Ford Brass Saddles Style 101B and 202B
|
|
|
- Harry Waters
- 6 years ago
- Views:
Transcription
1 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA, or BSP. Nuts - 5/8" brass alloy as per ASTM B62, ASTM B584 and AW WA C800 with integral washers. One side of the saddle body has a closed bolt lug for easy installation. Strap - 5/8" high quality silicon bronze flattened to provide a wider bearing surface against pipe. Gasket - EPDM rubber ASTM D0 202B Nuts - 5/8" brass alloy as per ASTM B62, ASTM B584 and AW WA C800 with integral washers. One side of saddle body has closed bolt lugs for easy installation. Body brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA, or BSP. Straps - 5/8" high quality silicon bronze flattened to provide a wider bearing surface against pipe. Gasket - EPDM rubber ASTM-D0 OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP7 AA-19
2 Ford Brass Saddles s 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Ford s single strap 101B, and double strap 202B, brass saddles are designed with built-in flexibility to cover asbestos-cement and/ or cast iron size pipe. The body of the saddle is sized to fit class asbestos-cement but will bend during installation to conform to the smaller size cast iron or ductile iron material. This eliminates double inventory and guess work when going to the job site. The body and the nuts of Ford brass saddles are cast from certified water works brass conforming to the AW WA C800 standard. The straps are high-quality silicon bronze flattened to provide a wide bearing surface against the pipe. The large EPDM rubber gasket is grooved to conform to the pipe surface and bonded in place for easy installation. Ford s convenient marking system quickly and easily identifies the type of thread in the boss. For AW WA tapered thread, the boss has a machined groove around the top outside edge while the boss for iron pipe thread is smooth. 101B Single Strap Brass Saddles For 3/4" and 1" Taps RANGE APPROX. STD. WT. PKG. RANGE LBS. QTY. 4" B-540-Tap " B-750-Tap " B-962-Tap " B-1212-Tap " B-1438-Tap To Order: Add tap code number from the table at the bottom of page 19 to the catalog number. For example, a saddle for 6" cast iron pipe with a 3/4" CC tap would be 101B-750-CC3. A saddle for 8" cast iron pipe with 1" iron pipe tap would be a 101B-962-IP4. 202B Double Strap Brass Saddles For 3/4" through 2" Taps APPROX. WT. LBS. 3/4" & 1" TAPS STD. PKG. QTY. APPROX. WT. LBS. 1-1/2" TAP STD. PKG. QTY. APPROX. WT. LBS. 2" TAP STD. PKG. QTY B-540-Tap N/A N/A 4" B-510-Tap N/A N/A N/A N/A B-540-Tap N/A N/A N/A N/A " B-750-Tap " B-962-Tap " B-1212-Tap " B-1438-Tap " B-1625-Tap B-1725-Tap " B-1840-Tap B-1925-Tap " B-2050-Tap " B-2220-Tap B-2350-Tap " B-2480-Tap B-2650-Tap " B-3274-Tap Please Note: 4" saddles with 2" taps have limited range as listed above, i.e and All other tap sizes have a standard range of To Order: Add tap code from the table at the bottom of page 19 to the catalog number. For example, a saddle for 12" cast iron pipe with 1" CC tap would be 202B-1438-CC4. AA-20
3 Ford Brass Saddles s 101BS and 202BS With Stainless Steel Band and Bolts for PVC Pipe for 3/4" through 2" Taps 101BS Nuts and Washers - 5/8" coated heavy hex nuts and washers made from 18-8 type 304 stainless steel. Specifications Body brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA, or BSP. One side of the saddle body has a closed bolt lug for easy installation. Gasket - EPDM rubber ASTM-D0. Band and Bolts - Wide band and 5/8" UNC threaded bolts of 18-8 type 304 stainless steel. Welds are fully passivated for corrosion resistance. 2" minimum width. 202BS Body brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA, or BSP. Nuts and Washers - 5/8" coated heavy hex nuts and washers made from 18-8 type 304 stainless steel. One side of the saddle body has closed bolt lugs for easy installation. Band and Bolts - Wide band and 5/8" UNC threaded bolts of 18-8 type 304 stainless steel. Welds are fully passivated for corrosion resistance. 3-1/4" minimum width. Gasket - EPDM rubber ASTM-D0. OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP7 AA-21
