Lightning Protection Equipment
|
|
|
- Philomena Turner
- 6 years ago
- Views:
Transcription
1 LINE CARD Grounding Exothermic Lightning Protection Lightning Protection Equipment Manufacturing Engineering Services Training
2 Typical Roof Lightning Protection Layout Mounted Vertically (with fasteners on parapet) 17 Air Terminal Brace 16 Ground Rod and 305 Ground Rod Clamp 15 M1, Structural Sealant Mounted Horizontally (with adhesive on roof) Mounted Horizontally (on mechanicals) Bonding Plates Air Terminal Pipe Railing Base 216BM 2 5 Main Lightning Protection Conductor 6 Pre-formed Cable Clip 7 Adhesive Cable Holder 8 1 Bolt Parallel Cable Connector 9 Bi-Metal 1 Bolt Cable Connector 10 Bi-Metal Connector 11 Thru-Roof Assembly 12 Pipe Clamp (Vent Bond) 13 A222 Bonding Lugs
3 1 thru 4 - Copper Air Terminals Diameter Length Class 3812CUAT 3/8 12 I 3824CUAT 3/8 24 I 3836CUAT 3/8 36 I 3848CUAT 3/8 48 I 1212CUAT 1/2 12 II 1224CUAT 1/2 24 II 1236CUAT 1/2 36 II 1248CUAT 1/2 48 II 5812CUAT 5/8 12 II 5824CUAT 5/8 24 II 5836CUAT 5/8 36 II 5848CUAT 5/8 48 II 1 thru 4 - Aluminum Air Terminals Diameter Length Class 1212ALAT 1/2 12 I 1224ALAT 1/2 24 I 1236ALAT 1/2 36 I 1248ALAT 1/2 48 I 5812ALAT 5/8 12 II 5824ALAT 5/8 24 II 5836ALAT 5/8 36 II 5848ALAT 5/8 48 II For nickel or tin plated air terminals add suffix N for nickel and suffix T for tin. Other air terminal sizes available. Please contact factory. 4 - Pipe Railing Bases Air Terminal Diameter CPRB1.5/2AT38* ETPB** 3/8 CPRB1.5/2AT12* ETPB** 1/2 CPRB1.5/2AT58* ETPB** 5/8 APRB1.5/2AT12* Aluminum 1/2 APRB1.5/2AT58* Aluminum 5/8 * Nominal pipe size range **Electro Tin Plated Bronze Fits all main size conductors up to 9/16 diameter. Other sizes available. Please contact factory. 5 - Class I - Copper Conductors s 29-50COIL AWG AWG AWG 250 Approximate diameter 3/8 and 72,500 x-sectional area. Electro Tin Plated conductors also available. 5 - Class II - Copper Conductors s 28-50COIL 28 AWG AWG AWG 250 Approximate diameter is 1/2 and 115,000 x-sectional area. Electro Tin Plated conductor also available. 1 thru 3 - Air Terminal Bases Internally Threaded Hub Diameter CUBU38I Copper 3/8 CUBU12I Copper 1/2 CUBU58I Copper 5/8 AUBU12I Aluminum 1/2 AUBU58I Aluminum 5/8 Add prefix T for elctro-tin plated copper base. Accepts # bonding conductor up thru Class II main lightning conductor. s 5 - Class I - Aluminum Conductors A24-50COIL 24 AWG 50 A AWG 100 A AWG 250 Approximate diameter is 7/16 and 98,600 x-sectional area. A37R (rope lay) 5 - Class II - Aluminum Conductors s A37R-50COIL AWG 50 A37R AWG 100 A37R AWG 250 Approximate diameter is 19/32 and 98,600 x-sectional area.
