POWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
|
|
|
- Willa Gray
- 6 years ago
- Views:
Transcription
1 Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor per connector opening, contact Littelfuse Technical Service. Manufacturers of cable ter minations can furnish crimp-on sleeves for fine stranded conductors which permit these conductors to be used with box lugs. Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary power into secondary circuits. Lx2xxx-DIN series offers integral DIN-Rail mount and an optional hinged safety cover. Optional power distribution block covers provide protection against accidental shorting between poles caused by loose wires, tools, or other conductive material. They also protect personnel from accidentally contacting energized connectors. Applications Typical applications include heating, air conditioning and refrigeration systems, el e va tor systems, material handling equipment, control panels, motor controls, switchgear, and anywhere power needs to be distributed to more than one load. Ampere Ratings The ampere rating per pole for power distribution blocks is based on the line ampacity of 75 C insulated conductors per NEC Table If 60 C insulated conductors are used, load must not exceed the ampacity of 60 C conductors. Use of conductors rated in excess of 75 C is permitted (for example 90 C), however, load must not exceed the ampacity of 75 C conductors. Specifications Voltage Rating Current Rating SCCR Material Connector 600 V Based on NEC Table , using 75 C copper wire Consult Factory Phenolic rated at 150 C and Thermoplastic rated at 125 C (LD1400 and LS1300 series only) Aluminum: Highly con duc tive aluminum, tin plated Copper: Highly conductive copper, tin plated Flammability Rating UL94 V-0 Approvals UL Recognized - 0LD/0LS Series (File: E171395) LFD/LFS Series (File: E309688) CSA Certified - 0LD/0LS Series (File: LR700111) LFD/LFS Series (File: _0_000) UL Listed - 0LD57xxxx (File: E482231) Environmental Ordering Information See Selection Guide on next page Web Resources RoHS compliant, Lead (Pb) free For dimension, CAD and 3-D drawings, visit: Littelfuse.com/powrbloks Hinged Plastic Covers Clear Plastic Covers 1 of 7
2 Distribution Block Selection Guide AMP PER POLE POLES MATERI LINE CONNECTION LOAD CONNECTION FIGURE CATOG/ *PLASTIC COVER Slotted #2 - # in-lbs 4 Slotted #10 - #18 7 in-lbs 2 0LD14001Z Slotted #2 - # in-lbs 4 Slotted #10 - #18 7 in-lbs 2 0LD14002Z /32" Hex #2 - # in-lbs 4 5/64" Hex #10 - #18 7 in-lbs 2 LFD14003Z Slotted #2 - # in-lbs 4 Slotted #10 - #18 7 in-lbs 2 0LD14004Z - 1 5/16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 3 0LD25701Z LPBC /16" Hex 2/0 - # in-lbs 4 1/8" Hex #4 - #14 35 in-lbs 3 LFD25702Z LPBC /16" Hex 2/0 - # in-lbs 4 1/8" Hex #4 - #14 35 in-lbs 3 LFD25703Z LPBC23 1 3/16" Hex 2/0 - # in-lbs 4 1/8" Hex #4 - #14 35 in-lbs 4 0LD25701ZXDIN 0LCH1321Z /16" Hex 2/0 - # in-lbs 4 1/8" Hex #4 - #14 35 in-lbs 4 0LD25702ZXDIN 0LCH1322Z /16" Hex 2/0 - # in-lbs 4 1/8" Hex #4 - #14 35 in-lbs 4 0LD25703ZXDIN 0LCH1323Z 175 Adder 1 2/0 - # in-lbs 4 #4 - #14 35 in-lbs 4 0LD2570AZXDIN - 1 3/16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 3 0LD29701Z LPBC CU 1 3/16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 3 0LD29702Z LPBC /16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 3 0LD29703Z LPBC23 1 3/16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 4 0LD29701ZXDIN 0LCH1321Z /16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 4 0LD29702ZXDIN 0LCH1322Z CU /16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 4 0LD29703ZXDIN 0LCH1323Z 175 Adder 1 2/0 - # in-lbs 4 #4 - #14 35 in-lbs 4 0LD2970AZXDIN /16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 1 0LD04022Z LPBC /16" Hex 2/0 - # in-lbs 4 Slotted #4 - #14 35 in-lbs 1 0LD04023Z LPBC /16" Hex 2/0 - # in-lbs 6 Slotted #4 - #14 35 in-lbs 1 0LD04012Z LPBC /16" Hex 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 1 LFD04013Z LPBC03 1 5/16" Hex 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 4 0LD25801ZXDIN 0LCH1321Z /16" Hex 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 4 0LD25802ZXDIN 0LCH1322Z /16" Hex 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 4 0LD25803ZXDIN 0LCH1323Z 175 Adder 1 5/16" Hex 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 4 0LD2580AZXDIN /16" Hex 350kcmil - # in-lbs 2 3/16" Hex 2/0 - # in-lbs 9 0LD335543Z 0LCH1333Z /16" Hex 350kcmil - #6 275 in-lbs 6 Slotted #4 - #14 35 in-lbs 1 0LD04042Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 6 Slotted #4 - #14 35 in-lbs 1 0LD04043Z LPBC /16" Hex 400kcmil - #6 275 in-lbs 4 Slotted #2 - # in-lbs 5 0LD35521Z LPBC /16" Hex 400kcmil - #6 275 in-lbs 4 Slotted #2 - # in-lbs 5 0LD35522Z LPBC /8" Hex 500kcmil - #6 375 in-lbs 4 5/32" Hex #2 - # in-lbs 5 LFD35523Z LPBC /16" Hex 400kcmil - #6 275 in-lbs 6 Slotted #2 - # in-lbs 5 0LD35531Z LPBC /16" Hex 400kcmil - #6 275 in-lbs 6 Slotted #2 - # in-lbs 5 0LD35532Z LPBC /8" Hex 500kcmil - #6 375 in-lbs 6 5/32" Hex #2 - # in-lbs 5 LFD35533Z LPBC Slotted 400kcmil - #6 275 in-lbs 8 Slotted #2 - # in-lbs 6 0LD45601Z LPBC Slotted 400kcmil - #6 275 in-lbs 8 Slotted #2 - # in-lbs 6 0LD45602Z LPBC Slotted 400kcmil - #6 275 in-lbs 8 Slotted #2 - # in-lbs 6 0LD45603Z LPBC /16" Hex 2/0 - # in-lbs 6 Slotted #4 - #14 35 in-lbs 5 0LD35551Z LPBC /16" Hex 2/0 - # in-lbs 6 Slotted #4 - #14 35 in-lbs 5 0LD35552Z LPBC /16" Hex 2/0- # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 5 LFD35553Z LPBC Slotted 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 5 0LD39551Z LPBC CU 2 Slotted 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 5 0LD39552Z LPBC Slotted 2/0 - # in-lbs 6 1/8" Hex #4 - #14 35 in-lbs 5 0LD39553Z LPBC33 1 Slotted 500kcmil - #4 375 in-lbs 6 5/32" Hex #2 - # in-lbs 5 0LD39531Z LPBC CU 1 Slotted 500kcmil - #4 375 in-lbs 6 5/32" Hex #2 - # in-lbs 5 0LD39532Z LPBC Slotted 500kcmil - #4 375 in-lbs 6 5/32" Hex #2 - # in-lbs 5 0LD39533Z LPBC33 1 Slotted 500kcmil - #4 375 in-lbs 6 Slotted #2 - # in-lbs 6 0LD45511Z LPBC Slotted 500kcmil - #4 375 in-lbs 6 Slotted #2 - # in-lbs 6 0LD45512Z LPBC Slotted 500kcmil - #4 375 in-lbs 6 Slotted #2 - # in-lbs 6 0LD45513Z LPBC43 1 3/8" Hex 500kcmil - #4 375 in-lbs 6 5/16" Hex 2/0 - # in-lbs 7 0LD55791Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 6 5/16" Hex 2/0 - # in-lbs 7 0LD55792Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 6 3/16" Hex 2/0 - # in-lbs 7 LFD55793Z LPBC53 Note: = Aluminum / CU = Copper *Covers sold separately 2 of 7
3 Distribution Block Selection Guide AMP PER POLE POLES MATERI LINE CONNECTION LOAD CONNECTION FIGURE CATOG/ *PLASTIC COVER 1 3/8" Hex 500kcmil- #4 375 in-lbs 8 5/32" Hex #2 - # in-lbs 7 0LD55941Z LPBC /8" Hex 500kcmil- #4 375 in-lbs 8 5/32" Hex #2 - # in-lbs 7 0LD55942Z LPBC /8" Hex 500kcmil- #4 375 in-lbs 8 5/32" Hex #2 - # in-lbs 7 0LD55943Z LPBC53 1 Slotted 500kcmil - #4 375 in-lbs 12 Slotted #2 - # in-lbs 7 0LD55521Z LPBC Slotted 500kcmil - #4 375 in-lbs 12 Slotted #2 - # in-lbs 7 0LD55522Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 7 