TRADEquip GARAGE EQUIPMENT

Size: px
Start display at page:

Download "TRADEquip GARAGE EQUIPMENT"

Transcription

1 Page 23 Industry Leaders Established 1977 For more information: Tel: Fax: Visit our website:

2 1 YEAR WARRANTY Bottle Jacks TOOJ951-2T TOOJ0504-5T TOOJ T TOOJ955-20T TOOJ956-30T TOOJ957-50T T 5 T 10 T 20 T 30 T 50 T min. height 158 mm 200 mm 200 mm 235 mm 255 mm 285 mm lift height without screw lift height with screw 90 mm 125 mm 125 mm 145 mm 150 mm 180 mm 150 mm 185 mm 185 mm 205 mm 210 mm n/a adj. height 60 mm 60 mm 60 mm 60 mm n/a n/a Select proper jack size according to this chart: ITEM RATED LIFTING RANGE MIN - MAX TOOJ951 2T mm TOOJ0504 5T mm TOOJ T mm TOOJ955 20T mm TOOJ956 30T mm TOOJ957 50T mm Jacks READ AND UNDERSTAND OPERATING INSTRUCTIONS BEFORE USE. Never go underneath a vehicle supported only by a jack. Use jack stands (also available in the range) immediately after lifting to support the vehicle should you intend going under the vehicle. Do not overload the jack beyond rated capacity. Use only on firm, stable, level surface. Do not move the vehicle while on a jack. Position on lift up areas of the vehicle as specified by the manufacturer. Do not make alterations to the jack. Failure to heed these warnings may result in injury and/or damage to the vehicle. Storage: Keep jack upright with release valve closed. Oil must be kept at correct level. Off Road Jacks 1.5M 1.2m 3.0 Ton Floor Jack 3.0 HEAVY DUTY 48 /1200 MM 60 /1500 MM min. height 154 mm 154 mm max height 1070 mm 1350 mm max. load 3 ton 3 ton weight 14 kg 15 kg off road jacks Do not exceed rated capacity Use only on hard, level surface Centre load on saddle Use the jack stands as a matched pairto support one end of the vehicle only min. height max. height TOOJ Quick lift - only one pump needed 145 mm 500 mm TOOT M TOOT M Page 24 Trade Brands SA

3 3.5 Ton Floor Jack rubber saddle pad working range gross weight length width including Castor Wheels saddle Ø lift height base height mm 52.5 kg mm mm 140 mm 380 mm 105 mm TOOJ Safety bypass system prevents damage Rubber saddle pad and handle bumper to protect the vehicle body Robust steel frame Low wheel base Two-piece full length removable handle for convenient transportation and compact storage Automatic overload protection system Swivel rear castors for easy maneuverability Dual pump for quick lift 1.5 Ton Aluminium Floor jack 2.0 Ton Aluminium Floor Jack 1.5 Polished & chromed cylinder rams enhanced mm working range by high performance seals. 19kg gross weight Polished inner cylinder walls extend the life Cast Aluminium frame of the seals by minimising abrasion and wear Great maneuverability Safety bypass system prevents damage Universal point release mechanism Easy to carry Automatic overload protection system Ideal lift tool for repairing and maintaining your vehicle mm working range 25kg gross weight Cast Aluminium frame Swivel rear castors for great maneuverability Safety bypass system prevents damage Universal point release mechanism Easy to carry Automatic overload protection system Ideal lift tool for repairing and maintaining your vehicle Long Chassis Service Jacks TOOJ T 5 T 10 T min. height 130 mm 150 mm 160 mm max height 600 mm 560 mm 560 mm saddle steel steel steel weight 65 kg 87 kg 129 kg HEAVY DUTY Ratcheting Axle Stands TOOJ Legged steel base combines integral bracing and welded corner supports for increased stability Convenient handle & column release Rigid construction - large saddle Ductile iron rack automatically locks into position when raised Safety ratchet design ensures stand remains locked under load Positive lock safely releases handle Large foot base for added support Jacks / Axle Stands 3 T 6 T min. height 285 mm 370 mm max height 425 mm 610 mm TOOJ TON TOOJ TON TOOJ TON TOOT TON TOOT TON Page 25

4 0.5 Ton Telescopic Gearbox Jack 5.0 Low Gearbox Jack Hydraulic & Telescopic Telescopic cylinder rams Low profile design assists use in constricted spaces Castor wheels aid in portability around the work area TOOJ TOOJ TON TOOJ TON Low profile design assists use in constricted spaces Castor wheels aid in portability around the work area min. height max height 0.5 T 850 mm 1790 mm 0.5 T 1.0 T min. height 200 mm 190 mm max height 670 mm 780 mm 2.0 Ton Engine Crane Foldable legs Ton Engine Crane Fixed 2.0 Jacks / Cranes / Engine Holders Ideal for moving, repairing, maintenence & assembly of engines 4 Adjustable legs provide greater stability Universal wheels provide easy maneuvering & positioning MCOC lifting height crane height crane length 0.5 Ton Engine Holder 2.0 T 2380 mm 1450 mm 1550 mm 0.5 MCOC lifting height crane height crane length Ideal for moving, repairing, maintenence & assembly of engines 4 Adjustable legs provide greater stability Universal wheels provide easy maneuvering & positioning 2.0 T 2380 mm 1450 mm 1550 mm 0.9 Ton Engine Holder 0.9 Used for safe handling & positioning of automotive engines Rotating head to easily position engine Universal wheels provide easy manoevering & positioning TOOT Used for safe handling & positioning of automotive engines Rotating head to easily position engine Universal wheels provide easy manoevering & positioning TOOT KG 900KG operating height 800 mm operating height 815 mm Page 26

