Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
|
|
|
- Junior Fields
- 5 years ago
- Views:
Transcription
1 Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture. Features Available in straight or 90, aluminum or steel construction to meet the requirements of rugged service on all types of equipment and in all non-hazardous areas. Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed. Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord. Steel or Teflon* washer reduces friction between grommet and connector cap providing even pressure distribution, eliminating leakage resulting from grommet distortion. Large aluminum connectors 1-1/2 thru 4 and all steel connectors are constructed with hex head cap. For particularly harsh applications, wire mesh strain reliefs may be used with cord and cable connectors. CG Series in aluminum construction is available in straight type from 1/4 thru 4, 90 type from 3/8 thru 1-1/4. CG Series in steel construction is available in straight type from 1/4 thru 2 and 90 type from 3/8 thru 1-1/4. Silicone free. Standard Materials Aluminum connectors Straight body: aluminum 90 body: cast aluminum Cap: copperfree (4/10 of 1% or less) aluminum Sealing grommet: neoprene Washer: steel or Teflon* Wire mesh strain relief: stainless steel Cap on wire mesh: copperfree (4/10 of 1% or less) aluminum Steel connectors Straight body: machined steel 90 body: malleable iron Cap: machined steel Sealing grommet: neoprene Washer: steel or Teflon Wire mesh strain relief: stainless steel Cap on wire mesh: steel, zinc plate Options PVC coating available on select connectors. Add suffix -PVC to catalog number. NEC/CEC Certifications and Compliances UL Standard: 514B UL Listed: E14817 CSA Standard: C22.2 No CSA Certified: Related Products Locknuts are available, refer to Commercial Fittings Aluminum Straight 90 Steel Straight 90 Wire Mesh Strain Relief for Cord Connectors CORD GRIP CATALOG NUMBER CG-6275 APPLETON ELECTRIC LISTED 972H CABLE DIAMETER RANGE MIN. MAX Color coded label Teflon is a registered trademark of E.I. DuPont de Nemours and Co. 313
2 Cable Range Color Coded Dimensions mm (in) Weight Per 100 kg (lb) Catalog Number (Inches) Label A B Aluminum Steel Aluminum Steel 1/4 Inch Hubs Purple/Pink 22.4 (0.88) 19.1 (0.75) CG-0625 CG-0625S Orange/Gray 22.4 (0.88) 19.1 (0.75) 1.68 (3.70) 4.08 (9.00) CG-1525 CG-1525S 3/8 Inch Hubs Red 20.6 (0.81) 23.9 (0.94) 2.54 (5.60) 6.71 (14.80) CG-1238 CG-1238S Brown 20.6 (0.81) 23.9 (0.94) 2.27 (5.00) 5.99 (13.20) CG-1838 CG-1838S Yellow 20.6 (0.81) 23.9 (0.94) 2.54 (5.60) 6.71 (14.80) CG-3138 CG-3138S 1/2 Inch Hubs Red 20.6 (0.81) 23.9 (0.94) 2.72 (6.00) 7.08 (15.60) CG-1250 CG-1250S Brown 20.6 (0.81) 23.9 (0.94) 2.72 (6.00) 7.08 (15.60) CG-1850 CG-1850S Aluminum Yellow 20.6 (0.81) 23.9 (0.94) 2.72 (6.00) 7.08 (15.60) CG-3150 CG-3150S Purple 20.6 (0.81) 31.8 (1.25) 3.63 (8.00) 9.43 (20.80) CG-3750 CG-3750S Pink 20.6 (0.81) 31.8 (1.25) 3.63 (8.00) 9.43 (20.80) CG-5050 CG-5050S Orange 20.6 (0.81) 31.8 (1.25) 3.63 (8.00) 9.43 (20.80) CG6250 CG-6250S 3/4 Inch Hubs Blue 22.4 (0.88) 31.8 (1.25) 4.54 (10.00) (26.00) CG-1275 CG-1275S Green 22.4 (0.88) 31.8 (1.25) 4.54 (10.00) (26.00) CG-2575 CG-2575S Purple 22.4 (0.88) 31.8 (1.25) 4.54 (10.00) (26.00) CG-3775 CG-3775S Pink 22.4 (0.88) 31.8 (1.25) 4.54 (10.00) (26.00) CG-5075 CG-5075S Orange 22.4 (0.88) 35.1 (1.38) 4.54 (10.00) (26.00) CG-6275 CG-6275S Gray 22.4 (0.88) 35.1 (1.38) 4.54 (10.00) (26.00) CG-7575 CG-7575S 1 Inch Hubs Purple 23.9 (0.94) 35.1 (1.38) 6.80 (15.00) (39.00) CG CG-37100S Pink 23.9 (0.94) 35.1 (1.38) 6.80 (15.00) (39.00) CG CG-50100S Orange 23.9 (0.94) 35.1 (1.38) 6.80 (15.00) (39.00) CG CG-62100S Gray 23.9 (0.94) 44.5 (1.75) 6.80 (15.00) (39.00) CG CG-75100S Red 23.9 (0.94) 44.5 (1.75) 6.80 (15.00) (39.00) CG CG-87100S Steel Blue 23.9 (0.94) 44.5 (1.75) 6.80 (15.00) (39.00) CG CG S 1-1/4 Inch Hubs Gray 26.9 (1.06) 44.5 (1.75) (23.00) (60.00) CG CG-75125S Red 26.9 (1.06) 44.5 (1.75) (25.00) (65.00) CG CG-87125S Blue 26.9 (1.06) 54.1 (2.13) (25.00) (65.00) CG CG S Brown 26.9 (1.06) 54.1 (2.13) (25.00) (65.00) CG CG S Green 26.9 (1.06) 54.1 (2.13) 9.98 (22.00) (57.00) CG CG S Yellow 26.9 (1.06) 54.1 (2.13) 9.07 (20.00) (52.00) CG CG S 1-1/2 Inch Hubs (1.94) 55.6 (2.19) (31.10) (92.00) CG CG S (2.63) 65.0 (2.56) (61.20) (160.00) CG CG S 2 Inch Hubs (2.44) 76.2 (3.00) (95.00) (230.00) CG CG S (2.44) 81.0 (3.19) (100.00) CG /2 Inch Hubs CORD GRIP CATALOG NUMBER (3.06) 87.4 (3.44) (141.30) CG CG (3.06) 93.7 (3.69) (141.90) CG LISTED 972H CABLE DIAMETER 3 Inch Hubs RANGE MIN. MAX (3.06) (4.06) (196.30) CG (3.25) (4.50) (256.30) CG Color coded label 3-1/2 Inch Hubs (3.25) (4.75) (212.50) CG (3.25) (5.00) (225.00) CG Inch Hubs (3.25) (5.25) (275.00) CG (3.25) (5.50) (293.80) CG APPLETON ELECTRIC Remove sufficient outer covering of cord or cable to pass conductors through connector body. Not UL Listed. Not CSA Certified. PVC coating available on select connectors. Add suffix -PVC to catalog number. Not UL Listed below cable O.D " 314
3 Steel Aluminum CORD GRIP CATALOG NUMBER CG-6275 APPLETON ELECTRIC LISTED 972H CABLE DIAMETER RANGE MIN. MAX Color coded label Cable Range (Inches) 3/8 Inch Hubs Color Coded Label Dimensions mm (in) Weight Per 100 kg (lb) Catalog Number A B Aluminum Steel Aluminum Steel Red 41.4 (1.63) 23.9 (0.94) 5.90 (13.00) (34.00) CG CG S Brown 41.4 (1.63) 23.9 (0.94) 3.18 (7.00) 8.35 (18.40) CG CG S Yellow 41.4 (1.63) 23.9 (0.94) 3.18 (7.00) 8.35 (18.40) CG CG S 1/2 Inch Hubs Blue 41.4 (1.63) 31.8 (1.25) 5.90 (13.00) (34.00) CG CG S