Wind turbines connecting solutions
|
|
|
- Caitlin Marcia Harrington
- 5 years ago
- Views:
Transcription
1
2 Wind turbines connecting solutions With the rapid development of wind farms in Europe and the world (nearly 15,000 today with a power of 313 GW), choosing a reliable and durable connection to connect the electrical components of a wind turbine is essential for trouble free operation. An improper or poor quality connection can cause malfunctions and create the need for frequent and costly maintenance. Mecatraction has over 30 years of experience in industrial connections and guarantees its complete range of pre-insulated and tubular products through quality and traceability, creating confidence in mobile systems and the high stress levels that exist within wind turbines. Mecatraction has been a supplier to wind turbine manufacturers and associated systems for several years, giving the company considerable expertise in this field. Mecatraction is a subsidiary of the SICAME GROUP, a global leader in accessories for the high to low voltage markets.
3 Wind turbine connecting solutions Connecting Copper tubular lugs from 6 to 95 mm Copper tubular lugs from 120 to 240 mm Copper tubular lugs from 6 to 50 mm 2 bent at Copper tubular lugs from 70 to 240 mm 2 bent at Copper tubular lugs from 6 to 35 mm 2 bent at Copper tubular lugs from 50 to 185 mm 2 bent at Copper connectors for annealed wire...13 Two hole Nema spacing copper tubular lugs...13 Expanded copper tubular terminals for crimping on core and insulation...14 Copper butt connectors...15 Non insulated silver brazed terminals...16 Aluminium terminal ends, deep indent crimping...18 Aluminium-copper lugs, hexagonal compression type...19 Preinsulated ring terminals...20 Preinsulated fork terminals...21 Preinsulated end sleeves...22 Cable ties Polyamid cable ties...23 Earthing connections Compression Tap-off Copper Connectors Type C...24 Mechanical connectors...25 Brass Earthing Line Supports...26 Mass braids...27 Bolted Splices for Copper and Aluminium Cables...28 Insulation products Heat-shrink Tubing in BILBOX dispensers...29 Tooling Electro-hydraulic compression tool...30 Hydraulic crimping tools...31
4 Wind turbine, renewable power generation The wind turbine captures the wind s energy and converts it into electrical power. It comprises a nacelle and a tower. The nacelle houses both the rotor hub and the DC generator. Each of these parts integrates both low and medium voltage control systems, also high voltage components at the base of the tower. All of these components are within a confined area and subjected to a high level of stress. 1 2 TOOLS 4
5 Wind turbine connecting solutions 1 COPPER TERMINALS TUBULAR ALUMINIUM COPPER PREINSULATED LUGS LUGS TERMINALS 5 COPPER CONNECTOR POLYAMIDE CABLE TIES 2 6 HEAT-SHRINK TUBING 5
6 Base of the tower The base of the tower contains the control and command cabinets as well as voltage transformer connected to the main substation of the park. 1 TUBULAR LUGS 2 PREINSULATED TERMINALS C TYPE COPPER CONNECTORS 4 POLYAMIDE CABLE TIES COPPER BUTT CONNECTORS 7 DOUBLE CRIMP LUGS 6 EARTHING COPPER TUBULAR LUGS 8 DOUBLE CRIMP LUGS 9 ALUMINIUM LUGS 10 BRASS EARTHING LINE SUPPORTS MECHANICAL CONNECTORS 12 MASS BRAIDS TOOLS
7 Wind turbine connecting solutions COPPER TUBULAR LUGS FROM 6 TO 95 mm 2 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE25-8). Conductor size (mm 2 ) Item code Part number Packing Stud size (mm) W Øi Øe C1 C2 a L DE 6-4 SV DE 6-5 SV DE 6-6 SV DE 6-8 SV DE 10-5 SV DE 10-6 SV DE 10-8 SV DE SV DE 16-5 SV DE 16-6 SV DE 16-8 SV DE SV DE 25-5 SV DE 25-6 SV DE 25-8 SV DE SV DE SV DE 35-6 SV DE 35-8 SV DE SV DE SV DE SV DE 50-6 SV DE 50-8 SV DE SV DE SV DE SV DE 70-8 SV DE SV DE SV DE SV DE SV DE 95-8 SV DE SV DE SV DE SV DE SV Type of dies...r6...r10...r16...r25...r35...r50...r70...r95 7
8 COPPER TUBULAR LUGS FROM 120 TO 240 mm 2 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE120-8). Conductor size (mm 2 ) Item code Part number Packing Stud size (mm) W Øi Øe C1 C2 a L DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV DE SV Type of dies...r120...r150...r185...r240...r300...r400 8
