Product brochure. ABB Fusegear EasyLine Fuse switch disconnector
|
|
|
- Melissa Stevens
- 6 years ago
- Views:
Transcription
1 Product brochure ABB Fusegear EasyLine Fuse switch disconnector
2 2 EasyLine Fuse Switch Disconnector ABB Fusegear
3 Content Fuse protection 4 Technical Data 5 General 6 Apparatus overview 7 Electronic Fuse Monitor (EFM) 12 Busbar adapters 13 Cable clamps and bolts 15 Ordering tables 17 Dimensional drawings 21 ABB Fusegear EasyLine Fuse Switch Disconnector 3
4 Fuse protection Easy and reliable The fuse is a superior short circuit protection element regarding the maximum allowed cut-off current (peak let through current) and energy value. This is more important the higher the voltage and prospective fault levels are. The SlimLine switch disconnector fuse fulfil the highest requirements for modern switch fuses with a total safety concept. The switch fuses are tested according to the EN standard with more stringent requirements for isolation, making, performance and safety.the fuse rails are tested according to IEC The melting curves and current limiting diagrams for NH fuse links are given in the IEC standard. The standardised fuse characteristics and high degree of current limitation ensure that there is a simple and effective co-ordination with fuse links and other devices. Fuse links provide a simple procedure for selecting the right fuse type for your installation, without complicated calculations or calculation tools. Fuses prevent blackouts. Only the fuse nearest a fault trips without upstream fuses (feeders or mins) being affected. Fuses thus provide selective coordination. When more power is needed in an installation, more feeders can be added without changing the present structure or any new selectivity calculations. Fuse links will assure selectivity in the installation by 1,6:1 difference in the rated current. Economical installation Lifetime costs of fuse systems are low. Fuse links which can withstand a high fault level and a fault current, are available at economical prices. After fuse operation, only the fuse link has to be changed. Because the fuse links can be rapidly and easilyreplaced, plant down time and maintenance are substantially reduced with a fuse link system. Because the fusing elements operate in a cylinder, they are not affected by their surroundings. Thus their protecting characteristics remain stable year after year. The dynamic stress on the network and its equip ment is dependent of the let through energy (i2t) at a short circuit. The fuse link provides the best protection compared to other solutions, at high short circuit currents. As the fuse link body is filled with quartz sand, there will be no emission of gases or arcs when a short circuit occurs. This again leads to less stress on the network and a higher degree of personal safety. Fuse protection - Easy and reliable - Economical installation - Easy and economical selectivity - No need for calculation tools - No need to change the present structure when power is needed - No moving parts - No extra operation time - No arc space - No emission of gasses at short circuits Reaction time Fuse i²t Breaker No moving parts - No extra operation time ,6:1 No need for calculation tools - Easy and economical selectivity 35A 50A 4 EasyLine Fuse Switch Disconnector ABB Fusegear
5 Technical Data EasyLine - Fuse Switch Disconnector 3 - pole Type XLP000 XLP00 XLP1 XLP2 XLP3 For NH fuse links acc. to IEC max width = 21mm Rated operational voltage Ue (V) Rated operational current Ie (A) Thermal current with fuse link Ith (A) Rated insulation voltage Ui (V) Rated impulse withstand voltage Uimp (kv) Fuse protected short circuit making (karms) Rated making and breaking capacity AC23B AC22B AC21B AC23B AC22B AC21B AC23B AC22B AC23B AC22B AC23B AC22B Rated frequency (Hz) Power loss at Ith without fuse link/per phase (W) 1,4W 3,5W 7,5W 13W 24W Electrical durability Mechanical durability Degree of protection from the front acc. to Open IP20 IP20 IP20 IP20 IP20 IEC60529 *) Closed IP30 IP30 IP30 IP30 IP pole Type SLP00 SLP-K1 SLP-K2 SLP-K3 For NH fuse links acc. to IEC Rated operational voltage Ue (V) Rated operational current Ie (A) Rated insulation voltage Ui (V) Rated impulse withstand voltage Uimp (kv) Fuse protected short circuit making (karms) Rated making and breaking capacity AC22B AC22B AC22B AC22B Rated frequency (Hz) Degree of protection from the front acc. Open IP20 IP20 IP20 IP20 to IEC60529 *) Closed IP30 IP30 IP30 IP30 The products are designed and tested in accordance with IEC / EN ABB Fusegear EasyLine Fuse Switch Disconnector 5
