Lifting Gear Hire Jacking

Size: px
Start display at page:

Download "Lifting Gear Hire Jacking"

Transcription

1 Lifting Gear Hire Jacking All rental equipment is available throughout North America. For specific product information, refer to the group of equipment within this section s overview on the following page for that product s corresponding page number. Rentals@RentLGH.com Jacking Equipment Lifting Gear Hire stocks a complete range of equipment for virtually any lifting or moving application. Some of the industries we serve: Energy Utilities Construction Maintenance Transportation Marine/Ship Building Petrochemical Pharmaceutical 134

2 Jacking Section Overview Jacking Types Manufacturer(s) Pages Reel Jacks, Ratchet Jacks, Superjacks Simplex Air Bags Mat Jack 139 Hydraulic s Ton Single-Acting, Spring Return Hydraulic s Ton Single-Acting, Spring Return, Low-Profile Hydraulic s Ton Single-Acting, Load Return, Pancake Lock Nut Hydraulic s 50 1,000 Ton Single-Acting, Load Return, Lock Nut Hydraulic s Ton Double-Acting, Center Hole Hydraulic s Ton Double-Acting Hydraulic s Ton Double-Acting Hydraulic s Ton Single-Acting, Load Return Hydraulic s Ton Single-Acting, Load Return Enerpac 140 Simplex Enerpac 141 Simplex 154 Enerpac 142 Enerpac 143 Enerpac 144 Enerpac 145 Enerpac 146 Enerpac 147 Enerpac 148 Hydraulic s Enerpac Ton Single-Acting, Spring Return, Center Hole Simplex 157 Hydraulic s Ton Single-Acting, Spring Return, Low-Profile Simplex 153 Hydraulic s 10 1,000 Ton Double-Acting Simplex 155 Hydraulic s 30 1,000 Ton Single-Acting, Load Return, Lock Nut Simplex 156 Hydraulic s 30 1,000 Ton Single-Acting, Load Return Simplex 158 Hand Pumps, Gas Pumps, Electric Pumps Simplex, Enerpac Accessories Simplex Spreader Jacks, Toe Jacks Simplex, Tangye Hydra-Pac Synchronous Pump & Heavy Track Skidding System Hydra-Slide Sync Lift Enerpac Jacking Equipment 135

3 Mechanical Jacks 5 20 Ton Reel Jack 321B Using A1029-R and A1029-L, utilities can easily handle large reels. The large wooden bases and low handle efforts enhance safety and reduce operator fatigue. Simplex Reel Jacks are also an excellent choice for wire rope and sling manufacturers. Rentals@RentLGH.com Jacking Equipment 320B With three hooks; top fits up to 2-1 /2 inch spindles; side hooks fit up to 2 inch spindles. 321B (shown above) With five hooks; top fits up to 3-1 /2 inch spindles, next hook down fits up to 3 inch spindles, and lowest three fit up to 2-3 /8 inch spindles. This model is recommended for use on firm surfaces. A1029 The A1029 has a light weight aluminum alloy housing and three hooks; top fits up to 3 inch spindles, side hooks fit up to 2 3 /8 inch spindles. Equipped with right or left-handed t-base, supported by three adjustable steel rods to provide a sturdy, non-rocking foundation for outside use. Caps swivel for easy reel mounting. Steel lever bars are ordered separately. per Pair Side Hooks (Tons) Top Hooks (Tons) Handle Effort per Ton Stroke Reel Dia. Top Hook Order Number Steel Lever Bars Length Diameter 320B B /2 128 * /4 17 A1029-R / /8 86 * /4 17 A1029-L / /8 86 * /4 17 *Lever bar can be substituted resulting in lower handle effort. 136

4 Mechanical Jacks 5 20 Ton Ratchet Jack 22B 85A 85A is used to lift a CNC machine for installation. Five ton lifting capacity, low toe height and light weight make the models 84A, 85A, & 86A universal tools. Ten ton models 1017 & A1022 are used extensively by structural movers, riggers & maintenance crews. 5 Ton Ratchet Jacks These units are all mechanically identical and vary only in stroke and height. 10 Ton Ratchet Jacks The 1017 and 22B incorporate a ductile iron housing for maximum durability. The A1022, which is identical to the 22B except for an aluminum housing, is the ideal choice when portability is important. These jacks are often selected for lifts of 10 tons or less because of their low handle effort. Supporting Cap. (Tons) Lifting Cap. (Tons) Stroke Handle Effort per Ton Cap Min. Steel Toe Min. Base Size 84A /4 5 x 7 3 / A /4 5 x 7 3 / A /4 5 x 7 3 / / /4 2 6 x 8 3 /4 40 A /8 2 1 /4 6 1 /2 x 10 1 / B /8 2 1 /4 6 1 /2 x 10 1 /4 70 A x 8 1 / A /4 2 1 /4 8 x 10 1 / /4 2 1 /4 8 x Pivot Bases are included on model A1538. Optional for the A1538 are I-Beam Base (#10800) and Chain (#10760). Order Number Lever Bars Length Diameter / / Jacking Equipment 137

5 Mechanical Jacks Ton Superjack Outdoor use and weld splatter can shorten the life of standard jacks. We chose Simplex Superjacks for the bullet proof construction and holding power. They provide trouble-free service in the roughest applications. Superjacks Jacking Equipment (Tons) Min. Stroke Handle Effort Per Ton Base Diameter A1510C / / C / /2 43 A2510C / /2 34 A2515C / D / /2 44 A3510D / / B / /4 80 A5010B / /4 61 Order Number Steel Lever Bars Length Diameter /

6 Air Bags Ton Airbag & Accessories 202 Dual Controller 291 Single Controller Max Lifting Cap. (Tons) Lifting Ht. (Steel) (Kevlar) Max Working Pressure (p.s.i.) Dimensions Length Width Collapsed Ht. (Steel) (Kevlar) k N/A k N/A s 106k s 113k s 122k s 132k s 150k s 170k All lifting capacities mentioned in the charts are measured at the maximum effective lifting area (A). As the air bag is inflated (B), this effective area decreases (C) due to the rounded shape of the air bag. Lifting capacity also decreases (see performance chart). Stack up two jacks together to increase effective lifting height. Jacking Equipment 139

7 Hydraulic s Ton Single-Acting, Spring Return RC256 RC506 Rentals@RentLGH.com Jacking Equipment Cap. Tons (Max) Stroke Effective Oil Cap. Area (in. 3 ) (in. 2 ) Collapsed A Extended B Outside Dia. D Bore Dia. E Plunger Dia. F Base to Adv. Port H Saddle Dia. J Saddle Protrusion from Plngr. K Collar Thread W Collar Thread Length X RC-50** ** ** 2.2 RC / RC / RC-55* (4.9) / RC / RC / RC / RC-102* / RC / RC-106* / RC-108 (11.2) / RC-1010* / RC / RC / RC / RC / RC-154* / RC-156* / RC-158 (15.7) / RC / RC / RC / RC / RC-252* / RC-254* / RC-256* / RC-258 (25.8) / RC / RC / RC-2514* / RC (32.4) / RC RC RC-506* (55.2) RC RC / RC-7513 (79.5) / RC (103.1) / RC / *Available as a set. **RC-50 cylinder has non-removable grooved saddle and no collar thread. ***D1=1.63 inch, L =.81 inch, M = 1.00 inch. 140

8 Hydraulic s Ton Single-Acting, Spring Return, Low-Profile RCS302 RCS-Series RSM-Series RCS1002 Cap. Tons (Max) Stroke Effective Area (in 2 ) Oil Cap. (in 3 ) Collapsed A Extended B Outside Diameter D Bore Diameter E Plunger Diameter F Base to Advance Port H Plunger Protrusion from Base K Plunger to Base L Plunger to Mtg. Hole M 5 (4.9).25 RSM-50* x (11.2).44 RSM x (22.1).44 RSM x (32.4).50 RSM x (48.1).63 RSM x (79.5).63 RSM x (98.1).63 RSM x (153.4).63 RSM x (11.2) 1.50 RCS-101** (22.1) 1.75 RCS-201** (32.4) 2.44 RCS-302** (48.1) 2.38 RCS-502** (98.1) 2.25 RCS-1002** * RSM-50 is fitted with an AR-400 coupler. ** Available as a set. Jacking Equipment 141

9 Hydraulic s Ton Single-Acting, Load Return, Pancake Lock Nut CLP Series Note: These cylinders have tilt saddles. Rentals@RentLGH.com Jacking Equipment Cap. Tons (Max) Stroke Effective Area (in 2 ) Oil Cap. (in 3 ) Collapsed A Extended B Outside Diameter D Bore Diameter E Plunger Diameter F (mm) Base to Advance Port H Saddle Diameter J Saddle Protrusion from Plunger K Saddle Max. Tilt Angle R Lock Nut S 60 (67.1) 1.97 CLP Tr 104 x (113.7) 1.97 CLP Tr 136 x (179.2) 1.77 CLP Tr 171 x (221.3) 1.77 CLP Tr 190 x (284.2) 1.77 CLP Tr 216 x (433.6) 1.77 CLP Tr 266 x (566.2) 1.77 CLP Tr 305 x CLP6002D101ID n/a n/a

10 Hydraulic s 50 1,000 Ton Single-Acting, Load Return, Lock Nut Optional Tilt Saddle CLL Series Cap. Stroke Tons (Max) 50 (59.1) 100 (102.9) 150 (153.9) 200 (206.1) 250 (284.0) 300 (353.6) 400 (433.9) 500 (566.3) 600 (662.9) 800 (911.6) 1000 (1136) Effective Oil Cap. Area (in 3 ) (in 2 ) Collapsed A Extended B Outside Dia. D Bore Dia. E Plunger Dia. F Base to Adv. Port H Stand. Saddle Diam. J Saddle Protrusion from Plgr. K Depth of Plunger Hole L Lock Nut S 1.97 CLL Tr 95 x CLL Tr 95 x CLL Tr 95 x CLL Tr 95 x CLL Tr 95 x CLL Tr 95 x CLL Tr 130 x CLL Tr 130 x CLL Tr 130 x CLL Tr 130 x CLL Tr 130 x CLL Tr 130 x CLL Tr 159 x CLL Tr 159 x CLL Tr 159 x CLL Tr 159 x CLL Tr 159 x CLL Tr 159 x CLL Tr 184 x CLL Tr 184 x CLL Tr 184 x CLL Tr 216 x CLL Tr 216 x CLL Tr 216 x CLL Tr 241 x CLL Tr 241 x CLL Tr 241 x CLL Tr 266 x CLL Tr 266 x CLL , Tr 266 x CLL Tr 305 x CLL Tr 305 x , CLL Tr 305 x , CLL Tr 330 x CLL Tr 330 x , CLL , Tr 330 x , CLL Tr 387 x , CLL , Tr 387 x , CLL , Tr 387 x , CLL Tr 432 x , CLL , Tr 432 x , CLL , Tr 432 x ,151 CLL-50 to CLL-250 CLL-300 to CLL Jacking Equipment 143

11 Hydraulic s Ton Double-Acting, Center Hole RRH Series Double-acting hollow plunger Rentals@RentLGH.com Jacking Equipment Stroke Max Effective Area (in. 2 ) Oil (in. 3 ) Advance Retract Advance Retract Advance Retract 7.00 RRH RRH RRH RRH RRH RRH RRH RRH RRH RRH Collapsed A Extended B Out. Dia. D Bore Dia. E Plunger Diam. F Cyl. Base to Adv. Port H Cyl. Top to Return Port I Saddle Diam. J Saddle Protrusion from Plngr. K Plunger Thread Length P Collar Thread W Collar Thread Length X Center Hole Diam. Y / / / / / / / /

12 Hydraulic s Ton Double-Acting capacity Stroke Cyl. effect Area (in. 2 ) Oil Cap (in. 3 ) Collap. A Ext. B Outside Diam D Cyl. Bore Diam E Plngr. Diam. F Cyl. Base to Advance port H 2.25 RR RR / RR / RR / RR RR / RR / RR , / RR , / RR , / , RR / RR / RR , / RR , / , RR , / , RR , / RR / RR , / RR , / , RR , / , RR , / , RR , / , RR / / RR , / / , RR , / / , RR , / / , RR , / / , RR , / / ,700 Stroke Maximum Operating Pressure Number (psi) Maximum Effective Area Oil Push Pull Push Pull Push Pull ,000 CLR Collapse A Extend B Outside Dia. D Bore Dia. E Plunger Dia. F Base to Advance Port H Top to Retract Port I Standard Saddle Dia. J Saddle Protr. from Plgr. K Depth of Plunger Hole L Saddle Diam. J Saddle Protrusion from plngr K Plunger Internal Thread O Plunger Thread Length P Collar Thread W Collar Thread Length X Top to Return Port Jacking Equipment 145

13 Hydraulic s Ton Double-Acting Rentals@RentLGH.com Jacking Equipment Stroke capacity Number Maximum Effective Area (in. 2 ) Oil (in. 3 ) Collap. A Ext. B Outside Diam. D Cyl. Bore Diam. E Plunger Diam. F Base Mounting Hole Dimensions / (ton) Base to Advance Port H Top to Retract Port I Bolt Circle U Standard Saddle Diam. J Saddle Protrusion from Plngr K Thread Size V (mm) Depth of Plunger Hole L Push Pull Push Pull Push Pull 1.97 CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG CLRG Minimum Thread Depth Z CLRG M12.87 CLRG M12.87 CLRG M12.87 CLRG M12.87 CLRG M CLRG M CLRG M CLRG M CLRG M CLRG M CLRG M

14 Hydraulic s Ton Single-Acting, Load Return capacity Stroke Cyl. effect Area (in2) Oil Cap (in3) Collap. A Ext. B Outside Diam D Cyl. Bore Diam E Plngr. Diam. F Cyl. Base to Advance port H Saddle Diam. J Saddle Protrusion from plngr K Depth of Plunger Hole L Base Mounting Holes 1.97 CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M CLSG M Bolt Cir. Diam U Thread V Thread Depth X Jacking Equipment 147

15 Hydraulic s Ton Single-Acting, Load Return Optional Tilt Saddle Rentals@RentLGH.com Jacking Equipment Stroke Cyl. Effect Area (in. 2 ) Oil Cap (in. 3 ) Collap. A Ext. B Outside Diam D Cyl. Bore Diam E Plngr. Diam. F Cyl. Base to Advance Port H Saddle Diam. J J1 Saddle Protrusion from Plngr K K1 Depth of Plunger Hole L Base Mounting Holes 1.97 CLSG n/a.12 n/a M CLSG M CLSG , n/a.12 n/a M CLSG n/a.12 n/a M CLSG n/a.12 n/a M , CLSG , n/a.12 n/a M , CLSG n/a.12 n/a M , CLSG n/a.12 n/a M , CLSG , n/a.12 n/a M , CLSG n/a.12 n/a M , CLSG , n/a.12 n/a M , CLSG , n/a.12 n/a M , CLSG n/a.12 n/a M , CLSG , n/a.12 n/a M , CLSG , n/a.12 n/a M ,172 Bolt Cir. Diam U Thread V Thread Depth X 148

16 Hydraulic s Ton Single-Acting, Spring Return, Center Hole Stroke capacity 12 [13.8] 12 [13.8] 12 [13.8] 12 [13.8] 20 [23.6] 20 [23.6] 30 [36.1] 30 [36.1] 60 [63.6] 60 [63.6] Cyl. effect Area (in2) Oil Cap (in3) Collap. A Ext. B Outside Diam D Cyl. Bore Diam E Plngr. Diam. F Cyl. Base to Advance port H Saddle Diam. J Saddle Protrusion from plngr K Plunger Internal Thread O Plunger Thread Length P Collar Thread W Collar Thread Length X Top to Return Port 0.31 RCH / / RCH / RCH / / RCH / RCH / / RCH / / RCH / / RCH / / RCH / / RCH / / [103] 3.00 RCH / Jacking Equipment 149

17 A - Minimum Ht. B - Extended Ht. Hydraulic s 5 10 Ton Single-Acting, Spring Return Spring Return s Base Mounting Holes 5 Ton (except R-50) 1/4-20 UNC-2B THD On a 1.00 Dia B.C.,.56" dp. D F 10 Ton (except R101) 5/16-18 UNC-2B THD. On a 1.56 Dia. B.C.,.50" dp. G C See page 17 for R50 mounting dimensions. E Rentals@RentLGH.com Jacking Equipment Cap. Stroke Oil Cap. Req d (cu. in.) Ram Bore Dia. Effect Area (sq. in.) Cap. (psi) A B C D E F G Piston Piston Body Piston Base to Collar Min. Ht. Ext. Ht. I.D. Thrds O.D. O.D. Port C/L Thrds Thrds Depth R50 5 5/ /8 1 10, /8 2 1 /4 2 9 /16 1 3/ P41 R / /8 1 10, /8 5 5 / / /4 3/ /4 1 1 / /8 2.3 P41 R / /8 1 10, / /2 1 1 / /4 3/ /4 1 1 / /8 3.3 P41 R / /8 1 10, / /8 1 1 / /4 3/ /4 1 1 / /8 4.1 P42 R / /8 1 10, / / / /4 3/ /4 1 1 / /8 5.3 P42 R / /8 1 10, / / / /4 3/ /4 1 1 / /8 6.1 P42 R / / /4 8, / / /4 1 1 /2 3/ / /8 4 P42 R / / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /8 5.1 P42 R / / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /8 7.2 P42 R / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /8 9.8 P42 R / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /16 12 P42 R / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /8 14 P42 R / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /16 15 P42 R / /4 8, / / /4 1 1 /2 3/ /4 2 1 / /16 18 P42 Collar Thru Lgth Wgt. Sugstd. Hand Pump 150