9 Wind turbine connecting solutions COPPER TUBULAR LUGS FROM 6 TO 50 mm 2 BENT AT 90 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE6-5-90E). Conductor size (mm 2 ) Item code Part number Stud size Packing (mm) W Øi Øe C1 C2 a DE6-5SV90E 100 M DE6-6SV90E 100 M DE6-8SV90E 100 M DE6-10SV90E 100 M DE6-12SV90E 100 M DE10-5SV90E 100 M DE10-6SV90E 100 M DE10-8SV90E 100 M DE10-10SV90E 100 M DE10-12SV90E 100 M DE16-5SV90E 100 M DE16-6SV90E 100 M DE16-8SV90E 100 M DE16-10SV90E 100 M DE16-12SV90E 100 M DE25-5SV90E 100 M DE25-6SV90E 100 M DE25-8SV90E 100 M DE25-10SV90E 100 M DE25-12SV90E 100 M DE25-14SV90E 100 M DE35-6SV90E 100 M DE35-8SV90E 100 M DE35-10SV90E 100 M DE35-12SV90E 100 M DE35-14SV90E 100 M DE35-16SV90E 100 M DE50-6SV90E 100 M DE50-8SV90E 100 M DE50-10SV90E 100 M DE50-12SV90E 100 M DE50-14SV90E 100 M DE50-16SV90E 100 M DE50-20SV90E 100 M Type of dies...r10...r10...r16...r25...r35...r50 9
10 COPPER TUBULAR LUGS FROM 70 TO 240 mm 2 BENT AT 90 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE6-5-90E). Conductor size (mm 2 ) Item code Part number Stud size Packing (mm) W Øi Øe C1 C2 a DE70-6SV90E 50 M DE70-8SV90E 50 M DE70-10SV90E 50 M DE70-12SV90E 50 M DE70-14SV90E 50 M DE70-16SV90E 50 M DE70-20SV90E 50 M DE95-8SV90E 50 M DE95-10SV90E 50 M DE95-12SV90E 50 M DE95-14SV90E 50 M DE95-16SV90E 50 M DE95-20SV90E 50 M DE120-8SV90E 50 M DE120-10SV90E 100 M DE120-12SV90E 100 M DE120-14SV90E 100 M DE120-16SV90E 50 M DE120-20SV90E 50 M DE150-10SV90E 50 M DE150-12SV90E 50 M DE185-12SV90E 10 M DE185-20SV90E 10 M DE240-10SV90E 20 M DE240-12SV90E 20 M DE240-16SV90E 50 M Type of dies...r70...r95...r120...r150...r185...r240 10
11 Wind turbine connecting solutions COPPER TUBULAR LUGS FROM 6 TO 35 mm 2 BENT AT 45 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE6-5-45E). Conductor size (mm 2 ) Item code Part number Stud size Packing (mm) W Øi Øe C1 C2 a DE6-5SV45E 100 M DE6-6SV45E 100 M DE6-8SV45E 100 M DE6-10SV45E 100 M DE6-12SV45E 100 M DE10-5SV45E 100 M DE10-6SV45E 100 M DE10-8SV45E 100 M DE10-10SV45E 100 M DE10-12SV45E 100 M DE16-5SV45E 100 M DE16-6SV45E 100 M DE16-8SV45E 100 M DE16-10SV45E 100 M DE16-12SV45E 100 M DE25-5SV45E 100 M DE25-6SV45E 100 M DE25-8SV45E 100 M DE25-10SV45E 100 M DE25-12SV45E 50 M DE25-14SV45E 50 M DE35-6SV45E 100 M DE35-8SV45E 100 M DE35-10SV45E 100 M DE35-12SV45E 100 M DE35-14SV45E 50 M Type of dies R6 R10 R16 R25 R35 11
12 COPPER TUBULAR LUGS FROM 50 TO 185 mm 2 BENT AT 45 Compliant with DIN-EN Electric copper (EN 13600). Other treatments upon request. Funnel entry. For lugs with inspection hole, remove SV from part number (eg. DE6-5-45E). Conductor Stud size Type Item code Part number Packing size (mm 2 ) (mm) W Øi Øe C1 C2 a of dies DE50-6SV45E 100 M DE50-8SV45E 100 M DE50-10SV45E 100 M DE50-12SV45E 100 M R DE50-14SV45E 25 M DE50-16SV45E 100 M DE70-6SV45E 50 M DE70-8SV45E 50 M DE70-10SV45E 50 M DE70-12SV45E 50 M R DE70-14SV45E 50 M DE70-16v45E 100 M DE70-20SV45E 100 M DE95-8SV45E 50 M DE95-10SV45E 50 M DE95-12SV45E 50 M DE95-14SV45E 25 M R DE95-16SV45E 50 M DE95-20SV45E 50 M DE120-8SV45E 50 M DE120-10SV45E 50 M DE120-12SV45E 50 M DE120-14SV45E 25 M R DE120-16SV45E 50 M DE120-20SV45E 50 M DE150-10SV45E 50 M R DE185-12SV45E 50 M DE185-16SV45E 25 M R185 12
13 Wind turbine connecting solutions COPPER CONNECTORS FOR ANNEALED WIRE Compliant with NF C General features. Material : tin plated copper. Funnel entry (bell entry for 150 mm2). Annealed wire has to be soldered over flat termination. Cable has to be crimped in tubular termination. Suited to wall lead-through. Øi L1 L ØD L2 ep Conductor size (mm 2 ) Item code Part number Packing Øi L1 L2 L D EP Type of dies PL10MJ HCU PL25MJ HCU PL35MJ HCU PL50MJ HCU PL70MJ HCU PL95MJ HCU PL120MJ HCU PL150MJCT HCU150 TWO HOLE NEMA SPACING COPPER TUBULAR LUGS a Compliant with NF C Electrolytic tin-plating process. Other plating on request. Funnel entry. Øi C2 L 44.5 C1 Øe W Conductor size (mm 2 ) Item code Part number Packing W Ø i Ø e C1 C2 a L Type of dies C HCU C HCU C HCU C HCU CPC HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU C HCU630 13
14 EXPANDED COPPER TUBULAR TERMINALS FOR CRIMPING ON CORE AND INSULATION Electrolytic copper (EN 13600). Electrolytic tin-plating process. Bell entry. "B" Crimping on core. Hexagonal crimping on insulation. Application: - Flexible Cu cables and highly flexible strand. - Earthing and short circuiting, equipotentiality. Nominal section (mm 2 ) Item code Part number Packing Stud size (mm) Ød1 ØD 0/+0.2 p L a bb1 Tooling EC1270 HC120 SC120 EC1270KCM Conductor crimping Insulation crimping TRSE TRSE C12TRSE16BS C12TRSE16FH TRSE TRSE TRSE C12TRSE25BS C12TRSE25FH TRSE TRSE TRSE C12TRSE35BS C12TRSE35FH TRSE TRSE TRSE C12TRSE50BS C12TRSE50FH TRSE TRSE C12TRSE70BS C12TRSE70FH TRSE TRSE C12TRSE95BS C12TRSE95FH TRSE TRSE C12TRSE120BS C12TRSE120FH TRSE C12TRSE150BS C12TRSE150FH 14
15 Wind turbine connecting solutions COPPER BUTT CONNECTORS Compliant with DIN-EN Electrolytic copper (EN 13600). Electrolytic tin-plating process. Funnel entry. Nominal Type Item code Part number Packing section (mm 2 ) Øi Øe L of dies DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R DEM R
16 NON INSULATED SILVER BRAZED TERMINALS FROM 0.5 TO 25 mm 2 Compliant with DIN Electrolytic tin-plating process. Nominal section (mm 2 ) Item code Part number Packing Stud size (mm) W F Øi BY1M32D BY1M37D BY1M43D BY1M53D , BY1M65D BY25M32D BY25M37D BY25M43D BY25M53D , BY25M65D BY25M84D BY6M43D BY6M53D BY6M65D BY6M84D BY6M105D BY BY BY BY BY BY BY BY BY BY BY BY BY BY Type of dies MB 524 MB 524 MB 526..DMB 10..DMB 16..DMB 25 16
17 Wind turbine connecting solutions NON INSULATED SILVER BRAZED TERMINALS FROM 35 TO 240 mm 2 Compliant with DIN Electrolytic tin-plating process. Nominal section (mm 2 ) Item code Part number Packing Stud size (mm) W F Øi BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY BY Type of dies..dmb 35..DMB 50 C6DMB70 C6DMB95 C6DMB120 On request On request On request 17
18 ALUMINIUM TERMINAL ENDS, DEEP INDENT CRIMPING Compliant with NF C Massive aluminium terminal ends for the connection of aluminium cables on aluminium device terminals. The aluminium barrel, closed by a protection cap, is covered inside with neutral grease for a better electrical contact. Crimping by deep indent. Tongue from C0 A 25 to C5 A 400 Tongue from C6 A 500 to C8 A 1300 Nominal Packing 3 pieces Type of dies section (mm 2 ) Item code Part number ØA ØE C ØB L Dies Indents C0 A x MC 0E 0E C0 A x MC 0E 0E C1 A x MC 1E 1E C1 A x MC 1E 1E C1 A x MC 1E 1E C2 A x MC 2E 2E C2 A x MC 2E 2E C4 A x MC 4E 4E C4 A x MC 4E 4E C5 A x MC 5E 5E C5 A x MC 5E 5E C6 A x 80 6 Ø MC 6E 6E C6 A x 80 6 Ø MC 6E 6E C7 A x 80 6 Ø MC 7E 7E C7 A x 80 6 Ø MC 7E 7E C8 A x 80 6 Ø MC 8E 8E C8 A x 80 6 Ø MC 8E 8E 18
19 Wind turbine connecting solutions ALUMINIUM-COPPER LUGS, HEXAGONAL COMPRESSION TYPE Compliant with NF C Class B Application on industrial networks. Friction welded aluminium-copperlugs. Aluminium barrel is covered inside with contact grease. Crimping by hexagonal compression. L Range with ring tongue terminals øc E *** MTR ***** ICAU *** øe P øb øa Nominal Type Item code Part number section (mm 2 ) ØA ØE ØC ØB L P of dies ICAU E ICAU E ICAU E ICAU E ICAU E ICAU E ICAU E ICAU E ICAU X 260 L Range with narrow tongue terminals C E *** MTR ***** ICAU *** øe P øb øa Nominal section (mm 2 ) Item code Part number ØA ØE ØC ØB L P ICAUC150M ICAUC150M ICAUC185M ICAUC185M ICAUC240M ICAUC240M ICAUC300M ICAUC300M Type of dies..e E 235..E 235..X
20 PREINSULATED RING TERMINALS Compliant with DIN Tin-plated copper. Grooves in the barrel improve the contact with the cable strands and provide a better tensile strength. 6.6 Polyamide insulating sleeve. Easy entry conical entry. Max. operating temperature: +105 C. Flammability rating: UL 94V2. E Øi W Nominal section (mm 2 ) Packing 3 pieces Insulation Stud size Item code Part number Ø max (mm) (mm) W Øi E BE1M27D BE1M32D BE1M37D BE1M43D BE1M53D BE1M65D BE1M BE1M BE25M32D BE25M37D BE25M43D BE25M53D BE25M65D BE25M84D BE25M105D BE6M43D BE6M53D BE6M65D BE6M84D BE6M105D
21 Wind turbine connecting solutions PREINSULATED FORK TERMINALS Compliant with DIN Tin-plated copper. Grooves in the barrel improve the contact with the cable strands and provide a better tensile strength. 6.6 Polyamide insulating sleeve. Easy entry conical entry. Max. operating temperature: +105 C. Flammability rating: UL 94V2. E Øi W Nominal section (mm 2 ) Packing 3 pieces Insulation Stud size Item code Part number Ø max (mm) (mm) W Øi E BE1FM32D BE1FM37D BE1FM43D BE1FM53D BE1FM65D BE25FM32D BE25FM37D BE25FM43D BE25FM53D BE25FM65D BE6FM43D BE6FM53D BE6FM65D BE6FM84D
22 PREINSULATED END SLEEVES Compliant with DIN 46228/4 Material: tin-plated copper. Polypropylene insulated sleeve. Max. operating temperature: 105 C. NF C Nominal NF C DIN 46228/4 DIN 46228/4 except colours section Packing (mm 2 ) Item code Part number Col. Item code Part number Col. Item code Part number Col. d1 d2 L1 L CE 002 D CE CE 003 D CE 003 W CE CE CE 005 W CE CE 007 D CE 007 W CE CE 0072 D CE 0072 W CE CE CE 010 W CE CE CE 0103 W CE CE CE 015 W CE CE CE 0152 W CE CE CE 0153 W CE CE 025 D CE 025 D CE CE 0252 D CE 0252 D CE CE 0253 D CE 0253 D CA CA 042 D CA 042 D CA CA 040 D CA 040 D CA CA 043 D CA 043 D CA CA 062 D CA 062 W CA CA 063 D CA 063 W CA CA 102 D CA 102 W CA CA 103 D CA 103 W CA CA 162 D CA 162 W CA CA 163 D CA 163 W CA CA 253 D CA 253 W CA CA 252 D CA 252 W CA CA CA 352 W CA CA CA 350 W CA CA CA 502 W
23 Wind turbine connecting solutions POLYAMIDE CABLE TIES Compliant with MIL-S-23190E Material: polyamide 6.6. Halogen free. Melting temperature: 255 C. Flammability rating: UL 94 V2. Limit oxygen index: 27%. Operating temperature: -40 C to +80 C. Assembling temperature: -10 C to +60 C. Regain of humidity (24 h): 1.3%. Resistance to external agents: bases, oils, hydrocarbons, chlorinated solvents. Limited resistance to acids. Non resistant to phenols. Black Packing 100 pieces / bag White Length (mm) Width (mm) Ø max bundle (mm) Tensile strength (DaN) Item code Part number Item code Part number CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A CCE CCE A
24 COMPRESSION TAP-OFF COPPER CONNECTORS TYPE C Crimping tap made of pure electrolytic copper with a C shape enabling joints and taps of Cu-Cu for overhead and grounding connections without cutting the main cable. Item code Copper Tin-plated copper Capacities Part number Cdt. Item code Part number Cdt. L H B Totals Mini Maxi Mini Maxi Mounting Type of dies C C 6 E A..HCU C C 10 E x A..HCU C C 16 E A+B 16 2x1.5..HCU C C E A..HCU C 25 PM C 25 PME A+B..HCU C C 25 E C C 35 E C C 50 E A A+B..HCU x A+B A+B..HCU x A+B A 63 2x A A..HCU C C E A..HCU C C 70 E A..HCU C C 75 E A+B A+B CC C C E A..CC C C 95 E A..CC C C 120 E A..CC A C C 150 E A+B..CC C C E A+B..CC C C 185 E A+B..CC A+B C C 240 E A..CC C C E A.. 24
25 Wind turbine connecting solutions MECHANICAL CONNECTORS Mechanical brass connectors are normally fitted with 60 kg zinc plated U bolts. For bronze U bolts please suffix the PN with the letter "B". 1BR series - Ring tongue lugs Nominal Number of Item code Part number Packing section (mm 2 ) U bolts Ø B L Ø d BR (11) BR921B (11) BR ( ) BR1125B ( ) BR (15) BR1430B (15) BR (15) BR1632B (15) BR (15) BR1836B (15) BR (15-17) BR2240B (15-17) Mechanical brass connectors are normally fitted with 60 Kg zinc-plated U bolts. For bronze U bolts please suffix the PN with the letter «B». CTR series - Branch tongue lugs Nominal Number of Item code Part number Packing section (mm 2 ) U bolts Ø B Ø d CTR (9)* CTR10B (9)* CTR CTR16B * Non-drilled palm as standard. 25
26 BRASS EARTHING LINE SUPPORTS SF series: Brass earthing line supports. SF + BM series: Brass earthing line supports. Brass stud and nut and 2 Al-Cu washers. SF series Item code Part number Packing Item code Part number Packing A B ØC SF M 6 4 to SF M 6 8 to SF x to SF x to SF M 8 4 to SF M 8 8 to SF M 6 4 to SF M 10 8 to SF x to SF M 6 10 to SF M 8 4 to SF x to SF M 10 4 to SF M 8 10 to SF M 6 6 to SF M to SF x to SF M SF M 8 6 to SF x SF M 10 6 to SF M SF M 6 6 to SF M SF x to SF x SF M 8 6 to SF M SF M 10 6 to SF M SF + BM series Item code Part number Packing Item code Part number Packing A B ØC SF 66 + BM M 6 4 to SF BM x to SF 86 + BM M 6 4 to SF BM M 6 10 to SF BM M 6 6 to SF BM x to SF BM M 6 6 to SF BM M SF BM x to SF BM 5 36 M SF BM 5 26 M 6 8 to SF BM x
