2 Exhaust Accessories
|
|
- Brandon York
- 6 years ago
- Views:
Transcription
1 2 Exhaust ccessories
2 U-olt Clamps Guillotine U-olt Clamps Flat and U-olt Clamps Round U-olt Clamps Welded Saddle U-olt Clamps ccuseal and Flat and Clamps ccuseal Clamps Flat and Clamps Wide and Clamps EasySeal Clamps ValuSeal Clamps TorcTite Clamps TorcTite Lap Clamps TorcTite utt Clamps V-and Clamps imensions Connectors Flared Connectors Type Flared Connectors Type Flared Connectors Type Flared Connectors Type Straight Connectors Reducing Connectors Tilt Cab Connectors Tilt Cab Connector with Wear Ring Threaded dapter Flexible Connectors Tube Connectors Stainless Steel Corrugated Connectors Flexible Hose Cut to Stainless Steel PolyLock luminized Flex Stainless Steel Flex Galvanized Flex Elbows Elbows Elbows Elbows Elbows Elbows Elbows Replacement Elbow for Freightliner Series imensions Tubes Tube Expander Splitter Tee dapter Tube Conventional Wye Tube Special Tubes Special luebird Tubes Special Ford Tubes Special Freightliner Tubes Special GMC /Chevrolet Tubes Special International /Navistar Tubes Stack Pipes Curved Stack Pipes and Tail Pipes Curved Stack Pipes ump Truck Stacks Custom Stacks " by 5" (152 mm by 127 mm) Monster Stacks Heat Guards rackets Stack Support rackets Universal Mounting racket Guard racket Kit Hangers Universal Swivel Hangers Universal Pipe Hangers Universal Muffler Hangers Miscellaneous ccessories Clamp Kits Universal Grab Hanger Rain Caps Exhaust Elbow/Pipe Shield Light eflectors Silent Rain Caps Mounting ands
3 Exhaust ccessories U-olt Clamps Guillotine U-olt Clamps Size Zinc Plated Plated 1.50 (38.10) 1.75 (44.45) 1.88 (47.75) 2.00 (50.80) 89541K 2.13 (54.10) 2.25 (57.15) 89542K 2.50 (63.50) 89543K 2.75 (69.85) 89544K 3.00 (76.20) 89545K 3.25 (82.55) 89546K 3.50 (88.90) 89547K 4.00 (101.60) 89548K 89548C 4.50 (114.30) (127.00) 89549K 89549C 6.00 (152.40) 89550K 89550C Flat and U-olt Clamps Size Zinc Plated Plated 3.00 (76.20) 89556K 89566K 3.25 (82.55) 3.50 (88.90) 89557K 4.00 (101.60) 89558K* 89568K 4.50 (114.30) 5.00 (127.00) 89559K* 89569K 6.00 (152.40) 89560K 89570K * vailable in bulk (50/carton) as Version vailable in both Zinc and plated Forms 360 seal vailable in both Zinc and plated 3/8" (9.5 mm) U-olt Selected sizes of zinc-plated bulk packs are available in single units or bulk packs. dd () to part number. Round U-olt Clamps Size 1.50 (38.10) 90927K 1.75 (44.45) 90928K 1.88 (47.75) 90914K 2.00 (50.80) 90929K 2.13 (54.10) 90930K 2.25 (57.15) 90915K 2.50 (63.50) 90916K 2.75 (69.85) K 3.00 (76.20) K 3.25 (82.55) 3.50 (88.90) K 4.00 (101.60) K 4.50 (114.30) 5.00 (127.00) K 6.00 (152.40) vailable in mild steel finish Standard 3/8" U-olt Welded Saddle U-olt Clamps Size 3.00 (76.20) (82.55) 3.50 (88.90) 4.00 (101.60) (114.30) 5.00 (127.00) (152.40) 3/8" (9.5 mm) U-olt Extra long U-olt for use with brackets Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-3