LFD55523Z LPBC /2" Hex 600kcmil- #2 375 in-lbs 3 3/16" Hex 1/0 - # in-lbs 6 5/32" Hex #2 - # in-lbs 9 0LD35881Z 0LCH1331Z /2" Hex 600kcmil- #2 375 in-lbs 3 3/16" Hex 1/0 - # in-lbs 6 5/32" Hex #2 - # in-lbs 9 0LD35883Z 0LCH1333Z /2" Hex 600kcmil- #2 375 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 9 0LD35951Z 0LCH1331Z /2" Hex 600kcmil- #2 375 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 9 0LD35952Z 0LCH1332Z /16" Hex 250kcmil - #6 275 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 9 0LD35961Z 0LCH1331Z /16" Hex 250kcmil - #6 275 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 9 0LD35962Z 0LCH1332Z /16" Hex 250kcmil - #6 275 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 9 0LD35963Z 0LCH1333Z 2 3/8" Hex 500kcmil - #6 375 in-lbs 8 5/16" Hex 2/0 - # in-lbs 7 0LD55861Z LPBC /8" Hex 500kcmil - #6 375 in-lbs 8 5/16" Hex 2/0 - # in-lbs 7 0LD55862Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 8 3/16" Hex 2/0 - # in-lbs 7 LFD55863Z LPBC53 2 3/8" Hex 500kcmil- #4 375 in-lbs 8 3/16" Hex # in-lbs 7 0LD59861Z LPBC CU 2 3/8" Hex 500kcmil- #4 375 in-lbs 8 3/16" Hex # in-lbs 7 0LD59862Z LPBC /8" Hex 500kcmil- #4 375 in-lbs 8 3/16" Hex # in-lbs 7 0LD59863Z LPBC53 2 3/8" Hex 500kcmil- #6 375 in-lbs 12 Slotted #4 - #14 35 in-lbs 7 0LD55921Z LPBC /8" Hex 500kcmil- #6 375 in-lbs 12 Slotted #4 - #14 35 in-lbs 7 0LD55922Z LPBC /8" Hex 500kcmil- #4 375 in-lbs 12 1/8" Hex #4 - #14 35 in-lbs 7 LFD55923Z LPBC53 2 3/8" Hex 500kcmil- #6 375 in-lbs 12 Slotted #2 - # in-lbs 7 0LD59921Z LPBC CU 2 3/8" Hex 500kcmil- #6 375 in-lbs 12 Slotted #2 - # in-lbs 7 0LD59922Z LPBC /8" Hex 500kcmil- #6 375 in-lbs 12 Slotted #2 - # in-lbs 7 0LD59923Z LPBC /2" Hex 500kcmil - #4 375 in-lbs 12 5/16" Hex #2 - # in-lbs 7 0LD54083Z LPBC /2" Hex 600kcmil- #2 375 in-lbs 4 5/16" Hex 3/0 - #6 120 in-lbs 4 5/16" Hex #4 - #14 35 in-lbs 7 0LD54113Z LPBC /16" Hex 750kcmil - 1/0 600 in-lbs 10 3/16" Hex 2/0 - # in-lbs 8 0LD57041Z 0LCH1351Z /16" Hex 750kcmil - 1/0 600 in-lbs 10 3/16" Hex 2/0 - # in-lbs 8 0LD57043Z 0LCH1351Z /16" Hex 750kcmil - 1/0 600 in-lbs /16" Hex 750kcmil - 1/0 600 in-lbs /16" Hex 750kcmil - 1/0 600 in-lbs /16" Hex 750kcmil - 1/0 600 in-lbs Note: = Aluminum / CU = Copper *Covers sold separately 3 5/16" Hex 250kcmil - #6 275 in-lbs 3 5/16" Hex 250kcmil - #6 275 in-lbs 4 1/4" Hex 3/0 - #6 180 in-lbs 4 1/4" Hex 3/0 - #6 180 in-lbs 8 0LD57051Z 0LCH1351Z 8 0LD57053Z 0LCH1351Z 8 0LD57071Z 0LCH1351Z 8 0LD57073Z 0LCH1351Z 3 of 7
4 Splicer Block Selection Guide AMP PER POLE POLES MATERI LINE CONNECTION LOAD CONNECTION FIGURE CATOG/ *PLASTIC COVER Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 2 0LS13001Z Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 2 0LS13002Z /32" Hex #2 - # in-lbs 1 5/32" Hex #2 - # in-lbs 2 LFS13003Z Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 2 0LS13004Z Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 3 0LS25521Z LPBC Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 3 0LS25522Z LPBC Slotted #2 - # in-lbs 1 Slotted #2 - # in-lbs 3 0LS25523Z LPBC /16" Hex 1/0 - # in-lbs 1 3/16" Hex 1/0 - # in-lbs 3 0LS21211Z LPBC CU 1 3/16" Hex 1/0 - # in-lbs 1 3/16" Hex 1/0 - # in-lbs 3 0LS21212Z LPBC /16" Hex 1/0 - # in-lbs 1 3/16" Hex 1/0 - # in-lbs 3 0LS21213Z LPBC23 1 5/16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 3 0LS25721Z LPBC /16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 3 0LS25722Z LPBC /16" Hex 2/0 - # in-lbs 1 3/16" Hex 2/0 - # in-lbs 3 LFS25723Z LPBC23 1 5/16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS25721ZXDIN 