K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22
|
|
|
- Alaina Short
- 6 years ago
- Views:
Transcription
1 2 K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22 EKM 60 UNV + UA22 EK 60 UNV + UA22 THK 22 PK 22 PK 60 UNV + UA22 Crimping dies R 22 Crimping die set, ² R 22 in plastic case, 10-pce. Tubular cable lugs and connectors - Cu, standard type Tubular cable lugs for switchgear connections ² 6 R R R R R R R R R R R R R Tubular cable lugs and connectors - Cu, standard type Tubular cable lugs for switchgear connections Crimping dies IS 22 R22SET16240 Insulated tubular cable lugs and connectors Insulated pin terminals ² 10 IS IS IS IS IS IS IS IS IS
2 Crimping Crimping dies Crimping dies F 22 Tubular cable lugs and connectors for fine stranded conductors ² 10 F F F F F F2270 Crimping dies M 22 Tubular cable lugs and connectors for solid conductors ² M M M Presseinsätze N 22 Tubular cable lugs and connectors - Ni Tubular cable lugs and connectors - stainless steel ² 10 N N N N N2250
3 Crimping dies D 22 Crimping dies DP 22 2 Compression cable lugs to DIN and connectors to DIN 46267, part 1 - Cu ² Code 6 D D D D D D D D D D D D D Crimping die set, ² D 22 in plastic case, 10-pce. Double compression cable lugs ² Code 2 x 50 DP DP 2 x 70 DP DP Crimping dies Q 22 Solderless terminals to DIN and pin terminals to DIN Cu Solderless connectors to DIN Cu ² 10 Q Q Q Q Q Q2270 Compression cable lugs to DIN and connectors to DIN 46267, part 1 - Cu Crimping dies ISQ 22 D22SET16240 Insulated solderless terminals and pin terminals ² 10 ISQ ISQ ISQ ISQ ISQ ISQ2270
4 Crimping Crimping dies Crimping dies RU 22 Crimping die set, ² A 22 in plastic case, 10-pce. Pre-rounding of sector-shaped Al- and Cu-conductors 3- and 4-core sector-shaped conductors Nominal cross section ² se Nominal cross section ² sm Conductor dia. 10 RU Pre-rounding width 16 RU RU RU RU RU RU RU RU RU RU Crimping dies A 22 Compression cable lugs and connectors to DIN - Al Compression cable lugs and connectors Al/Cu (aluminium side) ² Code 10 A A A A A A A A A A Compression cable lugs and connectors to DIN - Al Compression cable lugs and connectors Al/Cu (aluminium side) Crimping dies AD 22 A22SET Compression joints for full tension connections of Aldrey conductors according to DIN EN Al-conductor acc. to DIN EN 50182, ² ² Code 25 AD AD AD AD AD AD AD
5 Crimping dies AST 22 Crimping dies C 22 / MC 22 2 Compression joints acc. to DIN 48085, part 3 for Al-/St-cable acc. to DIN EN Aluminium crimping ² Code 25-4 AST AST AST AST AST AST C-clamps ² 16 C C C C MC MC MC Crimping dies ST 22 Crimping dies H 22 Compression joints acc. to DIN 48085, part 3 for Al-/St-cable acc. to DIN EN Steel crimping ² Code ST ST ST ST H-clamps ² 70 H2270 5
6 Crimping Crimping dies Crimping dies AE 22 Crimping dies ZAE 22 Cable end-sleeves Additional information * = Not suitable for THK 22 due to opening width ² 10 AE AE AE AE AE AE AE AE AE * AE * AE Twin-cable end-sleeves ² 2 x 4 ZAE x 6 ZAE x 10 ZAE x 16 ZAE Crimping dies ZAES 22 Crimping dies AES 22 Twin-cable end-sleeves Special trapezoid crimp for fine stranded conductors Cable end-sleeves Special trapezoid crimp for fine stranded conductors Technical instructions ² 2 x 4 ZAES x 6 ZAES x 10 ZAES x 16 ZAES Additional information * = Not suitable for THK 22 due to opening width ² 10 AES AES AES AES AES AES AES AES AES * AES * AES
K Crimping dies HIS 13
Copper tubular cable lugs and connectors, standard design For connectors see assembly instructions for connector materials (general Insulated tubular cable lugs and connectors H 0/25 H 0/42 H 0 U E 0/25-L
Battery powered crimping tool
www.klauke.com Battery powered crimping tool, Series New: E 0/-L by lauke Verbindungen mit System The Power of Partnership Für auswechselbare Einsätze der Serie 22, Schmalpressung Crimping and cutting
Compression cable lugs and compression joints according to DIN
Compression cable lugs and compression joints according to DIN Compression cable lugs Al.2 Compression cable lugs AL-St / Bi-metallic washers (cupal).4 Bi-metallic compression cable lugs.5 Compression
Compression cable lugs and compression joints according to DIN
Compression cable lugs and compression joints according to DIN Tubular compression cable lugs Cu DIN 4635. Angle compression cable lugs Cu.4 Compression cable lugs with two long holes in the palm.8 Compression
Electrical connection systems