4 ccuseal and Flat and Clamps Exhaust ccessories ccuseal Clamps Size luminized Stainless 2.00 (50.80) ** 2.25 (57.15) ** 2.50 (63.50) ** 2.75 (69.85) ** 3.00 (76.20) * 3.50 (88.90) * 4.00 (101.60) * 4.50 (114.30) * 5.00 (127.00) * 6.00 (152.40) * right 430 Stainless Steel ** 409 Stainless Steel bands with metric hardware Clamp technology provides simple, effective way to replace U-bolt and guillotine clamps Creates over a ton of clamping force without crushing pipes, resulting in strong, serviceable joint Pre-assembled hardware Fast, easy and accurate installation slip clamp over slotted side of joint, insert mating pipe and torque to ft-lbs (54-81 N m) Flat and Clamps Size Stainless 2.00 (50.80) 89523W 2.75 (69.85) 89524W 3.00 (76.20) 89525W 3.25 (82.55) 3.50 (88.90) 89526W 4.00 (101.60) 89527W 4.50 (114.30) 5.00 (127.00) 89528W 6.00 (152.40) 89529W Older style seal clamp Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. 2-4 cumminsfiltration.com
5 Exhaust ccessories Wide and Clamps vailable in either the pre-formed TorcTite or flat EasySeal or ValuSeal style, these clamps stop leaky gaps between both overlapping and butt joints. The unique reaction block design results in a strong, tightly sealed and reliable exhaust joint without the need for extra gaskets. ll clamps come with longer bolts and preattached hardware. EasySeal Clamps Size Single ulk 40/Carton 2.00 (50.80) 89521K 2.25 (57.15) 89522K 2.50 (63.50) 89523K 2.75 (69.85) 89524K 3.00 (76.20) 89525K (82.55) 90951K 3.50 (88.90) 89526K (101.60) 89527K (114.30) 90464K 5.00 (127.00) 89528K (152.40) 89529K Flat, universal wide band clamp right 304 stainless steel band material looks great with chrome Cardboard skin packaging for easy display ValuSeal Clamps Size 4.00 (101.60) (127.00) Flat, universal wide band clamp Plain 304 stainless steel band material (same performance and strength as EasySeal ) Individually boxed with pre-attached hardware Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-5
6 TorcTite Clamps Exhaust ccessories TorcTite Lap Clamps Size luminized Steel Stainless Steel Single ulk 50/Carton* Single ulk 50/Carton* Polished Single** 2.00 (50.80) (57.15) (63.50) (69.85) (76.20) (88.90) (101.60) K 4.50 (114.30) (127.00) K 6.00 (152.40) K * Unassembled, nested in ten-packs with hardware, five ten-packs per carton ** Polished to match chrome elbow and stack finish luminized or Stainless Steel 360 sealing for overlapping tubes TorcTite utt Clamps Size luminized Steel Stainless Steel Single ulk 50/Carton* Single ulk 50/Carton* 2.00 (50.80) (57.15) (63.50) (69.85) (76.20) (88.90) (101.60) (114.30) (127.00) (152.40) * Unassembled, nested in ten-packs with hardware, five ten-packs per carton luminized or Stainless Steel Positive clamping action for equal sized tubes without overlap Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. 2-6 cumminsfiltration.com
