Brake Lathe Packages and Accessories For Hunter OCL Series and BL500 Brake Lathes

Transcription

1 rake Lathe Packages and ccessories For Hunter OL Series and L500 rake Lathes Includes adaptors to service most passenger car, light truck and medium-duty applications!

2 ccessory Index On-ar Lathes OL410/OL430M/OL360 Lathe Packages... 3 Standard ccessories daptor Kits & ccessories LT-PRO ccessory Kit... 7 Medium-uty daptors... 9 (For use with OL430M only) Lug Nut Kits...10 (For use with medium-duty adaptors) ench Lathes L505/L501 Lathe Packages igi-al* Measurement System Standard ccessories HunterPro daptor Kits " rbor Kits & ccessories /8" rbor Kits & ccessories /16" rbor Kits & ccessories Silencers General Purpose Inserts & Tool Holders OL410 daptor Packages igi-al* uto Measurement aliper ust ontainment System L505/L501 Hubless daptor Kits * Patented

3 On-ar Lathe Packages OL410 / OL430M On-ar rake Lathes OL410 Lathe Package Package contains on-car brake lathe with Pro-omp computerized compensation**, Trolley daptor Storage racket ( ), Swiveling hip Tray ( ) and standard accessories. daptors are NOT included. uild the OL400 On-ar Lathe Package to match your service needs. Select a required adaptor kit from the list below to service most passenger cars, light trucks and some commercial vehicles (See pgs. 6-7). dditional adaptors are available to customize the package (See pgs. 8-10). OL daptor Level I ( ) Passenger ar daptor Kit OL daptor Level II ( ) Passenger ar and Light Truck daptor Kit OL daptor Level III ( ) Passenger ar, Light- and Medium-uty Truck daptor Kit OL430M with standard accessories. OL430M Lathe Package Includes medium-duty on-car brake lathe and standard accessories. daptors are NOT included. Individual adaptors can be ordered to match your service needs, including use for passenger car and light truck applications. Individual flange adaptors are available! See pages 8-9 Standard OL Lathe Packages OL410 Includes on-car brake lathe with Pro-omp computerized compensation and Standard ccessory Kit. oes NOT include chip tray, trolley adaptor, or storage bracket. OL410-LT-PRO Includes on-car brake lathe with Pro-omp computerized compensation, Standard ccessory Kit and LT-PRO Kit (TN-921). Includes Trolley daptor Storage racket ( ) and Swiveling hip Tray ( ). The ial Indicator Kit is not necessary for use with the OL400 packages. ** Patent Pending 3

4 Standard ccessory Package OL410 On-ar rake Lathes Included with purchase of OL410 Models.. Trolley Stand & Support Structure For OL400 (pictured at right)... RP For OL RP Lug Single Piece Flange x 98mm, 4 x 100mm, 4 x 4.00", 4 x 4.25", 4 x 110mm, 4 x 4.50", 4 x 120mm. 5 Lug Single Piece Flange x 100mm, 5 x 4.25", 5 x 110mm, 5 x 112mm, 5 x 4.50", 5 x 115mm, 5 x 120mm, 5 x 4.75". ccessory Kit Includes storage box, spacer washers and lug nuts for use when existing lug nuts do not clear universal adaptor attachment bolts. Includes: Lug Nut, 1/2"-20 (4 ea.) Lug Nut, 12 x 1.5mm (4 ea.) Lug Nut, 9/16"-18 (5 ea.) Lug Nut, 14mm x 1.5mm (4 ea.) Lug Nut, 12mm x 1.25mm (4 ea.) Lug Nut, 7/16"-20 (4 ea.) Lug Nut, 14mm x 2.0mm (4 ea.) Lug Nut, 12 x 1.75mm (4 ea.) E. Safety Glasses F. Tool, 22 mm Socket Wrench... RP G. Micro-Round Insert Kit H. Tool Holder,... RP R RH ual-sided, Round/Triangular I. Tool Holder,... RP L RH ual-sided, Round/Triangular J. Tool, 6 mm T-Wrench... RP K. Tool, 8 mm Hex Key L. Tool, 8 mm Wrench M. Shaft Extension (tube)... RP Knob... RP Rod... RP E M OL410 LT-PRO with standard trolley. G H Not Pictured: Spacer Washers Precision machined spacer washers are placed under flange adaptor when neccesary, to clear studs with tall shoulders or hubs with exposed bolts. (4 ea.) I F J L K 4