27 Wind turbine connecting solutions MASS BRAIDS Cu ETP copper wire. Sleeved and flattened ends aid a positive connection. Available plain or tin-plated. Plain copper Tin-plated copper Conductor size Ø wires Item code Part number Item code Part number mm² L A B C S D TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE TMP TMPE BOLTED SPLICES FOR COPPER AND ALUMINIUM CABLES Body: tin-plated aluminium alloy. Steel bolts. Inspection hole in the middle of the connector body. H 2 hexagon socket threads. Inspection hole Transversal serrations Application L.V. (0.6-1 kv) joints for copper and aluminium cables*. Industrial applications. * In dry atmosphere. Ø e L Ø i Part number Item code Part number rm sm re se Ø i Ø e L H MT06-25TN M MT10-70TN M MT16-95TN M12 27
28 EARTHING COPPER TUBULAR LUGS TIN-PLATED FORGED COPPER LUGS Copper tubular lugs. Electrolytic tin-plating process. Nominal Packing 50 pieces / box Hole section (mm 2 ) Item code Part number (mm) W L Type of dies CDCT CDCT HCT CDCT CDCT HCT CDCT CDCT CDCT HCT CDCT CDCT CDCT CDCT HCT CDCT CDCT P CDCT CDCT HCT CDCT CDCT E 215 STRAIGHT JOINT Standard packing in cardboard box: Mould. Separators. Resin to be cast. Sealing ribbon. Installation instructions. Without connector. Application: energy. telephony. D ØK L Packing x1 Capacity (mm2) Item code Part number L D K BJ x BJ x BJ x BJ x BJ x95 28
29 Wind turbine connecting solutions HEAT-SHRINK TUBING IN BILBOX DISPENSERS The mini-reel BILBOX offers a range of heatshrink tubing with inside diameters before shrinking of 4.8 to 25.4 mm (3/16" to 1"). Continuous operating temperature: - 55 C to C. Shrink ratio: 2/1 (except CPX201: 3/1). Minimum shrink temperature: 90 C. Flexible. Flame retardant. Resistance to common solvents and fluids. 4 colours: black. red. blue. yellow/green. Brown and grey colours upon request. Item code Part number Ø before shrinking (mm) (inch) Ø after shrinking (mm) Col Length in meters B8CPX BK 4.8 3/16" B6CPX BK 6.4 1/4" B5CPX BK 9.5 3/8" B5CPX BK /2" B4CPX BK /4" B3CPX BK " B8CPX RD 4.8 3/16" B6CPX RD 6.4 1/4" B5CPX RD 9.5 3/8" B5CPX RD /2" B4CPX RD /4" B3CPX RD " B8CPX BE 4.8 3/16" B6CPX BE 6.4 1/4" B5CPX BE 9.5 3/8" B5CPX BE /2" B4CPX BE /4" B3CPX BE " B6CPX /16" B4.5CPX /4" B4CPX /8" B3.5CPX /2" B3CPX /4" B2CPX "
30 ELECTRO-HYDRAULIC COMPRESSION TOOL 60 KN Cordless electro-hydraulic compression tool to crimp tubular and Al/Cu lugs and butt connectors Item code Part number Electro-hydraulic compression tool ensures a perfect compression type. Two stage hydraulic pump (fast advance ram, saving time). Motor cut out and automatic ram return when crimping is complete. Dimensions: 360 x 325 x 95 mm. Weight: Kg with battery EDC 620 KCM USB interface to trace the tool usage history. Battery charge and service indicator lights. 120 KN Cordless electro-hydraulic compression tool to crimp tubular and Al/Cu lugs and butt connectors Item code Part number Electro-hydraulic compression tool ensures a perfect compression type. Two stage hydraulic pump (fast advance ram, saving time). Motor cut out and automatic ram return when crimping is complete. Dimensions: 425 x 320 x 95 mm. Weight: Kg with battery EC 1270 KCM 30
31 Wind turbine connecting solutions HYDRAULIC CRIMPING TOOLS 200 kn connectable hydraulic compression heads for the crimping of copper tubular lugs, splices and connectors Item code Part number Hydraulic compression heads connectable on hydraulic pumps 700 bars. Length: 260 mm. Weight: kg SU 210 K SU 210 E SU 210 X Hydraulic pump 700 bars Item code Part number Crimping and rounding with 60 to 250 kn compression heads. Length: 700 mm. Weight: kg. Fitted with a 3 m hydraulic hose SPM 4095 K! This documentation does not form an agreement. Items represented are proposed while stock lasts. Mecatraction S.A. reserves the right to discontinue a product or modify specifications without prior notice. Non-contractual pictures Mecatraction S.A. All rights of reproduction (in full or part), adaptation and translation reserved for any country. Graphiq design : ComST 08/2014 Photo copyright : nico - Refocus Photography - zentilia - Pixel & Creátion - Fotolia.com 31
32 Distributed by: ComST 2014 B.P POMPADOUR CEDEX - FRANCE Phone: +33 (0) Fax: +33 (0) sales@mecatraction.com
Photovoltaic. range. Insulation products. connections
Photovoltaic range Connecting Earthing connections Insulation products Cable ties Tooling Photovoltaic For compliant and long term installations Photovoltaic systems must be assembled in compliance with
Connecting Solutions