Green 41.4 (1.63) 31.8 (1.25) 5.90 (13.00) (34.00) CG CG S Purple 41.4 (1.63) 31.8 (1.25) 5.44 (12.00) (31.20) CG CG S Pink 38.1 (1.5) 31.8 (1.25) 4.54 (10.00) (26.00) CG CG S Orange 38.1 (1.5) 31.8 (1.25) 5.44 (12.00) (31.20) CG CG S 3/4 Inch Hubs Green 44.5 (1.75) 35.1 (1.38) 7.26 (16.00) (41.60) CG CG S Purple 44.5 (1.75) 35.1 (1.38) 7.26 (16.00) (41.60) CG CG S Pink 44.5 (1.75) 35.1 (1.38) 7.26 (16.00) (41.60) CG CG S Orange 41.4 (1.63) 35.1 (1.38) 7.26 (16.00) (41.60) CG CG S Gray 41.4 (1.63) 35.1 (1.38) 7.26 (16.00) (41.60) CG CG S 1 Inch Hubs Orange 55.6 (2.19) 44.5 (1.75) (26.00) (67.60) CG CG S Gray 55.6 (2.19) 44.5 (1.75) (40.00) (104.00) CG CG S Red 55.6 (2.19) 44.5 (1.75) (25.00) (65.00) CG CG S Blue 55.6 (2.19) 44.5 (1.75) (26.00) (67.60) CG CG S 1-1/4 Inch Hubs Gray 65.0 (2.56) 54.1 (2.13) (40.00) (104.00) CG CG S Red 65.0 (2.56) 54.1 (2.13) (41.00) (106.60) CG CG S Blue 65.0 (2.56) 54.1 (2.13) (39.00) (101.40) CG CG S Brown 62.0 (2.44) 54.1 (2.13) (38.00) (98.80) CG CG S Green 62.0 (2.44) 54.1 (2.13) (60.00) (156.00) CG CG S Yellow 62.0 (2.44) 54.1 (2.13) (35.00) (91.00) CG CG S Remove sufficient outer covering of cord or cable to pass conductors through connector body. Not UL Listed below cable O.D " 315
4 Replacement Glands Not to be used with stainless steel and nickle plated aluminum CG connectors For Use With Straight Connectors For Use With 90º Connectors Cable Range (Inches) Weight Per 100 kg (lb) Catalog Number For Connectors with 3/8 Inch Hubs CG-1238 CG (2.50) CGG-221 CG-1838 CG (1.90) CGG-222 CG-3138 CG (1.30) CGG-223 For Connectors with 1/2 Inch Hubs CG (2.50) CGG-221 CG (1.90) CGG-271 CG (1.90) CGG-222 CG (1.30) CGG-272 CG (1.30) CGG-223 CG-3750 CG (1.90) CGG-273 CG-5050 CG (1.30) CGG-274 CG-6250 CG (1.00) CGG-275 For Connectors with 3/4 Inch Hubs CG (1.90) CGG-271 CG (1.30) CGG-272 CG (1.30) CGG-325 CG (1.90) CGG-273 CG (1.90) CGG-321 CG (1.30) CGG-274 CG (1.30) CGG-322 CG-6275 CG (1.00) CGG-323 CG-7575 CG (1.00) CGG-324 For Connectors with 1 Inch Hubs CG (1.90) CGG-321 CG (1.30) CGG-322 CG (1.00) CGG-323 CG (1.00) CGG-374 CG CG (2.90) CGG-371 CG CG (2.50) CGG-372 CG CG (2.20) CGG-373 For Connectors with 1-1/4 Inch Hubs CG (2.90) CGG-371 CG (2.90) CGG-425 CG (2.50) CGG-372 CG (2.50) CGG-426 CG CG (2.20) CGG-421 CG CG (1.90) CGG-422 CG CG (1.60) CGG-423 CG CG (1.30) CGG-424 For Steel Backed Neoprene Sealing Gaskets and Steel Gasketed Sealing Locknuts, see Commercial Fittings. Not UL Listed below cable O.D " 316
