Enerpac Hydraulic Tools

Size: px

Start display at page:

Download "Enerpac Hydraulic Tools"

Joel Carpenter
5 years ago
Views:

Featuring maintenance sets, machine lifts and load skates, as well as hole punches, pipe benders and cable cutters, Enerpac has the tools to ensure that even your most demanding applications can be

1 Enerpac Hydraulic Tools Enerpac offers an extensive range of dedicated tools for a variety of specific and flexible applications. Whatever your requirement cutting, punching, spreading or bending you can be sure that Enerpac has the correct tool to do your job safely and efficiently. Featuring maintenance sets, machine lifts and load skates, as well as hole punches, pipe benders and cable cutters, Enerpac has the tools to ensure that even your most demanding applications can be undertaken with the highest degree of safety and accuracy. Tool-Pump Sets Most hydraulic tools in this section are available in sets, for a perfect toolpump match. Hydraulic System Set-up heck out our Yellow Pages section for help on system setups and valving configurations. 2 olting Tools More Enerpac Tools you will find in our olting Tools section in this catalogue

2 Hydraulic Tools Section Overview apacity (kn) Tool type and functions Page - 1 (22-1) Maintenance Sets MS (1-498) Punch Punch-Pump Sets MSP SP STP 2 4 (157) Lifting Wedge LW 6 8,5-20 (75-178) Machine Lifts SOH (8,9-712) Heavy-uty Load Skates ER ES ELP litres Industrial Storage ases M 170 0,75-1,0 (6-8,9) Hydraulic Wedgie Spread ylinders WR (26-178) Hydraulic utterheads utterhead-pump Sets WH WHR ST (26-178) Self-ontained Hydraulic utters WM 173 Nominal ore ½ - 4 inch Pipe ender Sets ST

MS-, Maintenance Sets Shown: MS2-10 The Universal Hydraulic Tool ox Maintenance Sets Enerpac Maintenance sets are a complete assortment of hydraulic powered tools.

3 MS-, Maintenance Sets Shown: MS2-10 The Universal Hydraulic Tool ox Maintenance Sets Enerpac Maintenance sets are a complete assortment of hydraulic powered tools. Using these sets allows you to quickly configure a unique tool to meet your most difficult jobs. uilt around the Enerpac lightweight hand pump, hose and cylinder, these sets enable you to push, pull, lift, press, straighten, spread and clamp with forces up to 1. ll sets include Enerpac pump, hose, cylinder and gauge Lock-on or threaded connectors omplete maintenance set for almost every maintenance application. More Information For detailed information on all included attachments, see the next pages. 0 QUIK SELETION HRT apacity using attachments* Set of ttachment omponents (kn) (22) (22) () () 1 (1) -1 (-1) 158 MS2-4 MSFP-5 MSFP-10 MS2-10 MS2-20 MS P-142 P-142 P-392 P-392 P-392 P-392 H-7206 H-7206 H-7206 H-7206 H-7206 H-7206 R-55 R-55 R-106 R-106 R-256 R-102, -106, -256 GP-10S G2535L G2535L GP-10S GP-10S GP-10S * If no attachments are being used, capacity is double these values. Maximum operating pressure is then 700 bar. G-4 G-3 G-3 G-2 G-2 G

Universal Maintenance Sets UTION! When cylinders are used with maintenance set attach ments or components, the maximum system pressure must be limited to half the rated pressure (3 bar).