5 Standard ccessory Package OL430M On-ar rake Lathes Included with purchase of OL430 Models.. Lathe and Trolley. Safety Glasses Tool, 22 mm Socket Wrench... RP Micro-Round Insert Kit E. Tool Holder, RH Rotor... RP R for Micro-Round Insert F. Tool Holder, LH Rotor... RP L for Micro-Round Insert G. Tool, 6 mm T-Wrench... RP H. Tool, 8 mm Wrench I. Shaft Extension (tube)... RP Knob... RP Rod... RP E F G OL430M with standard trolley. H I See page 10 for Lug Nut selection 5

6 daptor Kits & ccessories OL410 On-ar rake Lathes Extended Twin utter Tool ssembly ( ) This kit greatly expands the diameter and offset capacity of OL410/360 rotor lathes to service deep-offset rear rotors like those found on dual wheel 1-ton and mediumduty trucks. Service rear rotors with integral parking brakes commonly found in late model trucks, saving substantial labor expense and helping prevent possible damage by eliminating the need to remove the rotor. uild an OL410 Lathe Package to match your service needs by selecting a required adaptor kit from the list below. The adaptor kits (Levels I through III) may also be used to upgrade any existing OL lathe. OL410 PTOR KIT LEVEL I ( ) onsists of two adaptors with coverage for a wide range of applications fitting most passenger car and some light truck 4x2 rotors.. 4-Lug Flange daptor Lug Flange daptor OL410 PTOR KIT LEVEL II ( ) onsists of seven adaptors with coverage for a wide range of applications fitting most late model passenger car and light truck 4x2 and 4x4 rotors including most 1-ton-sized vehicle applications.. Flange daptor Flange daptor Flange daptor... RP x 135mm, 5 x 130mm, 5 x 150mm. Flange daptor... RP x 135mm, 6 x 4.50", 6 x 115mm E. Flange daptor... RP x 6.50", 8 x 6.50", 8 x 170mm E F G F. Flange daptor... RP x 5.00", 6 x 5.00" G. Flange daptor... RP x 5.50", 5 x 5.50", 6 x 5.50" 6 See Form 5144T for application guide and adaptor bolt circles for specific vehicle fitment details.

7 OL410 PTOR KIT LEVEL III ( ) onsists of eleven adaptors with coverage for a wide range of applications fitting most passenger car, light truck and 4x2 and 4x4 rotor applications including 1-ton-sized vehicle applications.. Flange daptor Flange daptor Flange daptor... RP x 130mm, 5 x 135mm, 5 x 150mm. Flange daptor... RP x 135mm, 6 x 4.50", 6 x 115mm E. Flange daptor... RP x 5.50", 5 x 5.50", 6 x 5.50" F. Flange daptor... RP x 6.50", 8 x 6.50", 8 x 170mm G. Flange daptor... RP x 5.00", 6 x 5.00" E F G H I J H. Flange daptor... RP x 5.50", 5 x 5.50", 6 x 5.50" I. Flange daptor... RP x 6.50", 8 x 6.50", 8 x 170mm J. Flange daptor... RP x 225mm, 10 x 7.25" LT-PRO daptor Kit OL410 On-ar rake Lathes The optional LT-PRO Kit enables the servicing of most passenger cars and light trucks up to and including 1-ton ratings. The kit includes a complete line of lightduty truck and passenger car adaptors.. Flange daptor... RP x 135mm, 5 x 130mm, 5 x 150mm. Flange daptor... RP x 135mm, 6 x 4.50", 6 x 115mm. Flange daptor... RP x 225mm, 10 x 7.25". Flange daptor... RP x 5.50", 5 x 5.50", 6 x 5.50" E E. Flange daptor... RP x 6.50", 8 x 6.50", 8 x 170mm F. Flange daptor... RP x 5.00", 6 x 5.00" F 7

