Vehicle Fitment Guide Please complete the Vehicle Fitment Guide in its entirety and either or Fax to Billet Specialties.

Transcription

1 Vehicle itment Guide Please complete the Vehicle itment Guide in its entirety and either mail or ax to illet Specialties. mail: ax: USTOMR ORMTO: ame: Phone: ax: mail: TORY V ORMTO: Make: Year: W RW W Model: Option Package: ROT SUSPSO: RR SUSPSO: actory ftermarket actory ftermarket Modifications: Modifications: rakes isc Steel Rotors rum actory rakes arbon-eramic Rotors rakes isc Steel Rotors rum actory rakes arbon-eramic Rotors Template #: Template #: ROT W: Wheel Size Tire Size olt ircle Offset ackspace: RR W: Wheel Size Tire Size olt ircle Offset ackspace: Stud Size: ug Seat: 7/16 1/2 Stud Size: 7/16 1/2 12mm x mm x mm x mm x 1.5 Other: Other: all one ug Seat: all one

2 OTS:

3 ROT W: R R R G s the bolt pad area recessed? Yes o f yes-measure bolt pad diameter RVR PSSGR RVR PSSGR Mounting Surface to irst Obstruction on rame Side Mounting Surface to inside of ender Mounting Surface to outside of ender ub iameter ub ength rom Mounting Surface enter of hub to ighest Point of aliper enter of hub to owest Point G of aliper Protrusion of caliper past mount surface enter of hub to first step on caliper (if any) ace of aliper to aliper ridge (if any) Recessed olt pad ia. ender eight from enter of ub TR U T: Some Vehicles are equipped with a hub that has multiple tabs to center a wheel onto the hub/rotor assembly as shown on the illustration. Occasionally a drive axle and or axle nut may extend beyond the tabs. f the vehicle being measured falls into this exception fill out this section and provide a photo of the hub(s) as well. ub iameter ub ength rom Mounting Surface ub without axle xle ength from M Mounting Surface M ub with axle protrusion

4 OTS:

5 RR W: G Mounting Surface to irst Obstruction on rame Side Mounting Surface to inside of ender Mounting Surface to outside of ender ub iameter ub ength rom Mounting Surface enter of hub to ighest Point of aliper enter of hub to owest Point of aliper RVR PSSGR R R R G Protrusion of caliper past mount surface enter of hub to first step on caliper (if any) s the bolt pad area recessed? ace of aliper to aliper ridge (if any) Recessed olt pad ia. ender eight from enter of ub Yes o f yes-measure bolt pad diameter PRG R: f the parking brake caliper dimensions exceed the main caliper dimensions it may affect wheel fitment. Please provide those dimensions as well by listing alongside the main caliper dimensions. O P Q R enter of hub to ighest Point of aliper enter of hub to owest Point of aliper Protrusion of caliper past mount surface enter of hub to first step on caliper (if any) ace of aliper to aliper ridge (if any) O Q R Q O P TR U T: Some Vehicles are equipped with a hub that has multiple tabs to center a wheel onto the hub/rotor assembly as shown on the illustration. Occasionally a drive axle and or axle nut may extend beyond the tabs. f the vehicle being measured falls into this exception fill out this section and provide a photo of the hub(s) as well. ub iameter ub ength rom Mounting Surface xle ength from M Mounting Surface ub without axle M ub with axle protrusion

6 OTS:

7 W MSURG ORMTO & TRMOOGY The following information can be used to gather measurements to ensure a proper fit for most applications UG UT TORQU SPTOS MSURG RM STU SZ TORQU RTG STU SZ TORQU RTG 7/ ft.lbs. 10mm ft.lbs. 1/ ft.lbs. 12mm ft.lbs. 9/ ft.lbs. 14mm ft.lbs. 5/ ft.lbs. 16mm ft.lbs. Offset enter ine MSURG UG PTTR 5 UG 6 UG 8 UG Wheel iameter ub ength enterbore (ub ia.) ackspace rom back side of the top stud to the center of the second stud. rom center of the top stud to center of the second stud directly across. aliper learance MSURG RS / PRS isted Rim Width Overall Width rake eight enter of axle to top of caliper TRMOOGY aliper learance - The amount of space available for a brake caliper, measured from the mounting surface to the backside of the wheel center. aliper Protrusion Past Mounting Surface ub ength ub iameter ackspace - Offset - enterbore - isted Rim Width - Overall Width - Measured from the mounting surface of the wheel to the back edge of the rim. The distance from the hub mounting surface to the center line of the wheel measured in millimeters. The machined opening in the center of the wheel that allows the hub to pass through. Measured from beadseat to beadseat. Measured from the outside edge to outside edge of a rim and is 1 larger then the isted Rim Width. xample: 17x8 (listed) will have an overall width of 9.