Vertical Multi-stage Pumps - 60 Hz.

Transcription

1 P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/ PVM/PVMI/PVMX 4 1/ PVM/PVMI/PVMX 8 3/ PVM/PVMI/PVMX PVM escription TL O ONTNTS Page VRTIL MULTI-STG PRORMN PITY - GLLONS PR MINUT PVM(I/X)2 Series 2-8 PVM(I/X)4 Series 9-15 PVM(I/X)2 /PVM(I/X)4 onstruction Materials 16 PVM(I/X)8 Series PVM(I/X)16 Series H T PVM(I/X)8/PVM(I/X)16 onstruction Materials 29 PVM32 Series 3-33 PVM32 onstruction Materials 34 ypass Orifice Sizing 35 PITY - LITRS PR MINUT Warranty 36 June 26

2 P erk.qxd 1/5/6 3:24 PM Page 2 PVM (I/X) 2 SRIS Performance urves PVM (I/X) 2 Series Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: stage, 2 HP Stage, 2 HP Stage, 1-1/2 HP Stage, 1-1/2 HP Head - m 2 Head - ft 16 4 Stage, 1 HP 4 3 Stage, 3/4 HP /2 Stage, 1/2 HP apacity - US gpm apacity - m 3 /h 2

3 P erk.qxd 1/5/6 3:24 PM Page 3 PVM (I/X) 2 SRIS Performance urves PVM (I/X) 2 Series Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: Stage, 5 HP 17 Stage, 5 HP 16 Stage, 5 HP Stage, 5 HP 2 14 Stage, 5 HP Stage, 3 HP 12 Stage, 3 HP Stage, 3 HP 2 1 Stage, 3 HP 4 9 Stage, 3 HP

4 P erk.qxd 1/5/6 3:24 PM Page 4 PVM (I/X) 2 SRIS Single Stage Performance ata PVM (I/X) 2 Series Head - m 8 6 Head - ft fficiency - % Power - kw.2.1 Power - hp NPSHr - m 4 2 NPSHr - ft apacity - US gpm apacity - m 3 /h 4

5 P erk.qxd 1/5/6 3:24 PM Page 5 PVM2 SRIS ast Iron onstruction LNG llow Space to Remove Motor 3/4" NPT Vent Plug 1/4" NPT Gauge Tap NSI 25 lb 1-1/4" lange 1-1/4" NPT THR 1/4" NPT Gauge Tap Technical Information MINIMUM PUMPING RTS: 1.2 GPM LOW RNG: GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page 12. 3" 1-1/4" NSI. 25 lb. 4-olt lange 9-7/8" 1" 3-15/16" 3-15/16" 8-1/4" 7-1/16" 8-1/4" 1/2" ia. 4 Places 3-1/16" 3-7/8" 5-1/2" imensions and Specifications PVM 2 Series 1/2 thru 2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM2-3/ / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM2-3/ / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM / /4 1-1/4 11-3/8 9-7/8 4-7/ / PVM / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM / /4 1-1/ /8 5-1/ /4 7-1/ PVM / /4 1-1/ /4 4-7/ / PVM / /4 1-1/4 12-3/4 11-1/8 5-5/ / PVM / /4 1-1/4 12-3/4 1-1/8 5-3/4 2-1/ / PVM / /4 1-1/4 13-1/2 11-1/8 5-5/ /8 7-1/ PVM / /4 1-1/4 13-1/2 1-1/8 5-3/4 2-1/8 25-3/4 7-1/ PVM /4 1-1/4 14-1/8 12-1/8 5-5/ /4 7-1/ PVM / /4 1-1/4 14-1/8 11-1/8 5-3/4 2-1/8 27-3/8 7-1/ PVM /4 1-1/4 14-7/8 12-1/8 5-5/ / PVM / /4 1-1/4 14-7/8 11-1/8 5-3/4 2-1/8 28-1/8 7-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. Weight may vary from published information. 5

6 P erk.qxd 1/5/6 3:24 PM Page 6 PVM2 SRIS ast Iron onstruction LNG llow Space to Remove Motor 3/4" NPT Vent Plug 1/4" NPT Gauge Tap NSI 25 lb 1-1/4" lange 1-1/4" NPT THR 1/4" NPT Gauge Tap Technical Information MINIMUM PUMPING RTS: 1.2 GPM LOW RNG: GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page 12. 3" 1-1/4" NSI. 25 lb. 4-olt lange 9-7/8" 3-15/16" 1" 3-15/16" 8-1/4" 7-1/16" 8-1/4" 1/2" ia. 4 Places 3-1/16" 3-7/8" 5-1/2" imensions and Specifications PVM 2 Series 3 thru 5 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM / T 1-1/4 1-1/ /8 6 7/8 2-3/4 32-3/8 8-1/ PVM /46 182T 1-1/4 1-1/ /4 6 7/8 2-7/8 31-1/8 8-1/ PVM T 1-1/4 1-1/4 16-5/8 13-5/8 6-7/8 2-3/4 33-1/8 8-1/ PVM /46 182T 1-1/4 1-1/4 16-5/8 12-1/4 6-7/8 2-7/8 31-7/8 8-1/ PVM / T 1-1/4 1-1/4 17-3/8 13 5/8 6 7/8 2-3/4 33-3/4 8-1/ PVM /46 182T 1-1/4 1-1/4 17-3/8 12-1/4 6 7/8 2-7/8 32-1/2 8-1/ PVM T 1-1/4 1-1/4 18-1/8 13-5/8 6-7/8 2-3/4 34-1/2 8-1/ PVM /46 182T 1-1/4 1-1/4 18-1/8 12-1/4 6-7/8 2-7/8 33-1/4 8-1/ PVM / T 1-1/4 1-1/4 18-3/4 13-5/8 6 7/8 2-3/4 35-1/4 8-1/ PVM /46 182T 1-1/4 1-1/4 18-3/4 12-1/4 6 7/8 2-7/ / PVM TZ 1-1/4 1-1/4 19-1/2 15-1/ /8 38-1/8 1-5/ PVM /46 184T 1-1/4 1-1/4 19-1/2 13-5/8 6 7/8 2-7/ / PVM TZ 1-1/4 1-1/4 2-1/4 15-1/ /8 38-7/8 1-5/ PVM /46 184T 1-1/4 1-1/4 2-1/4 13-5/8 6-7/8 2-7/8 36-3/4 8-1/ PVM TZ 1-1/4 1-1/4 2-7/8 15-1/ /8 39-5/8 1-5/ PVM /46 184T 1-1/4 1-1/4 2-7/8 13-5/8 6 7/8 2-7/8 37-1/2 8-1/ PVM TZ 1-1/4 1-1/4 21-5/8 15-1/ /8 4-1/4 1-5/ PVM /46 184T 1-1/4 1-1/4 21-5/8 13-5/8 6 7/8 2-7/8 38-1/8 8-1/ PVM TZ 1-1/4 1-1/4 22-3/8 15-1/ / / PVM /46 184T 1-1/4 1-1/4 22-3/8 13-5/8 6-7/8 2-7/8 38-7/8 8-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. Weight may vary from published information. 6