8 daptor Kits & ccessories OL410 / OL430M On-ar rake Lathes Passenger ar & Light Truck daptors ( ) ( ) (RP ) (RP ) 4 x 98mm, 4 x 100mm, 4 x 4.00", 4 x 4.25", 4x110mm, 4 x 4.50", 4 x 120mm cura, lfa, udi, MW, hrysler, Fiat, Ford, GM, Honda, Hyundai, Infiniti, Jeep, Peugeot, Mazda, Mitsubishi, Nissan, Porsche, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen, Yugo 5 x 100mm, 5 x 4.25", 5 x 110mm, 5 x 112mm, 5 x 4.50", 5 x 115mm, 5 x 120mm, 5 x 4.75" cura, lfa, udi, MW, adillac, hrysler, Ford, GM, Honda, Infiniti, Jeep, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Porsche, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen 4 x 5.50", 5 x 5.50", 6 x 5.50" hrysler 4x4 s, Ford, GM, Isuzu, Lexus 4x4 s, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota. Recommended for late model 4x4 with non-protruding hubs. 5 x 5.00", 6 x 5.00" hrysler 4x4 s, Ford, GM, RW Passenger ars & Light-Trucks. Recommended for late model 4x4 with non-protruding hubs. (RP ) (RP ) (RP ) (RP ) 5 x 130mm, 5 x 135mm, 5 x 150mm 6 x 4.50", 6 x 115mm, 6 x 135mm 4 x 5.50", 5 x 5.50", 6 x 5.50" 6 x 6.50", 8 x 6.50", 8 x 170mm Ford Expedition / F-Series, Lexus LX470, Navigator, Porsche, Toyota 4x4 SUV, Landcruiser and Sprinter Ford Expedition / 03 F-150, Lincoln Navigator hrysler 4x4 s, Ford, GM, Isuzu, Lexus 4x4 s, Mazda, Mitsubishi, Subaru, Suzuki, Toyota. Recommended for early 4x4 with protruding hubs. hrysler, ana xle 4x4 s, Ford Excursion / F-250 S / F-350 S, GM, Jeep. Recommended for late model 4x4 with non-protruding hubs. (RP ) (RP ) (RP ) 5 x 6.50", 5 x 155mm 8 x 6.50", 8 x 170mm, 7 x 150mm 6 x 6.5", 8 x 6.5", 8 x 170mm entley, efender, iscovery, Land Rover, Range Rover, Rolls-Royce hrysler uallies 4x2 s, odge 3/4- and 1-Ton 4x4 s, Ford, GM Ford F-250 / F-350 SRW / F-350 RW / F-450 / F-550 S, hrysler and GM 3/4-ton pickups 8

9 Medium-uty daptors (RP ) (RP ) (RP ) (RP ) 8 x 225mm, 10 x 7.25" 6 x 222mm, 5 x 203mm 6 x 8.75", 10 x 8.75" 8 x 225mm, 10 x 225mm Ford F-450 / F-550 S and GM 3500 H (front axle) Isuzu medium-duty truck (front axle) Ford F-450 / F-550 S / F-350 RW, imported sian M trucks, M/ H truck applications Ford F-450 / F-550 S / F-350 RW, M/H truck applications, hrysler (RP ) (RP ) (RP ) (RP ) 8 x 275mm 8 x 285mm, 10 x 11.25" 10 x 335mm 10 x 7.25", 8 x 200mm M truck applications us service, H trucks, imported sian M trucks, M/H truck applications (front axle) H truck applications Ford F-450 / F-550 S / F-350 RW, GM / GM P300 / P-Series (rear axle) (RP ) (RP ) (RP ) 10 x 11.25", 8 x 285mm 6 x 130mm, 6 x 132mm 6 x 205mm uick / odge truck / GM / Saturn / Sprinter Mercedes / odge / Sprinter 9