7 Exhaust ccessories V-and Clamps V-and Clamps are made of Type 321 stainless steel The function of the V-and Clamp is to connect the manifold or turbocharger to the exhaust system These clamps are designed to accommodate the majority of engine applications and are available in a variety of sizes F C Typical Tube E Max. Flange Tube * imensions 1.00 (25.1) (7.14) 4.00 (10.16) Part Cummins Nominal (1.22) (11.30) pplication 0.75 (19.05) (7.14) (5.26) C etroit Nominal (1.22) (6.40) imensions E F Max. Flange 2.75 (69.85) 89571K Cummins (81.79) (6.66) 0.85 (21.59) 0.14 (3.56) (1.27) 3.13 (79.50) 3.00 (76.20) 89530K Ford 9HT-5I (98.30) (10.80) 0.88 (22.35) 0.31 (7.87) (1.91) 3.75 (95.25) 3.00 (76.20) 89505K 6V (97.03) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 3.70 (93.98) 3.00 (76.20) 89500K Cummins V903, Ford 370 & 429, E5HZ (98.55) (10.16) 0.88 (22.35) 0.28 (7.11) (1.27) 3.76 (95.50) 3.13 (79.50) 89511K OE Muffler (100.58) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 3.84 (97.54) 3.50 (88.90) 89573K Cummins C (104.69) (6.66) 0.67 (17.02) 0.14 (3.56) (1.27) 4.03 (102.36) Cat 3208T, Ford 6.6, 7.8, 3.50 (88.90) 89531K E2HT (106.43) (10.16) 0.88 (22.35) 0.28 (7.11) (1.27) 4.07 (103.38) 3.50 (88.90) 89512K IH T466 & Connector Ends (109.47) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 4.19 (106.43) 3.50 (88.90) 89506K 8V (114.30) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 4.38 (111.25) 3.50 (88.90) 89501K Cummins VT (107.95) (10.16) 0.88 (22.35) 0.28 (7.11) (1.27) 4.16 (105.66) 4.00 (101.60) 89508K 8.2N (103.12) (6.07) 0.88 (22.35) 0.29 (7.37) (1.91) 3.94 (100.08) Cat 3126T, Cat 3176T, 4.00 (101.60) 89520K Cummins L10, Cummins M (120.65) (10.16) 0.88 (22.35) 0.28 (7.11) (1.27) 4.63 (117.60) 4.00 (101.60) 89509K 8.2T, GM (120.65) (4.01) 0.88 (22.35) 0.31 (7.87) (1.91) 4.63 (117.60) 4.00 (101.60) 89532K Mack 11ME (125.48) (4.60) 0.75 (19.05) 0.28 (7.11) (1.58) 4.82 (122.43) 4.00 (101.60) 89502K Switzer 4LE, 4LE 4LH, 4LS (114.30) (6.66) 0.75 (19.05) 0.14 (3.56) (1.27) 4.41 (112.01) 4.00 (101.60) 89513K Connector Ends (122.17) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 4.69 (119.13) 4.00 (101.60) 89507K (124.71) (7.44) 1.13 (28.70) 0.30 (7.62) (2.29) 4.79 (121.67) 4.00 (101.60) 89533K Mack 48RU (117.09) (3.96) 0.75 (19.05) 0.22 (5.59) (1.27) 4.49 (114.05) 4.88 (123.95) 89510K 8V71T, 6V92T, 8V92T (133.35) (6.66) 0.75 (19.05) 0.14 (3.56) (1.27) 5.16 (131.06) 5.00 (127.00) 89503K Cummins T50 Turbo, M (149.35) (10.16) 0.88 (22.35) 0.28 (7.11) (1.27) 5.79 (147.07) 5.00 (127.00) 89514K Connector Ends (147.57) (5.26) 0.88 (22.35) 0.28 (7.11) (2.03) 5.69 (144.53) 5.00 (127.00) 90530K 8V71 Special Manifold (149.10) (9.27) 0.88 (22.35) 0.30 (7.62) (1.27) 5.75 (146.05) 5.25 (133.35) 90531K 8V (150.37) (7.11) 0.88 (22.35) 0.30 (7.62) (2.29) 5.83 (148.08) * o not use this diameter to select a V-and Clamp. It refers to a typical exhaust piping size which can vary by vehicle or engine model (1.57) (1.57) ll dimensions are in inches (millimeters) (1.57) (1.57) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-7