4 Ford Brass Saddles s 101BS and 202BS With Stainless Steel Band and Bolts for PVC Pipe for 3/4" through 2" Taps The 101BS and 202BS style service saddles incorporate stainless steel bands in place of the standard silicon bronze straps. This combination of brass and stainless provides the perfect answer for strength and flexibility. The stainless easily conforms to the surface of PVC pipe and the brass provides the required strength to support service lines. The 101BS and 202BS style saddles are ideally suited for tapping C900 PVC pipe. These saddles conform to the recommendation of Uni-Bell and AW WA. 101BS Single Band Saddles for C900 PVC Pipe For 3/4" and 1" Taps To Order: Add tap code from the table at the bottom of page 21 to catalog number. Example: A saddle for 12" C900 PVC with 1" CC tap would be 101BS-1320-CC4. AA-22 APPROX. STD. WT. PKG. LBS. QTY. 4" BS-480-Tap " BS-690-Tap " BS-905-Tap " BS-1110-Tap " BS-1320-Tap BS Double Band Saddles for C900 PVC For 3/4" and 2" Taps Steel Size PVC For 3/4" and 1" Taps To Order: Add tap code from the table at the bottom of page 21 to catalog number. Example: A saddle for 12" C900 PVC with 1" CC tap would be 202BS-1320-CC4. APPROX. STD. APPROX. STD. WT. LBS. PKG. WT. LBS. PKG. 3/4" & 1" TAPS QTY. 1-1/2" & 2" TAPS QTY. 4" BS-480-Tap " BS-663-Tap N/A BS-690-Tap " BS-863-Tap N/A BS-905-Tap " BS-1075-Tap NA BS-1110-Tap " BS-1275-Tap N/A BS-1320-Tap " BS-1530-Tap " BS-1740-Tap " BS-1950-Tap " BS-2160-Tap " BS-2580-Tap " BS-3-Tap BS Double Band Brass Saddles For 3/4" through 2" Taps To Order: Add tap code from the table at the bottom of page 21 to the catalog number. For example, a saddle for 20" cast iron pipe with 1" CC tap would be 202BS-2220-CC4. 14" 16" APPROX. STD. APPROX. STD. WT. LBS. PKG. WT. LBS. PKG. RANGE 3/4" & 1" TAPS QTY. 1-1/2" & 2" TAPS QTY BS-1625-Tap BS-1725-Tap BS-1840-Tap BS-1925-Tap " BS-2050-Tap " BS-2220-Tap BS-2350-Tap " BS-2480-Tap BS-2650-Tap " BS-3274-Tap
5 Ford Ductile Iron Service Saddles s F101, FS101 and FC101 s F202, FS202 and FC202 Ford Ductile Iron Service Saddles have a wide range and are designed for use on asbestos-cement, cast or ductile iron, and PVC pipe. They offer a simple, yet satisfactory, means of tapping water main pipe. The FS and FC s are recommended for use in highly corrosive areas and the stainless steel bands are especially recommended for use on PVC. Ford FS and FC Saddles should be pre-sized when used on C900 PVC pipe. Pre-sized saddles will conform to the pipe without placing undue stress on the PVC pipe. The Ford Meter Box Company endorses full compliance with the standard tapping practices and recommended material requirements for tapping PVC pipe outlined in the Uni-Bell Handbook of PVC Pipe and the AW WA Manual M23. One side of the saddle has closed lugs to allow pre-assembly of the saddle straps to facilitate installation. The heavy-duty outlet gasket maintains a positive seal in excess of the pipe rating. F101 and F202 Body - High strength ductile iron per ASTM A536. Finish - Black E-coating. Threads - CC or FIP per AW WA C800 or BSP. Specifications Bolt Lugs - One side of the saddle body has closed bolt lugs for easy installation. F202 Heavy Hex Nuts and Washers - 1/2" or 5/8" AISI steel alloy, zinc plated, with dichromate seal. Straps - 5/8" AISI C1010 steel, zinc plated with trivalent seal. Each strap has 5/8" flat bearing surface. 1/2" straps are furnished on saddles 3" and smaller. Gasket - EPDM rubber ASTM-D0. FS101 and FS202 Finish - Black E-coating. Nuts and Washers type 304 stainless steel. 1/2" or 5/8" heavy hex nuts and washers are coated to prevent galling. FC101 and FC202 Finish - Approximately 12 mils of fusion applied epoxy coating. FS202 Gaskets - EPDM rubber ASTM D0. FC /4" minimum width (FS202) Band and Bolts - Wide band and 5/8" UNC threaded bolts of 18-8 type 304 stainless steel. 1/2" bolts are furnished on saddles 3" and smaller. Welds are fully passivated for corrosion resistance. 2" minimum width (FC101) AA-23
