Insulators. Station post INSULATORS
|
|
|
- Joseph Atkinson
- 6 years ago
- Views:
Transcription
1 Station post INSULATORS
2 station post Station post The GAMMA and GAMMA-CERISOL brand of ANSI solid core porcelain station-post are ideally suited for substation bus support and switch applications. Station posts in this catalog are available in standard strength, high strength, and extra high strength, in ratings from 95kV BIL through 1800kV BIL, and for applications ranging from 7.5kV through 500kV operating voltages. Each insulator body is molded from the highest quality raw materials produced in our state-of-the-art mineral processing facilities, yielding a product of exceptional wet process workability, purity, and uniformity. The entire surface of each station post receives a smooth, uniform glaze, in either gray or brown, to provide maximum mechanical porcelain strength, to resist the accumulation of contaminants on the surface, and to facilitate ease of cleaning via rain or routine maintenance. In addition, the product line features uniform surface drying and voltage distribution to prevent flashover as well as dry-band arc suppression for high performance and long term reliability. All hardware fittings are manufactured using hot dipped galvanized malleable cast iron or ductile cast iron, and are designed specifically for all mechanical and electrical applications to ensure optimum performance and service longevity. Portland base mortar is used to secure the hardware to the porcelain body using a proven system that transfers the load uniformly from the hardware into the porcelain body. A bituminous coating is applied on the porcelain and the interior of the fittings to compensate for thermal expansion in extreme weather applications., 95kV BIL, 110kV BIL 202SU HU SU HU0110, 750kV BIL, 900kV BIL 291SU HU SU HT HU0900 Small station post , 150kV BIL, 200kV BIL, 250kV BIL 208SU HU SU HU SU HU0250, 1050kV BIL, 1300kV BIL 312ST SU HT HU EU ST SU HT EU ET1300, 350kV BIL, 550kV BIL, 650kV BIL 216SU HU SU HU SU HU0650, 1470kV BIL, 1550kV BIL, 1800kV BIL 330SU HT EU ET HT ST1800 Content
3 STATION POST INSULATORS Sheds Sheds are designed to provide excellent electrical insulation under highly contaminated conditions, and are strong enough to provide protection against mechanical intrusion. If the shed does break, it is designed to break cleanly, leaving the body undamaged and the insulator serviceable. In addition, our station post insulators utilize sheds that, when accompanied with adequate angle and radius geometry, will ensure the best protection against rain and pollution. 100% Solid Core Porcelain Body Each insulator body is molded from the highest quality raw materials produced in our state-of-the-art mineral processing facilities, yielding a product of exceptional wet process workability, purity, and uniformity. Hardware All our Station Post hardware fittings are manufactured using hot dipped galvanized malleable cast iron or ductile cast iron. Are designed specifically for all mechanical and electrical applications to ensure optimum performance and service longevity. Glaze The entire surface of each Station Post receives a smooth, uniform glaze in either gray or brown to provide maximum mechanical porcelain strength, to resist the accumulation of contaminants on the surface, and to facilitate ease of cleaning via rain or routine maintenance. Cementing With Portland base mortar, hardware fittings are cemented to the porcelain body using a proven system that transfers the load uniformly from the hardware into the porcelain body. A bituminous coating is applied on the porcelain and the interior of the fittings to compensate for thermal expansion in extreme weather applications. World class manufacturing facilities and engineering expertise, along with in-house tooling and development capabilities, give us the ability and skill set required to produce custom designed station posts for a wide variety of applications and customer specifications. Experience the GAMMA Difference!
