Brake Lathe Accessories

Transcription

1 rake Lathe ccessories

2 On-car lathe standard accessory package Trolley stand & support structure or utoomp lite lathe Safety glasses Lug nut kit or use when existing lug nuts do not clear universal adaptor attachment bolts. ncludes: Lug nut, 1/2"-20 (4 ea.) Lug nut, 12 x 1.5mm (4 ea.) Lug nut, 9/16"-18 (5 ea.) Lug nut, 14mm x 1.5mm (4 ea.) Lug nut, 12mm x 1.25mm (4 ea.) Lug nut, 7/16"-20 (4 ea.) Lug nut, 14mm x 2.0mm (4 ea.) Lug nut, 12 x 1.75mm (4 ea.) Tool, 22 mm ratchet wrench Micro-round insert kit Tool older, R rotor for micro-round insert Tool older, L rotor for micro-round insert rush, 2" Tool, 6 mm T-wrench J Tool, 8 mm hex key K ook, double-ended L Tool, 8 mm wrench M Stabilizer assembly ncludes: Tube Knob Rod Spacer washers (4 ea.) not pictured utoomp lite with standard trolley J Precision machined spacer washers are placed under flange adaptor when necessary, to clear studs with tall shoulders or hubs with exposed bolts. K L M 2

3 daptor kits & accessories for unter on-car lathes Pro adaptor kit The optional Pro kit enables the servicing of most passenger cars and light trucks up to and including ½-ton ratings. ncludes a complete line of light-duty truck and passenger car adaptors Lug flange adaptor Lug flange adaptor x130 mm, 5x135 mm, 5x150 mm, 5x160 mm x4.50", 3x114.3 mm, 3x115 mm, 6x135 mm x5.50", 5x5.50", 6x5.50" x5.00", 6x5.00" x130 mm, 6x132 mm x105 mm, 6x120mm Passenger adaptor kit onsists of two adaptors with coverage for a wide range of applications fitting most passenger car and some light truck 4x2 rotors Lug flange adaptor Lug flange adaptor xtended twin cutter tool assembly This kit greatly expands the diameter and offset capacity of utoomp lite lathes to service deep-offset rear rotors found on dually trucks. lso allows servicing of rear rotors with integral parking brakes commonly found in late model trucks. Max. diameter: 16.25" % Max. thickness: 3.25" See orm 6133-T for application information. 3

4 daptor kits & accessories for unter on-car lathes Passenger car & light truck adaptors 4-Lug flange adaptor x98 mm, 4x100 mm, 4x4.00", 4x4.25", 4x110 mm, 4x4.50", 4x114.3 mm, 4x120 mm its most 4-lug vehicles. 5-Lug flange adaptor x100 mm, 5x4.25", 5x110 mm, 5x112 mm, 5x4.50", 5x114.3 mm, 5x115 mm, 5x120 mm, 5x4.75" its most 5-lug vehicles x5.50", 5x5.50", 6x5.50" cura, adillac, hevrolet, hrysler, odge, RM, ord, eo, M, onda, yundai, nfiniti, suzu, Jeep, Kia, Lexus, Mazda, Mitsubishi, Nissan, Plymouth, Suzuki, Toyota Recommended for late model 4x4 with non-protruding hubs x5.00", 6x5.00" uick, adillac, hevrolet, hrysler, odge, ord, M, suzu, Jeep, Lincoln, Mercury, Oldsmobile, Pontiac, Saab, Volkswagen Recommended for late model 4x4 with non-protruding hubs x130 mm, 5x135 mm, 5x150 mm, 5x160 mm udi, odge, ord, reightliner, Lexus, Lincoln, Mercedes-enz, Porsche, Toyota, Volkswagen x4.50", 3x114.3 mm, 3x115 mm, 6x135 mm uick, adillac, odge, SRT, ord, Kia, Lincoln, Nissan, Pontiac, Saturn, Suzuki x5.50", 5x5.50", 6x5.50" nfiniti QX80 Recommended for early model 4x4 with protruding hubs x6.50", 7x150 mm, 8x6.50", 8x170 mm ord Lug, L 7-Lug Recommended for late model 4x4 with non-protruding hubs x6.50", 5x155 mm x150 mm, 8x6.50", 8x170 mm x130 mm, 6x132 mm x105 mm, 6x120mm entley, Land Rover, Rolls Royce odge/ram 2500/3500, ord 250/ /350, ummer 1 uick, hevrolet, odge, Ram, reightliner, M, Saturn uick, adillac, hevrolet, M, Saab 4

5 Medium- and heavy-duty adaptors* x225 mm, 10x7.25", 10x225 mm x8.00", 6x8.75" x8.75", 10x8.75" x225 mm, 10x225 mm hevrolet/m x2, ord 450/550 hevrolet, M, suzu ox Trucks x275 mm x285 mm, 10x11.25" x335 mm x200 mm, 10x7.25" x285 mm, 10x11.25" x6.50", 8x170 mm x205 mm x180 mm, 8x210 mm hevrolet, odge, Ram, ord, M, ummer, Jeep, Nissan, Medium uty Trucks odge, Ram, reightliner hevrolet, M Trucks and ualies * May require xtended Twin utter Tool ssembly,

6 ench lathe accessory packages J K L M N O P S T X Q U R V W L500 series standard accessories lamp cup, 5.75" (2 ea.) lamp cup, 4.50" (2 ea.) Silencer, drum band elt, micro-v 26" Tool, 1" and 1-3/8" wrench Tool, 5/16" wrench Safety glasses Silencer, vented rotor, spring-type Silencer, rotor solid J Spacer, 0.50" K Spacer, 1.00" L Spacer, 4.00" M ye shield, lamp-mounted N ual taper adaptor, 1.10" 1.60" O ual taper adaptor, 1.20" 1.70" P ual taper adaptor, 1.60" 2.10" Q ual taper adaptor, 1.90" 2.50" R ual taper adaptor, 2.30" 2.90" S one, 1.44" 2.75" T one, 2.25" 3.25" U one, 3.06" 4.00" V Spring W Silencer, clip-on disc and chip deflector X nserts, positive rake (0.015" radius tip), 4-pack Y rbor nut, 1" (not shown) Standard unterpro package unterpro wrenchless self-aligning nut elt, micro-v 26" ye shield, lamp-mounted Safety glasses Tool, 5/16" wrench Tool, 1" and 1-3/8" wrench nserts, positive rake (0.015" radius tip), 24-pack L505 shown with optional features 6

7 Workbench options L500 dust containment system* esigned to contain brake machining dust and metal particles that can potentially stain wet surfaces in the automotive shop environment an be unhinged and quickly removed as needed ccess window allows easy viewing of work piece during machining Models L505- or L505- can be ordered with the containment system as a single part number or as an accessory and added to an existing lathe bench Requires a conventional shop vacuum with 2.5" inlet hose; NOT supplied. Lathe bench with backboard ncludes chip tray, storage hooks and literature holder (if ordered separately). Optional bench drawer dd additional storage space to your bench with an optional drawer. asily bolts in place. L505- shown with optional storage drawer and dust containment system Lathe silencers for unter bench lathes unter lathe silencers are ideal for damping out resonant vibration that can occur during the machining of drums and rotors Silencer, truck drum Silencer, drum band standard Silencer, vented rotor band Silencer, vented rotor, spring-type (Patented) Silencer, solid rotor, chain-type ncludes: Rotor 7" O-ring Spring, 0.25" x 2.57" Spring, 0.25" x 3.75" Spring, 0.25" x 4.53" Spring, 0.25" x 6.44" Silencer, rotor solid, large Silencer, rotor solid, small Silencer, rotor, anti-chatter kit for solid rotors ncludes: Silencer, rotor 7" O-ring Silencer, rotor 8" O-ring Silencer, rotor 9" O-ring Silencer, rotor, solid, Magnetic bands (set of 3) Silencer, clip-on disc and chip deflector * 1-7/8" arbor kits not compatible with dust containment system 7

8 daptor kits & accessories for unter bench lathes uild a lathe package to match your service needs by selecting a required adaptor kit from the following. daptor kits may also be used to upgrade any existing lathe using a 1" arbor. lite one adaptor kit onsists of hubbed and hubless adaptors covering a wide range of applications for most passenger cars, light-truck and larger light-trucks, including composites unterpro truck kit unterpro automotive kit Spacer, 0.50" Spacer, 1.00" Spacer, 4.00" daptor, drum, deep 1-ton (3.75" friction surface and wider) Silencer, vented rotor, spring-type Silencer, drum band Silencer, solid rotor, chain-type J Silencer, clip-on disc and chip deflector K daptor, rotor, 92 current 3/4- to 1-ton M 4W; 94 current 3/4- to 1-ton odge 2W and 4W (includes [ ] Small one, 1.31" 1.75") L ual taper adaptor, 1.10" 1.60" M ual taper adaptor, 1.20" 1.70" N ual taper adaptor, 1.60" 2.10" O ual taper adaptor, 1.90" 2.50" P ual taper adaptor, 2.30" 2.90" Q ual taper adaptor, 2.70" 3.20" R ual taper adaptor, 3.10" 3.60" S lange, bearing support T Tool holder, drum, medium duty truck parking brk. (not shown) J K L M N O P Q R S unterpro lathe accessories for unter bench lathes PTNT ubless adaptor kits Quick set up and accurate resurface of hubless and composite rotors and drums Superior surface finish from reduced harmonic chatter vailable in automotive, light-truck and larger light-truck sets PTNT Wrenchless self-aligning nut* ombines the functions of a self-aligning arbor spacer and a hand-tightening arbor nut liminates over-torquing the arbor nut on rotors or drums 8 * ncluded standard with L505- and L505- lathe packages.

9 ual Quickhuck adaptor kit onsists of hubbed and hubless adaptors and three-jaw chuck mounting system. overs a wide range of applications for most rotors, drums and flywheels for passenger cars, light trucks and larger light trucks up, extra large, 7.25" up, 5.75" up, 4.50" one, 1.44" 2.75" Spring Plate, dual-sided truck ual Quickhuck kit lange, bearing support Spacer, 0.50" J Spacer, 1.00" K Spacer, 4.00" L daptor, drum, deep 1-ton (3.75" friction surface & wider) M Silencer, clip-on disc N Silencer, drum band O Silencer, solid rotor, chain-type L M N Q R S T U V W P Silencer, vented rotor, spring-type and hip eflector Q ual taper adaptor, 1.10" 1.60" R ual taper adaptor, 1.20" 1.70" S ual taper adaptor, 1.60" 2.10" T ual taper adaptor, 1.90" 2.50" U ual taper adaptor, 2.30" 2.90" V ual taper adaptor, 2.70" 3.20" W ual taper adaptor, 3.10" 3.60" O J P K asic adaptor kit onsists of hubbed and hubless adaptors covering a wide range of applications fitting most passenger car rotors, drums and flywheels, including composites unterpro automotive kit Silencer, drum band Silencer, solid rotor, chain-type Silencer, clip-on disc and chip deflector Silencer, vented rotor, spring-type Spacer, 0.50" Spacer, 1.00" Spacer, 4.00" ual taper adaptor, 1.10" 1.60" J ual taper adaptor, 1.20" 1.70" K ual taper adaptor, 1.60" 2.10" L ual taper adaptor, 1.90" 2.50" M ual taper adaptor, 2.30" 2.90" J K L M 9

10 daptor kits & accessories for unter bench lathes unterpro -150 adaptor ddresses the 2004 and up ord -150 two-wheel-drive 6- and 7-lug front rotors with internal bearings, which are extremely difficult to setup and machine accurately with traditional brake lathe adaptors ord -150 flange plate earing support flange PTNT unterpro rotor adaptor or hubless cast/composite auto and light truck rotors. overs 90% of rotors in service today. esigned as an entry level or second adaptor set used in busy shops. its rotors with hub bore 1.85" ". Provides accurate mounting of cast and composite hubless rotors ast setup ideal for high-volume shops aptured cone and flange spacer lange spacer ual Quickhuck adaptor The dual-sided, three-jaw chuck adaptor for hubless drums and rotors with center holes from 2.13" to 5.75" can obsolete all other adaptors for use with hubless drums. t offers the advantage of unparalleled centering ability combined with speed of setup. Recommended for use with ual-sided Truck Plate [ ]. Side 1 Kit also includes: Jaws set, small size, 2.13" " (shown installed in Three-Jaw huck - Side 1) Jaws set, large size, 3.75" " (shown installed in Three-Jaw huck - Side 2) Side Tool, T-wrench, three-jaw chuck Truck jaw kit Truck jaws for for use in mounting hubless drums and rotors with center holes from 3.63" to 5.75". Only for use with Quickhuck adaptor [ ]. Must be ordered as a numbered set. 10

11 Self-centering spacer ompensates for over-tightening arbor nut and some mounting errors encountered during setups. xtra-small drum adaptor or drums smaller than 7" diameter. ncludes negative rake insert. [ ] eep 1-ton drum adaptor Required when turning drums in which the friction surface is wider than 3.75". ushings reducer kit Required when using 1-7/8" adaptors on 1" arbors. Set of three [ ] adaptors. Taper adaptor Required to mount flywheel kit [ ] and pilotless drum kit [ ]. Order for L500 models only. xtra-small cup up, 3.50" xtra-small cone one, 1.31" to 1.75" lywheel adaptor kit Mounts flywheels with a pilot hole smaller than 1". Requires for L505 or for L500 models only. ncludes: lywheel cone lywheel base 1" arbor x 9.3" or the L505/501 Series Lathes (pictured) or use with L500 model only 11

12 rbor kits & accessories for unter bench lathes 1" arbor kits PTNT unterpro automotive kit The ultimate in setup rigidity, this set covers most automotive rotors and drums in service today including most odd configured rotors. its most hubless cast/composite automotive rotors, drums and flywheels one, automotive centering, 1.84" 2.20" one, automotive centering, 2.12" 2.47" one, automotive centering, 2.37" 2.75" one, automotive centering, 2.65" 3.00" one, automotive centering, 2.92" 3.30" one, reversible centering, 2.00" 3.98" lange plate, 4.80" lange plate, automotive composite, 5.43" lange spring, 1.92" x 1.00" PTNT unterpro truck kit This set covers light trucks up to and including 1-ton and super-duty trucks. its most hubless cast/composite light truck rotors, drums and flywheels lange spring, 1.92" x 1.00" one, lt. truck centering, 3.20" 3.57" one, lt. truck centering, 3.47" 3.85" one, lt. truck centering, 3.75" 4.12" one, lt. truck centering, 4.03" 4.40" one, lt. truck centering, 4.30" 4.67" one, lt. truck centering, 4.57" 4.95" one, lt. truck centering, 4.85" 5.22" one, lt. truck centering, 5.12" 5.50" J one, lt. truck centering, 5.40" 5.75" K lange plate, large lt. truck, 6.50" L Plate, dual-side truck, 7.25" J K L 12

13 xtra-large cup and cone kit or 1" arbors one, 3.88" 4.44" one, 4.13" 4.97" one, 4.83" 5.50" up, extra large, 7.25" up, extra large, 6.25" ubbed 2W/4W rotor adaptor current 3/4- to 1-ton M 4W, 94-current 3/4- to 1-ton odge 2W and 4W; includes Small one, (not shown). 13

14 rbor kits & accessories for unter bench lathes 1-7/8" arbor kits* ubbed heavy-duty truck adaptor set or mounting heavy-duty hubbed rotors and drums with center holes from 2.16" to 6.00". ones can also be used for hubless rotors and drums with clamp cups [ ], [ ] and spring [ ]. [ or ] 1-7/8" rbor Kit required one, 2.16" 3.37" one, 2.25" 3.62" one, 3.60" 4.50" (2 ea.) one, 3.50" 4.87" (2 ea.) one, 4.62" 6.00" (2 ea.) ubless medium-duty truck adaptor set Use for mounting hubless medium-duty items with center holes from 3.83" to 5.00". [ or ] 1-7/8" arbor kit required one, 3.82" 4.42" one, 4.35" 5.00" lamp cup, 6.25" (set of 2) Spring 1-7/8" arbor kit* /8" arbor kit for the L505/ rbor, 1-7/8" x 17" Tool, spanner wrench Nut, 1-7/8" arbor Spacer, 2" Spacer, 3" (2 required) 1-7/8" arbor kit (not shown) Same as , except the arbor [ ] has a smaller taper for the L500 model. 14 * 1-7/8" arbor kits not compatible with dust containment system

15 ubless heavy-duty truck adaptor set or mounting hubless heavy-duty components with center holes from 4.88" to 8.25". [ or ] 1-7/8" arbor kit required one, 4.88" 5.50" one, 5.44" 6.03" one, 5.97" 6.50" one, 6.50" 7.44" one, 7.00" 7.64" one, 7.58" 8.17" lamp cup, 7.25" (2 ea.) lamp cup, 9.25" (2 ea.) Spring 11/16" arbor kits 11/16" arbor kit /16" arbor kit for mounting splined, hubbed rotors without having to remove the sealed bearings (L505) one, 0.70" to 1.70" Spacer,.75" (2 ea.) Spacer, 1.50" Nut, arbor 11/16" rbor, 11/16" 7.13" 11/16" arbor kit (not shown) Same as except the arbor [ ] has a smaller taper for the L500 model. * 1-7/8" arbor kits not compatible with dust containment system 15

16 nserts & tool holders nserts, insert holders and tool holders are interchangeable and used for machining rotors and drum applications Tool holder, drum, negative rake Tool holder, drum, positive rake (Standard with any L500 series lathe) Tool holder, rotor, L, negative rake Tool holder, rotor, L, positive rake (Standard with any L500 series lathe) Tool holder, rotor, R, negative rake Tool holder, rotor, R, positive rake (Standard with any L500 series lathe) Tool holder, drum, medium duty truck parking brake (or L500 series lathes) nserts, negative rake (0.030" radius tip), 4-pack nserts, positive rake (0.015" radius tip), 4-pack, Standard (not shown) nserts, negative rake (0.030" radius tip), 24-pack nserts, positive rake(0.015" radius tip), 24-pack (not shown) J nserts, positive rake (0.030" radius tip) 6-pack K Micro-round insert kit nserts, micro-round, 10-pack nsert tool, torx #7, micro-round insert nsert screws, torx #7, flat head socket cap screw L Tool holder, L rotor micro-round insert M Tool older, R rotor micro-round insert N sided insert & tool holder kit Tool holder, L rotor,.060" radius Tool holder, R rotor,.060" radius nserts, positive rake,.060" radius (6 screws and 6 inserts) J K M N L ecause of continuing technological advancements, specifications, models and options are subject to change without notice. ullsye, ammeread, ataset, Road orce and Road orce Touch are registered trademarks of unter ngineering ompany. 0817X opyright 2017, unter ngineering ompany orm 3947-T, 08/17 Supersedes form 3947-T, 07/15