7 P erk.qxd 1/5/6 3:24 PM Page 7 PVM (I/X) 2 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor Vent Plug behind oupling Guard NSI 25 lb 1-1/4" lange VITULI 1-1/4" Victaulic Technical Information MINIMUM PUMPING RTS: 1.2 GPM LOW RNG: GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page 12. 3" 3-7/8" 9-7/8" 3-15/16" 8-1/4" 3-15/16" 8-3/16" 7-3/32" 8-3/16" 2-1/8" 5-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 2 Series 1/2 thru 2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X)2-3/ / /4 1-1/4 11-3/4 9-1/4 4-7/ PVM(I/X)2-3/ / /4 1-1/4 11-3/4 9-1/4 4-7/ PVM(I/X) / /4 1-1/4 11-3/4 9-7/8 4-7/ / PVM(I/X) / /4 1-1/4 11-3/4 9-7/8 4-7/ / PVM(I/X) / /4 1-1/4 12-3/8 11-1/8 5-1/ /8 7-1/ PVM(I/X) / /4 1-1/4 12-3/8 11-1/8 5-1/ /8 7-1/ PVM(I/X) / /4 1-1/4 13-1/8 11-1/8 5-3/4 2-1/8 26-3/8 7-1/ PVM(I/X) / /4 1-1/4 13-1/8 11-1/8 5-3/4 2-1/8 26-3/8 7-1/ PVM(I/X) / /4 1-1/4 13-7/8 11-1/8 5-3/4 2-1/ / PVM(I/X) / /4 1-1/4 13-7/8 11-1/8 5-3/4 2-1/ / PVM(I/X) /4 1-1/4 14-1/2 12-1/8 5-3/4 2-1/8 28-5/8 7-1/ PVM(I/X) / /4 1-1/4 14-1/2 12-1/8 5-3/4 2-1/8 28-5/8 7-1/ PVM(I/X) /4 1-1/4 15-1/4 12-1/8 5-3/4 2-1/8 29-3/8 7-1/ PVM(I/X) / /4 1-1/4 15-1/4 12-1/8 5-3/4 2-1/8 29-3/8 7-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 7

8 P erk.qxd 1/5/6 3:24 PM Page 8 PVM (I/X) 2 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor Vent Plug behind oupling Guard NSI 25 lb 1-1/4" lange VITULI 1-1/4" Victaulic Technical Information MINIMUM PUMPING RTS: 1.2 GPM LOW RNG: GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page 12. 3" 3-7/8" 9-7/8" 3-15/16" 8-1/4" 3-15/16" 8-3/16" 7-3/32" 8-3/16" 2-1/8" 5-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 2 Series 3 thru 5 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X) / T 1-1/4 1-1/4 16-3/8 12-1/4 6-7/8 2-7/8 31-1/2 8-1/ PVM(I/X) /46 182T 1-1/4 1-1/4 16-3/8 1-1/4 6-7/8 2-7/8 29-1/2 8-1/ PVM(I/X) T 1-1/4 1-1/ /8 2-5/8 2-7/8 33-5/8 8-1/ PVM(I/X) /46 182T 1-1/4 1-1/ /8 2-5/8 2-7/8 33-5/8 8-1/ PVM(I/X) / T 1-1/4 1-1/4 17-3/4 12-1/4 6-7/8 2-3/4 32-7/8 8-1/ PVM(I/X) /46 182T 1-1/4 1-1/4 17-3/4 1-1/4 6-7/8 2-7/8 3-7/8 8-1/ PVM(I/X) T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM(I/X) /46 182T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM(I/X) / T 1-1/4 1-1/4 19-1/8 12-1/4 6-7/8 2-3/4 34-1/4 8-1/ PVM(I/X) /46 182T 1-1/4 1-1/4 19-1/8 1-1/4 6-7/8 2-7/8 32-1/4 8-1/ PVM(I/X) TZ 1-1/4 1-1/4 19-7/8 15-1/ /8 38-1/2 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 19-7/8 13-5/8 6-7/8 2-7/8 36-3/8 8-1/ PVM(I/X) TZ 1-1/4 1-1/4 2-5/8 15-1/ /8 39-1/4 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 2-5/8 15-1/ /8 39-1/4 1-5/ PVM(I/X) TZ 1-1/4 1-1/4 21-1/4 15-1/ / / PVM(I/X) /46 184T 1-1/4 1-1/4 21-1/4 13-5/8 6-7/8 2-7/8 37-7/8 8-1/ PVM(I/X) TZ 1-1/4 1-1/ / /8 4-5/8 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/ /8 6-7/8 2-7/8 38-5/8 8-1/ PVM(I/X) TZ 1-1/4 1-1/4 22-3/4 15-1/ /8 41-3/8 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 22-3/4 15-1/ /8 41-3/8 1-5/ * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 8