MS apacity (using attachments): - 1 Maximum Operating Pressure: 3 bar 15 Rubber Flex Head 27 127 mm Extension Tube Pipe oupling 1 Threaded adaptor 2 ase ttachment 4 Flat ase, attached to the ase

4 Universal Maintenance Sets UTION! When cylinders are used with maintenance set attach ments or components, the maximum system pressure must be limited to half the rated pressure (3 bar). PPLITION EXMPLES WRNING! Only use attachments provided with set. Non-Enerpac attachments and longer extension tubes will reduce column strength, potentially creating unsafe conditions. MS apacity (using attachments): - 1 Maximum Operating Pressure: 3 bar 15 Rubber Flex Head mm Extension Tube Pipe oupling 1 Threaded adaptor 2 ase ttachment 4 Flat ase, attached to the ase ttachment using a Threaded onnector mm Extension Tube Lock-on Lock Pin 21 Smooth Saddle 11 attached to the plunger using a Threaded daptor 1ii 21 Lock Pins 8 ollar lamp Head mm Extension Tube 18 hain with Hook onnector Single hain Plate mm Extension Tube 21 Lock Pin 6 Lock-on lamp Toe 10 Serrated Saddle, attached to the Plunger using a Threaded daptor 1i 3 ollar Toe ouble hain Plate 17 attached to the plunger using a Threaded daptor 1ii 17 ouble hain Plate, attached to the ase ttachment 2 using a Threaded daptor 5 1i Threaded adaptor 4 Flat ase 18 hain with Hook 159

5 MS-, Maintenance Sets UTION! When cylinders are used with maintenance set attachments or components, the maximum system pressure must be limited to half the rated pressure (3 bar). ase, ollar and Plunger ttachments Threaded daptor Set ase, ollar and Plunger ttachments ylinder (s) hains and ttachments for Pulling pplications Extension Tubes, onnectors and daptors Note: ll dimensions in millimetres. MS2-4 MSFP-5 MSFP-10 MS2-10 MS2-20 MS R MZ MZ R MZ R R (2x) -557 (2x) -141 (2x) R (2x) 1 R-102, 106, , , , , (2x) , (2x) -141 (2x), -18 (2x) ¾ - un 1-8 un 1½ - un ase ttachment ollar Toe Flat ase ¾"- 14 npt 1¼"- 11½ npt 2"- 11½ npt ½"- un 2¼"- 14 un 3 5 / "- 12 un ¾ - 14 npt 1¼ - 11½ npt 2-11½ npt Length Ø 4 mm 762 Storage ase Set Weight -544 WR-5 MZ-4013 (4x) MZ-4007 (3x) MZ-4008 (2x) MZ MZ-4002 MZ-4003 MZ-4004 MZ-4005 (2x) MZ-4006 (2x) M-6 26 WR-5 MZ-4013 (4x) MZ-4007 (3x) MZ-4009 MZ-4002 MZ-4003 MZ-4004 MZ-4005 (2x) MZ-4006 (2x) M-6 20 WR-5 - (4x) MZ-10 (2x) MZ-1052 MZ-1002 MZ-1003 MZ-1004 MZ-1005 W (2x) (4x) MZ-10 (2x) MZ-1051 MZ MZ-1002 MZ-1003 MZ-1004 MZ-1005 W (2x) W (2x) -242 (2x) (4x) MZ-10 (3x) MZ-1051 (2x) MZ MZ-1002 MZ MZ-1004 (2x) -240 MZ-1005 (2x) -241 MK MZ * ¾"- 14 npt 1¼"- 11½ npt 2"- 11½ npt * -243 is a round base model. Threaded onnector ¾"- 14 npt 1¼"- 11½ npt Lock-on lamp Toe

6 Universal Maintenance Sets, MS- Threaded Plunger Toe Wedge Head Spreader ¾"- 14 npt 1¼"- 11½ npt ¾"- 14 npt ,0 WR ¼"- 11½ npt ,0-92 2¼"-14 un , ollar lamp Head Rubber Flex Head Lock Pin MZ Spreader Toe ¾"-14 npt ½"- un 2¼"-14 un ¾"-14 npt 1¼"-11½ npt hains and ttachments for Pulling MZ Lock-on onnector Single hain Plate ¼"-11½ npt Serrated Saddle ½"- un 2¼"-14 un 3 5 / "-12 un MZ-4007 MZ Male Lock-on daptor ouble hain Plate ¾"- 14 npt 1¼"- 11½ npt MZ-4008 MZ-1051 ¾"-14 npt 1¼"-11½ npt Smooth Saddle -5 1¼"-11½ npt Female Lock-on daptor hain with Hook ¼"- 11½ npt 90 V-ase hain Length 1,5 metres 1,8 metres 2,4 metres MZ-4009 MZ-1052 ¾"-14 npt 1¼"-11½ npt djustable Extension ¾"- 14 npt 1¼"- 11½ npt Tubes, onnectors and daptors Pipe oupling ¼"-11½ npt Plunger ase Slip-on Extension "-11½ npt ¾"- 14 npt 1¼"- 11½ npt 2"-11½ npt ¾"- 14 npt

