Conduit Bushings for Rigid Metal Conduit and IMC
|
|
|
- Sharyl Powers
- 5 years ago
- Views:
Transcription
1 Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated BBU: impact resistant plastic or thermoplastic Certifications and Compliances UL Standard: 514B UL Listed: E14814 CSA Standard: C22.2 No CSA Certified: NEMA: FB-1 Threaded s Malleable Iron, Zinc Electroplated 1/ (1.03) 9.7 (0.38) 1.36 (3.00) BU50 3/ (1.25) 11.2 (0.44) 1.81 (4.00) BU (1.56) 12.7 (0.50) 3.18 (7.00) BU / (2.00) 16.0 (0.63) 5.90 (13.00) BU / (2.16) 16.0 (0.63) 6.35 (14.00) BU (2.63) 16.0 (0.63) 8.62 (19.00) BU / (3.19) 19.1 (0.75) (43.00) BU (3.81) 23.9 (0.94) (56.00) BU / (4.44) 23.9 (0.94) (76.00) BU (4.94) 26.9 (1.06) (109.00) BU (6.00) 30.2 (1.19) (144.00) BU (7.38) 33.3 (1.31) (243.00) BU600 Threaded s Insulated 150 C Temperature Rating Malleable Iron, Zinc Electroplated 1/ (1.19) 12.7 (0.50) 1.81 (4.00) BU50I 3/ (1.44) 14.2 (0.56) 2.72 (6.00) BU75I (1.75) 16.0 (0.63) 4.08 (9.00) BU100I 1-1/ (2.13) 19.1 (0.75) 4.54 (10.00) BU125I 1-1/ (2.31) 22.4 (0.88) 8.62 (19.00) BU150I (2.81) 23.9 (0.94) (24.00) BU200I 2-1/ (3.38) 25.4 (1.00) (47.00) BU250I (4.06) 28.7 (1.13) (60.00) BU300I 3-1/ (4.50) 30.2 (1.19) (69.00) BU350I (5.19) 33.3 (1.31) (100.00) BU400I (6.06) 33.3 (1.31) (200.00) BU500I (7.25) 33.3 (1.31) (243.00) BU600I 2241
2 Threadless s Insulated 150 C Temperature Rating Malleable Iron, Zinc Electroplated 1/ (1.19) 9.7 (0.38) 1.36 (3.00) BU50SI 3/ (1.44) 11.2 (0.44) 1.81 (4.00) BU75SI (1.75) 12.7 (0.50) 3.18 (7.00) BU100SI 1-1/ (2.13) 16.0 (0.63) 5.90 (13.00) BU125SI 1-1/ (2.31) 16.0 (0.63) 6.35 (14.00) BU150SI (2.81) 16.0 (0.63) 8.62 (19.00) BU200SI 2-1/ (3.38) 19.1 (0.75) (43.00) BU250SI (4.06) 23.9 (0.94) (56.00) BU300SI 3-1/ (4.50) 23.9 (0.94) (76.00) BU350SI (5.19) 26.9 (1.06) (109.00) BU400SI Threaded Capped s Malleable Iron, Zinc Electroplated, Polyethylene Cap 1/ (1.03) 9.7 (0.38) 1.36 (3.00) BUC50 3/ (1.25) 11.2 (0.44) 2.27 (5.00) BUC (1.56) 12.7 (0.50) 3.63 (8.00) BUC100 Commercial Products 1-1/ (2.00) 16.0 (0.63) 5.44 (12.00) BUC / (2.16) 16.0 (0.63) 7.71 (17.00) BUC (2.63) 16.0 (0.63) 9.07 (20.00) BUC / (3.19) 19.1 (0.75) (40.00) BUC250 RIGID AND IMC FITTINGS (3.81) 23.9 (0.94) (52.00) BUC / (4.44) 23.9 (0.94) (76.00) BUC (4.94) 26.9 (1.06) (114.00) BUC (6.00) 30.2 (1.19) (149.00) BUC (7.38) 33.3 (1.31) (250.00) BUC
