TAE pole Contactors

Transcription

1 TAE pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges in accordance with the requirements of railway applications. They are also suitable for control from a battery supply. The complimentary technical information not included in these pages can be found in the Main Technical Catalogue for Contactors 1SBC0122C0201. TAE Coil voltages and codes: TAE Voltage - U c Code V d.c Other voltages: please consult us. Ordering Details: TAE... Rated operational Auxiliary contacts Type Order code Weight current fitted kg AC-3 AC-1 00 V θ < 0 C state coil voltage state coil voltage code Pack ing A A (see opposite table) (see opposite table) 1 piece 9 25 TAE SBL 1 61 R TAE SBL R TAE SBL R TAE SBL 2 61 R ! Voltage tolerances (-15 % and + %) included in the U c min. and U c max. values for the TAE... contactors. Replacement Coils For contactor Type Order code Weight kg state coil voltage state coil voltage code Pack ing (see opposite table) (see opposite table) 1 piece TAE9...TAE16 ZAE16 1SBN 15 1 R TAE26 ZAE0 1SBN 15 2 R /1 Low Voltage Products 1SBC01D0201

2 TAE Contactors Technical Data General Technical Data Rated insulation voltage U i according to IEC V 00 according to UL/CSA V 600 Rated impulse withstand voltage U imp. kv 8 Standards Devices comply with international standards IEC / and European standards EN / Certifications - Approvals see Technical Catalogue 1SBC0122C0201 Air temperature close to contactor "Conditions for use" page 1/, for control voltage limits and authorized mounting positions fitted with thermal O/L relay C -25 to +55 without thermal O/L relay C -0 to +55 for storage C -60 to +80 Climatic withstand acc. to IEC and UTE C 63-0 specification II Operating altitude m < 3000 Shock withstand acc. IEC and EN Mounting position 1 ( page 1/ ) A A B1 C1 C2 B2 E0202D1 1/2 sinusoidal shock for 11 ms: no change in contact position Shock direction Making position Breaking position A 20 g 20 g B1 g 5 g B2 15 g 15 g C1 20 g 20 g C2 20 g 20 g Magnet System Characteristics for TAE... Contactors Rated control circuit voltage U c V d.c Coil operating limits θ < 55 C Uc min.... U c max. Drop-out voltage in % of U c max % Coil consumption values for U c min.... U c max. pull-in value W holding value W Coil time constant open L/R ms 2 3 closed L/R ms 9 16 Operating time between coil energization and: N.O. contact closing ms N.C. contact opening ms between coil de-energization and N.O. contact opening ms (1) (1) N.C. contact closing ms (1) (1) (1) The use of surge suppressors increases the opening time on a scale of 1.1 to 1.5 for a varistor suppressor and on a scale of to 8 for a diode suppressor. 1/2 Low Voltage Products 1SBC01D0201

3 TAE Contactors Technical Data Main Pole - Utilization Characteristics Rated operational voltage U e max. V 6 Rated frequency limits Hz Conventional free-air thermal current I th acc. to IEC , open contactors θ 0 C A with conductor cross-sectional area mm 2 6 Rated operational current I e / AC-1 for air temperature close to contactor θ 0 C A U e max. 6 V θ 55 C A { θ 70 C (1) A with conductor cross-sectional area mm Utilization categorie AC-3 for air temperature close to contactor < 55 C Rated operational current I e AC V A phase motors V A V A M 3 M 3 0 V A V A V A V A Rated operational power AC V kw r.p.m. 50 Hz 1800 r.p.m. 60 Hz V kw phase motors 15 V kw V kw V kw V kw V kw Rated making capacity AC-3 according to IEC x I e AC-3 Rated breaking capacity AC-3 according to IEC x I e AC-3 Short-circuit protection for contactors without thermal O/L relay - Motor protection excluded U e < 500 V a.c. - gg type fuse A Rated short-time withstand current I cw at 0 C ambient temp., in free air, from a cold state 1 s A s A s A min A min A Maximum breaking capacity cos ϕ = 0.5 (cos ϕ = 0.35 for I e > 0 A) at 0 V A at 6 V A Heat dissipation per pole I e / AC-1 W I e / AC-3 W Max. electrical switching frequency for AC-1 cycles/h 600 for AC-3 cycles/h 600 for AC-2, AC- cycles/h 300 Electrical durability See A Contactor curves in Technical Catalogue 1SBC0122C0201 Mechanical durability millions of operating cycles 5 max. mechanical switching frequency cycles/h 3600 (1) Unauthorized for TAE... contactors. 1/3 Low Voltage Products 1SBC01D0201