0LCH1321Z /16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS25722ZXDIN 0LCH1322Z /16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS25723ZXDIN 0LCH1323Z 175 Adder 1 2/0 - # in-lbs 1 2/0 - # in-lbs 4 0LS2572AZXDIN - 1 5/16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS29721ZXDIN 0LCH1321Z /16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS29722ZXDIN 0LCH1322Z CU /16" Hex 2/0 - # in-lbs 1 5/16" Hex 2/0 - # in-lbs 4 0LS29723ZXDIN 0LCH1323Z 175 Adder 1 2/0 - # in-lbs 1 2/0 - # in-lbs 4 0LS2972AZXDIN /16" Hex 250kcmil - #6 275 in-lbs 1 5/16" Hex 250kcmil - #6 275 in-lbs 5 0LS31231Z LPBC /16" Hex 250kcmil - #6 275 in-lbs 1 5/16" Hex 250kcmil - #6 275 in-lbs 5 0LS31232Z LPBC /16" Hex 250kcmil - #6 275 in-lbs 1 5/16" Hex 250kcmil - #6 275 in-lbs 5 0LS31233Z LPBC /8" Hex 250kcmil - #6 375 in-lbs 1 3/8" Hex 250kcmil - #6 375 in-lbs 5 0LS31241Z LPBC CU 1 3/8" Hex 250kcmil - #6 375 in-lbs 1 3/8" Hex 250kcmil - #6 375 in-lbs 5 0LS31242Z LPBC /8" Hex 250kcmil - #6 375 in-lbs 1 3/8" Hex 250kcmil - #6 375 in-lbs 5 0LS31243Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 1 5/16" Hex 350kcmil - #6 275 in-lbs 1 0LS03032Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 1 5/16" Hex 350kcmil - #6 275 in-lbs 1 0LS03033Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 1 5/16" Hex 350kcmil - #6 275 in-lbs 5 0LS31261Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 1 5/16" Hex 350kcmil - #6 275 in-lbs 5 0LS31262Z LPBC /16" Hex 350kcmil - #6 275 in-lbs 1 5/16" Hex 350kcmil - #6 275 in-lbs 5 0LS31263Z LPBC /16" Hex 2/0 - # in-lbs 2 5/16" Hex 2/0 - # in-lbs 9 0LS33053Z 0LCH1333Z /2" Hex 600kcmil - #4 500 in-lbs 1 1/2" Hex 600kcmil - #4 500 in-lbs 6 0LS45571Z LPBC /2" Hex 600kcmil - #4 500 in-lbs 1 1/2" Hex 600kcmil - #4 500 in-lbs 6 0LS45572Z LPBC /2" Hex 600kcmil - #4 500 in-lbs 1 1/2" Hex 600kcmil - #4 500 in-lbs 6 0LS45573Z LPBC /16" Hex 250kcmil - #6 275 in-lbs 2 5/16" Hex 250kcmil - #6 275 in-lbs 9 0LS33203Z 0LCH1333Z /16" Hex 350kcmil - #4 275 in-lbs 2 5/16" Hex 350kcmil - #4 275 in-lbs 7 0LS51291Z LPBC /16" Hex 350kcmil - #4 275 in-lbs 2 5/16" Hex 350kcmil - #4 275 in-lbs 7 0LS51292Z LPBC /16" Hex 350kcmil - #4 275 in-lbs 2 5/16" Hex 350kcmil - #4 275 in-lbs 7 0LS51293Z LPBC53 2 3/8" Hex 500kcmil - #4 375 in-lbs 2 3/8" Hex 500kcmil - #4 375 in-lbs 7 0LS53011Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 2 3/8" Hex 500kcmil - #4 375 in-lbs 7 0LS53012Z LPBC /8" Hex 500kcmil - #4 375 in-lbs 2 3/8" Hex 500kcmil - #4 375 in-lbs 7 0LS53013Z LPBC53 Note: = Aluminum / CU = Copper Note: *Covers sold separately 4 of 7
5 Distribution Block and Splicer Block Outline Drawings Dimensions Inches (mm) Figure 1 Figure 2 4-pole Figure 3 Figure 4 Adder 5 of 7
6 Distribution Block and Splicer Block Outline Drawings Dimensions Inches (mm) Figure 5 Figure 6 Figure 7 6 of 7
7 Distribution Block and Splicer Block Outline Drawings Dimensions Inches (mm) Figure 8 Figure 9 7 of 7
POWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one con ductor per connector opening
Voltage Rating Current Rating Material. Connector CATALOG/ ORDERING NUMBER CATALOG/ ORDERING NUMBER. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
Voltage Rating Current Rating Material. Connector. Catalog/ ordering number. Catalog/ ordering number. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
POWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
Blocks and Holders. Specifications. Voltage Rating 600 V Current Rating Based on NEC Table , using 75 C copper wire Material.
