The BVA Advantage. Confidence Built on Quality

Transcription

1 1

2 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift, Pro-Lift, lackhawk, Porto-Power, one reeper, Omega Lighting and Save Phace. Shinn u was founded in Taiwan in 1971 and began doing business in the United States in Shinn u has over 2,000 mployees worldwide with its headquarters in Taipei, Taiwan. ISO 9001 onfidence uilt on Quality V products are manufactured through an International Quality ssurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control. Under this system, the related operations are monitored on all aspects from the purchase order to the assembly line and through to shipping the order. SM 30.1 NSI 40.1 S 100 Products comply with the following industry standards The cylinders comply with load testing requirements and / or the safety factor for material yield strength while still functioning properly without oil leakage. V pressure gauges meet the criteria for grade. V hydraulic hoses comply with the Material Handling Institute s specification of minimum life cycles and minimum burst pressure rating. V Limited Lifetime Warranty V products are warranted to be free of defects in materials and workmanship. ny V product that does not conform to specification will be repaired or credited (at V s option) at V s expense for the life of the product. ontact V for disposition of this warranty. This warranty does not cover ordinary wear and tear, abuse, misuse, alteration, or use of improper fluids or maintenance as determined by V and its authorized service centers. ll electric motors, gas engines, batteries and other parts or materials sold with or part of V products but are separately warranted by another manufacturer, are covered by that manufacturer s warranty and not the V Lifetime Warranty. V shall not be liable for consequential or incidental damage or loss. Repair Parts We offer a large range of product replacement parts, please contact your V dealer for more details. ontact Us or technical support, call or questions about your product, contact your local V dealer. V Website To view our most up-to-date catalog or view our new product, visit our website:

3 Index s H 6 HU 16 HL 26 HULN 32 H 36 HP 41 HU 10 H 18 H 28 HLN 33 H 38 HT 42 H 12 H 22 HLN 30 ccessories 34 HU/HU 40 HP 43 Pages 6-43 Pumps P P Single cting Hand Pumps ouble cting Hand Pumps PR Rotary ir 49 Pumps P ll Position 50 ir Pumps P ouble cting 50 ir Pumps P 1-Phase 52 lectric Pumps P as ngine 60 Pumps P iesel ngine 60 Pumps P57 oot Pumps 48 P Single cting 50 ir Pumps P 3-Phase 56 lectric Pumps PU Universal Motor 63 Pumps Pages ombo Kits H eneral Purpose ombinations 64 HL Low Profile ombinations 65 H lat ody ombinations 64 HLN Lock Nut ombinations 65 H Hollow Hole ombinations 65 HU luminum ombinations 65 Pages ontrol Valves & ccessories low ontrol Valves 66 auge dapters 69 Solenoid Valves 70 Wireless ontroller 71 Pressure Switch 72 irectional ontrol Valves 74 Manifolds 68 Hydraulic Oil 70 Hydraulic ouplers 71 xternal Pressure dj 71 Hydraulic Hoses 72 ittings 75 Pressure auges 69 oupler ust over 70 oot Pedals 71 Manifold locks 72 Pump Mounted Valves 73 Pages Presses/Tools Movable Head Shop Presses ixed Head Shop Presses Shop Press ccessories 77 Shop Press uards lange Spreaders uck ill Spreaders Oil ield Valve Seat Pullers luminum w/ ase/needle Valve 82 Hydraulic ear Pullers Mechanical ear Pullers 81 Hydraulic ench Vise 82 Nut Splitters Pages Maintenance Kits/ottle Jacks Maintenance Kits/Rail s 85 Manual ottle Jacks 88 Mini Jacks 89 Lifting ags 86 ir/manual ottle Jacks 88 OMNI ll-position Jacks 89 Lifting ag ccessories 87 Toe Jacks 88 Orbital Jacks 89 Pages ross-reference & ngineering V ross Reference hart 90 Hydraulic ormula Reference 94 Safety Instructions 92 Maintaining Your quipment 94 Pages opyright 2016 S ompanies ll rights reserved. ny copying or other use of the material in this catalog (text, illustrations, drawings, photos) without prior express written consent is prohibited. Information in this catalog is subject to change without prior notice. 3

4 Matrix hart H 1 Type T apacity Stroke Options Suffix ode 1 - Type 3 - apacity 4 - Stroke H Hydraulic 2 - Options L LN LN P P T U U U ULN S/ - Hollow Hole / - eneral Purpose / - Hollow Hole / - High Tonnage S/ - lat ody S/ - Load Return High Tonnage S/ - Low Profile S/ - Lock Nut S/ - Lock Nut Low Profile S/ - Pull Precision ouble cting S/ - Threaded S/ - luminum S/ - luminum Hollow Hole / - luminum Hollow Hole S/ - luminum Lock Nut 02 2, 2.5 Tons 04 4 Tons 05 5 Tons 09 9 Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons 5 - Suffix ode T US Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons 1,000 1,000 Tons 1,500 1,500 Tons V actory esignation US Made XT " 01 1" 02 2" 04 4" 05 5" 06 6" 08 8" 10 10" 12 12" 13 13" 14 14" 18 18" 20 20" 24 24" 32 32" No Internal Threads, H Series only lat ody Kit ccessories See the assortment of accessories designed to work with our products. pg34 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Heavy duty, heat treated, grooved saddle provides better surface traction during operation Rod wiper seals out dirt and contamination Steel stop ring for rod over travel protection Industrial hard chrome plated rod prevents scratching and corrosion ollar fixture threads One piece steel rod stopper for extra strength and prevents over travel s are burnish rolled smoother finish than honing, which reduces scoring and prolongs seal life Polyurethane cup seal provides optimum performance One piece high grade alloy bearing for side load protection and long life 4 Rectangular return spring design eliminates spring breakage and provides quicker retraction High flow ball coupler provides more flow than conventional couplers

5 Series Type Max apacity Range (tons) Max Stroke Range Page / Reference Image H Single cting s HU luminum Single cting s H ouble cting s HU H H luminum ouble cting s High Tonnage Single cting s High Tonnage ouble cting s s HL Low Profile s H lat ody s HLN Lock Nut s HULN HLN luminum Lock Nut s Low Profile Lock Nut s ccessories H Hollow Hole s H HU HU ouble cting Hollow Hole s luminum Hollow Hole s luminum ouble cting Hollow Hole s HP Pull s HT Threaded s HP Precision ouble cting s Pump Section Page 44 5

6 Single cting s H Series - eneral Purpose, Spring Return apacity: Tons* Stroke: Inches Max. Operating Pressure: 10,000 psi Min. - Max. : Inches H10010 H1514 H7513 * Larger Tonnages or tonnages that exceed 100, please refer to our H Section pg 18 H1501 Single cting H1506 in the collapsed position with 15 cylinder base for safety. Single cting H5513 in the collapsed position ready to lift a load Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. ollar threads and base mounting holes for fixturing Hard chrome plated piston rod protects against corrosion and damage Polyurethane U-up seals provide a sure seal and long life Solid one piece alloy steel body One piece aluminum alloy bearing protects against cylinder wall damage H38 high flow coupler with dust cap is standard on most cylinders** HU Series luminum s luminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. pg

7 Quick Selection uide apacity (ton) Stroke ollapsed Oil apacity (in 3 ) Weight (lbs) H0203* H0500** H H H H H H H Series Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 s 2.01 H H H H H ccessories See the assortment of accessories designed to work with our products. pg H H H H H ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, Hose pg and Pump H H H H Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared H H H H High-low ouplers High-low oupler: H38 is included on all models (except where specified) H H H H H H H Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. Match up these saddles with the following cylinders: ST05 H05 s* ST10 H10 s H H H H H H H H H See pages 8-9 for detailed specifications. ST15 H15 s ST25 H25 s ST55 H55, H75, H100 s * xcept the H0500 cylinder pg 35 * H0203 load return. ** H0500 comes with RZ14 coupler. is equipped with carrying handle. 7

8 Single cting s H Series - Spring Return 3/8"-18NPT apacity (ton) Stroke ffective rea (in 2 ) Internal Pressure at apacity (psi) Oil apacity (in 3 ) Weight (lbs) H0203* , H0500** , H , H , H , H , H , H , H , H , H , H , Y 9.96 H , H , X H , H , ** H0500 Only H , H , H , H , H , H , H , Y 1.02 H , H , X K J H , H , H , H , H , H , L H , H , H H , H , H , H , /8"-18NPT H , H , H , H , Z H , * H0203 load return. ** H0203 comes with RZ14 coupler. is equipped with carrying handle.

9 ollapsed xtended ore Outside ia. Rod ia. Saddle ia. ase to Inlet Port ollar Thread H ollar Thread Length L Rod Internal Thread J Rod Thread Length K ase Mounting Hole olt ircle X Thread Y Thread epth Z H0203* ¼ H0500** x H ½ ¾ -16UN ¼ -20UN 0.55 H ½ ¾ -16UN ¼ -20UN 0.55 H ½ ¾ -16UN ¼ -20UN 0.55 H ½ ¾ -16UN ¼ -20UN 0.55 H ½ ¾ -16UN ¼ -20UN 0.55 H ¼ UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¼ UN UN 0.55 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ¾ UN ⅜ -16UN 0.51 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ ½ -13UN 0.75 H ½ H ½ -13UN 0.75 H ½ -13UN 0.75 H ½ -13UN 0.75 H ½ -13UN 0.75 H ½ -13UN 0.75 H ¾ H ¾ UN 0.85 H ¼ H ¼ ¾ -10UN 1.00 H ¼ ¾ -10UN 1.00 s * H0203 load return. ** H0500 comes with RZ14 coupler. is equipped with carrying handle. Length x Width 9

10 luminum Single cting s HU Series - eneral Purpose, Spring Return, Lightweight apacity: Tons Stroke: Inches Max. Operating Pressure: 10,000 psi HU5006 Min. - Max. : Inches HU7506 HU2006 HU7504 Lightweight aluminum alloy construction Up to 60% lighter than comparable tonnage steel cylinders onvenient carry handle on 50, 75 and 100 ton models Hard anodized aluminum rod provides extra protection against corrosion and wear Integral steel protective plate Maximum working pressure: 10,000 psi / 700 bar luminum vs. Steel s luminum cylinders provide a great alternative to the traditional steel cylinder in many applications. eing up to 60% lighter in weight, luminum cylinders are highly portable and reduce user fatigue and strain. However, due to the finite properties of luminum vs. Steel, these cylinders should NOT be used in high cycle applications. The V luminum cylinders are designed for a maximum safety rating of 5,000 cycles. Under normal lifting applications this should provide a long service life. HU5006T H5506 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. High-low ouplers High-low oupler: H38 is included on all models (except where specified). luminum s 60% lighter in weight than steel Highly portable and reduces user fatigue Not used for high cycle applications Under normal conditions, the maximum rated safety cycle life is 5,000 cycles ase of the cylinder contains a steel plate* Steel s Much heavier than aluminum cylinders Low portability with heavier cylinders which creates user fatigue and strain Will out-perform aluminum cylinders in higher cycle applications an exceed aluminum cylinders maximum safety cycle life of 5,000 cycles. *The base of the cylinders contain a steel plate with mounting holes that are designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach larger base mounting plates for lifting stability. They are NOT designed to withstand the full ratings of the cylinders

11 HU Series Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 s 3/8-18NPT Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduation s and types to suit any need. pg 69 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 apacity (tons) Stroke ffective rea (in²) Internal Pressure at apacity (psi) Oil apacity (in³) ollapsed xtended ore ia. Outside ia. Rod ia. Saddle ia. ase to Inlet Port Weight (lbs) 1.97 HU2002T , HU2004T , HU2006T , HU3002T , HU3004T , HU3006T , HU5002T , HU5004T , HU5006T , HU5008T , HU5010T , HU , HU , HU , HU , HU , HU , HU HU HU HU

12 ouble cting s H Series - eneral Purpose apacity: Tons Stroke: Inches Pressure: 10,000 psi Min. - Max. : Inches H20013 H3008 Rod wiper seals out dirt and contamination High strength steel construction from gun drilled solid bar High flow 3/8 NPT female couplers One piece high grade alloy bearing for side load protection and long life Ideal for pushing and pulling Maximum working pressure: 10,000 psi / 700 bar Threaded cylinders, removable saddle, thicker cylinder walls Retract under hydraulic power for faster operation Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. levis and Tangs Install a clevis or a tang to your double acting cylinder for a pulling application. pg34 H cylinders can be used in pushing and pulling applications. In this photo, we see a H2506 H cylinder set up for a pull application using a Rod levis cylinder accessory

13 H Series Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 s ccessories See the assortment of accessories designed to work with our products. pg34 H20024 apacity (tons) 10 Stroke ollapsed Oil apacity Push (in 3 ) Pull (in 3 ) Weight (lbs) H H H H2506 With a variety of tonnage and sizes, you can apply our cylinders to a large variety of applications. ustom tonnages and stroke lengths are available upon request. Quick Selection uide 8.15 H H H H H H H H H H H H H H H H See pages (pg.14-15) for detailed specifications. ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, Hose pg and Pump. 64 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 High-low ouplers High-low oupler: H38 is included on all models (except where specified). HU Series luminum s luminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. pg16 13

14 ouble cting s H Series - eneral Purpose ccessories See the assortment of accessories designed to work with our products. pg34 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, Hose pg and Pump. 64 H20013 H7513 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 H10018 H3008 apacity (tons) Stroke Maximum apacity Push (ton) Pull (ton) ffective rea Push (in 2 ) Pull (in 2 ) Oil apacity Push (in 3 ) Pull (in 3 ) Weight (lbs) ollapsed xtended ore ia H H H H H H5506* H5513* H5520* H7506* H7513* H10006* H10010* H10013* H10018* H H H H H

15 H Series Y X Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s H 3/8"-18NPT Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. K J M L Z High-low ouplers High-low oupler: H38 is included on all models (except where specified). Outside ia. Rod ia. Saddle ia. ase to dv. Port Top to Return Port H Rod Internal Thread J Rod Thread Length K ollar Thread L ollar Thread Length M olt ircle X ase Mounting Hole Thread Y H ¼ H ¼ H ½ H ½ ½ H ½ ½ H5506* ½ H5513* ½ H5520* ½ H7506* ¾ ¾ H7513* ¾ ¾ H10006* ¾ ⅞ ¾ H10010* ¾ ⅞ ¾ H10013* ¾ ⅞ ¾ H10018* ¾ ⅞ ¾ H H ½ ¾ H ½ ¾ H ½ ¼ ¼ H ¼ ¾ Thread epth Z * ton cylinders are equipped with carrying handles. 15

16 luminum ouble cting s HU Series - eneral Purpose, Lightweight HU15006 HU7513 apacity: Tons Stroke: 2-13 Inches Max. Operating Pressure: 10,000 psi Min. - Max. : Inches luminum vs. Steel s luminum cylinders provide a great alternative to the traditional steel cylinder in multiple applications. eing up to 60% lighter in weight, luminum cylinders are highly portable and reduce user fatigue and strain. However, due to the finite properties of luminum vs. Steel, these cylinders should NOT be used in high cycle applications. The V luminum cylinders are designed for a maximum safety rating of 5,000 cycles. Under normal lifting applications this should provide a long service life. HU7513 luminum s 60% lighter in weight than steel Highly portable and reduces user fatigue Not used for high cycle applications Under normal conditions, the maximum rated safety cycle life is 5,000 cycles ase of the cylinder contains a steel plate* Steel s H7513 Much heavier than aluminum cylinders Low portability with heavier cylinders which creates user fatigue and strain Will out-perform aluminum cylinders in higher cycle applications an exceed aluminums maximum safety cycle life of 5,000 cycles. apacity (tons) Stroke Maximum apacity (ton) ffective rea (in 2 ) Oil apacity (in 3 ) Push Pull Push Pull Push Pull 6.00 HU HU HU HU HU HU HU HU HU HU HU HU HU Weight (lbs) HU * The base of the cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach a larger base mounting plate for lifting stability. They are NOT designed to withstand the full rating of the cylinder.

17 H Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. HU Series Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 s Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Lightweight aluminum alloy construction Up to 60% lighter than comparable tonnage steel cylinders onvenient carry handle on 50, 75, 100 and 150 ton models Hard anodized aluminum rod provides extra protection against corrosion and wear Steel protective plate on cylinder base Maximum working pressure: 10,000 psi / 700 bar Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. High-low ouplers High-low oupler: H38 is included on all models (except where specified). ollapsed xtended ore ia. Outside iameter Rod ia. Saddle iameter ase To dvance Port Top To Retract Port H HU HU HU HU HU HU HU HU HU HU HU HU HU HU NOT: The base of the aluminum cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach larger base mounting plates for lifting stability. The threads are NOT designed to withstand the full rating of the cylinder. 17

18 High Tonnage Single cting s H series - Heavy Lifting, Load Return apacity: 100-1,500 Tons Stroke: Inches Max. Operating Pressure: 10,000 psi Min. - Max. : Inches H10004 H15006 H20002 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. ontrol the speed of your cylinder by adding a flow control valve. pg 72 low ontrol Valves pg 66 s are burnish rolled creating a smoother surface than honing. Rod wiper seals out dirt and contamination ase mounting holes on all models High strength steel construction from gun drilled solid bar providing extra combine strength for high tonnage applications High flow 3/8 NPT coupler Polyurethane cup seal provides optimum performance Industrial hard chrome plated rod helps prevent rust and corrosion Maximum working pressure: 10,000 psi / 700 bar ustom sizes are available upon request Load Return as/iesel ngine Pumps lectric Motor Pumps These H cylinders pair up well with a as or iesel ngine pumps. We offer a variety of different flow rates, motor sizes and reservoir sizes. ontact your local V dealer for more details. These H cylinders pair up well with lectric Motor pumps. We offer a variety of different flow rates and motor sizes. ontact your local V dealer for more details. P70M3N05 Will provide 10,000 psi. hydraulic force at remote locations Industrial grade 5.5 or 10.2 hp Honda gas engine or 7.3 hp HTZ diesel engine. Ideal for applications where electricity isn t easily accessible. Two speed pump designed for rapid cylinder advance as pump features a sturdy protective roll cage for use in the toughest environments lectric start standard on P80 and optional on P90 P50W3N03 Meets OSH regulations for sound (80d) Two speed pump designed for rapid cylinder advance Internal filter screens contamination to prevent pump damage ll units are wired as 120 V 60 Hz; Optional wiring includes 50 Hz motors and 240V 60Hz 100% uty ycle T motors ll hand pendants are wired at 24V for safety ull load starting capability

19 Quick Reference uide apacity (tons) 100 Stroke ollapsed Oil apacity (in 3 ) Weight (lbs) 1.97 H H H H H H H H H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 s H H H H H Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared H H H H High-low ouplers High-low oupler: H38 is included on all models (except where specified) H H H H H H Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders. pg H H H H H H H H H H H H or these higher tonnages, contact your local V dealer for pricing and details See next pages (pg.20-21) to view more detail stats on High Tonnage Single cting s. 19

20 High Tonnage Single cting s H Series - Heavy Lifting, Load Return 3/8"-18NPT H100 H150 H200 X Y Z apacity (tons) Stroke Maximum apacity (ton) ffective rea (in 2 ) Oil apacity (in 3 ) Weight (lbs) 1.97 H Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared H H H H H High-low ouplers High-low oupler: H38 is included on all models (except where specified) H H H H H H Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg H H H H H H H Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders. pg H H H H H H H H H H H H H H H H

21 H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s H300 - H1000 ollapsed xtended ore ia. Outside ia. Rod ia. Saddle ia. ase To dv. Port olt ircle X ase Mounting Holes Thread Size (mm) Thread epth Z H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M

22 High Tonnage ouble cting s H Series - Heavy Lifting H20008 apacity: 100-1,500 Tons Stroke: Inches H10002 H30006 H10008 H15006 Max. Operating Pressure: 10,000 psi Min. - Max. : Inches Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. ontrol the speed of your cylinder by adding a flow control valve. pg 72 low ontrol Valves pg 66 s are burnish rolled creating a smoother finish than honing Industrial hard chrome plated rod prevents scratching and corrosion ase mounting holes standard on all models Rod wiper seals out dirt and contamination High strength steel construction from gun drilled solid bar High flow 3/8 NPT couplers Maximum working pressure: 10,000 psi / 700 bar ustom sizes are available upon request P70M4N05 as/iesel ngine Pumps These H cylinders pair up well with a as or iesel ngine pumps. We offer a variety of different flow rates, motor sizes and reservoir sizes on our gas/diesel engine pumps. ontact your local V dealer for more details. as engine pump will provide 10,000 psi. hydraulic force at remote locations Industrial grade 5.5 or 10.2 hp Honda gas engine or 7.3 hp HTZ diesel engine. Ideal for applications where electricity isn t easily accessible. Two speed pump designed for rapid cylinder advance as pump features a sturdy protective roll cage for use in the toughest environments Optional electric start lectric Motor Pumps These H cylinders pair up well with lectric Motor pumps. We offer a variety of different flow rates and motor sizes on our electric motor pumps. ontact your local V dealer for more details. P50W4N03 Meets OSH regulations for sound (80d) Two speed pump designed for rapid cylinder advance Internal filter screens contamination to prevent pump damage ll units are wired as 120 V 60 Hz; Optional wiring includes 50 Hz motors and 240V 60Hz 100% uty ycle T motors ll hand pendants are wired at 24V for safety ull load starting capability

23 Quick Reference uide apacity (tons) 100 Stroke ollapsed Oil apacity (in 3 ) Weight (lbs) 1.97 H H H H H H H H H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 s H H H H High-low ouplers High-low oupler: H38 is included on all models (except where specified) H H H H H Safety heck: VP3-K Pilot operated check valve kit. Used to hold the load in the event of a pressure loss in the system H H H H H H H Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder H H Optional Tilt-Saddles H H H Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders. pg H H H H H H or these higher tonnages, contact your local V dealer for pricing and details See next pages (pg.20-21) to view more detail stats on High Tonnage Single cting s. 23

24 High Tonnage ouble cting s H Series - Heavy Lifting H 3/8"-18NPT X Y Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. Z Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Related Product: VP3-K Pilot operated check valve kit. Used to hold the load in the event of a pressure loss in the system. High-low ouplers High-low oupler: H38 is included on all models (except where specified). Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders. pg 35 apacity (tons) H100 Stroke H150 Maximum apacity (ton) ffective rea (in 2 ) H200 Oil apacity (in 3 ) Push Pull Push Pull Push Pull Weight (lbs) 1.97 H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H

25 H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s H300 - H1000 ollapsed xtended ore ia. Outside ia. Rod ia. Saddle ia. ase To dv. Port Top To Retract Port H olt ircle X ase Mounting Holes Thread Size (mm) Thread epth Z H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M H M

26 Low Profile s HL Series - Low learance Lifting ompact design for use in confined spaces Rod wiper helps seal out dirt and contamination Specially designed return spring provides quick retraction and extends the life of the spring Hard chrome plated rod helps prevent scratching and corrosion Rod end is grooved to reduce load slippage Includes high flow coupler and dust cap HL1001, HL2002, and HL3002 coupler is tilted 5 for added clearance HL Series Y Z X /8"-18NPT HL6003KK ONLY* 3/8"-16 UN Low profile cylinders are great for confined spaces. apacity (tons) Stroke ollapsed ffective rea (in 2 ) xtended Internal Pressure at apacity (psi) ore iameter Oil apacity (in 3 ) Weight (lbs) HL , HL , HL , HL , HL6003KK* , HL , Outside iameter Rod iameter olt ircle X Rod Mounting Thread Y (mm) Thread epth Z HL M HL M HL M HL M HL6003KK* HL M * HL6003KK is equipped with 4x 3/8-16UM mounting holes

27 Low Profile s ombo Kit Low learance Lifting J72101 HL Series ompact design for use in confined spaces Ideal for pushing applications Rod wiper helps seal out dirt and contamination Return spring ensures a quick retraction and extends the life of the spring Industrial hard chrome plated rod helps prevent scratching and corrosion Includes stackable 1, 2, and 3 aluminum adapters that conveniently snap into the base of the rod Includes high flow H38 coupler and dust cap onvenient storage case s Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 3" dapter J72101 High-low ouplers High-low oupler: H38 is included on all models (except where specified). 1" dapter 2" dapter 1.5" Saddle apacity (ton) Stroke ffective rea (in 2 ) ollapsed xtended w/o adapter Internal Pressure at apacity (psi) Housing iameter Rod iameter Weight (lbs) 10 J , olt-on Tilt Saddles STL50 STL100 STL10 olt-on tilt saddles are designed specifically for use with the HL Series Low Profile s and Low Profile Kit. These saddles provide a max. 5 tilt for uneven loads. escription STL J72101, HL1001 Kit STL HL5002 STL HL

28 lat ody s xtremely Low Lifting xtremely low collapsed height for applications with minimal clearance at the lift point Maximum working pressure 10,000 psi / 700 bar H0503 and H0503 come with a 3/8 regular flow coupler H15006 Y H0503 H Series H X 3/8-18NPT L 1 M H5006 in the collapsed position ready to lift a load with a P1500 foot pump. apacity (tons) Stroke ollapsed ffective rea (in 2 ) xtended Internal Pressure at apacity (psi) ore ia. Oil apacity (in 3 ) Outside ia. 1 x 2 Weight (lbs) H0503* , H , H , H , H , H , H , H , Rod ia. ase to Port Rod to ase L Rod to Mtg. Hole M Hole Pitch X Hole ia. Y ounter ore ia. H0503* x H x H x H x H x H x H x H x ounter ore epth *H0503 comes equipped with the R38 coupler instead of H38

29 lat ody Kits H Series - Kits Various height stackable magnetic adapters eliminate dangerous cribbing onvenient carrying case Magnetic adapters are stackable U.S. Patent No.7,237,762 2 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s Magnet Shim H Series High-low ouplers High-low oupler: H38 is included on all models (except where specified) Magnet Shim apacity (tons) Stroke Oil apacity (in 3 ) ollapsed Weight (lbs) dapter imensions H0503** H H1005 H H2005 H H3005 H H5006 H **H0503 comes equipped with the coupler R38 29

30 Lock Nut s HLN Series - Heavy Lifting w/ Mechanical Lock Nut HLN15006 apacity: Tons Stroke: Inches Max. Operating Pressure: 10,000 psi HLN5504 Min. - Max. : Inches Single acting cylinder with mechanical safety lock nut esigned to support loads without hydraulic pressure Overflow port prevents cylinders from over travel Load return Solid steel cylinder body lectroless nickel plated rod to resist corrosion and rust Maximum working pressure: 10,000 psi / 700 bar ST55 ST200 HLN10012 Optional Tilt Saddles HLN55, HLN100 s HLN150, HLN200 s Saddles tilt to a 5 max to adjust to the load. pg 35 (42) HLN5508 lock nut cylinders lifting the Jordan ridge in hesapeake, V. HLN10002 apacity (tons) Stroke ffective rea (in 2 ) Oil apacity (in 3 ) Weight (lbs) 1.97 HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN

31 H 3/8"-18NPT I 1 HLN Series Safety olor and V Lock nut cylinders are equipped with a yellow safety band. o not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load. s 2 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. ollapsed xtended ore iameter Outside iameter Saddle iameter epth of Rod Hole 1 Saddle Protrusion rom Rod 2 Lock Nut Length H ase to Inlet Port I HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN HLN

32 Lock Nut luminum s HULN Series - Heavy Lifting w/ Mechanical Lock Nut Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our product. 2 1 H HULN Series 3/8"-18NPT I Single acting cylinder with mechanical safety lock nut esigned to support loads without hydraulic pressure Overflow port prevents cylinders from over travel Load return Lightweight aluminum cylinder body Steel saddle Hard anodized rod to resist corrosion and rust Maximum working pressure: 10,000 psi / 700 bar apacity (tons) Stroke ffective rea (in 2 ) Oil apacity (in 3 ) Weight (lbs) ollapsed xtended ore ia. O.. Saddle ia. Saddle Protrusion from Rod Lock Nut Length H 2.00 HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN HULN ase To dv Port I

33 Low Profile Lock Nut s Low learance Lifting w/ Mechanical Lock Nut Single acting cylinder with mechanical safety lock nut esigned to support loads without hydraulic pressure Low profile for confined spaces 5 tilting saddle is standard Maximum working pressure: 10,000 psi/700 bar quipped with H38 high flow coupler Load Return Safety Instructions Visit our O S and ON TS section to review the best methods of operation. lways be prepared. pg 92 s HLN Series Safety olor and V Lock nut cylinders are equipped with a yellow safety band. o not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load. H 5 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 I apacity (tons) Stroke ffective rea (in 2 ) Oil apacity (in 3 ) Weight (lbs) HLN HLN HLN HLN HLN K J ollapsed xtended ore ia. Outside ia. Rod Outside Thread Saddle ia. Saddle Protrusion rom Rod Lock Nut Length H ase to Inlet Port I oupler to ylet J yelet to yelet K HLN TW105-4N HLN TW135-4N HLN TW170-4N HLN TW190-4N HLN TW215-4N

34 Lifting Handles esigned for ease of carrying cylinders Provides better control for positioning cylinder asy installation LH25T34 LH30T40 LH30T45 LH55T49 or s H2504 through H2514 H3008, H3008, H3014, H2002T, H2006T H3002T, H3006T, H3007, H3010 HLN5504 through HL5512 LH25T34 levis and Tangs Rod ase P Series Series H cylinders can be used in pushing and pulling applications. In this photo, we see a H2506 H cylinder set up for a pull application using a rod clevis cylinder accessory H H Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. pplication Series imensions H H05* P05 ¾ -16N Rod ase H10**, H15, H10 P15 1-8UN H25 P25 1½ -16UN H05* H H H *xcept H0500 **xcept H1001

35 ases or use with Series imensions H05* H10** Saddles rooved, Tilt, and Threaded H H Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 ccessories S Series ST Series ST Series HT Saddle Type Tilt rooved apacity (ton) or (s) imensions ST05 5 H05* ST10 10 H10** ST15 15 H ST25 25 H ST H55, H55, H75, H75, H100, HLN55 and HLN ST H100 and H ST H150 and H ST H200 and H ST HLN150 and HLN S05 5 H05* S10 10 H10** S15 15 H S25 25 H Threaded HT10 10 HT1006 and HT1010 H1002-H1014, H1010-H /4"- 11.5NPT "- 8UN 1.77 *xcept H0500 **xcept H

36 Hollow Hole s H Series apacity: Tons Stroke: Inches Max. Operating Pressure: 10,000 psi H1201T H6006T Here is a H6006T in a pulling application. Min. - Max. : Inches H3002T Ideal for pulling and pushing applications Heavy duty compression spring ual wipers help prevent contamination ollar thread protector High flow coupler with dust cap XT cylinders do not come with internal rod threads 60 and 100 Ton models are equipped with carrying handles apacity (tons) Stroke ffective rea (in 2 ) Internal Pressure at apacity (psi) Oil apacity (in 3 ) Weight (lbs) ollapsed xtended ore ia. O H1201T* , H1202T* , H1202XT* , H1203XT , H2002T , H2006T , H3002T , H3006T , H6003T** , H6006T** , H10003T** , * comes with a RZ14 regular flow coupler ** is equipped with carrying handles

37 J K L H H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s Related Product: auges 3/8-18NPT Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Z Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Y ombo Kits Most cylinders are available in easy to order kits: cylinder, gauge, couplers, hose pg and pump. 64 X High-low ouplers High-low oupler: H38 is included on all models (except where specified). I.. O.. Rod Internal Thread J Internal Thread Length K ollar Thread iameter H Length L ase to Inlet Port olt ircle X ase Mounting Hole Thread Y H1201T* ¾ -16UN ¾ /16-18UN 0.35 H1202T* ¾ -16UN ¾ /16-18UN 0.35 H1202XT* ¾ /16-18UN 0.35 H1203XT ¾ /16-18UN 0.35 H2002T /16-16UN ⅞ ⅜ -16UN 0.37 H2006T /16-16UN ⅞ ⅜ -16UN 0.37 H3002T /16-16UN ½ ⅜ -16UN 0.55 H3006T /16-16UN ½ ⅜ -16UN 0.55 H6003T** ¾ -16UN ¼ ½ -13UN 0.55 H6006T** ¾ -16UN ¼ ½ -13UN 0.55 H10003T** UN ⅜ ⅝ -11UN 0.75 Thread epth Z * comes with a RZ14 regular flow coupler ** is equipped with carrying handles 37

38 ouble cting Hollow Hole s H Series H3010 H6006 apacity: Tons Stroke: Inches Max. Operating Pressure: 10,000 psi Min. - Max. : Inches H10001 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Ideal for pushing and pulling applications. ual wipers help prevent contamination H38-3/8 high flow female coupler Hard chrome rod prevents rust and corrosion Hardened steel seat Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, Hose pg and Pump. 64 apacity Push (ton) Pull (ton) Stroke Oil apacity Push (in 3 ) Pull (in 3 ) ollapsed xtended enter Hole I.. Rod O.. Max Pressure (psi) Weight (lbs) 7.00 H H H H H H H H H H

39 X Y H Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. L K 3/8"-18NPT High-low ouplers High-low oupler: H38 is included on all models (except where specified). J H Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 I Z Min. Max. ia. of enter Tube O.. I.. O.. ase to Inlet Port Top to Return Port L Internal Thread H Internal Thread Length I ollar Thread ia. J Length K ase Mounting Hole olt ircle X Thread Y H "-16UN ½" ⅜"-16UN 0.55 H "-16UN ½" ⅜"-16UN 0.55 H ¾"-16UN ¼" ½" 13UN 0.55 H ¾"-16UN ¼" ½" 13UN 0.55 H ¾"-16UN ¼" ½" 13UN 0.55 H "- 16UN ⅝" 11UN 0.75 H "- 16UN ⅜" ⅝" 11UN 0.75 H "- 16UN ⅜" ⅝" 11UN 0.75 H "- 16UN ⅜" ⅝" 11UN 0.75 H Thread epth Z 39

40 Hollow Hole luminum s HU Series - Lightweight, Spring Return Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 HU Series apacity (tons) Stroke ouble cting luminum Hollow Hole s HU Series - Lightweight ffective rea (in 2 ) Oil apacity (in 3 ) Weight (lbs) ollapsed xtended enter Hole iameter Outside iameter ase To dvance Port 3.00 HU H 6.00 HU H 3.00 HU H 6.00 HU H Handle or yelets Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. HU Series Maximum Oil ase Top To ollapsed xtended Outside Handles Stroke ffective rea apacity Weight ore To dv. Retract apacity ia. or apacity (ton) (in 2 ) (in 3 ) (lbs) ia. Port Port (tons) yelets Push Pull Push Pull Push Pull 6.00 HU H HU H 6.00 HU H HU H 6.00 HU HU HU HU

41 Pull s HP Series - High-Tonnage Pulling High strength steel construction One piece high grade alloy bearing for side load protection and longer life Polyurethane cup seal provides optimum performance xternal rod threads and Internal base threads Used for pulling and tensioning Maximum working pressure: 10,000 psi / 700 bar Spring extend return s HP Series Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg /8"-18NPT P10 M30X2 M30X2 The P10* comes was a male/female set. This clevis is designed to aid in pulling applications with all the HP series cylinders. Z 3/8-18NPT M30x2 H L P 1.18 * P10 only works with HP1006 apacity (tons) Stroke ffective rea (in 2 ) Internal Pressure t apacity (psi) Oil apacity (in 3 ) ollapsed xtended Outside ia. ore ia. Top to Inlet Port Thread H HP , ½ -16UN HP , ¼ -14UN HP1006* , M85x ollar Thread Length L Thread dapter Rod ase Mounting Hole Length P ia. Thread Length K Thread Q (mm) Thread Y HP0205 ¾ -14NPT M16 x 1.5 ¾ -14NPT HP0505 1¼ -11.5NPT M28 x 1.5 1¼ -11.5NPT HP1006* M30 x 2 M30x epth Z Weight (lbs) * P10 only works with HP

42 Threaded s HT Series Ideal for frame pulling machines Threaded rod and base Single acting cylinders with spring return Removable threaded Rod adapter used to attach accessories to rod end and base Maximum working pressure: 10,000 psi / 700 bar Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. HT Series Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 ombo Kits Most cylinders are available in easy to order kits: cylinder, gauge, couplers, hose pg and pump. 64 3/8" - 18NPT L V High-low ouplers High-low oupler: H38 is included on all models (except where specified). T K S apacity (tons) Stroke ffective rea (in 2 ) Internal Pressure at apacity (psi) Oil apacity (in 3 ) ollapsed xtended HT0405* , HT , HT , HT , Weight (lbs) Outside ia. Rod ia. ase to Inlet Port ollar K ollar Thread Length L Saddle S ase Threads T Rod Threads V HT0405* UN ¾ - 14 NPSM NPT HT UN NPSM NPSM HT UN NPSM NPSM HT UN NPT NPSM * comes with a coupler: RZ14 instead of H38

43 Precision ouble cting s HP Series - High-ycle ixtured pplication H M L I Q P s N HP Series K 3/8"-18NPT J *Note: Precision double acting cylinders do not come with couplers. Provides hydraulic power on both extend and retract esigned for high cycle production applications High strength steel construction from gun drilled solid bar Rod wiper seals keep dirt and contamination out levis eye attachments are available Maximum working pressure: 10,000 psi / 700 bar Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 apacity (tons) 9 16 Push ffective rea (in 2 ) Pull ffective rea (in 2 ) ollapsed xtended ore ia. Outside ia. HP HP HP HP ia. Protrusion Rod Thread Thread Length H ase to dv. Port J Top to Return Port K Length L Thread M ollar Thread Length N Int. ase Thread P Int. ase Thread Length Q HP ¾ / HP ¾ / HP ⅛ ⅝ / HP ⅛ ⅝ / Weight (lbs) Series y attaching this clevis eye to a HP cylinder, you gain the ability to pull applications. or use with the 9 or 16 ton HP cylinders only. imensions /16-16N ¾ -16N /16-16N ⅛ 12N 43

44 Hand Pump Matching hart Hand Pumps Match up the stroke length to the capacity of your cylinder to find the selected hand pump to go with your cylinder Stroke apacity (tons) < Suggested* Hand Pump s P350 P601S P1000 P1201S P1201 P2001 P2301 P2301M P4301 P8701 P8701M *The suggested pump model is based on oil capacity requirements of the cylinder. Matching hart ir, lectric, and as ngine Pumps Match up the stroke length and capacity of the cylinder to find the suggested pump to work with your application Stroke apacity (tons) < Suggested ir/lectric/as Pump s P600 P1500 P1500L P1500M P2000 P3801 P3801M P30M3N01 P40M3N02 P50M3N03 P70M3N

45 Power Source Pump Type Single Speed Metal Hand Pumps (P-Series) Two Speed Metal Hand Pumps (P-Series) Page / Reference Image Manual Two Speed luminum Hand Pumps (P-Series) ouble cting Hand Pumps (P-Series) Low Pressure Hand Pump (P-Series) Two Speed luminum Multi irection Hand Pump (P-Series) oot Pump (P57-Series) 48 Pumps Rotary ir Pumps (PR-Series) 49 Portable ir Pump (P-Series) ir Metal ir Pumps (P-Series) ouble cting ir Pump (P-Series) Remote ontrol ir Pump (P-Series) Single Phase lectric Pumps lectric P HP lectric Pumps P HP lectric Pumps P HP lectric Pumps 3 Phase lectric Pumps P HP 3 Phase lectric Pumps P HP 3 Phase lectric Pumps Universal Motor Pumps (PU-Series) 63 P HP as ngine Pump as P HP as ngine Pump P HP HTZ iesel ngine Pump ontrol Valves and ccessories Page 66 45

46 Hand Pumps luminum and Steel P Series ombo Kits Most hand pumps are available in easy to order kits; Pump, auge, ouplers, Hose and pg 64 P1201S P601S P240L P350 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 P4301 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. lways be prepared. pg 92 P8701M P2301 P1201 P2301M P1000 Product Information Metal reservoirs resist cracking Internal pressure relief valve for overload protection ood for use with cylinders and hydraulic tools or OM applications Two-Speed pumps reduce user fatigue and increase productivity P1000 can be not only be used in the standard horizontal position, but can also be used with the outlet port facing upwards or downwards positions providing more flexibility in operation P1000RP comes with a 7/16-20 return-to-tank port for applications where this is required Usable Oil apacity (in 3 ) Single Speed - Single cting Oil Outlet Port Pressure Rating/Oil isplacement per Stroke 1 st Stage (psi/in 3 ) 2 nd Stage (psi/in 3 ) Piston Stroke Handle Operating orce (lbs) Reservoir onstruction P240L 15 ¼"-18 NPT n/a 7,200 / Steel P601S 37 ⅜"-18 NPT n/a 10,000 / Steel P1201S 67 ⅜"-18 NPT n/a 10,000 / Steel 2-Speed - Single cting P ¼"-18 NPT 200 / ,000 / luminum P ⅜"-18 NPT 200 / ,000 / luminum P1000* ⅜"-18 NPT 200 / ,000 / luminum P1000RP** 61 ⅜"-18 NPT 200 / ,000 / luminum P ⅜"-18 NPT 200 / ,000 / Steel P ⅜"-18 NPT 200 / ,000 / Steel P ⅜"-18 NPT 200 / ,000 / Steel P ⅜"-18 NPT 200 / ,000 / Steel P ⅜"-18 NPT 290 / ,000 / Steel 2-Speed - ouble cting P2301M 134 ⅜"-18 NPT 200 / ,000 / Steel P8701M 476 ⅜"-18 NPT 290 / ,000 / Steel * Oil capacity varies by position. Pump can be mounted outlet up or down ** Unit is equipped with a 7/16-20 Tank Return Port

47 2 ¼"- 18NPT H J Ø ⅜"-18NPT H J ⅜ -18NPT (P1201S) (P1201) (P1201S) (P1201) K H J ¼"-18NPT K H K 0.4 J H ⅜"-18NPT Ø.4 K (P1000 &P1000) (P1000RP) J ⅜ -18NPT H 0.47 K.4 J Pumps H K J H J ⅜ -18NPT imensions H J K Weight w/oil (lbs) Single Speed - Single cting P240L P601S P1201S Speed - Single cting P P P1000* P1000RP** P P P P P Speed - ouble cting P2301M P8701M * Oil capacity varies by position. Pump can be mounted outlet up or down and does not need to be horizontal ** Unit is equipped with a 7/16-20 Tank Return Port 47

48 5.4 oot Pump P57 Series - 10,000 PSI P570P Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: rac/oil Industry Our valve seat puller is designed for removal of valve seats. Use the following model number for ordering purposes: HVSP pg 3/8-18NPT SP This combination kit will work well with this product. See our combo section for more details H Kits onsider using our portable H kits in conjunction with this pump. pg 29 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. lways be prepared. pg 92 High-low ouplers High-low oupler: H38 is included on all models (except where specified) Related Product: Nut Splitters The HNS nut splitters pair up with this portable foot pump. Our hydraulic nut splitters come in a spacious tool box so its easy to carry around with you from site-to-site. This tool box is large enough to hold small cylinders, saddles, spacers or whatever tool you need to bring with you to your next job site. Nut Size apacity T Stud imension HNS HNS /16-7/8 HNS pg 83 Usable Oil (In 3 ) Pressure Rating (psi) 1st Stage 2nd Stage Oil isplacement per Stroke (In 3 ) "1st Stage" 2nd Stage Max. Handle ffort (lbs) Piston Stroke P570P , Weight (Lbs)

49 Rotary ir Pumps PR Series - 10,000 PSI Rated PR1701 PRM4003 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types of gauges to suit any need. pg 69 PR1701 3/8"-18NPT(x2) PR1703 PR Series PR1703 and PR4003 3/8"-18NPT (x2) Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 Pumps 1/2 - NPT ir Inlet 1/2 - NPT ir Inlet Used with Single cting ouble cting Motor Size (hp) Usable Oil apacity (gal) Pressure Rating (psi) Pressure Rating 1 st Stage (psi) 2 nd Stage (psi) Oil Output low Rate 1 st Stage (in³/min) 2 nd Stage (in³/min) Valve Type Valve unction ir Pressure Range (psi) PR , , ump dvance/return 60 ~ PR , , ump dvance/return 60 ~ PR , , Manual PW3 dvance/hold/return 60 ~ PR , , ump dvance/return 60 ~ PR , , ump dvance/return 60 ~ PR , , Manual PW3 dvance/hold/return 60 ~ PRM , , Manual PW4 dvance/hold/return 60 ~ PRM , , Manual PW4 dvance/hold/return 60 ~ 100 ir onsumption (cfm) Max Sound Level (d) imensions PR PR PR PR PR PR PRM PRM Weight (lbs) 49

50 ir Pumps ir ctuated Power P Series 70 low 100 psi air pressure Oil low (in 3 /min ) P1500L P1500 P600H P ,000 4,000 6,000 8,000 10,000 Pressure Pressure (psi) (psi) P1500 P2000 (Turbo) ir onsumption= 7.8cfm Product Information P2000 P3801 P7550 Metal reservoirs resist cracking US Patent No. 5,946,912, a built in bypass device protects the hydraulic system from over pumping damage compact yet powerful ir Turbo Motor US Patent No. 5,341,723 Suggested air inlet range: psi / bar Maximum working pressure: 10,000 psi / 700 ar P1500 Pressure djustment P1500 Pressure can be adjusted externally from 1,000 to 10,000 psi. P7550M P3801M P1500M Usable Oil apacity Oil Outlet Port Output low Rate No Load (in 3 /min) Load (in 3 /min) Input ir Pressure Required (psi) ir onsumption (cfm) Reservoir onstruction Single cting P ⅜"-18 NPT Steel P600H 36.6 ⅜"-18 NPT Steel P ⅜"-18 NPT luminum P1500* 91.5 ⅜"-18 NPT luminum P1500L** 91.5 ⅜"-18 NPT luminum P ⅜"-18 NPT luminum P ⅜"-18 NPT Steel P3801L** ⅜"-18 NPT Steel P ⅜"-18 NPT Steel ouble cting P1500M 91.5 ⅜"-18 NPT luminum P3801M ⅜"-18 NPT Steel P7550M ⅜"-18 NPT Steel * This unit is equipped with an external pressure adjustment (1,000-10,000psi) **These pumps are equipped with a hand held air powered pendant

51 P600 ¼"-18NPT P Series 0.31" ¼"-18NPT ⅜"-18NPT P1500L ⅜"-18NPT P " 9.66" 9.53" 9.05" 0.23" Ø0.20" 1.00" 1/4-20 UN " 0.30" 0.23" P1500M 0.35" 0.61" 0.61" 0.31" 4.82" 4.12" RL-145 Use in compressed air lines upstream of all P series air/hydraulic pumps to provide clean filtered (5um), lubricated air source to ensure long air motor life. ssembly is equipped with a metal bowl with sight glass and a PSI pressure gauge. 145 PSI maximum working pressure. 3/8 NPT Ports. Use lass-1 Turbine Oil (ISO V32) Use in compressed air lines upstream of V RL-145 and all P series air/hydraulic pumps to remove 99% of free water from the air line to ensure long air motor life. 145 PSI maximum working pressure. 3/8 NPT Ports. Pumps 1/4"-18NPT 3/8"-18NPT 1/4"-18NPT 3/8"-18NPT Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 1/4-18NPT 3/8-18NPT P3801 and P M6x15L ir Pump ombo Most air pumps are available in easy to order kits: pump, gauge, coupler, hose and cylinder pg 64 ase Mounting Holes imensions Weight w/ Oil (lbs) Single cting P600 yes P600H yes P1500 yes P1500* yes P1500L** yes P2000 yes P3801 no P3801L** no P7550 no ouble cting P1500M yes P3801M no P7550M no * Unit is equipped with an external pressure adjustment (1,000-10,000psi) **These pumps are equipped with a hand held air powered pendant 51

52 lectric Pumps P30, P40, P50 Series - Single Phase Meets OSH regulations for sound (80d) 2 Stage pumps provide fast run up before the high pressure stage Suction strainers screen out contamination to prevent pump damage ll units are wired as 120 V 60 Hz; Optional wiring includes 50 Hz motors and 240 V 60 Hz 100% uty ycle, NM 5 nclosure T motors ll hand pendants are wired 24 V for safety Starts under full load P50W4N03 Use with Type low Rate 1 st Stage 2 nd Stage in 3 /min psi in 3 /min psi Motor Size ump Manual Valve w/10 ft. Motor Pendant , Hp 2W/2P dvance/return , Hp , Hp ump Solenoid Valve w/10 ft. Pendant Manual Valve Manual Valve w/10 ft. Motor Pendant Solenoid Valve w/10 ft. Pendant & Locking Plate 2W/2P dvance /Return (uto*) 3W/2P dvance /Return** 3W/3P dvance /Hold Return 4W/3P dvance /Hold/Return 3W/3P dvance /Hold Return 4W/3P dvance /Hold/Return 3W/3P dvance /Hold Return 4W/3P dvance /Hold/Return , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp , Hp * dvance position holds pressure with motor running or off. Return retracts cylinder with motor off ** dvance position holds pressure with motor running and cylinder Returns when button is released.

53 lectric Pumps low hart 800 Oil low (in 3 /min ) P Series 0 0 2,000 4,000 6,000 8,000 10,000 P30 (0.5hp) P50 (1.5hp) Usable Oil apacity 1 al 2 al 3 al 5 al 10 al 15 al 25 al ump Manual Valve w/10 ft. Motor Pendant Pressure (psi) P40 (1hp) Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Pumps P30MP01 P30MP02 P30MP P40MP02 P40MP03 P40MP05 P40MP P50MP03 P50MP05 P50MP10 P50MP15 P50MP25 ump Solenoid Valve w/10 ft. Pendant P30H2S01 P30H2S02 P30H2S P40H2S02 P40H2S03 P40H2S05 P40H2S P50H2S03 P50H2S05 P50H2S10 P50H2S15 P50H2S25 P30SP01 P30SP02 P30SP P40SP02 P40SP03 P40SP05 P40SP P50SP03 P50SP05 P50SP10 P50SP15 P50SP25 Manual Valve P30M3N01 P30M3N02 P30M3N P40M3N02 P40M3N03 P40M3N05 P40M3N10 P40M3N15 P40M3N P50M3N03 P50M3N05 P50M3N10 P50M3N15 P50M3N25 P30M4N01 P30M4N02 P30M4N P40M4N02 P40M4N03 P40M4N05 P40M4N10 P40M4N15 P40M4N P50M4N03 P50M4N05 P50M4N10 P50M4N15 P50M4N25 Manual Valve w/10 ft. Motor Pendant P30W3N01 P30W3N02 P30W3N P40W3N02 P40W3N03 P40W3N05 P40W3N10 P40W3N15 P40W3N P50W3N03 P50W3N05 P50W3N10 P50W3N15 P50W3N25 P30W4N01 P30W4N02 P30W4N P40W4N02 P40W4N03 P40W4N05 P40W4N10 P40W4N15 P40W4N P50W4N03 P50W4N05 P50W4N10 P50W4N15 P50W4N25 Solenoid Valve w/10 ft. Pendant & Locking Plate P30S3L01 P30S3L02 P30S3L P40S3L02 P40S3L03 P40S3L05 P40S3L10 P40S3L15 P40S3L P50S3L03 P50S3L05 P50S3L10 P50S3L15 P50S3L25 P30S4L01 P30S4L02 P30S4L P40S4L02 P40S4L03 P40S4L05 P40S4L10 P40S4L15 P40S4L P50S4L03 P50S4L05 P50S4L10 P50S4L15 P50S4L25 * dvance position holds pressure with motor running or off. Return retracts cylinder with motor off ** dvance position holds pressure with motor running and cylinder Returns when button is released. 53

54 lectric Pumps lectric Power Source P30 Series 3/8"-18 NPT 5/8-18UN H P50M4N03 P40/P50 Series Pump ccessories See the assortment of accessories designed to work with these pumps. pg 69 3/8"-18 NPT Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Instructions Visit our O S and ON TS section to review the best methods of operation. lways be prepared. pg 92 5/8-18UN P40/P50 Series With asters 3/8"-18 NPT H Pressure Settings ustom pressure settings available upon request. ontact your local V dealer. 5/8-18UN Reservoir Sizing Recommended reservoir sizing is xtended + Hose Volume Oil apacity x 1.3 H Reservoir Size imensional Table Pump Weight by Series* (lbs) H P30 P40 P50 1 al al al al al al al * Pump weights include oil.

55 Single Phase Pump Matrix hart If you don t see a pump that would fit your application needs, you can custom build a pump to your desired specifications. Use this Pump Matrix hart as a guide for creating your very own custom built lectric Pump. or assistance in building your pump, call your local V Representative. P 30 S4L 02 1 Product Type Motor Type low roup 1 - Product Type P 2 - Motor Type 3 - low roup Pump Valve Type /Operation Induction lectric Motor, T 293/18 350/10,000 psi, 0.5 Hp 311/37 700/10,000 psi, 1.0 Hp 476/61 700/10,000 psi, 1.5 Hp 4 - Valve Type/Operation MR WMR MP SP H2S Reservoir Size Voltage Pump Mounted Manifold lock - Pressure & Return Ports Only MR lock w/10ft Motor ontrol Pendant ump Valve w/motor pendant 2W/2P ump Solenoid Valve w/pendant 3W/2P (Spool Type Valve) Solenoid Valve 2W/2P - Pendant ontrol On/Off Only (Poppet Type Valve) Pump Options P Series Ordering xample P30S4L02- fter reviewing this model number, we know that the pump has the following specifications: - lectric power source - ½ Hp flow group - Solenoid Valve w/locking Plate 4W/3P - 2 gallon reservoir tank - xternal Pressure djustment lock Pumps M2N M3N M4N M3L M4L W2N W3N W4N W3L W4L S3N S4N S3L S4L 5 - Reservoir Size Voltage 1 allon 2 allons 3 allons 5 allons 10 allons 15 allons 25 allons 120V 1 ph 60 Hz - US Plug NM 5-15P 230V 1 ph 50 Hz - uropean Plug 240V 1 ph 60 Hz - No Plug 7 - Pump Options M P U W Manual Valve 3W/2P Manual Valve 3W/3P Manual Valve 4W/3P Manual Valve 3W/3P w/locking Plate Manual Valve 4W/3P w/locking Plate Manual Valve 3W/2P w/10ft Motor ontrol Pendant Manual Valve 3W/3P w/10ft Motor ontrol Pendant Manual Valve 4W/3P w/10ft Motor ontrol Pendant Manual Valve 3W/3P w/locking Plate and 10ft Motor ontrol Pendant Manual Valve 4W/3P w/locking Plate and 10ft Motor ontrol Pendant Solenoid Valve 3W/3P (Spool Type) Solenoid Valve 4W/3P (Spool Type) Solenoid Valve 3W/3P w/locking Plate (Spool Type Valve) Solenoid Valve 4W/3P w/locking Plate (Spool Type Valve) xternal Pressure djustment lock (available on any models with 3W/3P or 4W/3P) auge w/auge dapter 0-15,000 psi 2-1/2 Wet - Installed Port Intermittent Motor Option (available on solenoid equipped models only XPT H2S option) Pressure Switch (available on solenoid equipped models only) oot ontrol Switch (available on solenoid equipped models only) Wireless ontrol (available on solenoid equipped models only) P30S4L02- Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 Not all options are available in all configurations. Table is for reference only. Please consult your local V dealer if you want to order a custom pump or if you have questions. 55

56 3-Phase lectric Pumps lectric Power Source P40SP02 P60S4L06 Pressure Settings ustom pressure settings available upon request. ontact your local V dealer. Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 ump Solenoid Valve w/10 ft. Pendant ll hand pendants are wired with 24 V Quiet operation meets OSH regulations (80d) 2 speed operation allows for faster cylinder advance ull load starting capacities Internal suction strainer keeps contamination from damaging pump Rugged durable design meets the demands of industrial applications Precision components to minimize wear and improve overall dependability Motors are rated 50/60 Hz for voltage Reservoirs equipped with sight level gauges P40 models are standard as 240 V 60 Hz P60 s are standard as 480 V 60 Hz Use with Type low Rate 1 st Stage 2 nd Stage in 3 /min psi in 3 /min psi Motor Size*** 2W/2P dvance/return (uto*) , Hp , Hp 3W/2P dvance/return** , Hp , Hp Manual Valve 3W/3P dvance/hold Return , Hp , Hp 4W/3P dvance/hold/return , Hp , Hp Solenoid Valve w/10 ft. Pendant & Locking Plate 3W/3P dvance/hold Return , Hp , Hp 4W/3P dvance/hold/return , Hp , Hp * dvance position holds pressure with motor running or off. Return retracts cylinder with motor off ** dvance position holds pressure with motor running and cylinder Returns when button is released. *** Standard voltage on the 1 Hp pump is V 60 Hz; 3 Hp pump is V 60 Hz

57 40 allon Reservoir eatures 4 Point Lifting yes P Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. P60S4L40J pg69 Pumps The 40-allon Reservoir is fabricated with a baffle separating return oil from suction oil. omes standard with an aluminum sight and temperature gauge. dditional Voltages dditional voltage options are available, see part number matrix for options pg 59 Usable Oil apacity 2 al 3 al 5 al 6 al 10 al 15 al 25 al 40 al ump Solenoid Valve w/10 ft. Pendant P40H2S02 P40H2S03 P40H2S05 - P40H2S10 P40H2S15 P40H2S P60H2S06J P60H2S10J P60H2S15J - P60H2S40J P40SP02 P40SP03 P40SP05 - P40SP10 P40SP15 P40SP P60SP06J P60SP10J P60SP15J - P60SP40J Manual Valve P40M3N02 P40M3N03 P40M3N05 - P40M3N10 P40M3N15 P40M3N P60M3N06J P60M3N10J P60M3N15J - P60M3N40J P40M4N02 P40M4N03 P40M4N05 - P40M4N10 P40M4N15 P40M4N P60M4N06J P60M4N10J P60M4N15J - P60M4N40J Solenoid Valve w/10 ft. Pendant & Locking Plate P40S3L02 P40S3L03 P40S3L05 - P40S3L10 P40S3L15 P40S3L P60S3L06J P60S3L10J P60S3L15J - P60S3L40J P40S4L02 P40S4L03 P40S4L05 - P40S4L10 P40S4L15 P40S4L P60S4L06J P60S4L10J P60S4L15J - P60S4L40J * dvance position holds pressure with motor running or off. Return retracts cylinder with motor off ** dvance position holds pressure with motor running and cylinder Returns when button is released. *** Standard voltage on the 1 Hp pump is V 60 Hz; 3 Hp pump is V 60 Hz 57

58 3-Phase lectric Pumps lectric Power Source P60S4L40J P60M4N06 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Pressure Settings ustom pressure settings available upon request. ontact your local V dealer. H Reservoir Size imensional Table (in.) Pump Weight by Series* (lbs.) H P40 2 al al al al al al Reservoir Size imensional Table (in.) Pump Weight by Series* (lbs.) H P60 6 al al al al * Pump weights include oil.

59 3-Phase Pump Matrix hart If you don t see a pump that would fit your application needs, you can custom build a pump to your desired specifications. Use this Pump Matrix hart as a guide for creating your very own custom built lectric Pump. or assistance in building your pump, call your local V Representative. P 40 SP 02 1 Product Type Motor Type low roup 1 - Product Type P 2 - Motor Type 3 - low roup Pump Valve Type /Operation Induction lectric Motor, T 311/37 in 3 700/10,000 psi, 1.0 Hp 592/110 in 3 700/10,000 psi, 3.0 Hp 4 - Valve Type/Operation MR Reservoir Size Pump Mounted Manifold lock - Pressure & Return Ports Only 6 7 Voltage Pump Options P Series Ordering xample P40SP02 fter reviewing this model number, we know that the pump has the following specifications: - lectric power source - 1 Hp flow group - ump Solenoid Valve w/pendant 3W/2P - 2 gallon reservoir tank V 3 ph 60 Hz Voltage - No Plug Pumps SP H2S ump Solenoid Valve w/pendant 3W/2P (Spool Type Valve) Solenoid Valve 2W/2P - Pendant ontrol On/Off Only (Poppet Type Valve) M2N M3N M4N M3L M4L Manual Valve 3W/2P Manual Valve 3W/3P Manual Valve 4W/3P Manual Valve 3W/3P w/locking Plate Manual Valve 4W/3P w/locking Plate P40SP02 S3N S4N S3L S4L 5 - Reservoir Size W J P U W Solenoid Valve 3W/3P (Spool Type) Solenoid Valve 4W/3P (Spool Type) Solenoid Valve 3W/3P w/locking Plate (Spool Type Valve) Solenoid Valve 4W/3P w/locking Plate (Spool Type Valve) 2 allon 3 allons 5 allons 6 allons 10 allons 15 allons 25 allons 40 allons 6 - Voltage V 3 ph 60 Hz - No Plug V 3 ph 50 Hz - No Plug V 3 ph 60 Hz - No Plug or Wire 7 - Pump Options xternal Pressure djustment lock (available on any models with 3W/3P or 4W/3P) auge w/auge dapter 0-15,000 psi 2-1/2 Wet - Installed Port Pressure Switch (available on solenoid equipped models only) oot ontrol Switch (available on solenoid equipped models only) Wireless ontrol (available on solenoid equipped models only) Pump ccessories See the assortment of accessories designed to work with these pumps. Safety Instructions pg 69 Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 Not all options are available in all configurations. Table is for reference only. Please consult your local V dealer if you want to order a custom pump or if you have questions. 59

60 as and iesel Pumps P/P Series - Portable Power P70M4N05 P80S4L05 P90S4L10 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. as Pumps iesel Pumps Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 as engine pumps will provide 10,000 psi at remote locations Industrial grade 5.5 or 10.2 hp Honda as ngine Ideal for applications at remote locations Two speed pump designed for rapid cylinder advance as pump features a sturdy protective roll cage for use in the toughest environments Manual control valve for use with single or double acting cylinders or tools Optional electric start iesel engine pumps will provide 10,000 psi at remote locations Industrial grade 7.3 hp HTZ iesel engine Locking solenoid control valve for use with single or double acting cylinders or tools Two speed pump designed for rapid cylinder advance Pump features a sturdy protective roll cage for use in the toughest environments Ideal for application when diesel fuel in remote environments is required omes standard with electric start Valve unction Valve Type Use with Type 3W/3P dvance/hold Return 4W/3P dvance/hold Return low Rate 1 st Stage 2 nd Stage in 3 /min psi in 3 /min psi Manual ,000 Solenoid ,000 Solenoid ,000 Manual ,000 Solenoid ,000 Solenoid ,

61 as/iesel Pump Matrix hart If you don t see a pump that would fit your application needs, you can custom build a pump to your desired specifications. Use this Pump Matrix hart as a guide for creating your very own custom gas/diesel pump. or assistance in building your pump, call your local V Representative. P 90 S4L 10 1 Product Type Motor Type 1 - Product Type P 3 - low roup Pump 2 - Motor Type as Motor iesel Motor 2 3 4* 5 low roup Valve Type /Operation 427/100 in 3 700/10,000 psi, 5.5 Hp 600/200 in 3 700/10,000 psi, 7.3 Hp 1070/200 in 3 700/10,000 psi, 10.2 Hp 4* - Valve Type/Operation MR Reservoir Size Pump Mounted Manifold lock - Pressure & Return Ports Only 7 Pump Options P/P Series Ordering xample P90S4L10 fter reviewing this model number, we know that the pump has the following specifications: - asoline power source Hp flow group - Solenoid Valve w/locking Plate 4W/3P - 10 gallon reservoir tank Pumps SP H2S ump Solenoid Valve w/pendant 3W/2P (Spool Type Valve) Solenoid Valve 2W/2P - Pendant ontrol On/Off Only (Poppet Type Valve) M2N M3N M4N M3L M4L Manual Valve 3W/2P Manual Valve 3W/3P Manual Valve 4W/3P Manual Valve 3W/3P w/locking Plate Manual Valve 4W/3P w/locking Plate P90S4L10 Roll ages S3N S4N S3L S4L 5 - Reservoir Size P W Solenoid Valve 3W/3P (Spool Type) Solenoid Valve 4W/3P (Spool Type) Solenoid Valve 3W/3P w/locking Plate (Spool Type Valve) Solenoid Valve 4W/3P w/locking Plate (Spool Type Valve) 5 allons 10 allons 15 allons 25 allons 40 allons 6 - Pump Options xternal Pressure djustment lock (available on any models with 3W/3P or 4W/3P) auge w/auge dapter 0-15,000 psi 2-1/2 Wet - Installed Port Pressure Switch (available on solenoid equipped models only) oot ontrol Switch (available on solenoid equipped models only) Wireless ontrol (available on solenoid equipped models only) * Solenoid options are not available on the P70 Series as Pumps Not all options are available in all configurations. Table is for reference only. Please consult your local V dealer if you want to order a custom pump or if you have questions. ll gas and diesel pumps are equipped with roll cages to prevent any damage that might occur on a job site. Wireless ontroller P90 and P80 pumps have an optional wireless controller. Visit the gas/diesel pump matrix and pump accessories page for more details. pg 71 Optional lectric Start P90 has an optional electric start. P80 comes standard with an electric start. Refer to the as/iesel Pump Matrix. Usable Oil apacity Motor HP / Type 5 allons 10 allons 15 allons 40 allons as Hp Honda P70M3N as Hp Honda P90S3L05 P90S3L10 P90S3L15 P90S3L40 iesel Hp HTZ P80S3L05 P80S3L10 P80S3L15 P80S3L40 as Hp Honda P70M4N as Hp Honda P90S4L05 P90S4L10 P90S4L15 P90S4L40 iesel Hp HTZ P80S4L05 P80S4L10 P80S4L15 P80S4L40 61

62 as and iesel Pumps P70/P90/P80 Series P80S4L05 P90M4N10 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. H Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg 69 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 H Related Product: Hoses We offer a variety of hoses, fittings, lengths and materials. pg 72 * as Pumps imensions H P70xxx P90xxx P90xxx iesel Pumps P80xxx P80xxx P80xxx Weight** (lbs) * xxx in the model number refers to the type of valve you may use on the gas/diesel engine pump. Refer to your local V dealer or the Matrix hart (on page 61) to build your own pump. ** Pump weights include oil.

63 Universal Motor Pumps PU Series - Light-Weight Pumps Portable, light weight and compact design Universal Motor, starts under full load and is available in either 120V 50/60 HZ or 240V 50/60HZ 10ft 24 V pendant control for safety Weighs only 37 lbs. with oil xternal pressure adjustment is available esigned for intermittent duty operation auge port on control valve PU20M4N01 PU20MP01 Hydraulic ear Pullers 5, 10, 15, 25, 50 & 100 Ton Hydraulic ear Pullers come with a safety cage design help keep the jaws tight to the gear and prevent slippage that can cause injury. Pair these with V s PU20M3N01 Lightweight e-pump for portability. pg 83 Pumps Hydraulic Nut Splitters /4 -NPT 1/4 -NPT 1/4 -NPT vailable in 3 models, each nut splitter can split a wide range of nut sizes thereby reducing the number of splitters needed. The V PU20MP01 dump style pump works well with these splitters pg /8-18NPT lange Spreaders V s Pin Type lange Spreaders are available in both 5 & 10 Ton models and well suited for most environments. or portability and speed the PU20M3N01 would be an ideal choice. pg 81 HP-1 Pump Kit HP-1 Pump Kit contains: PU20M3N01, 3814, W2514, S3838, and H38M Valve unction low Rate Voltage 50/60 Hz Motor 1st Stage 2nd Stage 120 V 240 V Size in 3 /min psi in 3 /min psi # # Weight (lbs) Length 2W/2P dvance/return , Hp PU20MP01 PU20MP W/3P dvance/hold Return , Hp PU20M3N01 PU20M3N W/3P dvance/hold/return , Hp PU20M4N01 PU20M4N Width 63

64 ombinations Pump and Sets ach set includes: ¼" I 6 foot Hydraulic Hose ⅜" High low Male oupler dapter (SP3 s Only) 2½" ace iameter Wet auge Single cting Type apacity (Ton) Stroke ollapsed Hand Pump P350 Hand Pump P1000 Hand Pump P2301 ir Pump P H SP H SP S H SP S eneral Purpose s 10 H SP S HT SP T - S T H SP S HT SP T - S T 15 H SP S H SP S H SP S H SP S H SP S H SP S H SP S H SP S H SP lat ody s H0503* SP H0503 * SP H SP H SP H SP H SP H SP H SP H SP H SP H SP H SP H SP * H0503 comes with R38M coupler ** H1202 comes with RZ14M coupler

65 We see here our combo kit S L getting set up to lift a load. This combo kit includes a HL3002 cylinder, P1500 air pump, S3814 hose/h38m coupler set, 3814 gauge adapter and a W2514 pressure gauge. ombinations Pump and Sets Single cting Type apacity (Ton) Stroke ollapsed Hand Pump P350 Hand Pump P1000 Hand Pump P2301 ir Pump P1500 H1201T** SP3-1201T Hollow Hole s 12 H1202T** SP3-1202T H1202XT** SP3-1202XT H1203XT SP XT H2002T SP T - S T Low Profile s H3002T SP T H3006T SP T - S T H6003T SP T - S T 60 H6006T SP T S T 100 H10003T SP T S T 10 HL SP3-1001L SP L - S L 20 HL SP3-2002L SP L - S L ombination Kits 30 HL SP3-3002L SP L - S L 50 HL SP L - S L 60 HL6003KK SP L SP L S L 100 HL SP L SP L S L Lock Nut s HLN SP LN S LN 55 HLN SP LN S LN HLN SP LN S LN luminum s HU3002T SP3-3002U - - S U 30 HU3006T SP U - S U 50 HU5006T SP U S U * H0503 comes with R38M coupler ** H1202 comes with RZ14M coupler 65

66 low ontrol Valves 10,000 PSI Rated VN1 and VN /8-18NPT V Ø.32 TYP O VP3 3/8-18 NPT Valve Type Ports pplications Hydraulic Symbol Needle Valve VN1 VN3 ¼"-18NPT "-18NPT ontrols cylinder speed and acts as temporary shut-off valve for load holding. heck Valve V3 "-18NPT llows flow in one direction only. Pilot Operated heck Valve VP3 "-18NPT Mounted in line to a cylinder which will hold pressure in the event of pressure loss in the system. Most often used on double-acting cylinders with pilot port, receiving pressure from a tee off of the cylinder retracting line. Pilot pressure ratio 15% or 6.5:

67 low ontrol Valves 10,000 PSI Rated 3.05" 4.53" 1.73" 3/8"-18NPT Ø 1.5" VR3 7.44" 3/8"-18NPT 4.65" 4.79" 2.28" 0.63" 0.63" VM3 1.02" 2.76" 3.94" 4.65" 4.79" VMS3 Valve Type Pressure Relief Valve VR3 Ports pplications Hydraulic Symbol -18NPT 0.63" 2.76" 3.94" 2.28" ontrols pressure developed by the pump in hydraulic loop. y-pass occurs when preset pressure reaches 0-10,000 PSI. Turns clockwise to increase pressure, counter-clockwise to decrease. 0.63" 1.02" ontrol Valves / ccessories VM3-18NPT Mounted in line to a cylinder and will hold pressure in the cylinder in the event of pressure loss in the system. Pressure is manually released. Manual Operated heck Valve VMS3-18NPT Mounted in line to a cylinder and will hold pressure in the cylinder in the event of pressure loss in the system. This model is equipped with high-pressure bypass. Pressure is manually released. 67

68 Manifolds 10,000 PSI Rated 1.5" 1/4" - 20 UN 0.25" epth (x2) 0.82" 2" 1.63" M7 MH6 3/8"-18NPT (x7) 0.625" 0.25" 3/8"-18NPT (x6) 8" 2" 3" 2 ؼ" (x2) 1.25" 2.24" 0.625" 1.25" 1.5" 1.5" 1.5" 1.25" 0.625" M " 0.25" 3.25" Ø 1/4" (x2) 15.48" 8" 3.25" 3/8"-18NPT (x7) 0.625" 0.625" 1.25" 0.625" 1.25" 4" 4" 4" 1.25" M4 Ø 0.28" M2 Ø 0.28" 0.5" 0.5" 11" 0.5" 0.5" 5" 3/8-18NPT (x5) 3.86" 4.13" 3/8-18NPT (x3) 3.86" 4.13" 1" 1" 1.62" 2.61" 1.5" 3" 3" 3" 12" 1.625" 2.61" 1.5" 3" 6" MH6 ontrols the flow of (5) hydraulic hoses from one central location Sturdy design for long product life onvenient carry handle MH6 Manifold Type of Ports Port Size Mounting Holes 6-Port Hexagon Manifold MH6 6 ⅜ -18NPT ¼ -20UN 7 Long Manifold M7 7 ⅜ -18NPT ¼ -20UN 14 Long Manifold M14 7 ⅜ -18NPT ¼ -20UN Manifold with Two Needle Valves M2 3 ⅜ -18NPT 0.28 ia. Manifold with our Needle Valves M4 5 ⅜ -18NPT 0.28 ia. Spider Valves MH6 6 ⅜ -18NPT

69 Hydraulic Pressure auge igital or nalog 2514 W4014 W ack-lit digital pressure gauge displays in: PSI, R, K/M2 and MPa auge Type ertified auge ace ia Thread Material Pressure Range (psi) (bar) Major raduation (psi) Minor raduation (psi) raduation Major raduation (bar) 3814 Minor raduation (bar) igital /4"-18 NPT Stainless 0-10, ry Wet /4"-18 NPT rass 0-15, ,034 2, /4"-18 NPT rass 0-15, ,034 2, /2"-14 NPT rass 0-10, , /2"-14 NPT rass 0-10, , W /4"-18 NPT rass 0-15, ,034 2, W /4"-18 NPT rass 0-15, ,034 2, W4014-RT yes /4"-18 NPT Stainless 0-20, ,379 2, W /2"-14 NPT rass 0-10, , W /2"-14 NPT rass 0-10, , auge dapter 10,000 PSI Rated ontrol Valves / ccessories 3812 imensions ¼ -18NPT ⅜ -18NPT ⅜ -18NPT ½"-14NPT ⅜"-18NPT ⅜"-18NPT ½"-14NPT ⅜"-18NPT ⅜"-18NPT

70 Hydraulic Oil ISO 46 Recommended for all V cylinders and pumps Volume (gal) Viscosity Index (min) 100 (S.U.S.) 210 (S.U.S.) STM rade lash Point ( ) Pour Point ( ) PI ravity oupler ust over Keeps contaminants out of the system 38 oupler ompatibility H38, H38, H38M 38 Solenoid Valves Pump Mounted Pump mounted solenoid kits converts your manual pump to an electrically controlled pump. 8.54" 7.24" 3" 0.93" PS33L 3/8-16UN-2LX4 Use With Valve Type Valve unction Hydraulic Symbol Schematic low path Weight (lbs) Single cting PS33L Solenoid 115V dvance/ Hold/Return 7.0 Single cting P33 Solenoid 115V dvance/ / Return ouble cting PS43L Solenoid 115V dvance/ Hold/Return

71 H38 H Hydraulic ouplers 10,000 PSI Rated S38 H14 J J H R38 RZ14 J H oupler Type omplete Set J H s Male Half emale Half imensions * H J High-low oupler H38 H38M H /8"-18NPT lush-ace oupler S38 S38M S /8"-18NPT Regular-low oupler R38 R38M R /8"-18NPT High-low oupler H14 H14M H /4"-18NPT Zinc oupler RZ14 RZ14M RZ /4"-18NPT * Value is total length when male and female couplers are connected. oot controls with 10 cord. This option replaces the hand controls on solenoid equipped models. WR12K P1 P2 J H oot Pedals Single or ouble Hands free pump operation an be used with all pumps equipped with solenoid valves Wireless Hand Held ontrol llows for increased mobility and safety Nominal range of 325 feet (greater w/ unobstructed line of sight) atteries last 100 hours with continuous key press (2 batteries) or hands free pump operation ontact your local V dealer for further information ontrol Valves / ccessories xternal Pressure djustment Sandwich Mounted PW-S1 PW-S2 PW-S3 PW-S4 Pressure dj. Range (psi) 1,000 ~ 10,000 Interval (psi) 50 Suitable P Series, 1 al. Reservoir P Series, 2+ al. Reservoir PU20 Series Pump PU20MP Series PW-S1 Pressure can be adjusted externally (1,000-10,000 psi) Works with single and double acting cylinders 71

72 Pump Mounted Manifold lock MR2 MR2 onverts V pumps with mounted valves for use with remote mounted valves omes with 4 mounting bolts Pressure Switch VS1 utomatically shuts off electric pump when predetermined system pressure is reached djustable Pressure Range lectrical Rating Port Size Weight (lbs) VS1 1,000~10,150 psi V max ¼"-18NPT 1.32 VS1 Hydraulic Hoses Rubber or Thermoplastic ll hoses are designed with a Maximum Working Pressure of 10,000 psi Heavy uty Rubber Hoses are made with 2 layers of steel braids and comply with the Material Handling Institutes IJ-100 standard for hoses and carries a 2:1 safety factor Thermoplastic Hoses are made with 2 layers of steel braids with wrapped in a Polyurethane jacket and carries a 4:1 safety factor Hose nd 2 Hose I Hose Length (ft) Hose nd 1 1/4"-18 NPT 3/8"-18 NPT R38M oupler H38M oupler Rubber Thermoplastic Rubber Thermoplastic Rubber Thermoplastic Rubber Thermoplastic 6 ¼"-18 NPT S1414 T S1414M T1414M 2 ⅜"-18 NPT - - S S3814MR - S3814M - 3 ⅜ -18 NPT - - S3814 T3814 S3814RM - S3814M - ¼ 6 ⅜ -18 NPT - - S3814 T3814 S3814MR - S3814M T3814M 10 ⅜ -18 NPT - - S3814 T3814 S3814RM - S3814M T3814M 20 ⅜ -18 NPT - - S3814 T3814 S3814RM - S3814M T3814M 30 ⅜ -18 NPT - - S3814 T S3814M T3814M 6 ⅜ -18 NPT - - S3838 T3838 S3838MR - S3838M T3838M 10 ⅜ -18 NPT - - S3838 T S3838M T3838M ⅜ 20 ⅜ -18 NPT - - S3838 T S3838M T3838M 30 ⅜ -18 NPT - - S3838 T S3838M T3838M 50 ⅜ -18 NPT - - S3838 T S3838M T3838M

73 2.97" PW2 6.37" Pump Mounted Valves or P, P and P Pumps Only 5.58" PW33L 4.10" 3/8-18NPT 0.93" 6.23" 6.08" 1.75" 4.63" 2.31" 0.87" PW3 and PW4 PW43L 6.13" 5.66" 5.58" 3/8-18NPT 3.84" 0.93" 6.23" 6.08" 1.75" 3.25" 0.87" 4.63" Valve Operation Manual Valve Type 3-Way, 2-Position 3-way, 3-Position, Tandem center 4-Way, 3-Position, Tandem center Use w/ Single cting Single cting ouble cting Hydraulic Symbol Schematic low path PW2-4 PW3 4 PW4 3 Weight (lbs) ontrol Valves / ccessories 3-Way, 3-Position, Tandem center, Locking Single cting PW33L 6 4-Way, 3-Position, Tandem center, Locking ouble cting PW43L 6 73

74 Remote Mounted irectional ontrol Valves Not to be used with Hand Pumps PR33, PR33 PR33L, PR33L PR43, PR43 PR43L 3.80" 4.49" 4.21" 4.49" 6.93" 6.93" 6.93" 6.93" 3/8-18NPT (x3) 0.75" 4.21" 6.16" 3/8"-18NPT (x3) 3/8-18NPT(x4) 0.75" T 4.21" 6.16" 1/4"-18NPT (x4) 1/4-20UN (x4) 1.38" 0.75" 1.38" 1/4"-20UN (x4) 1/4-20UN(x4) 1.38" 0.75" 1.38" 1/4-20UN (x4)" Valve Operation Valve Type Use w/ Hydraulic Symbol Schematic low path Weight (lbs) 3-Way, 3 Position, Tandem center PR Way, 3 Position, losed center PR Way, 3 Position, Tandem center, Locking Single cting PR33L Way, 3 Position, losed center, Locking PR33L 5.7 Manual 4-Way, 3 Position, Tandem center PR Way, 3 Position, Tandem center, Locking PR43L 5.7 ouble cting 4-Way, 3 Position, losed center PR Way, 3 Position, losed center, Locking PR43L ll valves have a detent in the center position.

75 ittings 10,000 PSI Rated itting Type imensions isplay Image dapters dapter ½ -14NPT - emale ⅜ -18NPT - Male T Male ⅜ -18NPT emale ½ -14NPT dapter ½ -14NPT - emale ¼ -18NPT - Male T Male ¼ -18NPT emale ½ -14NPT itting Male ¼ -18NPT emale ⅜ -18NPT ushings/onnectors ushing Male ⅜ -18NPT emale ¼ -18NPT ushing Male ½ -14NPT emale ¼ -18NPT ushing Male ½ -14NPT emale ⅜ -18NPT 2 way 45 onnector Street lbow, ⅜ to ⅜ -NPT T Male ⅜ -18NPT emale ⅜ -18NPT ouplings 2 way 90 onnector Street lbow, ⅜ to ⅜ -NPT 2 way 90 onnector lbow, ⅜ to ⅜ - NPT 3 Way onnector ⅜ to ⅜ - NPT 4 Way onnector ross, ⅜ to ⅜ - NPT T T T T Male ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT emale ⅜ -18NPT ontrol Valves / ccessories oupling Reducing onnector, ⅜ to ¼ -NPT T emale ¼ -18NPT emale ⅜ -18NPT oupling Reducing onnector, ½ to ⅜ - NPT T emale ½ -14NPT emale ⅜ -18NPT oupling ⅜ to ⅜ - NPT T emale ⅜ -18NPT emale ⅜ -18NPT Hex Nipples Male onnector Hex Nipple, ¼ to ¼ - NPT T Male ¼ -18NPT Male ¼-18NPT Male onnector Hex Nipple, ⅜ to ⅜ - NPT T Male ⅜ -18NPT Male ⅜ -18NPT Male onnector Hex Nipple, ¼ to ⅜ - NPT T Male ¼ -18NPT Male ⅜ -18NPT 75

76 Presses Reference Image Page Presses Page / Reference Image Movable Head Shop Press 77 Shop Press ccessories 80 ixed Head Shop Presses Press uards 80 Tools Page / Reference Image lange Spreaders 81 uck ill Spreaders 81 Oil ield Valve Seat Pullers Ton with ase and Needle Valve Kit 82 Hydraulic ench Vise 82 Hydraulic ear Pullers 83 Mechanical ear Pullers 83 Hydraulic Nut Splitters 83 Maintenance/ottle Jacks Page

77 55 Ton Shop Press with Movable Work Head Welded steel construction moves from side to side and locks into position Multi-position bed for work height adjustment Pump, cylinder, hose, gauge and fittings are included H-rame Movable work head (min) K (max) J H apacity (Tons) Pump Type Pump Stroke (In) ed Positions Press imensions (H x L x W) Working Space (Min - Max) Single cting IPR5506 ir P2000 H " X 46.5" X 30" 15.38" X 51.38" IPR5506 lectric P40W3N02 H " X 46.5" X 30" 15.38" X 51.38" 55 IPR5513 ir P3801 H " X 46.5" X 30" 15.38" X 51.38" IPR5513 lectric P40W3N02 H " X 46.5" X 30" 15.38" X 51.38" IPRS5513 lectric/solenoid P40S3L02 H " X 46.5" X 30" 15.38" X 51.38" ouble cting 55 Single cting IPR5506 ir P3801M H " X 46.5" X 30" 15.38" X 51.38" IPR5513 lectric P40W4N02 H " X 46.5" X 30" 15.38" X 51.38" IPRS5513 lectric/solenoid P40S4L02 H " X 46.5" X 30" 15.38" X 51.38" (Min.) (Max.) imensions H J K IPR IPR Weight (lbs) Shop Presses / Tools IPR IPR IPRS ouble cting IPR IPR IPRS

78 Shop Presses Welded steel construction Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs Multi-position bed for work height adjustment xcellent for bending, bonding, or straightening applications H10010 H2506 H5506 Pump P40W3N02 Pump P1500 Pump P2301 Press IP2506 Press IMP5506 Press IP10010 apacity (Tons) Single cting ouble cting 25 Pump Type Pump Stroke (In) ed Positions Press imensions (H X L X W) Working Space (Min - Max) IMP2506 Manual P1000 H X 48 X X IP2506 ir P1500 H X 48 X X IP2506 lectric P30W3N01 H X 48 X X IMP2514 Manual P2001 H X 48 X X IP2514 ir P2000 H X 48 X X IP2514 lectric P30W3N01 H X 48 X X IPS2514 lectric/solenoid P30S3L01 H X 48 X X IMP5506 Manual P2301 H X 56 X X 55.5 IP5506 ir P1500 H X 56 X X 55.5 IP5506 lectric P40W3N02 H X 56 X X 55.5 IP5513 ir P3801 H X 56 X X 55.5 IP5513 lectric P40W3N02 H X 56 X X 55.5 IP10010 ir P7550 H X 63 X X 51 IP10010 lectric P40W3N02 H X 63 X X 51 IPS10010 lectric/solenoid P40S3L02 H X 63 X X 51 IMP2506 Manual P2301M H X 48 X X IP2506 ir P3801M H X 48 X X IP2506 lectric P30W4N01 H X 48 X X IPS2506 lectric/solenoid P30S4L01 H X 48 X X IP5513 lectric P40W4N02 H X 56 X X IP10010 lectric P40W4N02 H X 63 X X 51 IPS10010 lectric/solenoid P40S4L02 H X 63 X X

79 (min) K I Series (max) J Made in the U.S.. ll press frames are made in the US and meet ISO 9001/2008 and certification. Press ccessories See the assortment of accessories designed to work with these product. pg 80 H Press uards dd a layer of protection between the operator and the work for extra safety. pg 80 (Min.) (Max.) imensions H J K Weight (lbs) Single cting IMP IP IP IMP IP IP IPS IMP IP IP IP IP IP IP IPS ouble cting IMP IP IP IPS IP IP IPS Shop Presses / Tools 79

80 25 Ton Shop Press ccessories S25 includes: Rod forcing cap V push adapter Threaded adapter ¾ push adapter 1 push adapter rbor plates (in pairs) 55 Ton Shop Press ccessories S55 includes: Rod forcing cap Threaded adapter 1½ push adapter 1¼ push adapter V push adapter rbor plates (in pairs) 100 Ton Shop Press ccessory Press uards dd a barrier layer between the operator and the work for added safety. Press guards help keep hands out of work area and shields flying debris from being ejected from the press and prevents them from becoming a hazard. P100 includes: rbor plates (in pairs) Sturdy construction its all types of shop presses (single and double acting) Prevent possible injury/damage from flying debris from occurring in case of an issue apacity (tons) SP25 25 SP & 100 Shop Press ompatibility ll Manual, lectric and ir 25 Tons Presses (Single and ouble cting) ll Manual, lectric and ir 55 and 100 Tons Presses (Single and ouble cting)

81 lange Spreader Pin Type SP This combination kit works well with our Hand Pump. See our combo section for more details. Kit: SP HS05 pg 64 SP This combination kit works well with our oot Pump. See our combo section for more details. esigned for heavy duty industrial environment djustable jaw width for a wide range of applications and ease of use Spare wedge attachment comes standard apacity Stroke Oil apacity Maximum lange HS10 (tons) (in.) (in³) Thickness (in.) 5 HS X 2.3 HS05 10 HS X 3.6 Spreaders uck ill Spreader SR05 PITY 12 TON SR10 3/8"- 18NPT SR05 esigned to work in confined working spaces Ideal for wedging, prying, and opening High strength forged steel Spring return for easy operation 3/8"- 18NPT SR10 Shop Presses / Tools apacity (tons) ffective rea (in²) Oil apacity (in³) imensions Weight (lbs) 0.5 SR SR

82 Valve Seat Puller rac Pump Maintenance Pump kit to operate HVSP Series cylinders. Part number: SP12-S4 Pump kit includes: P1201S, S3814, H38M, W4014, and HVSP120 HVSP125 apacity (tons) enter Hole I Stroke ollapsed Weight (lbs) 120 HVSP HVSP SP This combination kit works well with this product. See our combo section for more details. Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. 50 Ton w/ ase & Needle Valve Hydraulic Truck Jack JU506 luminum nodized ram with carry handle Shutoff valve High/low temp functionality H38 3/8-18NPT high flow female coupler 50 9,091 PSI apacity (tons) Hydraulic ench Vise 5 Ton Holding orce Hands free operation with foot pump control ir control valve for variable speed and added safety ast steel construction 52,000 PSI tensile strength Hydraulic pressure closes jaws, spring return opens jaws ollapsed xtended Stroke Weight (lbs) 50 JU HS10 Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 apacity (tons) Jaw Width Jaw learance Jaw Opening HV

83 Hydraulic ear Pullers POSILOK Safety cage design prevents jaws from slipping s are removable for ease of servicing ach puller comes with a lift plate and a ram point set HP503 HP253 HP153 HP103 HP053 apacity (tons) Reach Spread Range Ram Stroke Jaw Style 5 HP xternal 10 HP xternal 15 HP xternal 25 HP xternal 25 HP253I xternal/internal 50 HP xternal 100 HP xternal HP-1 This combination kit will work well with the hydraulic gear pullers. See our combo section for more details. ble to use 2 or 3 jaws Reversible ratchet jaws orged, heat treated high quality steel esigned for heavy duty industrial environment djustable jaw width for a wide range of applications for ease of use asily transportable Mechanical ear Pullers MP07 2, 5, 7 Tons apacity (Ton) Maximum Spread Maximum Reach Screw Length 2 MP02 3-1/4 2-5/8 4-1/2 5 MP /4 7 MP MP05 MP02 Hydraulic Nut Splitter w/ ase HNS105 ompact and Heavy uty Spacers included Straight chisel with a 60/40 angle, and works on all type of materials, including stainless steel hisel can be re-sharpened multiple times omes with a padded tool box to hold the head, cylinder, tips and spacers Safety Instructions Visit our O S and ON TS section to review the best methods of operation. pg lways be prepared. 92 SP This combination kit works well with the hydraulic nut splitter set. See our combo section for more details. Shop Presses / Tools apacity (tons) Nut Size apacity T Stud imension Weight (lbs) 25 HNS HNS /16-7/ HNS POSILOK is a registered trade mark of Posilock Puller Inc. High-low ouplers High-low oupler: H38 is included on all models (except where specified). 83

84 Maintenance Kits / ottle Jacks Page / Reference Image Rail ar Jack 85 Maintenance Kits 85 Lifting ags 86 Lifting ag ccessories 87 Manual ottle Jacks 88 ir/manual ottle Jacks 88 Toe Jacks 88 Mini Jacks 89 OMNI Jacks 89 Orbital Jacks 89 ross Referencing and ngineering Page

85 Rail ar Jack, JR80, lifting the back of a rail car for the operator to start maintenance on the car s wheels. Rail ar Jack ouble cting lum. High strength aluminum construction suitable for rough working environments. Specially designed saddle Rod wiper seals out dirt and contamination onnect under pressure flush face quick couplers with pressure relief feature for ease of installation and/or removal Max. working pressure: 4200 PSI / 290 ar Jack Sets JR8-P45 P45M4N10-1 hp lectric Motor Pump 2x S38JR - xtend Hoses (20 eet) 2x S38JRM - Retract Hoses (20 eet) 2x JR80 s JR80 P45M4N10 JR8-P95 P95M4N hp as ngine Pump 2x S38JR - xtend Hoses (20 eet) 2x S38JRM - Retract Hoses (20 eet) 2x JR80 s JR80 P95M4N10 apacity (tons) Max. Pressure (psi) JR80 Stroke ffective rea (in 2 ) Oil apacity (in 3 ) xtend Retract Weight (lbs) ollapsed Ht. xtended Ht. ore ia. Outside ia. JR Rod ia. Saddle ia. Maintenance Kits 4, 10, 20 Ton Maintenance Kits / ottle Jacks J50100 J50040 J50200 Sets are portable for ease of use on the job site ustom fitted, rugged blow molded storage case 10 ton set has wheels for ease of transport esigned for pushing, spreading, pressing, and more apacity (tons) Pump apacity (psi) ollapsed (in²) Rod xtended (in³) ffective rea (in²) of ttachments 4 8,000 J ,000 J ,000 J * When extension tubes and/or offset attachments are used, the capacity is reduced. Weight (lbs) 85

86 Lifting ags ramid Reinforced lifting bag raising the axle of this train car for maintenance Lifting bags are useful for many different types of applications High pressure air lifting bags require only 1 clearance and can lift up to 86 tons 3 or 4 layers of ramid iber on both sides of the bag to create a lifting bag unequaled in strength and durability. Made in the US and is ISO 9001/2008 and ertified Product replacement 3 year unconditional warranty. Marked with a distinct bulls eye with tonnage rating onical, interlocking surface to limit slippage and aid in stacking. ach bag has either molded carry handles and/or tabs/eyelets Made in the U.S.. ll lifting bags are made in the US and meet ISO 9001/2008 and certification. L-50 apacity (tons) Max. Lifting Max Working Pressure (psi) Reinforcing Material Handles or yelets Length imensions Width eflated Ht L ramid 2 yelets L ramid 4 yelets L ramid 4 yelets L ramid 4 yelets L ramid 2 yelets L ramid 1 Handle L ramid 1 Handle L ramid 2 Handles L ramid 2 Handles L ramid 2 Handles L Steel 4 Handles Weight (lbs)

87 Lifting ag ccessories ramid Reinforced Reference Image escription L-V ir-ock Shut-off Valve W/Safety oupler L-T80 80 cu ft ir Tank, 3,000psi L-R1 ir ottle Regulator w/safety coupler L- L-S L-RH10 L-H16Y ual eadman ontrol w/safety coupler Single eadman ontrol w/safety coupler 10 ft reen Regulator Hose w/safety ouplers 20 ft Yellow High Pressure Hose w/safety coupler Maintenance Kits / ottle Jacks L-H32Y 32 ft Yellow High Pressure Hose w/safety coupler L-H16 20 ft lue High Pressure Hose w/safety coupler L-H32 32 ft lue High Pressure Hose w/safety coupler L-H16R 20 ft Red High Pressure Hose w/safety coupler L-H32R 32 ft Red High Pressure Hose w/safety coupler L-MP4 Master ontrol Pkg #4 L-MP3 Master ontrol Pkg #3 87

88 Manual ottle Jacks Ton Hydraulic system is protected from internal damage by a patented by-pass mechanism (U.S. Patent No.5,946,912) Machined and polished cylinders with die-cut threads provide non-abrasive leak-free performance abricated from hard-cast steel with heat-treated critical stress areas Unique cross-type forged release valve assures positive load control wide, rugged base provides stability and strength apacity (ton) Min. Max. Hydraulic Lifting xtension Screw ir/manual ottle Jacks ase Size Length Width Weight (lbs) 12 J J J J J J Ton ir operation reduces operator fatigue and increases speed compact/powerful air turbo motor (U.S. Patent No. 5,341,723) is equipped to raise the load to the desired height efficiently, effortlessly, and safely Hydraulic system is protected from internal damage by a patented by-pass mechanism (U.S. Patent No.5,946,912) Versatile Quick onnector design provides easy removal of the air hose from the air motor, allowing compact storage or remote operation apacity (ton) *ir Operated Only Toe Jacks Low Min. Max. Hydraulic Lifting xtension Screw Heat treated and chrome plated medium-carbon steel cylinder hrome plated rod promotes longer seal life and optimum performance U.S. Patented by-pass device protects hydraulic system from over travel damage Hydraulic system is protected from internal damage by a patented by-pass mechanism (U.S. Patent No.5,946,912) ase Size Length ase Size Width Input ir Pressure Range (psi) 12 J J J J J18992* Weight (lbs) apacity (tons) Toe Saddle Head Saddle Hydraulic Min. Max. Min. Max. Lifting ase Size (L x W) 3 J x J x J x J x Weight (lbs)

89 Mini Jacks Low profile mini jack ompact and lightweight onvenient for storage ompact J11050 Interchangeable saddle on model J11050 and J11055 J11100 These mini jacks are lightweight and will fit in the palm of your hand. We see here a J11050 Mini Jack. apacity (tons) apacity (tons) Minimum Maximum Hydraulic Lifting ase Size (L x W) Weight (lbs) 5 J x J x J x J x wide, rugged base provides stability and strength while operating in a vertical or horizontal position Hydraulic lift is protected from internal damage by a by-pass mechanism U.S. Patent No. 5,946,912 Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance abricated from hard-cast steel with heat-treated critical stress areas Minimum Maximum Hydraulic Lifting xtension Screw ase Size (L x W) Weight (lbs) 12 J x J x J16123 J11050 OMNI Jacks Multi-Position Jack J16203 Orbital Jacks Rotating Handle Maintenance Kits / ottle Jacks Serrated, heat-treated saddle provides generous lifting area and secure grip Heat-treated extension screw allows low pick-up height adjustment and maximum lift height U.S. Patented built-in by-pass device protects hydraulic system from over-pumping damage J10124 J10126 J10204 J10206 apacity Min Max Hydraulic xtension ase Size Weight Lifting Screw (lbs) J x J x J x J x

90 V ross Reference hart* ompatibility heck Ton V nerpac Power Team Simplex Ton V nerpac Power Team Simplex Single cting s H5502 R R552 H0500 R-50 - R50 H0501 R R51 55 H5504 R R554 H5506 R R556 5 H0503 R R53 H0505 R R55 H0507 R R57 H0509 R R H5513 R R5513 H7506 R R756 H7513 R R7513 H10006 R R1006 H10010 R R10010 H1001 R R101 Threaded s H1002 R R102 H1004 R R HT T - HT T - 10 H1006 R R106 H1008 R R108 luminum s HU2002T R-202 R202 - H1010 R R1010 H1012 R R1012 H1014 R R1014 H1501 R H1502 R R HU2004T R-204 R204 - HU2006T R-206 R206 - HU3002 R-302 R302 - HU3004 R-304 R304 - HU3006 R-306 R306 RS306 HU5002 R-502 R552 RS H1504 R R154 H1506 R R156 H1508 R HU5004 R-504 R554 - HU5006 R-506 R556 RS508 HU5010 R-5010 R H1510 R R1510 H1512 R H1514 R R1514 H2501 R R251 H2502 R R252 H2504 R R254 H2506 R R256 H2508 R R258 H2510 R R2510 HU HU HU10002 R-1002 R1002 RS HU10006 R-1006 R1006 RS1008 HU10010 R Low Profile s 10 HL1001 RS-101 RSS101 RLS HL2002 RS-201 RSS202 RLS HL3002 RS-302 RSS302 RLS HL5002 RS-502 RSS502 RLS502 H2512 R R2512 H2514 R R H3008 R R308 V is a registered trademark of S ompanies. nerpac is a registered trademark of the ctuant orporation. Power Team is a registered trademark of SPX orporation. Simplex is registered of the ctuant orporation. 100 HL10002 RS-1002 RSS1002 RLS1002 lat ody s H0503 RSM-50 RLS50-5 H0503 kit H1005 RSM-100 RLS100 RS10 10 H1005 kit

91 V ross Reference hart* ompatibility heck Ton V nerpac Power Team Simplex Ton V nerpac Power Team Simplex 20 H2005 RSM-200 RLS200 RS20 H2005 kit H1010 RR-1010 R1010 R1010 H1012 RR H3005 RSM-300 RLS300 RS30 H3005 kit H3008 RR R308 H3014 RR-3014 R2514 R H5006 RSM-500 RLS500S RS50 75 H7506 RSM-750 RLS750S RS H10006 RSM-1000 RLS1000S RS H15006 RSM-1500 RLS1500S RS150 Pull s 2 HP0205 R-25 RP25 RP25 5 HP0505 R-46 RP55 RP55 10 HP1006 R H5506 RR-506 R556 R556 H5513 RR-5013 R5513 R5512 H5520 RR-5020 R5518 R5523 H7506 RR H7513 RR H10006 RR-1006 R1006 R1006 H10013 RR R10013 R10012 Hollow Hole s H1201T RH-120 RH120 R120 H1202T RH-121 RH121 R H1202XT RH-1211 RH121T R1211 H1203XT RH-123 RH123 R123 H2002T RH-202 RH202 R H2006T RH-206 RH206 R206 H3002T RH-302 RH302 R H3006T RH-306 RH306 R306 H6003T RH-603 RH603 R H6006T RH-606 RH606 R H10003T RH-1003 RH1003 R1003 Lock Nut s HLN5502 LL-502 R552L RLN502 HLN5504 LL HLN5506 LL-506 R556L RLN HLN5508 LL HLN5510 LL-5010 R5510L RLN5010 V nerpac Hand Pumps Power Team Simplex P601S P-39 P12 P41 P1201S P-391 P55 - P350 P P1000 P-392 P59 P60 P2001 P-80 P157 P82 P2301 P-80 P159 P140 P4301 P-801 P157 P230 P8701 P-462 P460 P461 P2301M P-84 P157 P230 P8701M P-464 P460 P461 P240L P ir Pumps P600 P-133 P9 - P600H - P9H - P P6 90 P1500L PR-1102N P6R 90R ross-referencing / ngineering 100 HLN5512 LL HLN10002 LL-1002 R1002L RLN1002 HLN10004 LL HLN10006 LL-1006 R1006L RLN1006 HLN10008 LL HLN10010 LL R10010L RLN10010 HLN10012 LL P1500M - P6M - P2000 PT-1102N - - P3801 PT-1105N P P3801L R PR P174 - PR4003 Z4310MX P PR P172 - PR P174 - *or comparison purposes only. Products are not identical. To view complete cross over list go to 91

92 Safety Instructions Industry Safety Standards eneral o not override the factory setting of relief valves. lways use a gauge to check system pressure. Safety Instructions Read and understand all printed materials provided with and on this cylinder o not exceed rated capacities Use only on hard level surface capable of sustaining the load o not connect actuators to pumps with higher pressure ratings lways inspect hoses and connections for damage prior to use Keep hands and feet clear of work area LITIN VI ONLY! Immediately after lifting, support the load with appropriate means Use only manufacturer approved hydraulic fluid flow-restricting component shall not be present between the relief valve and the tank No alterations shall be made to this cylinder ailure to heed these markings may result in injury and/or property damage ach double-acting cylinder shall be fitted with a relief valve on the retract circuit, which bleeds off the smaller effective area of the cylinder s Provide a solid support for the entire cylinder base area. Use cylinder base attachment for more stability. The entire cylinder saddle must be in contact with the load. Movement of the cylinder must be parallel with the movement of the load. o not use cylinder without saddle. This will cause rod to mushroom Saddles distribute load evenly on the rod. s with jacks, never place any part of your body under the load. Load must be on cribbing before venturing under. Jacks lways protect cylinder threads for use with attachments. Keep hydraulic equipment away from open fire and temperatures above 150 (65 ). 80% Rule Provide a level and solid support for the entire jack base area. The entire jack saddle must be in contact with load. Movement of the load must be in the same direction as jack rod. Never place any part of your body under the load. nsure the load is solidly supported before venturing under. Remove the jack handle when not in use. ood industry practice recommends not exceeding 80% of maximum rated capacities. Use only on hard, level surfaces capable of sustaining the load. Immediately after lifting, support the load with appropriate means ailure to heed these warnings may result in personal injury as well as property damage

93 Hydraulic Pump Safety Instructions R N UNRSTN LL WRNINS, INSTRUTIONS N OWNR S MNUL INORMTION OR TTMPTIN TO US THIS QUIPMNT urst hazard exists if hose or connection pressure exceeds rated pressure. o not exceed the rated capacity of this device. Monitor pressure and load at all times. Verify load with calibrated load cell and indicator, accurate pressure gauge or equivalent devices. Inspect hoses and connections for damage prior to use. Never attempt to grasp a leaking pressurized hose. Release the hydraulic pressure before disconnecting hoses or couplers, and before servicing the pump or accessory. Immediately after lifting, support the load with appropriate means. Never rely on hydraulic pressure to support a load. Wear protective clothing and eye protection that meets NSI Z87.1 and OSH standards when operating this equipment. nsure that the chosen application is stable to work on and around. o not subject the pump and its components to shock loads. o not connect to application which can return more oil to the reservoir than the pump reservoir can hold. nsure that the rated pressure of all applications and fittings be equal to or greater than the rated pressure of this pump. Keep hydraulic equipment away from flames and heat. No alterations shall be made to this device. ailure to heed these warnings may result in personal injury as well as property damage. Pumps lectric Pump Safety Instructions TO VOI LTROUTION HZR: Owner/Operator must read, understand and follow all printed material provided with this device before use. onnect ONLY to properly grounded electrical source. onnect to I outlet ONLY! or use in dry locations. void the use of extension cords. If used, extension cord lengths up to 25 ft shall be SJT-14X3 or heavier. or cords up to 50 ft, use SJT-12X3 or heavier. or extension cord lengths up to 100 ft, use SJT-10X3 or heavier. NVR use a 3 prong adapter. o not operate this device in an explosive atmosphere or in the presence of conductive liquids. o not use handle extender. Hand pumps should be easy to operate when used correctly. ill pump only to recommended level. ill only when connected cylinder is fully retracted. Hoses and ouplers lean both coupler parts before connecting. Use dust caps when coupler parts are not connected. lose release valve finger tight. Using force will damage the valve. Use only genuine V hydraulic oil. The wrong fluid can destroy your seals and pump and will render your warranty null and void. etach cylinder only when fully retracted or use shut-off valves or safety valves to lock-in cylinder pressure. on t lift hydraulic equipment by the hoses. ross-referencing / ngineering Keep hoses away from the area beneath loads. o not kink hoses. ending radius should be at least 4½". o not drive over or drop heavy objects on the hoses. 93

94 Maintaining Your quipment nsure a longer life span of your equipment Hydraulic luids Use only ISO 46 V Hydraulic Oil P/N s; 01 (1 gal) or 55 (55 gal) for pumps and cylinders. 100 deg 234 (S.U.S.); deg =53 (S.U.S.); STM rade 215; lash Point 356 deg ; Pour Point -49 deg, PI ravity =30.8. ir Line Lubricants Use lass 1 Turbine Oil (ISO V32) for ir Line Lubricant Hydraulic and Pneumatic iltration Hydraulic fluid must be kept clean, cool and free of water. Use Hydraulic iltration to provide fluid which meets ISO 17/15/12 cleanliness levels. ir Line iltration for solid particulate contamination removal: Use V P/N; RL-145, 5uM Pneumatic ilter. ir Line Water Removal; Use V P/N; -145, mbient ryer. Proper Operation of quipment Refer to individual Product Owner s Manuals and V atalogs for; general information, specifications, safety, set up, operation, maintenance, trouble shooting, storage and warnings for all V products. ormulas Weight: Key to Measurements Length Rod Speed ormula V = 60 Q ffective rea (in 2 ) 60 (sec) Rod Speed (sec/in) = Pump low Rate (in 3 /min) 1 1 pound (lb.) = kg 1 in =25.4 mm 1 kg =2.205 lbs 1 mm =0.039 in orce ormula = P orce (lbs) = Hydraulic Working Pressure (lb/in 2 ) ffective rea (in 2 ) 1 ton (short, US) =2,000 lbs 1 in² =6.452 cm² 1 ton (metric) =2,205 lbs 1 cm² =0.155 in² Volume: Pressure: 1 in³ = cm³ 1 psi (lb/in²) =0.69 bar 1 cm³ =0.061 in³ 1 bar =14.5 psi Oil apacity ormula = L Oil apacity (in 3 ) = ffective rea (in 2 ) Stroke ¼ Hose Oil apacity ormula = H Oil apacity (in 3 ) = Length of Hose (ft) 1 liter =61.02 in³ 1 kpa =0.145 psi =0.264 gal(us) ⅜ Hose Oil apacity ormula = H Oil apacity (in 3 ) = Length of Hose (ft) =3.785 liter Temperature: ffective rea 1 gal (US, liquid) =231 in³ 0 =(0 x 1.8) + 32 =3,785 cm³ 0 =(0-32) 1.8 ormula = 4 ffective rea = 2 = ( ore iameter)

95 Index s H 6 HU 16 HL 26 HULN 32 H 36 HP 41 HU 10 H 18 H 28 HLN 33 H 38 HT 42 H 12 H 22 HLN 30 ccessories 34 HU/HU 40 HP 43 Pages 6-43 Pumps P P Single cting Hand Pumps ouble cting Hand Pumps PR Rotary ir 49 Pumps P ll Position 50 ir Pumps P ouble cting 50 ir Pumps P 1-Phase 52 lectric Pumps P as ngine 60 Pumps P iesel ngine 60 Pumps P57 oot Pumps 48 P Single cting 50 ir Pumps P 3-Phase 56 lectric Pumps PU Universal Motor 63 Pumps Pages ombo Kits H eneral Purpose ombinations 64 HL Low Profile ombinations 65 H lat ody ombinations 64 HLN Lock Nut ombinations 65 H Hollow Hole ombinations 65 HU luminum ombinations 65 Pages ontrol Valves & ccessories low ontrol Valves 66 auge dapters 69 Solenoid Valves 70 Wireless ontroller 71 Pressure Switch 72 irectional ontrol Valves 74 Manifolds 68 Hydraulic Oil 70 Hydraulic ouplers 71 xternal Pressure dj 71 Hydraulic Hoses 72 ittings 75 Pressure auges 69 oupler ust over 70 oot Pedals 71 Manifold locks 72 Pump Mounted Valves 73 Pages Presses/Tools Movable Head Shop Presses ixed Head Shop Presses Shop Press ccessories 77 Shop Press uards lange Spreaders uck ill Spreaders Oil ield Valve Seat Pullers luminum w/ ase/needle Valve 82 Hydraulic ear Pullers Mechanical ear Pullers 81 Hydraulic ench Vise 82 Nut Splitters Pages Maintenance Kits/ottle Jacks Maintenance Kits/Rail s 85 Manual ottle Jacks 88 Mini Jacks 89 Lifting ags 86 ir/manual ottle Jacks 88 OMNI ll-position Jacks 89 Lifting ag ccessories 87 Toe Jacks 88 Orbital Jacks 89 Pages ross-reference & ngineering V ross Reference hart 90 Maintaining Your quipment 94 Hydralic ormula Reference 91 Maintaining Your quipment 94 Safety Instructions 92 Pages opyright 2016 S ompanies ll rights reserved. ny copying or other use of the material in this catalog (text, illustrations, drawings, photos) without prior express written consent is prohibited. Information in this catalog is subject to change without prior notice. 95

96 s ontact Information Pages 6-43 Pumps United States of merica Shinn u ompany of merica ddress: N. Pomona ve. Kansas ity, MO Tel: ax: mail: sales@bvahydraulics.com Pages ombo Kits lobal Locations anada urope Shinn u ompany of anada Shinn u ompany of urope Pages ontrol Valves & ccessories ddress: Tel: ax: 6355 Shawson r. Unit 1 Mississauga, Ontario L5T 1S7 anada mail: sales@shinnfucanada.ca ddress: Tel: ax: mail: Tussenrimer 20, 4704 SR Roosendaal, The Netherlands sales@sfeu.nl Pages Presses/Tools ustralia Shinn u ompany of ustralia ddress: Tel: ax: mail: 15 Viewtech Place Rowville, Victoria 3178, ustralia sales@bvaonline.com.au Taiwan Shinn u orporation Headquarters ddress: Tel: ax: mail: 7., No.408 Ruei aung Rd Nei Hu isctrict Taipei ity 114 Tiawan R.O sales@shinnfu.com Pages Maintenance Kits/ottle Jacks Pages ross-reference & ngineering Pages atalog ownload Scan this QR code with your phone to download our catalog OR Visit our website V is a division of