18 Hydraulic s Ton Single-Acting, Spring Return Spring Return s Large steel coils that were damaged in handling are reshaped using a Simplex R256 cylinder and PE70 Series pump. Cap. Stroke Oil Cap. Req d (cu. in.) Ram Bore Dia. Effect Area (sq. in.) Cap. (psi) A B C D E F G Piston Body Piston Base to Piston I.D. Min. Ht. Ext. Ht. Thrds Collar Thrds O.D. O.D. Port C/L Thrds Depth R / /64 9, / / /4 1 5 /8 3/ / /16 9 P42 R / /64 9, / / /4 1 5 /8 3/ / /16 11 P42 R / /64 9, / / /4 1 5 / / /16 15 P42 R / /64 9, / / /4 1 5 / / /16 21 P140 R / /64 9, / / /4 1 5 / / /16 26 P140 R / /32 9, / / /2 1 5 / / /8 3 5 / /16 13 P42 R / /32 9, / / /2 1 5 / / /8 3 5 / /16 14 P42 R / /32 9, / / /2 1 5 / / /8 3 5 / /16 18 P42 R / / /32 9, / / /2 1 5 / / /8 3 5 / /16 22 P42 R / / /32 9, / / /2 1 5 / / /8 3 5 / /16 27 P140 R / / /32 9, / / /2 1 5 / / /8 3 5 / /16 31 P140 R / / /32 9, / / /2 1 5 / / /8 3 5 / /16 36 P140 R / / /32 9, / / /2 1 5 / / /8 3 5 / /16 39 P140 Collar Thru Lgth Wgt. Sugstd. Hand Pump Jacking Equipment 151

19 Hydraulic s Ton Single-Acting, Spring Return Spring Return s Contractors called on the brute force of Simplex R5513 cylinders to lift and position highway ramps in San Diego. G6 provided the power and control in this rough outdoor application. Rentals@RentLGH.com Jacking Equipment Cap. Stroke Oil Cap. Req d (cu. in.) Ram Bore Dia. Effect Area (sq. in.) Cap. (psi) A B C D E F G Piston Body Piston Base to Piston I.D. Collar Min. Ht. Ext. Ht. Thrds O.D. O.D. Port C/L Thrds Thrds Depth R / /8 6 1 /2 9, / / /4 2 1 /4 1 1 / / /16 40 P82A R / /32 9, / / /8 1 3 / /16 33 P42 R / /32 9, / / /8 1 3 / /16 42 P82A R / / /32 9, / / /8 1 3 / /16 51 R / / /32 9, / / /8 1 3 / /16 83 R /2 16 9, / /8 5 3 /4 3 3 /4 1 3 / / /4 65 R / /2 16 9, / / /4 3 3 /4 1 3 / / /4 130 R / / /8 9, / / /8 5/ / /4 90 R / / /8 9, / / /8 5/ / /4 110 Power pumps are suggested for these units. Collar Thru Lgth Wgt. Sugstd. Hand Pump 152

20 Hydraulic s Ton Single-Acting, Spring Return, Low-Profile Flat Jacks Simplex RFS Series are designed specifically for near impossible lifting, clamping or positioning jobs where space is at a premium. Ideal for break loose or start up spreading jobs. These mini-monsters pack up to 150 tons of force into a convenient, portable package. Mounting Hole Dimensions H I Base Mounting Hole Dimensions 5 Ton /8 7/32 through x 23/64 C Bore (1/4 Deep) 10 Ton 1 11 / /32 9/32 through x 27/64 C Bore (5/16 Deep) 20 Ton 1 9 / /16 25/64 through x 5/8 Bore (25/64) A Stroke B Min. Ht. C Ext Ht. Ram Bore Dia. Effect Area (sq. in.) cap. (psi) Oil Cap. Req d (cu.in.) D Body O.D. E Piston O.D. F Base To Port C/L G Piston O.D. Spring Ret. R50 5 5/8 1 5 /8 2 1 /4 1 1 / , / / RFS / / / , /4 2 3 /16 3/ /16 RFS / / / , /8 6.0 RFS /2 2 5 / / / , /2 3 3 /4 3/4 1 3 /8 8.5 RFS /8 3 1 /4 3 1 / , /2 4 1 /2 1 3 / RFS /8 3 1 /8 3 3 /4 4 1 / , /2 5 1 /2 2 1 / RFS / , / RFS / / /2 6 1 / , /2 7 1 /2 15/ Sugstd. Hand Pump P41/P71 P42/P72 Jacking Equipment 153

21 Hydraulic s Ton Single-Acting, Spring Return, Low-Profile Low Profile s Simplex RLS Series provides the ideal fit & force required for most bridge lifting and pier cap maintenance jobs. Compact, light weight & tough as nails, Simplex cylinders are at home on any construction site. Rentals@RentLGH.com Jacking Equipment A Stroke B Min. Ht. C Ext Ht. Ram Bore Dia. Effect Area (sq. in.) cap. (psi) Oil Cap. Req d (cu.in.) D Body O.D. E Piston O.D. F Base To Port C/L RLS / / / / , /4 1 1 /2 9 11/16 RLS /4 3 7 /8 5 5 /8 2 3 / , / RLS / /8 7 1 / / , /8 3/4 15 RLS / / / / , /8 2 3 /4 15/16 24 RLS /4 5 9 / / , /2 3 5 /8 1 1 /4 50 P140 Sugstd. Hand Pump P42/P72 154

22 Hydraulic s 10 1,000 Ton Double-Acting Double-Acting Push Cap. Pull Cap. Stroke A Min. Ht. B Ext. Ht. Pull Effect Area (sq. in.) Push Effect Area (sq. in.) Cap. (psi) Oil Cap. Req d (cu. in.) C Body O.D. Ram D Piston Bore O.D. Dia. RDA / / , /8 1 3 / / / /16 28 RDA / / / , /8 40 /8 1 1 / / /16 RDA / / / /8 64 RDA / / / /4 68 RDA / / , /8 3 3 / / /4 114 RDA / / /4 201 RDA / / / / , / / /2 RDA / / /4 187 RDA / / / , / /2 3 1 / /4 8 1 / / RDA / / , / /2 3 1 / /4 8 1 / / RDA / / RDA / / , /2 9 3 / /8 315 RDA / / RDA / / RDA / / , /2 441 RDA / / RDA / / RDA / / , / RDA / / RDA / / RDA / / , RDA / / ,300 RDA RDA , /2 1,188 RDA ,595 RDA ,166 RDA / / , / /2 1,461 RDA ,360 1,776 RDA ,558 RDA ,810 1, ,058 RDA ,142 2,808 Piston I.D. Thrds. F Piston Thrd. Depth Collar Thrds. G Collar Thrd. Lgth. Jacking Equipment 155

23 Hydraulic s 30 1,000 Ton Single-Acting, Load Return, Lock Nut Lock Nut s 5% Note: 100 ton models have removable lifting eye bolts in lieu of carrying handles. Note: Eye bolts are removable. Rentals@RentLGH.com Jacking Equipment A Stroke B Min. Ht. C Ext. Ht. Ram Bore Dia. Effect Area (sq. in.) Cap. (psi) Oil Cap. Req d (cu. in.) D Body O.D. E Piston O.D. F Base To Port C/L RLN /8 8 3 / / , /16 3/4 RLN / / RLN /4 8 3 / RLN / /4 3 3 / , /16 25/ RLN / / RLN RLN , /8 4 5 / / RLN RLN RLN / / , /2 5 9 / / RLN RLN / / RLN / /2 7 1 / , / / RLN / / RLN / / RLN / /2 8 3 / , / / RLN / / RLN / / RLN / / / , / RLN / /16 1, RLN / / RLN / / / , / /16 1,041.0 RLN / /4 1, ,383.0 RLN / / RLN / / / , / / /2 1,232.0 RLN / /8 1, ,603.0 RLN / / ,148.0 RLN / / / , / /8 1,407.0 RLN / /16 1, ,795.0 RLN / / ,818.0 RLN , / / ,950 1, / /4 2,178.0 RLN / /8 2, ,

