Vic -300 Butterfly Valves

Size: px

Start display at page:

Download "Vic -300 Butterfly Valves"

Hollie Richard
5 years ago
Views:

R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.

1 R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa). Vic-300 butterfly valves feature a narrow profile disc design with a smooth, coated inner body which combine for superior flow characteristics. This combination results in low break-away torque, reducing gear operator and actuator sizing and costs. Standard polyphenylene sulfide blend (PPS) coating accommodates a wide variety of severe services (epoxy coating is also available for severe services). The dual-seal disc provides bubble-tight sealing up to 300 psi (2065 kpa) in both directions without added valve modifications or cost. vailable disc coatings include PM for water service to +230 (+1 ) and nitrile for oil services with the option of fluoroelastomer for corrosives and aromatics. The Vic-300 butterfly valve is available with manual handles, gear operators or automated in two-way and three-way configurations. or fire protection services, see Series 705W butterfly valve; refer to Section.18. TURS 1 ody and isc ore ast of rugged ductile iron for durability and strength. 2 isc oating isc is encapsulated with various synthetic elastomers to accommodate varied service requirements. - racket onnections 5 - rive ub 6 - ub earing 8 - ub Seals 3 ody oating Polyphenylene sulfide blend is heat fused to the entire body. poxy coating is also available. 4 ual Seal isc Two molded-in rings assure inner body wiping action and a back-up seal for flow in both directions providing bubble-tight shut-off to 300 psi (2065 kpa). 9 - Grooved nds Primary Seals 2 - isc oating 1 - ody 5 rive ub ast integrally with the disc to provide direct disc drive and allow positive location of the disc. 3 - ody oating 6 ub earing 416 stainless steel (316 stainless available) bearing provides positive hub alignment. 1 - isc ore 7 Trunnion 416 stainless steel (316 stainless available) trunnion. 8 ub and Trunnion Seals O- ring seals (of the same material as the disc coating) provide a secondary shaft seal. 4 - ual Seal isc Primary Seals 8 - Trunnion Seals 9 Grooved nds Permits installation with two Victaulic grooved couplings. 7 - Trunnion racket onnections (Vic-300/ Series 608) Side-wing connection permits bracket design to accept varied manual or power actuators. RGISTR TRMRK O VITULI OPYRIGT 2003 VITULI PRINT IN U.S RV Victaulic ompany of merica Phone: PIK-VI ( ) ax: pickvic@victaulic.com Victaulic ompany of anada Phone: ax: viccanada@victaulic.com Victaulic urope Phone: ax: viceuro@victaulic.be Victaulic merica Latina Phone: ax: vical@victaulic.com Victaulic sia Pacific Phone: ax: vicap@victaulic.com

2 IMNSIONS Vic-300 utterfly Valves G G 4" with Gear Operator 2-3" (typical) 4-5" (typical) G G 6" (typical) 2 Position andle vailable 2, 2 1 / 2 & 3 only imensions Inches/millimeters Overall eight Out. Lever Lock/ Lever Lock/ - Inf. Var. Gear Inf. Var. Gear andle Operator andle Operator 4" with Lever Lock andle G , ,7 2 1 / , , , , , , , , , , ,4 139,7 mm , , , ,6 8-12" (typical) , , , , , , , ,6 or 14-24" ( mm) butterfly valves, refer to Large diameter 14-24" ( mm) butterfly valves are available rated to 300 psi (2065 kpa). Request publication prx. Wgt. ach Lbs. kg 2-8" with Locking evice NOT: Vic-300 valves in 6-12" ( mm) sizes are not recommended for use in dry compressed air services. ontact Victaulic ngineering Services for recommendations. 2 Vic-300 utterfly Valves

3 IMNSIONS Lever Lock/Infinitely Variable andle L L K min. (20" extended) J J OPN SUT K iameter imensions Inches/millimeters Outside J K L prx. Wgt. a Lbs./kg , ,7 2 1 / , , , , , , , , ,7 139,7 mm , , , ,7 2-8" Sizes - 12" Sizes , , , , , , , ,4 NOTS: andles for 2-8" ( mm) valves come complete with hardware for both variations. and 12" (250 and 300 mm) equipped with infinitely variable handle only. SUT Two-Position andle K Outside nd to nd imensions Inches/millimeters Overall gt. K prx. Wgt. a. Lbs./kg , ,0 2 1 / , , , , , ,6 Vic-300 utterfly Valves 3

