DeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

Size: px
Start display at page:

Download "DeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS"

Transcription

1 BULLETIN B JUNE 2015 ezuri SL-LA SLURRY NIFE GATE VALVES TECNICAL SPECIFICATIONS

2 Materials of Construction Item escription Material A1 Body uctile Iron, ASTM A536, Grade A2 Gate 316 Stainless Steel, ASTM A240 Type P Stainless Steel 900 eat Treated, ASTM A uplex Stainless Steel, ASTM A240 Type 2205 uplex 316 Stainless Steel, ASTM A240 Type 316 with a hardened nickel based non-stick coating 17-4 P Stainless Steel 900 eat Treated, ASTM A564 with a hardened nickel based non-stick coating 2205 uplex Stainless Steel, ASTM A240 with a hardened nickel based non-stick coating A3 Sleeve NR - Natural Rubber to 177 F (81 C) NBR - ydrogenated Nitrile Butadiene to 300 F (150 C) EPM - Terpolymer of Ethylene, Propylene & a iene, to 250 F (120 C) A4 Sleeve Retainer NR - Natural Rubber to 177 F (81 C) EPM - Terpolymer of Ethylene, Propylene & a iene, to 250 F (120 C) NBR - ydrogenated Nitrile Butadiene to 300 F (150 C) A5 Body Gasket uralon 8500 A6 Top Seal EPM - Terpolymer of Ethylene, Propylene & a iene, to 250 F (120 C) ydrogenated Nitrile Butadiene to 300 F (150 C) A7 rain Gasket uralon 8500 (P Option) A8 rain Plate Carbon Steel, ASTM A36 (P Option) A9 Grease Fitting Steel A10 Screw Carbon Steel, Zinc Plated A11 Screw Carbon Steel, Zinc Plated A12 Washer Carbon Steel, Zinc Plated A13 Lockwasher Carbon Steel, Zinc Plated A14 Nut Carbon Steel, Zinc Plated A15 Screw Carbon Steel, Zinc Plated (P Option) A16 Washer Carbon Steel, Zinc Plated (P Option) A17 Screw Carbon Steel, Zinc Plated A18 Washer Carbon Steel, Zinc Plated A19 Screw Carbon Steel, Zinc Plated A20 Nut Carbon Steel, Zinc Plated ezuri, Inc.

3 Selection Shut-Off Capabilities Flow Parameters 2-2 (50-) riptight NOTE: Leakage expected during actuation Pressure Ratings (Ambient Temperatures) 2-2 (50-) igher pressures available on application Applicable Standards psi C.W.P. kpa ezuri SL-LA nife Gate s are designed and/or tested to meet the following standards: ASME B16.5/150 ASME B16.5 Class 150 Flange rilling IN 10 Metric 10 bar Flange rilling IN 16 Metric 16 bar Flange rilling AS2129 Table Australian Table Flange rilling AS2129 Table E Australian Table E Flange rilling SANS South African 0 kpa Flange rilling SANS South African 1600 kpa Flange rilling mm Cv* v* % Open ** (resistance) Port Area (in 2 /cm 2 ) *Cv = Flow in GPM of water at 1 psi pressure drop. v = Flow in m3/hr. of water at kpa pressure drop. ** = The resistance coefficient of the valve. The constant () can be used to determine the equivalent length of pipe. L= x Where f L = Equivalent length of pipe in feet = Resistance coefficient = Pipe diameter in feet f = Friction factor, related to type of pipe Weights Basic With andwheel With Chainwheel With Bevel Gear andwheel Standard 90º With Bevel Gear Chainwheel Standard 90º Pneumatic Cylinder ydraulic Cylinder mm

