Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
|
|
|
- Gabriella Eaton
- 5 years ago
- Views:
Transcription
1 TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel or at right angles to rod or tube. Especially good for fence posts. High copper alloy cast body with DURIUM U-bolts, nuts and lockwashers, permit entire connection to be buried in ground or concrete without danger of corrosion. One-wrench installation. UL467 Listed. Acceptable for direct burial. Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GAR114C GAR1126 1/4 1/2 4 Sol. - 2/0 Str. 2-1/2 1-7/8 GAR1129 GAR644C 3/8 GAR Sol. - 2/0 Str. 2-7/8 2-1/8 3/8 5/8-3/4 GAR6429 GAR /2 1/2 2-1/2 GAR144C 2-3/4 GAR Sol. - 2/0 Str. 3/8 2-3/8 1/2-3/4 7/8-1 3 GAR1429 GAR /4 1/2 2-3/4 GAR154C 2-7/8 GAR Sol. - 2/0 Str /8-1-1/4 GAR /8 3/8 2-5/8 GAR /2 1/2 GAR164C GAR Sol. - 2/0 Str. 3-1/2 3/ /4 1-3/8-1-1/2 GAR1629 GAR /4 1/2 3-3/8 GAR174C GAR Sol. - 2/0 Str. 4 3/8 3-1/4 1-1/2 1-5/8-1-7/8 GAR1729 GAR /8 1/2 2-5/8 GAR184C 4-1/4 GAR Sol. - 2/0 Str /8 GAR /2 3/8 3-3/4 GAR /4 1/2 4-1/8 GAR194C GAR Sol. - 2/0 Str. 5 3/8 4-1/4 2-1/2 2-1/2-7/8 GAR1929 GAR /8 1/2 4-5/8
2 TYPE GAR (Continued) FENCE POST GROUNDING CONNECTOR Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GAR204C 5-5/8 3/8 4-3/4 GAR Sol. - 2/0 Str /2 GAR2029 GAR /8 1/2 5-1/4 GAR214C GAR Sol. - 2/0 Str. 6-1/4 3/8 5-3/8 3-1/2 3-1/2-4 GAR2129 GAR /4 1/2 5-3/4 GAR224C GAR Sol. - 2/0 Str. 6-3/8 3/8 5-7/ /2 GAR2229 GAR /8 1/2 6-1/4 GAR244C 3/8 6-7/8 GAR Sol. - 2/0 Str. 7-3/4 5 GAR2429 1/2 7-1/4 GAR /8 GAR /16 1/2 8-3/8 Contact BURNDY for additional pipe and wire size combinations not shown. D-29
3 TYPES GAR-BU AND GAR3902 SERIES GROUND CONNECTORS D-30 Type GAR-BU is a high-conductivity copper ground connector for connecting a small to medium range copper ground conductor to water pipe as well as structural and reinforcing rod shapes. Universal acceptance of several sizes of cylindrical shapes makes this suitable for industrial construction and maintenance work as well as cathodic protection. Cable clamp swivels to permit parallel grounding of one pipe or 90 degree cable run for grounding several parallel pipes. Single wrench installation. UL467 Listed and CSA certified. * Type GAR-BU is supplied with DURIUM silicon bronze hardware and is listed for direct burial. * Features and benefits Cable clamp swivels at 90. Permits parallel grounding of one pipe or a 90 cable run for grounding several parallel pipes. One-wrench installation. Simplified installation. DURIUM silicon bronze hardware (-BU Series)*. Long lasting corrosion resistance and acceptable for direct burial in earth or concrete. UL467 Listed. Provides quality assurance to recognized industry NEC standards from an independent party. CATALOG NUMBER * CABLE RANGE IPS SIZE O.D. RANGE H J W TIGHTENING TORQUE GAR3902-BU 1/ GAR3903-BU 1-1/ GAR3904-BU 2-1/2-3-1/ GAR3905-BU #4-4/0 AWG 3/8-16 GAR3906-BU in. - lbs. GAR3907-BU GAR3908-BU GAR3909-BU GAR3902 1/ GAR / GAR /2-3-1/ GAR #4-4/0 AWG 3/8-16 GAR in. - lbs. GAR GAR GAR TYPE GAR-RB For Reinforcement Bar CATALOG COPPER CONDUCTOR NUMBER REBAR IPS SIZE O.D. RANGE ROD MIN. MAX. GAR644C-RB #3-6 ( ) 3/ /8-3/4 8 Sol. 4 Str. UL467 listed for direct burial in earth or concrete.
4 TYPE GAR-TC WATER PIPE GROUND CONNECTOR Type GAR-TC is a high-conductivity copper ground connector that features a pre-drilled pad, allowing a 2-hole compression terminal to be directly connected to water pipe as well as structural and reinforcing rod shapes. Universal acceptance of several sizes of cylindrical shapes makes this suitable for industrial construction and maintenance work as well as telecommunications grounding. Terminal may be mounted parallel, 45 or 90 degrees to the pipe. Acceptable for direct burial. Features and Benefits PATENTED Large, smooth connector contact area between pipe and ground clamp Provides large surface contact area to maximize contact area between connector and pipe. The GAR-TC mounting pad permits parallel, 45 or 90 angle connections to the pipe. Provides maximum flexibility for field installation. Pre-drilled pad for (2) 3/8 bolts on 1 centers. Allows direct mounting of (2) hole compression terminals up to 750 kcmil to pipe. DURIUM silicon bronze hardware. Provide long lasting corrosion resistance acceptable for direct burial in earth or concrete. One-wrench installation. Simplified installation. UL467 Listed. Provides quality assurance to recognized industry NEC standards from an independent party. Type GAR-TC is acceptable for direct burial D-31 Fig. 1 MOUNTING PAD FOR (2) 3/8" BOLTS - 1" L CAST HIGH COPPER ALLOY SADDLE COMPRESSION LUG WITH PAD FOR (2) 3/8" DIA. BOLTS ON 1" CENTERS. 750 KCMIL MAX. PIPE DIA. J MOUNTING PAD DURIUM 3/8" SILICON BRONZE HARDWARE Fig. 2 CATALOG FIG. NUMBER NO. I.P.S. O.D. SIZE H J W TIGHTENING TORQUE GAR3902TC 1 1/ GAR3903TC 1 1-1/ GAR3904TC 1 2-1/2-3-1/ / in.-lbs. GAR3905TC GAR3906TC GAR3907TC GAR3908TC / in.-lbs. GAR3909TC Add suffix -TNET for electro-tin plated connector and electro-tin plated DURIUM silicon bronze hardware. Tin plated catalog number includes mounting hardware for second bolt hole. 2 TMH-289 includes (1) 38 x 125 HEB, (1) 38 CHEN, (1) 38 SW and (2) 38 FW. Order separately. NOTE: Clean pipe surface beneath saddle until virgin metal is exposed, install GAR-TC ground connector and for maximum conductivity, apply PENETROX -E oxide inhibiting compound around perimeter of the saddle.
5 TYPE GD CABLE TO ROD/TUBE GROUND CONNECTOR For Two Copper Cables to Rod or Tube D-32 High copper alloy ground connector for joining a range of two parallel cables to rod or pipe. Especially good for grounding fence posts. High copper alloy cast body with DURIUM U-bolts, nuts, and lockwashers make the GD suitable for burial in ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GD Sol. - 2/0 Str /8-1-1/4 GD /8 2-5/8 GD Sol. - 2/0 Str /4 1-3/8-1-1/2 3-1/2 GD1629 3/8 GD174C 3-1/4 GD Sol. - 2/0 Str /2 1-5/8-1-7/8 GD1729 GD /8 1/2 3-5/8 GD184C GD Sol. - 2/0 Str. 4-3/8 3/8 3-3/ /8 GD1829 GD /8 1/2 4-1/8 GD194C GD Sol. - 2/0 Str. 3/8 4-1/4 2-1/2 2-1/2-2-7/8 5 GD1929 GD /2 4-5/8 GD204C GD Sol. - 2/0 Str. 5-5/8 3/8 4-7/ /2 GD2029 GD /8 1/2 5-1/4 GD214C GD Sol. - 2/0 Str. 6-1/4 3/8 5-3/8 3-1/2 3-1/2-4 GD2129 GD /8 1/2 5-3/4 GD224C GD Sol. - 2/0 Str. 6-3/8 3/8 5-7/ /2 GD2229 GD /8 1/2 6-1/4 Complies with NFPA HEAVY DUTY stacks. (Order: LD for lead plating for HEAVY DUTY stack applications.)