4 TAE Contactors d.c. Operated with Double-Winding Coil Mounting Characteristics Mounting positions Mounting distances Shown below Fixing on DIN rail 35 x 7.5 mm according to IEC 715 and EN / EN x 15 mm by screws (not supplied) The contactors can be assembled side by side 2 x M Conditions for Use The contactor utilisation conditions relating to the Mounting position, Ambient temperature and Control voltage operating limits are summarized in the table below. Contactors Mounting position Ambient temperature Control voltage TAE 9... TAE 26 1,1 + 30, 2, 3,, 5 < 55 C U c min.... U c max.. Mounting Positions (see the above table for authorized positions) Position 2. Position Position 3 Position 5 Position 1 Position 1 ± 30 TAE9 to TAE26 accessory compatibility Contactor configuration Front-mounted accessories (1) Side-mounted accessories Main poles Available auxiliary contacts Contactor Auxiliary contact Auxiliary contact Pneumatic timer Auxiliary contact Interlock unit types 1-pole CA pole CA 5-.. (2) TP.. A 2-pole CAL 5-11 VM 5-.. or VE 5-.. TAE 9... TAE to x CA 5-.. or 1 x CA 5-.. (-pole) or 1 x TP.. A + 1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE x CAL / Low Voltage Products 1SBC01D0201

5 TAE Contactors Technical Data Connecting Characteristics Main terminals with cable clamp Connecting capacity (min.... max.) Main conductors (poles) } Rigid:solid ( mm 2 ) 1 x mm stranded ( 6 mm 2 ) 2 x mm Rigid with connector single for Cu cable mm 2 single for Al/Cu cable mm 2 double for Al/Cu cable mm 2 Flexible with cable end 1 x mm x mm Bars or lugs L mm 8 l L l mm > Auxiliary conductors (coil terminals) Rigid solid 1 x mm x mm Flexible with cable end 1 x mm x mm Lugs L mm 8 l L l mm > 3.7 L < 8 and l > 3.7 for coil terminal - L < and l >.2 for built-in auxiliary terminals. Degree of protection acc. to IEC / Protection against direct contact acc. to VDE 06 - Part. 0 EN and IEC / EN Main terminals IP 20 Coil terminals IP 20 Screw terminals Main terminals Coil terminals (delivered in open position, screws of unused terminals must be tightened) (+,-) pozidriv 2 screws M3.5 M M3.5 (+,-) pozidriv 2 screws with cable clamp Tightening torque Main pole terminals recommended Nm / lb.in 1.00 / / 15 max. Nm Coil terminals recommended Nm / lb.in 1.00 / 9 max. Nm 1.20 Terminal marking and positioning See Section 8 of Technical Catalogue 1SBC0122C0201. Same as all AE range. 1/5 Low Voltage Products 1SBC01D0201

6 TAE 9, TAE 12 and TAE 16 3-pole Contactors Dimensions (in mm) E1305D E1307D E1309D E1311D 7 E1313D 7 E1315D ø.5 (M) E1306D2 E1308D2 TAE 9, TAE 12, TAE 16 TAE 9, TAE 12, TAE 16 + CA 5 front-mounted 1-pole auxiliary contact block E13D2 E1312D2 TAE 9, TAE 12, TAE 16 TAE 9, TAE 12, TAE 16 + CAL 5 side-mounted 2-pole auxiliary contact block + CA 5 front-mounted -pole auxiliary contact block E131D2 3 E1316D2 TAE 9, TAE 12, TAE 16 TAE 9, TAE 12, TAE 16 + TP pneumatic timer + WB 75-A on-position latch.5.5 E01D TAE 9, TAE 12, TAE 16 Detailed dimension drawings available in DXF and PDF formats. 1/6 Low Voltage Products 1SBC01D0201

7 TAE 9, TAE 12 and TAE 16 3-pole Contactors Dimensions (in mm) 7 ø.5 (M) 7 3 E1317D E01D1 ø.5 (M) E1318D2 TAE 9, TAE 12, TAE 16 + VE 5-1 electrical and mechanical interlock unit E1319D E1320D E01D1 TAE 9, TAE 12, TAE 16 + VM 5-1 mechanical interlock unit 7 ø.5 (M) E01D E1321D * 6 E1322D TAE 9, TAE 12, TAE 16 + TA 25 DU thermal O/L relay * For TA 25 DU 32 only Detailed dimension drawings available in DXF and PDF formats. 9 1/7 Low Voltage Products 1SBC01D0201

8 TAE 26 3-pole Contactors Dimensions (in mm) E1323D E132D 5 E1325D E1326D TAE 26 TAE 26 + CA 5 front-mounted 1-pole auxiliary contact block E1327D E1328D 5 E1329D E1330D TAE 26 TAE 26 + CAL 5 side-mounted 2-pole auxiliary contact block + CA 5 front-mounted -pole auxiliary contact block E1331D E1332D 5 E1333D E133D TAE 26 TAE 26 + TP pneumatic timer + WB 75-A on-position latch 5 ø.2 (M) E0117D TAE 26 drilling plan Detailed dimension drawings available in DXF and PDF formats. 1/8 Low Voltage Products 1SBC01D0201

9 TAE 26 3-pole Contactors Dimensions (in mm) ø.2 (M) 123 E1335D E1336D E1337D E1338D E0126D TAE 26 + VE 5-1 electrical and mechanical interlock unit ø.2 (M) E0126D TAE 26 + VM 5-1 mechanical interlock unit 5 ø.2 (M) E0117D E1339D 15. TAE 26 + TA 25 DU thermal O/L relay 9. 1* 6 E130D * For TA 25 DU 32 only Detailed dimension drawings available in DXF and PDF formats. 1/9 Low Voltage Products 1SBC01D0201