4 , 95 kv BIL Ø1/2" - 13 Ø5/8" /2" 10" 3" Ø4 1/4" Ø7" TR-202 5" Ø6.25" Ø7.24" TR SU HU0095 TR-202 TR-222 Leakage distance 10 1/2 10 1/ Typical application voltage Note 2: can be ordered with M12 thread size
5 , 110 kv BIL Ø 1/2" - 13 Ø 5/8" " 12" 3" 5" Ø4 1/4" Ø6.25" Ø7" Ø7.24" TR-205 TR SU HU0110 TR-205 TR-225 Leakage distance 15 1/2 15 1/ Typical application voltage Note 2: can be ordered with M12 thread size
6 , 150 kv BIL Ø 1/2" - 13 Ø 5/8" " 15" 3" Ø4 1/4" Ø6 1/2" 5" 1" Ø8.46" TR-208 TR SU HU0150 TR-208 TR-227 Leakage distance Typical application voltage Note 2: can be ordered with M12 thread size
7 , 200 kv BIL Ø 1/2" - 13 Ø 5/8" " 20" 3" 5" Ø4 1/4" 1" Ø7 1/2" Ø8.58" TR-210 TR SU HU0200 TR-210 TR-231 Leakage distance Typical application voltage Note 2: can be ordered with M12 thread size
8 , 250 kv BIL Ø 1/2" - 13 Ø 5/8" " 24" 3" Ø4 1/4" Ø7" 5" 1" Ø8.74" TR-214 TR SU HU0250 TR-214 TR-267 Leakage distance Typical application voltage Note 2: can be ordered with M12 thread size
9 , 350 kv BIL Ø1/2" - 13 Ø 5/8" " 30" 3" Ø4 1/4" Ø8.1" 5" " Ø9.1" TR-216 TR SU HU0350 TR-216 TR-278 Leakage distance Typical application voltage Note 2: can be ordered with M12 thread size
10 , 550 kv BIL Ø6.22 Ø8.46 TR-286 Ø9.4 TR SU HU0550 TR-286 TR-287 Leakage distance Sheds Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter
11 , 650 kv BIL Ø6.22 Ø8.46 TR-288 Ø9.1 TR SU HU0650 TR-288 TR-289 Leakage distance Sheds Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter
12 , 750 kv BIL Ø6.22 Ø8.78 TR-291 Ø9.53 TR SU HU0750 TR-291 TR-295 Leakage distance Sheds Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter
13 , 900 kv BIL Ø Ø6.22 Ø8.39 Ø9.33 Ø9.33 TR-304 TR-308 HT TR-308 HU EXTRA - 304SU HT HU0900 TR-304 TR-308 TR-308 Leakage distance Sheds unit Sheds unit Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter.
14 , 1050 kv BIL Ø6.22 Ø8.46 TR-312 ST Ø6.22 Ø8.46 TR-312 SU Leakage distance Sheds unit 1 Sheds unit 2 Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter. 312ST1050 TR SU1050 TR
15 , 1050 kv BIL Ø 3/4" - 11UNC Ø8.98 Ø Ø9.41 TR-316 HT Ø9.41 TR-316 HU Ø10.43 TR-362 EU EXTRA - 316HT HU EU1050 Leakage distance Sheds unit 1 Sheds unit 2 TR Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter. Note 3: can be ordered with M20 thread size if 3/4-10UNC diameter. TR TR
16 , 1300 kv BIL Ø Ø9.06 TR-324 ST Ø9.06 TR-324 SU Leakage distance Sheds unit 1 Sheds unit 2 324ST1300 TR Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter SU1300 TR
17 , 1300 kv BIL Ø 3/4" - 11UNC Ø8.46 Ø10.04 Ø Ø 3/4" - 11UNC Ø10.04 TR-367 HT Ø10.43 TR-368 EU EXTRA - Ø 3/4" - 11UNC Ø10.43 TR-369 ET EXTRA - 367HT EU ET1300 TR-367 TR-368 Leakage distance Sheds unit 1 Sheds unit Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter. Note 3: can be ordered with M20 thread size if 3/4-10UNC diameter TR