1 Electrical connection systems Copper tubular cable lugs and connectors 10 Tubular cable lugs 10 Tubular cable lugs for switchgear connections 16 Angle tubular cable lugs 17 Connectors 21 Insulated tubular
Universal tools. Hand-operated hydraulic universal tool, hydraulic universal head 472. Battery powered universal tools 475. Bus bar tool centre 479
Universal tools Hand-operated hydraulic universal tool, hydraulic universal head 472 Battery powered universal tools 47 Bus bar tool centre 479 471 Universal tools ONE TOOL FOR ALL SITUATIONS - UNIVERSAL
Around the cable. Socket sleeves.... convincing solutions
Around the cable Socket sleeves... convincing solutions Socket sleeves (male and female) Socket sleeves (female) with cable stop bare brass not insulated, to DIN 46247/part 1-3 and similar Art. no. CSS
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
CONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
TOOLS FOR PROFESSIONALS ELECTROTECHNICAL PRODUCTS.
TOOLS FOR PROFESSIONALS ELECTROTECHNICAL PRODUCTS www.intercable.eu Hydraulic cutting tools 25 mm Designed to cut aluminum, copper and steel cables up to a diameter of 25 mm. Description Order ref. q approx.
HYDRAULIC CRIMPING TOOL HT51
1 HYDRAULIC CRIMPING TOOL HT51 general features This two speed lightweight and compact, hydraulic tool is ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can
185mm-System power 2500A. Expertise
185mm-System power 2500A Expertise System advantages The 185mm-System power is designed for use in efficient power distribution assemblies with a high short-circuit withstand capacity. The narrow design
PRODUCT CATALOG Electrical components and enclosure accessories. Get familiar with Ouneva products online:
PRODUCT CATAOG 2017 Electrical components and enclosure accessories Get familiar with Ouneva products online: www.ounevaproducts.fi Ouneva Group Ouneva Group is a 40 years old family company. Ouneva Group
GENERATION SAFETY PLUS. Battery-operated crimping, cutting and universal tools
GENERATION SAFETY PLUS Battery-operated crimping, cutting and universal tools Safety Plus a generation with a real added value The new standard Battery powered Crimping- and Cutting Tools from Klauke have
JIGO JIGO HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006)
HEAVY DUTY CONNECTORS HEAVY DUTY CONNECTOR 6 POLE (JG-HE-006) APPLICATIONS Heavy-duty connectors are used wherever there is a need for a secure, simple and timesaving assembly of machinery and facilities.
CONNECTORS AND FITTINGS
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. Human photo.
Kcmil. Mass kg/each. Tel:
Catalog Number Conductor Size Kcmil Conductor Strand Alu Dead End Alu Jumper Steel Dead End Approximative Mass kg/each Cicame Alu Die Cicame Steel Die CSA Alu Die CSA Steel Die TD6N TD7N TD8N TD9N TDN
PRODUCT CATALOG Get familiar with Ouneva products online:
PRODUCT CATAOG Get familiar with Ouneva products online: www.ounevaproducts.fi Electrical components and enclosure accessories 2016 Ouneva Group Ouneva Group is a 40 years old family company. Ouneva Group
Cutting & Crimping Tools
Cutting & Crimping Tools Page 1 Table of Contents Code Product Page K3 Ratchet Cutter Cu/AL up to 300mm2 4 K4 Ratchet Cutter Cu/AL up to 500mm2 4 C2 Copper Aluminium Parrot Beak Ratchet Cutter C2 5 K325
Tubular compression cable lugs 6 35 mm 2, DIN material: Cu according to DIN EN surface: tin plated or optionally uncoated
Tubular compression cable lugs 6 35, DIN 6235 material: Cu according to DIN EN 13600 surface: or optionally * not standardized, tube measurements in accordance with DIN 6235 6 5 1021 5 3,7 5,5 5,3 8,5
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1
NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1 NA2XKR(AL)Y 1 x (16-800) mm² 0.6/1 kv Al / XLPE / LS / PVC / AWA / PVC (, XLPE Insuled, ed, Aluminium Wire Armor, ed) Construction Da 16 23.0 1,102 25 23.0 1,104 35 23.0
Chapter 1. Connectors & Fittings for Railways
Chapter Connectors & Fittings for Railways Current Carrying Catenary Dropper Component N Messenger Bz Cable length from L Component N 3 Component N 2 Contact Wire SNCF approved This dropper provides a
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
18V CORDLESS HYDRAULIC CRIMPING TOOL B500
1 18V CORDLESS HYDRAULIC CRIMPING TOOL B500 The next generation of Cembre cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B51 type crimping
TAE pole Contactors
TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges
INTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
Wind turbines connecting solutions
Wind turbines connecting solutions With the rapid development of wind farms in Europe and the world (nearly 15,000 today with a power of 313 GW), choosing a reliable and durable connection to connect the
Nexans Network Solutions Div. Euromold
Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories
Products Catalogue Cable Lugs, Crimping Tools & Bus Bar
Products Catalogue 2012 Cable Lugs, Crimping Tools & Bus Bar Railway series Lugs W/O Inspection Hole S b Ød 2 c 1 c 2 3D70-10 a Ød 1 Ød 3 J 3D Cat No. REF : I.C.F. d1 a b d2 d3 C1 C2 K J s 17 5 3D 5042
Cold-shrinkable Silicone 12 kv - 24 kv - 36 kv
EUROMOD NV 0/00 www.think-media.be Accessories for medium voltage power cables Terminations Cold-shrinkable Silicone kv - kv - 6 kv Catalogue 0/00 TERMINATIONS TABE OF CONTENTS COD-SHRINKABE SIICONE TERMINATIONS
Varius SUMMARY OF MODELS OF FUSE-BASE AND FUSE HOLDERS. Type SPB S3PB SPF SP4.. SP50
SUMMARY OF MODELS OF FUSE-BASE AND FUSE HOLDERS Type SPB SPB SPF SP4.. SP50 Rated current I n 60 A / 0 A / 400 A 60 A / 0 A / 400 A 60 A / 0 A / 400 A / / 60 A Rated voltage AC/DC U n 690 V 690 V 690 V
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
HYDRAULIC CRIMPING TOOL ,7. C sleeve Connectors. Purchase. separately HYDRAULIC PRESSHEAD ,6. C sleeve Connectors
HYDRAULIC CRIMPING TOOL HT 51 Crimping 50 380 130 2,7 C sleeve Connectors 120 120 70 HT 51-KV version also available for Power Supply Companies HYDRAULIC PRESSHEAD New design two speed hydraulic tool,
Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
Nexans WINDLINK connection system. Nexans Power Accessories Germany GmbH
Nexans WINDLINK connection system Nexans Power Accessies Germany GmbH Technical instructions and application infmation Reprinting, even partial, only with special allowance. The data given were determined
Nexans Power Accessories. Bolted connectors
Nexans Power Accessories Bolted connectors 1 Summary 1. The function of bolted connectors The function Physical parameters Crimped versus bolted connectors Advantages of bolted connectors 2. Presentation
Horizontal fuse disconnects
THE NAME FOR SAFETY Horizontal fuse disconnects Horizontal fuse disconnects Horizontal fuse Disconnects are used in building installations, switchgear and controlgear as well as in power utility networks.
Urgent Support to the Agriculture and Electricity Sector in the Gaza Strip
Project Number: PAL -10-00063805 Project Name: Urgent Support to the Agriculture and Electricity Sector in the Gaza Strip Bill of Quantities Package # 2 LOT 2: Supply of Electrical Materials The contract
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv
N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv Cu / XLPE / AWA / PVC (, XLPE Insuled, Aluminium Wire Armor, ed) 25 16.6 503 35 17.7 612 50 19.5 783 70 21.5 1,014 95 23.5 1,280
MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN s
Basic Efficiency up to 1500 V 1-pole 3-pole SILAS MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN successfully
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
CENTRE FEED UNIT UP TO 4000A. Safety
CENTRE FEED UNIT UP TO 000A Safety Centre feed unit New TCC section busbar: Connection options with CRITO PowerClip and CRITO ProfiClip, and terminal studs (screw in c-slot). 1-pole, side busbar support
HK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
COMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
Accepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
PIT 2,5-TG. Extract from the online catalog. Order No.:
Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:
Motor Circuit Breakers C4
Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes Model C4/32T Setting Short
POWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
VDE tested single cores according to EN (H05Z-K & H07Z-K) for more demanding requirements
VDE tested single cores according to EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements ÖLFLEX HEAT 125 C MC - halogen free single core with GL certificate, special fire performance, IEC 60332-3,
MV TERMINATIONS. INDOOR SINGLE CORE TERMINATION - ELTI-1C for polymeric cables - Slip-on termination - Modular type APPLICATION STANDARDS
MEDIUM VOLTAGE MV TERMINATIONS INDOOR SINGLE CORE TERMINATION - ELTI-1C APPLICATION Utilisation indoor. in boxes and compact switchgears. in terminal boxes located outdoor and subject to condensation.