6 Ford Ductile Iron Service Saddles s F101, FS101 and FC101 Single Strap for 3/4" and 1" Taps F101 Standard Strap FS101 (with Stainless Steel Band and Bolts) FC101 (Epoxy Coated with Stainless Steel Band and Bolts) To Order: Select the catalog number for the desired pipe range and complete catalog number by adding the tap code from the table at the bottom of the page. Example: A standard single strap saddle for 6.90 ductile iron pipe with a 3/4" CC thread would be F CC3. STD. APPROX. PKG. WT. RANGE STANDARD STRAP STAINLESS BAND EPOXY COATED QTY. LBS. 2" F Tap FS Tap FC Tap /2" F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap * FS Tap * FC Tap F Tap FS Tap FC Tap " F Tap * FS Tap * FC Tap F Tap FS Tap FC Tap F Tap * FS Tap * FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap AA-24 FS101 and FC101 Saddles Sized for C900 PVC To Order: Select the catalog number for the desired pipe and complete the catalog number by adding the tap code. Example: An FS101 style saddle for 12" C900 PVC with a 3/4" CC thread tap would be FS CC3 STD. APPROX. PKG. WT. STAINLESS BAND EPOXY COATED QTY. LBS. 4" 4.80 *FS Tap *FC Tap " 6.90 *FS Tap *FC Tap " 9.05 *FS Tap *FC Tap " FS Tap FC Tap " FS Tap FC Tap * These saddles are available with 1-1/4", 1-1/2", and 2" taps. OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/4" CC CC5 1-1/4" IP IP5 1-1/4" BSP BSP5 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP7
7 Ford Ductile Iron Service Saddles s F202, FS202 and FC202 Double Strap Saddles for 3/4" through 2-1/2" Taps Ford Double Strap or Band saddles are recommended for larger taps and for use on larger pipe. Double strap saddles equalize the pressure on the pipe and can be used on asbestos-cement, cast or ductile iron pipe. The FS and FC styles are recommended for use in highly corrosive areas and the stainless steel bands are especially recommended for use on PVC pipe. Ford s FS and FC saddles should be pre-sized when used on PVC pipe. Pre-sized saddles will conform to the pipe without placing undue stress on the PVC pipe. A separate listing of FS202 and FC202 saddles sized for C900 PVC is shown on page 26. The Ford Meter Box Company endorses full compliance with the standard tapping practices and recommended material requirements for tapping PVC pipe outlined in Uni-Bell Handbook of PVC Pipe and AW WA Manual M23. The open and closed lug design allows pre-assembly of the straps, thus ensuring a safe yet simple installation. The heavy duty gasket assures the saddle will maintain pressure in excess of the pipe rating. F202 FS202 FC202 Standard Straps Stainless Band Stainless Band & Epoxy Coated To Order: Select the catalog number below for the desired pipe range and complete the catalog number by adding the outlet thread tap code from the bottom of page 26. Example: A standard double strap saddle for 6.90 ductile iron pipe with a 2" CC thread tap would be F CC7. RANGE STANDARD STRAP STAINLESS BAND EPOXY COATED PKG. QTY. 3/4" & 1" TAPS PKG. QTY. 1-1/4" - 2-1/2" TAPS APPROX. WT. LBS. 2" F Tap FS Tap FC Tap /2" F Tap FS Tap FC Tap " * F Tap FS Tap FC Tap 6 *6 4.8 * F Tap FS Tap FC Tap 6 *6 5.5 * F Tap FS Tap FC Tap 6 *6 5.4 ** F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap F Tap FS Tap FC Tap " ** F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap F Tap FS Tap FC Tap " F Tap FS Tap FC Tap * Saddles for this pipe range are not available with 2" CC or 2-1/2" IP threads. ** These saddles with 1-1/4" - 2-1/2" taps fit the top of the listed range only. Example: F CC7 fits 13.20" pipe only. This saddle with 2" CC or 2-1/2" IP fits 9.05" pipe only. This saddle is only available with 2" CC (CC7) or 2-1/2" IP (IP8) taps. Note: The table of outlet thread tap codes for double strap saddles is at the bottom of page 26. AA-25