5 Aluminum Wire Mesh Strain Relief Not to be used with stainless steel and nickle plated aluminum CG connectors For Aluminum Cord Connectors Dimensions- mm (in) Weight Per 100 CG-Straight CG-90 A B kg (lb) Catalog Number For Connectors with 3/8 Inch Hubs CG-1238 CG (0.94) (3.63) 2.40 (5.40) CG-SR1 CG-1838 CG (0.94) (4.38) 2.40 (5.40) CG-SR2 CG-3138 CG (0.94) (5.50) 2.40 (5.40) CG-SR3 For Connectors with 1/2 Inch Hubs CG (0.94) (3.63) 5.30 (11.70) CG-SR1 CG (1.25) (4.38) 5.30 (11.70) CG-SR4 CG (0.94) (4.38) 5.30 (11.70) CG-SR2 CG (1.25) (5.50) 5.30 (11.70) CG-SR5 CG (0.94) (5.50) 5.30 (11.70) CG-SR3 CG-3750 CG (1.25) (6.13) 5.30 (11.70) CG-SR6 CG-5050 CG (1.25) (6.88) 5.30 (11.70) CG-SR7 CG-6250 CG (1.25) (9.38) 5.30 (11.70) CG-SR8 For Connectors with 3/4 Inch Hubs CG (1.25) (4.38) 7.30 (16.10) CG-SR4 CG (1.25) (5.50) 7.30 (16.10) CG-SR5 CG (1.38) (4.13) 7.30 (16.10) CG-SR9 CG (1.25) (6.13) 7.30 (16.10) CG-SR6 CG (1.38) (5.50) 7.30 (16.10) CG-SR10 CG (1.25) (6.88) 7.30 (16.10) CG-SR7 CG (1.38) (6.38) 7.30 (16.10) CG-SR11 CG-6275 CG (1.38) (8.38) 7.30 (16.10) CG-SR12 CG-7575 CG (1.38) (9.13) 7.30 (16.10) CG-SR13 For Connectors with 1 Inch Hubs CG (1.38) (5.50) 8.50 (18.70) CG-SR10 CG (1.38) (6.38) 8.50 (18.70) CG-SR11 CG (1.38) (8.38) 8.50 (18.70) CG-SR12 CG (1.75) (9.06) 8.50 (18.70) CG-SR14 CG CG (1.75) (9.06) 8.50 (18.70) CG-SR15 CG CG (1.75) (7.94) 8.50 (18.70) CG-SR16 CG CG (1.75) (7.94) 8.50 (18.70) CG-SR17 For Connectors with 1-1/4 Inch Hubs CG (1.75) (9.06) 9.70 (21.40) CG-SR15 CG (2.13) (8.94) 9.70 (21.40) CG-SR18 CG (1.75) (7.94) 9.70 (21.40) CG-SR16 CG (2.13) (7.94) 9.70 (21.40) CG-SR19 CG CG (2.13) (8.69) 9.70 (21.40) CG-SR20 CG CG (2.13) (9.31) 9.70 (21.40) CG-SR21 CG CG (2.13) (11.56) 9.70 (21.40) CG-SR22 CG CG (2.13) (10.81) 9.70 (21.40) CG-SR23 317
6 Aluminum Wire Mesh Strain Relief Not to be used with stainless steel and nickle plated aluminum CG connectors Steel Cord Connectors Dimensions- mm (in) Weight Per 100 CG-Straight CG-90 A B kg (lb) For Connectors with 3/8 Inch Hubs Catalog Number CG-1238S CG S (0.94) (3.63) 2.40 (5.40) CG-SR1S CG-1838S CG S (0.94) (4.38) 2.40 (5.40) CG-SR2S CG-3138S CG S (0.94) (5.50) 2.40 (5.40) CG-SR3S For Connectors with 1/2 Inch Hubs CG-1250S (0.94) (3.63) 5.30 (11.70) CG-SR1S CG S (1.25) (4.38) 5.30 (11.70) CG-SR4S CG-1850S (0.94) (4.38) 5.30 (11.70) CG-SR2S CG S (1.25) (5.50) 5.30 (11.70) CG-SR5S CG-3150S (0.94) (5.50) 5.30 (11.70) CG-SR3S CG-3750S CG S (1.25) (6.13) 5.30 (11.70) CG-SR6S CG-5050S CG S (1.25) (6.88) 5.30 (11.70) CG-SR7S CG-6250S CG S (1.25) (9.38) 5.30 (11.70) CG-SR8S For Connectors with 3/4 Inch Hubs CG-1275S (1.25) (4.38) 7.30 (16.10) CG-SR4S CG-2575S (1.25) (5.50) 7.30 (16.10) CG-SR5S CG S (1.38) (4.13) 7.30 (16.10) CG-SR9S CG-3775S (1.25) (6.13) 7.30 (16.10) CG-SR6S CG S (1.38) (5.50) 7.30 (16.10) CG-SR10S CG-5075S (1.25) (6.88) 7.30 (16.10) CG-SR7S CG S (1.38) (6.38) 7.30 (16.10) CG-SR11S CG-6275S CG S (1.38) (8.38) 7.30 (16.10) CG-SR12S CG-7575S CG S (1.38) (9.13) 7.30 (16.10) CG-SR13S For Connectors with 1 Inch Hubs CG-37100S (1.38) (5.50) 8.50 (18.70) CG-SR10S