5 0.5 Ton Engine Support 0.5 Straddles inner fender wells to support engine Adjustable to fit most vehicles Rubber foot pads prevent damage and holds load securely TOOT Length 0.5 T 1500 mm Steel Creeper Plastic Creeper TOOC TOOC LENGTH NET WEIGHT 914 mm 5.5 KG 80 L Oil Drain 80 L Oil Drain 80 LT For drum use LENGTH NET WEIGHT 914 mm 4.0 KG Easy extraction of engine oil Castors for easy maneuverability Engine Support / Creepers / Drains MCOS height range mm MCOS height range mm Page 27

6 75 L Parts Washer 75 L Removable Parts Washer 150 L Parts Washer pump and parts basket 75 LT pump and parts basket 75 LT 150 LT MCOS MCOS MCOS solvent capacity 45 L Tank size 710 x 482 x 940mm solvent capacity 90 L Hydraulic Shop Presses Ideal for straightening, bending & pressing parts. Pressure gauge shows working pressure Parts Washers / Shop Presses MCOP T COMMON MCOP T PROFESSIONAL MCOP T BLACK JACK MCOP T PROFESSIONAL MCOP T PROFESSIONAL MCOP T PROFESSIONAL CODE SHOP PRESS TABLE WIDTH WORKING RANGE MCOP T COMMON TYPE WITH GUAGE 400 MM MM MCOP T SLIDE HEAD INDUSTRIAL TABLE TOP ADJ. DIST. OF RAM 400 MM MM 180 MM MCOP T SLIDE HEAD INDUSTRIAL 500 MM MM 145 MM MCOP T SLIDE HEAD PROFESSIONAL 500 MM MM 200 MM MCOP T SLIDE HEAD PROFESSIONAL 530X142 MM MM 200 MM MCOP T SLIDE HEAD PROFESSIONAL 615X272 MM MM 280 MM Page 28

7 Spring Compressor 1.1 TOOC pipe bender with external pump SHOE SIZES MAX SPRING LOAD COMPRESSED SPRING Ø COMPRESSED LENGTH 12 Tripod stand MCOP Tyre Changers 560 mm 660 mm TOOJ982 Maximum rim: 560 mm TOOJ983 Maximum rim: 660 mm T 12,19, 25, 31, 38, 50 mm 400 mm 1.1 T mm Manual Wheel Balancer Hydraulic Pipe Bender SHOE SIZES SHOE SIZES 10 Ton Porta Power Body Repair Kit 10 Blow moulded case affords high protection to contents MCOJ T 12,19, 25, 31, 38, 50 mm 16 T 12 12,19, 25, 31, 38, 50, 63, 76 mm 135mm Stroke of ram 358mm Minimum height Includes Pump & ram, Spreader, Flat base, Rubber head, Wedge head, 90º Comb head, Serrated saddle, Male connector, Ram toe, Plunger toe, 100/250/455/685mm Extension tubes Variety of spreader accessories Electric Wheel Balancer Automatic Ruler 16 MCOP TON MCOP TON Spring Compressor / Pipe Benders / Body Repair Kit / Wheel Changers & Balancers TOOJ TOOJ Page 29

8 30 L Sand Blasting Cabinet L Sand Blasting Cabinet L Sand Blasting Cabinet 220 Sand Blasting Cabinets / Blasting Pots / Blasting Guns & Hood With foot pedal lights & gloves MCOS sand capacity ceramic nozzle min compressor 90 L Sand Blasting Pot 90 6kg 3.5mm 198 l/m 3hp belt drive With handles nozzle, pressure gauge, shut off valve, ceramic nozzle, hose, filling funnel, water trap and hood MCOS tank dimensions Hand Held Sand Blasting Gun mm ø x 508 mm (h) 708 l/m Transparent plastic top door light, gloves and gun MCOS dimensions work space min compressor 66 x 53 x 49 cm 56 x 46 x 28 cm 145 l/m 3 hp belt drive Hand Held Sand Blasting Gun 106 L Sand Blasting Pot 106 Heavy steel constructed frame Transparent glass viewing window Single door access light, gloves and gun MCOS dimensions work space min compressor With vacuum built in vacuum eliminates mask usage and recycles abrasives for reuse. seperates abrasives from debris MCOS tank dimensions Sand Blasting Hood 138 X 87 X 63 CM 145 X 87 X 63 CM 708 l/m 10 hp belt drive 380 mm Ø X 1041 mm (H) 708 l/m With 4 functions Lightweight plastic body 4 Extra nozzles 0.9L Tank MCOS With 4 nozzles: 2, 2.5, 3, 3.5mm Single action ease of operation Air inlet key wrench MCOS Durable fabric Large acrylic viewing window Reinforced ventilation panels MCOS Page 30

AUTOMOTIVE TOOLS & EQUIPMENT

AUTOMOTIVE TOOLS & EQUIPMENT AUTOMOTIVE TOOLS & EQUIPMENT Distributed By: TRADE-LOGIX PO BOX 1450 WATERDOWN, ON LOR 2HO www.trade-logix.com Email: sales@trade-logix.com Tel: (905) 581-2292 TABLE OF CONTENTS CREEPERS & SEATS Page 2