6 General Product presentation Properties of the EasyLine - XLP: Advantages of the EasyLine - XLP: Compact XLP000 Easy to install Typetested according to EN IEC Easy to snap on DIN rails Fullfills BGV A2 Easy to operate Easy to recycle / EN ISO standards Easy to understand Quick-make operation device Modern cable terminals Integrated IP 20 cable termination Modern and functional design IP 30 degree of protection from the front Additional arc protection shroud in front cover Replacement compatible to similar types in the market - increased personal safety Voltage measuring from the front Wide range of modern cable clamps and accessories V-0 plastic materials Electronice fuse monitoring (EFM) Wide range of busbar adapters to 40mm and 60mm 3 - pole: 4 - pole: XLP Amp SLP Amp XLP Amp SLP1 250 Amp XLP1 250 Amp SLP2 400 Amp XLP2 400 Amp SLP3 630 Amp XLP3 630 Amp 6 EasyLine Fuse Switch Disconnector ABB Fusegear
7 Apparatus overview XLP000 (3-pole) 100 A Compact design for NH 00 compact fuses up to 100 A (width = 21mm) Modern integrated cable clamps for 1,5-35 mm² cables Integrated cable shrouds IP 20 Snap on for DIN rail mounting (accessory) Front frames for 1-3 apparatus (accessory) Micro auxiliary switches, 1 or 2 pcs (accessory) Sealing facility Front frames for 1-3 apparatuses Sealing facility DIN rail mounting Voltage measurement Modern integrated cable clamps for 1,5-35 mm² cables ABB Fusegear EasyLine Fuse Switch Disconnector 7
8 Apparatus overview XLP00 (3-pole) 160 A Electronic fuse monitoring (EFM) Micro auxilliary switches, 1 or 2 pcs Auxilliary switches, 1 NO or 1 NC acc. to IEC Cable shrouds Wide range of cable terminal clamps (See page 14) Front frames for 1-3 apparatus Kit for double DIN rail mounting Adapter for 40 and 60 mm busbar distance. Padlocking facility Sealing facility Padlocking and Sealing facilities Electronic fuse monitoring showing detail for remote signaling Micro auxiliary switch on the sides. Auxiliary switch NO or NC in the front Cable shrouds 8 EasyLine Fuse Switch Disconnector ABB Fusegear
9 Apparatus overview XLP1 (3-pole) 250 A Electronic fuse monitoring (EFM) Micro auxiliary switches, 1 or 2 pcs Auxiliary switch, 1 NO or 1NC, acc. to IEC Cable shrouds Wide range of cable clamps (See page 14) Front frames for 1-2 apparatus Adapter for 40 and 60 mm busbar distance Padlocking facility Sealing facility XLP1 with adapter for 60 mm busbars XLP1 ABB Fusegear EasyLine Fuse Switch Disconnector 9
10 Apparatus overview XLP2/3 (3-pole) 400 / 630 A Electronic fuse monitoring (EFM) Micro auxiliary switches, 1 or 2 pcs Auxiliary switches, 1 NO or 1NC acc. to IEC Cable shrouds Wide range of cable clamps (See page 15) Adapter for 60 mm busbar distance Front frame for 1 apparatus Padlocking facility Sealing facility XLP2 XLP3 10 EasyLine Fuse Switch Disconnector ABB Fusegear
11 Apparatus overview SLP00/SLP-K 1/2/3 (4-pole) A The EasyLine range can offer a 4-pole solution by using SLP 4 pole. The Neutral pole can be equiped with a neutral link. The SLP 4-pole range : SLP 00 4-pole Delivered with 8 bridge clamps SLP-K 1,2,3 4-pole Delivered without clamps. Clamps have to be ordered separately SLP 00 4 pole SLP K1 4 pole ABB Fusegear EasyLine Fuse Switch Disconnector 11
12 Electronic Fuse Monitor (EFM) The fuse monitor is a fuse blown monitoring and indication device. It will be automatically reset after the blown fuse has been replaced and the green LED turns on again. The matrix below show all possible cases of indication Fuse status Relay contacts Green Red NO contact 13, 14 NC contact 11, Closed LED LED Open Closed Open Closed Fuses OK X X Fuses BLOWN X X 2. Open Fuses OK X X Fuses BLOWN X X Power supply to the EFM unit from phase L2 and L3 The fuse monitor is connected to the gripping lugs of the fuses. NOTE : Insulated gripping lugs can not be used. The fuse monitor requires that the supply side of the XLP should be on top of the switch. Technical data: Minimum operation voltage 400V -10% Maximum operation voltage 690V +10% Operational temperature range -25/+80 C Operating time < 2 sec. Power consumption < 3VA Uimp. over a blown fuse 12,3kV Uimp. between phases 9,8kV Uimp. between main circuit / relay contacts 9,8kV Dielectric test voltage input / output 3,5kV / 50Hz / 1 minute Electrostatic Discharge EN ± 4kV Electrical Fast Transient EN ± 2kV Conducted Fast Transient EN Vrms / 150kHz - 80MHz Recommended cable size AWG 22-12/0,2-2,5mm² EMC tested Yes Relay: Nominal current 8A Maximum switching voltage 240VAC, 24VDC 1SEB EasyLine Fuse Switch Disconnector ABB Fusegear