SP-, Lightweight Hydraulic Punch Shown: SP-35S Much Faster than rilling Tool Kit SPK-10 Included with all 35 Ton punches, this tool kit is used to remove and install the punch into the head.

mm thick capacity through mild steel Round, oblong and square punches and dies are available to solve your punching applications Long life Enerpac single-acting, spring return design urable steel

7 SP-, Lightweight Hydraulic Punch Shown: SP-35S Much Faster than rilling Tool Kit SPK-10 Included with all 35 Ton punches, this tool kit is used to remove and install the punch into the head. an be ordered as a replacement under model number SPK-10. mm thick capacity through mild steel Round, oblong and square punches and dies are available to solve your punching applications Long life Enerpac single-acting, spring return design urable steel case keeps tools and dies together and provides for easy carrying and storage R-400 coupler included. Ordering Information The 35 hydraulic Punch may be ordered by itself or as a set, including a pump. punch or die may also be ordered separately or as a matched set. Please refer to the Quick Selection hart information on top of the next page. STNR PUNHES N IES SELETION HRT Hole Shape Imperial 1) (inch) Metric 1) Hole Size olt Size Hole Size olt Size SP-, Lightweight Hydraulic Punch Much Faster than rilling. 0, 0,38 0,44 0,53 0,56 0,69 0,78 0,81 0, 0,38 0,44 0,. x x x.75. x.75 1/4 5/ 3/8 7/ 1/2 5/8 3/4 1/4 5/ 3/8 7/ 1/4 5/ 3/8 7/ 9,5 11,1 13,5 14,3 17,5,8 20,6 9,5 11,1 x 9,5 x 11,1 x x M8 M10 M12 M M18 M8 M10 M12 M8 M10 M12 1) Material thickness should not exceed hole diameter 2

Single-cting, Spring Return Hydraulic Punch QUIK SELETION HRT * Punch & ie Set Pump Included Hose Gauge Gauge daptor MSP SP STP SP-35 SP-35 SP-35 SP-35 SP-35 SP-35 SP-35 Standard** Standard**

8 Single-cting, Spring Return Hydraulic Punch QUIK SELETION HRT * Punch & ie Set Pump Included Hose Gauge Gauge daptor MSP SP STP SP-35 SP-35 SP-35 SP-35 SP-35 SP-35 SP-35 Standard** Standard** Standard** Standard** Metric*** Metric*** P-392 PTG-1102N PU-1100E PU-1100E H-7206 H-7206 H-7206 H-7206 GP-10S GP-10S G-2 G-2 STP-35H STP-35 SP-35 SP-35S SP-35SPE MSP-351 MSP-351PE apacity: 35 Hole Sizes: - 20,6 mm * Punch oil capacity: 76 cm 3 Includes the following punch and die sets: ** SP-438, SP-688, SP-563 and SP-813 *** SP-375, SP-5, SP-438 and SP-688 Maximum Operating Pressure: 700 bar UTION! The chart below is for reference only! Maximum allowable material thickness to be punched varies with set wear. UTION! Material thickness should not exceed hole diameter. Standard Punch & ie Set Maximum allowable material thickness to be punched Material thickness should not exceed hole diameter 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) SP-3 SP-375 SP-438 SP-5 SP-563 SP-688 SP-781 SP-813 SP-458 SP-549 SP-639 SP-728 SP-106 SP-125 SP-188 SP-2 10,2 3,3 3,3 3,3 10,2 10,2 9,9 10,2 8,6 Steel Qualities (see table): 1) Mild -7 2) oiler Plate 3) Structural -36 4) Struct orten (STM 242) 5) old Rolled ) Hot Rolled -10 7) Hot Rolled ) Hot Rolled nnealed 9) Stainless nnealed 10) Stainless 304 Hot Rolled 11) Stainless 6 old Rolled 3