24 Hydraulic s Ton Single-Acting, Spring Return, Center Hole Single Acting Base Mounting Holes Size Thread Depth Bolt Circle Dia. 12 Ton 5/ / Ton 3/8 16 7/ /4 30 Ton 3/8 16 3/8 3 5 /8 60 Ton 1/2 13 7/ /8 100 Ton 5/8 11 3/4 7 Cap. Stroke A Min. Ht. B Ext. Ht. Effect Area (sq. in.) Pres.@ Cap. (psi) Oil Cap. Req d (cu. in.) C Body O.D. D Piston O.D. E Base To Port C/L F Center Hole Dia. H Collar Collar Thrd. Thrds. Lgth. Piston Thrds. RC120 3/4 16 5/ / /2.90 7/16 RCQ120 3/4 10 G Piston Thrd. Lgth. RC , /4 1 3 /8 49/ / / /8 4 3 /4 6 3 /8 4.5 RC /32 3/4 16 5/8 5/8 3.5 RC / / RC / / , /8 51/ / / /2 1 9 / /4 RC / / RC / / , /2 1 5 / / / / /8 RC / / / /16 RC / / , / /8 6 1 / /4 16 3/4 RC / / RC , / / Jacking Equipment 157

25 Hydraulic s 30 1,000 Ton Single-Acting, Load Return 5% Load Return Note: 100 ton models have removable lifting eye bolts in lieu of carrying handles. Note: Eye bolts are removable. Rentals@RentLGH.com Jacking Equipment A Stroke B Min. Ht. C Ext. Ht. Ram Bore Dia. Effect Area (sq. in.) Cap. (psi) Oil Cap. Req d (cu. in.) D Body O.D. E Piston O.D. F Base To Port C/L RLR / /8 2 7 / , / RLR / / RLR / / / , / RLR / / RLR / / , /8 3 3 /8 1 1 /4 RLR / / RLR RLR / , / / RLR RLR RLR / , / / RLR RLR / / RLR / /4 8 3 / , / / RLR / / RLR / / RLR / / / , / RLR / /2 1, RLR / / RLR / / / , / / RLR / /8 1, ,197.0 RLR / / RLR / / / , / / / RLR / /2 1, ,273.0 RLR / / RLR / / / , / /8 1,256.0 RLR / /16 1, ,644.0 RLR / / ,523.0 RLR , / / ,950 1, / /4 1,883.0 RLR / /8 2, ,

26 Hydraulic Hand Pumps Light and Heavy Hand Pump P300 P140 P42 P20 P22 Speed 2 Pressure Rating (PSI) 1 Stage Stage 2,850 1 Stage Stage 10,000 Light Hand Pumps For Single-Acting s Oil Volume Per Stroke (cu. in.) Usable Oil (cu. in.) 20 A B C D E Slot Size F G /2 2 5 /8 1 1 /2 19/ /4 4 3 / / /2 2 5 /8 1 1 /2 19/ /4 5 3 /4 P , / /4 5 3 / Stage 200 P42 2 Stage 10, Stage 200 P82A 2 Stage 10, / /4 5 3 / /2 5 1 /2 5 1/2 6 5 /8 5 3 /4 24 Two Speed Hand Pumps For Single & Double Acting s Speed Pressure Rating (PSI) Oil Volume Per Stroke (cu. in.) Usable Oil (cu. in.) A B C 10 P / / /16 26 P300 Single 1 Stage / /2 37 P230 Acting 2 Stage 10, / /4 P P140D / / /16 30 P300D Double 1 Stage / / /2 41 P230D Acting 2 Stage 10, / /4 P461D Jacking Equipment 159

27 Gasoline Hydraulic Pumps Gas Powered PG40/50 and G4 Series PGM4042 Reservoir Size (Gal.) Valve Style Function Motor Type Flow Rate PGTM VP3 Standard 3 Position; 3 Way Manual Lever Advance/Hold/Retract Tecumsa; 8 HP PGTM VP3 Standard 3 Position; 3 Way Manual Lever Advance/Hold/Retract Tecumsa; 8 HP PGTM VP4 Standard 3 Position; 4 Way Manual Lever Advance/Hold/Retract Tecumsa; 8 HP PGTM VP4 Standard 3 Position; 4 Way Manual Lever Advance/Hold/Retract Tecumsa; 8 HP 680 cu. 1,500 psi 140 cu. psi 680 cu. 1,500 psi 140 cu. psi 680 cu. 1,500 psi 140 cu. psi 680 cu. 1,500 psi 140 cu. psi G4833 Rentals@RentLGH.com Jacking Equipment Pressure Rating (psi) 1st Stage 2nd Stage 1st Stage 2nd Stage C Output Flow (cu. in./min.) Motor Value Type Reservoir G4833 1,100 10, HP 3W, 3P G4835 1,100 10, HP 3W, 3P G4843 1,100 10, HP 4W, 3P G4845 1,100 10, HP 4W, 3P B A Usable Resevoir ; Gallons Dimensions A B C

28 Electric Hydraulic Pumps 50 and G6 Series Electric Pump PEM 5006 Pressure Rating (psi) Output Flow (cu. in. / min) Motor Spec. 1st Stage 2nd Stage 1st Stage 2nd Stage (vac) (amps) Valve Type Pendant Control Reservoir PEM5066 1,500 10, w, 3P (L) B C D A E Usable Reservoir (gal.) G6335 C Usable Oil (cu. in.) A Dimensions B C D 40 9, / B D E A E Pressure Rating (psi) 1st Stage 2nd Stage Output Flow (cu.in./min.) 1st Stage 2nd Stage (vac) Motor (amps) Value Type Pendant Reservoir G6335 1,500 10, W, 3P G6336 1,500 10, W, 3P G6336L 1,500 10, W, 3P (L) G6365 1,500 10, W, 3P Solenoid G6366 1,500 10, W, 3P Solenoid G6366L 1,500 10, W, 3P (L) Solenoid G6346 1,500 10, W, 3P G6347 1,500 10, W, 3P G6347L 1,500 10, W, 3P (L) G6375 1,500 10, W, 3P Solenoid G6376 1,500 10, W, 3P Solenoid G6376L 1,500 10, W, 3P (L) Solenoid Dimensions Usable Reservoir ; Gallons Usable Oil (cu. in) A B C D E 5 1, , , Jacking Equipment 161

29 Electric Hydraulic Pumps ZU Pump 2 Gallon 5 Gallon Rentals@RentLGH.com Jacking Equipment Usable Reservoir (gal) A B Dimensions C D E F Motor Size (hp) 100 psi Output Flow Rate (in. 3 /min) 700 psi ZU4 Performance 5000 psi 10,000 psi Motor Electrical Specification / /60 Sound Level (dba) Relief Valve Adjustment Range (psi) ,000-10,

30 Hydraulic Accessories High Pressure Hoses & Accessories High Flow HD & HDC Series 3/8 I.D. hose is recommended to achieve higher retraction speeds and minimal flow restrictions. These heavy duty hoses are rated at 10,000 psi with a minimum burst pressure of 30,000 psi. Hydraulic Hoses Length (ft.) Hose End Hose End I.D. HD3 HD6 HD10 HD20 HD50 HDC3 HDC6 HDC10 HDC /8 NPTF Male 3/8 NPTF Male 3/8 NPTF Male C213 Coupler* 3/8 HDC50 *All hoses with couplers includes CR215 Dust Cap. Note: Recommended for use with Suc-O-Matic Pumps. C213 Coupler* C213 Coupler* In this fixed outdoor application Simplex hand pumps and hoses are permanently attached to this mineral processing machine. The desert environment is tough on hydraulic equipment. Simplex provides us the reliability we need. Jacking Equipment 163

31 Hydraulic Accessories Manifolds / Fittings & Oil High Pressure Manifolds Pump Mounted 4 Control Manifold Kit: The M1 control manifold incorporates (4) station shut-off/flow control valves, 18 hose, gauge port, (4) high flow couplers and pump mounting hardware. Two or more manifolds can be coupled together for larger systems. For replacement hose order #89521 Pump Mounted 4 Manifold Kit: The M2 manifold includes 18 hose and pump mounting hardware. Two or more manifolds can be coupled together for larger systems. For replacement hose order #89521 Pump Mounted 2 Control Manifold Kit: The M2A control manifold incorporates (2) station shut-off/flow control valves. Two or more manifolds can be coupled together for larger systems. 6 Port Inline Hex Manifold: The M3 inline hex manifold features (6) 3 /8 NPTF threaded ports & mounting holes. Pump Mounted 4 Control Manifold Kit: The M4 control manifold incorporates (4) station shut-off/flow control valves. Two or more manifolds can be coupled together for larger systems. Rentals@RentLGH.com Jacking Equipment Simplex Hydraulic Oil Number A01 A05 A055 Hydraulic Oil Qty. 1 Gallon 5 Gallon 55 Gallons 3/8 NPTF High-Pressure 10,000 PSI Fittings Hex Nipple 3 Nipple 6 Nipple 90 Elbow 90 St. Elbow 3/8 M to 1/4 F Special, high pressure formulated, premium grade oil for all Simplex hydraulic products. High viscosity index insures maximum lubricity over a wide range of operating temperatures. Tee Coupling Cross 1/4 M to 3/8 F F1 F3 F6 F7 F9 F10 F11 F13 F15 F17 Simplex Hydraulic Oil Viscosity Index 100 min. VIS, 100 F VIS, 210 F VIS, 0 F < 15,000 Pour Point -50 F Flash Point 400 F Analine Point F Includes: Anti-Foam, Anti-Rust and Low Temperature Additives 164

32 Hydraulic Accessories Couplers 3/8 NPTF C213-Hose Half Coupler 3/8 & 1/4 NPTF High-Flow Couplers These premium grade couplers provide maximum fluid flow and are plated to resist corrosion. Half Couplers have male 3/8 NPTF threads C211-Ram Half Coupler & high strength rubber dust caps; Hose Half Couplers have female 3/8 NPTF threads. CR215 Dust Cap C209 Coupler Complete with 2 Dust Caps 1/4 NPTF CT201-Ram Half Coupler CT202 Hose Half Coupler CT200 Coupler Complete with 2 DUst Caps For use on smaller tools, pumps and any tool with 1/4 threads. These couplers are plated to resist corrosion. Half Couplers have male 1/4 NPTF threads; Hose Half Couplers have female 1/4 NPTF threads. 3/8 & 1/4 NPTF Flush Face/No Spill Couplers 3/8 NPTF C513-Hose Half Coupler C515-Dust Cap Ram Half C516-Dust Cap Hose half Unique flush face design features push to connect operation with a sleeve lock, and non-spill dry disconnect operation. Easy cleaning minimizes system contamination. This coupler should be used where ever oil spillage constitutes a safety or environmental hazard. Couplers have 3/8 NPTF threads. C511-Ram Half Coupler 1/4 NPTF CT211 Ram Half Coupler with Dust Cap C509 Coupler Complete with 2 Dust Caps CT210 Hose Half Coupler with Dust Cap CT212 Coupler Complete with 2 Dust Caps Unique flush face design features push to connect operation with an auto lock sleeve on the CT211, and non-spill dry disconnect operation. Easy cleaning minimizes system contamination. This coupler should be used wherever oil spillage constitutes a safety or environmental hazard. Couplers have 1/4 NPTF threads. Jacking Equipment 165

33 Hydraulic Accessories Analog & Digital Gauges Analog & Digital Gauges Gauge Description Dimensions G5 2.1/2 Gauge 500 PSI Increment 3/8 M 1/4 F GA1 Gauge Adapter 3/8 F The G5 is a high quality compact liquid filled gauge that reads in both PSI and Bar. Liquid filled to dampen needle vibration, the G5 is perfect for applications up to 10,000 psi. Liquid filled dampens needle vibration. +/-1% full scale accuracy. 500 psi increment. Stainless steel casing. G6 4 Gauge 500 PSI Increment GA1 Gauge Adapter The G6 is a larger, easy to read liquid filled gauge that s in both PSI and Bar with increments of 500 psi. The calibrated scale reads from 0-10,000 psi with 10,000 psi to 15,000 psi as a warning zone. Liquid filled dampens needle vibration. +/- 1% full scale accuracy. Large easy to read 4 face. Rubber blowout plugs for safety. Stainless steel casing. G7 4 Gauge 100 PSI Increment GA1 Gauge Adapter The G7 is a larger, easy to read liquid filled gauge that s in both PSI and Bar with increments of 100 PSI/10Bar. The calibrated scale reads from 0-10,000 psi. Liquid filled dampens needle vibration. +/- 1% full scale accuracy. Large easy to read 4 face. Rubber blowout plugs for safety. Stainless steel casing. Standard on all Simplex Torque Wrench Pumps. Rentals@RentLGH.com Jacking Equipment GD1 2 1/2 Digital Gauge GD2 4 Digital Gauge Tonnage Gauge GA1 Gauge Adapter GA1 Gauge Adapter GA1 Gauge Adapter The GD1 is designed for the high cycle pressure application where mechanical gauges don t hold up. The GD1 is a direct mount, compact gauge with an all stainless steel sensor that is vibration & shock resistant. Self powered Lithium batteries. Full 4 digit display. +/-.25% full scale accuracy. 10 million cycle life minimum. The GD2 digital gauge combines the best features of analog and digital instruments. The 0.75 high full 4 digit display is easily read at a distance and the analog bar graph allows instant estimation of changing pressures. The all stainless steel sensor is vibration and shock resistant characters and 270 bar graph analog readout. Splash proof phenolic housing. +/-.25% full scale accuracy. Keypad enable/disable of peak high or peak low hold. Calibrated Range Face (0-10,000 psi) Diameter s Used With and Tons GT5 0 5, 10, 15 All 5, 10 & 15 Ton s GT , 50 All 20 RFS & RLS 50 Ton s GT , 55, 100 All 25, 55 & RFS & RLS 100 Ton s GT , 50, Ton s, 50 & 100 RLR & RLN GT , 150, 200 RDA100 & 200 Series, RLR & RLN 150 & 200 GTH , 20, 30 12, 20 & 30 Ton RC & RCD Series GTH , 100, , 100, & 150 Ton RC & RCD Series 166

34 Hydraulic Jacks Ton Spreader Jack S3000A S2000A S2000A 5 Ton Hydraulic Spreader Gat R Jaw Spreaders (PSI) Oil Required (cu. in.) Width S2000A ,000 S3000A Suggested Hand Pump P42 S3000A Cap. Cap. (PSI) 5 Ton Hydraulic Spreader Oil Cap. Req. (cu. in.) Min. Spread Max. Suggested Hand Pump SF5 5 10, P Ton Push/Pull Jack 10 Ton Push/Pull & Ratchet Screw Assembly Cap. Offset Cap. Travel Screw Dia. Length Ton Ratchet Screw Assembly Wgt. Order Number Steel Lever Bars Length Dia /2 1 1 / LB / / LB /4 4 Wgt. Jacking Equipment 167

35 Hydraulic Jacks 2 10 Ton Toe Jack TJH5 Heavy equipment movers have long realized the benefits of Simplex toe jacks. Truly a universal tool, hydraulic toe jacks can do a wide variety of jobs faster & safer than standard jacks. With toes heights starting at 1 and capacities up to 10 tons, Simplex hydraulic toe jacks are the first choice for transformer maintenance, heavy hauling, structural moving, and rigging. Rentals@RentLGH.com Jacking Equipment Cap. Stroke Minimum Toe Cap Base Area Max. Handle Effort Method of Return TJH /16 5/8 9 1 / /64 x 7 51 Load 18 TJH / /4 7 1 /4 x 10 5 /8 33 Spring 53 TJH /8 1 1 / /8 9 1 /2 x 11 1 /4 38 Spring 85 TJH / /2 x Spring 56 TJH109LS / /8 6 x 9 73 Spring 41 Note: Handles are included with all self-contained models. 168

36 Hydraulic Jacks 5 60 Ton Toe Jack PS1230C PS630C Claw Stroke (in) Lift Per Stroke (in) of Jack (lbs) of Claw (lbs) Working Pressure (PSI) Effort on Lever (max) (lbs) Oil (pints) Service Kit Number 9501W PS630C , PS1230C , PS660C , PS1260C , A Width B Center Ram to Claw C Base Length Dimensions D Overall Depth F Ram Diameter H Closed J Base to Claw K Claw Depth 9501W PS630C PS1230C PS660C PS1260C Jacking Equipment 169

37 Synchronus Hydraulic Pump Hydra-Pac D Sync System Jacking Equipment Engine Type HP Hydra-Pac Synchronous Power System Features Synchronized control of 4 lifting points. Ability to safely raise/lower multiple cylinders. Safe and efficient control. Accuracy of +/ 5% regardless of pressure. Easy to operate simple and user friendly. Mechanical operation - no wires or electronics. Standardized components. Ergonomic design. Removable wheels. **Always follow operating manual instructions and safe jacking practices.** No. of Ports Flow Rate per Active Port (GPM) All Ports 2 Ports Paired Maximum Pressure (PSI) Oil Reservior (GAL) (lb) Dimensions (LxWXH) D Diesel , x 42 x 56 For use with standard 10,000 psi single or double acting cylinders. Ports can be paired to double flow rate at full pressure. 170