6Fuse Blocks and Holders Blocks and Holders Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed
Open-Style Power Distribution Blocks
I MPDB Series Open-Style Power Distribution Blocks The Next Generation Power Distribution Block (PDB) Ratings: Volts: 1000Vac/DC Amps: 65 to 2260A based on NEC table 310.15(B)(16) 75ºC ampacities Mersen
Open-Style Power Distribution Blocks
MPDB Series Open-Style Power Distribution Blocks Power distribution The Next Generation Power Distribution Block (PDB) Ratings: Volts: 000VAC/DC Amps: 65 to 2260A based on NEC table 30.5(B)(6) 75ºC ampacities
LFJ602003C 200A 600V Fus Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LFJ602003C 200A 600V Fus Block Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
I power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs...
Power Distribution Blocks I A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
SERIES POWER DISTRIBUTION BLOCKS
62000-69000 SERIES POWER DISTRIBUTION BLOCKS VERSATILE POWER DISTRIBUTION BLOCKS FOR CABLE TERMINATIONS Ferraz Shawmut Power Distribution Blocks afford a safe, convenient way of splicing cables, splitting
A powerful way to manage your power distribution challenges. I Power Distribution Blocks
I Power Distribution Blocks A powerful way to manage your power distribution challenges. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
Fuseblocks. Voltage Ratings: Ampere Ratings: Leakage Current: Catalog/system number Torque Range System Number
class T FuseBlocks NEW! Smaller Design Description The new Littelfuse Class T fuse blocks offer many advantages over previous generations that are noted in the features and benets section. Of particular
Power Distribution Blocks
ower istribution Blocks A OWERFUL WAY TO MANAGE YOUR OWER ISTRIBUTION CHALLENGES Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or the compatibility
Class T 300 & 600 Volt Fuse Blocks F B 300 & 600V CLASS T FUSE BLOCKS RATINGS: FEATURES/BENEFITS: RECOMMENDED FUSE USAGE: CLIP & CONNECTOR TYPES
Class T 300 & 600 Volt use locks USE LOCKS 300 & 600V CLASS T USE LOCKS RATINGS: Volts: 300VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 200A, 400A, 600A SCCR: 200kA Mersen Class T fuse blocks accommodate Class
Class H & K Fuse Holders - 250/600 Volt
Class H & K - 250/0 Volt Specifications: Approved for 10,000 Amp Withstand Rating and Short Circuit Current Ratings (SCCR) UL Listed File No. IZLT.E35113 CSA Certified File No. LR21455 RoHS Compliant &
Spring Reinforced. 30A & 60A Box. Spring. 30A Screw (R) Spring. 30A Screw. Spring Reinforced. 30A Pressure Plate
Class H, K & R USE LOCKS 250 & 600V CLASS H, K & R USE LOCKS RATINGS: Volts: 250VAC/DC, 600VAC/DC Amps: 30A, 60A, 00A, 0A, 400A, 600A SCCR: 0kA with class H fuses; 50kA with class K fuses; 0kA with class
R6F30A1S R6F30A1S 1P 60A 600V Fuse BLK. Features. Long Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Clip Type Fuse Current Rating Fuse Type
T CLASS T FUSE BLOCKS
Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut
Gears & Fuse Gears. American General Purpose Fuses Cylindrical & Blade Fuse Blocks Class H, K & R CLASS H, K AND R FUSE BLOCKS. Ratings.
Ratings Ferraz Shawmut Class H, K and R Fuse Blocks accommodate all Class H, K and R 250 and 600V power fuses. A choice of screw, pressure plate, box and special order stud connectors fit a wide range
Class R 250V and 600V modular ferrule and knifeblade fuse blocks
Technical Data 1048 Class R 2V and 600V modular ferrule and Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with up to four mounting holes per pole
Class J modular ferrule and knifeblade fuse blocks
Technical Data10488 SupersedesFebruary 2016 Class J modular ferrule and knifeblade fuse blocks Knifeblade fuse blocks from 100 to 600 amps feature phase barriers between poles for additional safety with
Power Distribution Blocks
Power Distribution Blocks One powerful way to manage your power distribution problems. Your problem: You re facing the enormously complex wiring requirements of an automated manufacturing facility. Or
LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block Littelfuse Catalog Number LH600303C Manufacturer Littelfuse Description
LF Series Class H/K5 and r Fuse blocks
LF Series lass H/K5 and r Fuse blocks 250 V 0 V Specifications Description The Littelfuse lass H/K5 and R blocks offer many benefits such as indication, snap-to-release DIN rail mounting and universal
Quick Connection Panel (QCP) Installation Guide
Quick Connection Panel (QCP) Installation Guide DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read this document first. The installer is responsible for compliance with National Electrical