Connecting Solutions A young dynamic company Founded in 1981, MCATRACTION quickly grew both in the domestic market and export markets. e are based in Pompadour, France, in premises of more than 8100 m
Industrial connections. Chain industrial connectors. Renewable energy. Earthing. Insulation products. Cable ties and accessories
Industrial connections Chain industrial connectors Renewable energy Earthing Insulation products Cable ties and accessories Tooling and accessories SICAME GROUP Connecting Solutions A young dynamic company
Power cable accessories catalogue
Power cable accessories catalogue Cable Lugs and Connectors Renewables A brighter future Jointing Tech is a specialist electrical distributor supplying a full range of power cable and accessories into
Engineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
Power cable accessories catalogue
Power cable accessories catalogue Cable Lugs and Connectors Renewables A brighter future Jointing Tech is a specialist electrical distributor supplying a full range of power cable and accessories into
Electrical connection systems
1 Electrical connection systems Copper tubular cable lugs and connectors 10 Tubular cable lugs 10 Tubular cable lugs for switchgear connections 16 Angle tubular cable lugs 17 Connectors 21 Insulated tubular
PREINSULATED COPPER TERMINALS
PREINSULATED COPPER TERMINALS : Connector material: electrolitic tinned copper (purity grade 99,9%) Insulation: polypropylene According to the norms: Humidity absorption: DIN 46228/4 - DIN 47002 for the
TERMINAL CLASSIFICATION OF PRODUCTS GENERAL INFORMATION
CLASSIFICATION OF PRODUCTS VINYL(PVC) or NYLON INSULATED TERMINALS WITH INSULATION GRIP SLEEVE (Funnel & Non-Funnel Entry types) This 3-piece design terminal provides a permanently attached tin plated
CONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
CONNECTORS AND FITTINGS
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. Human photo.
HYDRAULIC CRIMPING TOOL HT51
1 HYDRAULIC CRIMPING TOOL HT51 general features This two speed lightweight and compact, hydraulic tool is ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can
Around the cable. Socket sleeves.... convincing solutions
Around the cable Socket sleeves... convincing solutions Socket sleeves (male and female) Socket sleeves (female) with cable stop bare brass not insulated, to DIN 46247/part 1-3 and similar Art. no. CSS
18V CORDLESS HYDRAULIC CRIMPING TOOL B500
1 18V CORDLESS HYDRAULIC CRIMPING TOOL B500 The next generation of Cembre cordless hydraulic tools represents a significantly advantageous evolution from current models. Born of the renowned B51 type crimping
C A B L E C O N N E C T O R S
Quality in connection! Elematic Cabling Systems offers a large and complete range of crimping terminals, lugs and terminal blocks to satisfy the most different connection requirements in the widest application
power cable accessories
power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten
A-M COPPER TUBE CRIMPING LUGS. for copper conductors. A-M series lugs are manufactured
A-M COPPER TUBE CRIMPING LUGS for copper conductors A-M series lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity
web:
web: CONTENTS INTRODUCTION 00 CU LUGS 00 TERMINALS 00 HEAT SHRINKABLES 00 CABLE TIES 00 CABLE MARKERS 00 GLANDS 00 CLEATS 00 PVC TAPES 00 INTRODUCTION Aftec Electrical Solutions Aftec international with
Chapter 1. Connectors & Fittings for Railways
Chapter Connectors & Fittings for Railways Current Carrying Catenary Dropper Component N Messenger Bz Cable length from L Component N 3 Component N 2 Contact Wire SNCF approved This dropper provides a
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
VP RP BP GP HALOGEN FREE INSULATED TERMINALS. P range funnel entry OPERATING TEMPERATURE UP TO 115 C
VP RP P GP HAOGEN FREE INSUATED TERMINAS P range funnel entry OPERATING TEMPERATURE UP TO 115 C The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability
September Cable termination solutions Lugs and tools for reliable crimping
September 2016 Cable termination solutions Lugs and tools for reliable crimping ABB products are part of your success Designed to perform 1 2 3 4 5 7 6 7 8 1 Rail and transportation 2 Power utility and
TABLE OF CONTENTS FOREWORD...3 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS REQUIREMENTS...