8 Connectors Exhaust ccessories 16 gauge aluminized steel esigned for use with V-and Clamps Standard 20 lip angle Flared Connectors Type 1 imensions Part () (I..) C () Clamp* pplication 89955K 3.00 (76.20) 3.00 (76.20) 3.63 (92.20) 4.00 (101.60) K 6V K 3.00 (76.20) 3.13 (79.50) 3.63 (92.20) 4.75 (120.65) K 89958K 3.50 (88.90) 3.50 (88.90) 4.25 (107.95) 4.00 (101.60) 22 E 89506K 8V K 89959K 4.00 (101.60) 4.00 (101.60) 4.50 (114.30) 4.75 (120.65) K Cummins VT K 4.00 (101.60) 4.00 (101.60) 4.75 (120.65) 4.00 (101.60) K 6-71, 12V K 5.00 (127.00) 5.00 (127.00) 5.50 (139.70) 4.75 (120.65) K E C * See page 2-7 for clamp details Flared Connectors Type 2 E imensions Part () () C () E Clamp* pplication C 89971K** For iresearch Turbos 5.02 (127.51) 4.50 (114.30) 4.81 (122.17) * See page 2-7 for clamp details ** Cast steel Flared Connectors Type (49.28) K 8V-71T, 16V-71T, 6V-92T, 8V-92T,16V-92T imensions Part () () C () E Clamp* pplication (63.50) I 2.50 (63.50) I 3.10 (78.74) 4.00 (101.60) K Cummins (88.90) 3.50 (88.90) K 53 Series 89962K 3.50 (88.90) 4.00 (101.60) 3.50 (88.90) K Cat 3208-T 89963K 4.00 (101.60) 5.00 (127.00) K etroit iesel 89964K 4.00 (101.60) 4.00 (101.60) 4.63 (117.60) 3.50 (88.90) K 8.2 Liter T, Cat 3126T 89965K 4.00 (101.60) 4.50 (114.30) 5.00 (127.00) K Cummins 250, L K 5.00 (127.00) 5.50 (139.70) 5.00 (127.00) K Cummins 89967K 5.75 (146.05) 3.00 (76.20) K (127.00) I 5.00 (127.00) I 5.50 (139.70) 3.00 (76.20) 22 T-50 Turbo Charger, Cummins M11 E C * See page 2-7 for clamp details Flared Connectors Type 4 imensions E Part (I..) C () (76.20) 3.75 (95.25) 1.00 (25.40) (88.90) 4.25 (107.95) 1.00 (25.40) (101.60) 4.75 (120.65) 1.00 (25.40) (127.00) 5.93 (150.62) 0.75 (19.05) 20 E C * See page 2-7 for clamp details Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. 2-8 cumminsfiltration.com
9 Exhaust ccessories Connectors Straight Connectors 16 gauge aluminized steel - eaded - - I.. I.. - I (47.75) 2.00 (50.80) (63.50) (69.85) (76.20) (15.2) I (15.2) 3.50 (88.90) (101.60) (127.00) (152.40) (15.2) I.. ll dimensions are in inches (centimeters) 6.0 (15.2) I.. Reducing Connectors 16 gauge aluminized steel I.. - I.. I I (63.50) x 2.00 (50.80) (63.50) x 2.25 (57.15) (76.20) x 2.50 (63.50) (88.90) x 3.00 (76.20) (101.60) x 3.00 (76.20) (101.60) x 3.50 (88.90) (114.30) x 4.00 (101.60) (127.00) x 4.00 (101.60) (152.40) x 4.00 (101.60) (152.40) x 5.00 (127.00) I (15.2) I.. I (15.2) I (15.2) 6.0 (15.2) ll dimensions are in inches (centimeters) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-9
10 Connectors Exhaust ccessories Tilt Cab Connectors 16 gauge aluminized steel Part escription ia. ia. Top Connectors 4.00 (101.60) I (144.78) Slotted 5.00 (127.00) 5.70 (144.78) Slotted 5.00 (127.00) (292.10) Unslotted ottom Connectors 4.00 (101.60) I (116.84) Slotted 5.00 (127.00) I (154.94) Slotted 5.00 (127.00) 6.20 (157.48) Unslotted Top Connector (shown unslotted) ottom Connector (shown unslotted) Tilt Cab Connector with Wear Ring luminized steel 16 gauge