SP-, Ton Hydraulic Punch Shown: SP-100 uts the Time Spent Forming Holes epth Stop For simplified repetitive punching applications an adjustable epth

vailable as a complete set including electric pump and hoses ouble-acting cylinder design for fast cycle times Punch and die changeover tools included

Foot Mounting Kit foot mounting kit for easy mounting of the punch to workbench or fixture is available. Order model number: SP-120.

9 SP-, Ton Hydraulic Punch Shown: SP-100 uts the Time Spent Forming Holes epth Stop For simplified repetitive punching applications an adjustable epth Stop is available.order model number: SP-110. vailable as a complete set including electric pump and hoses ouble-acting cylinder design for fast cycle times Punch and die changeover tools included Lifting bracket included djustable power stripper prevents movement of the metal during stripping R-400 female couplers included. Foot Mounting Kit foot mounting kit for easy mounting of the punch to workbench or fixture is available. Order model number: SP-120. Ordering Information The - Hydraulic Punch may be ordered by itself or as a set with an electric pump. punch and die may be ordered as a matched set. Please refer to the selection chart information. Shown below is the punch with SP-120 and SP-110 assembled. Save time using the - Enerpac Punch. 4

Ton ouble-cting Hydraulic Punch QUIK SELETION HRT PUNH SETS Punch* Punch & ie Sets Included Electric Pump Hydraulic Hose (2x) Set SP SP- SP- ll** ll** ZE4410SE * Punch Oil apacity: dvance: 278 cm 3

10 Ton ouble-cting Hydraulic Punch QUIK SELETION HRT PUNH SETS Punch* Punch & ie Sets Included Electric Pump Hydraulic Hose (2x) Set SP SP- SP- ll** ll** ZE4410SE * Punch Oil apacity: dvance: 278 cm 3 Retract: 229 cm 3 ** ll standard sets from chart below. H-7206 SP-100 SP apacity: (490 kn) Hole Sizes: 13,5-26,2 mm Maximum Operating Pressure: 700 bar UTION! Material thickness should not exceed hole diameter. SP-110 SP-120 UTION! hart below is for reference only! Maximum allowable material thickness to be punched varies with set wear. SP- STNR PUNH N IE SELETION HRT Hole Shape Hole Size olt Size s Standard Punch and ie Set Steel Qualities (see table below): 1) Mild -7 2) oiler Plate 3) Structural -36 4) Struct orten (STM 242) 5) old Rolled ) Hot Rolled -10 7) Hot Rolled ) Hot Rolled nnealed 9) Stainless nnealed 10) Stainless 304 Hot Rolled 11) Stainless 6 old Rolled Maximum llowable Material Thickness To e Punched 13,5,7,8 23,1 26,2 M12 M M18 M20 M24 SP-1 SP-170 SP-0 SP-121 SP-123 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 13,5 14,2 14,2 13,5 14,2 14,2 13,5 14,2 14,2 13,5 13,5 14,2 14,2 12,4 13,0 12,4 8,9 8,1 8,1 8,1 5,6 10,2 10,2 10,2 8,9 12,4 13,0 12,4 8,9 12,4 13,0 8,9 12,4 13,0 12,4 8,9 5

Hydraulic Vertical Lifting Wedge LW- with S-2 and optional LW-1 LW Maximum Lifting Force: (157 kn) Lifting Stroke: 21 mm Tip learance / Maximum Spread*: 10 mm / 81,5 mm Maximum Operating Pressure:

62 Requires very small access gap of only 10 mm Lifting force at 700 bar hydraulic pressure Each step can spread under full load Straight vertical lifting Unique interlocking wedge design: no first