8 Ford Ductile Iron Service Saddles s FS202 and FC202 For C900/C905 PVC Stainless Steel Double Band Saddles for 3/4" through 2-1/2" Taps FS202 FC202 Stainless Band Stainless Band & Epoxy Coated FS202 and FC202 Saddles Sized for C900/C905 PVC To Order: Select the catalog number for the desired pipe and complete the catalog number by adding the outlet thread tap code. Example: An FS202 style saddle for 12" C900 PVC with a 2" CC thread would be FS CC7. PKG. QTY PKG. QTY. APPROX. 3/4" & 1" 1-1/4" - 2-1/2" WT. STAINLESS STEEL EPOXY COATED TAPS TAPS LBS. 4" 4.80 FS Tap FC Tap " 6.90 FS Tap FC Tap " 9.05 FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS Tap FC Tap " FS202-3-Tap FC202-3-Tap OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/4" CC CC5 1-1/4" IP IP5 1-1/4" BSP BSP5 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP /2" IP8 - - AA-26
9 Ford Ductile Iron Service Saddles s FSD202 and FCD202 Stainless Steel Dual Band Saddles for 3/4" through 2-1/2" Taps FSD202 FCD202 Stainless Band Stainless Band & Epoxy Coated FSD202 and FCD202 Dual Band Saddles (with Dual Stainless Steel Band and Bolts) CTN. QTY CTN. QTY. APPROX. 3/4" & 1" 1-1/4" - 2-1/2" WT. STAINLESS STEEL EPOXY COATED TAPS TAPS LBS. 2" FSD Tap FCD Tap /2" FSD Tap FCD Tap " * FSD Tap FCD Tap * FSD Tap FCD Tap * FSD Tap FCD Tap ** FSD Tap FCD Tap " FSD Tap FCD Tap * FSD Tap FCD Tap FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap FSD Tap FCD Tap " ** FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap FSD Tap FCD Tap " FSD Tap FCD Tap * Saddles for this pipe range are not available with 2" CC (CC7) or 2-1/2" IP (IP8) threads. ** These saddles with 1-1/4" through 2-1/2" taps fit the top of the listed range only. Example: FSD CC7 fits 13.20" pipe only. This saddle is only available with 2" CC (CC7) or 2-1/2" IP (IP8) taps. OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/4" CC CC5 1-1/4" IP IP5 1-1/4" BSP BSP5 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP /2" IP8 - - AA-27
10 Fabricated Steel Saddles s FS202 and F202 For 3" and 4" Taps Ford Fabricated Steel Saddles are specifically designed and manufactured for applications requiring a 3" and 4" iron pipe service tap. These products are available with an 18-8 type 304 stainless steel band or with zinc plated C1010 steel straps. Ford Fabricated Steel Saddles have a psi working pressure rating, dependent upon the use of industry standard support and backfill practices. Ford recommends special fabricated FTS tapping sleeves for air release or vacuum valve applications above psi. Contact Ford Meter Box customer service for more information. Specifications FS202 Threads - FIP Finish - Black shop coat. Body - Fabricated steel. (7" wide) Heavy Hex Nuts and Washers type 304 stainless steel. Heavy hex nuts and washers are coated to prevent galling. Outlet Gasket - Buna-N (NBR) rubber ASTM-D0. Band type 304 stainless steel is passivated to restore stainless characteristics. F202 Threads - FIP Finish - Black shop coat. Body - Fabricated steel. Electro-Galvanized Heavy 5/8" Hex Nuts and Washers - zinc plated. Outlet Gasket - Buna-N (NBR) rubber ASTM-D0. Straps - 5/8" AISI C1010 steel, zinc plated with dichromate seal. AA-28
11 Fabricated Steel Saddles s FS202 and F202 For 3" and 4" Taps 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" ACTUAL STAINLESS BAND STEEL STRAPS APPROX. TAP CTN. WT. QTY. LBS " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS202-0-IP9 F202-0-IP " FS202-0-IP11 F202-0-IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS202-1-IP9 F202-1-IP " FS202-1-IP11 F202-1-IP " FS IP9 F IP " FS IP11 F IP " FS IP9 F IP " FS IP11 F IP " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS202-0-IP9 N/A " FS202-0-IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS IP9 N/A " FS IP11 N/A " FS202-3-IP9 N/A " FS202-3-IP11 N/A AA-29
12 Ford Stainless Steel Saddles FS303 For 3/4" through 2" Taps Primarily for use on Standard or C900 PVC Pipe or for applications in a corrosive environment. Specifications Stainless Steel Bolts and Nuts type 304 stainless steel bolts. Heavy hex nuts are coated to prevent galling. Stainless Steel Lifter Bar Stainless Band - Heavy gauge 18-8 type 304 stainless steel. Stainless steel saddles are fully passivated to restore stainless characteristics. Washers - Special Nylatron GS* washers are also provided for added lubrication. Gasket - Buna-N (NBR) per ASTM D0. 4", 6", 8", 10" and 12" with 3/4" and 1" taps have a coined body with a recessed O-ring. To order these sizes with a flush body and tapered gasket add -OS after the OD in the catalog number. Example: FS OS-CC4. All other saddle sizes and taps have a tapered pad gasket as shown below. Coined body with recessed O-ring pictured above. Stainless Taps type 304 stainless steel TIG welded to band. Available with AW WA, FIP, or BSP threads 3/4" through 2". Pressure Rating - The Ford FS303 is rated for psi working water pressure. Tapered pad gasket ( OS ) *Nylatron GS is a registered trademark of the Polymer Corporation. AA-30
13 Ford Stainless Steel Saddles FS303 For 3/4" through 2" Taps To Order: Add tap code to catalog number. For example: A saddle for 8" PVC with a 1" CC tap would be FS CC4. BAND WIDTH APPROX. WT. LBS. BOLT BOLT NO. OF BY TAP RANGE QTY. SECTIONS 3/4" & 1" 1-1/4" - 2" 3/4" & 1" 1-1/4" - 2" 2" 2.38 FS Tap 1/2" 1 4" /2" 2.88 FS Tap 1/2" 1 4" " 3.50 FS Tap 1/2" 1 4" " FS Tap 1/2" 2 6" 7-1/2" FS Tap 5/8" 2 6" 7-1/2" " 5.56 FS Tap 5/8" 2 6" 7-1/2" " FS Tap 5/8" 2 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 2 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 2 6" 7-1/2" FS323-1-Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 2 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" " FS Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 4 6" 7-1/2" FS323-0-Tap 5/8" 4 6" 7-1/2" FS Tap 5/8" 6 6" 7-1/2" " FS Tap 5/8" 6 6" 7-1/2" FS Tap 5/8" 6 6" 7-1/2" FS Tap 5//8" 6 6" 7-1/2" " FS Tap 5/8" 6 6" 7-1/2" FS Tap 5/8" 6 6" 7-1/2" FS Tap 5/8" 6 6" 7-1/2" " FS Tap 5/8" 6 6" 7-1/2" FS Tap 5/8" 6 6" 7-1/2" Other sizes and ranges available. Contact factory for details. OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/4" CC CC5 1-1/4" IP IP5 1-1/4" BSP BSP5 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP7 AA-31
14 Ford Repair Saddles FRS202 Double Band Specifications Body - 7-1/2" wide, 18-8 type 304 stainless steel for corrosion control. All welds are fully passivated to restore stainless steel characteristics. Outlet type 304 stainless steel available in 3/4" through 2" FIP, AW WA or BSP threads. Bolts and Nuts type 304 stainless steel 5/8" UNC threads. Heavy hex nuts are coated to prevent galling. Special Nylatron GS* washers are also provided for added lubrication. Gasket - Tapered Buna-N with circular grid as per ASTM D0. Lifter Bar type 304 stainless steel provides a heavy bearing surface for nuts. *Nylatron GS is a registered trademark of the Polymer Corporation. Pressure Rating - The Ford FRS Stainless Steel Repair Saddle is rated for PSI working water pressure Confirm the leak location by cleaning and examining pipe. Shut off the water supply and remove the corporation stop from the pipe. Install the corporation stop into the saddle and position loosely on the pipe next to the hole. Center the saddle over the damaged pipe hole and tighten the saddle onto the pipe. To Order: Add tap code number to catalog number. For example: A repair saddle for use on 9.05 iron pipe with a 2" CC tap would be FRS CC7. AA-32 RANGE APPROX. WT. LBS. QUANTITY BAND WIDTH 4" FRS Tap " 6" FRS Tap " 8" FRS Tap " 10" FRS Tap " FRS Tap " 12" FRS Tap " FRS Tap " 14" FRS Tap 2 2" 16" FRS Tap 2 2" 18" FRS202-0-Tap 1 7" 20" FRS Tap 1 7" 24" FRS Tap 1 7" FRS Tap 1 7" OUTLET THREAD TAP CODE CC (AWWA) THREAD FIP THREAD BSP THREAD THREAD CODE THREAD CODE THREAD CODE 3/4" CC CC3 3/4" IP IP3 3/4" BSP BSP3 1" CC CC4 1" IP IP4 1" BSP BSP4 1-1/4" CC CC5 1-1/4" IP IP5 1-1/4" BSP BSP5 1-1/2" CC CC6 1-1/2" IP IP6 1-1/2" BSP BSP6 2" CC CC7 2" IP IP7 2" BSP BSP7
15 Chart PVC (STEEL ) PVC C900 PIT CAST IRON ASBESTOS-CEMENT STEEL CLASSES SPUN CLASS MACHINED Note: Due to variations in outside diameters and specifications, dimensions listed above are approximate. For this reason, determine the exact pipe before ordering Ford Pipe Repair Products, Tapping Sleeves and Saddles. END ROUGH BARREL MIN - MAX 1/2".84 STD..84 3/4" 1.05 STD " 1.32 STD /4" 1.66 STD /2" 1.90 STD " STD /2" 2.88 STD " 3.50 A B, TYPE STD. 3-1/2" STD A " B, STD /2" STD " STD A " B, STD E, F " STD " E, F STD " STD " E, F STD " " 16" 18" 20" E, F E, F E, F STD STD STD " STD " STD AA-33
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
TAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
ALPHA Wide Range Restrained Joint
ROMAC INDUSTRIES, INC. 1-800-426-9341 www.romac.com MADE IN U.S.A. January 8, 2015 ALPHA Wide Range Restrained Joint WIDE RANGE RESTRAINED JOINT Wide covers DI through IPS PVC pipe diameters without having
Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010
Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE
Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,
Clampette Products NEW YORK TEXAS CALIFORNIA
Clampette Products NEW YORK TEXAS CALIFORNIA Standing For Quality For Over 45 Years MADE IN THE U.S.A. Clampette is a major United States manufacturer of stainless steel pipe repair products. We take great
Pipe Repair Products. A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
Clampette Products Global sourcing. National compliance. Local service.
Clampette Products C a l i f o r n i a T e x a s N e w Y o r k Patch Clamps Clampette is a United States manufacturer of stainless steel pipe repair clamps. We take great pride in the manufacturing and
SERVICE SADDLES & Cambridge Brass Inc. 140 Orion Place, Cambridge, Ontario, N1R 5V1, Canada
SERVICE SADDLES & TeCK TM Repair Clamps Cambridge Brass Inc. 140 Orion Place, Cambridge, Ontario, N1R 5V1, Canada www.cambridgebrass.com 2014 Cambridge Brass Inc. FEBRUARY2014 CAMB2014 TABLE OF CONTENTS
Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits
622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
Smith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
The Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
Section M. 04/2014 Web Revision 10/02/2015. Ford Bolted Flex Couplings
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section M 04/2014 Web Revision 10/02/2015 Ford Bolted Flex Couplings Contents Coupling Numbering System... 3 Features of Ford Cast Couplings, Style
Section M. 06/2017 Web Revision 12/15/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Cast Couplings and Adapters
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section M 06/2017 Web Revision 12/15/2017 Ford Cast Couplings and Adapters Contents Page Coupling Numbering System.... 3 Features
315 & 317 TaperSeal Service Saddles Ductile Iron Body with Stainless Steel Straps ANSI/NSF 61 Listed
& TaperSeal Service Saddles Ductile Iron Body with Stainless Steel Straps ANSI/NSF Listed Protection Against Corrosion SmithBlair Engineers have taken the industry leading service saddle, the SmithBlair
JCM 101 Universal Clamp Couplings
JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of
PIPE REPAIR PRODUCTS REPAIR CLAMPS
PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
NEW FROM JCM INDUSTRIES MODEL 161 FABRICATED LUG ALL STAINLESS STEEL CLAMP
JCM 161 FABRICATED LUG ALL STAINLESS NEW FROM JCM INDUSTRIES MODEL 161 FABRICATED LUG ALL STAINLESS STEEL The new JCM 161 Fabricated Lug All Stainless Steel Clamp offers an economical solution to problems
Section 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
K81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
K81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
HYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
ROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
Polyvalve TM Black Label TM Pipe Repair Clamps
Polyvalve TM Pipe Repair Clamps Pipe Repair Clamps - FLOWSERVE POLYVALVES S.A.S. repair clamps are flexible clamps, made out of one or several stainless steel bands with lugs. Bolts and nuts mounted on
SWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
Wide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
Joint Restraint Products PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is a unique product with
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
H D CONTENTS HDPE-1. July, 2017 HDPE
CONTENTS July, 2017 PROUCTS FOR...2 FASTP ALL STAINLESS STEEL TAPPING SLEEVE...3 FTSSP ALL STAINLESS STEEL TAPPING SLEEVE...4 FTSP AN FTSCP STEEL TAPPING SLEEVES...5 MECANICAL JOINT AAPTER OUTLET...6 FCP202
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
411 Steel Couplings Material Specifications
411 Steel Couplings Material Specifications Gasket Material Specifications STANDARD: Nitrile (Buna-N)-NSF 61 Compounded to produce superior storage and performance characteristics while resisting water,
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
MODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
Service Materials. Service Materials. With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY (607)
Service Materials Service Materials Rochester, NY 785 Beahan Rd. Rochester, NY 14624 (585) 436-9624 With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY 14809 (607) 566-2214 Watertown,
REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
UNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
SECTION SWING CHECK VALVES
PART 1 GENERAL 1.1 DESCRIPTION This section includes materials, testing, and installation of swing check valves as shown in the Drawings and specified herein, in accordance with the requirements of the
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV (304) STANDARDS AND SPECIFICATIONS
JEFFERSON UTILITIES 270 INDUSTRIAL BLVD. KEARNEYSVILLE, WV 25430 (304) 728-2077 STANDARDS AND SPECIFICATIONS FEBRUARY 28, 2018 1 TABLE OF CONTENTS GENERAL MATERIAL... 3 WATER... 5 DUCTILE IRON PIPE...
SOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
FLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
PRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
FIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
HYMAX GRIP by Krausz Restraint Solutions
HYMAX GRIP by Krausz Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. Krausz restraint products combine
PRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
The SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and FM Approved in applicable configurations. ONE-PIECE
Terms and Conditions of Sale
Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
GROUND JOINT FITTINGS
GROUND JOINT FITTINGS Ground joint fittings are for heavy-duty applications such as steam, air supply for construction, roadbuilding, and drilling applications. The coarse threads make G29 couplings easy
Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
ALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
HYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
FIRE HYDRANTS. Wet Barrel Fire Hydrants
FIRE HYDRANTS Wet Barrel Fire Hydrants Jones Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company is the innovator in the
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
PIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
September 2012 / M&H C502 / Model 129
GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line
DENSITY POLYETHYLENE PIPE
Effective January 15, 2016 Replaces 9/2/10 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
Harlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
SECTION 8 Fire Protection
Bronze Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company, LLC is the innovator in the bronze wet barrel hydrant industry.
Data Sheet Issue A
General Description The Rapidrop Fig 601/602 dry barrel post / flushing fire hydrant is designed to be a trouble free, easy to maintain hydrant. The Fig 601/602 fire hydrant is rated for a working pressure
Mueller 300 Ball Valves Industry-leading 300psi low lead ball valves
Mueller 300 Ball Valves Industry-leading 300psi low lead ball valves Mueller 300 Ball Valves Your assurance of quality, dependable ball valves The ball valve designed for 300 psig working pressure Before
Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
CNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service.
KENNEDY KENNEDY VALVE MODEL VALVE KS-RW 1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. 2. The valves shall have a cast
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
Approved. Vendor List
APPENDIX A Approved Vendor List Product Manufacturer Valves and Accessories Air Release Valves ARV Enclosures Gate Valves Gate Valves Tapping Valves Insert Valve ARI ARI D 040 2" only ARI D 040 2" only