3 Threaded Impact Resistant Plastic 105 C Temperature Rating 1/ (1.06) 10.4 (0.41) 0.27 (0.60) BBU50 3/ (1.31) 10.4 (0.41) 0.36 (0.80) BBU (1.56) 14.2 (0.56) 0.68 (1.50) BBU / (1.91) 14.2 (0.56) 1.04 (2.30) BBU / (2.19) 14.2 (0.56) 1.36 (3.00) BBU (2.69) 16.0 (0.63) 1.81 (4.00) BBU / (3.19) 18.3 (0.72) 3.54 (7.80) BBU (3.84) 19.1 (0.75) 4.54 (10.00) BBU / (4.34) 19.1 (0.75) 5.90 (13.00) BBU (4.84) 19.8 (0.78) 4.99 (11.00) BBU400 Threaded Thermoplastic 150 C Temperature Rating 1/ (1.06) 10.4 (0.41) 0.36 (0.80) BBU50H 3/ (1.31) 10.4 (0.41) 0.41 (0.90) BBU75H (1.56) 14.2 (0.56) 0.82 (1.80) BBU100H 1-1/ (1.91) 14.2 (0.56) 1.27 (2.80) BBU125H 1-1/ (2.19) 14.2 (0.56) 1.50 (3.30) BBU150H (2.69) 16.0 (0.63) 2.00 (4.40) BBU200H 2-1/ (3.19) 18.3 (0.72) 6.49 (14.30) BBU250H (3.84) 19.1 (0.75) 4.99 (11.00) BBU300H 3-1/ (4.34) 19.1 (0.75) 6.49 (14.30) BBU350H (4.84) 19.8 (0.78) 8.48 (18.70) BBU400H 2243
4 Insulated Grounding s for Threaded Rigid Metal Conduit and IMC GIB-LS-AC and GIB-L-AC Series - with Aluminum Lay-In-Lug for Copper or Aluminum Conductors. GIB-LS-BC and GIB-L-BC Series - with Bronze Lay-In-Lug for Copper Conductors Only. Wire Size Trade Size Min. Max. A B C Turning Radius w/lug Aluminum Lug Bronze Lug 1/2 14 SOL 4 STR 35.8 (1.41) 11.2 (0.44) 30.2 (1.19) GIB-50L-4AC GIB-50L-4BC 3/4 14 SOL 4 STR 36.6 (1.44) 12.7 (0.50) 33.3 (1.31) GIB-75L-4AC GIB-75L-4BC 1 14 SOL 4 STR 44.5 (1.75) 14.2 (0.56) 36.6 (1.44) GIB-100L-4AC GIB-100L-4BC 1 14 SOL 2/0 STR 44.5 (1.75) 14.2 (0.56) 42.9 (1.69) GIB-100L-20AC GIB-100L-20BC 1-1/4 14 SOL 4 STR 54.1 (2.13) 16.0 (0.63) 41.4 (1.63) GIB-125L-4AC GIB-125L-4BC 1-1/4 14 SOL 2/0 STR 54.1 (2.13) 16.0 (0.63) 35.8 (1.41) GIB-125L-20AC GIB-125L-20BC 1-1/2 14 SOL 4 STR 58.7 (2.31) 17.5 (0.69) 44.5 (1.75) GIB-150L-4AC GIB-150L-4BC 1-1/2 14 SOL 2/0 STR 58.7 (2.31) 17.5 (0.69) 50.8 (2.00) GIB-150L-20AC GIB-150L-20BC 2 14 SOL 4 STR 71.4 (2.81) 19.1 (0.75) 50.8 (2.00) GIB-200L-4AC GIB-200L-4BC Commercial Products 2 14 SOL 2/0 STR 71.4 (2.81) 19.1 (0.75) 57.2 (2.25) GIB-200L-20AC GIB-200L-20BC 2-1/2 14 SOL 4 STR 85.9 (3.38) 22.4 (0.88) 57.2 (2.25) GIB-250L-4AC GIB-250L-4BC 2-1/2 14 SOL 2/0 STR 85.9 (3.38) 22.4 (0.88) 63.5 (2.50) GIB-250L-20AC GIB-250L-20BC RIGID AND IMC FITTINGS 2-1/2 6 STR 250 STR 85.9 (3.38) 22.4 (0.88) 62.7 (2.47) GIB-250L-25AC GIB-250L-25BC 3 14 SOL 4 STR (4.06) 33.3 (1.31) 66.8 (2.63) GIB-300L-4AC GIB-300L-4BC 3 14 SOL 2/0 STR (4.06) 33.3 (1.31) 71.4 (2.81) GIB-300L-20AC GIB-300L-20BC 3 6 STR 250 STR (4.06) 33.3 (1.31) 84.1 (3.31) GIB-300L-25AC GIB-300L-25BC 2244
5 Insulated Grounding s for Threaded Rigid Metal Conduit and IMC GIB-LS-AC and GIB-L-AC Series - with Aluminum Lay-In-Lug for Copper or Aluminum Conductors. GIB-LS-BC and GIB-L-BC Series - with Bronze Lay-In-Lug for Copper Conductors Only. Wire Size Trade Size Min. Max. A B C Turning Radius w/lug Aluminum Lug Bronze Lug 3-1/2 14 SOL 4 STR (4.50) 25.4 (1.00) 73.2 (2.88) GIB-350L-4AC GIB-350L-4BC 3-1/2 14 SOL 2/0 STR (4.50) 25.4 (1.00) 77.7 (3.06) GIB-350L-20AC GIB-350L-20BC 3-1/2 6 STR 250 STR (4.50) 25.4 (1.00) 88.9 (3.50) GIB-350L-25AC GIB-350L-25BC 4 14 SOL 4 STR (5.19) 26.9 (1.06) 79.5 (3.13) GIB-400L-4AC GIB-400L-4BC 4 14 SOL 2/0 STR (5.19) 26.9 (1.06) 85.9 (3.38) GIB-400L-20AC GIB-400L-20BC 4 6 STR 250 STR (5.19) 26.9 (1.06) 96.8 (3.81) GIB-400L-25AC GIB-400L-25BC 5 14 SOL 4 STR (6.06) 31.8 (1.25) 92.2 (3.63) GIB-500L-4AC GIB-500L-4BC 5 14 SOL 2/0 STR (6.06) 31.8 (1.25) 98.6 (3.88) GIB-500L-20AC GIB-500L-20BC 5 6 STR 250 STR (6.06) 31.8 (1.25) (4.31) GIB-500L-25AC GIB-500L-25BC 6 14 SOL 4 STR (7.25) 33.3 (1.31) (4.25) GIB-600L-4AC GIB-600L-4BC 6 14 SOL 2/0 STR (7.25) 33.3 (1.31) (4.44) GIB-600L-20AC GIB-600L-20BC 6 6 STR 250 STR (7.25) 33.3 (1.31) (4.88) GIB-600L-25AC GIB-600L-25BC 2245
Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...
SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Taxonomies, Classifications, and Categories MYER'S HUB, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTORS
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 NTCC125 1-1/4" Rigid Threadless Raintight Coupling ppleton/oz Gedney Manufacturer Description Weight per unit Product
COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets
BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
Thin Wall Conduit Fittings (For EMT Conduit)
Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings
Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic
Applications. Separate sealing chamber and switch construction. Used on 20 Amp 4-way and all 30 Amp models.
Contender Series Factory Sealed Front Operated Tumbler Switches Malleable Iron Body and Cover. Furnished with Internal Ground. NEMA 3, 7CD, 9EFG Applications Designed to prevent arcing of enclosed switches
CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.
Myers Hubs Class I, Div. 2 Class II, Div. 1 and 2 Class III when installed in accordance with the NEC. CP Myers Scru-tite TM and Ground hub are used in the termination of electrical circuits through wall
Rigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
americanfittingscorp.com t: e:
Reusable Fittings / Straight Connectors Size Range: 3/8 to 5 Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect
Commercial Products. New Products in the Commercial Products Product Line
Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
U-18. Company furnishes and installs: 10. Service lateral and connectors. 11. Conduit package, Amperes.
SERVICE TERMINATION IN A TERMINATION COMPARTMENT DIRECT BURIED OR CONCRETE ENCASED LATERAL ALL 1-PHASE VOLTAGES, 400-800 AMPERES ALL 3-PHASE VOLTAGES, 400-3000 AMPERES ONLY Obtain acceptance for 1-phase
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
EDS Factory Sealed Tumbler Switches UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D NEMA 7 B CD, 9EFG Applications Designed to prevent arcing of enclosed switches
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Controls CONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SWITCHES
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
EC&N. Elbows, Couplings & Nipples
EC&N Elbows, Couplings & Nipples ELBOWS, COUPLINGS & NIPPLES Superior physical protection for electrical conductors Established in 1877, Wheatland Tube is the only conduit manufacturer that also produces
SUBMITTAL TRANSMITTAL OCPS CLAY SPRINGS ES REVIEWED SUBMITTAL NUMBER: SUBMITTAL DETAILS: CONTRACTOR/CM:
OCPS CLAY SPRINGS ES SUMITTAL DETAILS: SUJECT: CONDUIT UILDING REFERENCE: DATE RECIEVED: Oct 09, 204 DISCIPLINE: Electrical PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: 26 05 REVIEWER DUE DATE: 0/2/204
320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Customer Requirements Meter Socket Configurations
Application Information on meter socket configurations available from Tacoma Power. For enclosed meter pedestals, see standard C-MR-0020 Customer Requirements, Enclosed Meter Pedestal. General Requirements
CONDUIT BODIES CONDUIT BODIES. Phone:
i i Con it Bo ies allea le I on o i i I C con it cond ctors or p llin splicin Tapered threaded hu s - NPT Suita le or use in concrete Threaded LB Conduit Bodies MLB1 1/2 4-11/16 1-5/16 2-1/16 70 70.6 MLB2
Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural
Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical
GSC CONDUIT FITTING SOLUTIONS PRODUCT CATALOG
PRODUCT CATALOG INDEX EMT CONDUIT FITTINGS EMT STRAP (ONE HOLE) P-1 CONDUIT OUTLET BOX COVER P-9 EMT STRAP ( TWO HOLE) P-1 CONDUIT OUTLET BOX TYPE GUA P-9 EMT CONNECTOR P-1 CONDUIT OUTLET BOX TYPE GUAT
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
PRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Conductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DR20022 Cable Support Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category DR20022
DEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
ALUMINUM OUTLET BODIES
KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Rigid/Aluminum Conduit Bodies, Gaskets and Covers
Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain
Contender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw.
Contender Series Factory Sealed Control Stations and Pilot Lights Furnished with Internal Ground Screw. Applications Push buttons and selector switches are used in conjunction with contactors or magnetic
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
Aluminium Conduit. Kopex Martel. Fittings. Liquid Tight Fittings Coupler Connector. PVC Coated Conduit. Fittings. Egatu
Rigid Conduit Fittings Elbows Couplings Connectors Nipples Pulling Elbows Long & Short Elbows Piece Coupling Hubs Reducing Washers & Bushings Male Enlargers Female Reducers Straps, Hangers & Clamps Unions
Condulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
Bonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
Product Information. Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit. MD2SR Interlocked Switched Receptacle
L02-L12 01 Receptacles and Plugs: Explosionproof For use with Threaded Metal Conduit. Applications Locations where receptacle is used with stationary or portable electrically operated devices such as lighting
American made. American strong. The mark of a true craftsman. A strong history. Mission. . Republic Steel acquires facility from Elyria Iron and Steel
American made. American strong. For more than 85 years, Republic Conduit has manufactured the nation s premier steel electrical conduit. The mark of a true craftsman. Since 1928, Republic Conduit has been
Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
Junction Boxes Hazardous and Non-Hazardous
Junction Boxes Hazardous and Non-Hazardous Description Page No. Application/Selection 112 Boxes Flush EGJ Series 19 WJBF Recessed Sidewalk Cover Series 116 Service Station EGJ Series 19 GUA Series 17 GUP
SunLink PV System Disconnect with Arc Fault Detection Installation and Operations Manual
Combiner Box Installation & Operations Manual SunLink PV System Disconnect with Arc Fault Detection Installation and Operations Manual TABLE OF CONTENTS Notices and Safety Precautions Pages 1-2 Combiner
Lighting and Power Distribution Panelboards
EXPLOSIONPROOf Lighting and Power Distribution Panelboards The design offers sufficient gutter space on sides to allow through wiring and easy lug connection. All enclosures are furnished with hinges,
IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448
CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard
Bulletin 1494V Variable-Depth Flange-Mounted Circuit Breaker Operating Mechanism
Bulletin V Variable-Depth Flange-Mounted Circuit Breakers Product Overview/Product Selection Circuit Breaker Kits Cat. No. V-C Circuit Breaker Kit (Shown without handle and connecting rod) Bulletin V Variable-Depth
AMERICAN FITTINGS Corporation
AMERICAN FITTINGS Corporation Conduit Fittings Flexible Cord Rigid/IMC Liquid Tight EMT Wire Mesh Think American USA Made Since 1946 2009 Edition PLEASE NOTE THIS CATALOG IS BEING UPDATED AND SHOULD BE
Corrosion Protection for Electrical Conduit and Fittings
Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat
UNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators
MAx-305 & MAx-38 Series MAx-405 Through MAx-49 Series Two-Position Actuators General Instructions Application For two-position operation of dampers, valves, and other equipment which require the return
In This Section. and. Fittings & Non-Metallic Rigid Conduit Fittings and Accessories. Steel City Fittings
In This Section and Steel City Overview...F-2 F-3 Thinwall Conduit (EMT)...F-4 F-9 Rigid/Intermediate Grade Conduit...F-0 7 Flexible Cord and Power Cable Connectors...F-8 Liquidtight Flexible Metal Conduit
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
General Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
YOUR FULL LINE SOURCE FOR PVC ELECTRICAL PRODUCT
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
PV Vault Yielding safety quickly
PV Vault Yielding safety quickly Designed with safety in mind ABB now offers the UL 1741 certified Solar Rapid Shutdown Device, PV Vault rated at 600 V DC to meet NEC 690.12 code requirement for string
Enclosures. Section E
Enclosures Section E Enclosures and junction boxes built and configured to meet the requirements of the most demanding hazardous areas and industrial environmental applications across the globe. E Enclosures
SECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
ELECTRICAL CONDUIT. EMT IMC Rigid Aluminum
ELECTRICAL CONDUIT EMT IMC Rigid Aluminum QUALITY CONDUIT. FRIENDLY SERVICE. FAST DELIVERY. We know you have a lot of options for electrical conduit. That s why we work hard to be your first choice. Why
ADE 4F. > For armoured cable > IP68. > Compliance. > EX Performance. > Nickel plated brass and stainless steel
ADE 4F 4 F U N C T I O N S : D O U B L E > For armoured cable > IP68 > Compliance > EX 60079-0 2009 Performance > Nickel plated brass and stainless steel > Optional : aluminium and bronze raw material
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
VA-640GSX024P. Overview. Applications. Features & Benefits. Datasheet. Large Globe Valve Actuators
VA-640GSX024P Datasheet Large Globe Actuators Overview The VA-640GSX024P Electronic valve actuators receive a 0 to 10 VDC or 4 to 20 ma control signal to proportionally control the valve. Applications
Note: Supply from an underground network often requires use of stud type connector. Consult your local utility.
BQ2 Series 200 A 600 V; Standard Enclosure Conductor range: 6 AWG 250 kcmil Aluminum tunnel type connectors for both load and line sides For overhead, underground and combination overhead/underground Primarily
Up to 60 A Class R 250 V and 600 V ferrule power distribution fuse blocks
Technical Data 09 Effective June 06 Up to 60 A Class R 50 V and 600 V ferrule power distribution fuse blocks Catalog symbols: RM5060-_MW_ RM60030-_MW_ RM60060-_MW_ Features and benefits: Combination power
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and