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
A. This Section includes Low Voltage Switchgear Work, as indicated on the drawings, and as specified herein.
16425 SWITCHBOARD ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 24 13 An optional keynote to
BH-1 modular fuse blocks, 700 V, 400 A
Supersedes December 1998 Agency information UL Recognized, Guide IZLT2, File E14853 up to 700 V CSA Certified, Class 6225-01, File 47235 up to 700 V CE RoHS compliant Materials Base - light-weight, high
SOLAR PRODUCTS CATALOG
SOLAR PRODUCTS CATALOG 1500 Vdc Products In-Line Fuses Protection Relays Overvoltage Protection Technical Expertise and Manufacturing Excellence With over 16.5 million devices installed in photovoltaic
CON EDISON EQUIPMENT
CON EDISON EQUIPMENT Con Ed Navtech Size Volts Amps List Spec. Cat. No Description Price 205 N-205 10x10x5 100 $72.00 205 RTN-205 10x10x5 100 190.00 215 N-215 24x12x8 200 144.00 215 RTN-215 24x12x8 200
PRODUCT DRAWING WIRING DIAGRAM FIELD CONNECTIONS MILLENNIUM MODEL YT CHILLERS (STYLE J) WITH ELECTRO-MECHANICAL STARTER JOB DATA:
Supersedes: 160.55-PW4 (1199) FORM 160.55-PW4 (600) PRODUCT DRAWING YORK INTERNATIONAL CORPORATION P.O. Box 1592, YORK, PA 17405 CONTRACTOR ORDER NO. YORK CONTRACT NO. YORK ORDER NO. WIRING DIAGRAM FIELD
Complete and reliable solar circuit protection
Contents Photovoltaic fuses, holders, and blocks 6 Complete and reliable solar circuit protection Description Fuses Fuse size Volts Amps PVM 13/32" x 1-1/2" 600 4-30 PVS-R RK5 600 20-400 Section page PV-_A10_
Power Distribution Blocks
I Finger-Safe Power Distribution Blocks Power Distribution Blocks Safety evolving Ratings: Volts: 1,2,3 1500VAC/ DC; 4,5 600VAC/DC Amps: 175 to 840A SCCR: 600V or less, 100kA with proper fuse; Over 600V,
UL Recognized power distribution blocks
Susedes September 2016 example: 16220-3 is a 3-16220 Where: The prefix 16220 defines the block s lineside characteristics (i.e., one conductor that accepts 2/0 - #14 Cu, or 2/0 - #8 Al conductors) and
FIELD CONNECTIONS FOR YK CHILLER (STYLE G) OPTIVIEW CONTROL CENTER WITH REMOTE MEDIUM VOLTAGE SSS
Supersedes: 160.75-PW2 (508) Form 160.75-PW2 (311) FIELD CONNECTIONS FOR YK CHILLER (STYLE G) OPTIVIEW CONTROL CENTER WITH REMOTE MEDIUM VOLTAGE SSS WIRING DIAGRAM CONTRACTOR ORDER NO. YORK CONTRACT NO.
Terminal Blocks. Section 12. Control Catalog 12-1
CR151K Resilient Modular Terminal Blocks CR151C (top) and CR151A Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...12-2 Product Tables...12-3, 12-4 Accessories...12-3, 12-4 Technical
K Crimping dies HIS 13
Copper tubular cable lugs and connectors, standard design For connectors see assembly instructions for connector materials (general Insulated tubular cable lugs and connectors H 0/25 H 0/42 H 0 U E 0/25-L
CLASS J 600 Volt Fuse Blocks
CLASS J 600 Volt Fuse Blocks Mersen Class J fuse blocks accommodate all Class J fuses. A choice of screw, pressure plate, box and special order stud connectors it a wide range of stranded or solid copper
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
Studded Power Feed Thru Terminal Blocks
ST722 Series The Studded Power Feed Thru were designed for applications where power feed thru is necessary using standard double hole lugs with.625 spacing. These terminal blocks are available in three
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
Understanding National Electric Code (NEC) tap rules How do they apply to circuit breaker terminals?