More information

CONTENTS ONE YEAR LIMITED WARRANTY

CONTENTS ONE YEAR LIMITED WARRANTY CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR

More information

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands

JACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series

More information

PROMO CODE PRODUCT DESCRIPTION PRODUCT CODE QTY TRADE VALUE

PROMO CODE PRODUCT DESCRIPTION PRODUCT CODE QTY TRADE VALUE February 2017 Affinity All Purpose Stopper Pack 8.99 The universal all-purpose polyester stopper is very easy to spread, easy to sand and has excellent adhesion to all substrates. The Bodyline mixing board

More information

COMMERCIAL LIFTING EQUIPMENT

COMMERCIAL LIFTING EQUIPMENT COMMERCIL LIFTING EQUIPMENT GLOSSRY Winntec from SIP have some important logos to look out for throughout this new catalogue. ll products are backed up by innovative European Design, and all come with

More information

HD-Series. Shop Equipment

HD-Series. Shop Equipment HD-Series Shop Equipment Reaching new heights Winntec (Est. 2002) is a manufacturer, esteemed developer and international supplier of high quality, efficient and reliable automotive workshop essentials,

More information

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2

More information

AUTOMOTIVE. Performance under Pressure

AUTOMOTIVE. Performance under Pressure AUTOMOTIVE LARZEP offers a wide range of jacks and automotive products including: Bottle jacks, High lift transmission jacks, Trolley jacks, Portable cranes, Hydraulic tables, Air service jacks, High tonnage

More information

$87995Reg Dlr. $1344

$87995Reg Dlr. $1344 3 TON LOW PROFILE PROFESSIONAL FLOOR JACK 300T Low pick up point of 3.75 High height of 21.5 Universal joint technology for precise release valve control Plungers use a U Cup design instead of O ring,

More information

Professional Products. Professional Results.

Professional Products. Professional Results. Professional Products. Professional Results. PROFESSIONAL PRODUCTS. PROFESSIONAL RESULTS. Established in 1963 American Forge & Foundry has built a long standing tradition of providing quality products,

More information

Lifting Table of Contents

Lifting Table of Contents Table of Contents Chain Hoist...D12 Compac Professional Lifting...D7 OTC Professional Lifting...D9 - D11 Ramps...D11 TEQ Correct Lifting...D3 TEQ Correct Professional Lifting...D3 - D6 Strongarm Professional

More information

INTEGRATED MARKETING (PTY) LTD

INTEGRATED MARKETING (PTY) LTD INTEGRATED MARKETING (PTY) LTD 13 Isando Road, Isando. Tel: (011) 974-2202/3 We focus on bringing innovative equipment for professional usage while pricing remains attractive. Together with our loyal customers,

More information

Contents. Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty.

Contents. Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Contents Hein-Werner lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Blackhawk Porto- Power is the premier collision repair equipment preferred by professional

More information

The AFF Total Value Commitment

The AFF Total Value Commitment The AFF Total Value Commitment Since 1963, American Forge and Foundry has provided a full selection of Forge-Tough hydraulic lifting products, lubrication tools, and general shop equipment. Serving Repair

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s & Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 324 3 Ton Floor SKU 964623 HEIHW93652 Min. Height: 5 Max. Height: 23-1/2 429 4 Ton Floor SKU

More information

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8 Cover Page Bottle Jacks Bottle Jacks - Steel lifting saddle engineered to hold load securely - Extension screw adjusts to accommodate desired work height - Built-in bypass system protects against ram over-travel

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS INNOVATIVE TOOLS. BETTER PRICES. QUALITY RESULTS. OEMTOOLS Brings You the Newest Innovation in Tools. 3- Hydraulic Floor Jack SKU 746260 169 99 24836 Min Height: 5-3/4" Max Height:

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS Floor s and Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 404 3 Ton Ratcheting Stand Set SKU 964601 94 HEIHW93503 Max. Height: 19 Ratchet Action Height

More information

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8

Bottle Jacks B-002D B-006D B-012D. Lift Range 7-1/8-13-5/ /8 8-1/2-16-1/4 8-7/8-17-3/8 9-1/2-18-7/8 9-1/2-18-3/4 11-1/8-18-3/ /8 Cover Page Bottle Jacks Bottle Jacks - Steel lifting saddle engineered to hold load securely - Extension screw adjusts to accommodate desired work height - Built-in bypass system protects against ram over-travel

More information

Heavy-Duty and Automotive. Service Equipment for Professionals

Heavy-Duty and Automotive. Service Equipment for Professionals Heavy-Duty and Automotive Service Equipment for Professionals The AFF Total Value Commitment American Forge & Foundry (AFF), in business since the mid 1900 s, is a longstanding privately owned distributor

More information

AUTOMOTIVE ACCESSORIES Below are examples of the merchandised range, please contact your sales rep for more details on how to order store concepts*.

AUTOMOTIVE ACCESSORIES Below are examples of the merchandised range, please contact your sales rep for more details on how to order store concepts*. AUTOMOTIVE ACCESSORIES Below are examples of the merchandised range, please contact your sales rep for more details on how to order store concepts*. *Concepts may change from time to time and without notice,

More information

shop presses new products equipment of choice for the professional

shop presses new products equipment of choice for the professional equipment of choice for the professional shop presses McAnax Hydraulic Shop Press Capacity: 12 Ton, 20 Ton, 50 Ton and 75 Ton Heavy duty steel H frame Ideal for rebuilding engines Great for straighting,

More information

Heat treated cylinder wall and chromed piston

Heat treated cylinder wall and chromed piston JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening

More information

Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty.

Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. CONTENTS WWW.SHINNFUAMERICA.COM Hein-Werner Lifting equipment is manufactured in the U.S.A. All products come with a 2 year warranty. Service Jacks 3 Wheel Dolly & Engine Stand 13 Manual & Air/Manual Service

More information

HD-Series. Wheel Service Essentials. Source: garage Meeusen

HD-Series. Wheel Service Essentials. Source: garage Meeusen HD-Series Wheel Service Essentials Source: garage Meeusen Jack dimensions Reaching new heights A = Min. Height (mm) B = Max. Height (mm) C = Width (mm) D = Length (mm) E = Height (mm) C A B D E Winntec

More information

HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity. HSWH-Pro series Hydraulic bottle jacks for professional deployment

HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity. HSWH-Pro series Hydraulic bottle jacks for professional deployment Vehicle jacks Hydraulic lifts/trestles HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity Jack with grooved lifting pad and screw extension Extremely durable cylinder Very low insertion

More information

TROLLEYS & HAND TRUCKS

TROLLEYS & HAND TRUCKS TROLLEYS & HAND TRUCKS DEXTERS PLATFORM TROLLEY PLATFORM TRUCK Heavy duty single platform trolley Powder coated steel framework MDF wooden deck and back 5 precision bearing rubber castors Tray Dimensions

More information

CASTORS. For more information: Tel: Fax: Visit our website:

CASTORS. For more information:   Tel: Fax: Visit our website: Page 163 Industry Leaders Established 1977 For more information: Email: sales@lgtools.co.za Tel: +2731 717 6800 Fax: +2731 717 6868 Visit our website: www.lgtools.co.za White Nylon White Nylon Loose Wheel

More information

WORKSHOP EQUIPMENT EOFY. S a le! BONUS BONUS MADE FOR THE TRADE OFFER OFFER EOFY $599. $189 End Of Financial Year BONUS!!! $649 $49 $499 $269

WORKSHOP EQUIPMENT EOFY. S a le! BONUS BONUS MADE FOR THE TRADE OFFER OFFER EOFY $599. $189 End Of Financial Year BONUS!!! $649 $49 $499 $269 WORKSHOP EQUIPMENT GARAGE JACKS BOTTLE JACKS EO F Y S a le! 1370mm 5 Drawer Steel Workbench 5 Drawers: 445W x 420D x 100Hmm 2 Shelves: 450W x 440Dmm HEAVY 1370W x 510D x 860Hmm DUTY Heavy duty steel construction

More information

2 Ton Low Profile Jack

2 Ton Low Profile Jack JACKS AND HYDRAULICS 3-1/2 Ton Hydraulic Floor SKU 746260 24836 169 Min. Height: 5-3/4" Max. Height: 19-3/4" Features Foot Pedal for Quick Lift 360 Swivel Casters for Easy Maneuvering Overload System Prevents

More information

GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP. Garage & Tyre Equipment CORK. Phone: Website:

GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP. Garage & Tyre Equipment CORK. Phone: Website: GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP Garage & Tyre Equipment CORK Two-Post Lifts PA-6140A Manual Lock Release PA-6140D Electric Lock Release P Our lifts are fitted with a low

More information

TROLLEYS. 1 Tier Trolley 08. Bin Trolley Tier Trolley 10. Cage Trolley 20. Folding Trolley 22. Multi Tier Trolley 12.

TROLLEYS. 1 Tier Trolley 08. Bin Trolley Tier Trolley 10. Cage Trolley 20. Folding Trolley 22. Multi Tier Trolley 12. 1 Tier Trolley 08 Bin Trolley 18 2 Tier Trolley 10 Cage Trolley 20 Multi Tier Trolley 12 Folding Trolley 22 Service Carts 14 Hand Trucks 23 Trolley Accessories 17 Scissor Lift Trolley 26 DEXTERS PLATFORM

More information

Jacks & Lifting Equipment

Jacks & Lifting Equipment Jacks & Lifting Equipment Bottle Jacks Stable and rigid jacks developed for the professional user. Equipped with a security valve to prevent overloading. The 3 and 5 ton models are supplied with a handy

More information

Tools. Acid Brush. Utility Brush. Brushes For Cleaning Copper Fittings G113 01/06/18

Tools. Acid Brush. Utility Brush. Brushes For Cleaning Copper Fittings G113 01/06/18 Acid Brush G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe dope 1/2" Acid

More information

Proven 5afety & per formo rtce for over 25 year 5,

Proven 5afety & per formo rtce for over 25 year 5, Proven 5afety & per formo rtce for over 25 year 5, Bottle Jacks Bottle Jacks - Steel lifting saddle engineered to hold load securely - Extension screw adjusts to accommodate desired work height - Built-in

More information

20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H.

