PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.

Transcription

1 Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV. Conductor sizes through 2000 aluminum and copper cables. insulator provides maximum resistance to moisture, industrial pollution and seacoast pollution. is the most reliable insulator for use where insulator dryband arcing may occur. The G&W spring loaded elastomer stress control system is the most reliable method to provide continuous mechanical force to the elastomer, thereby compensating for elastomer permanent set. The resulting dielectric interfaces have high dielectric strength, prevent ingress of moisture and accommodate the thermal expansion and contraction of the cable. PSC termination eyebolt style shown. The electric stress control cone is a factory made soft elastomer which seals the cable shield against environmental moisture. The brass top cap has maximum resistance to industrial and seacoast pollution. O-rings seal the top cap to the porcelain. This is the most reliable and proven seal available in the industry. Options for external connection to the overhead system: Eyebolt Flat pad aerial lug-bus connection Clamp style aerial lug-bare wire The termination lower casting makes the cable shield ground connection with no extra parts, straps or soldering. Galvanized steel mounting brackets are available. G&W ELECTRIC PAGE 1

2 Physical Data Bracket Mounted Terminations Termination Housing Catalog. BIL (kv) Cable Conductor (AWG or ) Max. & Min. Cable Insul. O.D. (in.) Dry Arc Distance (in.) Leakage Distance Dia. Height Overall Height Max Dia. Weight (Lbs.) Top Cap Connection J9280/ / Eyebolt J9280-2/ Threaded Stud J9280-3/ Threaded Stud J9280-4/ Threaded Stud J / / Eyebolt J9283-2/ Threaded Stud J9283-3/ Threaded Stud J9284-2/ Threaded Stud J9284-3/ Threaded Stud J Threaded Stud Field Assembly Each G&W termination is complete with field assembly instructions. Only normal hand tools are required. The following is a summary of the field assembly. G&W ELECTRIC PAGE 2

3 Ordering Information The G&W PSC termination consists of three basic components: termination housing Elastomer kit (which contains the elastomer insulator, stress cone and the compression connector) External connector (which connects to the overhead system) (Mounting brackets are also available) To determine the three catalog numbers, read the following tables from left to right. Ordering Information- Termination Housing Voltage Rating Additional Description Termination Housing Catalog. 15kV PSC HSG #2 to 500 COND J9280-2/78 15kV PSC HSG 15kV PSC HSG 500 to 1000 COND 1000 to 2000 COND J9280-3/78 J9280-4/78 15kV PSC HSG #6 to 2/0 STR COND J9280/78 25kV PSC HSG #2 to 500 COND J9283-2/78 20/35kV PSC HSG #6 to 2/0 STR COND J /78 25kV PSC HSG 500 to 1000 COND J9283-3/78 35kV PSC HSG #2 to 500 COND J9284-2/78 35kV PSC HSG 35kV PSC HSG 46kV PSC HSG Minimum order quantity for all is 1 piece. Standard package quantity for all is 1 piece 500 to 1000 COND 1000 to 2000 COND 500 to 1000 COND J9284-3/78 J J G&W ELECTRIC PAGE 3

4 Ordering Information- Elastomer Kit Catalog Number Chart Elastomer Kit Insulation Voltage Class BIL (kv) Cable Conductor Range Termination Eye Bolt Connection Aerial Lug (clamp style) Catalog. Aerial Lug (flat pad) Catalog. Termination Housing Compression Connector Type (within housing) Elastomer Kit Catalog. 15kV /0 AWG Yes J9280/78 15kV kV kV AWG P (4/0-2000) P J9280-2/78 J9280-3/ J9280-4/78 25kV /0 AWG Yes J /78 25kV kV AWG P P J9283-2/78 J9283-3/ /34.5kV /0 AWG Yes J / kV kV kV kV AWG P P J9284-2/78 J9284-3/ (4/0-2000) J All conductor sizes in the range 6 AWG through 2000 are available. External connectors with P suffix are tin-plated aluminum. All others are bronze. J Aluminum Aluminum Aluminum 80 C J 80 C R 80 C Y 80 C L 80 C U 80 C P 80 C V 80 C M 80 C W 83 C H 83 C S 83 C Z 83 C L 83 C U 83 C P 83 C V 83 C H 83 C S 83 C Z 84 C L 84 C U 84 C P 84 C V 84 C M 84 C W 85 C P 85 C V G&W ELECTRIC PAGE 4

5 Ordering Information- External Connectors Eyebolt All PSC terminations require a connector to make the contact from the cable conductor to the bare wire overhead system. Those terminations having an eyebolt (2-2/0) use a pin-type compression connector. This connector is available in copper, aluminum or bi-metal styles. The pin accommodates conductor 6 through 2/0. The eyebolt accommodates conductors 2 through 2/0. PSC Terminations Threaded Stud Top Cap Clamp style or flat pad aerial lugs are available for conductor sizes 2 through The appropriate threaded stud connector is included with each elastomer kit. Order clamp style or flat pad aerial lug as needed. Lug Fits Threaded Stud on Terminal 2AWG-2000 Thread Size kv of Lug and Rating Terminal J9280-2/ /4-16 Lug Max. Wire () Aerial Lug- Clamp style Lug Min. Wire (AWG) Approx. Net Weight (Lbs.) Lug Catalog.. of Bolt Holes Aerial Lug- Flat Pad Hole Dia. Approx. Net Weight (Lbs.) Lug Catalog Solid / Solid P 2 9/ P Solid 5 4 9/ J9280-3/ Solid / /16 2 J9280-4/ / /0 Str / J9283-2/ / Solid / Solid 5 4 9/ J9283-3/ Solid / /16 2 J9284-2/ /4-16 J9284-3/ Solid / Solid P 2 9/ P Solid 5 4 9/ Solid / /16 2 J / /0 Str / Material: High Conductivity Electrical Bronze with High Tensile Silicon Bronze Hardware or Tin Plated Aluminum as illustrated above. For Tin Plated Bronze, use above number followed by /87D. G&W ELECTRIC PAGE 5

6 Ordering Information- Brackets G&W provides termination mounting brackets for structures, poles and crossarms. Brackets are galvanized steel. PSC Termination Bracket Selector Chart J9280/78 J9280-2/78 J9280-3/78 J9280-4/78 J9283-2/78 J /78 J9283-3/78 J9284-2/78 J9284-3/78 J9284/4 Fig. 1 X X X X Fig. 2 X X X X Fig. 3 X X X X X X Fig. 4 X X X X X X Fig. 5 X X X X X X Fig. 6 X X X X X X G&W Electric Company 305 W. Crossroads Pkwy Bolingbrook, IL USA Fax gwelec.com Catalog LVT PSC11 February, 2012