11 Hydraulic Vertical Lifting Wedge LW- with S-2 and optional LW-1 LW Maximum Lifting Force: (157 kn) Lifting Stroke: 21 mm Tip learance / Maximum Spread*: 10 mm / 81,5 mm Maximum Operating Pressure: 700 bar est Match Hand Pump To power your Enerpac Machine Lift, the Enerpac P-392 hand pump is an ideal choice. 62 Requires very small access gap of only 10 mm Lifting force at 700 bar hydraulic pressure Each step can spread under full load Straight vertical lifting Unique interlocking wedge design: no first step bending and risk of slipping out Single-acting, spring return cylinder Lifting wedge LW- includes safety block S-2 Includes R- ylinder with R-400 coupler. ontrol Manifolds ontrol Manifold to control two or four lifting wedges simultaneously. M-21 with 3 ports 3/8" NPTF M-41 with 5 ports 3/8" NPTF. 120 For lifting heavy equipment with minimum floor clearance the LW- is the ideal tool. LW-1 ollapsed Height Extended Height 6 Maximum Lifting Force (kn) Lifting Stroke Tip learance (157) 21 LW ,0 Use optional stepped block LW-1 to increase wedge lifting height by 30 mm. * Using LW-1. Maximum Operating Pressure (bar) Oil apacity (cm 3 )

SOH-10-6 Hydraulic Machine Lifts SOH Lifting apacity: 8,5-20 Stroke: 136-157 mm Toe learance: 20 mm Maximum Operating Pressure: 700 bar RSM Flat-Jac Low height, single acting spring-return cylinders

22 For lifting heavy equipment with minimum available access Remote hydraulic pump enhances safety Low height lifting toe Precision guided to reduce friction and isolate cylinder from side-loads Two

12 SOH-10-6 Hydraulic Machine Lifts SOH Lifting apacity: 8,5-20 Stroke: mm Toe learance: 20 mm Maximum Operating Pressure: 700 bar RSM Flat-Jac Low height, single acting spring-return cylinders are ideal for space restricted applications. 22 For lifting heavy equipment with minimum available access Remote hydraulic pump enhances safety Low height lifting toe Precision guided to reduce friction and isolate cylinder from side-loads Two extendable support feet provide extra stability Includes R- UO ylinder with R-400 coupler. Load Skates In combination with the Enerpac Machine Lifts we recommend Load Skates for moving heavy loads. Limited access under this machine makes the Enerpac hydraulic machine lift the perfect solution. 8 apacity (kn) 8,5 (75) 20 (178) Toe learance Stroke Oil imensions apacity Total ody Minimum entral Maximum Height (cm 3 ) H J K SOH-10-6 SOH Total Ext. Height F

Heavy uty aterroller Load Skates Shown: Set ERS-20 Move Heavy Loads Easily and Safely Sets (see table) include all components necessary to handle a variety of applications.

13 Heavy uty aterroller Load Skates Shown: Set ERS-20 Move Heavy Loads Easily and Safely Sets (see table) include all components necessary to handle a variety of applications. Two EL-1 link-up bars, two ERH-1 handles (880 mm long) and one EM-1 metal box are included. Optional long handle ERH-2 (1295 mm) available for 60 and 80 only. Rugged and sturdy construction for long life Low profile construction for increased stability Low rolling-resistance allows for easy transportation ttachable load leveling plates and swivel turntables for turning corners. Lifting Wedge and Machine Lifts To place the Load Skates, the load must first be lifted. This can be done easily and safely using the Enerpac Lifting Wedge or Machine Lifts. 6 Load Skates may be ordered separately or as a matched set. Set apacity * Set Load Skates (4x) Turntable Swivels (2x) Leveling Plates (2x) Weight including handles and metal box (kn) 20 (178) 30 (267) 60 (533) ERS-20 ERS-30 ERS-60 ER-10 ER-15 ER-30 ES-10 ES-15 ES-30 ELP-10 ELP-15 ELP-30 * Sets are designed to enable two skates to take full load for extra safety on uneven floor surfaces Heavy transport using Load Skates. The machine is first lifted, using SOH- Enerpac Machine Lifts. 8