6 TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GP114C GP1126 1/4 1/2 4 Sol. - 2/0 Str. 1-7/8 GP /2 GP644C 3/8 GP Sol. - 2/0 Str. 2-1/8 3/8 5/8-3/4 GP /8 GP /2 1/2 2-1/2 GP144C 2-3/4 GP Sol. - 2/0 Str /8 1/2-3/4 7/8-1 3 GP1429 3/0 Sol GP /4 1/2 2-3/4 GP164C 1-1/4 1-5/8 GP /2 3 GP /2 1-7/8 4 Sol. - 2/0 Str /4 GP184C 4-1/8 3/ /8 GP Sol. - 2/0 Str. 4-3/8 3-11/16 GP /2 4 Sol. - 2/0 Str. 5-1/2 4-13/16 GP /2 4 Sol. - 2/0 Str. 6-3/8 5-13/16 D-33 TYPE GK GROUND CONNECTOR For Three Copper Cables to Rod or Pipe High copper alloy ground connector for joining three equal cables to rod or tube. Cable grooves take a wide range of cable. High copper alloy cast body and DURIUM U-bolts, nuts, and lockwashers make the GK suitable for direct burial in soil or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GK114C 2-1/2 3/8 GK1126 1/4 1/2 4 Sol. - 2/0 Str. 2-1/2 2-3/4 GK1129 1/2 3-3/8 GK644C 2-5/8 3/8 GK Sol. - 2/0 Str. 2-7/8 3 3/8 5/8-3/4 GK /2 1/2 GK /2 4 GK Sol. - 2/0 Str. 2-3/ /4 GK1429 1/2-3/4 7/8-1 2 Sol /8 3-3/4 1/2 GK /8 GK Sol. - 2/0 Str. 3-3/8 3/8 3-1/ /8-1-1/4 GK /4 1/2 4-1/8 GK Sol. - 2/0 Str. 3-1/2 3/8 3-7/8 1-1/4 1-3/8-1-1/2 GK /4 1/2 4-1/2 GK Sol. - 2/0 Str. 4 3/8 4-1/8 1-1/2 1-5/8-1-7/8 GK /8 1/2 4-3/4 GK Sol. - 2/0 Str. 4-1/4 3/8 4-5/ /8 GK /8 1/2 5-1/8 GK Sol. - 2/0 Str. 5 3/8 5-1/8 2-1/2 2-1/2-2-7/8 GK /2 5-5/8
![[13] [69] [97] [69] C-4JPT 2-1/2-4 4.39 5.15 [64-102] [112] [131] GROUND CLAMPS For connecting grounding conductor to water pipe or copper tube.](/docs-images/95/124545536/images/7-1.jpg "\"D\" indicates UL467 Listed for direct burial in earth and concrete and are supplied with silicon bronze hardware. \"B\" indicates brass hardware.")
7 CLAMPS FOR CONDUIT Pressure bar type conduit hub adjusts for 1/2, 3/4 EMT or 1/2 rigid conduit. Hub swings 360 for easy alignment. Zinc plated hardware. D-34 REFERENCE DIMENSIONS CATALOG WATER HUB PIPE WIRE NUMBER PIPE GROUND SIZE H L W CLAMP CLAMP C-11JPT 1/ [13-25] [53] [81] C-22JPT 1-1/ / [32-51] Sol. [13] [69] [97] [69] C-4JPT 2-1/ [64-102] [112] [131] GROUND CLAMPS For connecting grounding conductor to water pipe or copper tube. "D" indicates UL467 Listed for direct burial in earth and concrete and are supplied with silicon bronze hardware. "B" indicates brass hardware. CATALOG WATER REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE REBAR GROUND H L W C CLAMP CLAMP C-11N 1/ C-11D #4 - #6 [13-25] Str. [46] [56] [16] [16] C-11B C / C-22D [32-51] Str. [60] [92] [19] [25] 2-1/ C-4 [64-114] Str. [105] [159] [24] [48] C-8 4-1/ [ ] Str. [109] [212] [32] [48] BUDGET PRICE GROUND CLAMP Similar to above but lighter duty. CATALOG WATER REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE REBAR GROUND H L W C CLAMP CLAMP C-5 1/ (JUNIOR) [13-25] Str. [40] [56] [14] [13]
8 GROUND CLAMPS With Lay-in Feature For connecting grounding conductor to water pipe, copper tube, ground rod or rebar. The open face design allows for fast lay-in of the tap conductor without the need for cutting. Simply reverse bottom clamp for smaller size rebar or rod. Connectors are provided with Silicon Bronze hardware. Fig. 1 Fig. 2 D-35 MAIN TAP REFERENCE CATALOG WATER GROUND DIMENSIONS NUMBER FIG # PIPE REBAR ROD GROUND H L W C11K16D Fig 1 1/2-1 #10 - #2 #4 - #6 3/8-1 C11K17D Fig 2 [13-25] Str in.-lbs. DIE CAST CLAMPS Die cast zinc with zinc plated screws. CATALOG WATER REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE GROUND H L W C CLAMP CLAMP CZ-11 1/ [13-25] Str. [40] [56] [14] [13]
![[66] [94] [36] C-4JA 2-1/2-4 4.29 5.01 [64-102] [109] [128] GROUND CLAMPS For connecting grounding conductor, EMT or rigid conduit to water pipe, copper tube, ground rod or rebar.](/docs-images/95/124545536/images/9-1.jpg "Hub swings 360 for easy alignment. Simply reverse bottom clamp for smaller size rebar or rod. Connectors are provided with Silicon Bronze hardware.")
9 CLAMPS To connect armored cable to water pipe. Zinc plated screws. Pressure bar grips armor or outer cable insulation. 360 swing hub for easy alignment. D-36 REFERENCE DIMENSIONS CATALOG WATER ARMORED PIPE WIRE NUMBER PIPE CONDUCTOR H L W CLAMP CLAMP C-11JA 1/ [13-25] [35] [77] C-22JA 1-1/ [32-51] Sol. [66] [94] [36] C-4JA 2-1/ [64-102] [109] [128] GROUND CLAMPS For connecting grounding conductor, EMT or rigid conduit to water pipe, copper tube, ground rod or rebar. Hub swings 360 for easy alignment. Simply reverse bottom clamp for smaller size rebar or rod. Connectors are provided with Silicon Bronze hardware. MAIN TAP REFERENCE CATALOG WATER GROUND DIMENSIONS NUMBER PIPE REBAR ROD GROUND H L W C11HD4/0DB 1/2-1 #8-4/0 #4 - #6 3/8-1 [13-25] AWG in.-lbs. C22HD4/0DB 1-1/4-2 #8-4/0 [32-51] AWG in.-lbs.
10 CLAMPS For connecting armored cable to water pipe. Zinc plated screws. "D" indicates UL467 for direct burial in earth and concrete, supplied with silicon bronze hardware. CATALOG WATER GROUND REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE GROUND CLAMP H L W C CLAMP CLAMP C-6 C-6D C-7 1/ Bare Armored [13-25] Str. Unarmored [41] [59] [27] [16] Wire Cables 1-1/ or Cords [32-51] Str. [60] [92] [24] [25] D-37
11 CLAMP FOR RIGID CONDUIT For grounding rigid conduit systems. Zinc plated screws. D-38 CATALOG WATER HUB REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE GROUND SIZE H L W C CLAMP CLAMP C-61 1/ [13-25] #6 Sol. 1/2 [53] [59] [34] [27] C /4-2 Max. [13] [32-51] [68] [92] [34] [36] CLAMPS FOR CONDUIT For grounding rigid conduit systems. Continuity from rigid conduit systems to ground provided by cast bronze threaded conduit hub. Zinc plated screws. CATALOG WATER HUB REFERENCE DIMENSIONS PIPE WIRE NUMBER PIPE GROUND SIZE H L W C CLAMP CLAMP C-11LH-1 1/ [13-25] [57] [83] [25] C-22LH-1 1-1/ Str. - 1/ [32-51] 6 Sol. [13] [73] [89] [18] [34] C-4LH-1 2-1/ [54-102] [116] [122] [62] C-11LH-2 1/ [13-25] [65] [73] [29] C-22LH-2 1-1/4-2 2/0-10 3/ [32-51] Str. [19] [65] [89] [25] [38] C-4LH-2 2-1/ [64-102] [124] [122] [60] C-11LH-3 1/ [13-25] [68] [73] [30] C-22LH-3 1-1/4-2 3/ [32-51] Str. [25] [59] [89] [29] [40] C-4LH-3 2-1/ [63-102] [127] [122] [62]
![1 1/2-1 4/0 Str. [19] 1.75 8.50 [32] [38] 6.12 50 in.-lb. 50 in.-lb. [13-25] Max. 1 [44] [216] 1.50 1.75 [155] C-11CSH-3 Fig. 1 [25] [38] [44] C11CSLH12 Fig. 2 #10-2/0 1/2 1.18 1.](/docs-images/95/124545536/images/12-4.jpg "06 AWG [13] [27] 45 in.-lb. D-39 GROUND STRAPS, ADJUSTABLE BURNDY adjustable ground straps are made from pure annealed copper. The heavy type is.050 thick and 3/4 wide. The light type is.")
12 CLAMP WITH COPPER STRAP For grounding rigid conduit systems. Strap helps protect conduit system from water system vibrations. Zinc plated screws. Strap ETP copper. Fig. 1 Fig. 2 CATALOG WATER HUB REFERENCE DIMENSIONS PIPE WIRE NUMBER FIG. # PIPE GROUND SIZE H L W C D CLAMP CLAMP C-11CSH-1 Fig. 1 6 Sol. 1/ Max. [13] [27] [27] 3/ C-11CSH-2 Fig. 1 1/2-1 4/0 Str. [19] [32] [38] in.-lb. 50 in.-lb. [13-25] Max. 1 [44] [216] [155] C-11CSH-3 Fig. 1 [25] [38] [44] C11CSLH12 Fig. 2 #10-2/0 1/ AWG [13] [27] 45 in.-lb. D-39 GROUND STRAPS, ADJUSTABLE BURNDY adjustable ground straps are made from pure annealed copper. The heavy type is.050 thick and 3/4 wide. The light type is.025 thick and 3/4 wide. The bolts, nuts and washers are plated steel. Four sizes cover a ground pipe range of 3/8 to 4. Ground wire connection can be soldered or solderless. CATALOG REFERENCE DIMENSIONS NUMBER WATER PIPE H L W GS1T /8-1 [1] 5.61 GS1T25 [10-25].025 [142] [1] GS2T /8-2 [1] 9.38 GS2T25 [10-51].025 [238] [1].75 GS3T [19] 3/8-3 [1] in.-lb. GS3T25 [10-76].025 [335] [1] GS4T /8-4 [1] GS4T25 [10-102].025 [432] [1]
13 D-40 TYPE GC-A DUAL RATED GROUND CLAMP For Copper and Aluminum Cable GC-A ground clamps are UL Listed for use with either copper or aluminum conductors to copper water pipe, galvanized pipe or steel conduit. All clamps are constructed from tin plated high-strength extruded aluminum alloy. PENETROX oxide inhibiting joint compounds are recommended for all aluminum applications. Features and Benefits Clamps are dual rated for both copper and aluminum conductors. Maximum flexibility of application. All connectors are tin plated. Provide low contact resistance and prevents galvanic corrosion. All clamps are range taking. Only 3 catalog numbers covers complete range of applications from 1/2-4 inches. Catalog Conduit, Pipe, or Wire Screw Hex Number Water Tube Size Range Type W L Size GC15A 1/2-3/4-1 1/0-14 Slotted 11/16 2-1/4 S GC18A 1-1/4-1-1/ MCM - 6 Hex Socket 13/16 3-3/4 5/16 GC22A 2-1/ / MCM - 6 Hex Socket 1 6-5/16 5/16
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
CTN QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473. Two-Hole NEMA CTN QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 2000 2002 998 999 2004 200 200 2005 200 2008 207 2007 2009 200 20
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
SUBMERSIBLE SECONDARY CONNECTORS
SUBMERSIBE SECONDARY CONNECTORS TYPE SSBC350- (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEA RUS Approved User friendly wide-port spacing (50% more room for cable training). Multiple
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Conduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
GC-08. Grounding Catalog. Experience. Technology. Answers. P R O D U C T S
GC-08 Grounding Catalog Experience. Technology. Answers. P R O D U C T S TABLE OF CONTENTS HYGROUND IRREVERSIBLE COMPRESSION GROUNDING AND INSTALLATION TOOLING HYGROUND Introduction and Installation...........
Bronze Grounding Connectors and Everdur Hardware TYPE GH. Ordering Information. or
TYPE G Ground Connector For Cable To Large Diameter Pipe A ground connector for connecting a cable or wire to a large diameter pipe, tubular column or fence post. Each connector size accommodates a wide
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Conductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DR20022 Cable Support Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category DR20022
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
Have You Been Grounded Lately
Have You Been Grounded Lately Thurs, Oct. 26, 2017 9:15-10:15 Phil Simmons Author, Electrical Grounding and Bonding Author Cengage Learning Phil Simmons Have You Been Grounded Lately 2017 NEC Changes Relative
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
Manufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
TABLE OF CONTENTS BURNDY. Hardware. DURIUM Hardware Bolts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers D-2 D-3 D-3 D-3 D-3
URNDY DURIUM olts Nuts Flat Washers Split Lockwashers Internal Tooth Lockwashers TALE OF CONTENTS D-2 D-1 Aluminum olts Nuts Flat Washers Split Lockwashers Galvanized Steel olts Nuts Flat Washers Internal
Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
Grounding Accessories
Accessories Eaton offers a variety of grounding which are sold individually or as a kit. Kits are available as one kit per rack, allowing for ease of stocking and reordering. Vertical rack ground bar kit
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Commercial Products. New Products in the Commercial Products Product Line
Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
Grounding Busbars. Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets.
LINE CARD Grounding Exothermic Lightning Protection Grounding Busbars Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets. 2 Grounding Busbars & Kits s GBI14210G
ARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
Easy-On II Terminations
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables, concentric neutral, metal tape shielded or wire shielded cables without need for additional
Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
B T T T 2.11 MY29-11 (1) 4/0 AWG - MY29-11 (1) W30VT (2) U30RT (2) 300 kcmil 150 W30VT (2) YA30L-2TC W30RT (2) U28ART (2)
URNDY TWO HOLE HYLUG CODE CONDUCTOR STANDARD ARREL (Continued) T T T Fig. 1 Fig. 2 Fig. 3 Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
BURNDY Compression. TWO HOLE HYLUG CODE CONDUCTOR STANDARD BARREL (Continued) Fig. 1 Fig. 2 Fig. 3. Conductor
URNDY TWO HOLE HYLUG CODE CONDUCTOR STANDARD ARREL (Continued) T T T Fig. 1 Fig. 2 Fig. 3 C-46 Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
TC-RHH/RHW-2 USE-2 Copper
TC-RHH/RHW-2 USE-2 Copper XLPE Insulated, PVC Jacketed, ER; 600 V Features Standards UL Listed as TC-ER - exposed run tray cable. Jacket is rated Sunlight Resistance, Oil Resistance I and Direct Burial.
Grounding Solutions for Data Center Applications
Grounding Solutions for Data Center Applications B D A A C E G F E Legend For Typical Grounding Application (layout on following page) A) B) C) D) E) F) G) Vertical Rack Ground Bar Kit (see page 4) Horizontal
25 Sign / Wall Lighter 4324 LED Series Extruded Aluminum, PicoPrism LED revision 9/9/15 kl_4324led_series_spec.pdf
Type: Catalog number: / / Wattage / Lamp(s) Finish Options: See page 2 ing Options: See pages 3-5: Approvals: Date: Page: 1 of 5 Specifications ORDERING INFORMATION Light Engine Length l 4324P70 / 16L3KUV
NATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
Thin Wall Conduit Fittings (For EMT Conduit)
Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without
Jumper Terminals and Tee Taps. delivery
Jumper Terminals and Tee Taps delivery November 017 November 017 Jumper Terminals & Tee Taps Index Compression/Aluminum JTS... Straight Pad for AAC, AAAC, ACAR & ACSR Conductor... -1 JTF... 15 Degree Pad
230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or
230 kv luminum 230 kv luminum TYPE 16300, 16500, 16700 Cable Support The 16300, 16500 and 16700 series supports are designed for mounting stranded aluminum or CSR conductors. New cable support reduces
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
Accessories, Splices and Connectors
10.137 Accessories, Splices and Connectors Splices and Connectors Pgs. 137-142 Misc. Accessories Pgs. 143 Ground Connectors Pg. 144 Separators Pgs 145 For more information or to order, call 1-800-277-4810
APJ Amp Pin & Sleeve Plug 3-W 4-P 250 VDC/600 Vac
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 APJ10487 100 Amp Pin & Sleeve Plug 3-W 4-P 250 VDC/600 Vac Cooper Crouse-Hinds Catalog Number Manufacturer Description
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
Electrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
Control Cable Type T/N 600/1000 volts DRILMAR 90 Polyvinyl Chloride/Nylon Insulated Drilling Rig and Marine Cable
PVC Jacket (overall optional) Armor (optional) PVC Jacket Color-coded PVC/Nylon Insulation Copper ed 600/00 volts Features Maximum conductor operating temperature: 90ºC per IEEE, UL, and CSA. Meets applicable
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
Series 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
PRODUCT SHEET. Elastimold advanced connection system (shear bolt)
PRODUCT SHEET Elastimold advanced connection system (shear bolt) 2 Elastimold cable accessories The Elastimold advanced connection system - shear bolt is the latest solution to be incorporated into the
Outdoor Power Transmission & Distribution
Description: The purpose of the section is to highlight the current applicable UMCP Design Standards and requirements for Outdoor Power Transmission and Distribution, including but not limited to the following:
Wire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
The Best Flexible Wire Replacement with ERIFLEX FLEXIBAR STANDARD and ERIFLEX FLEXIBAR SUMMUM
ERIFLEX FLEXIBAR The Best Flexible Wire Replacement with ERIFLEX FLEXIBAR STANDARD and ERIFLEX FLEXIBAR SUMMUM connections are made by punching directly through the laminates. No lugs to purchase, installation
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
SAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
DEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
Seismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
Pipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
Lightning Protection Equipment
LINE CARD Grounding Exothermic Lightning Protection Lightning Protection Equipment Manufacturing Engineering Services Training Typical Roof Lightning Protection Layout 8 6 1 4 Mounted Vertically (with
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
DISTRIBUTION CONNECTORS SECTION DF COMPRESSION TERMINALS. Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs
DISTRIBUTION CONNECTORS COMPRESSION TERMINALS Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs SECTION VERSAtile ALUMINUM COMPRESSION TERMINAL TYPE VCEL For use with either
CATENARY ACCESSORIES INSTRUCTIONS. Power Management. Quick Connect Voltage Separation Box AY-QCVSB. Sheet 5. Suspension Accessories
CATENARY ACCESSORIES INSTRUCTIONS Quick Connect Jumper Cord AY-QC7P6-X Sheet 2 Quick Connectors AY-QC7SET Sheet 3 3/32" Stainless Steel Cable AY-CBL3/32-50 Power Cord AY-P6-50 Power Cord Ties AY-WT-100
SECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
INSTALLATION MANUAL.
INSTALLATION MANUAL D6M_BxA Series : D6M_B1A / D6M_B2A / D6M_B3A / D6M_B5A D6M_AxA Series : D6M_A1A / D6M_A2A / D6M_A3A / D6M_A5A D6P_BxA Series : D6P_B1A / D6P_B2A / D6P_B3A / D6P_B5A D6P_AxA Series :
Standard wire insulation is glass over glass with a stainless steel overwrap. Dual and single element. MgO versions available. rubber outer jacket.
www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. T C P engine exhaust and compressor thermocouples are available in a variety of configurations to satisfy many different requirements. The standard
Cam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
PRODUCT BROCHURE. Elastimold advanced connection system (shear bolt)
PRODUCT BROCHURE Elastimold advanced connection system (shear bolt) 2 ELASTIMOLD ADVANCED CONNECTION SYSTEM (SHEAR BOLT) Elastimold cable accessories The Elastimold advanced connection system shear bolt
Wire Mesh Safety Grips
Pulling Grips PS Series S PS Series grips feature a double weave of galvanized steel strands for greater strength and added mesh contact with the cable. Leviton Double Weave Pulling Grips are designed
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
CONTENTS. This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark:
This Product is Listed by UNDERWRITERS LABORATORIES INC. and Bears the Mark: This Product is Certified by CANADIAN STANDARDS ASSOCIATION and Bears the Mark: SLATER SCD Installation Instructions For Self-Contained