18 , 1470 kv BIL Ø6.22 Ø 3/4" - 11UNC Ø8.78 Ø10.24 Ø Ø9.53 Ø 3/4" - 11UNC Ø9.72 Ø10.32 Ø 3/4" - 11UNC Ø10.32 TR-330 SU TR-371 HT TR-372 EU TR-373 ET EXTRA - EXTRA - 330SU HT EU ET1470 TR-330 TR-371 TR-372 TR-373 Leakage distance Sheds unit Sheds unit Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter. Note 3: can be ordered with M20 thread size if 3/4-10UNC diameter
19 , 1550 kv BIL 64.0 Ø Ø Ø 3/4" - 11UNC Ø10.83 TR-379 HT 379HT1550 TR-379 Leakage distance Sheds unit 1 Sheds unit 2 Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter
20 , 1800 kv BIL Ø6.69 Ø Ø UNIT 3 Ø Ø 3/4" - 11UNC Ø10.83 TR-391 ST 391ST1800 TR-391 Leakage distance Sheds unit 1 Sheds unit 2 Sheds unit 3 Note 2: can be ordered with M16 thread size if 5/8-11UNC diameter
21 Small station post 3/8-16 Thread (Galv. Steel) TYP 3/8-16 Thread (Galv. Steel) TYP 3/8-16 Thread (Galv. Steel) TYP 6 3/4" 7" 8" 1" 2 1/4" Ø3 7/10" Ø5 1/2" 1" 2 1/4" Ø3 7/10" Ø5 1/2" 1" 2 1/4" Ø3 7/10" Ø5 1/2" /8-16 Thread (Galv. Steel) TYP 3/8-16 Thread (Galv. Steel) TYP 9" 10" 1" 2 1/4" Ø3 7/10" Ø5 1/2" 1" 2 1/4" Ø3 7/10" Ø5 1/2" Leakage distance 13 9/ /4 17 1/2 20 7/8 24 3/8 Cantilever strength, pounds, pounds Torsion strenght, inch-pounds Compression strenght, pounds Low-frequency withstand, 10 sec. wet Basic insulation level (BIL), kv Note: ANSI 70 gray is standard. Brown available by request.
PPC Porcelain Solid Core Post Insulators and Operating Rods ANSI
ELECTRIFYING THE WORLD PPC Porcelain Solid Core Post Insulators and Operating Rods ANSI 2 ANSI POST INSULATORS INTRODUCTION High Tech TR Post Insulators. Never compromise on safety! Better design enables
CATALOG NUMBER 081 BALTIMORE, MARYLAND
CATALOG NUMBER 081 LOCKE SUSPENSION INSULATORS BALTIMORE, MARYLAND LOCKE SUSPENSION S S N INSULATORS S GUIDE TO SELECTION OF LOCKE SUSPENSION INSULATORS M&E Strength BALL & SOCKET TYPE CLEVIS TYPE Without
produces and delivers products worldwide can provide the optimal are dedicated to supplying you with superior advice and global support.
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. Long Rod Insulators Only a company that develops, produces and delivers products worldwide can provide the optimal solution for
produces and delivers products worldwide can provide the optimal solution for your requirements. are dedicated to supplying you with
www.ppcinsulators.com The very Best. The very Best. That s what we deliver. Only a company that develops, produces and delivers products worldwide can provide the optimal solution for your requirements.
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
25-kV Apparatus Bushings A Series (clamp-in) for Elbow to Air-Insulated Service 200 Amp and 600 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 15 kv or 25 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric
25 kv Apparatus Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
PORCELAIN INSULATORS
Solid Core Station Post Insulator PORCELAIN INSULATORS It is an insulator of generally columnar shape, and it consists of one post insulator unit or an assembly of such units and is intended to give rigid
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable ELRIM Cycloaliphatic
35-kV 200-kV BIL Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection 35 kv Separable Insulated Connector (elbow) Bus Bar or Other Component Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
15 kv and 25 kv Thru-Bushings
Page 1 2001 ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric strength, dielectric loss and power factor Choice of shapes allows design innovation
35-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 35 kv Separable Insulated Connector (elbow) Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other
Station Post Insulators
TE Energy covers a wide range of polymeric, porcelain and hybrid insulators. For decades these products have demonstrated reliable performance in various types of applications all over the world. TE s
TYPE BLT DISCONNECT SWITCHES
TYPE BLT DISCONNECT SWITCHES OUTDOOR-HOOK OPERATED 8.3KV through 38KV A & A Current Furnished with hooks for loadbreak tool REA/RUS approved S M C O 1 BLT PARALLEL BLADE DISTRIBUTION CLASS DISCONNECT SWITCH
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
RODURFLEX LAPP INSULATOR COMPANY LLC THE POWER OF RELIABILITY THE COMPOSITE INSULATOR SYSTEM. Over 30 Years Experience with the RODURFLEX System
RODURFLEX THE COMPOSITE INSULATOR SYSTEM Over 30 Years Experience with the RODURFLEX System LAPP INSULATOR COMPANY LLC THE POWER OF RELIABILITY WWW.LAPPINSULATOR.COM HISTORY OF LAPP INSULATOR GMBH A PROUD
CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B
CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B TCV2 Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com
Product Specifications for Aluminum Vertical Break Switches
1. General a) This specification covers the design, manufacture, and shipment of aluminum vertical break switches, both air-break and load-break configurations, for substation and transmission switching
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench
VariSTAR Type AZE station-class surge arresters for systems through 345 kv IEEE certified
Surge s Catalog Data CA235022EN Supersedes TD235009EN September 2014 COOPER POWER SERIES VariSTAR Type AZE station-class surge arresters for systems through 345 kv IEEE certified General Eaton s Cooper
HUBBELL Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
Catalog 14B January 2015 HUBBELL Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch.
INSULATORS.
S www.transnet.co.nz WARRANTY Connectivity offer a year manufacturing warranty on all branded Porcelain Insulators up to 66kV. In the event a insulator from this range is found to demonstrate manufacturing
Kuhlman Electric Corporation Volt Instrument Transformers
Kuhlman Electric Corporation 46000 Volt Instrument Transformers 46000 Volt Table of Contents Description Model Page Wound, Dry-Type VT (High Accuracy available) U/VRU-52(H) 3-4 Wound, Oil-Filled VT (High
Product Specifications for Phase Over Phase GOABS(r)
1. General a) This specification covers the design, manufacture, and shipment of phase-over-phase, 1-way, 2-way, 3-way, and 4-way, gang-operated disconnecting switches, both air-break and load-break, for
Transformer bushings, type GOH. Technical guide
Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
3EP1 Surge Arrester. Metal-oxide surge arrester without series gaps for high-voltage systems up to U m. = 170 kv
3EP1 Surge Arrester Metal-oxide surge arrester without series gaps for high-voltage systems up to U m = 170 kv Rated voltage up to 180 kv Nominal discharge current 10 ka, 8/20 µs Line discharge class LD1,
Kuhlman Electric Corporation Volt Instrument Transformers
Kuhlman Electric Corporation 34500 Volt Instrument Transformers 34500 Volt Table of Contents Description Model Page Wound, Dry-Type VT Y (High Accuracy available) PTT-200-9710(H) 3-4 Wound, Oil-Filled
Bushings for High Voltage AC Applications
Bushings for High Voltage AC Applications Selection guide 1ZSE 2750-100 en, Rev. 3, 2006-03-15 During selection of for high voltage applications several important factors have to be considered to ensure
PABS. AIR-TO-SF 6 - Gas-insulated bushing IEC STANDARDS ANSI STANDARDS AN ALSTOM COMPANY
PABS Air-to-SF 6 Bushings 7.5-800 kv BUSHINGS AIR-TO-SF 6 - Gas-insulated bushing IEC STANDARDS 7 - ANSI STANDARDS AN ALSTOM COMPANY PABS bushings are gas-insulated types that meet IEC 7, ANSI/IEEE or
Hi*Lite XL Suspension Insulators
27 Hi*Lite XL Suspension Insulators Table of Contents Page Design... 2 Rod... 2 End s... 2 Weathersheds... 2 Interface... 2 Leakage... 2 Washability... 2... 2 Lengths Available... 2 Product Updates...
GENERAL. CONSTRUCTION External
Surge Arresters VariSTAR Type AZG4 Surge Arresters for Systems through 400 kv IEC 20-kA; Line Discharge Class 4 Electrical Apparatus I235-84 GENERAL VariSTAR AZG4 Surge Arresters incorporate the latest
3EQ Composite Housed Surge Arresters
Power Transmission and Distribution 3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability A perfect Combination of Cost-Savings, Safety and Reliability 3EQ Surge Arresters: Your
BHATINDA CERAMICS PRIVATE LIMITED (Mfrs/Exporters of High Tension Porcelain Insulators)
(Mfrs/Exporters of High Tension Porcelain Insulators) Regd. (O) & Works:- Vill. Jodhpur Romana Dabwali Road, Bathinda (Pb.) 151001 India. Ph. No. 0164-2280715, 2282432 Fax- 0164-2282387, 2283927 Web Site:
High Voltage Surge Arresters Station Class
Power Transmission and Distribution High Voltage Surge Arresters Station Class Product Overview High Voltage High Protection Just as the Golden Gate Bridge has successfully defied all winds, weather and
34-SDMS-01 SPECIFICATIONS FOR
SPECIFICATIONS FOR M V DROPOUT FUSE CUT OUTS This specification is property of SEC and subject to change or modification without any notice CONTENTS C l a u s e s: Page No. 1- SCOPE 3 2- CROSS REFERENCES
Type L Cutouts. UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout. Description
Type L Cutouts UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout Electrical Apparatus 327-30 Description Cooper Power Systems has set a new standard of excellence for polymer distribution
Molded Vacuum Reclosers The recloser you want, all in one package. Single- and Three-Phase Molded Vacuum Reclosers, 15 38kV
The recloser you want, all in one package. Single- and Three-Phase, 15 38kV The need for automated reclosers has never been greater, but many of today s reclosers come with penalties. They weigh too much,
GE TRANQUELL Surge Arresters
GE Grid Solutions GE TRANQUELL Surge Arresters Product Selection Guide IEC Line Discharge Classes with 2, 3, and 4 Polymer Housings GE Surge Protection The performance and reliability of today s electric
UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout
Fusing Equipment Catalog Data CA132035EN Supersedes November 2015 COOPER POWER SERIES UltraSIL polymer-insulated and porcelain loadbreak Type LB open distribution cutout Description Eaton has set a standard
WINNING ELECTRICAL CO., LIMITED
A silicone polymer line post insulator mainly consists of a core rod (ECR type or FRP type), silicone rubber housing and metal end fittings. Usually, polymer line post insulators are mounted to a supporting
5 SPECIAL CRIMPING TECHNOLOGY
Composite Insulators 1 HIGHEST QUALITYSILCON RUBBERS Are used only for FCI insulators, which gives one of the most important key property of the products. 2 CHEMCAL BONDING Of silicone rubber to metal
PRODUCT CATALOGUE. Overhead System
PRODUCT CATALOGUE Overhead System Information Tel : 03-4777547 Fax : 03-4777570 E-mail : overseas@jaker.com.tw Web : www.jaker.com.tw Add : No.787, Xinwen Rd. Xinwu Dist., Taoyuan City 327, Taiwan Contents
PRECISE HIGH VOLTAGE DISTRIBUTION FUSE CUTOUT
PRECISE HIGH VOLTAGE DISTRIBUTION FUSE CUTOUT COS 38kV 100A 8kA asym. Type PGC Parallel groove terminal bronze with tin plated NEMA Bracket type B Upper contact copper with silver plated Cap - Cast bronze
Polymer Insulators A Better Solution
Polymer Insulators A Better Solution October 2016 LET S CONNECT POLYMER INSULATORS Design derived from PLP s many years of worldwide experience and tested to adhere to ANSI C29.5 and ANSI 29.6 insulator
Composite Insulators Suspensions Line Posts Brace Posts Station Posts
Composite Insulators Suspensions Line Posts Brace Posts Station Posts Quality, reliability and consistency for over four decades As an alternative and complement to our range of proven ceramic insulators,
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC 60137-2008 High current bushings for transformer Features Bushing Type CFPT version Porcelain Insulator Trench RIG technology for
D-73P disconnect and bypass switches
Switches atalog Data 008005EN Supersedes pril 2016 OOPER POWER SERIES D-73P disconnect and bypass switches ontents Description Page D-73P disconnect switch....2 D-73P3 bypass switch....5 D-73P-D cutout
Technical Specification For Outdoor Substation Harmonic Filter Banks
Technical Specification For Outdoor Substation Harmonic Filter Banks One of Three 5th, 11th & 23rd, 34.5 kv, Rated Harmonic Filter Assemblies Provided for a Central Venezuela Heavy Oil Production Field
Easy-On II Terminations
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables, concentric neutral, metal tape shielded or wire shielded cables without need for additional
Volt Instrument Transformers
www. kuhlman. com Kuhlman Electric Corporation Instrument Transformers 1 Table of Contents Description Model Page Wound, Oil-Filled VT (High Accuracy available) UTE-145-OH 3-4 Wound, Oil-Filled CCVT (High
JOSLYN. Underground Cable Accessories. Table of Contents. JPT/JIPT Polymer Terminations. ShrinkTite Sealing Kits. Easy-On II Terminations
Underground Cable Accessories JOSLYN Table of Contents JPT/JIPT Polymer Terminations 15kV, 25kV & 35kV ShrinkTite Sealing Kits 1kV In-Line Splice Sealing Kit Cable Jacket Sealing Kit Easy-On II Terminations
DynaVar Arresters IEC Line Discharge Classes 2, 3, 4 & 5
Section 204-1 204 DynaVar Arresters IEC Line Discharge Classes 2, 3, 4 & 5 Web: http://www.hubbellpowersystems.com E-mail: hpsliterature@hps.hubbell.com Printed in USA RGS 1M 204-2 Table of Contents Page
3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability
3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability Power Transmission and Distribution 1 A perfect Combination of Cost-Savings, Safety and Reliability 3EQ Surge Arresters:
Outdoor Distribution (15 kv through 25 kv) S&C Fault Tamer Fuse Limiter
Outdoor Distribution (5 kv through 25 kv) S&C Fault Tamer Fuse Limiter Introducing S&C s new generation of pole-top transformer protection... Application Although the S&C Fault Tamer Fuse Limiter handles
Single pole connectors
Cam-Lok J-Series E1016 receptacles Cable Size #6 AWG 250 MCM 600V AC/DC, Up to 400A Continuous NEMA 3R J-Series E1016, elastomeric, threaded stud Double cam principle provides a positive, vibration-proof
Design Test Report Report No. EU1529-H ANSI C29.18 PROTOTYPE/ CEA LWIWG 02 DESIGN TEST REPORT Silicone Rubber 25 kv Veri*Lite Line Post 80S025
Design Test Report Report No. EU1529-H ANSI C29.18 PROTOTYPE/ CEA LWIWG 02 DESIGN TEST REPORT Silicone Rubber 25 kv Veri*Lite Line Post 80S025 This test report records the results of laboratory tests made
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
Series 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
Austin Insulators Inc. Manufacturers of Austin Base & Guy Insulators and Isolation Transformers for Radio Antenna Towers.
Austin Insulators Inc. Manufacturers of Austin Base & Guy Insulators and Isolation Transformers for Radio Antenna Towers Product Catalogue e&oe 05.11.01.a Austin Insulators Inc. Austin Ring Type Isolation
1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide
1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
S&C Fault Tamer Fuse Limiter. Outdoor Distribution (15 kv through 25 kv)
S&C Fault Tamer Fuse Limiter Outdoor Distribution (5 kv through 25 kv) Introducing S&C s new generation of pole-top transformer protection... Application Although the S&C Fault Tamer Fuse Limiter handles
Dead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability
Dead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
UNLEASH THE POWER REAL-WORLD SOLUTIONS
FLUID POWER UNLEASH THE POWER The fluid power industry is not only solidifying a hold on current applications, it is unleashing its knowledge into everincreasing frontiers. Excessive temperature and diverse
Bharat Heavy Electricals Limited. Ceramic Business Unit
Bharat Heavy Electricals Limited Ceramic Business Unit Bharat Heavy Electricals Limited The Company Bharat Heavy Electricals Limited is the largest Engineering and Manufacturing Enterprise of its kind
Catalog 14A January 2013
Catalog 14A January 2013 Page 1 January 2013 Type AR (Automation-Ready) Switch 14.4kV, 25kV or 34.5kV 900 Amperes Continuous/Interrupt Description The Hubbell unitized Type AR switch is a distribution-level,
Type SDV6 distribution circuit breaker. Top performance - proven reliability. Answers for energy.
Type SDV6 distribution circuit breaker Top performance - proven reliability Answers for energy. Table of contents Introduction 2-4 Type 3AH3 stored-energy operating mechanism 6 Vacuum interrupters 7 Ratings
OTCF. Grid Solutions. Capacitor Voltage Transformers 72.5 kv to 800 kv. Quality Product Design. Seismic Withstand Capability.
GE Grid Solutions OTCF Capacitor Voltage Transformers 72.5 kv to 800 kv In high and extra high voltage transmission systems, capacitor voltage transformers (CVTs) are used to provide potential outputs
PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
ELECTRIC STRESS ANALYSIS ON 11KV INSULATOR
ELECTRIC STRESS ANALYSIS ON 11KV INSULATOR M. Umesh 1, K.V.S. Narasimha Swamy 2 1PG Scholar, Department of EEE, Sree Vidyanikethan Engineering College, Tirupathi-517102, India. 2Assistant professor, Department
Transmission Switching
CATALOG BULLETIN GENERAL APPLICATION Southern States supplies a wide offering of Transmission Switching solutions in response to an increasing need for improved system reliability and reduced installation
1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
023 : 2006 CEB STANDARD. 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA
023 : 2006 CEB STANDARD 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA Specification for 12kV & 36kV LOAD BREAK SWITCHES CEB Standard 023 : 2006 CEYLON ELECTRICITY BOARD No. 50, Sir
Disconnect & ByPass Switches
Disconnect & ByPass Switches Disconnect & Oil Circuit Recloser Bypass Switches; Regulator & Current Transformer Bypass Switches Electrical Apparatus K-SEC 060 & 090 Contents Type D-73 Distribution Class
C O M M E R C I A L O V E R H E A D D O O R S. Buyer s Guide. THe Door T o QUal i T Y.
C O M M E R C I A L O V E R H E A D D O O R S CommerCial Buyer s Guide THe Door T o QUal i T Y. C.H.I. doors are constructed using the finest raw materials, produced by the hands of skilled craftsmen,
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Spherical Roller Bearings Units: Rexnord PT Select Series
Excerpt from Rexnord Bearings Catalog #BR101-100EN Spherical Roller Bearings Units: Rexnord PT Select Series Contents Page Features and Benefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow Blocks
KEE HING CHEUNG KEE CO., LTD. DLFTZ CHANG HING KEE INT L INDUSTRY & TRADE CO., LTD.
KEE HING CHEUNG KEE CO., LTD. DLFTZ CHANG HING KEE INT L INDUSTRY & TRADE CO., LTD. INSOLATOR CONTENT PORCELAIN INSULATOR... 3 Suspension Insulator... 3 BS Ball & Socket Type... 3 Anti-Pollution Type (With
1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Technical Specification for 33 KV 200 AMPs,H.G,Fuse set.
Technical Specification for 33 KV 200 AMPs,H.G,Fuse set. 1. SCOPE:- This specification covers the manufacture, testing and supply of 33KV 200 Amps, H.G. Fuse sets 2. The 33 KV H.G. Fuses shall be suitable
Copper Vertical Break Switch kv A.
Bulletin DB-106C05 Type V2-C Copper Vertical Break Switch 7.2-69 kv 600-2000 A. Designed for Simplicity V2-C APPLICATION The Cleaveland/Price V2-C is a three pole, group operated, copper vertical break
Power and Distribution Transformers
Power and Distribution Transformers VRT Power Ltd. We Enable Energy VRT is a modern manufacturer for high-performance oil-immersed power transformers up to 800 MVA 500 kv. Customized design and the development
Aluminum Vertical Break Switch kv A.
Bulletin DB-C106AA05 Type V2-CA Aluminum Vertical Break Switch 7.2-69 kv 600-2000 A. Designed for Simplicity V2-CA APPLICATION The Cleaveland/Price V2-CA is a three pole, group operated, aluminum vertical
Spherical Roller Bearings Units: Rexnord PT Select Series
Spherical Roller earings Units: Rexnord PT Select Series Contents Page eatures and enefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow locks 198 lange locks 202 Industries Served Aggregates
Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st Dry-type transformers Innovative Technology
Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st 2014 Dry-type transformers Innovative Technology What is a dry transformer? ABB manufactures a transformer which does
High Voltage Cable Accessories Product catalog
High Voltage Cable Accessories Product catalog 1300 780 831 info@cablegrid.com.au www.cablegrid.com.au Table of Contents page 1 HV Terminations 3 Dry type plug in GIS and Transformer terminations 5 GIS/Transformer
Figure 1. HX cutout fuseholders.
Fusing Equipment Kearney Open Distribution Cutout - Type HX Electrical Apparatus K-SEC 010 GENERAL Application Versatility Cooper Power Systems Kearney HX cutouts can be quickly and economically adapted
Surge Arrester 3EL2 superior protection up to 550 kv
Certified according to IEC 60099-4 Edition 2.1 (2006) Surge Arrester 3EL2 superior protection up to 550 Light weight. Strong performance. Answers for energy. Simply irresistible. By resisting wear in any
TYPE V CENTER BREAK SWITCH
TYPE V CENTER BREAK SWITCH 3-PHASE, GROUP-OPERATED (SUBSTATION AND TRANSMISSION APPLICATIONS) *Available in Copper Horizontal upright, vertical or underhung mounting 15KV through 230KV 600A through 4000A
Figure 1. HX cutout fuseholders. Positive Interruption
Fusing Equipment Kearney Open Distribution Cutout - Type HX Electrical Apparatus 327-10 general Application Versatility Cooper Power Systems Kearney HX cutouts can be quickly and economically adapted to
Folding Sliding System SF75
Profile system Folding wall in thermally insulated aluminium profiles. The structural depth of the profile is 75 mm, which corresponds with the structural requirements. The rated value of the heat transfer
Typically there are a number of different styles of batteries including: STARTING / CRANKING (TRADITIONAL AUTOMOTIVE TYPE BATTERIES)
3 About ACDelco batteries Typically there are a number of different styles of batteries including: STARTING / CRANKING (TRADITIONAL AUTOMOTIVE TYPE BATTERIES) Which are designed primarily for short term
1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
GROUP C. Apparatus Bushing.
GROUP C Apparatus Bushing Tel : 82-31-420-6650~3 FAX : 82-31-424-7300 www.pyungil.com Epoxy Bushing for 25kV 630A APPARATUS BUSHING (125kV BIL) apparatus bushing K650P2 K650P2 will accept an elbow connectors
THOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
BOWTHORPE EMP MEH SURGE ARRESTERS (IEC) ENERGY /// MEH SURGE ARRESTERS IEC
BOWTHORPE EMP MEH SURGE ARRESTERS (IEC) GENERIC TECHNICAL DATA Maximum system voltage U m 800 System voltage U s 750 Nominal discharge current ka 20 High current impulse (4/10 µs) ka 100 Arrester class
I Surge Arresters. UltraSIL Polymer-Housed VariSTAR Type U3 Surge Arrester for Systems through 275 kv IEC 10 ka; Line Discharge Class 3 GENERAL
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type U3 Surge Arrester for Systems through 275 kv IEC 10 ka; Line Discharge Class 3 Electrical Apparatus I235-93 GENERAL UltraSIL Polymer-Housed VariSTAR