4 Ordering To order, simply complete the valve order code from information shown. An ordering example is shown for your reference. Style Give valve style code as follows: SL = Slurry nife Gate Top Seal Give top seal material code as follows: EPM = Terpolymer of Ethylene, Propylene & a iene, to 250 F (120 C) NBR = ydrogenated Nitrile Butadiene to 300 F (150 C) Give valve size code as follows: 2 = () 12 = () 3 = () 14 = 1 (3) 4 = (mm) 16 = 1 () 5 = () 18 = 1 (4) 6 = () 20 = () 8 = () 24 = 2 () 10 = () s 2 (5) and 26-60" (650-1) are available on application. Contact ezuri for more information. Gate Material Give gate material code as follows: S2 = 316 Stainless Steel S5 = 17-4 Stainless Steel 900 eat Treated S10 = 2205 uplex Stainless Steel S2C = 316 Stainless Steel with a hardened nickel-based, nonstick coating S5C = 17-4P Stainless Steel 900 eat Treated with a hardened nickel-based, nonstick coating S10C = 2205 uplex Stainless Steel with a hardened nickel-based, nonstick coating Body Style Give body style code as follows: LA = Long Body Style Sleeve Material Give sleeve material code as follows: NR = Natural Rubber to 177 F (81 C) EPM = Terpolymer of Ethylene, Propylene & a iene, to 250 F (120 C) NBR = ydrogenated Nitrile Butadiene to 300 F (150 C) End Connection Give end connection code as follows: F1 = ASME B16.5 Class 150 UNC Tapping for Threads F110 = ISO 7005/PN10 rilling F116 = ISO 7005/PN16 rilling F1A = AS2129 Table rilling F1EA = AS2129 Table E rilling F1S10 = SANS F1S16 = SANS Body Material Give body material code as follows: I = uctile Iron Other body materials are available on application Options Give option code as follows: = Paint Options (Contact ezuri) CRT = Certified Physical and Chemical Test Reports (body & gate only) CMC = Certificate of Material Conformance P = rain Plate FLS = Sleeve Retainer Flange Seals, 2- (50-) valves only. Sleeve Retainer Flange Seals are inlcuded as standard on () and larger valves SL,6,LA,F1,I,EPM,S2,NR,P*actuator 4

5 Manual Actuators andwheel and Chainwheel Actuators All 2- (50-) valves can be furnished with handwheel or chainwheel actuators. To order, add the appropriate order code to the basic valve order code. Refer to information on bevel gear actuators when pressures exceed limits shown. Actuator sizing is for slurries and liquids; contact ezuri for sizing on dry materials applications. Order chain for chainwheel actatuors as a separate item. andwheel Actuator Chainwheel Actuator mm Order Code Carbon Steel (CS) Yoke MN-12-CS MN-12-CS MN-12-CS MN-12-CS MN-16-CS MN-20-CS MN-20-CS Maximum Shutoff Pressure ifferential psi/kpa mm Order Code Carbon Steel (CS) Yoke MN-CW12-CS MN-CW12-CS MN-CW12-CS MN-CW12-CS MN-CW20-CS MN-CW20-CS MN-CW20-CS Maximum Shutoff Pressure ifferential psi/kpa SL,6,LA,F1,I,EPM,S2,NR,P*MN-16-CS Bevel Gear Actuators Bevel gear actuators are available on 3-2 (80-) valves with handwheel or chainwheel actuators. Bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of a standard handwheel or chainwheel. A mechanical advantage makes large valve operation easier and faster. Actuator sizing is for slurries and liquids; contact ezuri for sizing on dry materials applications. Bevel Gear andwheel Actuator Bevel Gear Chainwheel Actuator Order Maximum Code Shutoff Carbon Pressure Steel (CS) ifferential Yoke psi/kpa MNB-12-CS mm MNB-12-CS MNB-12-CS MNB-12-CS MNB-12-CS MNB-24-CS MNB-24-CS 1 3 MNB-24-CS 1 MNB-24-CS 1 4 MNB-24-CS MNB-24-CS 2 MNB-24-CS Order Maximum Code Shutoff Carbon Pressure Steel (CS) ifferential Yoke psi/kpa MNB-CW12-CS mm MNB-CW12-CS MNB-CW12-CS MNB-CW12-CS MNB-CW12-CS MNB-CW20-CS MNB-CW20-CS 1 3 MNB-CW20-CS 1 MNB-CW20-CS 1 4 MNB-CW20-CS MNB-CW20-CS 2 MNB-CW20-CS SL,6,LA,F1,I,EPM,S2,NR,P*MNB-12-CS 5