10 Recommended Lug Nut Kits for use with OL430M daptors OL430M Lug Nut daptor options Lug Nuts Kit ( ) 5/8"-18 includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 3/4"-16 includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 15/16"-12 includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 20mm x 1.5mm includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 22mm x 1.5mm includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 11/16"-16 includes (set of 4) Lug Nut ( ) Each Lug Nut Kit includes 4 lug nuts. Lug Nuts Kit ( ) 9/16"-18 includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 14mm x 1.5mm includes (set of 4) Lug Nut ( ) Lug Nuts Kit ( ) 14mm x 2mm includes (set of 4) Lug Nut ( ) Lug Nut application chart olt circles Vehicle applications ommon wheel stud size daptor 6 x 8.75" sian M Truck M20x1.5 RP x 8.75" M Truck 3/4"-16 RP x 6.50" M Truck 5/8"-18 or M14 x 1.5 RP / x 6.50" M Truck M14 x 1.5 RP / x 6.50" Ford F-250 / F-350 5/8"-18 RP / x 170mm Ford F-450 / 550S / F-350 M14x2.0 RP / x 225mm Ford F450 / 550S / F-350 M14x2.0 RP x 275mm M Truck M20x1.5 or M22x1.5 RP x 285mm Imported sian Truck M20x1.5 or M22x1.5 RP / x 6.50" Ford F-250 / F-350 SRW 5/8"-18 RP x 275mm M Truck M22 x 1.5 RP x 275mm M Truck M20x1.5 RP x 7.25" GM / GM P300 / PSeries 5/8"-18 RP x 7.25" Ford F-450 / 550S / F-350 5/8"-18 RP x 8.75" Medium / Heavy-uty 3/4"-16 RP x 8.75" hevrolet GM 1-1/2 to 2-Ton 11/16"-16 RP x 8.75" Medium / Heavy-uty Lug = 3/4"-16 RP x 225mm Medium / Heavy-uty F Lug = M22 x 1.5 RP x 11.25" us Service 3/4"-16 or 11/16"-16 RP / x 11.25" Medium / Heavy-uty 3/4"-16 RP / x 11.25" H Truck M22 x 1.5 RP / x 11.25" us Service, M / H 3/4"-16 or 11/16"-16 RP / x 11.25" Medium / Heavy-uty 3/4"-16 RP / x 11.25" Medium / Heavy-uty M22 x 1.5 RP / x 11.25" H Truck M22 x 1.5 RP / x 335mm H Truck 15/16"-12 RP x 335mm H Truck M22 x 1.5 RP x 335mm H Truck 15/16"-12 RP x 335mm H Truck M22 x 1.5 RP Lug nut sets should only be used with the adaptors and not used on wheels with flat washer designs. 10

11 ench Lathe Packages L505 / L501 ench Lathes HunterPro Lathe Packages L505-* HunterPro Lathe Package With ench Includes L505 combination brake lathe, bench with backboard, chip tray, storage hooks and Standard HunterPro ccessory Kit ( ). daptors are NOT included. L505-* HunterPro Lathe Package Package contains combination brake lathe and Standard HunterPro ccessory Kit ( ). daptors are NOT included. uild a HunterPro Lathe Package to match your service needs. Select a required adaptor kit from the list below to service most rotors, drums and flywheels (See pgs ). HunterPro Level I ( ) Passenger ar daptor Kit HunterPro Level II ( ) Passenger ar & Light Truck daptor Kit Quickhuck Level III ( ) Passenger ar, Light- & Medium-uty Truck daptor Kit HunterPro Level IV ( ) Passenger ar, Light- & Medium-uty Truck daptor Kit L505- shown with Level IV daptor Kit and optional storage drawer. Standard Lathe Packages L505-* Lathe With ench and asic daptors ( ) Includes combination brake lathe, bench with backboard, chip tray, storage hooks and Standard ccessory Kit. L505* Lathe With asic daptors ( ) Includes combination brake lathe with Standard ccessory Kit. dditional Options Lathe bench with backboard ( ) Includes chip tray, storage hooks and literature holder (if ordered separately). Optional bench drawer ( ) dd additional storage space to your bench with an optional drawer. Easily bolts in place. Single-speedlathes are also available and can be ordered by requesting L501 instead of L505. For additional information on Hunter s L500 Series ench Lathes, see Form 3937-T. * To order Hunter s igi-al measurement option, add after the model number. (e.g., L505-) (see pg. 12) 11

12 igi-al Measurement Option L505 / L501 ench Lathes igi-al is a factory installed option. Measures rotor thickness igi-al* uto Measurement aliper Instantly measures drum or rotor dimensions utomatically measures thickness of rotor, diameter of drum and calculates total indicated runout etermines depth of cut accurately and quickly Eliminates math errors and excess material removal onfidently perform one-cut operation alibration routine takes just seconds Measures drum diameter Quick calibration with provided tool HunterPro Lathe ccessories L505 / L501 ench Lathes Hubless daptor Kits HunterPro daptors* enable technicians to quickly set up and accurately resurface automotive hubless and composite rotors and drums Large banded spacers provide more mass, which reduce harmonic vibration and chatter, producing a superior surface finish vailable in utomotive, Light Truck and Larger Light Truck Sets (See pgs ) Wrenchless Self-ligning Nut* ( ) ombines the functions of a self-aligning brake lathe arbor spacer and a hand-tightening brake lathe arbor nut Eliminates the problem of over-torquing the arbor nut on rotors or drums 12 * Patented Included standard with L505- and L505- Lathe Packages.