38 Heavy Track Skidding System HT500 Hydraulic Skidding System HT System Features A safer alternative to overhead lifting or rollers. No come-a-longs, winch lines, or hold backs required. Fully bi-directional track. Simple lug and pin connections. s automatically reset into ratchet tracks. Low profile perfect for areas with limited space/access. Leap frog tracks to move longer distances. Track will carry loads over unsupported spans. Durable low-maintenance graphite slide surface. Safety stop blocks. Can be operated with most 10,000 psi doubleacting pumps, but synchronous pumps are recommended. System (Tons) Hydra-Slide Skid System Width Track Section Length Track Section (lbs/ft) Load Bearing Track Skid Shoe Size Maximum Pressure (PSI) Skidding Speed (ft/hr) HT & Yes 24 x 18 10,000 55* *Skidding speed determined using D HPU Note: There is a total of 50 of double track available for rent. Jacking Equipment 171

39 Heavy Track Skidding System HT500 Hydraulic Skidding System Jacking Equipment 172

40 Synchronous Lifting 8 24 Point Lift System The solution for up to 8 24 lifting points with load control Features Control up to 24 lifting points Stroke and load controlled movement for positioning and weighing Accuracy of between leading and lagging cylinders Data storage and recording capabilities Load and stroke alarms for optimal safety For use with standard single or double-acting cylinders Integrated 10,000 psi hydraulic pump and controls 3 Phase Ports 220V 440V 8-Port x x 12-Port x x 24-Port x Typical Synchronous Lifting Applications Bridge lifting and repositioning Bridge launching Lifting and lowering of heavy equipment Leveling of existing structures and buildings Structural Testing Lifting and weighing of oil platforms Tunnel Jacking and pushing Jacking Equipment 173

41 Synchronous Lifting 8 24 Point Lift System The solution for up to 8 24 lifting points with load control Touch screen display for ESS Synchronous Lift Controller 1) Load Readings 2) On/Off 3) Absolute Sensor Position 4) Relative Sensor Position 5) Individual Load Readings 6) Manual Controls 7) Stroke Controls 8) Load Controls 9) Relative Position Reset Rentals@RentLGH.com Jacking Equipment Typical layout for a 4-point synchronous lifting system 1) Hydraulic Pump 2) PLC Control with Touch Screen 3) Hydraulic s 4) Stroke Sensors 5) Hydraulic Hoses 6) Sensor Cables 7) Solenoid Control Valves 8) Pressure Transducer 174

42 Need Additional Jacking Equipment? Please contact LGH today! or Hand Pump Mechanical Jacks Hydraulic s High Tonnage s Toe Jacks Gas or Electric Pumps Sync Lift Flat Jack s Air Bags Jacking Equipment 175

hydraulic & mechanical equipment catalog

hydraulic & mechanical equipment catalog SC105 A Century of Product Integrity hydraulic & mechanical equipment catalog TABLE OF CONTENTS INTRODUCTION pages 1-5 Index...1 Company Overview... 2-3 Safety Tips... 4-5 cylinders Introduction... 6-7

More information

hand pumps HAND PUMPS

hand pumps HAND PUMPS HAND PUMPS 30 Introduction Adjustable pivot for the absolute lowest handle effort Pivoting linkage reduces wear for longer pump life Fine threaded, no slip release knob for complete control Large bronze

More information

HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS

HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile

More information

Special sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) MXTA Series of Driving Type Hydraulic Torque Wrench.

Special sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) MXTA Series of Driving Type Hydraulic Torque Wrench. Torque Wrench Torque Wrench MXTA Series of Driving Type Hydraulic Torque Wrench Special sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) Max. working pressure up to 70Mpa,

More information

RACH, Aluminium Hollow Plunger Cylinders

RACH, Aluminium Hollow Plunger Cylinders RACH, Aluminium Hollow s Shown from left to right: RACH-4, RACH-, RACH-206, RACH-06 The Lightweight Solution for Tensioning and Testing s All RACH-cylinders are equipped with bolt-on hollow removable saddles

More information

TABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps. INTRODUCTION pages 1-5

TABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps.   INTRODUCTION pages 1-5 TLE OF ONTENTS INTRODUTION pages 1-5 power pumps Index...1 ompany Overview... 2-3 Safety Tips... 4-5 Introduction... 42-43 Proper Size & Selection... 44-45 G1 Series Electric... 46-47 G3 Series Electric...

More information

Hydraulic Cylinders and Lifting Products

Hydraulic Cylinders and Lifting Products Hydraulic s and Lifting Products Enerpac hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application... lifting, pushing, pulling, bending, holding...

More information

PRESSES INTRODUCTION THE SIMPLEX PRESS THE SIMPLEX PLUS. Moveable work head allows movement across the entire length of the top cross bar.

PRESSES INTRODUCTION THE SIMPLEX PRESS THE SIMPLEX PLUS. Moveable work head allows movement across the entire length of the top cross bar. INTRODUCTION PRESSES THE SIMPLEX PRESS Double pinned & welded construction for strength & safety. Friction brake winch for easy adjustment of work bed. Will not drop if handle is released. Moveable work

More information

P O W E R P U M P S SECTION INDEX. Proper Size & Selection G1 Series Electric...

P O W E R P U M P S SECTION INDEX.     Proper Size & Selection G1 Series Electric... SECTION INDEX Proper Size & Selection... 44-45 G1 Series Electric... 46-47 2 Series Electric... 48-49 G3 Series Electric... 5-51 G4 Series Electric... 52-53 P O W E R P U M P S G5 Series Electric... 54-55

More information

USE OF ENERPAC HYDRAULIC EQUIPMENT PRESENTED BY: HARDISH TRIVEDI

USE OF ENERPAC HYDRAULIC EQUIPMENT PRESENTED BY: HARDISH TRIVEDI USE OF ENERPAC HYDRAULIC EQUIPMENT 1 PASCAL S LAW Pressure applied at any point upon a confined liquid, is transmitted equally in all the directions & acts perpendicular to the surfaces with equal force.

More information

E325e. Hydraulic Power for all Industrial Applications

E325e. Hydraulic Power for all Industrial Applications E325e Hydraulic Power for all Industrial Applications The World- A complete range of quality high force tools for all industrial applications, with local availability and after sale service anywhere in

More information

Part No. Description Part No. Description

Part No. Description Part No. Description Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle

More information

ENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X

ENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X uy Online at www.uynerpac.com nerpac ydraulic s & Lifting Products NRPC hydraulic cylinders are available in hundreds of different configurations. Whatever the X I W bending, holding whatever the force

More information

ENERPAC HYDRAULIC PRODUCTS

ENERPAC HYDRAULIC PRODUCTS ENERPAC Enerpac features the most comprehensive family of high-force products, distributed globally yet supported locally, to make you more productive and the work you do safer and easier to perform. Decades

More information

Railroad Edition. 5 position adjustable handle. Aluminum Cribbing blocks storage rack. Aluminum extensions. for user safety and control.

Railroad Edition. 5 position adjustable handle. Aluminum Cribbing blocks storage rack. Aluminum extensions. for user safety and control. Portable 100 Ton Jacks Railroad Edition 5 position adjustable handle. Aluminum Cribbing blocks storage rack. The bottom of the cylinder is a bolted joint, using the base plate as part of the cylinder.

More information

RC-Series DUO, Single-Acting Cylinders. The Industry Standard General Purpose Cylinder

RC-Series DUO, Single-Acting Cylinders. The Industry Standard General Purpose Cylinder RCSeries DUO, SingleActing s From left to right: RC, RC, RC0, RC4, RC000, RC, RC00 The Industry Standard General Purpose Saddles All RC cylinders are equipped with hardened removable grooved saddles. For

More information

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series

More information

G6 Series. Power Pumps. The New G6 Series Electric & Gas Power Pumps. series

G6 Series. Power Pumps. The New G6 Series Electric & Gas Power Pumps. series SF004 Positioning & Lifting Equipment Specialists series G6 Series Power Pumps The New G6 Series Electric & Gas Power Pumps G6 Series Electric & Gas Shown See tables for additional models For over a century,

More information

TABLE OF CONTENTS. Hand Pump System, 2 Point Lift...17

TABLE OF CONTENTS. Hand Pump System, 2 Point Lift...17 TABLE OF CONTENTS PRODUCT APPLICATION Marine...3 Transportation...4 Power Generation...5 Fabrication...6 Petro-Chemical...7 Construction...8 Mining...9 Manufacturing...10 COMPONENT SELECTION Component

More information

sales@hydraquip.co.uk www.hydraquip.co.uk 1 Enerpac 700 bar Hydraulic Cylinders Single Acting, Spring Return Cylinders The G R2 Bearing System absorbs eccentric loading to prevent galling cylinder parts