6 Manual Actuator Accessories Chain for Chainwheel Actuators Order as a separate item by giving the correct code and specify required length of chain as second line information. One closing link is supplied with the chainwheel actuator. Order Code escription ACC*CN102 Steel, Zinc Plated 3/16 ACC*CN103 Galvanized 3/16 ACC*CN Stainless Steel 3/16 ACC*CN102 Chain 12 feet long (366cm) Full-Force Lockout evice Lockouts for open and closed position are available on all sizes of handwheel, bevel gear handwheel and cylinder actuated valves. Lockouts are designed to hold the full actuator force, plus a safety factor. To order, add a comma and the order code "L" after the actuator code. SL,6,LA,F1,I,EPM,S2,NR,P*MNB-12-CS,L Pneumatic Cylinder Actuators ezuri double-acting pneumatic cylinder actuators are available for on/off service. Supply pressure is 60 or 80 psi (410 or kpa). To order, add the proper code from the table to the valve order code. Actuator sizing is for slurries and liquids; contact ezuri for sizing on dry materials applications. 60 psi (410 kpa) Air Supply 80 psi ( kpa) Air Supply mm Order Code Carbon Steel (CS) Yoke CY-PC4-CS CY-PC8-CS CY-PC10-CS CY-PC12-CS CY-PC12-CS CY-PC14-CS CY-PC14-CS CY-PC16-CS CY-PC16-CS Maximum Shutoff Pressure ifferential psi/kpa mm Order Code Carbon Steel (CS) Yoke CY-PC4-CS CY-PC8-CS CY-PC10-CS CY-PC12-CS CY-PC12-CS CY-PC14-CS CY-PC14-CS CY-PC16-CS CY-PC16-CS Maximum Shutoff Pressure ifferential psi/kpa 6

7 ydraulic Cylinder Actuators ouble-acting hydraulic cylinders are available for on/off service. All actuators are sized to the full pressure rating of the valve. Actuator sizing is for slurries and liquids; contact ezuri for sizing on dry materials applications. mm Order Code Carbon Steel (CS) Yoke CY-C1.5-CS CY-C1.5-CS CY-C1.5-CS CY-C2-CS CY-C2-CS CY-C2-CS CY-C3.25-CS CY-C3.25-CS CY-C4-CS CY-C4-CS CY-C4-CS CY-C5-CS CY-C5-CS Fluid Supply Pressure (psi/kpa) Maximum Shutoff Pressure ifferential psi/kpa Note: The maximum hydraulic pressure rating for hydraulic cylinders by size is as follows: C1.5 is 2000 psi C2 is 2000 psi C3.25 is 0 psi C4 is 800 psi C5 is 950 psi 7

8 Cylinder Actuator Accessories Filter Regulator The ezuri Filter Regulator is designed to provide clean, accurate pressure to cylinder actuators. Four-Way Solenoid Solenoid valves may be ordered mounted and piped as part of a complete valve and cylinder actuator assembly or as a separate item. Speed Control s Speed Control s are available for controlling valve opening or closing speed with cylinder actuators. Position Indicating Switches Mechanical or Proximity Position Indicating Switches are available for use on cylinder actuators. One switch can be set to indicate open or closed position. Two switches will automatically be set to indicate full open and full closed positions. Stem Cover Bellows To protect valve stem from environmental debris, the Stem Cover Bellows may be ordered as part of a complete valve and actuator assembly. SL,6,LA,F1,I,EPM,S2,NR,P*,SCB Full-Force Lockout evice Lockouts for open and closed position are available on all sizes for cylinder actuated valves. Lockouts are desinged to hold the full actuator force, plus a safety factor. To order, add a comma and the order code L after the actuator code. SL,6,LA,F1,I,EPM,S2,NR,P*,L Electric Motor Actuators ezuri nife Gate s can be furnished with electric motor actuators including Limitorque, Auma, Rotork, E.I.M. and others. When ordering electric motor actuators, specify valve order code, shutoff pressure, service conditions (flowing media and installation direction); type of application (on/off); speed of operation; NEMA rating (4, 7, as per specification requirements.submersible, etc.); electrical characteristics (voltage and phase); actuator accessories and controls 8