White paper Understanding National Electric Code (NEC) tap rules How do they apply to circuit breaker terminals? Darryl Moser, Business Development Manager, DEM Sales, ABB, Electrification Products Division
POWER TERMINAL BLOCKS
Terminal Blocks and Wiring Systems Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Power Terminal Blocks POWER TERMINAL BLOCKS Introduction Standards Compliance High Fault
IN-LINE WATERTIGHT FUSE HOLDERS
IMPROVED Description Recently redesigned, the Littelfuse 600 V in-line watertight fuse holders allow maximum protection for high humidity and corrosive environments. The fuse holders are designed to be
PRODUCT SHEET. Elastimold advanced connection system (shear bolt)
PRODUCT SHEET Elastimold advanced connection system (shear bolt) 2 Elastimold cable accessories The Elastimold advanced connection system - shear bolt is the latest solution to be incorporated into the
Compact Circuit Protector (CCP)
Supersedes April 2014 UL Class CC, CF (CUBEFuse ), Midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-Pole Class CC, Midget, 10x38mm Description & Specifications....
CATENARY ACCESSORIES INSTRUCTIONS. Power Management. Quick Connect Voltage Separation Box AY-QCVSB. Sheet 5. Suspension Accessories
CATENARY ACCESSORIES INSTRUCTIONS Quick Connect Jumper Cord AY-QC7P6-X Sheet 2 Quick Connectors AY-QC7SET Sheet 3 3/32" Stainless Steel Cable AY-CBL3/32-50 Power Cord AY-P6-50 Power Cord Ties AY-WT-100
Bussmann series Quik-Spec Power Module Switch elevator disconnect
Supersedes January 2016 Agency information UL 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262 culus, NEMA 1, UL 50, Listed enclosure cul per Canadian Standards C22.2, No. 0-M91-CAN/
Bulletin 1497A Machine Tool Transformers
Bulletin A Overview/Catalog Number Explanation Bulletin A Bulletin A are designed to reduce supply voltages to control circuits. The complete line of transformers is available with optional factory-installed
Quik-Spec Coordination Panelboard Specifications
Quik-Spec Coordination Panelboard Specifications 30A - 400A Fusible Panelboards SECTION 26 24 XX (This Specification references CSI MasterFormat 2004) FUSIBLE BRANCH CIRCUIT PANELBOARDS PART 1 1.01 SUMMARY
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
Design Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
PRODUCT BROCHURE. Elastimold advanced connection system (shear bolt)
PRODUCT BROCHURE Elastimold advanced connection system (shear bolt) 2 ELASTIMOLD ADVANCED CONNECTION SYSTEM (SHEAR BOLT) Elastimold cable accessories The Elastimold advanced connection system shear bolt
HALOGEN FREE INSULATED TERMINALS P PP
1 HALOGEN FREE INSULATED TERMINALS P PP blade terminals The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability of electrical connectors. The Polycarbonate
table of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
MDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
Compact Circuit Protector (CCP)
Supersedes March 2016 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail 2011/65/EU Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description
Compact Circuit Protector (CCP) 1-, 2- and 3-pole Class CC, Midget, 10x38mm
Supersedes October 2015 BUSSMANN SERIES UL Class CC, CF (CUBEFuse ), midget and IEC 10x38mm DIN-Rail Contents Description Page Description Page 1-, 2- and 3-pole Class CC, Midget, 10x38mm Description and
Compact Circuit Protector
Supersedes February 2019 BUSSMANN SERIES Compact Circuit Protector (cat. no. CCP2) 2011/65/EU CCP2 switch up to 100 A 200 A CCP2 switch 400 A CCP2 switch Contents Page 30, 60 and 100 amp switches s and
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
HIGH-SPEED (SEMICONDUCTOR) FUSES CATALOG. POWR-SPEED Products
HIGH-SPEED (SEMICONDUCTOR) FUSES POWR-SPEED Products Littelfuse App! Download our free Littelfuse Catalogs and Literature App to keep our products and technical resources at your finger tips! A Broad Portfolio
PowerPact Circuit Breakers for Control Panel Disconnects Class 0611
Data Bulletin 0611DB0402 R04/16 05/2016 Replaces 0611DB0401 R11/11 PowerPact Circuit Breakers for Control Panel Disconnects Class 0611 Retain for future use. Introduction Certifications The electrical
Section Contents. Disconnect Switches
Section Contents Page Compact Circuit Protector (CCP) fused disconnect switches....................326-329 Fused, dead front disconnect switches...........329 Fusible Disconnect Switch Overview............330
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
FLQ4 4A 500V TD CT Midget Fuse. Descriptions 4A 500V TD CT MIDGET FUSE Time Delay Midget Fuse 4 Amp. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FLQ4 4A 500V TD CT Midget Fuse Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
Blocks and Holders. In-Line Watertight Fuseholders. Applications. Benefits. Features. Specifications. w w w. l i t t e l f u s e.