Heavy uty aterroller Load Skates ER-1, ER-10, ER-15, ER-30 EL ER ES Maximum arrying apacity: 80 (711 kn) ER-60, ER-80 hemical tank transportation: The first few centimetres the load was lifted with

14 Heavy uty aterroller Load Skates ER-1, ER-10, ER-15, ER-30 EL ER ES Maximum arrying apacity: 80 (711 kn) ER-60, ER-80 hemical tank transportation: The first few centimetres the load was lifted with RS- low height cylinders and then moved on to load skates for transportation. Turntable Swivel ES-1, ES-10, ES-15, ES-30 Turntable Swivel ES-60, ES-80 Leveling Plate ELP-10, ELP-15, ELP-30 Leveling Plate ELP-60, ELP-80 Load Skates Turntable Swivel Leveling Plate apacity (kn) (8,9) (89) (133) (267) (533) (711) (8,9) (89) (133) (267) (533) (711) (89) (133) (267) (533) (711) ER-1 ER-10 ER-15 ER-30 ER-60 ER-80 ES-1 ES-10 ES-15 ES-30 ES-60 ES-80 ELP-10 ELP-15 ELP-30 ELP-60 ELP-80 E F imensions ontact Rolls per Skate Rollers per Skate ,8 5,2 7,3 13,0,9 60,9 1,1 3,7 3,7 5,3 13,7 18,9 3,7 3,7 5,3 13,8 18,8 9

Industrial Storage ases M- M ase Size: - 453 litres Protect your Equipment Protect your equipment from dust, water, grease and dirt Reduce losses on the jobsite, maintenance area or shop urable

Maintenance Sets Enerpac Maintenance sets are a complete assortment of hydraulic powered tools. Using these sets allows you to quickly configure a unique tool to meet your most difficult jobs.

15 Industrial Storage ases M- M ase Size: litres Protect your Equipment Protect your equipment from dust, water, grease and dirt Reduce losses on the jobsite, maintenance area or shop urable steel, painted with rust-resistant primer and finished in durable enamel Heavy duty hinges and lifting handles Lockable. Maintenance Sets Enerpac Maintenance sets are a complete assortment of hydraulic powered tools. Using these sets allows you to quickly configure a unique tool to meet your most difficult jobs. uilt around the Enerpac lightweight hand pump, hose and cylinder, these sets enable you to push, pull, lift, press, straighten, spread and clamp with forces up to when not storing the lifting system, this heavy-duty storage case doubles as a work station. Hydraulic Pullers These hydraulic pullers eliminate time-consuming and unsafe hammering, heating or prying. amage to parts is minimized through the use of controlled hydraulic power. 145 ase Size imensions L x W x H Thickness (litres) M-6 M-1 M-4 M-7 M- 597 x 178 x x 292 x x 457 x x 381 x x 609 x 609 0,9 0,9 1,5 1,9 1,

Hydraulic Wedgie and Spread ylinders Shown clockwise from top: WR-15, WR-5, -92 WR apacity: 0,75-1,0 Tip learance: 12,8-35 mm Maximum Spread: 94-292 mm Maximum Operating Pressure: 700 bar WR-5: For

R- ylinders 10 R- UO cylinders (except R-101) fit into -92 Spreader ttachment. est Match Hand Pump To power your WR-5 and WR-15 the P-392 hand pump is an ideal choice.