20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H. ALL MONTEZUMA TOOL BOXES REQUIRE LIFT GATE SERVICE SKU 301610 MTZLIFTGATE 100 00 TOOL BOX COMBOS 17 DRAWER 20 DRAWER 23 DRAWER 17 Drawer Box with SKU 295815 MTZCOMBO1 4,49 + Overall Dimensions: 72 W x

More information

Air Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B

Air Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B 106 South Lake Court, Lexington, SC 29073 Tel: 803-356-4777 Fax: 803-356-4737 Air Compressor Pumps Best Pump Warranty In The Industry The Mi-T-M Pump Exchange Program provides pump replacement for the

More information

GENERATING SETS & WATER PUMPS

GENERATING SETS & WATER PUMPS GENERATING SETS & WATER PUMPS Page 41 Industry Leaders Established 1977 For more information: Email: sales@lgtools.co.za Tel: +2731 717 6800 Fax: +2731 717 6868 Visit our website: www.lgtools.co.za PETROL

More information

Automotech Ser vices Ltd

Automotech Ser vices Ltd Automotech Ser vices Ltd Specialists in vehicle lifts and garage equipment EST 1972 Issue 04-17 Call now: 01889 579945 www.automotechservices.co.uk Specialists in vehicle lifts and garage equipment Two

More information

PLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber

PLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber STORAGE Workbench Professional Workbench SKU 400312 49 21006 Weight Capacity: 1,200 lbs Overall Dimensions: 60 W x 31 D x34 H 13 Gauge Steel Construction Full Bottom Shelf Durable Powder Coated Finish

More information

BODY SHOP EQUIPMENT 225

BODY SHOP EQUIPMENT 225 CODE 715 BODY SHOP EQUIPMENT 225 Electrostatic painting equipment allows the paint to wrap around the product being sprayed. Electrostatic wrap is achieved by charging the paint with a static charge. Once

More information

WORKSHOP EQUIPMENT. People. Passion. Performance.

WORKSHOP EQUIPMENT. People. Passion. Performance. WORKSHOP EQUIPMENT WWWCPCOM People Passion Performance INTRODUCING CHICAGO PNEUMATIC At Chicago Pneumatic, our goal is to deliver best-in-class global service and local support to automotive service professionals

More information

Pneumatic tools and accessories. For trades and businesses.

Pneumatic tools and accessories. For trades and businesses. Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact

More information

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS

HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the

More information

The AFF Total Value Commitment

The AFF Total Value Commitment LIFTING EQUIPMENT The AFF Total Value Commitment Over the past 42 years, American Forge and Foundry (AFF) has provided value to you and your customers through our full selection of highest-quality, forge

More information

SHINN FU AUSTRALIA QUALITY IS OUR FIRST PRIORITY

SHINN FU AUSTRALIA QUALITY IS OUR FIRST PRIORITY SHINN FU QUALITY IS OUR FIRST PRIORITY www.proliftproducts.com.au www.shinnfu.com.au www.bvaonline.com.au LIGHTWEIGHT FOLDABLE AXLE JACK ULTRA LOW PROFILE SERVICE JACKS 23152 CAPACITY: 15/30 TONNE MIN

More information

Construction Maintenance Support Equipment Package

Construction Maintenance Support Equipment Package Construction Maintenance Support Equipment Package Construction Maintenance Support Equipment Package B&D offers a broad range of maintenance support equipment that will put your construction equipment

More information

the equipment specialists

the equipment specialists WORKSHOP ~ INDUSTRIAL ~ AUTOMOTIVE ~ STORAGE ~ ENGINEERING ~ AND MORE TRADEQUIP SALE VALID NOV / DEC 2010 ALL PRICES INCLUDE GST and the equipment specialists 270W 3 Speed Motor Stay Cool This Summer!

More information

WHEELED GOODS & CASTERS WHEELED GOODS & CASTERS

WHEELED GOODS & CASTERS WHEELED GOODS & CASTERS WHEEL BARROWS Kids WheelBarrow Plastic Tray red plastic tray tubular handle with vinyl hand grip solid rubber tire 6 Cu. Ft. WheelBarrow nose guard, leg brace, axle bracket plastic tray pneumatic tire

More information

SHINN FU AUSTRALIA QUALITY IS OUR FIRST PRIORITY

SHINN FU AUSTRALIA QUALITY IS OUR FIRST PRIORITY SHINN FU QUALITY IS OUR FIRST PRIORITY www.proliftproducts.com.au www.shinnfu.com.au www.bvaonline.com.au SHINN FU LIGHTWEIGHT FOLDABLE AXLE JACK ULTRA LOW PROFILE SERVICE JACKS 23152 CAPACITY: 15/30 TONNE

More information

ELECTRIC DIESEL AND OIL PUMPS

ELECTRIC DIESEL AND OIL PUMPS ELECTRIC DIESEL AND OIL PUMPS DC DIESEL PUMPS 78 AC DIESEL PUMPS 79 COMPACT ASSEMBLIES 80 DIESEL PUMP ACCESSORIES 81 ELECTRIC OIL PUMPS 82 ELECTRIC OIL PUMPS WITH ELECTRONIC PRESSURE SWITCH 83 EQUIPPED

More information

2100:- POWERFUL & LIGHTWEIGHT

2100:- POWERFUL & LIGHTWEIGHT POWERFUL & LIGHTWEIGHT 2100:- CP7749 1/2 Art nr 8941077491 Max torque (rev): 1,300 Nm Working torque (fwd): 135-704 Nm S2S technology and 3 setting positions Free speed: 7,000 rpm Twin hammer clutch Weight

More information

FORAGE WAGONS STRENGTH / QUALITY / PERFORMANCE

FORAGE WAGONS STRENGTH / QUALITY / PERFORMANCE FORAGE WAGONS STRENGTH / QUALITY / PERFORMANCE FORAGE WAGONS 7.8 25m 3 MULTICROP 7.8-20m 3 You expect your farm machinery to go the distance, and McIntosh delivers with Forage Wagons built to the highest

More information

Workshop. Equipment. People. Passion. Performance.