with 10 gauge wear ring ia. Part escription 5.00 (127.00) 7.90 (200.66) 89979K Unslotted Threaded dapter 16 gauge aluminized steel NPT Thread Part 4.00 (101.60) 4.00 (101.60) 6.00 (152.40) 90470K NPT L Flexible Connectors Higher tolerance for vibration than standard flexible hose Heavy duty aluminized or stainless steel I.. Style Style C (Stainless Corrugated) Part C 4.00 (101.60) I (247.65) 90453K H/ luminized Connector - I (101.60) (457.20) 89740K 5.00 (127.00) (457.20) 89742K Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
11 Exhaust ccessories Connectors Tube Connectors Provide leaktight, reusable joint where overlapping tube joints are not possible Can be installed in as little as 1.5" straight section of tubing esigned for welded installation Kit includes two flanges and the V-and clamp Size Clamp Clamp & Flange Kit 3.50 (88.90) 89512K 90891K 4.00 (101.60) 89513K 90892K 5.00 (127.00) 89503K 90893K Stainless Steel Corrugated Connectors Corrugated hose provides leak-proof flexible joints for critical applications Maximum bend is 10 Stainless steel corrugated with aluminized steel connector ends Higher tolerance for vibration than flexible hose vailable in I..-I.. or -I. 18" (457 mm) in length Size I.. - I.. - I (50.80) 89791K 2.50 (63.50) 89792K 3.00 (76.20) 89786K 89794K 3.50 (88.90) 89787K 4.00 (101.60) 89788K 89796K 5.00 (127.00) 89789K 89797K 6.00 (152.40) 89790K 89798K or I.. 18 (457) ll dimensions are in inches (milliimeters) I.. Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-11
12 Flexible Hose Cut to Exhaust ccessories Exclusive cut feature provides locked ends with no metal burrs Individual lengths of bulk material shown above Measured as fully extended lengths Galvanized Part Stainless luminized 3.00 (76.20) (304.80) 89612K 3.00 (76.20) (457.20) 89600K 89613K 3.00 (76.20) (609.60) 89601K 89614K 3.00 (76.20) (914.40) 89602K 89615K 3.50 (88.90) (304.80) 89616K 3.50 (88.90) (457.20) 89603K 89617K 3.50 (88.90) (609.60) 89604K 89618K 3.50 (88.90) (914.40) 89605K 89619K 4.00 (101.60) (304.80) 90903K 89726K 89308K 4.00 (101.60) (457.20) 89606K 89727K 89309K 4.00 (101.60) (609.60) 89607K 89728K 89310K 4.00 (101.60) (914.40) 89608K 89729K 89311K 4.00 (101.60) ( ) K K 5.00 (127.00) (304.80) 90902K 89730K 5.00 (127.00) (457.20) 89609K 89731K 89313K 5.00 (127.00) (609.60) 89610K 89732K 89314K 5.00 (127.00) (914.40) 89611K 89733K 89701K 5.00 (127.00) ( ) K K Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
13 Exhaust ccessories 10' and 25' Flexible Hose vailable in stainless, aluminized and galvanized steel Measured in a partially compressed state. You receive 10% more length than competitive products sold in fully extended lengths! Flex should be installed in a straight position and not be used as an elbow est Stainless Steel PolyLock Engineered to be cut to length Requires no tack welds to cut Will not unravel after cutting est Stainless Steel Flex Engineered to provide maximum durability and corrosion resistance. Capable of withstanding high temperatures, such as those found in gas and diesel engine applications. 