13 Standard ccessory Packages L505 / L501 ench Lathes Included with purchase of all L505/L501 models. Standard HunterPro Package ccessories. rbor, 1" (L505) HunterPro Wrenchless Self-ligning Nut elt, Micro-V 26" Eye Shield, Lamp Mounted E. Safety Glasses F. Tool, 5/16" Wrench G. Tool, 1" and 1-3/8" Wrench H. Inserts, Positive Rake (0.015" Radius Tip), 24-Pack E G F H asic L500 Series Standard ccessories. lamp up, 5.75" (2 ea.) lamp up, 4.50" (2 ea.) Silencer, rum and elt, Micro-V 26" E. Tool, 1" and 1-3/8" Wrench F. Tool, 5/16" Wrench G. Safety Glasses H. Silencer, Vented Rotor, Spring-Type I. Silencer, Rotor Solid J. Spacer, 0.50" K. Spacer, 1.00" L. Spacer, 4.00" M. Eye Shield, Lamp Mounted N. ual Taper daptor, 1.10" 1.60" O. ual Taper daptor, 1.20" 1.70" P. ual Taper daptor, 1.60" 2.10" Q. ual Taper daptor, 1.90" 2.50" M E F S J N O P X T K R. ual Taper daptor, 2.30" 2.90" S. one, 1.44" 2.75" T. one, 2.75" 3.25" U. one, 3.06" 4.00" V. Spring W. Silencer, lip-on isc and hip eflector X. Inserts, Positive Rake (0.015" Radius Tip), 4-Pack Y. rbor, 1", L Z. rbor Nut, 1" (not shown) G L U Q R H V Y I W ccessory kits shown also apply to Hunter s L501 Lathes. 13

14 HunterPro daptor Kits & ccessories L505 / L501 ench Lathes uild the HunterPro Lathe Package to match your service needs by selecting a required adaptor kit from the list below. The adaptor kits (Levels I through IV) may also be used to upgrade any existing lathe using a 1" arbor. L505 shown with optional Wrenchless Self-ligning Nut LEVEL I HunterPro Passenger ar daptor Kit ( ) onsists of hubbed and hubless adaptors covering a wide range of applications fitting most passenger car rotors, drums and flywheels, including composites.. HunterPro utomotive Kit Silencer, rum and Silencer, Solid Rotor, hain-type Silencer, lip-on isc and hip eflector E. Silencer, Vented Rotor, Spring-Type F. Spacer, 0.50" G. Spacer, 1.00" H. Spacer, 4.00" I. ual Taper daptor, 1.10" 1.60" F G H E I J K L M J. ual Taper daptor, 1.20" 1.70" K. ual Taper daptor, 1.60" 2.10" L. ual Taper daptor, 1.90" 2.50" M. ual Taper daptor, 2.30" 2.90" LEVEL II HunterPro Passenger ar & Light Truck daptor Kit ( ) onsists of hubbed and hubless adaptors covering a wide range of applications fitting most passenger cars and light truck rotors, drums and flywheels through 1/2-ton chassis, including composites.. HunterPro utomotive Kit HunterPro Light Truck Kit Silencer, Solid Rotor, hain-type Silencer, lip-on isc and hip eflector E. Silencer, rum and F. Silencer, Vented Rotor, Spring-Type G. Spacer, 0.50" H. Spacer, 1.00" I. Spacer, 4.00" G E H I F J K L M N O P J. ual Taper daptor, 1.10" 1.60" K. ual Taper daptor, 1.20" 1.70" L. ual Taper daptor, 1.60" 2.10" M. ual Taper daptor, 1.90" 2.50" N. ual Taper daptor, 2.30" 2.90" O. ual Taper daptor, 2.70" 3.20" P. ual Taper daptor, 3.10" 3.60"