13 Busbar adapters - 60mm for XLP00, XLP1, XLP2 and XLP3 60mm busbar system Designed for 60 mm busbar distance XLP00 and XLP1 use busbar Cu/Al 5 or 10mm x 10-30mm. 3 pieces of distance shoes for 5 mm busbars are included with the adapter. For XLP2 and XLP3 use busbar Cu/Al 5-10mm x 10-30mm. The adapters are available for cable connection above (A) or cable connection below (B). The SF-60 Busbar system features Busbar width mm Busbar thickness 5 or 10 mm Centre distance between busbars 60 mm Cable connection supply module Electrical data 690V / 440A Cable connections Al/Cu mm² Dimension (W x H x D) 81 x 200 x 84 mm Distribution system for standard Busbars type SF-60 The busbar system type SF-60 is designed to take busbars of different cross sections, and it is type tested to VDE-0660, section 50 and IEC Explanations XLP00 A60/60 3M10 Below XLP = Basic Fuse Switch Disconnector Apparatus size Axx/yy = A: Adapter, xx: Busbardistance, yy: Depth mm 6BC = 6 pcs Bridge Clamps 3BC = 3 pcs Bridge Clamps 3TC = 3 pcs Tripple Clamps 3FC = 3 pcs Feeding Clamps 3M8 = 3 pcs Bolts M8 3M10 = 3 pcs Bolts M10 Above = Cable connection above Below = Cable connection below 1SEB ABB Fusegear EasyLine Fuse Switch Disconnector 13
14 Busbar adapters - 40mm for XLP00 and XLP1 40mm busbar system Cu 12 x 5mm or 12 x 10mm. Adapter 95 mm depth to busbars: A 40/95 40 mm Busbar system for Striebel & John switchboards Specially designed for the Striebel & John Busbar system 250A and 360A. Cu 12x5 or 12x10 mm. Adapter 75 mm depth to busbars, cable connection below: A 40/75 Adapter 120 mm depth to busbars, cable connection below: A 40/120 1SEB EasyLine Fuse Switch Disconnector ABB Fusegear
15 Cable clamps and bolts Type of clamp/bolt XLP000 Busbars height/width (mm) Conductor cross section min-max Conductor flexible (mm²) Rm/Sm (mm²) Re/Se (mm²) Torque (Nm) 1) Order code Cage clamp (CC) 1,5-25 1,5-35 1,5-35 3,2 Incl. in the switch XLP00 Bridge clamp (BC) 1,5-35 1,5-50 1,5-50 3,5 1SEP407733R0001 Triple clamp (TC) 1,0-10 1,0-10 1,0-10 3,5 1SEP407787R0001 Single prism clamp (SPC) 1,5-16 1,5-16 1, ,5 1SEP407732R0001 Feeding clamp (FC) for XLP00-6BC SEP407811R0001 Bolt M8x16 DIN933 4 x 20 Bolt M8x16 DIN933 Cable lug DIN46234 Bolt M8x16 DIN933 Cable lug DIN46235 XLP NHP R0006 Bridge clamp (BC) 10 x SEP407733R0002 Single prism clamp (SPC) ) SEP407732R0002 Double prism clamp (DPC) 2 x 70-2 x 95 2 x 70-2 x x 70-2 x NHP R0001 Bolt M10x20 DIN x 40 Bolt M10x20 DIN933 Cable lug DIN46234 Bolt M10x20 DIN933 Cable lug DIN NHP R0001 1) For correct Torque (Nm) values, pleasestudy the installation description delivered with the devices. 2) The Sm (sector shaped stranded) 150mm² have to be round formed before inserted in the Prism clamp. ABB Fusegear EasyLine Fuse Switch Disconnector 15
16 Cable clamps and bolts Conductor cross section min-max Type of clamp/bolt Busbars height/width (mm) Conductor flexible (mm²) Rm/Sm (mm²) Re/Se (mm²) Torque (Nm) 1) Order code XLP2/3 Bridge clamp (BC) 26 x (M8x25) 300 (M8x40) (M8x25) (M8x40) (M8x25) (M8x40) 14 1SEP407953R Single prism clamp (SPC) SEP407732R0002 Double prism clamp (DPC) 2 x 35-2 x x 35-2 x x 35-2 x 50 2 x 50-2 X SEP407956R0001 Bolt M12x30 DIN x 12 Bolt M12x30 DIN933 Cable lug DIN46234 Bolt M12x30 DIN933 Cable lug DIN NHP R0001 1) For correct Torque (Nm) values, pleasestudy the installation description delivered with the devices. Type tested according to standard: EN IEC and DIN VDE Explanations: Flexible: Multi stranded Re: Round solid Se: Sector shaped solid Rm: Round stranded Sm: Sector shaped stranded 16 EasyLine Fuse Switch Disconnector ABB Fusegear
17 Ordering tables Type Designation Item Description Order code Weight (Kg) XLP000 XLP000-6CC 100A, incl. 6 Cage Clamps 1SEP201428R0001 0,46 XLP000-6CC in carton 100A, incl. 6 Cage Clamps in carton 1SEP201428R0002 XUP000-6CC 100A, Fuse Base, incl. 6 Cage Clamps 1SEP201432R0001 0,34 XLP00 XLP00 160A without clamps or bolts 1SEP101890R0001 0,55 XLP00-6BC 160A, incl. 6 Bridge Clamps 1SEP101890R0002 0,63 XLP00-6BC-3M8 160A, incl. 6 Bridge Clamps and 3xM8 bolts 1SEP101890R0003 0,65 XLP00-6M8 160A, incl. 6xM8 bolts 1SEP101890R0004 0,63 XLP00-EFM-6BC XLP00-MNS adapter-3bc XLP00-MNS adapter-efm-3bc XLP00-A60/60-B-3BC-below XLP00-A60/60-B-below XLP00-A60/60-A-3BC-above XLP00-A40/95-B-3BC-below XLP00-A40/75-B-3BC-below XLP00-A40/75-B-3M8-below XLP00-A40/120-B-3BC-below XLP00-A40/120-B-3M8-below XLP00-A40/120-A-3BC-above XLP00-A40/120-A-3M8-above XLP1 160A, incl. Electronic Fuse Monitoring and 6 Bridge Clamps 1SEP101890R0012 0,68 160A, incl. MNS adapter and 3 Bridge Clamps 1SEP101890R0402 0,88 160A, incl. MNS adapter, EFM and 3 Bridge Clamps 1SEP101890R0412 1,1 160A, incl. A60/60 adapter and 3 Bridge Clamps, cable below 1SEP101916R0001 0,95 160A, incl. A60/60 adapter and cable below, without