10' 25' Standard Flex PolyLock Standard Flex PolyLock 2.00 (50.80) 89620K 2.50 (63.50) 89621K 89719K 3.00 (76.20) 89622K 89721K 3.50 (88.90) 89623K 89722K 4.00 (101.60) 89624K 89624P 89723K 89723P 5.00 (127.00) 89625K 89625P 89724K 89724P 6.00 (152.40) 89626K 89725K 8.00 (203.20) Q78464 etter luminized Flex Provides a high level of durability and oxidation resistance. Withstands high temperatures such as those found in diesel engine applications. 10' Part Standard Flex 25' Part 2.00 (50.80) 90521K 3.00 (76.20) 90191K 90213K 3.50 (88.90) 90206K 90214K 4.00 (101.60) 89759K 89760K 5.00 (127.00) 89772K 89773K Economy Galvanized Flex urable hose with fair oxidation resistance. Capable of withstanding temperatures of up to 600 F (316 C). Suitable for light duty applications. 10' Part 25' Standard Flex Standard Flex Light uty Flex 2.00 (50.80) 89640K 89708K 89708L 2.25 (57.15) 89648K 89709K 89709L 2.50 (63.50) 89641K 89710K 89710L 2.75 (69.85) 89647K 3.00 (76.20) 89642K 89712K 89712L 3.50 (88.90) 89643K 89713K 89713L 4.00 (101.60) 89644K 89714K 89714L 4.50 (114.30) 90519K 5.00 (127.00) 89645K 89715K 89715L 6.00 (152.40) 89646K 89716K 89716L 8.00 (203.20) Q78465 Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-13
14 Elbows Exhaust ccessories 15 Elbows For use in tight places where clearance is a problem 16 gauge aluminized steel Leg R Center Line Radius luminized 3.00 (76.20) 2.59 (65.79) 4.50 (114.30) (88.90) 2.79 (70.87) 6.00 (152.40) (101.60) 3.29 (83.57) 6.00 (152.40) (127.00) 4.55 (115.57) 8.00 (203.20) R 30 Elbows 16 gauge aluminized steel Leg R Center Line Radius I (76.20) 3.30 (93.82) 3.00 (76.20) (88.90) 3.57 (90.67) 4.00 (101.60) (101.60) 4.21 (106.93) 4.50 (114.30) (127.00) 4.97 (126.24) 5.50 (139.70) R I. or 45 Elbows right, exceptional quality chrome or 16 gauge aluminized steel Leg R Center Line Radius luminized I luminized 2.00 (50.80) 4.16 (105.66) 4.00 (101.60) (57.15) 4.26 (108.20) 4.25 (107.95) (63.50) 4.26 (108.20) 4.25 (107.95) (69.85) 5.03 (127.76) 5.50 (139.70) (76.20) 5.50 (139.70) 6.00 (152.40) (76.20) 9.50 (241.30) 6.00 (152.40) (88.90) 6.00 (152.40) 6.00 (152.40) (88.90) (254.00) 6.00 (152.40) (101.60) 6.50 (165.10) 6.00 (152.40) C (101.60) (279.40) 6.00 (152.40) C (114.30) 7.27 (184.66) 6.69 (169.93) (127.00) 7.28 (184.91) 5.50 (139.70) C (127.00) (381.00) 8.00 (203.20) C (152.40) (448.31) (254.00) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. R I. or 2-14 cumminsfiltration.com
15 Exhaust ccessories Elbows 60 Elbows 16 gauge aluminized steel Leg R Center Line Radius I (76.20) 6.46 (164.08) 6.00 (152.40) (88.90) 5.81 (147.57) 4.00 (101.60) (101.60) 6.90 (175.26) 5.00 (127.00) (127.00) 8.00 (203.20) 5.50 (139.70) R I. or 70 Elbows 16 gauge aluminized steel Leg Leg R Center Line Radius I (88.90) 7.70 (195.58) 7.70 (195.58) 6.00 (152.40) (101.60) 8.20 (208.28) 8.20 (208.28) 6.00 (152.40) (127.00) (279.40) 7.50 (190.50) 5.50 (139.70) R I. 70 Elbows right, exceptional quality chrome or 16 gauge aluminized steel Leg Leg R Center Line Radius luminized 5.00 (127.00)* (279.40) 7.50 (190.50) 5.50 (139.70) C * Peterbilt P/N R Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-15