CG-50100S (1.38) (6.38) 8.50 (18.70) CG-SR11S CG-62100S (1.38) (8.38) 8.50 (18.70) CG-SR12S CG S (1.75) (9.06) 8.50 (18.70) CG-SR14S CG-75100S CG S (1.75) (9.06) 8.50 (18.70) CG-SR15S CG-87100S CG S (1.75) (7.94) 8.50 (18.70) CG-SR16S CG S CG S (1.75) (7.94) 8.50 (18.70) CG-SR17S For Connectors with 1-1/4 Inch Hubs CG-75125S (1.75) (9.06) 9.70 (21.40) CG-SR15S CG S (2.13) (8.94) 9.70 (21.40) CG-SR18S CG-87125S (1.75) (7.94) 9.70 (21.40) CG-SR16S CG S (2.13) (7.94) 9.70 (21.40) CG-SR19S CG S CG S (2.13) (8.69) 9.70 (21.40) CG-SR20S CG S CG S (2.13) (9.31) 9.70 (21.40) CG-SR21S CG S CG S (2.13) (11.56) 9.70 (21.40) CG-SR22S CG S CG S (2.13) (10.81) 9.70 (21.40) CG-SR23S 318
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
Liquid Tight. Liquid Tight Connectors Reusable Fittings. Straight Connectors. Straight Connectors with Insulated Throat
Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing washer Bonds conduit to box or enclosure Corrosion resistant
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
AMERICAN FITTINGS Corporation
AMERICAN FITTINGS Corporation Conduit Fittings Flexible Cord Rigid/IMC Liquid Tight EMT Wire Mesh Think American USA Made Since 1946 2009 Edition PLEASE NOTE THIS CATALOG IS BEING UPDATED AND SHOULD BE
INCREASED SAFETY ALUMINUM CORD CONNECTORS
INCREASED SAFETY ALUMINUM CONNECTORS S108-EX (See page F86) Use to secure and seal cords or cables entering enclosures or raceways. Series connectors are also suitable for use in hazardous locations per
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Wire Mesh. Flexible Cord. Liquid Tight Mesh Grips for Flexible Metal Conduit STR GT Series
58 We have taken our excellence and combined quality steel mesh to create the best grips in the industry. American Fittings cable grip and cord grip bodies are safe and strong in any industrial environment.
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
Plugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
DEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets
1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and
Non-Metallic Weatherproof Boxes, Covers and Lampholders
Non-Metallic Weatherproof oxes, s and Lampholders pplications Marine rated boxes and covers are ideal for use in highly corrosive areas, beaches, docks, pools, or other wet location areas. Use in branch
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
TCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
Index. Flexcor Wire Mesh Grips K-1
Fittings available in male straight, female straight, 45 and 90 designs for fast installation in all kinds of applications. Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
Cable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
Contender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw.
Contender Series Factory Sealed Control Stations and Pilot Lights Furnished with Internal Ground Screw. Applications Push buttons and selector switches are used in conjunction with contactors or magnetic
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
General Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
20A & 30A IEC 309 Watertight pin & sleeve devices
AH430R7W AH430C7W IP69K certified AH430P7W Product Description - North American 20A & 30A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve plugs features & benefits
Applications. Separate sealing chamber and switch construction. Used on 20 Amp 4-way and all 30 Amp models.
Contender Series Factory Sealed Front Operated Tumbler Switches Malleable Iron Body and Cover. Furnished with Internal Ground. NEMA 3, 7CD, 9EFG Applications Designed to prevent arcing of enclosed switches
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect
R49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
A. General: Deliver, store and handle wire and cable in accordance with the manufacturer's instructions and as specified in Division 1.
SECTION 16120 WIRES AND CABLES 600 VOLTS AND BELOW PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing all wires and cables rated at 600 volts and below for complete electrical systems
americanfittingscorp.com t: e:
Reusable Fittings / Straight Connectors Size Range: 3/8 to 5 Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing
MC, MCX & TCX Series ARMORED & UNARMORED CABLE GLANDS. Innovated Reliable Connectivity
MC, MCX & TCX Series RMOR & UNRMOR CBL GLNS Innovated Reliable Connectivity KILLRK Z H LO C MC SRIS LUMINUM CBL CONNCTORS MC Class II, iv. 1 & 2, Groups, F, G Class III Class I, Zone 2, Group IIC, Zone
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Controls CONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SWITCHES
Straight Blade Plugs and Connectors
Straight Blade I Hospital rade I-1 I-4 Industrial Specification rade I-5 I-9 Industrial Specification rade Flanged Inlets and Outlets I-10 Insulated Straight Blade I-11 atertight Straight Blade I-12 atertight
HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending
HP20 Series Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
R49 & R24 PRODUCT GUIDE
PRODUCT GUIDE Amphenol EEC, Inc. 4050 N Rockwell St Chicago IL 60618 USA P 773.463.8343 F 773.463.8344 W eecchicago.com 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Product Overview Features Spotlight
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
Arrow Hart. environment devices. Watertight, severe duty and corrosion resistant devices for harsh industrial environments
Eaton's Arrow Hart Complex environment devices Complex environment devices, severe duty and corrosion resistant devices for harsh industrial environments Arrow Hart NEMA and Non-NEMA quick reference guide
STRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
Industrial grade L14-30 locking devices
Description AHL1430P AHL1430R AHL1430C AHL1430FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust and debris Back wire terminal clamps for easy secure wiring
Conduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
Energy Supply Systems C-RAIL PROGRAM. KAT a-USA
Energy Supply Systems C-RAIL PROGRAM 230 KAT0230-0001a-USA C-Rails and Accessories C-Rails Catalog No. Length l Thickness s [mm] [mm] 023200-6M 6000 023200-4M 4000 023201-6M 6000 023201-4M 4000 2 1.5 6,,
16A & 32A IEC 309 Watertight pin & sleeve devices
Technical Data IEC 309 Product Description - International ; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding AH416R6W AH416C6W AH416P6W Pin & sleeve plugs features & benefits
Industrial grade L15-30 locking devices
Technical Data Industrial grade L15-30 locking devices Description AHL1530P AHL1530R AHL1530C AHL1530FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
Roughneck Single- Conductor Connectors. The ultimate performance solution, built to take heavy abuse under the most extreme conditions.