TITLE SPECIFICATION FOR PORTABLE DATE: JULY 2006 PAGE: 1 OF 25 TABLE OF CONTENTS Page FOREWORD...3 INTRODUCTION...4 1 SCOPE...4 2 NORMATIVE S...4 3 DEFINITIONS AND ABBIATIONS...4 4 REQUIREMENTS...5 4.1
K Crimping dies HIS 13
Copper tubular cable lugs and connectors, standard design For connectors see assembly instructions for connector materials (general Insulated tubular cable lugs and connectors H 0/25 H 0/42 H 0 U E 0/25-L
HALOGEN FREE INSULATED TERMINALS OPERATING TEMPERATURE UP TO 115 C. Cond. Size sqmm (AWG) Quantity Box/Bag 0,2 0,5 (24 20) 0,25 1,5 (22 16)
VP RP BP GP HAOGEN FREE INSUATED TERMINAS P range funnel entry OPERATING TEMPERATURE UP TO 115 C File no. E125401 The P range of terminals has been designed, to meet the increasing demands for improved
Viking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
STRATO-THERM Terminals and Splices for High Temperature Applications
atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes
K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22
2 K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22 EKM 60 UNV + UA22 EK 60 UNV + UA22 THK 22 PK 22 PK 60 UNV + UA22 Crimping dies R 22 Crimping die set, 6-240 ² R 22 in plastic case, 10-pce. Tubular cable
HALOGEN FREE INSULATED TERMINALS P PP
1 HALOGEN FREE INSULATED TERMINALS P PP blade terminals The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability of electrical connectors. The Polycarbonate
Products Catalogue Cable Lugs, Crimping Tools & Bus Bar
Products Catalogue 2012 Cable Lugs, Crimping Tools & Bus Bar Railway series Lugs W/O Inspection Hole S b Ød 2 c 1 c 2 3D70-10 a Ød 1 Ød 3 J 3D Cat No. REF : I.C.F. d1 a b d2 d3 C1 C2 K J s 17 5 3D 5042
Sta-Kon s Long Barrel Design
Terminals Why Sta-Kon Terminals Are Better Like any other value added manufacturing process, using the best material is only a start. Our Sta- Kon terminals are all manufactured with the customer in mind,
Transformer bushings, type GOA 250. Installation and maintenance guide
Transformer bushings, type GOA 250 Installation and maintenance guide This document must not be copied without our written permission, and the contents thereof must not be imparted to a third party nor
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
Quality Products, Prompt Service, Trustful Relationships.
SINCE 1989 Quality Products, Prompt Service, Trustful Relationships. KM Industrial Corporation has established itself as a trusted supplier of Electrical, Machinery and Industry Goods for the last 20 years.
Nexans Power Accessories. Bolted connectors
Nexans Power Accessories Bolted connectors 1 Summary 1. The function of bolted connectors The function Physical parameters Crimped versus bolted connectors Advantages of bolted connectors 2. Presentation
3 Terminals, Kits and Tools
3 Terminals, Kits and Tools Glossary of Product Terminology 2 Terminals 5 Butt onnectors 5 Disconnects 11 Female 11 Male 17 Multi-Stack 22 Ring Tongue Terminals 23 For more than 30 years, 3M has been a
REMA BATTERY CONNECTOR DIN 80
Productfeatures and advantages Specifically designed for the quick and opportunity charging of large battery capacities Suitable for lead gel accumulators and lithium-ion batteries Corresponds to the DIN
1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
TECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Industrial electrical connections
Preinsulated ring terminals Tin-plated copper (silver-plating, gilding or nickel-plating on request). Barrel with funnel entry. Grooves in the barrel for a better tensile strength. Polyamide insulation.
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
CATALOG. Sta-Kon Power, connection & control Wire termination & insulation
CTLOG Sta-Kon Power, connection & control Wire termination & insulation Thomas & etts is now Installation Products, but our long legacy of quality products and innovation remains the same. From connectors
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
GENERAL CATALOGUE. Certified Quality. Management System. Certified Enviromental. Management System
Certified Quality Management System Certified Enviromental Management System Certified Occupational Health & Safety Management System GENERAL CATALOGUE QUALITY POLICY AND OBJECTIVES This catalogue illustrates
G R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide
1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Unimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
Power & Control Cable IEC
(2-, 3-, and 4-cores) U 0 PVC-Insulation, Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14).
General information. General information
Some importants points regarding crimping 2 Standards for crimped connections 3 Instructions for operation and safety 4 Service and maintenance 6 Inspection/certification agreement regarding crimp tools
REMA BATTERY CONNECTOR DIN 160
Productfeatures and advantages Specifically designed for the quick and opportunity charging of large battery capacities Suitable for lead gel accumulators and lithium-ion batteries Corresponds to the DIN
20 HUBER+SUHNER RADOX SOLAR
All our cables fully comply with the European directives 76/769/EWG, 2003/11/EG, 2000/53/EG, 2003/53/EG and 2002/95/EG (RoHS) and the requirements of REACH Nr. EC1907/2006. 20 RADOX SOLAR cables RADOX
H e a t s h r i n k P r o d u c t G u i d e
P o w e r P r o d u c t s H e a t s h r i n k P r o d u c t G u i d e Introduction HellermannTyton is a world leader in providing systems and solutions for heatshrink applications. HellermannTyton utilises
Power & Control Cable IEC
(2-, 3-, 4,- and 5-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Cable connection technology
Around the cable Cable connection technology Insulated crimp terminals... convincing solutions The Quality The elimination of every need to weld complicated operations to effect an electrical connection,
Powerline. Single Power Connectors. Ten 47 Limited
Powerline Single Power Connectors Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44 (0)1592 651049 Email: sales@ten47.com www.ten47.com Introduction
Power & Control Cable IEC
(2-, 3-, and 4-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