4 6 - Cable Clips Fits Lightning Conductors Fits Grounding Conductors ACC2 Aluminum A28 & A24 N/A ACC4 Aluminum A37R N/A CCC1 Copper # 2 Str., 4 Str., 2 Sol. CCC2 Copper 29 & 32 1/0 Str. & 2/0 Str. CCC3 Copper 28 & 24 4/0 Electro Tin Plated clips also available. 7 - Cable Holders 262 Copper A262 Aluminum For use with all cables thru 4/0 or up to 9/16 diameter. Electro Tin Plated copper holders also available Bi-Metal Connector Class 211R Bi-Metal II Brass side accepts all main size conductors up to 17/32 diameter. Aluminum side accepts all main size conductors up to 19/32 diameter Thru-Roof Assemblies Description Riser Length SSTRCC15812 Vertical, 12 SSTRCC15824 Stainless Steel 24 SSTRACBM15812 Vertical, Stainless 12 SSTRACBM15824 Steel, Bi-Metal 24 Other sizes available. Please contact factory. 8-1 Bolt Parallel Connectors Class B1BC Copper II A1BC Aluminum II TB1BC ETPB* II Accepts all main size conductors up to 5/8 diameter Pipe Clamps CPC* APC* Copper Aluminum Conductor range #6 Solid thru 250 MCM. Pipe outside diameter range.375 to * 6 clamps fit these pipe sizes. A BM 9 - Bi-Metal 1 Bolt Parallel Connector Class BM1BC Bi-Metal II 2 x 1-1/2 bi-metal connector allows splicing of aluminum conductors to copper conductors Bonding Lugs 2 Copper A2 Aluminum 216BM Bi-Metal 222 Copper A222 Aluminum
5 217 - Bonding Plate Class 217 ETPB* II 223 Copper II 223 Accepts all main size conductors up to 9/16 diameter. 8 square inches of bonding surface. Length 15 - M-1 Structural Sealant M1-10OZ-B M1-10OZ-G M1-10OZ-L M1-10OZ-W 16 - Ground Rod Clamp Color Black Gray Limestone White 10.1 fluid oz. cartridge. Application coverage (per tube) is approximately 40 cable holders or 40 bases. For use on metal, masonry and wood. Not for use on TPO or hypolon roofs. Install on clean surfaces in temperatures not below 30 F. Ground Rod Conductor Range 305 Up thru 1 #6 AWG MCM Stainless Steel U bolt for strength and corrosion resistance. Provides over 1-1/2 of contact between the ground electrode and conductors. Accomodates two horizontal conductors thru 250 MCM. Accomodates one vertical conductor up to 500 MCM Copper Clad Steel Ground Rods UL Mark /2 x 10 Yes 588 5/8 x 8 Yes /8 x 10 Yes /4 x 10 Yes x 10 Yes 17 - Air Terminal Braces Adhesive Feet CU / AL Type Standard Lengths Max. Air Terminal Supported Screw Hole AD Copper Adhesive Feet A0-18AD Aluminum Adhesive Feet Screw Hole AD Copper Adhesive Feet A0-24AD Aluminum Adhesive Feet Screw Hole AD Copper Adhesive Feet A0-36AD Aluminum Adhesive Feet Screw Hole AD Copper Adhesive Feet A0-48AD Aluminum Adhesive Feet Galvanized steel tripod braces are used for the support of air terminals that exceed 24" in length. Constructed of 1/4" steel rod with welded joints and a zinc/ultraseal plating. Braces available with 3/16" holes for anchoring with screws or nails or with adhesive feet when mounting to roofing membranes or similar surfaces where penetrations cannot be made. Lengths given are prior to installation. Please take technical notes below into consideration before ordering. Lightning Protection Installation Training Harger Lightning & Grounding 301 Ziegler Drive Grayslake, IL Phone: Website: hargersales@harger.com LPLC-2.17
Grounding Busbars. Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets.