Roughneck Single- Conductor Connectors The ultimate performance solution, built to take heavy abuse under the most extreme conditions. Roughneck Applications, Features & Benefits High-amperage connectors
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
IEC 309 Plugs, Connectors, Receptacles, and Inlets
IEC 309 Plugs, Connectors, Receptacles, and Inlets Applications: Where complete protection against dirt, dust, and water jets is required In damp or corrosive locations In areas prone to vibration, hard
Hart lock industrial grade 50A locking devices
Technical Data Hart lock industrial grade 50A locking devices 3-pole, 4-wire grounding 50A, 125/250V/AC, 3Ø, 250V/AC Non-NEMA, California standard X W G G W X Receptacle Plug CS6365EX Design features for
SBP2 Pendant Pushbutton Stations Installation Instructions
SBP2 Pendant Pushbutton Stations Installation Instructions P.O. Box 13615 Milwaukee, WI 53213-3615 Phone: 262-783-3500 Fax: 262-783-3510 Toll free Phone (in USA): 800-288-8178 Toll free Fax (in USA): 800-298-3503
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
Cam-Lok Single Pole Connectivity. The industry standard for reliable service under the most severe operating conditions.
Cam-Lok Single Pole Connectivity The industry standard for reliable service under the most severe operating conditions. Cam-Lok Single Pole Connectivity Cam-Lok connectors are the industry standard Cam-Lok
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Industrial grade L6-30 locking devices
Technical Data Industrial grade L6-30 locking devices Description AHL630P AHL630R AHL630C AHL630FO Design features for plug & connector All nylon construction EPDM gasket seals cord hole from dust and
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
EDS Factory Sealed Tumbler Switches UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D NEMA 7 B CD, 9EFG Applications Designed to prevent arcing of enclosed switches
HD30 & HDP20 Series. Contents. Mounting 88. Overview. Dimensions 80. How To Instructions Part Numbering System 81. Configurations 82-83
HD30 & HDP20 Series Contents HD30 & HDP20 Series Overview 80 Mounting 88 Dimensions 80 How To Instructions 89-90 Part umbering System 81 Configurations 82-83 Wire Insulation 83 Special Modifications 84-85
Division 2 Contender Series Factory Sealed Control Stations
NEMA 3, 3R, 4, 4X, 12 IP66 Applications For use in washdown areas and other damp, wet and highly corrosive areas. Push buttons and selector switches are used in conjunction with contactors or magnetic
INSULGRIP Plugs and Connectors
INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors Technical Information HBL5266C HBL5269C INSULRIP Plugs and Connectors Specifications Plug Part Description Typical Specification Catalog No.
Washdown Industrial/Light Marine UniGuard
Safety, Performance and Durability in a Snap! Beverage Plants Construction Sites Food Processing Marine and Shipboard Pulp and Paper Mills Chemical Plants Extensive Product Family Safe and reliable, portable
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
Ground Connectors All Copper Alloy Specification Grade
Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right
Covers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
Cable and Cord Fittings Hazardous and Non-Hazardous
Cable and Cord Fittings Hazardous and Non-Hazardous 5F Description Page No. Description Page No. Application/Selection 62, 63 Cable/Conduit Sealing Devices Thru-Wall Barrier TW Series 101-106 Link Seal
NATURAL HIGH IMPACT STRENGTH COPPER FREE ALUMINUM Number of Wires VAC AT 50 TO 400 HZ/250 VDC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com AR331 30 Amp Pin & Sleeve Recpt 3-W 3-P 250VDC/600vac Cooper Crouse-Hinds Catalog Number
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
Taxonomies, Classifications, and Categories CIRCUIT BREAKING, COMPRESSOR, CONVEYOR, MOTOR GENERATOR SET, POLARIZED, WELDER
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AP20467S22 3W-4P 200A Plug Cooper Crouse-Hinds Catalog Number AP20467S22 Manufacturer Cooper Crouse-Hinds Description
Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
Features. North & South America: Europe / Africa / Middle East: Asia Pacific:
PIG-SIG V Scraper Passage Indicator Optional mounting system available Bulletin No: 5110.003.09 Version: 11.2015 Supersedes: 5110.003.08 (03.2015) ECN: E006726 Options Available options: Flag Indicator
CTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems
Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required
THHN10STBRCP1250 THHN 10 STR Brown 1250 CP
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 THHN10STBRCP1250 THHN 10 STR Brown 1250 CP Southwire Company Catalog Number THHN10STBRCP1250 Manufacturer Southwire Company
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to