15 LEVEL III Quickhuck Passenger ar, Light Truck & Larger Light Truck daptor Kit ( ) onsists of hubbed and hubless adaptors and three-jaw chuck mounting system. overs a wide range of applications for most rotors, drums and flywheels for passenger cars, light trucks and larger light trucks.. up, Extra Large, 7.25" up, 5.75" up, 4.50" one, 1.44" 2.75" E. Spring F. Three-Jaw huck Kit G. Jaw Set (Only), Truck Size: 3.63" 5.75" H. Spacer, 0.50" I. Spacer, 1.00" J. Spacer, 4.00" K. daptor, rum, eep 1-ton (3.75" friction surface & wider) L. Silencer, lip-on isc M. Silencer, rum and K L F M P Q R S T U V G N. Silencer, Solid Rotor, hain-type O. Silencer, Vented Rotor, Spring-Type and hip eflector P. ual Taper daptor, 1.10" 1.60" Q. ual Taper daptor, 1.20" 1.70" R. ual Taper daptor, 1.60" 2.10" S. ual Taper daptor, 1.90" 2.50" T. ual Taper daptor, 2.30" 2.90" U. ual Taper daptor, 2.70" 3.20" V. ual Taper daptor, 3.10" 3.60" H N I E O J LEVEL IV: HunterPro Passenger ar, Light-Truck & Larger Light Truck daptor Kit ( ) onsists of hubbed and hubless adaptors covering a wide range of applications for most passenger cars, light truck and larger light trucks, including composites.. HunterPro Light- and Medium-uty Truck Kit HunterPro Light Truck Kit HunterPro utomotive Kit Spacer, 0.50" E. Spacer, 1.00" F. Spacer, 4.00" G. daptor, rum, eep 1-ton (3.75" friction surface and wider) H. Silencer, Vented Rotor, Spring-Type I. Silencer, rum and J. Silencer, Solid Rotor, hain-type K. Silencer, lip-on isc and hip eflector L. daptor, Rotor, 92 urrent 3/4- to 1-ton GM 4W; 94 urrent 3/4- to 1-ton odge 2W and 4W (includes Small one, 1.31" 1.75") H M. ual Taper daptor, 1.10" 1.60" N. ual Taper daptor, 1.20" 1.70" O. ual Taper daptor, 1.60" 2.10" P. ual Taper daptor, 1.90" 2.50" Q. ual Taper daptor, 2.30" 2.90" R. ual Taper daptor, 2.70" 3.20" S. ual Taper daptor, 3.10" 3.60" T. earing Support Flange U. Tool Holder, rum, Med. uty Truck Parking rk. (not shown) I J E G F K L M N O P Q R S T 15

16 rbor Kits & ccessories L505 / L501 ench Lathes 1" rbor Kits HunterPro utomotive Kit* ( ) The ultimate in setup rigidity, this set covers most automotive rotors and drums in service today including most odd configured rotors. Fits most hubless cast/ composite automotive rotors, drums and flywheels.. one, utomotive entering, 1.84" 2.20" one, utomotive entering, 2.12" 2.47" one, utomotive entering, 2.37" 2.75" one, utomotive entering, 2.65" 3.00" E. one, utomotive entering, 2.92" 3.30" F. one, Reversible entering, 2.00" 3.98" E F G H I G. Flange Plate, 4.80" H. Flange Plate, utomotive omposite, 5.43" I. Flange Spring, 1.92" x 1.00" HunterPro Light Truck Kit* ( ) This set covers most light trucks up to 3/4 ton. Fits most hubless cast/composite light truck rotors, drums and flywheels. The set compliments the and must be used together.. one, Lt. Truck entering, 3.20" 3.57" one, Lt. Truck entering, 3.47" 3.85" Flange Plate, Lt. Truck omposite, 7.25" HunterPro Larger Light Truck Kit* ( ) This set covers most larger light trucks up to and including 1-ton and super-duty trucks. Fits most hubless cast/composite light truck rotors, drums and flywheels.. one, Lt. Truck entering, 3.75" 4.12" one, Lt. Truck entering, 4.03" 4.40" one, Lt. Truck entering, 4.30" 4.67" one, Lt. Truck entering, 4.57" 4.95" E. one, Lt. Truck entering, 4.85" 5.22" F. one, Lt. Truck entering, 5.12" 5.50" G. one, Lt. Truck entering, 5.40" 5.75" E H I F G J H. Flange Plate, Large Lt. Truck, 7.25" I. Flange Plate, Large Lt. Truck, 6.50" J. Flange Spring, 1.92" x 1.00" * Patented

17 HunterPro F-150 daptor** ( ) ddresses the 2004 and up Ford F-150 two-wheel-drive 6- and 7-lug front rotors with internal bearings, which are extremely difficult to setup and machine accurately with traditional brake lathe adaptors.. Ford F-150 Flange Plate earing Support Flange HunterPro Rotor daptor* ( ) For hubless cast/composite auto and light truck rotors. overs 90% of rotors in service today. esigned as an entry level or second adaptor set used in busy shops. Fits rotors with hub bore Provides accurate mounting of cast and composite hubless rotors with only two adaptors aptured mounting cone and spacer speeds setup. Ideal for high-volume shops. aptured one and Flange Spacer Flange Spacer Quickhuck daptor Kit ( ) Three-jaw chuck adaptor for hubless drums and rotors with center holes from 2.13 to 4.25 can obsolete all other adaptors for use with hubless drums. It offers the advantage of unparalleled centering ability combined with speed of setup.. Three-Jaw huck daptor without Jaws Jaws Set, Standard Size, 2.13" " (shown installed in Three-Jaw huck). acking Plate, Medium, 5.13" Tool, T-Wrench, Three-Jaw huck Truck Jaw Kit ( ) Truck Jaws for for use in mounting hubless drums and rotors with center holes from 3.63" to 5.75". Must be ordered as a numbered set. * Patented ** Patent Pending 17

18 rbor Kits & ccessories L505 / L501 ench Lathes 1" rbor Kits continued... E Extra-Large up and one Kit ( ) For 1" rbors.. one, 3.88" 4.44" one, 4.13" 4.97" one, 4.83" 5.50" up, Extra Large, 7.25" E. up, Extra Large, 6.25" Self-entering Spacer ( ) ompensates for over-tightening arbor nut and some mounting errors encountered during setups. Hubbed 2W/4W Rotor daptor ( ) 92-current 3/4- to 1-ton GM 4W, 94-current 3/4- to 1-ton odge 2W and 4W; includes Small one, (not shown). Extra-Small rum daptor ( ) For drums smaller than 7" diameter. Includes negative rake insert. ( ) eep 1-Ton rum daptor ( ) Required when turning drums in which the friction surface is wider than ushings Reducer Kit ( ) Required when using 1-7/8" adaptors on 1" arbors. Set of three adaptors. Taper daptor ( ) Required to mount flywheel kit, and pilotless drum kit, Order for L500 models only. 18 * Patented

19 Flywheel daptor Kit ( ) Mounts flywheels with a pilot hole smaller than 1". Includes:. Flywheel one Flywheel ase Requires for L505 or for L500 models only. Extra-Small up: ( ) up, 3.50" 1" rbor x 9.3" ( ) For the L505/501 Series Lathes Extra-Small one: ( ) one, 1.31" to 1.75" 1" rbor x 9.3" ( ) For use with L500 model only (not shown). ench Lathe 1-7/8" rbor Kits Hubbed Heavy-uty Truck daptor Set ( ) For mounting heavy-duty hubbed rotors and drums with center holes from 2.16" to 6.00". ones can also be used for hubless rotors and drums with clamp cups , and spring or /8" rbor Kit required. E. one, 2.16" 3.37" one, 2.25" 3.62" one, 3.60" 4.50" (2 ea.) one, 3.50" 4.87" (2 ea.) E. one, 4.62" 6.00" (2 ea.) Hubless Medium-uty Truck daptor Set ( ) Use for mounting hubless medium-duty items with center holes from 3.83 to or , 1-7/8 rbor Kit required.. one, 3.82" 4.42" one, 4.35" 5.00" lamp up, 6.25" (set of 2) Spring

20 rbor Kits & ccessories L505 / L501 ench Lathes 1-7/8" rbor Kits continued... Hubless Heavy-uty Truck daptor Set ( ) For mounting hubless heavy-duty components with center holes from 4.88" to 8.25" or , 1-7/8" rbor Kit required.. one, 4.88" 5.50" one, 5.44" 6.03" one, 5.97" 6.50" one, 6.50" 7.44" E. one, 7.00" 7.64" F. one, 7.58" 8.17" G. lamp up, 7.25" (2 ea.) H. lamp up, 9.25" (2 ea.) I. Spring E F G H I 1-7/8" rbor Kit ( ) 1-7/8" H rbor Kit for the L505/501.. rbor, 1-7/8" x 17" Tool, Spanner Wrench Nut, 1-7/8" rbor Spacer, 2" E. Spacer, 3" (2 required) /8" rbor Kit ( ) Same as , except the arbor ( ) has a smaller taper for the L500 model (not shown). E 11/16" rbor Kit 11/16" rbor Kit ( ) 11/16" rbor Kit for mounting splined, hubbed rotors without having to remove the sealed bearings (L505).. one, 0.70" to 1.70" Spacer,.75" (2 ea.) Spacer, 1.50" Nut, rbor 11/16" E. rbor, 11/16" 7.13" /16" rbor Kit ( ) Same as except the arbor ( ) has a smaller taper for the L500 model (not shown). E 20