Pre-insulated terminals mm²
Pre-insulated terminals 0.1-6 ² 1 General information 2 Ring terminals 0.1-6 ² 3 Fork terminals 0.1-6 ² 4 Flanged fork terminals 0.5-2.5 ² 4 Hook terminals 0.5-2.5 ² 4 Pin terminals 0.1-6 ² 5 Blade terminals
Terminal Products and Tools
Terminal Products and Tools Terminals Overview...2-5 Nylon Insulated Ring...6-10 Vinyl Insulated Ring...11-12, 18 Non-Insulated Ring...13-15 Heavy Duty Ring...16 High Temperature Non-Insulated...17 TEFZEL
CONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
600/1000V XLPE Insulated PVC Sheathed Power Cables (Multicore)
600/1000V XLPE Insulated PVC Sheathed Power Cables (Multicore) FGD400 1RV-R (CU/XLPE/PVC 600/1000V Class 2) Outdoor Cabling Earth Conductor Earth Conductor APPLICATION The cables are mainly used in power
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
PRODUCT CATALOG Electrical components and enclosure accessories. Get familiar with Ouneva products online:
PRODUCT CATAOG 2017 Electrical components and enclosure accessories Get familiar with Ouneva products online: www.ounevaproducts.fi Ouneva Group Ouneva Group is a 40 years old family company. Ouneva Group
Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Materials
Type series booklet 7165.1/11-10 NORI 40 Maintenance-free shut-off globe valves with bellows with two-piece stem Type ZXLB Type ZXSB Our bellows seal valves meet the requirements of the TA-Luft (German
MECHANICAL SHEAR-BOLT CONNECTORS A Best Fit Solution for Jointing Cable Conductors
MECHANICAL SHEAR-BOLT CONNECTORS A Best Fit Solution for Jointing Cable Conductors INTRODUCTION Cable accessories have many decades of outstanding performance around the world. The technology for jointing
FR-3S Fire Resistant Cables
FR-3S Fire Resistant Cables APPLICATION This cable is suitable use in fire extinguishing systems to operate sprinklers, control panels, exit lights in high-rise buildings, hotels, hospitals, sub-ways and
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
URD Mini Pillar Installation Guide. UDS Universal Pillar Installation Guide. Cable to LV Isolators, Crossarm and Cable Detail
Part 5 LV Underground Drawing Register Number U8 U9 Description URD Mini Pillar Installation Guide UDS Universal Pillar Installation Guide U10-1 UDS Universal Pillar Double Link Unit Drilling Detail U10-2
PRODUCT INFORMATION ÖLFLEX HEAT 125 C MC. Info Improved characteristics in the event of a fire GL - Germanischer Lloyd approved
Electron beam cross-linked cables for more demanding application requirements - halogen free shielded control cable with GL certificate, special fire performance, IEC 60332-3, suitable for +125 C Info
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide
1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Boxes and Socket-outlets for tunnel applications
Boxes and Socket-outlets for tunnel applications Connectors for smoke extraction fans Boxes for emergency lighting (page 4) (page 5 to 7) Without cutting cable The leading range MARECHAL ELECTRIC is a
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
PRODUCT CATALOG Get familiar with Ouneva products online:
PRODUCT CATAOG Get familiar with Ouneva products online: www.ounevaproducts.fi Electrical components and enclosure accessories 2016 Ouneva Group Ouneva Group is a 40 years old family company. Ouneva Group
DuraSeal Heat-Shrinkable Environmentally Sealed, Nylon Insulated Crimp Terminals and Disconnects
Sealed, Nylon Insulated Crimp Terminals and Disconnects Product Facts Resistance to moisture and abrasion Strain relief Protection from wire pull-out Easy installation UL and CUL listed R Approvals and
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
Spring Cable Reels EXEL
Spring Cable Reels EXEL Conductix - Wampfler designs and manufactures high-performance electrification systems for mobile equipment used in heavy industries such as iron and steel, food processing, cement
C13 Various Cable Ties C
C13 Various Cable Ties PLIO -GRAINS cable ties PLIO -GRAINS S H PLIO-GRAINS Material: PA (polyamide 6) PP (polypropylene) Colours: natural - black natural Operating temperatures: -20 to +85 C -20 to +75
Battery powered crimping tool
www.klauke.com Battery powered crimping tool, Series New: E 0/-L by lauke Verbindungen mit System The Power of Partnership Für auswechselbare Einsätze der Serie 22, Schmalpressung Crimping and cutting
Power cable accessories catalogue
Power cable accessories catalogue Capability Your connection point Staying up to date with the latest network approval documents can be time consuming and complicated. That s why the Jointing Tech team
a Nexans company Medium voltage symmetrical separable connectors - Interface C -
a Nexans company Medium voltage symmetrical separable connectors - Interface C - Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised
Main catalogue. ESSAILEC Test Blocks
Main catalogue ESSAILEC Test Blocks Test Blocks ESSAILEC has been especially designed to fit the electricity Utilities requirements for safe and reliable testing. ESSAILEC allows the testing, without any
CO P P E R C A B LES A N D C O N N E C TO R S (P TY)
CCC Copper Cables & Connectors (Pty) Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air-Cooled Furnace Cables, Water-Cooled Resistance Welding
BORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals
Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods
Distribution Blocks & Bus-bar Solutions
Distribution Blocks & Bus-bar Solutions Insulated Multi Laminate Flexible Copper Bus-bars Threaded Copper Bus-bars Solid Copper Bus-bars Bus-bar Insulators & Supports Insulated Flexible Copper Braided
HYDRAULIC CRIMPING TOOL ,7. C sleeve Connectors. Purchase. separately HYDRAULIC PRESSHEAD ,6. C sleeve Connectors
HYDRAULIC CRIMPING TOOL HT 51 Crimping 50 380 130 2,7 C sleeve Connectors 120 120 70 HT 51-KV version also available for Power Supply Companies HYDRAULIC PRESSHEAD New design two speed hydraulic tool,
Completing the picture
HIGH VoltaGe cable accessories for 72 kv up to 170 kv Completing the picture based on experience is the future nkt cables GmbH nkt was established in 1891 as cable manufacturer. in 1999 nkt a/s denmark