clamps or bolts 1SEP101916R0002 0,95 160A, incl. A60/60 adapter and 3 Bridge Clamps, cable above 1SEP101917R0001 0,95 160A, incl. A40/95 adapter and 3 Bridge Clamps, cable below 1SEP101889R0002 1,1 160A, incl. A40/75 adapter and 3 Bridge Clamps, cable below 1SEP101898R A, incl. A40/75 adapter and 3xM8 bolts, cable below 1SEP101898R A, incl. A40/120 adapter and 3 Bridge Clamps, cable below 1SEP101899R0002 1,2 160A, incl. A40/120 adapter and 3xM8 bolts, cable below 1SEP101899R0004 1,2 160A, incl. A40/120 adapter and 3 Bridge Clamps, cable above 1SEP101899R0102 1,2 160A, incl. A40/120 adapter and 3xM8 1SEP101899R0104 1,2 bolts, cable above XLP1 250A without clamps or bolts 1SEP101890R0001 1,6 XLP1-6BC 250A, incl. 6 Bridge Clamps 1SEP101890R0002 1,8 XLP1-6M10 250A, incl. 6 Bridge Clamps and 3xM10 bolts 1SEP101890R0004 1,8 XLP1-EFM-6BC 250A, incl. Electronic Fuse Monitoring and 6 Bridge Clamps 1SEP101890R0012 1,97 ABB Fusegear EasyLine Fuse Switch Disconnector 17
18 Ordering tables Weight Type Designation Item Description Order code (Kg) XLP1-A60/85-B-3BC-below XLP1-A60/85-A-3BC-above XLP1-A40/120-A-3BC-above XLP1-A40/120-A-3M10-above 250A, incl. A60/85 adapter and 3 Bridge Clamps, cable below 1SEP101918R0001 2,47 250A, incl. A60/85 adapter and 3 Bridge Clamps, cable above 1SEP101919R0001 2,47 250A, incl. A40/120 adapter and 3 Bridge Clamps, cable above 1SEP101912R0002 2,8 250A, incl. A40/120 adapter and 3xM10 bolts, cable above 1SEP101912R0004 2,75 XUP1 250A Fuse Base without clamps or bolts 1SEP101895R0001 1,1 XUP1-6BC 250A, Fuse Base incl. 6 Bridge Clamps 1SEP101895R0002 1,3 XLP2 XLP2 400A without clamps or bolts 1SEP101892R0001 2,5 XLP2-6BC 400A, incl. 6 Bridge Clamps 1SEP101892R0002 3,02 XLP2-EFM-6BC 400A, incl. Electronic Fuse Monitoring and 6 Bridge Clamps 1SEP101892R0012 3,2 XLP2-A60/120-A-above 400A, incl. A60/120 adapter, cable above without clamps or bolts 1SEP102285R0001 4,9 XLP2-A60/120-B-below 400A, incl. A60/120 adapter, cable below without clamps or bolts 1SEP102286R0001 4,9 XUP2 400A Fuse Base without clamps or bolts 1SEP101974R0001 XUP2-6BC 400A, Fuse Base incl. 6 Bridge Clamps 1SEP101974R0002 XLP3 XLP3 630A without clamps or bolts 1SEP101975R0001 3,7 XLP3-6BC 630A, incl. 6 Bridge Clamps 1SEP101975R0002 4,25 XLP3-EFM-6BC 630A, incl. Electronic Fuse Monitoring and 6 Bridge Clamps 1SEP101975R0012 4,4 XLP3-A60/120-A-above 630A, incl. A60/120 adapter, cable above without clamps or bolts 1SEP102287R0001 7,4 XLP3-A60/120-B-below 630A, incl. A60/120 adapter, cable below without clamps or bolts 1SEP102288R0001 7,4 SLP 4-pole SLP00 160A NHP R0001 1,2 SLP-K1 250A NHP R SLP-K2 400A NHP R0001 7,6 SLP-K3 right 630A with N-pole to the right NHP R0002 8,1 SLP-K3 left 630A with N-pole to the left NHP R0003 8,1 18 EasyLine Fuse Switch Disconnector ABB Fusegear
19 Ordering tables Type Designation Item Description Order code Weight (Kg) 1 5 Common accessories Micro auxiliary switch (not for XLP000) 1SEP407742R0001 0,01 6 Auxiliary switch NC 1SEP407742R0002 0,02 7 Auxiliary switch NO 1SEP407742R0003 0,02 8 Padlock device only for XLP (not SLP) 1SEP407786R0001 0, XLP00 / SLP00 Bolt ( 3-M8 ) w/ washer XLP1 / SLP1 Bolt ( 3-M10 ) w/ washer Kit including 3 x Bolts M8x16 mm with washer Kit including 3 x Bolts M10x20 mm with washer NHP R0006 0,04 NHP R0001 0,09 14 XLP2/3, SLP-K2/3 4-pole Bolt ( 3-M12 ) w/ washer Kit including 3 x Bolts M12x30 mm with washer NHP R0001 0, XLP1 / SLP-K 4 P Double Prisme Clamp ( 3-DPC ) 2 x mm² NHP R0002 0,15 XLP1 / SLP1 Front fixing bracket w/ frame NHP R0001 Accessories XLP000 XLP000 Front cover ( spare part ) 1SEP304222R0001 0,12 5 6,7 1 XLP000 Micro auxiliary switch 1SEP408738R0001 0,01 XLP000 DIN rail snap on kit - Qty. 1 pc 1SEP407740R0001 0,006 XLP000 DIN rail snap on kit - Qty. 10 pc 1SEP407740R0010 0,6 2 XLP000 Frontframe for 1 XLP000 1SEP407741R0001 0,02 3 XLP000 Frontframe for 2 XLP000 1SEP407741R0002 0,025 4 XLP000 Frontframe for 3 XLP000 1SEP407741R0003 0,03 Accessories XLP00 XLP00 Front cover ( spare part ) 1SEP101873R0001 0, XLP00 A60/60 Adapter above XLP00 A60/60 Adapter below For 60 mm busbar distance, 5 or 10 mm, cable above For 60 mm busbar distance, 5 or 10 mm, cable below 1SEP101910R0001 0,38 1SEP101915R0001 0, XLP00 A40/75 Adapter above/ below For 40 mm busbarsystem Striebel & John, cable above or below 1SEP101909R XLP00 A40/120 Adapter above/below For 40 mm busbarsystem Striebel & John, cable above or below 1SEP101909R0002 XLP00 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101873R0007 0, XLP00 Front fixing bracket with front frame 1SEP201534R0001 XLP00 Frontframe for 1 XLP00 1SEP407792R0001 0,02 XLP00 Frontframe for 2 XLP00 1SEP407792R0002 0,03 4 XLP00 Frontframe for 3 XLP00 1SEP407792R0003 0, XLP00 ABB-INS Frontframe for 1 XLP00 1SEP407792R0004 XLP00 ABB-INS Frontframe for 2 XLP00 1SEP407792R0005 XLP00 1,5mm distance plate f.s&j 1SEP408220R XLP00 Cable shroud 1SEP407793R0001 0, XLP00 Snap for double DIN rail 1SEP407897R0001 0,24 XLP00 Bridge Clamp ( 3-BC ) 1,5-50mm² 1SEP407733R0001 0,04 12 XLP00 Triple Clamp ( 3-TC ) 1,0-10mm² 1SEP407787R0001 0,15 11 XLP00 Single Pris.Clamp (3-SPC) 1,5-70mm² 1SEP407732R0001 0, XLP00 Feeding Clamp ( 3-FC ) mm² 1SEP407811R0001 0,29 ABB Fusegear EasyLine Fuse Switch Disconnector 19