21 Lathe Silencers L505 / L501 ench Lathes Hunter lathe silencers are ideal for damping out resonant vibration that can occur during the machining of drums and rotors.. Silencer, Truck rum Silencer, rum and Standard, Silencer, Vented Rotor and Silencer, Vented Rotor, Spring-Type E. Silencer, Solid Rotor, hain-type* Includes: Silencer, Rotor 7" O-Ring Spring, 0.25" x 2.57" Spring, 0.25" x 3.75" Spring, 0.25" x 4.53" Spring, 0.25" x 6.44" F. Silencer, Rotor Solid, Large G. Silencer, Rotor Solid, Small F G H. Silencer, Rotor, nti-hatter Kit for Solid Rotors Includes: Silencer, Rotor 7" O-Ring Silencer, Rotor 8" O-Ring Silencer, Rotor 9" O-Ring Silencer, Rotor, Solid, Magnetic ands (set of 3) I. Silencer, lip-on isc and hip eflector H I E Inserts & Tool Holders OL400 / OL430M / OL360 & L505 / L501 rake Lathes Inserts, insert holders and tool holders are interchangeable and used for machining rotors and drum applications.. Tool Holder, rum, Negative Rake Tool Holder, rum, Positive Rake (Standard with any L500 Series Lathe). Tool Holder, Rotor, LH, Negative Rake Tool Holder, Rotor, LH, Positive Rake, (Standard with any L500 Series Lathe) E. Tool Holder, Rotor, RH, Negative Rake E F G F. Tool Holder, Rotor, RH, Positive Rake (Standard with any L500 Series Lathe) G. Tool Holder, rum, Med. uty Truck Parking rake (For L500 Series Lathes) * Patented 21

22 Inserts & Tool Holders OL400 / OL430M / OL360 & L505 / L501 rake Lathes H. Inserts, Negative Rake (0.030" Radius Tip), 4-Pack Inserts, Positive Rake (0.015" Radius Tip), 4-Pack, Standard (not shown) I. Inserts, Negative Rake (0.030" Radius Tip), 24-Pack H I Inserts, Positive Rake (0.015" Radius Tip), 24-Pack (not shown) J. Inserts, Positive Rake (0.030" Radius Tip) 6-Pack J K K. Micro-Round Insert Kit Includes: Inserts, Micro-Round, 10-pack Insert Tool, Torx #7, Micro-Round Insert Insert Screws, Torx #7, Micro-Round Insert L M N L. Tool Holder, LH Rotor Micro-Round Insert... RP L M. Tool Holder, RH Rotor Micro-Round Insert... RP R N. 3-Sided Insert & Tool Holder Kit Includes: Tool Holder, LH Rotor,.060" radius Tool Holder, RH Rotor,.060" radius Inserts, Positive Rake,.060" radius (6 screws and 6 inserts) 22

23 ust ontainment System L505 / L501 ench Lathes L500 ust ontainment System ( ) esigned to contain brake machining dust and metal particles that can potentially stain wet surfaces in the automotive shop environment The dust cover can be unhinged and quickly removed as needed ccess window allows easy viewing of work piece during machining Models L505- or L505- can be ordered with the ontainment System as a single part number or the ontainment System can be sold as an accessory and added to an existing lathe bench The ust ontainment System requires a conventional shop vacuum with 2.5" inlet hose; NOT supplied with the ontainment System 23

24 For more information on Hunter rake Lathes... For more information on Hunter L500 Series rake Lathes, ask your Hunter sales representative for a copy of Form 3937-T. For information on Hunter On-ar rake Lathes, ask your Hunter sales representative for a copy of Form 5071-T. ecause of continuing technological advancements, specifications, models and options are subject to change without notice. HunterPro is a trademark of Hunter Engineering ompany. 0710LP5M.1.11 opyright 2010 Hunter Engineering ompany Form 3947-T, 07/10 Supersedes 3947-T, 01/10