9 P erk.qxd 1/5/6 3:24 PM Page 9 PVM (I/X) 4 SRIS Performance urves PVM (I/X) 4 Series Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: 36 8 Stage, 3 HP /7 Stage, 3 HP Stage, 3 HP Stage, 2 HP Head - m 2 Head - ft 16 4 Stage, 1-1/2 HP 3 Stage, 1-1/2 HP Stage, 3/4 HP /1 Stage, 1/2 HP apacity - US gpm apacity - m 3 /h 9

10 P erk.qxd 1/5/6 3:24 PM Page 1 PVM (I/X) 4 SRIS Performance urves PVM (I/X) 4 Series 35 8 Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: Stage, 7 1/2 HP 15 Stage 7 1/2 HP Stage, 5 HP 13 Stage, 5 HP Stage 5 HP 11 Stage, 5 HP Stage, 5 HP 9 Stage, 5 HP

11 P erk.qxd 1/5/6 3:24 PM Page 11 PVM (I/X) 4 SRIS Single Stage Performance ata PVM (I/X) 4 Series Head - m 8 6 Head - ft fficiency - % Power - kw.4.2 Power - hp NPSHr - m NPSHr - ft apacity - USgpm apacity - m 3 /h 11

12 P erk.qxd 1/5/6 3:24 PM Page 12 PVM4 SRIS ast Iron onstruction LNG llow Space to Remove Motor 3/4" NPT Vent Plug 1/4" NPT Gauge Tap NSI 25 lb 1-1/4" lange 1-1/4" NPT 3" THR 1/4" NPT Gauge Tap Technical Information MINIMUM PUMPING RTS: 3 GPM LOW RNG: 3 4 GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ / MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /4" NSI. 25 lb. 4-olt lange 9-7/8" 1" 3-15/16" 3-15/16" 8-1/4" 7-1/16" 8-1/4" 1/2" ia. 4 Places 3-1/16" 3-7/8" 5-1/2" imensions and Specifications PVM 4 Series 1/2 thru 2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM4-2/ / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM4-2/ / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM / /4 1-1/4 11-3/8 9-7/8 4-7/ / PVM / /4 1-1/4 11-3/8 9-1/4 4-7/ / PVM / /4 1-1/4 12-3/8 11-1/8 5-1/ /8 7-1/ PVM / /4 1-1/4 12-3/8 9-1/4 4-7/ / PVM / /4 1-1/4 13-1/2 11-1/8 5-5/ /8 7-1/ PVM / /4 1-1/4 13-1/2 1-1/8 5-3/4 2-1/8 25-3/4 7-1/ PVM /4 1-1/4 14-1/ / /8 7-1/ PVM / /4 1-1/4 14-1/2 11-1/8 5-3/4 2-1/8 27-3/4 7-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. 12

13 P erk.qxd 1/5/6 3:24 PM Page 13 PVM4 SRIS ast Iron onstruction LNG llow Space to Remove Motor 3/4" NPT Vent Plug 1/4" NPT Gauge Tap NSI 25 lb 1-1/4" lange 1-1/4" NPT 3" THR 1/4" NPT Gauge Tap Technical Information MINIMUM PUMPING RTS: 3 GPM LOW RNG: 3 4 GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ / MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /4" NSI. 25 lb. 4-olt lange 9-7/8" 3-15/16" 1" 3-15/16" 8-1/4" 7-1/16" 8-1/4" 1/2" ia. 4 Places 3-1/16" 3-7/8" 5-1/2" imensions and Specifications PVM 4 Series 3 thru 7-1/2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM T 1-1/4 1-1/ /8 6-7/8 2-3/4 32-3/8 8-1/ PVM /46 182T 1-1/4 1-1/ /4 6-7/8 2-7/8 31-1/8 8-1/ PVM4-8/ T 1-1/4 1-1/4 18-1/8 13-5/8 6-7/8 2-3/4 34-1/2 8-1/ PVM4-8/ /46 182T 1-1/4 1-1/4 18-1/8 12-1/4 6-7/8 2-7/8 33-2/8 8-1/ PVM T 1-1/4 1-1/4 18-1/8 13-5/8 6-7/8 2-3/4 34-1/2 8-1/ PVM /46 182T 1-1/4 1-1/4 18-1/8 12-1/4 6-7/8 2-7/8 33-1/4 8-1/ PVM TZ 1-1/4 1-1/4 19-1/8 15-1/ /8 37-3/4 1-5/ PVM /46 184T 1-1/4 1-1/4 19-1/8 13-5/8 6-7/8 2-7/8 35-3/4 1-5/ PVM TZ 1-1/4 1-1/4 2-1/4 15-1/ /8 38-7/8 1-5/ PVM /46 184T 1-1/4 1-1/4 2-1/4 13-5/8 6-7/8 2-7/8 36-3/4 8-1/ PVM TZ 1-1/4 1-1/4 21-1/4 15-1/ /8 39-7/8 1-5/ PVM /46 184T 1-1/4 1-1/4 21-1/4 13-5/8 6-7/8 2-7/8 37-7/8 1-5/ PVM TZ 1-1/4 1-1/4 22-3/8 15-1/ / / PVM /46 184T 1-1/4 1-1/4 22-3/8 13-5/8 6-7/8 2-7/8 38-7/8 8-1/ PVM TZ 1-1/4 1-1/4 23-3/8 15-1/ / / PVM /46 184T 1-1/4 1-1/4 23-3/8 13-5/8 6-7/8 2-7/ / PVM TZ 1-1/4 1-1/4 24-1/2 15-1/ /8 43-1/8 1-5/ PVM /46 184T 1-1/4 1-1/4 24-1/2 13-5/8 6-7/8 2-7/ / PVM TZ 1-1/4 1-1/4 25-1/2 15-1/ /8 44-1/8 1-5/ PVM /46 213TZ 1-1/4 1-1/4 25-1/ /8 3-3/ / PVM TZ 1-1/4 1-1/4 26-5/8 15-1/ /8 45-1/4 1-5/ PVM /46 213TZ 1-1/4 1-1/4 26-5/8 15-1/4 7-7/8 3-3/8 45-1/4 1-3/ * Measurements represent the largest number possible for each model using standard efficiency motors. 13