Workshop. Equipment. People. Passion. Performance. Workshop Equipment People. Passion. Performance. 1901 1904 1910 1911 1912 1912 1925 1925 1939 Our History Decades of innovation First single-valve pneumatic hammer First electric tools and railway speed

More information

PROFESSIONAL LIFTING EQUIPMENT DEPENDABLE PRODUCTS 50YEARS QUALITY SAFETY PERFORMANCE. Over

PROFESSIONAL LIFTING EQUIPMENT DEPENDABLE PRODUCTS 50YEARS QUALITY SAFETY PERFORMANCE. Over PROFESSIONAL LIFTING EQUIPMENT DEPENDABLE PRODUCTS 1964 QUALITY SAFETY PERFORMANCE PROFESSIONAL LIFTING EQUIPMENT Over 50YEARS WHY SHOULD YOU CHOOSE NORCO? PROFESSIONAL LIFTING EQUIPMENT Exceptional Customer

More information

Celebrating 50 Years of Excellence. 50YEARS PROFESSIONAL LIFTING EQUIPMENT.

Celebrating 50 Years of Excellence. 50YEARS PROFESSIONAL LIFTING EQUIPMENT. Celebrating 50 Years of Excellence. 1964 PROFESSIONAL LIFTING EQUIPMENT 50YEARS www.norcoindustries.com America s fastest and most durable AIR/HYDRAULIC AXLE JACKS 1 1964 PROFESSIONAL LIFTING EQUIPMENT

More information

Heavy Duty Engine Cranes

Heavy Duty Engine Cranes Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number Atd-7484 Atd-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model Atd-7484 Model Atd-7485 Atd Tools Inc. 160 Enterprise Drive, Wentzville,

More information

AUTOMOTIVE SERVICE TOOLS

AUTOMOTIVE SERVICE TOOLS AUTOMOTIVE SERVICE TOOLS FUEL INJECTION PRESSURE TESTER KIT OIL PRESSURE TESTER KIT RADIATOR PRESSURE TESTER KIT Including radiator cap pressure tester KW1900613 Suitable for Japanese,American and European

More information

HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS

HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile

More information

HAND TRUCKS HANDLER Brake Drum... 9 HOIST Cable Chain Lever HYDRAULIC TABLE CART... 29

HAND TRUCKS HANDLER Brake Drum... 9 HOIST Cable Chain Lever HYDRAULIC TABLE CART... 29 SHOP EQUIPMENT ALPHABETICAL Index A ADAPTER Floor Jack... 12 Fuel Tank... 12 ADAPTER HEADS Transmission... 12 AIR END LIFT... 9 AIR LIFT JACK... 9 AIR-HYDRAULIC Bottle JACKS... 17 Foot PUMP... 23 Service

More information

WORKSHOP EQUIPMENT SPECIAL EQUIPMENT

WORKSHOP EQUIPMENT SPECIAL EQUIPMENT WORKSHOP EQUIPMENT SPECIAL EQUIPMENT DUAL WHEEL DOLLY THE BEST OPTION TO INSTALL/ UNISTALL TRACTOR WHEELS ADJUSTABLE SUPPORTING ARM HYDRAULIC PUMP INCLUDED FOR A QUICK ADJUSTEMENT ALLOWED SIZE NET MIN.

More information

Part No. Description Part No. Description

Part No. Description Part No. Description Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle

More information

LIFTING EQUIPMENT FREE! $ FREE! FLOOR JACKS $ $ $ $ $ $ $

LIFTING EQUIPMENT FREE! $ FREE! FLOOR JACKS $ $ $ $ $ $ $ FLOO JACKS 71233A FASTJACK 71335 SUV JACK 71500G FASTJACK 71000D FASTJACK Floor Service Jacks Length Width NC-71233A 2 Ton 2-3/4" 20" 27-7/8" 14-5/8" 92 lbs NC-71335 3.5" Ton 4" 21-3/8" 28-1/2" 14-3/8"

More information

Workshop Compressors PREMIUM Series.

Workshop Compressors PREMIUM Series. Workshop Compressors PREMIUM Series www.kaeser.com What do you expect from your PREMIUM workshop compressor? The quality and effi ciency of technical work depends greatly on the tools and machinery used.

More information

CONTENTS P4 P5-6 P7 P8-9 P10 P11 P12-13 P14-15 P16 P17 SPECIALTY LIFTS BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS JACK STANDS

CONTENTS P4 P5-6 P7 P8-9 P10 P11 P12-13 P14-15 P16 P17 SPECIALTY LIFTS BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS JACK STANDS CONTENTS P4 P5-6 P7 P8-9 BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS SPECIALTY LIFTS P10 P11 P12-13 P14-15 JACK STANDS ENGINE CRANES & STANDS CREEPERS & SEATS SPECIALTY CREEPERS P16 P17

More information

Model Model Model 3650 Model 3614

Model Model Model 3650 Model 3614 Model 3601 Model 3662 Model 3650 Model 3614 Model 3675 Portable used fluid handling equipment and fuel caddies Collection equipment pressurized (self-evacuating)....... 170 Upright drains.....................................