More information

POSITIONING & LIFTING EQUIPMENT SPECIALISTS. A Quick Reference Guide To The Wide Range Of Simplex Solutions IDEAGENERATOR IG0911

POSITIONING & LIFTING EQUIPMENT SPECIALISTS. A Quick Reference Guide To The Wide Range Of Simplex Solutions IDEAGENERATOR IG0911 POSITIONING & LIFTING EQUIPMENT SPECIALISTS A Quick Reference Guide To The Wide Range Of Simplex Solutions IG0911 IDEAGENERATOR TABLE OF CONTENTS PRODUCT APPLICATION Marine... 3 Transportation... 4 Power

More information

THE FUTURE OF PRECISION IS HERE

THE FUTURE OF PRECISION IS HERE THE FUTURE OF PRECISION lifting IS HERE 1 Enerpac Pump Solutions Manual Lifting Composite and steel designs for rugged applications Lightweight, portable solution Ideal for applications with no power available

More information

Opmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1

Opmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1 Opmaak_V_Catalog_2007.qxp 4/16/2008 12:32 PM Page 1 2008 Opmaak_V_Catalog_2007.qxp 4/14/2008 3:36 PM Page 2 Index Single cting Cylinders 3 Lock-nut Cylinders 6 Threaded Cylinders 7 Flat ody Cylinders 8

More information

MATERIAL HANDLING. Industrial Safety Welding Oilfield Construction

MATERIAL HANDLING. Industrial Safety Welding Oilfield Construction Carts...382 Chains...362,363 Cylinder Cart Parts & Accessories...382 Cylinder Carts & Trucks...372,373 Drum Dollies & Racks...384 Grab Hooks...365 Hand Trucks...371,372 Hoist Hooks...365 Hoists & Pullers...358,359

More information

CONTENTS ONE YEAR LIMITED WARRANTY

CONTENTS ONE YEAR LIMITED WARRANTY CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR

More information

Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty.

Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. CONTENTS WWW.SHINNFUAMERICA.COM Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Service Jacks 3 Wheel Dolly & Engine Stand 13 Manual & Air/Manual Service

More information

STORAGE & MATERIAL HANDLING

STORAGE & MATERIAL HANDLING www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now

More information

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the

More information

POWER PUMPS. G1 Series - Electric. SUC-O-MATIC VALVE The 3 position / 3 way Suc-OMatic valve draws hydraulic oil. Power Pumps

POWER PUMPS. G1 Series - Electric. SUC-O-MATIC VALVE The 3 position / 3 way Suc-OMatic valve draws hydraulic oil. Power Pumps Series - Electric Reservoir apacity... gallon Flow @ Rated Pressure... 9 cu.in./min. Electric Maximum Pressure... psi Powered by a V - 6HZ,. hp universal motor (4,64 rpm). Low startup voltage, draws amps

More information

THAT S WHAT WE CALL HEAVY LIFTING!

THAT S WHAT WE CALL HEAVY LIFTING! THAT S WHAT WE CALL HEAVY LIFTING! Enerpac High-Tonnage s HCL-2006, LPL-602, HCR-2006 Highest Level of Durability Reaching the Summit Edition: Substrate bonded multi-layer treatment Hardened surface resists

More information

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains

Services. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established

More information

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE

SHOP MAINTENANCE. Open Throat ALL SHOP PRESSES AVAILABLE IN CE SHOP MAINTENAN 1 2 9 3 4 5 Open Throat 10 11 12 6 8 ALL SHOP PRESSES AVAILABLE IN THE UNIQUE BENEFITS OF THE POWER TEAM PRESS 1 2 TO 1 SAFETY FACTOR on hydraulic cylinders and they meet ASME B30.1 standards.

More information

Professional Products. Professional Results.

Professional Products. Professional Results. Professional Products. Professional Results. PROFESSIONAL PRODUCTS. PROFESSIONAL RESULTS. Established in 1963 American Forge & Foundry has built a long standing tradition of providing quality products,

More information

F G. Punch Dimensions

F G. Punch Dimensions SPH Series - Single Acting Punch Capacity... 35 tons Maximum Thickness....5 in. Maximum Pressure... 10,000 psi Industrial grade, single acting, spring return design. Punches holes in material up to.5 thick

More information

Power Units. Leading provider of bolt loading & removal solutions

Power Units. Leading provider of bolt loading & removal solutions Power Units More speed, power and durability Versatile units, power a wide variety of wrenches and tools Every unit tested by FASTORQ technicians Every unit complete with hoses, controllers, quick disconnects

More information

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

HYDRAULIC PUMPS CYLINDERS JACKS PULLERS TOOLS. Professional Grade High Force Hydraulic Products, Systems and Tools. PT0910 Full Line Catalog

HYDRAULIC PUMPS CYLINDERS JACKS PULLERS TOOLS. Professional Grade High Force Hydraulic Products, Systems and Tools. PT0910 Full Line Catalog HYDRAULIC PUMPS CYLINDERS JACKS PULLERS TOOLS Professional Grade High Force Hydraulic Products, Systems and Tools PT0910 Full Line Catalog ABOUT POWER TEAM Hydraulic Pumps Predator Portable Electric and

More information

The AFF Total Value Commitment

The AFF Total Value Commitment The AFF Total Value Commitment Since 1963, American Forge and Foundry has provided a full selection of Forge-Tough hydraulic lifting products, lubrication tools, and general shop equipment. Serving Repair

More information

Industrial Equipment HYDRAULIC TOOLS

Industrial Equipment HYDRAULIC TOOLS Industrial Equipment HYDRAULIC TOOLS PRODUCT INDEX Page Hydraulic Nut Crackers 73 Hydraulic Cutters 73 Mini-Cutter HMC 8 U 73 HAND PUMPS Hand Pump - Single-Stage - 733 Single-Acting Hand Pump - Two-Stage

More information

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder. R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable

More information

POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps

POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203

More information

HD-Series. Shop Equipment

HD-Series. Shop Equipment HD-Series Shop Equipment Reaching new heights Winntec (Est. 2002) is a manufacturer, esteemed developer and international supplier of high quality, efficient and reliable automotive workshop essentials,

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s & Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 324 3 Ton Floor SKU 964623 HEIHW93652 Min. Height: 5 Max. Height: 23-1/2 429 4 Ton Floor SKU

More information

MECHANICAL JACKS. mechanical

MECHANICAL JACKS. mechanical 124 MHNIL JKS MHNIL JKS Introduction Multiple-toothed pawls provide greater contact with rack bar Double-lever sockets for changing handle angle Plated Springs Resist orrosion djustable Spring Links Replaceable

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

Lifting Table of Contents

Lifting Table of Contents Table of Contents Chain Hoist...D12 Compac Professional Lifting...D7 OTC Professional Lifting...D9 - D11 Ramps...D11 TEQ Correct Lifting...D3 TEQ Correct Professional Lifting...D3 - D6 Strongarm Professional

More information

HOISTS RATCHET LEVER HOISTS

HOISTS RATCHET LEVER HOISTS Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale

More information

Material Handling Overview

Material Handling Overview MATEIAL HANDLING Overview All rental equipment is throughout North America. Overview For specific product information, refer to the group of equipment within this section s overview on the following page

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70 Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile

More information

Trans-Motion has Manufactured Welding and Industrial reels for a broad range of applications since 1985.

Trans-Motion has Manufactured Welding and Industrial reels for a broad range of applications since 1985. Reels for mobile & shop applications 2011.1 Catalog Trans-Motion has Manufactured Welding and Industrial reels for a broad range of applications since 1985. Reels for Industrial & Welding Applications

More information

$87995Reg Dlr. $1344

$87995Reg Dlr. $1344 3 TON LOW PROFILE PROFESSIONAL FLOOR JACK 300T Low pick up point of 3.75 High height of 21.5 Universal joint technology for precise release valve control Plungers use a U Cup design instead of O ring,

More information

Simply... The Most Advanced Wrench Ever Produced

Simply... The Most Advanced Wrench Ever Produced Technical TU SERIES SPECIFICATIONS Simply... The Most Advanced Wrench Ever Produced Faster Stroke! Anti-Back Lash Mechanism! Hands-Off Operation! Accurate Repeatability! Are only a few of the Improvements

More information

PSC Series General Purpose Single Acting Cylinders

PSC Series General Purpose Single Acting Cylinders PSC Series General Purpose Single Acting Cylinders Features 1. Complies to ASME B-30.1. High strength alloy steel for safety and durability 2. Inside cylinder treated to enhance durability 3. Collar threads,

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s and Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 404 3 Ton Ratcheting Stand Set SKU 964601 94 HEIHW93503 Max. Height: 19 Ratchet Action Height

More information

DD2T2. Engineering Data. Performance Bare Model Motor HP PSI RPM ACFM DD2T2 DD2T Bare Pump Detailed Specifications

DD2T2. Engineering Data. Performance Bare Model Motor HP PSI RPM ACFM DD2T2 DD2T Bare Pump Detailed Specifications Sheet: 111 Cancels: 11July2001 DD2T2 Industrial Systems-Light Date: 25 April 2006 Davidson, NC 28036 Bore: 1.85" RPM: 3420 Motors are 60Hz/1PH Rated Stroke: 1.46" Inlet Size: 1/2" NPT Discharge Size: 1/4"

More information

Contents. Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty.