Cu-terminals and connectors mm²
General information 2 EasyGuide 3 Tube terminals 0,75-10 ², KR Tube terminals 16-800 ², KRF 7 Tube terminals 10-1000 ², KRT 9 Tube terminals 16-1000 ², KRD 11 Tube terminals with two stud holes 70-00 ²,
PANEL-MOUNTING COMPONENTS SWITCHGEAR. Technology
PANEL-MOUNTING COMPONENTS SWITCHGEAR Technology QUADRON CrossLinkBreaker Disconnects and provides fuse protection for currents up to 100A Sizes 000 to 2 can be mounted quickly on DIN EN 50 022 rails using
UK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
TOOLING TOOLING. Free Call:
Hand Crimping Tools 90 9 Hydraulic Crimping Tools 9 Battery Crimping Tools 92 Cable Cutters 93 Cable Strippers 93 Wire Strippers 93 Amphenol Tools 94 Cable Tie Guns 94 Harnessflex Tools 94 Heat Guns 94
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,
UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated
11Across the line UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated contactor frame size A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF
POWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one con ductor per connector opening
HYDRAULIC CRIMPING TOOLS
HYDRAULIC CRIMPING TOOLS HT 51 New design two speed hydraulic tool, lightweight and compact, this tool is ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can
12-SDMS-02 REV. 05 ( )
12-SDMS-02 REV. 05 (22-05-2018) SPECIFICATION FOR LUGS AND CONNECTORS FOR LOW-VOLTAGE & MEDIUM-VOLTAGE DISTRIBUTION SYSTEM Saudi Electricity Company 1. SCOPE... 3 2. CROSS REFERENCES TO OTHER SEC STANDARDS...
Completing the picture
HIGH VoltaGe cable accessories for 72 kv up to 170 kv Completing the picture based on experience is the future nkt cables GmbH nkt was established in 1891 as cable manufacturer. in 1999 nkt a/s denmark
Corporate Standard 0001/MUC_EN Protective Conductor Connection
Corporate Standard 0001/MUCEN 1 History Version Valid from Author Modification 1st July 2008 K. Wianski / A.Triebe First edition 2 Scope of Application This corporate standard shall apply to combinations
026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
Voltage Rating Current Rating Material. Connector. Catalog/ ordering number. Catalog/ ordering number. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
Withdrawable Unit Design - Motor Feeders and Outgoing Cable Feeders
Contents Motor Feeders and Outgoing Cable Feeders Page General 9/2 Structure and Functions 9/2 WithdrawableUnit Principle 9/2 Forms of Internal Separation/Doors 9/2 Installation of Instruments 9/2 Optional
Powerlock Termination Guide
Powerlock Termination Guide Contents Index 1. OVERVIEW... 2 2. TERMINATION METHODS... 2 2.1 CRIMP TERMINATION... 2 2.1.1 Crimp Connector Components... 2 2.1.3 Crimp Tool... 3 2.1.4 Crimp Assembly Tools...
Catalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
Cu-terminals and connectors mm²
Cu-terminals and connectors 0.75-1000 ² General information 2 EasyGuide 3 Tube terminals 0,75-10 ², KR Tube terminals 16-800 ², KRF 7 Tube terminals 10-1000 ², KRT 9 Tube terminals 16-1000 ², KRD 11 Tube
Connecting with... quality
p o l I S H P R O D U C E R Connecting with... quality PRODUCT CATALOGUE 2 0 0 8 Certificates Metal Works R. Petlak General Partnership Petlak Brothers 1987 1986 1981 1938 Opening of the branch in CzeluÊnica.
Solutions for Underground Distribution Networks
Terminations, joints, lamp post fixtures Solutions for Underground Distribution Networks Reliable and Versatile From Ensto naturally Ensto solutions for the electricity distribution networks are safe,
Küba Green Line. Küba comfort DP. Ceiling Air Cooler.