More information

Vice / work mats. Vices With tubular clamping jaws and turntable. Workplace mats For dry and wet areas. Back. Front.

Vice / work mats. Vices With tubular clamping jaws and turntable. Workplace mats For dry and wet areas. Back. Front. Lifting platforms & pallet trucks Vice / work mats Vices With tubular clamping jaws and turntable Vice 12 mm 63012 Vice m 63010 Vice 17 mm 63017 Jaw width Min. clamping width Max. clamping width Clamping

More information

AIR SANDERS & POLISHERS

AIR SANDERS & POLISHERS AIR SANDERS & POLISHERS The most complete line of air finishing tools. Ingersoll Rand finishing tools are designed for long-life and swirl-free finishes. 49 4151-HL High Performance 150 mm Random Orbital

More information

SRD 5C & 6C Series Diamond Drill Rigs

SRD 5C & 6C Series Diamond Drill Rigs SRD 5C & 6C Series Diamond Drill Rigs About Us Solid Rigs is a drill rig and drilling tools manufacturer, that has been producing drill rigs and drilling tools for both the Civil and Mining industries

More information

PRESSURISED SANDBLASTER

PRESSURISED SANDBLASTER PRESSURISED SANDBLASTER MODEL NO: CPSB100 PART NO: 7640130 OPERATION & MAINTENANCE INSTRUCTIONS LS0510 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this

More information

PRODUCT OPERATING MANUAL

PRODUCT OPERATING MANUAL PRODUCT OPERATING MANUAL PANBLAST TM CS37 SUCTION BLAST CABINET Manual Number: ZVP PC 0069 00 SECTION 1. GENERAL INFORMATION 2. ASSEMBLY & INSTALLATION INSTRUCTIONS 3. OPERATING INSTRUCTIONS 4. MAINTENANCE

More information

HANDLING EQUIPMENT HANDLING EQUIPMENT

HANDLING EQUIPMENT HANDLING EQUIPMENT HANDLING EQUIPMENT 1337 STEEL HAND TROLLEYS REF 105TA4564 Hand protection The right hand trolley for every application to suit any budget! Hand protection With slide clamps! REF 108TA8369 Small hand trolley

More information

UFlex Storage System. Anodized aluminum. Thermal plastic bumper. A wealth of possible combinations STORAGE

UFlex Storage System. Anodized aluminum. Thermal plastic bumper. A wealth of possible combinations STORAGE Belintra's UFlex modular storage system was designed to be functional, durable, stable and expandable. Our unique storage system is made out of a high-quality anodized aluminium. UFlex offers an ergonomic

More information

PLASTIC BIN SUPPORT RACKS

PLASTIC BIN SUPPORT RACKS PLASTIC BIN SUPPORT RACKS Louvered bin panels can be wall-mounted, attached to back of shelving, mounted on benches, carts, inside cabinets, fastened to slotted angle components or used for service truck

More information

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

1.1/2 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) 1 - Air Impact Wrench (Twin Hammer) Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm

More information

CaM PAIG n. special offer autumn High-performance products. Designed for you!

CaM PAIG n. special offer autumn High-performance products. Designed for you! CaM PAIG n special offer autumn 2017 High-performance products. Designed for you! Impact wrenches Versatile tool ideal for all general repairs and maintenance applications 271 Nm of maximum torque in reverse

More information

GENERAL WORKSHOP REQUIREMENTS

GENERAL WORKSHOP REQUIREMENTS GENERAL WORKSHOP REQUIREMENTS Innovation is our mission! 1 PAGE VICES 676-677 SERVICE TROLLEYS 677 PLATFORM TROLLEY 677 PLATFORM 678 SUPPORTS 678 PAINT REQUIREMENTS 679 PAINTING STANDS 679-680 PALLET CAGE

More information

Jack 1 HYDRAULIC FLOOR JACK (L/DUTY) SOBAR HYDRAULIC BOTTLE JACK - STANDARD HYDRAULIC GARAGE JACK (H/DUTY) SOBAR JACK STAND LOW PROFILE SERVICE JACK

Jack 1 HYDRAULIC FLOOR JACK (L/DUTY) SOBAR HYDRAULIC BOTTLE JACK - STANDARD HYDRAULIC GARAGE JACK (H/DUTY) SOBAR JACK STAND LOW PROFILE SERVICE JACK Jack HYDRAULIC BOTTLE JACK - STANDARD Closed d Max. HYDRAULIC FLOOR JACK (L/DUTY) 72 2 Ton 2 300 6. 773 774 77 776 777 778 779 780 78 2 TON 3 TON TON 8 TON 0 TON TON TON 30 TON 0 TON 8 6 34 94 7 37 97

More information

08 WASTE OIL EQUIPMENT

08 WASTE OIL EQUIPMENT 08 WASTE OIL EQUIPMENT WASTE OIL GRAVITY RECEIVERS, 100 LITRES 98 WASTE OIL GRAVITY RECEIVERS, 70 LITRES 99 waste oil suction units, 100 litres 100 waste oil suction units, 24 and 70 litres 101 combined

More information

PROSTOCK CLASS. Infraction of rules will be decided by Race Officials. Number Plate

PROSTOCK CLASS. Infraction of rules will be decided by Race Officials. Number Plate PROSTOCK CLASS Tech Rules: Must have race receiver and needs to work (cruiser class: both driver & passenger must be able to hear) All four brakes must lock up or won t race. You will load up and go home

More information

AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)

AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0) AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems

More information

Application TF [0700] TF the mechanical king-pin axle steering system

Application TF [0700] TF the mechanical king-pin axle steering system Application TF the mechanical king-pin axle steering system TF Mechanical steering system The TF steering system for trailers with king-pin steered axles, is mainly installed when limited space for large

More information

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page

Roll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type

More information

MANUFACTURER S MANUFACTURER, INC. Professional Paint & Body Equipment MADE IN THE USA. Since Volume 6

MANUFACTURER S MANUFACTURER, INC. Professional Paint & Body Equipment MADE IN THE USA.   Since Volume 6 MADE IN THE USA MANUFACTURER S MANUFACTURER, INC. Since 1978 Professional Paint & Body Equipment Volume 6 www.mfgmfg.com 339 West Avenue I - Lancaster, CA 93534-800-237-6913 Fax 661-942-7753 Fender Stand

More information

JACKS AND HYDRAULICS

JACKS AND HYDRAULICS JACKS AND HYDRAULICS QUALITY - INNOVATION - VALU OMTOOLS Brings You the Newest Innovation in Tools. Low 757041 219 24838 The OMTOOLS Low is capable of lifting up to 2 tons with minimal effort. quipped

More information

INSTALLATION INSTRUCTIONS REAR STABILIZER BAR Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION 1 Threaded Plate Threaded

More information

Top Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight

Top Side Door Door Model Work Area Height Door Options Opening Opening Gun Options Weight FLOOR MODEL STEEL CABINETS 40403 40413 Standard Features for All Models 100 CFM dust collector included with all steel cabinets HD 14 gauge steel - welded seams Full width top door Optional additional

More information

STEERING AND SUSPENSION section 2

STEERING AND SUSPENSION section 2 STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three

More information

Dealer Stamp. Rollator (R6 and R8) Assembly & Operating Instructions

Dealer Stamp. Rollator (R6 and R8) Assembly & Operating Instructions The manufacturer reserves the right to alter without notice any weights, measurements or other technical data shown in this manual. All figures, measurements and capacities shown in this manual are approximate

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

OPERATOR S MANUAL Model 60010

OPERATOR S MANUAL Model 60010 OPERATOR S MANUAL Model 60010 10- TON SNAP LOCK PORTA POWER SET W/ WHEELED CASE PROFESSIONAL HYDRAULIC JACKS 1531 W. Mohawk Drive Phone 715-453-9602 Customer Service 800-995-2250 Tomahawk, WI 54487 Fax

More information

Breezy 250. Strong and durable... Good looks... Complete range of models and accessories... Great warranty and after-sales service...

Breezy 250. Strong and durable... Good looks... Complete range of models and accessories... Great warranty and after-sales service... Breezy 250 Breezy 250 Strong and durable... Good looks... Complete range of models and accessories... Great warranty and after-sales service... Breezy 250 shown with non-standard options Strong and durable

More information

Model No. 2000LJ. Min. Saddle Max. Saddle. Weight. Model No. 3000ESLE

Model No. 2000LJ. Min. Saddle Max. Saddle. Weight. Model No. 3000ESLE Combination Trolley Jack Safety System Min./Max. with Saddle: 160/445mm. Min./Max. without Saddle: 150/435mm. Length: 570mm. Features solid stainless steel locking pin to lock jack in raised position for

More information

Portable Equipment High-Pressure Heavy-Duty Grease Pumps

Portable Equipment High-Pressure Heavy-Duty Grease Pumps High-Pressure Heavy-Duty Grease Pumps 917 346P 987 Series 20 50:1 Air-Operated Double Acting The following models contain Lincoln s high pressure Series 20 grease pumps. Model 917 120 lb. Drum Will dispense

More information

Principal Ordered Liquidation of Autobody Shop and Welding / Metal Shop - Forklifts, Auto Frame Straightener, Paint Booths, Welders

Principal Ordered Liquidation of Autobody Shop and Welding / Metal Shop - Forklifts, Auto Frame Straightener, Paint Booths, Welders Capp International Principal Ordered Liquidation of Autobody Shop and Welding / Metal Shop - Forklifts, Auto Frame Straightener, Paint Booths, Welders Forklifts, Auto Frame Straightener, Paint Booths,

More information

Optimum design and performance Aluminium Trailer Cranes

Optimum design and performance Aluminium Trailer Cranes Optimum design and performance Aluminium Trailer Cranes Optimum design and powerful drive unit trend-setting manoeuvring drive uncompromising durability future-proof and environmentally friendly stable

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

SPECIFICATIONS CONTENTS:

SPECIFICATIONS CONTENTS: Model 3052A 1,100 Lbs Air Assist 2 Stage Transmission Jack INSTRUCTION MANUAL CONTENTS: Page 1 Specifications Page 2 Warning Information Page 3 Assembly Page 4 Operating Instructions Page 4 Preventative

More information

Narrow Aisle Drum Truck. Drum Handling. Three-in-one Drum Carrier. Drum Transporter and Pouring Stand. Drum Handling. Capacity 300kg UDL

Narrow Aisle Drum Truck. Drum Handling. Three-in-one Drum Carrier. Drum Transporter and Pouring Stand. Drum Handling. Capacity 300kg UDL 41 Narrow Aisle Drum Truck Capacity 300kg UDL For transport and dispensing from 210ltr steel or plastic drums. Overall width of truck is less than a standard 210 ltr drum Use as truck for transporting

More information