LINE CARD Grounding Exothermic Lightning Protection Grounding Busbars Harger provides quality UL Listed grounding busbars to the electrical and telecommunication markets. 2 Grounding Busbars & Kits s GBI14210G
Cable to Cable Connections 2/0 NUWTUBE
Exothermic Connections LINE CARD to Connections ing Exothermic Lightning Protection PT Connection Type Run Tap Sol Sol PT-2S2SB PT-26B PT-2B PT-22B PT-2B PT-B PT-2B PT-B PT-B PT-B PT-2B PT-B PT-B PT-B
CRITO Connection technology. Double and triple T and TCC section busbars
Centre feed unit 5 Centre feed unit Centre feed unit 5 Centre feed unit up to 4000 A combines the advantages of high short-circuit capacity, drill-free mounting, brace terminal technology and clearly structured
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
Fuse & Switch. BUCHANAN Terminal Blocks. Product Facts High Density Blocks. Fuse Blocks. Switch Blocks. Common Features of 300 & 0300 Series
Fuse & Switch Product Facts High Density n Fuse and Switch rated 15A and 300V. n High Density 0.36" [9.14] centerline spacing saves panel space; at least 33 circuits per foot. Fuse n Provide in-line circuit
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
Grounding Solutions for Data Center Applications
Grounding Solutions for Data Center Applications B D A A C E G F E Legend For Typical Grounding Application (layout on following page) A) B) C) D) E) F) G) Vertical Rack Ground Bar Kit (see page 4) Horizontal
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
GROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
CT Metering. CT Metering. Meter Mounting Equipment
Single Meter Sockets, Without Bypass - CT Rated.................................. 67-68 Single Meter Sockets, CT Rated With Test Switch Bypass Provision............. 69-70 Meter Socket / Enclosure Combination
Revised: April 2018 ¹ SERVICE TO WIRELESS DEVICE ANTENNA ATTACHMENTS ON CUSTOMER SERVICE POLES (SHEET 1) CUSTOMER: 1. An overcurrent protective device including a disconnect switch shall
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
LIGHTNING PROTECTION SOLUTIONS ERICO SYSTEM 2000
LIGHTNING PROTECTION SOLUTIONS ERICO SYSTEM 2000 Pentair Engineered Electrical & Fastening Solutions is a leading global manufacturer and marketer of superior engineered products for niche electrical,
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
Single-Phase Ventilated
Single-Phase Ventilated 1 15 to 1,650 kva Applications n For general loads, including lighting, industrial and commercial applications Specifications n Meets DOE-2016 and C802 standards for energy efficiency
Grounding Accessories
Accessories Eaton offers a variety of grounding which are sold individually or as a kit. Kits are available as one kit per rack, allowing for ease of stocking and reordering. Vertical rack ground bar kit
Installation Guide. PV Booster Single Axis Tracker. Mechanical Roof Attachment.
Installation Guide PV Booster Single Axis Tracker Mechanical Roof Attachment Table of Contents PV Booster Specifications... 3 Installation Overview... 4 Materials Required... 5 Tracker Support Structure...
Conduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
CENTRE FEED UNIT UP TO 4000A. Safety
CENTRE FEED UNIT UP TO 000A Safety Centre feed unit New TCC section busbar: Connection options with CRITO PowerClip and CRITO ProfiClip, and terminal studs (screw in c-slot). 1-pole, side busbar support
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
Harger Lightning & Grounding
Introduction Harger Lightning & Grounding Master Equipment Catalog Since its beginning in 1960, Harger Lightning & Grounding has become a leader in the grounding and lightning protection industries. Founded
Sentinel Field Satellite Controller Metal Pedestal, Plastic Pedestal and Wall Mount Models Installation Instructions
WARNING HIGH VOLTAGE 115V 4 M AP Sentinel Field Satellite Controller Metal Pedestal, Plastic Pedestal and Wall Mount Models Installation Instructions Important: For your protection and the safety of the
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
Section 8. Grounding Products
Description...Page # 8.1 QuikTap... 168-171 8.2 Ground Rods and Accessories... 172-173 8.3 Chemical Ground Rod Kits... 174-175 8.4 Contact-GM... 176-177 8.5 Ground Access Wells... 178-180 8.6 Ground Bars:
ARCHITECTURAL ROOF SUPPORTS
SECTION E ARCHITECTURAL A-0 ARCHITECTURAL TABLE OF CONTENTS Thaler Or Equal ARS-100A Floating Walkway Roof Support ARS-102A Fire Route Walkway Roof Supports ARS-115 Rail Post Roof Supports ARS-122 Satellite
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Agency Approvals UL and CSA China RoHS - Below MCV Yes Color Red EU RoHS Compliant Yes Maximum Recommended Voltage Rating 600 Volt Units per Box 100
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
Pipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips
Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets
Printer-friendly format 3M Scotchlok Electrical Spring Connectors Y- BOX 5-8#22, 4-6#20, 2-5#18, 2-3#16 AWG, 100 per box, Yellow. Learn More...