20 Ordering tables Type Designation Item Description Order code Weight (Kg) Accessories XLP1 XLP1 Front cover ( spare part ) 1SEP101883R0001 0,5 2 3 XLP1 A60/85 Adapter above XLP1 A60/85 Adapter below For 60 mm busbar distance, 5 or 10 mm, cable above For 60 mm busbar distance, 5 or 10 mm, cable below 1SEP201451R0001 0,74 1SEP201456R0001 0,74 XLP1 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101883R0007 0, XLP1 Frontframe for 1 XLP1 1SEP407815R0001 0,04 XLP1 Frontframe for 2 XLP1 1SEP407815R0002 0,06 9 XLP1 Cable shroud 1SEP407815R0002 0, XLP1 Bridge Clamp ( 3-BC ) 16-95mm² 1SEP407733R0002 0,11 11 XLP1 Single Pris.Clamp ( 3- SPC ) mm² 1SEP407732R0002 0, Accessories XLP2/3 XLP2 Front cover ( spare part ) 1SEP101982R0001 0, XLP2 Frontframe for 1 XLP2 1SEP407951R0001 0,04 XLP2 Frontframe for 2 XLP2 1SEP407951R0002 0,06 16 XLP2 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101982R0007 0,25 XLP3 Front cover ( spare part ) 1SEP101984R0001 0,9 2 XLP3 Frontframe for 1 XLP3 1SEP407955R0001 0,055 XLP3 Front cover with EFM Front cover w/ Electronic fuse monitoring 1SEP101984R0007 0, XLP2/3 Cable shroud 1SEP407952R0001 0,18 XLP2/3 Bridge Clamp ( 3-BC ) mm² 1SEP407953R0001 0,26 XLP2/3 Sing.Prisme Clamp (3-SPC) mm² 1SEP407954R0001 0,5 16 XLP2/3 Double Pris. Clamp (3-DPC) 2 x mm² sm 1SEP407956R0001 0,36 Accessories SLP 4-pole SLP00 cover IP30 NHP P0001 0, SLP-K1 cover IP30 NHP P0001 0,06 SLP-K2/3 cover IP30 NHP P0001 0, SLP-K1 Single cable clamp mm² NHP R0002 0,1 SLP-K1 Single cable clamp mm² NHP R0002 0,1 20 SLP-K2/3 Single cable clamp mm² NHP R0002 0,24 21 SLP-K2/3 Single cable clamp Al/Cu mm² NHP R0002 0, SLP-K2/3 Double cable clamp Al/Cu 2 x mm² NHP R0002 0,3 SF-60 Busbar system Busbar carrier 3P 5-10 x 12-30mm GHV R0001 0,17 22 Cable connection supply module 5-10 x 12-30mm, mm² GHV R0034 0, EasyLine Fuse Switch Disconnector ABB Fusegear
21 Dimensional drawings XLP Basic Apparatus XLP000 A ,5 (2x) 50 19, ,5 25, A SECTION A-A XLP00 A 99, ,5 2 EFM 12, , ,5 186, , , A SECTION A-A XLP A EFM , , A SECTION A-A ABB Fusegear EasyLine Fuse Switch Disconnector 21
22 Dimensional drawings XLP Basic Apparatus XLP2 A , EFM XLP (x4) A A A SECTION A-A SECTION A-A 318, , EFM 1SEB SEB SEB EasyLine Fuse Switch Disconnector ABB Fusegear
23 Dimensional drawings XLP00 with Adapters XLP00 A40/75 XLP00 A40/95 XLP00 A40/120 XLP00 A60/ ( 103) SEB SEB SEB SEB ABB Fusegear EasyLine Fuse Switch Disconnector 23
24 Dimensional drawings XLP1 with Adapters XLP1 A60/ SEB ( 134 ) XLP1 A40/ EasyLine Fuse Switch Disconnector ABB Fusegear 1SEB
25 Dimensional drawings XLP2/3 with Adapters XLP2 A60/ (167) XLP3 A60/ ,0 7,9 205,8 (176) 122,5 53,3 60,0 111, ,6 249,0 204,8 (176) 348,7 106,3 60,0 XLP3 A60/120 Below 2,0 122,1 53,7 125,4 11,1 60,0 90, , XLP3 A60/120 Above ABB Fusegear EasyLine Fuse Switch Disconnector 25
26 Dimensional drawings Front Frames Front frame XLP000 Front frame XLP00 Front frame XLP1 4 1SEB Double 406 Single ,5 1SEB , ,5 62 Front frame XLP2 8,5 17, , ,5 1SEB SEB Front frame XLP3 2, ,5 5, ,5 21, ,5 4, ,75 1SEB SEB EasyLine Fuse Switch Disconnector ABB Fusegear
27 Dimensional drawings SLP 4-pole SLP00 4 pole SLP-K1 4 pole SLP-K2/3 4 pole NHP NHP NHP ABB Fusegear EasyLine Fuse Switch Disconnector 27
28 Contact us ABB AS Low Voltage Products P.O. Box 100, Sentrum N-3701 Skien, Norway Phone: Fax: A part of its on-going product improvement, ABB reserves the right to modify the characteristics or the products described in this brochure. The information given is not-contractual. For further details please contact the ABB company marketing these products in your country. Catalogue: 1SEC312011B0202, June 2011, Prod. ABB AS, Low Voltage Products, Norway
Catalogue March InLine II - ZLBM/ZHBM Fuse Switch Disconnector
Catalogue March 2015 InLine II - ZLBM/ZHBM Fuse Switch Disconnector 2 1SEC312022B0202 ABB Catalogue Contents Introduction 1 Apparatus 2 Accessories 3 Technical Data 4 Cable terminations and cable shrouds
CATALOG. EasyLine XLP Fuse Switch Disconnector poles
