except as modified under WARRANTY QUALIFICATIONS
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
LINE FITTINGS I N D E X
LINE FITTINGS I N D E X LINE FITTINGS Anchor Shackles Type AS. Page C-2 Ball Eye Links Type BEL...Page C-3 Ball Clevis Type BC. Page C-4 Clevis Tongues Type CT.Page C-5 Twisted Clevis Tongues Type TCT.
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
ALLOY 825 SHEATHED, MINERAL INSULATED, FIRE-RATED WIRING CABLE
PYOTENAX SYSTEM 2000 ALLOY 825 SHEATHED, MINEAL INSULATED, FIE-ATED IING CALE Cable construction Seamless Alloy 825 metal sheath Magnesium oxide (MgO) insulation Solid nickel-clad copper conductors PODUCT
A 120V BR GFI Recpt. Features. Material, Color, and Finish. Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 2095 20A 120V BR GFI Recpt. Pass & Seymour/Legrand Catalog Number 2095 Manufacturer Pass
25 kv class fused loadbreak elbow connector
Loadbreak Connectors Catalog Data CA650070EN Supersedes 500-111 July 2012 COOPER POWER SERIES 25 kv class fused loadbreak elbow connector General Eaton combines a fully-shielded and insulated plug-in termination
SVR10 SVA10. External Pilot air specification. Conventional specification 0 ~ 0.7. Compact, yet keeps large capacity.» Limited space can be utilized.
Compact, yet keeps large capacity.» Limited space can be utilized. Standard.» SVR 10 series takes over the functions (Valve variations) of discontinued SVA 10 series. Pneumatic Symbols 1(P) 1(P) 1(P) 1(P)
NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1
NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1 NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1 kv Al / XLPE / LS / PVC / AWA / PVC (, XLPE Insuled, ed, Aluminium Wire Armor, ed) Construction Da 16 23.0 1,102 25 23.0 1,104 35 23.0
UK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
INSTA-CHAIN INTRODUCTION INTRODUCTION
2017 PARTS CATALOG INTRODUCTION Welcome to the Insta-Chain catalog and thank you for your interest in our product. We would like you to make note of the following items as they may have changed or you
PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS
PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS Sl. 1 260200003A STEEL TUBULAR POLE SWAGED 11 MTR. LONG WITH BASE 7651.62 8034.20 8435.91 PLATE & CAP (IS2713/1980) BTM: 165.1X4.5MM-5.6MTR,
RSK Connectors and Installation Tools
Grounding Connectors RSK Connectors and Installation Tools...2-4 Two-Piece Grounding Connectors for Shielded and Coaxial Cable...5-7 Color-Coded Tool and Die Selection System...8-9 Connector for Multiple
600 A 15 and 25 kv class Cleer grounding elbow
Loadbreak/Deadbreak Connectors CA650013EN Supersedes March 2015 COOPER POWER SERIES 600 A 15 and 25 kv class Cleer grounding elbow General Eaton provides a visible ground on its Cooper Power series 600
INSTA-CHAIN 2009 CATALOG
2009 CATALOG INTRODUCTION INSTA-CHAIN Welcome to the Insta-Chain catalog and thank you for your interest in our product. We would like you to make note of the following items as they may have changed or
AV Series Dynamic Mount
60 AV Series Dynamic Mount Tilt and swivel Compact Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation Factory
Grounding equipment COOPER POWER SERIES. Temporary Connections CA325004EN. Contents
Temporary Connections CA325004EN Supersedes November 2016 Grounding equipment COOPER POWER SERIES Contents Description Page Grounding elbow products... 2 Grounding elbow and kit product ratings... 5 200
SAFETY SOCKET BOX. Note 8 3" MIN. 3" Max. (200 A)
.&. SAFETY SOCKET BOX USE: 1 12/24V 1A & 2A 4 Terminal EUSERC Dwg. No's 34 & 35 (With Factory Installed Test-Bypass Facilities) Refer to SR-452 for the complete Front View Lower-Panel Removed Note 3 3"
Wire Mesh. Flexible Cord. Liquid Tight Mesh Grips for Flexible Metal Conduit STR GT Series
58 We have taken our excellence and combined quality steel mesh to create the best grips in the industry. American Fittings cable grip and cord grip bodies are safe and strong in any industrial environment.
How the choice of transmission conductor can reduce greenhouse gas emissions.
How the choice of transmission conductor can reduce greenhouse gas emissions. What is the scope of the impact? Complete conversion of the US grid to efficient conductor would eliminate 44 million metric
When buying Crosby you re buying more than product, you re buying Quality.
From a 2 ton capacity snatch to a 6000 metric ton capacity crane, McKissick can make a McKissick s major involvement in the block McKissick When buying Crosby you re buying more than product, you re buying
230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or
230 kv luminum 230 kv luminum TYPE 16300, 16500, 16700 Cable Support The 16300, 16500 and 16700 series supports are designed for mounting stranded aluminum or CSR conductors. New cable support reduces
SURGE DURABILITY AND IMPROVED TRANSFORMER PROTECTION
Fusing Equipment Tandem ELF Current-Limiting Dropout Fuse Electrical pparatus 240-67 GENERL The Cooper Power Systems Tandem ELF current-limiting fuse is designed for transformer protection. The Tandem
Communication & Low Voltage. Communication & Low Voltage
145 Communication & low Voltage Cable Supports cable ties up to 9 /32" wide from flanges 1 /16" to 3 /4" thick. 8" cable tie included. Simply installed with a hammer. BE Series BF Series 78101119970 BE-2-4-CT2
Cable Grips, Swivels and Accessories
Cable Grips, Swivels and Accessories For quick and efficient cable installation and support Swann & Associates 562.492.1394 562.492.1396 fax sales@swann-associates.com 1707-B East 28th Street Signal Hill,
GE TRANQUELL Surge Arresters
GE Grid Solutions GE TRANQUELL Surge Arresters Product Selection Guide IEC Line Discharge Classes with 2, 3, and 4 Polymer Housings GE Surge Protection The performance and reliability of today s electric
S&C Circuit-Switcher Mark VI Outdoor Transmission (69 kv through 138 kv)
Outdoor Transmission (69 kv through 138 kv) Construction Guide This publication sets forth the data required for the user to design a support structure or pedestals for a Mark VI Circuit-Switcher; the
L1L Series. LED Luminaire for Harsh and Hazardous Environments
L1L Series LED Luminaire for Harsh and Hazardous Environments L TI IGH NG HA Z LO C T-slot for easy mounting using a 5/16 or M8 bolt ¾ NPT on 3 sides with Available M20 hub option Removable Ceiling Flush
POLYMER INSULATOR. Index
POLYMER INSULATOR Index INTRODUCTION...2 IEC COMPOSITE INSULATORS...7 ANSI COMPOSITE INSULATORS...14 Introduction General This new generation of Polymer Insulator characterized with: Small Light High mechanical
TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR 400 KV TRANSMISSION LINE WITH QUAD ACSR MOOSE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR 400 KV TRANSMISSION LINE
N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv
N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 38.5 2,603 35 41.5 3,074 50 44.5 3,641 70 48.5 4,536 95 52.0 5,542 120 56.0
DIAMETER (PER ANSI/ICEA S )
HQ2000.175" TRXLP 15 KV CONCENTRIC COMPRESSED STRANDING AND SOLID S PHYSICAL DATA Min. Max. Insulation Insulation With 2 SOLID 10 14.258.610.695.978 61.1 130 356 477 2 7 10 14.283.635.720 1.003 62.3 130
Illustrated Parts List
More time on the road Illustrated s List T-11605A November 2012 Contents How To Use The Illustrated s List... 3 CASE (FRONT)... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT & DRIVE GEAR... 9 ISOLATORS... 11 KITS
Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance
Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance 1 Contents Installation Guidelines and Maintenance for 3M ACCR Aluminum Conductor Composite Reinforced 1. Introduction.4
BS EN Natural. (Orange for Non-sheathed) (Red & Black) or (Brown & Blue) (Red, Yellow, Blue) or (Brown, Black, Grey)
LOW SMOKE HALOGEN FREE (LSHF) FIRE RESISTANT CABLES Voltage Rating (Uo/U) : /0V, /7V or 00/00V Standards Complied Main Specification Fire Tests Flame Retardant Test Test on Acid Gas Evolved Smoke Density
OPTOFIT CATALOGUE. FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES.
OPTOFIT CATALOGUE FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES. EXCLUSIVE AUSTRALIAN DISTRIBUTORS B8/8 Introduction Metalfree (ADSS
Manufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
Kcmil. Mass kg/each. Tel:
Catalog Number Conductor Size Kcmil Conductor Strand Alu Dead End Alu Jumper Steel Dead End Approximative Mass kg/each Cicame Alu Die Cicame Steel Die CSA Alu Die CSA Steel Die TD6N TD7N TD8N TD9N TDN
COYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
N4 Series Magnetic Encoder Module High Resolution Module
Features and Benefits Two channel quadrature output Industry standard 7272 line driver output RS-422 compatible output 5V output standard; 24V output available Options up to 5000 pulses per channel per
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
Overhead Connectors. Automatic Splices and Dead-Ends
utomatic Splices and Dead-Ends lackburn TS utoset utomatic Splices Make quick, dependable overhead tension splices and speed up installation time lackburn automatic splices make fast and dependable overhead
Wire Mesh Safety Grips
Pulling Grips PS Series S PS Series grips feature a double weave of galvanized steel strands for greater strength and added mesh contact with the cable. Leviton Double Weave Pulling Grips are designed
Our overhead products go above and beyond all others. QUICK REFERENCE. Overhead Connectors. & Covers. Overview
Overview QUICK REFERENCE Overhead Connectors & Covers page(s) Our overhead products go above and beyond all others. We have plenty of overhead connectors. From transformer eyebolts and stirrup connectors
TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR TRANSMISSION LINE
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATIONS OF HARDWARE & ACCESSORIES ACSR MOOSE CONDUCTOR FOR TRANSMISSION LINE GETCO/E/TS
Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.