16 Hydraulic Wedgie and Spread ylinders Shown clockwise from top: WR-15, WR-5, -92 WR apacity: 0,75-1,0 Tip learance: 12,8-35 mm Maximum Spread: mm Maximum Operating Pressure: 700 bar WR-5: For use in very confined work areas WR-15: For long stroke spreading applications Single-acting, spring return -92: Spreader attachment; threads on 10 R- UO cylinders (except R-101). R- ylinders 10 R- UO cylinders (except R-101) fit into -92 Spreader ttachment. est Match Hand Pump To power your WR-5 and WR-15 the P-392 hand pump is an ideal choice. Use Enerpac H700- (page 1) for hydraulic connection WR-5 WR-5 wedgie cylinder is used to position a concrete block on a construction site. WR ylinder apacity (kn) Tip learance Maximum Spread ylinder Effective rea (cm 2 ) Oil apacity (cm 3 ) 1,0 (8,9) 0,75 (6) 1,0 (8,9) 12,8 32,0 3 WR-5 WR ,5 14, ,3 11,3 3,

Hydraulic utterheads Shown from left to right: WH-4000, WH-7 WH, WHR, ST apacity: 3-20 utting apacity: ø 12-101 mm Maximum Operating Pressure: 700 bar Tool-Pump Sets utterheads marked with an * are

Single-acting, spring return on all models, except WHR-12 Guillotine action for easy operation Lifting handles on larger models for easy transport arrying bag included for easy carrying and tool

17 Hydraulic utterheads Shown from left to right: WH-4000, WH-7 WH, WHR, ST apacity: 3-20 utting apacity: ø mm Maximum Operating Pressure: 700 bar Tool-Pump Sets utterheads marked with an * are available as sets (pump, tool, gauge, couplers and hose) for your ordering convenience. Single-acting, spring return on all models, except WHR-12 Guillotine action for easy operation Lifting handles on larger models for easy transport arrying bag included for easy carrying and tool protection Ideal for use with most Enerpac pumps featuring 3-way valve or dump valve and 700 bar pressure rating (except WHR-12, which requires 4-way valve) R-400 coupler and dust cap included on all models. utterhead WH-7 WH-7 WH-7 WH-12 WH-12 WH-12 Pump P-392 P-392FP PTG-1102N P-392 P-392FP PTG-1102N Set ST-7H ST-7FP ST-7 ST-12H ST-12FP ST-12 Steel rope is easily cut with the smooth guillotine action of an Enerpac cutterhead. utter Head Operation apacity Oil apacity Length Steel Rope, Hempcore or IWR opper or ar Round ar Strand able luminium or ar Soft Steel olts Reinforcing ar are opper Strands are luminium Strands SR Guy Steel Strands Telephone able PP Underground able (Power) Replacement lades (cm 3 ) 6x7 6x12 6x 6x7 1x7 1x Single- cting bl.-ct WH-7* WH-12* WH-2000 WH-3380 WH-4000 WHR ,4 1,6 65,5 137,7 122, * vailable in sets with P-392 Hand Pump, P-392FP Foot Pump or PTG-1102N Turbo ir Pump. Will not cut designated material ,2 W-7 11,3 W-12 10,4 W ,1 W ,5 W ,8 W-12

Shown from left to right: WM-2000, WM-7 Self-ontained Hydraulic utters WM apacity: 3-20 utting apacity: ø 14-85 mm Maximum Operating Pressure: 700 bar Replacement lades 60-62HRc hardened replacement

Rotating heads for operator convenience Guillotine action for easy operation arrying bag included for easy carrying and tool protection Velcro straps to secure handles on larger models for easy carry

18 Shown from left to right: WM-2000, WM-7 Self-ontained Hydraulic utters WM apacity: 3-20 utting apacity: ø mm Maximum Operating Pressure: 700 bar Replacement lades 60-62HRc hardened replacement blades. Rotating heads for operator convenience Guillotine action for easy operation arrying bag included for easy carrying and tool protection Velcro straps to secure handles on larger models for easy carry Spring return for easy operation Light weight self-contained tool, can be used anywhere. For utter WM-580 WM-7 WM-1000 WM-12 WM-1580 WM-2000 WM Order lades W-580 W-7 W-1000 W-12 W-1580 W-2000 W-3380 UTION!: in the charts on these pages means that this hydraulic cutter is not design ed to cut this size or type of material. ny attempt to do so may result in personal injury and damage to the unit and will void the warranty. Selection hart Maximum utting apacities (ø in mm) apacity Length Steel Rope, Hempcore or IWR opper or ar Round ar Strand able luminium or ar Soft Steel olts Reinforcing ar are opper Strands are luminium Strands SR Strands Guy Steel Strands Guy Steel Strands Telephone able PP Underground able (Power) WM-580 WM-7 WM-1000* WM-12 WM-1580 WM-2000 WM x7 6x12 6x * uts 12 mm alloy chain grade 70 (type G7 transport or tie-down) or grade 80 (for overhead lifting applications) Will not cut designated material x x x ,6 3,6 11,3 10,4 6,8 10,9 10,0 173