Küba Green Line 47 Ceiling Air Cooler GEA Küba Application Benefits for Contractors and Operators Expanded capacity range Up to 28 kw Low draught levels Integrated air baffle plate for low air speed in
Silicone Push-on Accessories
Silicone Push-on Accessories RXS Kabelgarnituren GmbH & Co. KG 67 Push-on Straight Joint AMS 10, AMS 20 For 1-Conductor Polymer-Insulated Power Cables ) = 6 / 10 (12) kv; 12 / 20 (24) kv Design The AMS
Solutions for Underground Distribution Networks
Terminations, joints, lamp post fixtures Solutions for Underground Distribution Networks Reliable and Versatile From Ensto naturally Ensto solutions for the electricity distribution networks are safe,
Industrial connections. Chain industrial connectors. Renewable energy. Earthing. Insulation products. Cable ties and accessories
Industrial connections Chain industrial connectors Renewable energy Earthing Insulation products Cable ties and accessories Tooling and accessories SICAME GROUP Connecting Solutions A young dynamic company
Voltage Rating Current Rating Material. Connector CATALOG/ ORDERING NUMBER CATALOG/ ORDERING NUMBER. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
Catalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
Catalog Number Description
Catalog Number escription Enclosed Safety Switches Number Segment Character escription 2 N RB L=Light duty =General duty Fusible =eavy duty Type of Switch T=ouble throw U=General duty Non-Fusible U=eavy
DISTRIBUTION CONNECTORS
SECTION ANDERSON VERSA-CRIMP BATTERY POWERED ACSR CUTTING Model VCACSRCCBP is used to cut ACSR, aluminum, and copper conductors up to 1.50". Cuts standard guy wire and ground rod sizes up to 5/8". This
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Hydraulic Cutting Tools
Hydraulic Cutting Tools 15 HYDRAULIC CUTTING TOOLS New Battery powered CUTTINGTOOLS The new battery operated hydraulic cutting tools are now more ergonomic, faster and more reliable than ever Reliable
Medium voltage - Cable accessories up to 36 kv. Tapes Connection technique Tools
Medium voltage - Cable accessories up to 36 kv Tapes Connection technique Tools TABLE OF CONTENTS General information... 6 7 CAST RESIN-TECHNIQUE...8 11 Straight-through joints for polymeric-insulated
NYR(AL)Y 1 x (10-800) mm² 0.6/1 kv
NYR(AL)Y 1 x (10-800) mm² 0.6/1 kv NYR(AL)Y 1 x (10-800) mm² 0.6/1 kv Cu / PVC / AWA / PVC (, PVC Insuled, Aluminium Wire Armor, ed) Standard Specificion : IEC 60502-1 Construction Da 10 14.4 326 16 15.4
SIGUARD Safety Systems Safety Integrated
/ 3SE2 303 / 3SE2 404 and open type SIGUAR Safety Systems Safety Integrated Application The function of the position switches (limit switches) is to produce electrical signals corresponding to the positions
ERKO TECHNOLOGY FOR TRANSFORMERS MANUFACTURERS we implement individual solutions
ERKO TECHNOLOGY FOR TRANSFORMERS MANUFACTURERS we implement individual solutions Certificates 6 17 9 13 10 14 16 16 4 6 www.erko.pl SHARK Technology Shark technology is dedicated to connect winding enameled
Fuse switch disconnectors
SWITCHGEAR 62 RBK pro Fuse switch disconnectors designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links. ENERGY SAFELY
3RT14 Contactors with 3 Main Contacts
3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e
Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
Professional tools 1. From Phoenix Contact. General information
Professional tools 1 From Phoenix Contact General information Good results can only be obtained with the right tools. For this reason, Phoenix Contact offers suitable tools for each application. The product
Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
Blocks and Holders. Specifications. Voltage Rating 600 V Current Rating Based on NEC Table , using 75 C copper wire Material.
6Fuse Blocks and Holders Blocks and Holders Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed
PRODUCT INFORMATION MULTI-STANDARD SC 2.1. U.I. Lapp GmbH
GmbH PRODUCT INFORMATION USA: UL-listed (MTW), Canada: CSA (TEW), Europe: H07V-K (depending on cross s.), tin-coated strands For use in the most important global markets Reduction in technical documentation
Product brochure. ABB Fusegear EasyLine Fuse switch disconnector
Product brochure ABB Fusegear EasyLine Fuse switch disconnector 2 EasyLine Fuse Switch Disconnector ABB Fusegear Content Fuse protection 4 Technical Data 5 General 6 Apparatus overview 7 Electronic Fuse