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
CTN QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473. Two-Hole NEMA CTN QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 2000 2002 998 999 2004 200 200 2005 200 2008 207 2007 2009 200 20
Easy-On II Terminations
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables, concentric neutral, metal tape shielded or wire shielded cables without need for additional
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
SEALED PLATINUM SURFACE TEMPERATURE SENSOR MODEL 29399
DATA SHEET R-SCAPLC SEALED PLATINUM SURFACE TEMPERATURE SENSOR MODEL 29399 This low cost, sealed platinum surface RTD is the world s toughest for surface temperature measurement. The IEC 751 sensor is
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Pressure Sensitive Seam Tape Features 30.5m long rolls or sold by the metre (can be sold by 10th of metre). Must be used with an EPDM primer.
3 inch tape (75mm) Pressure Sensitive Seam Tape PS Seam Tape manufactured to precise width and thickness criteria with a clear poly backing for easier on site application. This Seam tape offers over 30%
SECTION BASIC ELECTRICAL REQUIREMENTS
SECTION 16001 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this
ELECTRICAL BUS BARS PRODUCT CATALOG #5
M E T C O M A R I N E ELECTRICAL BUS BARS PRODUCT CATALOG #5 Distribution Bus Bars Collection Bus Bars Junction Blocks Combination Bus Bars Fuse Holders Battery Links Custom Configurations METCO / DIVISION
LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LH600303C 1/10-30A 3P 600V Class H Box Lug Fuse Block Littelfuse Catalog Number LH600303C Manufacturer Littelfuse Description
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
AMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
Connecting Tips. Insulation Displacement Connectors
Insulation Displacement Connectors and Tools IDC for Electrical Applications The latest series of Scotchlok Insulation Displacement Connectors (IDCs) have kept all that was good about the original connectorthe
Conductions, Lightning protections
Conductions, Lightning Conductions; Lightning 7 Conductions; Lightning Round wire Wires for lightning protection and earthing systems Round wire different materials available in various dimensions Specification
Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
Cutouts (Standard, Linkbreak, Loadbreak) and Cutout-Arrester Combinations. Catalog 10A October 2015
10A Type C PORCELAIN Cutouts (Standard, Linkbreak, Loadbreak) and Cutout-Arrester Combinations Catalog 10A Page 1 Type C Cutouts LINKBREAK cutout, pages 8-10 LOADBREAK cutout with Arc-Chute interrupter,
Grounding Systems. Equipment Grounding & Grounded Conductors
Grounding Systems Equipment Grounding & Grounded Conductors Definitions A Grounded or Earthed system is one that is connected to the earth Grounded Conductor is a conductor that normally carries current
National Marine Manufacturers Association Product Compliance Specialist Examination D.C. Electrical (2013 MY) ABYC E-11 (08 Amended 09)
1. Two marine electrical technicians are discussing conductor support. Tech A says that all conductors shall be supported throughout their length or at least every 18. Tech B says that there is an exception
Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
DRILL CORD. Insulation Nominal Size. Approximate Amps Anixter. Number Number Thickness O.D.