14 P erk.qxd 1/5/6 3:24 PM Page 14 PVM (I/X) 4 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor Vent Plug behind oupling Guard NSI 25 lb 1-1/4" lange 3" VITULI 1-1/4" Victaulic Technical Information MINIMUM PUMPING RTS: 3 GPM LOW RNG: 3 4 GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ / MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /8" 9-7/8" 3-15/16" 8-1/4" 3-15/16" 8-3/16" 7-3/32" 8-3/16" 2-1/8" 5-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 4 Series 1/2 thru 2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X)4-2/ / /4 1-1/4 11-3/4 9-1/4 4-7/ PVM(I/X)4-2/ / /4 1-1/4 11-3/4 9-1/4 4-7/ PVM(I/X) / /4 1-1/4 11-3/4 9-7/8 4-7/ / PVM(I/X) / /4 1-1/4 11-3/4 9-7/8 4-7/ / PVM(I/X) / /4 1-1/4 12-3/4 11-1/8 5-1/ / PVM(I/X) / /4 1-1/4 12-3/4 11-1/8 5-1/ / PVM(I/X) / /4 1-1/4 13-7/8 11-1/8 5-3/4 2-1/ / PVM(I/X) / /4 1-1/4 13-7/8 11-1/8 5-3/4 2-1/ / PVM(I/X) /4 1-1/4 14-7/ /4 2-1/ / PVM(I/X) / /4 1-1/4 14-7/ /4 2-1/ / * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 14

15 P erk.qxd 1/5/6 3:24 PM Page 15 PVM (I/X) 4 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor Vent Plug behind oupling Guard NSI 25 lb 1-1/4" lange 3" VITULI 1-1/4" Victaulic Technical Information MINIMUM PUMPING RTS: 3 GPM LOW RNG: 3 4 GPM MINIMUM SUTION PIP SIZS: 1-1/4 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ / MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /8" 9-7/8" 3-15/16" 8-1/4" 3-15/16" 8-3/16" 7-3/32" 8-3/16" 2-1/8" 5-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 4 Series 3 thru 7-1/2 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X) T 1-1/4 1-1/4 16-3/8 13-5/8 6-7/8 2-7/8 32-7/8 8-1/ PVM(I/X) /46 182T 1-1/4 1-1/4 16-3/8 13-5/8 6-7/8 2-7/8 32-7/8 8-1/ PVM(I/X)4-8/ T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM(I/X)4-8/ /46 182T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM(I/X) T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM(I/X) /46 182T 1-1/4 1-1/4 18-1/2 13-5/8 6-7/8 2-7/ / PVM4(I/X) TZ 1-1/4 1-1/4 19-1/2 15-1/ /8 38-1/8 1-5/ PVM4(I/X) /46 184T 1-1/4 1-1/4 19-1/2 13-5/8 6-7/8 2-7/8 36-1/8 1-5/ PVM(I/X) TZ 1-1/4 1-1/4 2-5/8 15-1/ /8 39-1/4 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 2-5/8 15-1/ /8 39-1/4 1-5/ PVM4(I/X) TZ 1-1/4 1-1/4 21-5/8 15-1/ /8 4-1/4 1-5/ PVM4(I/X) /46 184T 1-1/4 1-1/4 21-5/8 13-5/8 6-7/8 2-7/8 38-1/4 1-5/ PVM(I/X) TZ 1-1/4 1-1/4 22-3/4 15-1/ /8 41-3/8 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 22-3/4 15-1/ /8 41-3/8 1-5/ PVM4(I/X) TZ 1-1/4 1-1/4 23-3/4 15-1/ /8 42-3/8 1-5/ PVM4(I/X) /46 184T 1-1/4 1-1/4 23-3/4 13-5/8 6-7/8 2-7/8 4-3/8 1-5/ PVM(I/X) TZ 1-1/4 1-1/4 24-7/8 15-1/ /8 43-1/2 1-5/ PVM(I/X) /46 184T 1-1/4 1-1/4 24-7/8 15-1/ /8 43-1/2 1-5/ PVM4(I/X) TZ 1-1/4 1-1/4 25-7/8 15-1/ /8 44-1/2 1-5/ PVM4(I/X) /46 213TZ 1-1/4 1-1/4 25-7/ /8 3-3/8 41-3/8 1-5/ PVM(I/X) TZ 1-1/4 1-1/ / /8 45-3/8 1-5/ PVM(I/X) /46 213TZ 1-1/4 1-1/ / /8 45-3/8 1-5/ * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 15

16 P erk.qxd 1/5/6 3:24 PM Page 16 PVM (I/X) 2 & 4 SRIS onstruction Materials escription ast Iron 34 Stainless Steel 316 Stainless Steel Optional ccessories Shaft ISI 316 SS ISI 316 SS ISI 316 SS Impellers, iffuser hambers, Pump Sleeve, Suction Interconnector, and Shaft Seal Parts ISI 34 SS ISI 34 SS ISI 316 SS Suction/discharge lass 3 ast Iron 34 SS 316 SS Motor bracket lass 3 ast Iron lass 3 I or 316 SS lass 3 I or 316 SS Motor ouplings lass 3 ast Iron lass 3 ast Iron lass 3 ast Iron Intermediate hamber luminum Oxide luminum Oxide luminum Oxide earings eramic eramic eramic earing Ring Tungsten arbide Tungsten arbide Tungsten arbide O-Rings PM PM PM Viton or una Wear Rings Teflon Teflon Teflon Sleeve O-Rings PM PM PM Viton or una Shaft Spacers ISI 316 SS ISI 316 SS ISI 316 SS Top Spring ISI 316 SS ISI 316 SS ISI 316 SS oupling Guard ISI 32 SS ISI 32 SS ISI 32 SS Staybolts, Nuts & Washers Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Mechanical Seal (High Pressure) Stationary ace Tungsten arbide Tungsten arbide Tungsten arbide Rotating ace Tungsten arbide Tungsten arbide Tungsten arbide O-Rings PM PM PM Viton or una Upper and Lower rivers ISI 316 SS ISI 316 SS ISI 316 SS Spring ISI 316 SS ISI 316 SS ISI 316 SS 16

17 P erk.qxd 1/5/6 3:24 PM Page 17 PVM (I/X) 8 SRIS Performance urves PVM (IX) 8 Series Nominal RPM: 345 ased on resh 68 Maximum Working Pressure: Stage, 5 HP Stage, 5 HP Stage, 3 HP Head - m 2 Head - ft 16 3 Stage, 3 HP Stage, 1-1/2 HP /1 Stage, 3/4 HP apacity - US gpm apacity - m 3 /h 17

18 P erk.qxd 1/5/6 3:24 PM Page 18 PVM (I/X) 8 SRIS Performance urves PVM (I/X) 8 Series 3 1, Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: Stage, 15 HP Stage, 15 HP 14 Stage, 1 HP Stage, 1 HP 2 12 Stage, 1 HP Stage, 1 HP 1 Stage, 7.5 HP Stage, 7.5 HP 4 8 Stage, 7.5 HP 7 Stage, 5 HP

19 P erk.qxd 1/5/6 3:24 PM Page 19 PVM (I/X) 8 SRIS Single Stage Performance ata PVM (I/X) 8 Series Head - m 1 Head - ft fficiency - % Power - kw Power - hp NPSHr - m NPSHr - ft apacity - US gpm apacity - m 3 /h 19

20 P erk.qxd 1/5/6 3:24 PM Page 2 PVM8 SRIS ast Iron onstruction LNG llow Space to Remove Motor THR Technical Information MINIMUM PUMPING RTS: 5.3 GPM LOW RNG: GPM 1/4" NPT Gauge Tap 3/4" NPT Vent Plug 1/4" NPT Gauge Tap MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ MXIMUM MINT TMPRTUR: 14 NSI 25 lb 2" lange 2" NPT LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 2" NSI. 25 lb. 8-olt lange 11-13/16" 12-5/64" 5-1/8" 5-1/8" 9-3/4" 8-1/2" 9-3/4" 17/32" ia. 4 Places 4-1/16" 5" 6-1/2" imensions and Specifications PVM 8 Series 3/4 thru 5 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM8-2/ / /8 4-7/ PVM8-2/ / /4 4-7/ / PVM / /8 5-5/ /4 7-1/ PVM / /8 5-3/4 2-1/8 27-1/4 7-1/ PVM T /4 13-5/8 6-7/8 2-3/4 34-1/8 8-1/ PVM /46 182T /4 12-1/4 6-7/8 2-7/8 32-7/8 8-1/ PVM T /8 13-5/8 6-7/8 2-3/4 35-3/8 8-1/ PVM /46 182T /8 12-1/4 6-7/8 2-7/8 34-1/8 8-1/ PVM TZ /8 15-1/ /8 38-3/4 1-5/ PVM /46 184T /8 13-5/8 6-7/8 2-7/8 36-5/8 8-1/ PVM TZ /4 15-1/ / / PVM /46 184T /4 13-5/8 6-7/8 2-7/8 37-7/8 8-1/ PVM TZ /4 15-1/ / / PVM /46 184T /4 15-1/4 7-7/8 3-3/ / * Measurements represent the largest number possible for each model using standard efficiency motors. 2

21 P erk.qxd 1/5/6 3:24 PM Page 21 PVM8 SRIS ast Iron onstruction LNG llow Space to Remove Motor THR Technical Information MINIMUM PUMPING RTS: 5.3 GPM LOW RNG: GPM 1/4" NPT Gauge Tap 3/4" NPT Vent Plug 1/4" NPT Gauge Tap MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ MXIMUM MINT TMPRTUR: 14 NSI 25 lb 2" lange 2" NPT LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 2" NSI. 25 lb. 8-olt lange 11-13/16" 12-5/64" 5-1/8" 5-1/8" 9-3/4" 8-1/2" 9-3/4" 17/32" ia. 4 Places 4-1/16" 5" 6-1/2" imensions and Specifications PVM 8 Series 7-1/2 thru 15 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM T /8 15-1/ /8 42-1/4 1-5/ PVM /46 213T /8 15-1/4 7-7/8 3-3/8 42-1/4 1-3/ PVM T / /8 44-5/8 1-5/ PVM /46 213T /4 7 7/8 3-3/8 44-5/8 1-5/ PVM T / /8 44-5/8 1-5/ PVM /46 213T /4 7-7/8 3-3/8 44-5/8 1-3/ PVM T /8 16-3/8 8-3/4 3-3/8 48-1/8 1-5/ PVM /46 215T /8 16-3/ /8 48-1/8 1-5/ PVM T /8 16-3/8 8-3/4 3-3/8 48-1/8 1-5/ PVM /46 215T /8 15-1/ / / PVM T /8 16-3/8 8-3/4 3-3/8 48-1/8 1-5/ PVM /46 215T /8 16-3/ /8 48-1/8 1-5/ PVM T /4 16-3/8 8-3/4 3-3/8 5-1/2 1-5/ PVM /46 215T /4 15-1/ /8 49-3/8 1-3/ PVM /46 254T /8 19-5/8 9-1/2 4-1/4 57-1/ PVM /46 254T /8 19-5/8 9-1/2 4-1/4 57-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. 21

22 P erk.qxd 1/5/6 3:24 PM Page 22 PVM (I/X) 8 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor VITULI Technical Information MINIMUM PUMPING RTS: 5.3 GPM LOW RNG: GPM 3/4" NPT Vent Plug MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ NSI 25 lb 2" lange 2" Victaulic MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 5" 11-13/16" 5-1/8" 1-1/4" 5-1/8" 4-13/32" 9-5/8" 8-1/2" 9-5/8" 6-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 8 Series 3/4 thru 5 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X)8-2/ / /8 4-7/ PVM(I/X)8-2/ / /8 4-7/ PVM(I/X) / /8 5-3/4 2-1/8 28-1/4 7-1/ PVM(I/X) / /8 5-3/4 2-1/8 28-1/4 7-1/ PVM(I/X) T /4 13-5/8 6-7/8 2-7/8 34-1/4 8-1/ PVM(I/X) /46 182T /4 13-5/8 6-7/8 2-7/8 34-1/4 8-1/ PVM(I/X) T /8 13-5/8 6-7/8 2-7/8 35-1/2 8-1/ PVM(I/X) /46 182T /8 13-5/8 6-7/8 2-7/8 35-1/2 8-1/ PVM(I/X) TZ /8 15-1/ /8 38-3/4 1-5/ PVM(I/X) /46 184T /8 15-1/ /8 38-3/4 1-5/ PVM(I/X) TZ /4 15-1/ / / PVM(I/X) /46 184T /4 15-1/ / / PVM(I/X) TZ /8 15-1/ / / PVM(I/X) /46 184T /8 15-1/4 7-7/8 3-3/ / * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 22

23 P erk.qxd 1/5/6 3:24 PM Page 23 PVM (I/X) 8 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor VITULI Technical Information MINIMUM PUMPING RTS: 5.3 GPM LOW RNG: GPM 3/4" NPT Vent Plug MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 2/ NSI 25 lb 2" lange 2" Victaulic MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 5" 11-13/16" 5-1/8" 1-1/4" 5-1/8" 4-13/32" 9-5/8" 8-1/2" 9-5/8" 6-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 8 Series 7-1/2 thru 15 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X) T /8 15-1/ /8 42-1/4 1-5/ PVM(I/X) /46 213T /8 15-1/ /8 42-1/4 1-5/ PVM(I/X) T /8 15 1/ /8 44-3/4 1-5/ PVM(I/X) /46 213T /8 151/4 7-7/8 3-3/8 44-3/4 1-5/ PVM(I/X) T / /8 44-5/8 1-5/ PVM(I/X) /46 213T / /8 44-5/8 1-5/ PVM(I/X) T /2 16-3/8 8-3/4 3-3/8 48-1/4 1-5/ PVM(I/X) /46 215T /2 16-3/ /8 48-1/4 1-5/ PVM(I/X) T /8 16-1/2 8-3/4 3-3/8 48-1/4 1-5/ PVM(I/X) /46 215T /8 16-1/2 8-3/4 3-3/8 48-1/4 1-5/ PVM(I/X) T /2 16-3/8 8-3/4 3-3/8 48-1/4 1-5/ PVM(I/X) /46 215T /2 16-3/ /8 48-1/4 1-5/ PVM(I/X) T /4 16-3/8 8-3/4 3-3/8 5-1/2 1-5/ PVM(I/X) /46 215T /4 16-3/8 8-3/4 3-3/8 5-1/2 1-5/ PVM(I/X) /46 254T /4 19-5/8 9-1/2 4-1/4 57-5/ PVM(I/X) /46 254T /8 19-5/8 9-1/2 4-1/4 57-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 23

24 P erk.qxd 1/5/6 3:24 PM Page 24 PVM (I/X) 16 SRIS Performance urves PVM (I/X) 16 Series Nominal RPM: 345 ased on resh 68 Maximum Working Pressure: Stage, 1 HP Stage, 7.5 HP Head - m 4 2 Head - ft Stage, 7.5 HP 3/2 Stage, 5 HP apacity - US gpm apacity - m 3 /h 24

25 P erk.qxd 1/5/6 3:24 PM Page 25 PVM (I/X) 16 SRIS Performance urves PVM (I/X) 16 Series 3 1, Nominal RPM: 345 ased on resh 68. Maximum Working Pressure: Stage, 25 HP 11 Stage, 25 HP Stage, 2 HP 9 Stage, 2 HP stage, 15 HP Stage, 15 HP Stage, 15 HP

26 P erk.qxd 1/5/6 3:24 PM Page 26 PVM (I/X) 16 SRIS Single Stage Performance ata PVM (I/X) 16 Series Head - m 1 Head - ft fficiency - % Power - kw Power - hp NPSHr - m 8 4 NPSHr - ft apacity - US gpm apacity - m 3 /h 26

27 P erk.qxd 1/5/6 3:24 PM Page 27 PVM16 SRIS ast Iron onstruction LNG llow Space to Remove Motor THR Technical Information MINIMUM PUMPING RTS: 8.5 GPM LOW RNG: GPM 1/4" NPT Gauge Tap 3/4" NPT Vent Plug 1/4" NPT Gauge Tap MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ MXIMUM MINT TMPRTUR: 14 NSI 25 lb 2" lange 2" NPT LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 2" NSI. 25 lb. 8-olt lange 11-13/16" 12-5/64" 5-1/8" 5-1/8" 9-3/4" 8-1/2" 9-3/4" 17/32" ia. 4 Places 4-1/16" 5" 6-1/2" imensions and Specifications PVM 16 Series 5 thru 25 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM16-3/ TZ /8 15-1/ /8 38-1/4 1-5/ PVM16-3/ /46 184T /8 13-5/8 6-7/8 2-7/8 36-1/8 8-1/ PVM T /8 15-1/ /8 38-1/4 1-5/ PVM /46 213T /8 15-1/4 7-1/2 3-3/8 38-1/4 1-3/ PVM T /8 15-1/ / / PVM /46 213T /8 15-1/4 7-7/8 3-3/ / PVM T /8 16-3/8 8-3/4 3-3/8 42-7/8 1-5/ PVM /46 215T /8 15-1/ /8 41-3/4 1-3/ PVM /46 254T /8 19-5/8 9-1/2 4-1/4 49-1/ PVM /46 254T /8 19-5/8 9-1/2 4-1/ PVM /46 254T /8 19-5/8 9-1/2 4-1/4 52-7/ PVM /46 254T /4 21-3/4 9-1/ / PVM /46 254T /4 9-1/ /4 11-1/ PVM /46 284TS /8 21-3/4 9-1/2 3-1/4 58-5/ PVM /46 284TS /8 21-3/4 9-1/2 3-1/4 6-3/ * Measurements represent the largest number possible for each model using standard efficiency motors. 27

28 P erk.qxd 1/5/6 3:24 PM Page 28 PVM (I/X) 16 SRIS 34 SS and 316 SS onstruction LNG llow Space to Remove Motor VITULI Technical Information MINIMUM PUMPING RTS: 8.5 GPM LOW RNG: GPM 3/4" NPT Vent Plug MINIMUM SUTION PIP SIZS: 2 Nominal iameter, Schedule 4 Pipe MXIMUM INLT PRSSUR: 3/ NSI 25 lb 2" lange 2" Victaulic MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP ONSTRUTION MTRILS: See Page /2" 5" 11-13/16" 1-1/4" 5-1/8" 5-1/8" 4-13/32" 9-5/8" 8-1/2" 9-5/8" 6-1/2" 17/32" ia. 4 Places imensions and Specifications PVM (I/X) 16 Series 5 thru 25 HP Model Motor rame isc. Suc. imension in Inches* T OP Number HP S.. Ph Volts Size Size Size Wt. Wt. PVM(I/X)16-3/ TZ /2 15-1/ /8 38-1/4 1-5/ PVM(I/X)16-3/ /46 184T /2 15-1/ /8 38-1/4 1-5/ PVM(I/X) T /2 15-1/ /8 38-1/4 1-5/ PVM(I/X) /46 213T /2 15-1/ /8 38-1/4 1-5/ PVM(I/X) T /8 15-1/ / / PVM(I/X) /46 213T /8 15-1/ / / PVM(I/X) T /8 16-3/8 8-3/4 3-3/8 42-7/8 1-5/ PVM(I/X) /46 215T /8 16-3/8 8-3/4 3-3/8 42-7/8 1-5/ PVM(I/X) /46 254T /8 19-5/8 9-1/2 4-1/4 49-1/ PVM(I/X) /46 254T /8 19-5/8 9-1/2 4-1/ PVM(I/X) /46 254T /8 19-5/8 9-1/2 4-1/4 52-7/ PVM(I/X) /46 254T /4 21-3/4 9 1/ / PVM(I/X) /46 254T /4 9-1/ /4 11-1/ PVM(I/X) /46 284TS /4 21-3/4 9-1/2 3-1/4 58-3/ PVM(I/X) /46 284TS /8 21-3/4 9-1/2 3-1/4 6-3/ * Measurements represent the largest number possible for each model using standard efficiency motors. Includes PMVI models constructed of 34 Stainless Steel and PVMX models constructed of 316 Stainless Steel. 28

29 P erk.qxd 1/5/6 3:24 PM Page 29 PVM (I/X) 8 & 16 SRIS onstruction Materials escription ast Iron 34 Stainless Steel 316 Stainless Steel Optional ccessories Shaft ISI 431 SS ISI 431 SS ISI 316 SS Impellers, iffuser hambers, Pump Sleeve, Suction Interconnector, and Shaft Seal Parts ISI 34 SS ISI 34 SS ISI 316 SS Suction/discharge lass 3 ast Iron 34 SS 316 SS Motor bracket lass 3 ast Iron lass 3 I or 316 SS lass 3 I or 316 SS Motor ouplings lass 3 ast Iron lass 3 ast Iron lass 3 ast Iron Intermediate hamber luminum Oxide luminum Oxide luminum Oxide earings eramic eramic eramic earing Ring Tungsten arbide Tungsten arbide Tungsten arbide O-Rings PM PM PM Viton or una-n Wear Rings Teflon Teflon Teflon Sleeve O-Rings PM PM PM Viton or una-n Shaft Spacers ISI 316 SS ISI 316 SS ISI 316 SS Top Spring ISI 316 SS ISI 316 SS ISI 316 SS oupling Guard ISI 32 SS ISI 32 SS ISI 32 SS Staybolts, Nuts & Washers Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Mechanical Seal (High Pressure) Stationary ace Tungsten arbide Tungsten arbide Tungsten arbide Rotating ace Tungsten arbide Tungsten arbide Tungsten arbide O-Rings PM PM PM Viton or una-n Upper and Lower rivers ISI 316 SS ISI 316 SS ISI 316 SS Spring ISI 316 SS ISI 316 SS ISI 316 SS 29

30 P erk.qxd 1/5/6 3:24 PM Page 3 PVM32 SRIS Performance urves PVM32 Series RPM* 345 RPM ased on resh 68. Maximum Working Pressure: 23 PVM32-5 2HP* 12 PVM HP* PVM HP* 1 PVM HP* PVM HP* Head - m Head - ft PVM HP PVM HP PVM HP 4 PVM HP 39 9 PVM32-1 5HP 2 PVM HP apacity - US gpm apacity - m 3 /h 3

31 P erk.qxd 1/5/6 3:24 PM Page 31 PVM32 SRIS Performance urves PVM32 Series 434 1, 352 RPM* 345 RPM ased on resh 68. Maximum Working Pressure: PVM HP* 261 PVM32-1 4HP* PVM HP* PVM32-9 4HP* PVM HP* PVM32-8 3HP* PVM HP* 259 Head - m Head - ft 6 PVM32-7 3HP* PVM HP* PVM HP* PVM HP* apacity - US gpm apacity - m 3 /h 31

32 P erk.qxd 1/5/6 3:24 PM Page 32 PVM32 SRIS Single Stage Performance ata PVM32 Series in Head - m 15 Head - ft in Power - kw Power - hp in in 17 9 NPSHr - m NPSHr - ft apacity - US gpm apacity - m 3 /h 32

33 P erk.qxd 1/5/6 3:24 PM Page 33 PVM32 SRIS ast Iron onstruction Vent Plug Priming, rain and Vent Plugs Threaded ISO 228-G 1/2 Priming Port (2)rain Plugs Rear (2)rain Plugs ront ront Plugs Tapped 1/4" NPT for Gauges 6-11/16" 9-7/16" 11-1/16" NSI 3# 2-1/2" 8-olt lange (6-11 Stage Pumps) 7/8" 5-7/8" 7-1/2" NSI 15# 2-1/2" 4-olt lange (1-5 Stage Pumps) 3/4" Technical Information MINIMUM PUMPING RTS: Up to GPM 175 to GPM LOW RNG: GPM MINIMUM SUTION PIP SIZS: 2-1/2" Nominal iameter, Schedule 4 Pipe MXIMUM MINT TMPRTUR: 14 LIQUI TMPRTUR RNG: +5 to +25 MOTOR OPTIONS: T or OP Single or Three Phase or other options, consult factory. ONSTRUTION MTRILS: See Page /8 4-1/8 5.5" 7." imensions and Specifications PVM32 Series Model Motor rame isc. Suc. imension in Inches* Number HP S.. Ph Volts Size Size Size PVM T 2-1/2 2-1/ PVM /46 182T 2-1/2 2-1/ PVM TZ 2-1/2 2-1/ PVM /46 213T 2-1/2 2-1/ PVM T 2-1/2 2-1/ PVM /46 213T 2-1/2 2-1/ PVM T 2-1/2 2-1/ PVM /46 213T 2-1/2 2-1/ PVM T 2-1/2 2-1/ PVM /46 213T 2-1/2 2-1/ PVM T 2-1/2 2-1/ PVM /46 215T 2-1/2 2-1/ PVM /46 254T 2-1/2 2-1/ PVM /46 254T 2-1/2 2-1/ PVM /46 254T 2-1/2 2-1/ PVM /46 254T 2-1/2 2-1/ PVM /46 254T 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 284TS 2-1/2 2-1/ PVM /46 286TS 2-1/2 2-1/ PVM /46 286TS 2-1/2 2-1/ PVM /46 286TS 2-1/2 2-1/ PVM /46 286TS 2-1/2 2-1/ PVM /46 286TS 2-1/2 2-1/ * Measurements represent the largest number possible for each model using standard efficiency motors. 33

34 P erk.qxd 1/5/6 3:24 PM Page 34 PVM32 SRIS Materials of onstruction Shaft escription Impellers iffuser hambers, Pump Sleeve Split ones and Split one Nuts, and Suction Interconnector Motor Stool Suction/discharge, Pump Head, and Motor ouplings Intermediate earings Material ISI 431 SS ISI 34 SS lass 3 ast Iron uctile Iron Leadless Tin ronze escription Lower Shaft Stabilizer earing O-Rings Neck Rings oupling Guard Staybolts, Nuts & Washers Mechanical Seal Stationary ace Rotating ace O-Rings Upper and Lower rivers Spring Material Tungsten arbide PM opt:viton, una-n Teflon ISI 34 SS Zinc Plated Steel Tungsten arbide Tungsten arbide PM opt:viton, una-n ISI 34 SS or etter ISI 316 SS iffuser Sleeves Graphite Seal arrier UNI 4 poxy oated Steel earing Ring Tungsten arbide Permissible Operating Pressure urves Pressure in to 11 Stages 23 1 to 5 Stages to Temperature in egrees 34

35 P erk.qxd 1/5/6 3:24 PM Page 35 PVM SRIS ypass Orifice Sizing Head at Orifice (T) /8" Orifice - 3/16" Orifice - 1/4" Orifice - 5/16" Orifice apacity (USGPM) 35

36 P erk.qxd 1/5/6 3:24 PM Page 36 UROR LIMIT WRRNTY urora warrants to the original consumer purchaser ( Purchaser ) of its products that they are free from defects in material or workmanship. If within twelve (12) months from the date of installation or twenty-four (24) months from the date of manufacture any such product shall prove to be defective, it shall be repaired or replaced at urora s option, subject to the terms and conditions set forth below. General Terms and onditions Purchaser must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty shall not apply to products which, in the sole judgement of urora, have been subject to negligence, abuse, accident, misapplication, tampering, alteration; nor due to improper installation, operation, maintenance or storage; nor to other than normal application, use or service, including but not limited to, operational failures caused by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of recommended maximums. Requests for service under this warranty shall be made by contacting the installing urora/wicor dealer as soon as possible after the discovery of any alleged defect. urora will subsequently take corrective action as promptly as reasonably possible. No requests for service under this warranty will be accepted if received more than 3 days after the term of the warranty. The warranty on all three phase submersible motors is void if three-leg overload protection of recommended size is not used. This warranty sets forth urora s sole obligation and purchaser s exclusive remedy for defective products. UROR SHLL NOT LIL OR NY ONSQUNTIL, ININTL, OR ONTINGNT M- GS WHTSOVR. TH ORGOING WRRNTIS R XLUSIV N IN LIU O LL OTHR XPRSS WR- RNTIS. IMPLI WRRNTIS, INLUING UT NOT LIMIT TO TH IMPLI WRRNTIS O MRHNTILITY N ITNSS OR PRTIULR PURPOS, SHLL NOT XTN YON TH URTION O TH PPLIL XPRSS WRRNTIS PROVI HRIN. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. urora Pump, 8 irport Road, North urora, IL 6542 urora Pump 8 irport Road North urora, IL urora Pump, North urora, IL