9 imensions andwheel & Chainwheel mm E* Installed imensions G andwheel G Chainwheel * Retainer flanges are standard on () and larger, and optional on 2- (50-). If retainer flanges are not required, deduct 1.00" (25mm). Allow an additional " (6-13mm) for installation. andwheel ø G INSTALLE Chainwheel J TOP OF STEM IN OPEN POSITION TOP OF GATE IN OPEN POSITION TOP OF STEM IN OPEN POSITION øg Inches Millimeters TOP OF GATE IN OPEN POSITION INSTALLE Bevel Gear andwheel mm E* Installed imensions G Standard egree J Standard INSTALLE ø G 90 egree ø G * Ratainer flanges are standard on () and larger, and optional on 2- (50-). If retainer flanges are not required, deduct 1.00" (25mm). Allow an additional " (6-13mm) for installation. Inches Millimeters INSTALLE 9

10 imensions Bevel Gear Chainwheel mm E* Installed G imensions Standard egree Standard INSTALLE ø G * Retainer flanges are standard on () and larger, and optional on 2- (50-). If retainer flanges are not required, deduct 1.00" (25mm). Allow an additional " (6-13mm) for installation. Inches Millimeters 90 egree ø G INSTALLE 10

11 imensions Pneumatic Cylinder mm imensions E* Installed L INSTALLE L * Retainer flanges are standard on () and larger, and optional on 2- (50-). If retainer flanges are not required, deduct 1.00" (25mm). Allow an additional " (6-13mm) for installation. Inches Millimeters ydraulic Cylinder mm imensions E* Installed L INSTALLE L * Retainer flanges are standard on () and larger, and optional on 2- (50-). If retainer flanges are not required, deduct 1.00" (25mm). Allow an additional " (6-13mm) for installation. Inches Millimeters 11

12 Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: Riverside Ave. N. Sartell, Minnesota Phone: Fax: ezuri, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. esign features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by ezuri, Inc. Certified drawings are available upon request. Printed in the U.S.A.

BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS BULLETIN 52.00-1D NOVEMBER 2016 DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A395, Grade 65-45-15, ASTM

More information

BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS BUETIN 3-1H JUNE 2016 DeZURIK KGC-BD BI-DIRECTIONA CAST STAINESS STEE KNIFE GATE VAVES TECHNICA SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel, ASTM A3 CF8

More information

BULLETIN B MAY DeZURIK KGN UNIDIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS

BULLETIN B MAY DeZURIK KGN UNIDIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS BULLETIN 2-1B MAY 2013 DeZURIK KGN UNIDIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel ASTM A351

More information

DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS

DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS BULLETIN 46.00-4 MARCH 2015 DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A536, 65-45-12

More information

DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

DeZURIK BOS-US 2-20 (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions

More information

BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)

More information

APCO SURGE RELIEF ANGLE VALVES (SRA)

APCO SURGE RELIEF ANGLE VALVES (SRA) BULLETIN 3000 MARCH 2018 APCO SURGE RELIEF ANGLE VALVES (SRA) Design & Construction APCO Surge Relief Angle Valves (SRA) are designed to limit surge pressure and the potential damage to the pump system.

More information

BULLETIN B FEBRUARY DeZURIK PEF 100% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS

BULLETIN B FEBRUARY DeZURIK PEF 100% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS BULLETIN.60-B FEBRUARY 0 DeZURIK PEF 00% PORT ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A Body Cast Iron, ASTM A6, Class B A Body Bearing 36L Stainless

More information

KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN MAY 2003

KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN MAY 2003 KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1 MAY 2003 KGC CAST STAINLESS STEEL KNIFE GATE VALVES Design and Construction DeZURIK Cast Knife Gate Valves (KGC) are designed for on-off and

More information

APCO CVS-250/250A SWING CHECK VALVES

APCO CVS-250/250A SWING CHECK VALVES BULLETIN 250 NOVEMBER 2014 APO VS-250/250A SWING EK VALVES Design and onstruction APO VS-250/250A Swing heck Valves are used to prevent the backflow of fluid by closing before flow reversal. They are installed

More information

BULLETIN A DECEMBER DeZURIK.5 3" (15 80mm) PEC ECCENTRIC PLUG VALVES

BULLETIN A DECEMBER DeZURIK.5 3 (15 80mm) PEC ECCENTRIC PLUG VALVES BULLETIN 12.00-1A DECEMBER 2011 DeZURIK.5 3" (15 80mm) PEC ECCENTRIC PLUG VALVES Time-Tested Quality In thousands of installations worldwide, DeZURIK Eccentric Plug Valves have a proven record of long-term

More information

BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS

BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:

More information

BULLETIN D SEPTEMBER " (100mm) & LARGER PEC ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS

BULLETIN D SEPTEMBER  (100mm) & LARGER PEC ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS BULLETIN 12.00-1D SEPTEMBER 9 (mm) & LARGER PEC ECCENTRIC PLUG VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material Cast Iron, ASTM A126, Class B A1 A2 A3 Body Body Bearing

More information

BULLETIN B JANUARY DeZURIK ROTARY DIAPHRAGM ACTUATORS TECHNICAL SPECIFICATIONS

BULLETIN B JANUARY DeZURIK ROTARY DIAPHRAGM ACTUATORS TECHNICAL SPECIFICATIONS ULLETIN 70.00-1 JNURY 2017 DeZURIK ROTRY DIPHRGM CTUTORS TECHNICL SPECIFICTIONS Materials of Construction DR-40 Item Description Material 1 Diaphragm Cover 316 Stainless Steel, STM 240/276 13 15 20 5 29

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

APCO SLANTING DISC CHECK VALVES

APCO SLANTING DISC CHECK VALVES BULLETIN 800 JULY 2011 APCO SLANTING DISC CHECK VALVES Series 800, 800B, 800T APCO Slanting Disc Check Valve With decades of experience to guarantee reliability and outstanding performance, our Slanting

More information

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical

More information

Fabri-Valve Push Through Slurry Valve SV1. Engineered Valves

Fabri-Valve Push Through Slurry Valve SV1. Engineered Valves Fabri-Valve Push Through Slurry Valve SV1 Engineered Valves Fabri-Valve SV1 - Push Through Slurry Valve The Fabri-Valve SV1 Push-Through Slurry Valve is one of the most versatile knife gate valve configurations

More information

BULLETIN APRIL DeZURIK VPB V-PORT BALL VALVES

BULLETIN APRIL DeZURIK VPB V-PORT BALL VALVES BULLETIN 15.00-1 APRIL 2017 DeZURIK VPB V-PORT BALL VALVES VPB V-Port Ball Valves Design and Construction DeZURIK V-Port Ball valves deliver superior performance and reliability required to optimize process

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

APCO CVS-6000/6000A SWING CHECK VALVES

APCO CVS-6000/6000A SWING CHECK VALVES ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,

More information

Fabri-Valve. CF33/CF133 Ported Slide Gate Valve

Fabri-Valve. CF33/CF133 Ported Slide Gate Valve Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service

More information

BULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES

BULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly

More information

DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES

DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES BULLETIN 45.00-1 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Fabri-Valve XS150. Knife Gate Valve

Fabri-Valve XS150. Knife Gate Valve Fabri-Valve XS150 Knife Gate Valve XS150 XS150 High Performance Knife Gate Valve The Fabri-Valve XS150 High Performance Knife Gate valve features a robust perimeter seal that provides bi-directional bubble

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly

More information

BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES

BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES APCO Convertible Swing Check Valves Engineer: APCO is a unique check valve manufacturer. We are unique because we manufacture seven different

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

GL-1601C (EN) GLOBE VALVE

GL-1601C (EN) GLOBE VALVE GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

DeZURIK KUL KNIFE GATE VALVES

DeZURIK KUL KNIFE GATE VALVES KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

APCO ASU COMBINATION AIR VALVE

APCO ASU COMBINATION AIR VALVE BULLETIN 300.00-1 JANUARY 2016 APCO ASU COMBINATION AIR VALVE - Design - Operation - Performance www.dezurik.com Innovative Air Valve Technology The APCO ASU Combination Air Valve introduces an innovative

More information

BULLETIN NOVEMBER DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

BULLETIN NOVEMBER DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES TECHNICAL SPECIFICATIONS BULLETIN 45.00-2 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES TECHNICAL SPECIFICATIONS Materials of Construction A3 Disc A5 Pin Disc Pinning 14" & larger (350mm & larger) 2 2017 DeZURIK,

More information

Fabri-Valve. CF37 Heavy Duty Knife Gate Valve

Fabri-Valve. CF37 Heavy Duty Knife Gate Valve Fabri-Valve CF37 Heavy Duty Knife Gate Valve CF37 Heavy Duty Knife Gate Valve Fabri-Valve Figures C37 and F37 are some of the most popular knife gate valve configurations. Figure C37 knife gate valves