CATALOG EasyLine XLP Fuse Switch Disconnector 1-2-3-4 poles 2 E A S Y L I N E X L P F U S E S W I TC H D I S C O N N E C TO R 1-2 - 3-4 P O L E S Contents 004 005 Introduction EasyLine XLP 006 007 Introduction
Fuse switch disconnectors
Fuse switch disconnectors EasyLine Description A new generation designed for you Product presentation EasyLine is the new complete generation of fuse switch disconnectors including the following members:
Product brochure. ABB Fusegear SlimLine XR. Switch Disconnector Fuse, A
Product brochure ABB Fusegear SlimLine XR Switch Disconnector Fuse, 63-630A Fuse protection Fuse protection Easy and reliable The fuse is a superior short circuit protection element regarding the maximum
Protection and Connection. SlimLine XR Switch Disconnector Fuse A
Protection and Connection SlimLine XR Switch Disconnector Fuse 63-630 A Contents Introduction General Apparatus overview Accessories Technical Data Ordering tables Dimensional drawings 1 2 3 4 5 6 7 SlimLine
The Complete Range. Drawing of the NH Fuse-Switch, 3-pole switching, horizontal design for busbar supply on a 60 mm busbar systems
The Complete Range Easy mounting onto supporting rails Protection against accidental contact in the standart version Perforated versions for connections Drawing of the NH Fuse-Switch, 3-pole switching,
Horizontal fuse disconnects
THE NAME FOR SAFETY Horizontal fuse disconnects Horizontal fuse disconnects Horizontal fuse Disconnects are used in building installations, switchgear and controlgear as well as in power utility networks.
MULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
SlimLine XR. 3. generation of Switch Disconnector Fuse
SlimLine XR 3. generation of Switch Disconnector Fuse SlimLine XR fulfils increasing market requirements Fulfils increasing market requirements ABB has continuously invested in research and development,
ATyS S - ATyS d S Remotely operated Transfer Switching Equipment from 40 to 125 A
Transfer switches The solution for > Genset < 90 kva > Heating systems > Climate control > Ventilation systems > Telecommunications atys-s_018_a Strong points Function products are 4 pole remotely operated
FUSERBLOC Fuse combination switches with rear connection for industrial fuses up to 400 A
Fuse protection fuser_737_a_1_cat.eps fuser_738_a_1_cat.eps The solution for > Motor load break > Protection of industrial processes FUSERBLOC REAR / FRONT connections 3 x 250 A fuser_739_a_1_cat.eps Strong
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
3NP1 Fuse Switch Disconnectors up to 630 A
Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors
DPX Thermal magnetic and trip-free switches DPX 3 -I 160
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 6. CONFORMITY
MULTIBLOC 2.RST8 Size 2, 400A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 2.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 2.RST8 comprises NH fuse switch disconnectors for 400A. Products are designed in triple
PowerLine OS Switch Fuses A, 690V
Technical Brochure PowerLine OS Switch Fuses 20...160 A, 690V Brochure OS 10 GB 99-04 9902CD04 ABB Control New Switch Fuse Range 2 3 Total user safety Total user safety Fuse carriers fully IP20 protected
FUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
MULTIVERT 250A Size 1, 690VAC
MULTIVERT 250A IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors.
Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
MULTIBLOC 1.RST8 Size 1, 250A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 1.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 1.RST8 comprises NH fuse switch disconnectors for 250A. Products are designed in triple
vertical fuse switch disconnectors
SWITCHGEAR ARS vertical fuse switch disconnectors - touch protection IP 30 from the front - fibre glass extra strenghtened, self extinguishing thermoplastics - double clearance between open contacts -
Protection and Connection Motorized and automatic transfer switches IEC Technical guide
Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety
Fuse switch disconnectors
SWITCHGEAR 62 RBK pro Fuse switch disconnectors designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links. ENERGY SAFELY
SENTRON 3NP1 Fuse Switch Disconnectors up to 630 A
Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be
FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a_1_cat The solution for > Motor load break > Protection of industrial processes FUSERBLOC 63 to 125 A Strong points fuser_532_a_1_cat Function FUSERBLOC 32 to 4 A FUSERBLOC are
DRX 125 Circuit breaker (not adjustable)
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 272 20/21/22/23/24/25/26/27/55/56/57/58/59/60 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (continuation) 2 4.