Contents. Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Contents Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Blackhawk Porto- Power is the premier collision repair equipment preferred by professional

More information

The Caldwell Group Fax

The Caldwell Group Fax Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.

More information

HYDRAULIC JACKS & TOOLS

HYDRAULIC JACKS & TOOLS HYDRAULIC JACKS & TOOLS 323 Hydraulic jacks & tools Table of contents Page A characteristic of this force-oriented hydraulic Hydraulic cylinders, single-acting program is the operating pressure which can

More information

THE TRACTOR AND/OR LOADER (IF EQUIPPED)

THE TRACTOR AND/OR LOADER (IF EQUIPPED) THE TRACTOR AND/OR LOADER (IF EQUIPPED) Read the tractor and/or loader operator s manual to learn how to operate your tractor and/or loader safely. Failure to do so could result in serious injury or death

More information

Coil Lifters and Upenders

Coil Lifters and Upenders Model 82-NC Narrow Coil C Hook Handles narrow coils with less coil edge damage. More durable than web slings. Light weight for easier handling. Built in guide handle for ease of coil positioning. Available

More information

WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00

WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00 EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices

More information

Shop Supplies. Shop Supplies. To order call: Fax:

Shop Supplies. Shop Supplies. To order call: Fax: 1 Hose Reels Jack Stands Air Hose Reels - Heavy Duty Steel Frame Corrosion resistant powder coat finish. Features spring tension brake and solid brass swivel. Mounts on floor, wall or workbench. REEL CAPACITY

More information

IC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006

IC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006 Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered

More information

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX: Yale HOISTS! To Avoid Injury: Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. 44 West Broadway Ave. P.O. Box

More information

R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH

R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH R.C. PLATH CO. Specialty Marine Hardware 2010 PLATH Specialty Marine Hardware Portland, Oregon The finest accessories for adding safety, pleasure, and value to your craft. No craft too small or large for

More information

Vehicles. Tools and Accessories. 980 Metrostar Tire Service Truck. tirehand Tire Manipulators. commander Tire Trucks. Tire Service Truck

Vehicles. Tools and Accessories. 980 Metrostar Tire Service Truck. tirehand Tire Manipulators. commander Tire Trucks. Tire Service Truck IMT Tire Service Vehicles Tools and Accessories PREDATOr Tire Service Truck 980 Metrostar Tire Service Truck commander Tire Trucks tirehand Tire Manipulators Tire Service Trucks This is a job for Predator

More information

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories 1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody

More information

Air Operated Post Drivers Hydraulic & Manual Post Pullers

Air Operated Post Drivers Hydraulic & Manual Post Pullers Air Operated Post Drivers Hydraulic & Manual Post Pullers Post Drivers and Pullers Will Drive and Pull a Multitude of Posts in Seconds Rhino Transports Serve as Both Transportation and Display and Conveniently

More information

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8 Cover Page Bottle Jacks Bottle Jacks - Steel lifting saddle engineered to hold load securely - Extension screw adjusts to accommodate desired work height - Built-in bypass system protects against ram over-travel

More information

Hydraulic Power for all Applications. The. World Class. Collection

Hydraulic Power for all Applications. The. World Class. Collection Hydraulic Power for all Applications The World Class Collection Enerpac bar Hydraulic s: World Class s All over the world, Enerpac cylinders provide force to major industries construction, shipbuilding,

More information

accessories SYSTEM ACCESSORIES

accessories SYSTEM ACCESSORIES SYSEM ACCESSORIES 66 SYSEM ACCESSORIES Introduction M1 - ort Control Manifold GA1 Gauge Adapters F3 3 Nipples G5-2.5 10,000 psi/ 700 bar Gauges ower ump HCA20 Hoses C213 Couplers ump with 4 ort Manifold

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face

Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt

More information

Industrial Manipulators

Industrial Manipulators Industrial Pow r Arm and Pow r Reach Industrial from Milwaukee Cylinder provide safe and efficient means to lift and locate loads up to 2,000 lbs. They use hydraulic power to lift, and manual operator

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

Heavy-Duty and Automotive. Service Equipment for Professionals

Heavy-Duty and Automotive. Service Equipment for Professionals Heavy-Duty and Automotive Service Equipment for Professionals The AFF Total Value Commitment American Forge & Foundry (AFF), in business since the mid 1900 s, is a longstanding privately owned distributor

More information

The Right Tool for Your Tough Job

The Right Tool for Your Tough Job SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications

More information

for CONSTRUCTION PROJECTS HOISTS & RIGGING PRODUCTS FOR CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways

for CONSTRUCTION PROJECTS HOISTS & RIGGING PRODUCTS FOR CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways A Complete Line of Products & Solutions for CONSTRUCTION PROJECTS HOISTS & RIGGING CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways TOUGH. RELIABLE. STRONG. Keeping Projects

More information

AUTOMOTIVE. Performance under Pressure

AUTOMOTIVE. Performance under Pressure AUTOMOTIVE LARZEP offers a wide range of jacks and automotive products including: Bottle jacks, High lift transmission jacks, Trolley jacks, Portable cranes, Hydraulic tables, Air service jacks, High tonnage

More information

SHUR-LIFT HYDRAULIC CYLINDERS

SHUR-LIFT HYDRAULIC CYLINDERS SHUR-LIFT HYDRAULIC CYLINDERS HIGH QUALITY COMPONENTS HIGH TOLERANCE MACHINING OUTSTANDING HIGH PRESSURE PERFORMANCE DESIGNED TO MEET THE REQUIREMENTS OF A WIDE VARIETY OF APPLICATIONS AGRICULTURAL INDUSTRIAL

More information

Backpack Power Unit. Applications. Features & Benefits

Backpack Power Unit. Applications. Features & Benefits Backpack Power Unit P 600 OB A revolution within rescue technology unlimited mobility for hydraulic rescue tools With the Backpack Power Unit P 600 OB any HURST High Pressure rescue tool can be made mobile.

More information

Sheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota

Sheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota Sheet Metal Connectors, Inc. 5850 Main Street N.E. Minneapolis, Minnesota 55432-5439 Sheet Metal Connectors, Inc. www.smcduct.com SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS MINNEAPOLIS, MN 5850 Main Street

More information

The World Class Brand

The World Class Brand WCC US The World Class Brand A complete range of quality high-pressure tools for all industrial applications, with local availability and after sales service anywhere in the world this is what has made

More information

POWER CLAMPING.

POWER CLAMPING. www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

HYDRAULIC TOOLS CATALOGUE 2013

HYDRAULIC TOOLS CATALOGUE 2013 HYDRAULIC TOOLS CATALOGUE 2013 TLP HYDRAULIC TOOLS welcomes you to its proud range of high pressure hydraulic tools and equipment. Based on many years of manufacturing and development, TLP offers a full

More information

Stud Tensioner. Leading provider of bolt loading & removal solutions

Stud Tensioner. Leading provider of bolt loading & removal solutions ZipTENSIONER Stud Tensioner For Subsea, Nuclear, Wind and other specialty applications Simultaneously tensions multiple fasteners Half the time required by conventional tensioners One piece installation

More information

Enerpac Hydraulic Presses

Enerpac Hydraulic Presses Enerpac Hydraulic es Enerpac Hydraulic es are available in a variety of capacities and sizes. The press frames are designed for maximum strength and durability. Strong frames and powerful high-pressure

More information

Heavy duty grade high force hydraulic products, systems and tools

Heavy duty grade high force hydraulic products, systems and tools HYDRAULIC PUMPS CYLINDERS JACKS PULLERS TOOLS Heavy duty grade high force hydraulic products, systems and tools PTM10E - Short Form Catalog 2 Please refer to our full line catalog for the complete range.

More information

Telescopic Transmission Jack

Telescopic Transmission Jack Telescopic Transmission Jack Operating Instructions & Parts Manual Model Number HW93720 Capacity 1/2 Ton Made in the USA SAVE THESE INSTRUCTIONS For your safety, read, understand, and follow the information

More information

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

The Caldwell Group Fax

The Caldwell Group Fax Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.

More information

Heat treated cylinder wall and chromed piston

Heat treated cylinder wall and chromed piston JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening

More information

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information