More information

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low

More information

KEY PORT SERIES 400 ECCENTRIC VALVES

KEY PORT SERIES 400 ECCENTRIC VALVES ISO 9001:2008 Certified QMS KEY PORT SERIES 400 ECCENTRIC VALVES The valve of choice for over 50 years. Now that s dependability! Compact Size Light Weight UL Listed Proven Design Bulletin 11.00-1 August,

More information

UNIWORLD series PNEUMATIC VALVES

UNIWORLD series PNEUMATIC VALVES UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

Fabri-Valve. C67 Bi-Directional Knife Gate Valve

Fabri-Valve. C67 Bi-Directional Knife Gate Valve Fabri-Valve C67 Bi-Directional Knife Gate Valve C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal

More information

Keystone knife gate valves Figure OS1700

Keystone knife gate valves Figure OS1700 Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to

More information

VA/VG Series On/Off and Shut-off Valve

VA/VG Series On/Off and Shut-off Valve VA/VG Series On/Off and Shut-off DVAVG862X02 Specifications For other materials or modifications, please consult TESCOM. PARAMETERS Pressure rating per criteria of ANSI/ASME B3.3 Maximum Operating Pressure

More information

Baumann Corrosion Resistant Control Valve

Baumann Corrosion Resistant Control Valve Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and

More information

KEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed

KEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed KEY PORT SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed CSA Certified Bulletin 11.00-1 September, 2006 UL Listed CSA Certified A Unit of Southern Manufacturing Group, Inc. Design & Construction

More information

KEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed

KEY PORT SERIES 400 ECCENTRIC VALVES. Compact Size. Light Weight. UL Listed. CSA Certified. CSA Certified. UL Listed KEY PORT SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed CSA Certified Bulletin 11.00-1 September, 2006 UL Listed A Unit of Southern Manufacturing Group, Inc. CSA Certified Design & Construction

More information

DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES

DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES Instruction D11023 October 2016 Instructions These instructions provide information about KGN-RSB Knife Gate Valves. They are

More information

BI-DIRECTIONAL KNIFE GATE VALVE

BI-DIRECTIONAL KNIFE GATE VALVE Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm

More information

HD150/HD300 Heavy Duty Knife Gate Valve

HD150/HD300 Heavy Duty Knife Gate Valve Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy

More information

NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL Previously manufactured by Dezurik and Honeywell

NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL Previously manufactured by Dezurik and Honeywell 516.01-3NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL 1901 Previously manufactured by Dezurik and Honeywell Description: Models 1601 and 1901 three-way valves combine with pneumatic,

More information

BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.

BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc. BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with

More information

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)

Cover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued) DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque

More information

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer

More information

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)

More information

08.12 Vic-Plug Balancing Valve

08.12 Vic-Plug Balancing Valve Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

KEY PORT VALVE SERIES 400 ECCENTRIC VALVES Compact Size. Light Weight. UL Listed. AGA and CGA Approved. Bulletin

KEY PORT VALVE SERIES 400 ECCENTRIC VALVES Compact Size. Light Weight. UL Listed. AGA and CGA Approved. Bulletin KEY PORT VALVE SERIES 400 ECCENTRIC VALVES Compact Size Light Weight UL Listed AGA and CGA Approved Key Port Valve is a unit of SMG Southern Manufacturing Group, Inc. UL Listed CGA and AGA Approved Bulletin

More information

North. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve

North. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5

More information

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with

More information

Series 706 Butterfly Valves (300 PSI/2065 kpa)

Series 706 Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers

More information

Series W709 AGS Butterfly Valves (175 psi/1270 kpa)

Series W709 AGS Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)

More information

DeZURIK 2 20" BOS BUTTERFLY VALVES

DeZURIK 2 20 BOS BUTTERFLY VALVES 2 20" BOS BUTTERFLY VALVES Instruction D10459 October 2013 2-20 BOS Butterfly Valves Instructions These instructions provide information about BOS Butterfly Valves. They are for use by personnel who are

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3 Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure

More information

Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page

Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

Style 99 Roust-A-Bout Couplings

Style 99 Roust-A-Bout Couplings R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

More information

DeZURIK KSV CL150 & CL300 BONNETLESS KNIFE GATE VALVES

DeZURIK KSV CL150 & CL300 BONNETLESS KNIFE GATE VALVES KSV CL150 & CL300 BONNETLESS KNIFE GATE VALVES Instruction D11021 October 2016 Instructions These instructions provide information about DeZURIK KSV CL150 & CL300 knife gate valves. They are intended for

More information

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

Knife gate valve HG - Standard

Knife gate valve HG - Standard Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow

More information

DEWRANCE. Check Valve Bled Steam

DEWRANCE. Check Valve Bled Steam Check Valve Bled Steam DEWRANCE Features & Benefits Excellent Reliability - Internal Counterweight to balance disc under low load conditions - Direct deposited seats - Tilting disc design for quick closing

More information

Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM

Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes

More information

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell 786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage

More information

with the specific application. Always read and understand the installation

with the specific application. Always read and understand the installation Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.

More information

Center line Resilient Seated Butterfly Valves

Center line Resilient Seated Butterfly Valves Center line Resilient Seated utterfly Valves Center Line has been a market leader in quarter-turn valves for more than 0 years, and we have earned a reputation as a supplier of superior valves at competitive

More information

Paramax Series Control Ball Valve. Specification Data CM6004 7/97

Paramax Series Control Ball Valve. Specification Data CM6004 7/97 Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................

More information

APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES

APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES Instruction D12043 June 2016 DeZURIK Instructions These instructions provide installation, operation and maintenance information for APCO CRF-100A Rubber

More information

BI-DIRECTIONAL KNIFE GATE VALVE

BI-DIRECTIONAL KNIFE GATE VALVE BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

butterfly valves Quality, Service A history of and Innovation

butterfly valves Quality, Service A history of and Innovation A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters

More information

Series 709 Butterfly Valves (175 psi/1270 kpa)

Series 709 Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

GA-1601B (EN) GATE VALVE

GA-1601B (EN) GATE VALVE GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

A Zy-Tech Global Industries Product

A Zy-Tech Global Industries Product A Zy-Tech Global Industries Product Worm & evel Gear Operators Another quality product from Zy-Tech Global Industries, Inc. Zy-Gear gear operators are designed for long lasting dependable service in oil

More information

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL Previously manufactured by Dezurik and Honeywell

NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL Previously manufactured by Dezurik and Honeywell 391.01-3NE January 2016 SINGLE SEATED CAGE VALVES SERIES 9100 MODEL 9101 Previously manufactured by Dezurik and Honeywell Description: Model 9101 valve combines a heavy, duty, single-seated, cage-type

More information

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax: Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information

More information

DeZURIK VPB V-PORT BALL VALVES

DeZURIK VPB V-PORT BALL VALVES VPB V-PORT BALL VALVES Instruction D10324 June 2017 Instructions These instructions provide information about. They are for use by personnel who are responsible for installation, operation and maintenance

More information

CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves

CE43 1 (DN25) to 4 (DN100) Carbon Steel Cage Design, Two Port Control Valves Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards

More information

Knife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3

Knife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3 Knife gate valve SLF Data is only for informational purpose. All specifications are subject to change without notice. V R 1 2013-02-15 issue 3 Knife gate valve SLF Stafsjö s knife gate valve SLF is a flanged

More information

APCO ASR-400/450 SEWAGE AIR RELEASE VALVES

APCO ASR-400/450 SEWAGE AIR RELEASE VALVES APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage

More information

Worcester Controls Directional Ball Valves

Worcester Controls Directional Ball Valves Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,

More information

KREBS Technequip. TGW wafer style slurry valves. TGW series valves for slurry applications

KREBS Technequip. TGW wafer style slurry valves. TGW series valves for slurry applications KREBS Technequip TGW wafer style slurry valves TGW series valves for slurry applications 2 Technequip wafer style knife gate valves Applications Mining and mineral processing Mineral sands Cement Sand

More information

Recommended spare parts are listed on the assembly drawing. These parts should be stocked to minimize downtime.

Recommended spare parts are listed on the assembly drawing. These parts should be stocked to minimize downtime. Instruction D10411 July 2018 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KGC knife gate valve, including models

More information

Vic -300 Butterfly Valves

Vic -300 Butterfly Valves R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).

More information