19 ST-, Pipe ender Sets Shown: ST-101H Quick, Safe and Wrinkle-free ending One Shot and Sweep One shot shoes give up to a 90 bend without resetting. Sweep shoes are used where increasing radii are required for multiple parallel pipe installations. Makes smooth, wrinkle-free bends Sets include genuine Enerpac cylinder, hose and manual, air or electric pump Sets are also available without hydraulics ending shoes and bending frame are lightweight, heattreated aluminium ll sets include sturdy steel storage case ll sets include Z angle indicator for accurate bending Z Shoe Lock Pin included in every set Eject-O-Matic benders (ST-202 models) have doubleacting cylinder to eject pipe from the bending shoe. Typical one shot bending operation. SELETION HRT Pipe Range Nominal Size (inch) ender Set Hand Pump * ir Pump * Electric Pump * ylinder * Hose * Saddle * 174 One Shot ½ ¼ - 4 Sweep 2½ - 4 ST-101X ST-101N ST-101H ST-101 ST-101E ST-221X ST-221N ST-221H ST-202X 1) ST-202N 1) ST-202E 1) P-392 P-80 PTG-1102N PUJ-1200E 2) ZU4408SE 2) R-1010 R-1010 R-1010 R-1010 R-2510 R-2510 RR-3014 RR H-7206 H-7206 H-7206 H H-7206 H H-7206 (2x) H-7206 (2x) * See corresponding sections in this catalog for more detailed specifications. 1) Eject-O-Matic 2) For 115 volt applications replace the last digit of Set and pump from E to

20 Pipe ender Sets Nominal Pipe Size (inch) Wall Thickness Schedule Pipe * Pipe end Inside Radius (inch) ST-101 ø ½ - 2 One Shot ST-221 ø 1-2 One Shot ø 2¼ - 4 Sweep ST-202 ø 1¼ - 4 One Shot One Shot ending Shoe Sweep ending Shoe ST 2,8 40 ½ 3,7 80 2⅞ 4,7 0 Z ,5 2,9 EH 40 ¾ 3, ,5 0 Z ,8 3,4 EH ,5 80 5⅛ 0 Z-120 9,1 3,6 EH 40 1¼ 4, / Z ,7 3,7 EH 40 1½ 5,1 80 7, / Z ½ 10,2 3,9 5,5 8,7 5,2 7,0 9,5 EH / 9½ Z Z ½ 4 5, ¼ 7,6 80 5, ½ 8,1 80 6, ¾ 8,6 80 Z Z Z *Schedule Pipe: 40 = Standard; 80 = Extra Heavy; 0 = ouble Extra Heavy; EH = ouble Extra Heavy (slightly thicker than 0); = an be bent using wider spacing for swivel shoes. Z Z Z Z Nominal Pipe Size: ½ - 4 inch Maximum ending: 90 Maximum Operating Pressure: 700 bar Frame ssembly Pivot Pins (2x) Pivot Shoes (2x) ending Shoes included (Shoes with 3) are Sweep, all other shoes are One Shot) ender Set Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z-120 Z Z Z Z Z Z Z ) Z Z Z ) Z Z ) Z Z ) Z ST-101X ST-101N ST-101H ST-101 ST-101E ST-221X ST-221N ST-221H ST-202X 1) ST-202N 1) ST-202E 1) 175

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder. R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable