Kcmil. Mass kg/each. Tel:
|
|
|
- Bruno Caldwell
- 6 years ago
- Views:
Transcription
1 Catalog Number Conductor Size Kcmil Conductor Strand Alu Dead End Alu Jumper Steel Dead End Approximative Mass kg/each Cicame Alu Die Cicame Steel Die CSA Alu Die CSA Steel Die TD6N TD7N TD8N TD9N TDN TDA-0N TDA-N TDA-6N TDA-7N TDA-60N TDA-8N TDA-9N TDA-6N TDA-6N TDN TDA-6N TDNSB TDA-7N TDA-8N TDA-69N TDA-N TDA-7N TDA-68N TDA-N TDA-N TDA-N TDA-65N TDA-6N TDN TDA-N TD5N ,5 97, , /7 6/7 8/ 6/7 /7 8/ 8/ 6/7 /7 8/ 6/7 /7 8/ /7 6/7 /7 /7 /7 6/7 /7 /7 5/7 /7 5/7 6/7 5/7 /7 /7 5/7 6/7 /7 AD-7.0N AD-7.0N AD-7.0N AD-7.06N AD-7.0N AD-7.0N AD-7.N AD-7.07N AD-7.07N AD-85.05N AD-85.0N AD-85.0AN AD-85.00N AD-85.N AD-85.0N AD-85.0N AD-85.0AN AD-85.08N AD-85.06N AD-85.08N AD-0.0AN AD-0.0N AD-0.0N AD-0.0N AD-0.0N AD-0.0N AD-0.0N AD-0.0AN AD-0.0N AD-0.0N AD-0.0AN AT-7.0N AT-7.0N AT-7.0N AT-7-06N AT-7-0N AT-7.0N AT-7-N AT-7.07N AT-7.07N AT-85.05N AT-85.0N AT-85.0N AT-85.00N AT-85.N AT-85.0N AT-85.0N AT-85.0N AT-85.08N AT-85.06N AT-85.08N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N SD-85.0 SD-85.0 SD-85-0 SD-85A.05 SD-85A.08 SD-85-0 SD-85-0 SD-85A.06 SD-85A. SD-85A.0 SD-85A.07 SD-9.0 SD-85A.8 SD-85A.05 SD-9.0 SD-9.06 SD-85A.05 SD-9.08 SD-9.0 SD-9.0 SD-0.0 SD-9.0 SD-9.07 SD-0.0 SD-0.06 SD-0.0 SD-9.09 SD-9.09 SD-0.0 SD-0.07 SD ,5,,7,,,67,65,,6, S-0 S-0 S-0 S-0 S-0 S Tel:
2 All the items in the illustration including / - UNC galvanized steel bolts, nuts and washer for the NEMA terminal pads are covered by one catalogue number. Bolt or pin for steel dead end must be secured by customer. Dies for Model -TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 00-S/D Compressor have prefix D. Example: CD, JD, D. Max. size die for Model -TON Compressor : CD, CD Tel:
3 Catalog Number Conductor Size Kcmil Strand Catalog Numbers Alu joint Catalog Numbers Steel Joint Approximative Mass kg/each Cicame Alu Die Cicame Steel Die CSA Alu Die CSA Steel Die TJ6 TJ7 TJ8 TJA-0 TJA- TJA-6 TJA-7 TJA-60 TJA-8 TJA-9 TJA-6 TJA-6 TJ TJA-6 TJSB TJA-7 TJA-8 TJA-69 TJA- TJA-7 TJA- TJA- TJA- TJA-65 TJA-6 TJ TJA- TJ5 TJ TJA- TJA-67 66,8 66,8 66,8 0,,, 97,5 97,5 97, , ,5 556,5 556, ,6 666,6 75,5 75,5 75,5 685, 6 75,5 6/7 6/7 8/ 8/ 8/ 6/7 /7 8/ 6/7 /7 8/ /7 6/7 /7 /7 /7 6/7 /7 /7 5/7 5/7 6/7 5/7 /7 /7 5/7 6/7 /7 /9 /9 /7 AJ-7.0 AJ-7.0 AJ-7.0 AJ-7.0 AJ-7- AJ-7.07 AJ-7.07 AJ AJ-85.0 AJ-85.0 AJ AJ-85. AJ-85.0 AJ-85.0 AJ-85-0A AJ AJ AJ AJ-0.0A AJ-0.0 AJ-0.0 AJ-0.0 AJ-0.0 AJ-0.0 AJ-0.0A AJ-0.0 AJ-0.0 AJ-0.0A AJ-.0 AJ-.09 AJ-.0 SJ-85.0 SJ-85.0 SJ-85.0 SJ-85.0A SJ-85.0 SJ SJ-85. SJ-85.0 SJ SJ-9.0 SJ-85.8 SJ SJ-9.0 SJ-9.06 SJ SJ-9.08 SJ-9.0 SJ-9.0 SJ-0.0 SJ-9.0 SJ-0.0 AJ-0.06 SJ-0.0 SJ-9.09 SJ-9.09 SJ-0.0 SJ-0.07 SJ-9.00 SJ-.05 SJ-.0 SJ ,8 0,8 0,88 0,8 0,78 0,8 0,8,5,,,,9,,7,,,,7,06,9,05,0,05,9,87,98,95,88,7,78,58 A- A- A- S-0 S-0 S-0 S-0 S-0 S-0 S- S- S Tel:
4 Full Tension Compression Joint Assemblies TJA- TJA- TJA-67 TJA- TJA- TJA-68 TJ0 TJ TJ TJA-69 TJA-69 TJ TJA-65 TJ 86,9 87, ,5 0,5 08,7 9,5 5/7 6/7 /7 5/7 5/7 /7 /9 5/7 5/7 /7 /7 5/9 /7 5/9 AJ-.0 AJ-.0 AJ-.0C AJ-.05 AJ-.05 AJ-.05 AJ-.0 AJ-.0 AJ-.0 AJ-.0C AJ-.0C AJ-.05 AJ-.0 AJ-.06 SJ-0.06 SJ-0.0 SJ-85.0 SJ-0.07 SJ-0.07 SJ-0. SJ-.0 SJ-.0 SJ-.0 SJ SJ SJ-.0 SJ-.06 SJ-.05,5,7,7,,,8,7,9,,8,8,,,08 A- A- A- A- A- A- A- A- A- A- A- A- A- A- S-0 S-0 S-0 S-0 S-0 S- S- S- S- S- S- The complete compression joint for ACSR is covered by one catalogue number. The joint consists of a tubular aluminium joint, a tubular steel compression joint and a aluminum filer plug. The aluminium compression joints for assembles TJA-7 to TJA-95 are conterbored and an aluminium filler is supplied with these assembles. Theses assemblies are for extra high strength strandings of ACSR. Dies for Model -TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 00-S/D Compressor have prefix D. Example: CD, JD, D, CD, JD, D. Max. size die for Model -TON Compressor: CD, CD Tel:
5 Catalog Number Conductor Size Kcmil Conductor Size Stranding Number of,8 Diameter Holes in lug A Sizes (mm) B Sizes (mm) Approximative Mass kg/each Cicame Die CSA Die AT-7.0N AT-7.0N AT-7.06N AT-7.0N AT-7.N AT-7.07N AT-7.0N AT-85.05N AT-85.0N AT-85.00N AT-85.N AT-85.0N AT-85.08N AT-85.0N AT-85.06N AT-85.08N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-.0N AT-.09N AT-.0N AT-.0N AT-.0N AT-.05N 66,8 66,8 0 0,, 0 97,5 97, , 556,5 556,5 556, ,6 666,6 685, 75,5 75,5 6 75,5 86,9 87,5 6/7, 6/7 8/ 6/7 8/ 8/ 6/7, /7 /7 8/ 6/7, /7 8/ /7 6/7, /7 /7 /7 6/7 /7 /7 5/7, /7 5/7, 6/7 /7 5/7 /7 /7 /7 5/7, 6/7 /9 /9 /7 5/7, 6/7 /7 5/ ,7 0,7 0,65 0,7 0,7 0,65 0,6 0,8 0,6 0,8 0,8 0,79 0,78 0,79 0,78 0,78,,,,,,,,,,5,5,5,5,5,5 A- A- A- A- A- A Tel:
6 Aluminum Jumper Terminals (ACSR) AT-.0N AT-.05N AT-.07N AT-.05N AT-.0N AT-.0N AT-.0N AT-.0N AT-.0N AT-.05N AT-.0N AT-.06N AT-.05N AT-.06N AT-.0N AT-.05N AT-.07N AT-.07N AT-.06N AT-.05N AT-.06N AT-.08N AT-.0N AT-.0N AT-.0N ATL-85.0N ATL-85.06N ATL-85.0N ATL-85.0N ATL-85.0N ATL-85.05N ATL-85.0N ATL-85.07N ATL-.0N 87, ,5 0,5 08,7 9,5 9, ,5 5,5 50,5 50, ,8 0,8, ,9 90,8 0, 0, /7 5/7 /7 /7 /9 5/7 5/7 /7 /7 5/9 /7 5/9 /7 /7 5/9 5/9 /7 /7 5/9 /7 /7 5/9 5/9 8/7 7/7 /7 /7 /7 /7 /7 /7 8/7 /7 6/ ,5,5,5,5,8,77,7,77,77,7,7,68,7,68,88,8,88,88,8,8,8,8,98,98,0 0,9 0,9 0,87 0,87 0,87 0,85 0,87 0,85, A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- A- Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 5 angle to permit the terminal to be bolted in either the straight or offset position. /- UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model -TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 00-S/D Compressor have prefix D. Example: CD, JD, D. Max. size die for Model -TON Compressor : CD, CD Tel:
7 Catalog Number Conductor Size Kcmil Number of,8 Diameter Holes in lug A (mm) B (mm) Approximative Mass kg/each Cicame Die CSA Die AT-7.0N AT-7.N AT-7.N AT-7.07N AT-7.07N AT-85.0N AT-85.09N AT-85.00N AT-85.0N AT-85.0N AT-85.08N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.0N AT-0.08N AT-0.08N AT-.09N AT-.09N AT-.0N AT-.05N AT-.05N AT-.0N AT-.0N AT-.08N AT-.08N AT-.07N AT-.07N AT-.06N AT-.0N 0, 50 97, , , , ,5 00 9, , ,7 0,7 0,66 0,6 0,6 0,8 0,8 0,8 0,8 0,8 0,78,,,,,,7,7,5,5,5,5,5,77,77,75,75,7,7,67,88 A- A- A- A- A- A- A- A- A- A- A- A- A Tel:
8 Aluminum Jumper Terminals (ASC) AT-.0N AT-.05N AT-.05N AT-.0N AT-.0N AT-.0N AT-.0N , ,88,8,8,07,07, A- A- A- A- A- A- A- Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 5 angle to permit the terminal to be bolted in either the straight or offset position. /- UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model -TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 00-S/D Compressor have prefix D. Example: CD, JD, D. Max. size die for Model -TON Compressor : CD, CD Tel:
9 Catalog Number Conductors ACSR & ASC (AWG) Conductors ACSR & ASC (Type) A (mm) B (mm) C (mm) D (mm) Bolt Size UNC Approximative Mass kg/each Cicame Die ACNOR Die AT-.0N AT-.0N AT-.05N AT-5.05N AT-5.06N AT-6.05N AT-6.07N AT-.0N AT-.0N AT-5.0N AT-5.05N AT-6.0N AT-.0N AT-5.0N AT-5.0N AT-5.05N AT-.0N AT-5.0AN AT-5.0N AT-6.09N AT-6.0N AT-6.0N /0 /0 /0 /0 5 /0 /0 /0 / / & Type 00 6/ & Type 00 6/ & Type 00 6/ & Type 00 6/ & Type 00 6/ & Type 00 6/ & Type 00 Type 50 Type 50 Type 50 Type 50 Type 50 Type 00 Type 00 Type 00 Type 00 Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium ,8,8,8 6,5 6,5 8 8,8,8 6,5 6,5 8,8 6,5 6,5 6,5,8 6, 6, /8 /8 /8 / / / / /8 /8 / / / /8 / / / /8 / / / / / 0,05 0,8 0, 0, 0, 0,5 0,5 0, 0,8 0, 0, 0,7 0, 0, 0, 0, 0, 0,7 0, 0,5 0, 0, A- A- A- A-6 A-6 A- A- A-6 A- A- A-6 A-6 A Tel:
10 Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 5 angle to permit the terminal to be bolted in either the straight or offset position. /- UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model -TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 00-S/D Compressor have prefix D. Example: CD, JD, D. Max. size die for Model -TON Compressor : CD, CD Tel:
11 Catalog number Size Container T service range T service range Drop point Type of grease Application CIC-00 CIC-00CART CIC-0 CIC-0 6 oz 6 oz gallon 5 gallons Bottle Cartridge Can Pail -5ºC à 60ºC -5ºC à 60ºC -5ºC à 60ºC -5ºC à 60ºC -ºF à ºF -ºF à ºF -ºF à ºF -ºF à ºF 7ºC / 585ºF 7ºC / 585ºF 7ºC / 585ºF 7ºC / 585ºF Suspended zincal/al particles and Al/Cu Suspended zincal/al particles and Al/Cu Suspended zincal/al particles and Al/Cu Suspended zincal/al particles and Al/Cu Non-toxic, inflammable and stable over a wide temperature range. Contains fine zinc particles suspended in a high temperature resistant base. The particles help to break through the thin protective oxide film which forms on bare aluminum surfaces. The compound provides low initial contact resistance and by excluding air and moisture from the contact surfaces, avoids deterioration of the connection due to oxidation or corrosion. Tel:
12 Catalog number Min. cable diameter (mm) Max. cable diameter (mm) Length (mm) Holes in pad Approx. Weight (kg) Cicame die CSA Die ORF-7. ORF-7./ ORF-7 ORF-7/ ORF-85. ORF-85./ ORF-85 ORF-85/ ORF-0. ORF-0 ORF-. ORF- ORF-. ORF- ORF- ORF A- A- A- A- A- A- CSA-8 CSA-8 CSA-8 CSA-8 CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- In cases where the conductor diameter falls within the range of diameters of two different catalogue numbers of repair sleeve, order that catalog number which requires the same compressor die as the compression joint used on the job. Dies for Model 6-TON tool have prefix WD. (max size CSA-) Dies for Model -TON tool have prefix CD. (max size CSA-) Dies for Models 60-TON tool have prefix JD. Dies for Model 00-TON tool have prefix D. Example: WD, CD, JD, D. See tooling section for more information on dies. Cables : Aluminum-steel reinforced conductors (ACSR), All Aluminum Conductor (ASC) Connectors : T-tap, open-run, compression Tel:
13 Catalogue number Min. cable diameter (mm) Max. cable diameter (mm) Length (mm) Approx. Weight (kh) Cicame die CSA Die ARS-7. ARS-7 AR. AR ARS-0. ARS-0 ARS-. ARS- ARS-. ARS- ARS- ARS A- A- A- A- A- A- CSA-8 CSA-8 CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- CSA- These repair sleeves are an easily applied product for repairing conductors at points where, through accident or carelessness, a few of the aluminum strands of a multi-strand conductor are broken or several strands are severely scored but not to the extend of requiring a splice. They are therefor a handy accessory during erection of conductors. They are also valuable for maintenance repairs in cases where the outside layer of conductor is damaged by electric arcs. They should not be confused with compression joints, which are intended for connecting the ends of two separate pieces of conductors. In cases where the conductor diameter falls within the range of diameters of two different catalogue numbers of repair sleeve, order that catalog number which requires the same compressor die as the compression joint used on the job. Dies for Model 6-TON tool have prefix WD. (max size CSA-) Dies for Model -TON tool have prefix CD. (max size CSA-) Dies for Models 60-TON tool have prefix JD. Dies for Model 00-TON tool have prefix D. Example: WD, CD, JD, D. See tooling section for more information on dies. Cables : Aluminum-steel reinforced conductors (ACSR), All Aluminum Conductor (ASC) Connectors : repair sleeve, compression Tel:
14 Catalog number Size Container T service range Drop point Application CIC-05HT CIC-05HT-CART 6 oz 6 oz Bottle Cartridge -5ºC à 60ºC -ºF à ºF 7ºC / 585ºF Filler -5ºC à 60ºC -ºF à ºF 7ºC / 585ºF Filler Non-toxic, inflammable and stable over a wide temperature range. The compound provides low initial contact resistance and by excluding air and moisture from the connector and conductor, avoids deterioration of the connection due to oxidation or corrosion. Tel:
15 Reference AAC run ACSR run Dia min-max run (mm) AAC tap ACSR tap Dia min-max tap (mm) A (mm) B (mm) Tightening Torque BCT BCT BCT BCT BCT BCT BCT BCT / / N.m / 0 inch pound N.m / 0 inch pound N.m / 0 inch pound N.m / 0 inch pound N.m / 0 inch pound 5 N.m / 80 inch pound 5 N.m / 80 inch pound 5 N.m / 80 inch pound BCT Connector Tel: Powered by TCPDF (
CONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
Jumper Terminals and Tee Taps. delivery
Jumper Terminals and Tee Taps delivery November 017 November 017 Jumper Terminals & Tee Taps Index Compression/Aluminum JTS... Straight Pad for AAC, AAAC, ACAR & ACSR Conductor... -1 JTF... 15 Degree Pad
Standard Compression Dead End for ACSR and ACSS Conductor CAUTION: ACSR Dead Ends Cannot Be Used on ACSS HT Conductor
INS-ACA089 Installation Instructions Standard Compression Dead End for ACSR and ACSS Conductor CAUTION: ACSR Dead Ends Cannot Be Used on ACSS HT Conductor 1. Mark the conductor a distance of 3 /4 the length
DISTRIBUTION PRODUCTS
DISTRIBUTION PRODUCTS INDEX SECTION DI OTHER DISTRIBUTION SERIES DESCRIPTION PAGE WILDLIFE PROTECTORS CC101 / CC170.. CUT-OUT COVER, ONE PIECE WILDLIFE PROTECTOR... DI-3 GS... ONE PIECE WILDLIFE PROTECTOR...
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22
2 K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22 EKM 60 UNV + UA22 EK 60 UNV + UA22 THK 22 PK 22 PK 60 UNV + UA22 Crimping dies R 22 Crimping die set, 6-240 ² R 22 in plastic case, 10-pce. Tubular cable
Heat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
3M Brand Composite Conductor Connector Current Cycle Qualification Test for 795 kcmil Compression Connectors
3M Brand Composite Conductor Connector Current Cycle Qualification Test for 7 kcmil Compression Connectors 3M Company Purchase Orders 0000797063 and 0000866974 NEETRAC Project Number: 03-071 September,
Heat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength
3M 477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength Principal Investigator: Dr. Kamal Amin Reviewed by: Dr. Colin McCullough Date of Report: June 1, 2003
PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors
MARCH 2017 PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance
3 Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance 1 Contents Installation Guidelines and Maintenance for ACCR Aluminum Conductor Composite Reinforced 1. Introduction 4 2.
DISTRIBUTION CONNECTORS SECTION DF COMPRESSION TERMINALS. Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs
DISTRIBUTION CONNECTORS COMPRESSION TERMINALS Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs SECTION VERSAtile ALUMINUM COMPRESSION TERMINAL TYPE VCEL For use with either
Compression Hardware Series For ACSR Conductors
Compression Hardware Series For ACSR Conductors PAGE 4 5 6 7 CONTENTS Compression Dead-end - CMPDE Compression Jumper Terminal - CMPTM Compression Dead-end assembly - cmpdej compression splice assembly
Chapter 1. Connectors & Fittings for Railways
Chapter Connectors & Fittings for Railways Current Carrying Catenary Dropper Component N Messenger Bz Cable length from L Component N 3 Component N 2 Contact Wire SNCF approved This dropper provides a
Jumpers & Load Pickup Tools
Jumpers & Load Pickup Tools Catalog 2300 May 2016 Jumpers & Load Pickup Tools 2300 May 2016 Page 2301 All Chance Insulated Jumpers meet ASTM F 2321 Standard Specification. G4758 15kV 5 5 / 8 " G4765 25kV
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
Meets requirements of Safety for Handheld, Motor-Operated Electric Tools (UL , CSA C22.2 No )
Meets OSHA Mandated Electrical and Mechanical Product Safety Requirements Certified by CSA, an OSHA accredited NRTL (nationally recognized test lab) to meet mandatory OSHA requirements Meets requirements
477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength
3M 477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength Principal Investigator: Dr. Kamal Amin Reviewed by: Dr. Colin McCullough Date of Report: June 1, 2003
DISTRIBUTION CONNECTORS
SECTION ANDERSON VERSA-CRIMP BATTERY POWERED ACSR CUTTING Model VCACSRCCBP is used to cut ACSR, aluminum, and copper conductors up to 1.50". Cuts standard guy wire and ground rod sizes up to 5/8". This
Grounding Busbars. Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets.
LINE CARD Grounding Exothermic Lightning Protection Grounding Busbars Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets. 2 Grounding Busbars & Kits s GBI14210G
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
PRODUCT SHEET. Elastimold advanced connection system (shear bolt)
PRODUCT SHEET Elastimold advanced connection system (shear bolt) 2 Elastimold cable accessories The Elastimold advanced connection system - shear bolt is the latest solution to be incorporated into the
3M Mechanical Shearbolt Connectors, QCI Series
M Mechanical Shearbolt Connectors, QCI Series Data Sheet November 2011 Description Connector Contents M Mechanical Shearbolt Connectors, QCI Series are designed to cover a wide range of conductor sizes
Accepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
B T T T 2.11 MY29-11 (1) 4/0 AWG - MY29-11 (1) W30VT (2) U30RT (2) 300 kcmil 150 W30VT (2) YA30L-2TC W30RT (2) U28ART (2)
URNDY TWO HOLE HYLUG CODE CONDUCTOR STANDARD ARREL (Continued) T T T Fig. 1 Fig. 2 Fig. 3 Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
BURNDY Compression. TWO HOLE HYLUG CODE CONDUCTOR STANDARD BARREL (Continued) Fig. 1 Fig. 2 Fig. 3. Conductor
URNDY TWO HOLE HYLUG CODE CONDUCTOR STANDARD ARREL (Continued) T T T Fig. 1 Fig. 2 Fig. 3 C-46 Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Underground Distribution
Aluminum Flood-Seal TM Mechanical Connectors Save outlet space These connectors feature the Sweetheart TM outlet configuration that nests two equal-sized service cables from #6 to 2/0 or two different-sized
PRODUCT BROCHURE. Elastimold advanced connection system (shear bolt)
PRODUCT BROCHURE Elastimold advanced connection system (shear bolt) 2 ELASTIMOLD ADVANCED CONNECTION SYSTEM (SHEAR BOLT) Elastimold cable accessories The Elastimold advanced connection system shear bolt
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY connectorproducts.com 1300 John Tipton Blvd. Pennsauken, NJ 08110 Phone: 856.829.9190 Fax: 856.829.9195 Catalog IX.1 American Design American Made Our success
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Cartridge Heaters CARTRIDGE
Hotwatt manufactures a wide range of cartridge heating units for a variety of applications. This size, sheath, leads, terminals, wattage and voltage can be adapted to your heating requirements. Hotwatt
EXCLUSIVE AUSTRALIAN DISTRIBUTORS
Helical Fittings EXCLUSIVE AUSTRALIAN DISTRIBUTORS B4/1 Introduction in helical fittings Helical fittings are composed of single helical rods which -according to the respective application - are separate
ARMOR-GRIP Suspension: Double
: Double For Line Angles Between 30 and 60 ACSR, All-Aluminum, Aluminum Alloy, AWAC Compacted All-Aluminum Compacted ACSR, ACSS, ACSS/TW Range AGS s AGS AGS s & Min. Max. Nominal Conductor Size s Per Set
3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit
3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7622-T-110, 7624-T-110, 7625-T-110, 7626-T-110 Instructions
TENSION CLAMPS AND JOINTS. General Wedge tension clamp without jumper guide, for aluminium based conductors... 79
73 Contents General.................................................................................................. 74 Wedge tension clamp without jumper guide, for aluminium based conductors...........................
Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN
3 Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class 350 kv BIL IEC 60840 72,5 kv Kit Contents: 1 Silicone Rubber Lug Seal Insulator
Armor Rods. Armor Rods NOMENCLATURE GENERAL RECOMMENDATIONS
Transmission: Section 1 NOMENCLATURE Single Support and Double Support : Identified by S and D appearing in the length column on the catalog page. Should the maximum distance between tied supports exceed
E R C. R E R C ; ; W T E C
WTEC and its affiliates is an engineering, manufacturing, procurement and construction company dedicated to the alternative energy market. It designs and produces products to move energy from the generation
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,
Underground Bus Bar Distribution System 03 SEP 13 Rev B
Application Specification 114-24006 Underground Distribution System 03 SEP 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
DRILL CORD. Insulation Nominal Size. Approximate Amps Anixter. Number Number Thickness O.D.
DRILL CORD Synthetic Rubber Insulation 75 C, 600 Volts For use on drills and other mining equipment. For use on circuits not exceeding 600 volts at a maximum conductor temperature 75 C. 1. CONDUCTOR: Flexible,
T CLASS T FUSE BLOCKS
Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
K Crimping dies HIS 13
Copper tubular cable lugs and connectors, standard design For connectors see assembly instructions for connector materials (general Insulated tubular cable lugs and connectors H 0/25 H 0/42 H 0 U E 0/25-L
Terminations. 3M Cold Shrink Terminations FAX TERMINATIONS. Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M
Terminations Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M Cold Shrink QT-III Silicone Rubber Terminations 265 3M Cold Shrink Termination QT-III 69 kv/72,5 kv 270 3M Cold Shrink
Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance
Aluminum Conductor Composite Reinforced Installation Guidelines and Maintenance 1 Contents Installation Guidelines and Maintenance for 3M ACCR Aluminum Conductor Composite Reinforced 1. Introduction.4
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
Manufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
Slack Span Dead-end GENERAL RECOMMENDATIONS NOMENCLATURE (440)
NOMENCLATURE Material Helical Leg Section: Aluminum covered steel. An aluminum alloy version is available for corrosive environment. Contact PLP. Crossover Marks: Indicates starting point for application
3M Cold Shrink QT-lll Silicone Rubber Indoor Tubular Termination Kits With High-K Stress Relief
3M Cold Shrink QTlll Silicone Rubber Indoor Tubular Termination Kits With HighK Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7693T150, 7695T150, 7696T150 Instructions IEEE Std. No. 48
Easy-On II Terminations
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables, concentric neutral, metal tape shielded or wire shielded cables without need for additional
Good for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
Heating Cable. Construction
Mineral Insulated High Temperature A C Constant Wattage Series Resistance Heating Cable Sets Process Temperature Maintenance to F (593 C) Maximum Exposure Temperature 4 F (76 C) (Power Off) Corrosion Resistant
Conductor Protection. results
Conductor Protection results Conductor Protection Index Dampers 607... Vibration Damper 4R Stockbridge...1 Armor Rods AP8... Aluminum Armor Rods...6 APS... alvanized Steel Armor Rods...8 APAS... AluminumClad
ARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
Jumpering and grounding equipment and assemblies
Supersedes 325-50 July 2014 Jumpering and grounding equipment and assemblies Contents Description Page Jumpering Equipment Load Pickup Clamps... 2 Jumper Clamps.... 3 Jumper Components.... 4 C-Type Grounding
Universal tools. Hand-operated hydraulic universal tool, hydraulic universal head 472. Battery powered universal tools 475. Bus bar tool centre 479
Universal tools Hand-operated hydraulic universal tool, hydraulic universal head 472 Battery powered universal tools 47 Bus bar tool centre 479 471 Universal tools ONE TOOL FOR ALL SITUATIONS - UNIVERSAL
Loadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief For Tape Shielded, Wire Shielded and UniShield Cable 7685-S-8 Instructions IEEE Std. No. 48 Class 1 Termination 35
3M Cold Shrink Splice Kits, QS T Series
3M Cold Shrink Splice Kits, QS-2000-3T Series For 15 kv Trifurcating Transition Splice Kits Data Sheet October 2011 Description 3M Cold Shrink Splice Kits, QS-2000-3T Series for 15 kv Trifurcating Transition
SECTION 3 - PRIMARY CONSTRUCTION OVERHEAD TABLE OF CONTENTS
03.00 GENERAL CONSTRUCTION NOTES PRIMARY CONSTRUCTION PRIMARY CONSTRUCTION PIN INSULATOR INSTALLATION 03.00-02 03.00-04 03.00-20 03.02 CONNECTORS AUTOMATIC SPLICE INSTALLATION 03.02-01 INSTALLATION GUIDE
3M Cold Shrink QT-III Silicone Rubber Indoor Termination Kits With High-K Stress Relief
3M Cold Shrink QT-III Silicone Rubber Indoor Termination Kits With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7621-T-95, 7622-T-95, 7624-T-95, 7625-T-95 Instructions IEEE Std.
3M Cold Shrink QT-lll Silicone Rubber Skirted Termination Kit 7692-S-4, 7693-S-4, 7694-S-4, 7695-S-4, 7696-S-4
3M Cold Shrink QT-lll Silicone Rubber Skirted Termination Kit 7692-S-4, 7693-S-4, 7694-S-4, 7695-S-4, 7696-S-4 With High-K Stress Relief For Tape Shielded, Wire Shielded and UniShield Cable Instructions
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
Cold Shrink QS T Trifurcating Transition Splice Kit
Cold Shrink QS2012-13-3T Trifurcating Transition Splice Kit Instructions IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice Cable Size Range Requirements PILC 500 kcmil Conductor Size (240 mm 2
Type Termination Cable Size Copper Aluminum 2 CP2C1-1/0 CP1/0C1-2/0 CP2/0C1-4/0 CP4/0C1 CP4/0A1. Cable 250kcmil CP250C3 CP250A3
C 600V rotectors ECIL UROE Description # for Type Type Termination ize Copper luminum 2 C2C1-1/0 C1/0C1-2/0 C2/0C1-4/0 C4/0C1 C4/01 250kcmil C250C1 C2501 1 to 350kcmil C350C1 C3501 400kcmil C400C1-500kcmil
UK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS Made from high impact, UV resistant, polyvinyl chloride (PVC), they are non-corrosive and do not abrade the conductor or require
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
Our overhead products go above and beyond all others. QUICK REFERENCE. Overhead Connectors. & Covers. Overview
Overview QUICK REFERENCE Overhead Connectors & Covers page(s) Our overhead products go above and beyond all others. We have plenty of overhead connectors. From transformer eyebolts and stirrup connectors
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING NON-NETWORK SYSTEMS
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DEPARTMENT NON-NETWORK SYSTEMS SPECIFICATION EO-100186 REVISION #10 MAY 2007 EFFECTIVE DATE MAY
04.02 SPLICES AUTOMATIC SPLICE INSTALLATION ONE PIECE COMPRESSION SPLICE SPLICING SLEEVES AND DIE SIZES FOR ALUMINUM AND COPPER CONDUCTORS
4. GENERAL INSTALLATION GUIDE FOR CONNECTORS 4. INSTALLATION GUIDE FOR CONNECTORS 4.4 ELECTRIC CONTACT INHIBITORS 4.6 CONDUCTOR CLEANING TOOLS 4.8 4. SPLICES AUTOMATIC SPLICE INSTALLATION AUTOMATIC SPLICE
ADDER SYSTEM CABLE L
17 Introduction CALE LADDE The ICMS cable ladder system consists of a wide range of aluminum and Steel cable ladders, Fittings and accessories. Ladder Trays are available in two models: Tubular rungs mechanically
Strip Heaters Mica Insulated
Mica Insulated U.L. Recognized-E56973 C.S.A. Certified 016386-0-000 Applications Dies, Cylinders, Kettles, Molds, Process Machines, Platens, Tanks, or other applications where controlled heating is needed.
Instruction Sheet Crimping Die Assemblies , , and
Instruction Sheet Crimping Die Assemblies 08-8 986-1, 98-1, and 988-1 1 Mar 11 Moving Dies Color Code For complete instructions concerning the related applicators or machines, refer to the customer documents
Loadbreak Apparatus Connectors
Loadbreak Apparatus Connectors 200 A 25 kv Class POSI-BREAK Loadbreak Elbow Connector with Optional Integral Jacket Seal* Electrical Apparatus 500-29-7 general The POSI-BREAK Loadbreak Elbow Connector
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
JOSLYN. Underground Cable Accessories. Table of Contents. JPT/JIPT Polymer Terminations. ShrinkTite Sealing Kits. Easy-On II Terminations
Underground Cable Accessories JOSLYN Table of Contents JPT/JIPT Polymer Terminations 15kV, 25kV & 35kV ShrinkTite Sealing Kits 1kV In-Line Splice Sealing Kit Cable Jacket Sealing Kit Easy-On II Terminations
Installation Instructions for TMQV Circuit Breakers and Molded Case Switches
DEH41188 Installation Instrucitons Contents Description Introduction............................. Installation.............................. Manual Operation........................ Inspection and Field
Connector System Guide Compression Connectors Grounding Connectors Tools for Industrial Electrical Applications
Connector System Guide Compression Connectors Grounding Connectors Tools for Industrial Electrical Applications Step One Preparing the Cable Strip the insulation carefully to avoid nicking or cutting conductors
200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
Loadbreak Connectors CA650101EN Supersedes 500-29-7C November 2011 COOPER POWER SERIES 200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition
Wagner Die Supply. Diemaking & Diecutting Source and Resource H E N D E R S O N S T O R A G E S Y S T E M S.
H E N D E R S O N S T O R A G E S Y S T E M S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL Original Rotary Die Storage Half-Height Unit adds on to Original Unit Rotary cutting dies are stored easily
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0