DRILL CORD Synthetic Rubber Insulation 75 C, 600 Volts For use on drills and other mining equipment. For use on circuits not exceeding 600 volts at a maximum conductor temperature 75 C. 1. CONDUCTOR: Flexible,
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES TEMPORARY PROTECTIVE GROUNDING EQUIPMENT ACCESSORIES J-2 Grounding Equipment Accessories. www.salisburybyhoneywell.com BALL & SOCKET SYSTEM BALL STUDS
75 OHM COAXIAL CABLE (RG6)
RG6 CABLE (RG6) Drop Cable RG6 UL listed as type CMG for indoor cables. RG-6. 18 AWG copper covered steel with nominal diameter of 0.040 inch (1.02mm). Gas injected foam polyolefin insulation. Nominal
SUBMERSIBLE SECONDARY CONNECTORS
SUBMERSIBE SECONDARY CONNECTORS TYPE SSBC350- (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEA RUS Approved User friendly wide-port spacing (50% more room for cable training). Multiple
Model Description Vac. Max rating Pedestal Only: 36 Utility Pedestal W/O Disconnect General Duty Series:
MAPA Products MPD-XX / Pedestal Disconnect 30, 60, 100 amp February 2014 Pedestal Disconnect Installation Instructions Parts List MAPA Products Fusible Rainproof Pedestal Mounted Safety Switch provides
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
Fuse Blocks and Holders Fuse Block Technical Data Fuse Blocks 250 Volt E4 600 Volt E5 Cartridge Fuse Pullers Fuse Holders. ATC / Mini Fuse Tabs
BLOCKS AND HOLDERS 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION E BLOCKS AND HOLDERS E1 and Holders Fuse Block Technical Data E2-E3 250 Volt E4 600 Volt
OV-1 STANDING SEAM OVERVIEW. Temple Architectural Products 638 Moore Rd Avon Lake, OH 44012
STANDING SEAM OVERVIEW SW-2 CB-2 CB-1 R-1 RK-1 V-1 SW-1 RK-1 H-1 VR-1 P-1 HW-1 PB-1 DE-2 DE-1 RK-3 DE-2 SP-1 OV-1 DRIP EDGE - 1 6" WIDE HIGH TEMP UNDERLAYMENT STRIP PRE-NOTCHED PANEL END STANDING SEAM
NATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
For Professional Solar only
Wiley Electronics LLC Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For Professional Solar only Please read carefully before installing. WEEB-PMC WEEBLug Copper Braid
Corrosion Protection for Electrical Conduit and Fittings
Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Residential Transition Box. Model RU-1. Specifications. Electrical
Residential Transition Box Model RU-1 Model RU-1 transition box provides a quick, simple, and easy transition between a microinverter trunk cable and stranded wire. Using only a single flathead screwdriver,
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
Moisture-proof cable branch boxes Ceiling distribution boxes Lamp suspension boxes Wall boxes Concrete wall boxes and accessories
Branch and lustre terminals Apparatus and light terminals Porcelain terminals Screwless terminals Flat plug terminals Flat plug branch terminals Mains branch terminals Connection terminals Earthed wire
For AEE SnapNRack Only Please read carefully before installing.
Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For AEE SnapNRack Only Please read carefully before installing. WEEB-PMC WEEB Bonding Jumper-6.7 WEEBL-6.7 assembly Products
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
Accessories, Splices and Connectors
10.137 Accessories, Splices and Connectors Splices and Connectors Pgs. 137-142 Misc. Accessories Pgs. 143 Ground Connectors Pg. 144 Separators Pgs 145 For more information or to order, call 1-800-277-4810
All Purpose Fasteners and Plates
Size Quantity Weight Qty/ /Pail 2" Metal Plates* 4180 2" 1000/pail 34 lbs 40 $105.00 Insulation Fastening Plate (Round)* 4190 3" 1000/pail 42 lbs 35 $110.00 V-Plate* 4182 2-1/4" 500/pail 28 lbs 80 $59.00
SYSTEM PROTECTION - PLATING
INTRODUCTION 1. Plates F1 thru F10 supply only the material required for one-phase. Therefore, for threephase construction, you will be required to call for the specified plate three times at that station.
UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
Cam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
MP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
SOLAR PV STANDARD PLAN - COMPREHENSIVE Central/String Inverter Systems for One and Two Family Dwellings
SCOPE: Use this plan ONLY for utility-interactive central/string inverter systems not exceeding a total combined system ac inverter output rating of 10kW on the roof of a one- or two-family dwelling or
CPCS the U.S.A.
Clampsticks "AKA" Shotgun Sticks feature a high quality foam filled fiberglass reinforced plastic tube providing maximum insulation and mechanical strength. They are lightweight and easy to handle. Feature
FASTENERS, SPRINGS, DETENT BALLS & MISC. HARDWARE PAINT, SEALANT, ADHESIVES, DECALS & LEAK DETECTORS
CROSS REFERENCE LANDING LEG PARTS TWISTLOCK & PINLOCK ASSEMBLIES & PARTS STEEL PANELS & STRUCTURAL STEEL ALUMINUM EXTRUSIONS & STRUCTUAL COMPONENTS DOOR HARDWARE AXLES, SUSPENSION PARTS, 5TH WHEEL & COMPONENTS
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
MP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
JOSLYN. Underground Cable Accessories. Table of Contents. JPT/JIPT Polymer Terminations. ShrinkTite Sealing Kits. Easy-On II Terminations
Underground Cable Accessories JOSLYN Table of Contents JPT/JIPT Polymer Terminations 15kV, 25kV & 35kV ShrinkTite Sealing Kits 1kV In-Line Splice Sealing Kit Cable Jacket Sealing Kit Easy-On II Terminations
Connectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
TE-6300 Series Temperature Sensors
TE-6300 Series Temperature Sensors Product Bulletin Code No. LIT-216320 Issued July 14, 2008 Supersedes November 13, 2006 The TE-6300 Temperature Sensor line provides economical solutions for a wide variety
HARDWARE ASSORTMENTS. A wide variety of assortment kits including: -Screws & Rivets -Washers -Clips & Cotter Pins -Fuses -O-Rings and many more!
HARDWARE #6 Flat Washer #6 Lock Washer M5 Hex Nuts 2 M4 x 16 M4 20 pc ASSORTMENTS A wide variety of assortment kits including: -Nuts & Bolts -Nylon Locknuts -s & Rivets -Washers -Clips & Cotter Pins -Fuses
LFJ602003C 200A 600V Fus Block
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LFJ602003C 200A 600V Fus Block Littelfuse Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
RiLine mm system technology for the global market
60 system technology for the global market 02 RiLine60 Busbar systems 3 and 4 pole Support + bars + contact hazard protection Flat copper bar system, see 276 in HB 33 PLS busbar system, see 278 in HB 33
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY connectorproducts.com 1300 John Tipton Blvd. Pennsauken, NJ 08110 Phone: 856.829.9190 Fax: 856.829.9195 Catalog IX.1 American Design American Made Our success
System Benefits Should you have any further questions, please contact our UL hotline at: +49 (0)9563/ Connection Technology EQUES Technology
System Benefits The small external dimensions of the 60mm busbar system allow for a wide range of busbars, so that it can be easily adapted to a wide range of currents. These features result in the particularly
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
SIGNAL HEADS. The LED signal indication must operate on a nominal 120 VAC power source.
SIGNAL HEADS All signal heads and pedestrian signal heads must be Standard ITE black poly-carbonate signal heads. Standard ITE vehicle signal heads must utilize Light Emitting Diodes (LED) units. The vehicle
UK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
High barriers Recognized by UL and cul Self-extinguishing materials Nonferrous material Corrosion-resistant nickel finish Safety-grip handle A complete line of switches is available for meter, relay, instrument,
4.0 RAIL-FREE RACKING. Utilizes EcoFasten Solar s patented technology
4.0 RAIL-FREE RACKING Utilizes EcoFasten Solar s patented technology Document Date: 3.2.2018 Contents Pg. 1 Assets of Design Features System Components Pg. 2 Rock-It 4.0 Mount Assembly Rock-It 4.0 Coupling