4 IMNSIONS Gear Operator P J N 2 K O1 T Q S N1 L M O 2 R dia. hain Wheel Option In. mm Out. In. mm J K L M imensions Inches/millimeters andwheel hain Wheel No. Turns to lose N 1 O 1 N 2 O 2 P Q R S T , ,8 2 1 / , ,8 76, mm 76, , , , , , ,8 139, mm 139, , , ,8 prx. Wgt. ach Lbs./kg 165, mm 165, , , , , , , ,3 *ontact Victaulic for details. SSORIS hain wheel and Guide hain wheels are mounted to the gear operator handwheels. Sprocket rim and guide arms are made of cast aluminum. hain is galvanized steel. OW TO ORR: Specify type valve and operator by valve numbering system shown on back page. lways specify length of chain required. or insulation and locking device, contact Victaulic for details. iameter Out. Sprocket Size imensions Inches/millimeters hain Wheel Size () Uses hain Trade Size prx. Wgt. a. Lbs./kg ,3-141, , / , , /0 165, , / 2 1/ , ,0 & & /0 250 & ,0 & 323, ,6 Lever Lock with Locking evice Lever Lock racket Insulation 4 Vic-300 utterfly Valves

5 PRORMN V Values V values for flow of water at +60 (+16 ) with various disc positions are shown in tables at right. ormulas for V Values: Q P = V Q = V P Where: Q = low (GPM) P = Pressure rop (PSI) V = low oefficient Outside V (ull Open) Outside V (ull Open) Outside V (ull Open) Outside ,7 mm , ,9 139, ,1 2 1 / , , , , , , ,9 V (ull Open) Outside ,3 2 1 / , , , , ,3 139,7 mm , , , , , ,9 LOW OIINTS V isc Position (egrees open) Vic-300 utterfly Valves 5

6 LOW RTRISTIS PRSSUR ROP PSI/ar 6.0/ / / / / / / / / / / / /.02 LOW O WTR T 65 (18 ) TROUG ULL OPN VLV 2"/60,3 mm 2¹ ₂"/73,0 mm/ 3"/88,9 mm 4"/114,3 mm 5"/141,3 mm/139,7 mm 6"/168,3 mm/ 8"/219,1 mm "/273,0 mm 12"/323,9 mm VI / / ,000 2,000 4,000,000 20, LOW RT GPM /m 3 h VLV TORQU RQUIRMNTS Victaulic Vic-300 valves have low torque requirements for operating the valve. This results in less manual effort, smaller gear operators or smaller, less expensive actuators to open and close the valve. The torque data listed below is the highest required to operate the valve at the given pressures in wet service. These torque values are based on extensive testing by Victaulic. These values are for normal wet service only and may vary for dry services or for lubricating fluids. ontact Victaulic for other services. iameter Outside Torque Inch Pounds/Newton Meters *ifferential Pressure PSI/ar 50/3 0/7 150/ 200/14 300/ ,3 3,4 4,5 5,7 6,8 7,9 2 1 / ,0 5,7 6,8 9,0,7 13, ,1 5,7 6,8 9,0,7 13, ,9 7,9,2 12,4 14,7 19, ,3 17,0 28,3 28,3 39,5 56, ,3 33,9 39,5 39,5 50,8 62,1 139,7 mm ,7 33,9 39,5 39,5 50,8 62, ,3 56,5 67,8 79,1 90,4 7, ,1 56,5 67,8 79,1 90,4 7, , , , Vic-300 utterfly Valves