MULTIVERT 1000A Main Incomer, 690VAC
IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors. They are designed
FUSERBLOC Fuse combination switches for industrial fuses up to 1250 A
Fuse protection fuser_548_a cat The solution for > Motor load break. > Protection of industrial cabinet. FUSERBLOC 6 to 25 A Strong points fuser_52_a cat Function FUSERBLOC 2 to 4 A FUSERBLOC are manually
DPX Thermal magnetic and trip-free switches DPX 3 -I 250
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 Reference(s) : 420 205/ 207/ 208/209/ 215/ 217/ 218/ 219/ 235/ 237/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3.
Fuse switch disconnectors
SWITCHGEAR RBK Fuse switch disconnectors intended for distribution of electricity and protection of electrical equipment against short-circuits and overloads, with industrial fuse links ENERGY SAFELY SWITCHED
COMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
PANEL PANEL MOUNTING COMPONENTS
PANEL PANEL MOUNTING COMPONENTS For conventional wiring, Wöhner offers a comprehensive range of panel components for fastening to a DIN rail or mounting plate. The fuses and associated connection technology
MULTIBLOC 1.ST8 Size 1, 250A, 690VAC, Design for Bottom Fitting, 1-,2-,3-,4-pole
MULTIBLOC 1.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 1.ST8 comprises NH fuse switch disconnectors for 250A. They are designed for bottom
Index. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
Short-circuit current limiter S800-SCL-SR
Short-circuit current limiter S800-SCL-SR 2 ABB Short-circuit current limiter S800-SCL-SR Self-resetting current limiting module S800-SCL-SR is ABB s innovative self-resetting current limiting module which
FUSERBLOC CD. The universal Fuse Combination Switch FROM 20 TO 1250 A. Industrial Switching & Protection Systems
FUSERBLOC CD The universal Fuse Combination Switch FROM 20 TO 1250 A SOCOMEC GROUP SWITCHING PROTECTION & UPS Industrial Switching & Protection Systems SWITCHING FUSERBLOC CD THE UNIVERSAL FUSE COMBINATION
Breakers and Switches. Switches Change-over and transfer switches
Breakers and Switches Switches Change-over and transfer switches Change-over and transfer switches 16...2500 A Contents: 4 Product overview, features 8 Technical data 8 Manual, motorized and automatic
DPX Magnetic only
87045 LIMOGES Cedex Phone :+33 5 55 06 87 87 Fax :+33 5 55 06 88 88 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. ELECTRICAL AND MECHANICAL CHARACTERISTICS 3 5. CONFORMITY
SWITCH FUSES 3KL71 from 32A to 800A Description
from 32A to 800A Description SWITCH FUSES 3KL71 3KL71 is a range of load-break switches suitable for making and breaking on load and disconnetting low voltage electrical circuits. They are commonly used
MANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
DPX Thermal magnetic and trip-free switches DPX 3 -I 630
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. ELECTRICAL AND MECHANICAL CHARACTERISTICS 2 6. CONFORMITY
MULTIBLOC 2.ST8 Size 2, 400A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 2.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 2.ST8 comprises NH fuse switch disconnectors for 400A. They are designed for bottom
Breakers and Switches. Switches Switch-disconnectors OT and OTM
Breakers and Switches Switches Switch-disconnectors OT and OTM Switch-disconnectors OT16...4000 and OTM40...2500 Features Product overview 4 High performance, compact solution 6 Technical data Switch-disconnectors,
NH Solid Blades 690 VAC sizes 000 to 3
NH Solid Blades 6 VAC sizes 000 to gs-class Protistor NH 6 VAC fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. This range is a
PROTECTION AND CONNECTION. ABB Compact ATS Compact without compromise
PROTECTION AND CONNECTION ABB Compact ATS Compact without compromise 2 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E ABB ARTICLE COMPACT OR CHAPTER ATS COMPACT TITLE WITHOUT COMPROMISE
01 Spectra Plus - Introduction
01 Spectra Plus - Introduction Standard features Conforming to IS13947-2/EN60947 2 Compact dimensions Available in 3P & 4P High performance microprocessor protection release Wide overload setting from
BETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
DCX-M. changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
DCX-M changeover switches ->CATALOGUE PAGES INSIDE THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES FOR COMMERCIAL BUILDINGS AND DCX-M In = 63 A Quality & design CONFORM TO EN/IEC
Control Circuit Protection
Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC
DRX 100 B/N/H Circuit breaker (not adjustable)
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (continuation) 2 4. MOUNTING 2 5. CABLING 3 6. ELECTRIC AND MECHANICAL
Non-fusible. Non-fusible disconnect switches 16A 3150A, 600VAC A, 1000VDC. International acceptance. Disconnect switches.
disconnect 16A 31A, 0VAC 200-0A, 1000VDC Disconnect Disconnect ABB SwitchLine includes 16 different amperage sizes from 16A to 31A. The basic construction provides flexibility, safety, and high performance
DRX 250 B/N/H Circuit breaker (not adjustable)
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 References rences: /18/19/20/21/22/23/24/25/26/27/28/29/ 32/33 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. MOUNTING 2 5.
Motorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
SFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
Varius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
Technical data. Busbar support 3 7, 5 6, 8 ETIBUSBAR 1 0, 5 BBS-60/4
Busbar support 20 30 BBS-/1 BBS-/3 57 52 29 29 1 5 3 0 1 5 10 2 0 5 3 7, 5 6 0 6 0 6 0 6, 8 12 1 0, 5 7 5 1 2 5 2 4 0 20 30 18 BBS-/4 563 98,5 10 29 93,5 5 29 18 75 180 10,5 6,8 30 30 25 20 52,5 12 BBS-/3-16
Fuse Switch Disconnectors XNH. Fuse Switch Disconnectors XNH... For fuse links NH000 to NH3. Rated operating current of 160, 250, 400 and 630A
www.eaton.eu Panel Building Accessories PIFT Plug In Fused Terminal Fuse Disconnectors Filters and Fans Fuse Switch Disconnectors XNH Thermostats Terminals Catalogue 2017 Electrical Cabinet Heating Fuse
One Source. Fuse monitoring for NH Fuse-Bases or Fuse-Rails
One Source Insulator Clamps for devices Fuse monitoring for NH Fuse-Bases or Fuse-Rails Solid links MM: Bild angeben Content NH Replacement Handles 192 NH Solid-Links 192 Fuse-Monitoring with strikers
SENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
B115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
Switch-disconnectors OT , OETL 3150
Switch-disconnectors OT 16...2500, OETL 3150 Contents 4 Product overview 6 Features 8 Technical data 18 Ordering information, manual operation 18 Front operated switch-disconnectors OT, OETL 24 Side operated
Vistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
Micro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
SD Series Non-Fused Load Switches
SD Series Non-Fused Load Switches The SD1 and SD2 series of non-fused load switches are listed as Manual Motor Controllers and are designed for use in local motor isolation. The SD series of modular load
DPX 1600 Electronic release
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 1600 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND
Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
Safety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
Fuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
DPX earth leakage DPX 3 -I earth leakage
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 + earth leakage Reference(s) : 420 225/ 227/ 228/229/ 255/ 257/ 258/ 259/ 285/ 287/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3.
Siemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
SIDERMAT Load break switches for power distribution from 250 to 1800 A with tripping function
The solution for Load break switches sdmat_066_a cat > Main switchboard > Distribution panel > Motor load break unction SIDERMT 4 x 630 External front operation SIDERMT are manually operated 3 or 4 pole
ATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
Phase + Neutral, neutral on right side
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34
ype UP T Busplugs Low Voltage Switchboard Equipment
Busplugs Type UP Low Voltage Switchboard Equipment Publication UP 2013 Since product improvement is a continuing policy, we reserve the right to change specifications without notice. Contents Descriptive
Fuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
Miniature circuit-breaker (MCB) SH200M Series
Miniature circuit-breaker (MCB) SH200M Series 25 mm² cage terminals, a well proven and reliable technology. IP20 - finger safety. Scratch and solvent resistant marking due to laser printing. Easy identification
MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN s
Basic Efficiency up to 1500 V 1-pole 3-pole SILAS MM: Bild angeben Content 690 V AC for baseplate, busbar and supporting rail mounting 60 Accessories 62 Technical Data see page 65 NU System The EFEN successfully
System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
Miniature Circuit Breaker
Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the
Selection Guide Motor Control Device Solutions
Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements
and other modular devices for low voltage installation
Technical catalogue System and other modular devices for low voltage installation 2CSC400002D0204 SUMMARY Introduction Miniature Circuit-Breakers Residual Current Devices Auxiliary elements and accessories
RX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
ATyS. 63 to 3200 A. Functions. Conformity to standards. General characteristics. Changeover switches. Functions
to 00 A Accessories Enclosed Characteristics M e atysm_007_a cat M s atysm_0_a cat products are and 4pole switches remotely controlled by volt free contacts ( ) or automatic transfer switches ( ). They
DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation
Solid State Relays, 3-phase
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays, 3-phase Zero-Point switching, heatsink integrated Main Characteristics: Three-phase controlled Zero switching LED display Various connection
Low Voltage Apparatus. Technical Brochure. FuseLine HRC Fuse Links OFAA, OFAM. Brochure OF 1 GB ABB Control Oy
Technical Brochure Low Voltage Apparatus FuseLine HRC Fuse Links OFAA, OFAM Brochure OF GB 96-03 ABB Control Oy 95MDN5447 HRC Fuse-Links OFAA and OFAM OFAA gg Fuse-Links for Overload and Short-Circuit
TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
IEC Low Voltage General Purpose Protection
, 6A, 0/400VAC (/440VAC) Complying with DIN VDE 0660 Part 07 EN / IEC 60947- DIN VDE 066 Part IEC 6069- DIN VDE 068 DIN VDE 4880 The D0-LINOCUR is a combination of switch-disconnector-fuse and NEOZED 6
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
LV switch-disconnectors. Interpact Merlin Gerin 40 to 2500 A. Catalogue. We do more with electricity
LV switch-disconnectors Catalogue Merlin Gerin 40 to 2500 A We do more with electricity LV switch-disconnectors The various low-voltage applications 2 from 40 to 2500 A 4 Compact from 80 to 1250 A 5 Masterpact
Gas Insulated Metal-clad Switchgear, HMGS!
Medium Voltage HMGS-G10 HYUNDAI Medium Voltage Gas Insulated Metal-clad Switchgear, HMGS! SF6 Gas Insulated Metal-clad Switchgear is an integrated assembly of vacuum circuit breaker, 3-position switch,