Littelfuse 600 volt in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single
HIGH-SPEED SEMICONDUCTOR FUSES CATALOG POWR-SPEED PRODUCTS HIGH-SPEED FUSES FUSE BLOCKS & HOLDERS
HIGH-SPEED SEMICONDUCTOR FUSES CATALOG POWR-SPEED PRODUCTS HIGH-SPEED FUSES FUSE BLOCKS & HOLDERS MICROSWITCHES FAST-ACTING FUSES NEW PSR Series High-Speed Square-Body Fuses Now available in case sizes
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
CONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
Approved Contractor Construction e-guide Residential Commercial
Approved Contractor Construction e-guide Residential Commercial Clark Public Utilities PO Box 8900 Vancouver, WA 98668 (PAGE 2) TABLE OF CONTENTS PAGE Trenching 3 Wire 8 Single-Phase Transformer Set 13
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
Compact Circuit Protector (CCP)
UL Class CC, Midget and IEC 10x38 fuses The revolutionary Cooper Bussmann CCP is 1/3 the footprint of a molded case circuit breaker. The level of protection provided by the CCP is up to three times the
BUSSMANN. CUBEFuse Compact Circuit Protector Base (CCPB) SERIES. Technical Data Effective April 2017 Supersedes April 2016
Supersedes April 2016 BUSSMANN SERIES CUBEFuse Compact Circuit Protector Base (CCPB) 2011/65/EU Features and benefits: Uses finger-safe, current-limiting Class CF CUBEFuse with Class J performance available,
CHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes August 2016 BUSSMANN SERIES Specifications: 2011/65/EU Volts 600 V (or less) UL 690 V (or less) IEC 1000 Vdc (or less) photovoltaic (PV) Amps 30 A UL 32 A IEC Short-Circuit Current Rating (SCCR)
fastfax Rock Solid TM Load Centers General Information
General Information FEATURES UL Listed. Straight-in wired, bolt-on main breaker for 100-225 amps. Neutral and ground bars have multiple 1/0 conductor terminals. Factory installed ground bars on all devices.
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
KLKD SERIES 10x38 FUSES
KLKD SERIES 0x FUSES 0 Vac/dc /0- A Fast Acting Description The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (0 x mm) is used in solar combiner boxes
CLASS CC/CD - CCMR SERIES POWR-PRO FUSES
Fuses UL Class CC / CD CLASS CC/CD - CCMR SERIES POWR-PRO FUSES 600 Vac Dual Element Time-Delay 2 / 10-60 A Ordering Information 1 AMPERE RATINGS 2/10 1 2 3 1 /2 6 1 /4 12 35 1/4 1 1 /4 2 1 /4 4 7 15 40
Loadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
SPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
FLQ /2A 500V TD CT Midget Fuse. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FLQ112 1-1/2A 500V TD CT Midget Fuse Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category
Capacitors. Individual & fixed bank. Individual & fixed capacitor banks. Low Voltage Network Quality
Individual & fixed capacitor banks Low Voltage L O W V O L T A G E N E T W O R K Q U A L I T Y Individual & fixed bank Capacitors Description High reliability Well proven features of ABB dry type power
TA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
Bussmann series Quik-Spec Coordination Panelboard
Quik-Spec electrical gear 12 Contents Bussmann series Quik-Spec Coordination Panelboard Section page Description Quik-Spec Coordination Panelboards Up to 400 A 2 600 to 1200 A 3 Quik-Spec elevator disconnects
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
CHCC_ (Class CC) CHM_ (UL midget/iec 10x38) CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
Supersedes Janaury 2016 BUSSMANN SERIES Specifications: Volts 600V (or less) UL 690V (or less) IEC 1000Vdc (or less) photovoltaic (PV) Amps 30A UL 32A IEC Short-Circuit Current Rating (SCCR) 33kA photovoltaic
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate
Marina Power and Lighting, Inc. General Specifications for the Newport Harbor Mate All Power Pedestals Must Meet the Following: Part I. General: 1.1 General Requirements- A.) Shall be tested and certified
Modulostar US10 Modular fuse-holders
Modulostar US10 FUSE HOLDERS, FUSE BASES AND SUPPORTS UL/CSA FUSE HOLDERS FEATURES & BENEFITS The innovative and comprehensive Modulostar range of Mersen fuse-holders. are finger-safe under IEC standards
DBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
Manufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
Section 10: Terminal Blocks
Terminal Blocks Section : Terminal Blocks CR151K Resilient Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...-2 Product Tables...-3, -4 Accessories...-3, -4 Technical Data...-5 Outlines
BUSWAY Low Voltage (Pow-R-Flex)
BUSWAY LOW VOLTAGE (POW-R-FLEX) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein and
Bulletin A 1497B 1497D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer
Bulletin, A, B, D Transformers Product Overview Transformers Bulletin A B D Type Control Circuit Transformer Machine Tool Transformer Control Power Transformer General Purpose Transformer Features Single,