7 MTRIL SPIITIONS ody: uctile iron conforming to STM -395, grade , and STM -536, grade ody oating: PPS Polyphenylene sulfide blend, UL classified in accordance with NSI/NS 61 for cold +86 (+30 ) and hot +180 (+82 ) potable water service. Optional: poxy isc: uctile iron conforming to STM -536 isc oating: (specify choice) Grade PM PM (Green color code). Temperature range 30 to +230 ( 34 to +1 ). Recommended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with NSI/NS 61 for cold +86 (+30 ) and hot +180 (+82 ) potable water service. NOT ROMMN OR PTROLUM SRVIS. Grade T nitrile Nitrile (Orange color code). Temperature range 20 to +180 ( 29 to +82 ). Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150 (+66 ) or for hot dry air over +140 (+60 ). Optional: Grade O fluoroelastomer luoroelastomer (lue color code). Temperature range for continuous service up to +300 (+149 ). Recommended for many oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons to +300 (+149 ). *Services listed are General Service Recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a listing of services which are not recommended. NOT: When connecting Vic-300 butterfly valves to Style 741 or Style 743 Vic-lange adapters, please contact Victaulic. rive ub dapter: ot rolled steel, black enamel coated Upper earing/lower Trunnion Seals: Same as isc oating Upper earing/lower Trunnion: 416 stainless steel Optional: Type 316 stainless steel (standard when Grade O fluoroelastomer is specified) Operator racket: ot rolled steel, black enamel coated racket olts/washers: old rolled steel, zinc plated Operator: (specify choice) 2-3" (50-80 mm) Two-position detent manual handle: ot rolled steel, black enamel coated Manual lever lock/infinitely variable handle: ot rolled steel, black enamel coated Manual gear operator with handwheel Optional: Memory stop Optional: hain wheel lectric actuator Pneumatic actuator Sizing of actuator is dependent on service. ontact Victaulic for details. Vic-300 utterfly Valves 7

8 IMPORTNT INSTLLTION ONSIRTIONS or installing a Victaulic butterfly valve into a piping system, follow the instructions supplied with the coupling. Refer to the notes below for applications/limitations. O NOT INSTLL UTTRLY VLVS INTO T SYSTM WIT T IS IN T ULLY OPN POSITION. When using butterfly valves for throttling service, Victaulic recommends the disc be positioned no less than 30 degrees open. or best results, the disc should be between 30 and 70 degrees open. igh pipeline velocities and/or throttling with the disc less than 30 degrees open may result in noise, vibration, cavitation, severe line erosion, and/or loss of control. or details regarding throttling services, contact Victaulic. Victaulic recommends that flow velocities for water service are limited to 20 ft/sec (6,1 m/sec). When higher flow velocities are necessary, contact Victaulic. When dealing with flow media other than water, contact Victaulic. NOT: Vic-300 valves in 6-12" ( mm) sizes are not recommended for use in dry compressed air services. ontact Victaulic ngineering Services for recommendations. Victaulic utterfly Valves are designed with grooved ends for use with grooved pipe couplings. If flange connections are required, refer to the following notes regarding Vic-lange dapter restrictions. Style 741 Vic-lange dapters can be used only on one side of 2-8 inch ( mm) Vic-300 utterfly Valves. Style 741 Vic-lange dapters cannot be used on - 12 inch ( mm) Vic-300 utterfly Valves. Vic-300 utterfly Valves cannot be directly connected to flanged components with Style 743 Vic- lange dapters. No. 46 NSI 300 groove by flange adapter is required. utterfly Valve Numbering System for Vic-300 V Size ig. Type In. No. V ¹ ₂ " 030 4" 040 5" ,7 mm 139 6" " 080 " 0 12" 120 Pressure Rating ody isc/trim racket Operator psi 3 - poxy coated iron 5 - PPS coated iron 9 - Special* 1 - Nitrile/ronze-"T" 2 - PM/ronze-"" 3 - luoroelastomer/ Stainless Steel-"O" 4 - Nitrile/Stainless Steel- "T" 5 - PM/Stainless Steel- "" 9 - Special* NOTS: (2) Used with 2 position detent handle only * etails required 0 - No racket (2) 2 - Standard 3 - Standard with insulation 9 - Special* 00 -are 11 -Lever handle with memory stop 15-2 position detent handle (sizes 2", 2¹ ₂", 76.1 mm & 3" only) 20 -Gear operator 21 -Gear operator with memory stop 22 -Gear operator with chain wheel 23 -Gear operator with WW square oper. nut 24 -Gear operator with memory stop and chain wheel 29 -Non-std. gear operator* VV - Pneumatic* WW - lectric* YY - ydraulic* L - position handle with tamperproof lever handle This product shall be manufactured by Victaulic ompany. ll products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. 8 Vic-300 utterfly Valves

Vic -300 Butterfly Valves

R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).