16 Elbows Exhaust ccessories 90 Elbows Leg Leg R Center Line Radius luminized (50.80) 6.50 (165.10) 6.50 (165.10) 4.00 (101.60) (50.80) 9.00 (228.60) 9.00 (228.60) 4.00 (101.60) (57.15) 6.50 (165.10) 6.50 (165.10) 4.25 (107.95) (57.15) 9.00 (228.60) 9.00 (228.60) 4.25 (107.95) (63.50) 6.75 (171.45) 6.75 (171.45) 4.25 (107.95) (63.50) 9.00 (228.60) 9.00 (228.60) 4.25 (107.95) (69.85) 6.50 (165.10) 6.50 (165.10) 3.75 (95.25) (69.85) 9.00 (228.60) 9.00 (228.60) 5.50 (139.70) (76.20) 9.00 (228.60) 9.00 (228.60) 6.00 (152.40) (76.20) (279.40) (279.40) 6.00 (152.40) (76.20) (347.98) (347.98) 6.00 (152.40) (88.90) 9.00 (228.60) 9.00 (228.60) 6.00 (152.40) (88.90) (279.40) (279.40) 6.00 (152.40) (88.90) (381.00) (381.00) 6.00 (152.40) (101.60) (254.00) (254.00) 6.00 (152.40) (101.60) (304.80) (304.80) 6.00 (152.40) (101.60) (373.38) (373.38) 6.00 (152.40) (101.60) (457.20) (457.20) 6.00 (152.40) C 4.00 (101.60) (576.58) (754.38) 6.00 (152.40) (114.30) (279.40) (279.40) 6.69 (169.93) (127.00) (254.00) (254.00) 8.00 (203.20) (127.00) (330.20) (330.20) 8.00 (203.20) (127.00) (381.00) (381.00) 8.00 (203.20) C 5.00 (127.00) (438.15) (438.15) 8.00 (203.20) (127.00) (571.50) (571.50) 8.00 (203.20) (152.40) (381.00) (381.00) (254.00) (152.40) (508.00) (508.00) (254.00) Short Radius Elbows 3.00 (76.20) 3.50 (88.90) 3.50 (88.90) 3.00 (76.20) (76.20) 6.00 (152.40) 6.00 (152.40) 3.00 (76.20) (88.90) 4.50 (114.30) 4.50 (114.30) 4.00 (101.60) (88.90) 8.00 (203.20) 8.00 (203.20) 4.00 (101.60) (101.60) 5.00 (127.00) 5.00 (127.00) 4.50 (114.30) (101.60) 6.50 (165.10) 6.50 (165.10) 4.50 (114.30) (101.60) 8.50 (215.90) 8.50 (215.90) 4.50 (114.30) (101.60) 7.70 (195.58) 9.70 (246.38) 4.50 (114.30) (101.60) 9.00 (228.60) (381.00) 4.50 (114.30) (114.30) 6.00 (152.40) 6.00 (152.40) 5.50 (139.70) (127.00) 6.00 (152.40) 6.00 (152.40) 5.50 (139.70) (127.00) 6.50 (165.10) 6.50 (165.10) 5.50 (139.70) 90455C 5.00 (127.00) 7.50 (190.50) (342.90) 5.50 (139.70) (127.00) 8.50 (215.90) 8.50 (215.90) 5.50 (139.70) (127.00) 9.70 (246.38) (398.78) 5.50 (139.70) (127.00) (266.70) (266.70) 5.50 (139.70) (152.40) 6.50 (165.10) 6.50 (165.10) 6.00 (152.40) right, exceptional quality chrome or 16 gauge aluminized steel R For use in tight places where clearance is a problem right, exceptional quality chrome or 16 gauge aluminized steel R Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
17 Exhaust ccessories Elbows 90 Elbows One end, one end I.. slotted right, exceptional quality chrome or 16 gauge aluminized steel R Leg Leg R Center Line Radius luminized I (50.80) 6.50 (165.10) 6.50 (165.10) 4.00 (101.60) (50.80) 9.00 (228.60) 9.00 (228.60) 4.00 (101.60) (57.15) 6.50 (165.10) 6.50 (165.10) 4.25 (107.95) (57.15) 9.00 (228.60) 9.00 (228.60) 4.25 (107.95) (63.50) 6.75 (171.45) 6.75 (171.45) 4.25 (107.95) (63.50) 9.00 (228.60) 9.00 (228.60) 4.25 (107.95) (69.85) 6.50 (165.10) 6.50 (165.10) 3.75 (95.25) (69.85) 9.00 (228.60) 9.00 (228.60) 5.50 (139.70) (76.20) 6.00 (152.40) 6.00 (152.40) 3.00 (76.20) (76.20) 9.00 (228.60) 9.00 (228.60) 6.00 (152.40) (76.20) (279.40) (279.40) 6.00 (152.40) (76.20) (347.98) (347.98) 6.00 (152.40) (88.90) 8.00 (203.20) 8.00 (203.20) 4.00 (101.60) (88.90) 9.00 (228.60) 9.00 (228.60) 6.00 (152.40) (88.90) (279.40) (279.40) 6.00 (152.40) (88.90) (381.00) (381.00) 6.00 (152.40) (101.60) 6.50 (165.10) 6.50 (165.10) 4.50 (114.30) 89923* 89923C 4.00 (101.60) 8.50 (215.90) 8.50 (215.90) 4.50 (114.30) (101.60) (254.00) (254.00) 6.00 (152.40) C 4.00 (101.60) (304.80) (304.80) 6.00 (152.40) C 4.00 (101.60) (373.38) (373.38) 6.00 (152.40) (101.60) (457.20) (457.20) 6.00 (152.40) C 4.00 (101.60) 7.70 (195.58) 9.70 (246.38) 4.50 (114.30) (101.60) 9.00 (228.60) (381.00) 4.50 (114.30) (101.60) (576.58) (754.38) 6.00 (152.40) (114.30) (279.40) (279.40) 6.69 (169.93) (127.00) 8.50 (215.90) 8.50 (215.90) 5.50 (139.70) C 5.00 (127.00) (266.70) (266.70) 5.50 (139.70) (127.00) (254.00) (254.00) 8.00 (203.20) C 5.00 (127.00) (330.20) (330.20) 8.00 (203.20) C 5.00 (127.00) (381.00) (381.00) 8.00 (203.20) C 5.00 (127.00) (438.15) (438.15) 8.00 (203.20) C 5.00 (127.00) (571.50) (571.50) 8.00 (203.20) (127.00) 7.50 (190.50) (342.90) 5.50 (139.70) (127.00) 9.70 (246.38) (398.78) 5.50 (139.70) (127.00) (254.00) (558.80) 8.00 (203.20) (152.40) (381.00) (381.00) (254.00) (152.40) (508.00) (508.00) (254.00) C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-17
18 Replacement Elbow for Freightliner Series Exhaust ccessories Freightliner MY Century Series S/T Replacement Mufflers and Muffler Mounting Elbows Top quality construction that meets or exceeds OE requirements First-fit aftermarket product at an affordable price Use our clamps with muffler and/or elbow Q imensions 2.07 (52.58) 8.38 (212.85) R 5.5 (139.7) 1.00 (25.40) 2.00 (50.80) 1 Hole.56 (14.22) No (279.40) 8.5 (215.9) 5.06 (128.52) ll dimensions are in inches (millimeters) R.37 (9.40) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
19 Exhaust ccessories Tubes Tube Expander Rounds muffler and tubing ends to original size and shape with ease Removes U-bolt crimps Saves exhaust installation time Operates with impact wrench Not designed to swage tubing Tube Size luminized 4.00 (101.60) 90907K 5.00 (127.00) 90908K Splitter Tee dapter Tube Converts a single system exhaust pipe into a dual system See Special Muffler section for Splitter Tee Mufflers () (I..) C luminized 4.00 (101.60) 4.00 (101.60) (285.75) (406.40) (127.00) 5.00 (127.00) (355.60) (635.00) C C Conventional Wye Tube O.E. replacement on various models of trucks Can be used to convert dual exhaust to single See Special Muffler section for Wye Connector Mufflers () (I..) C 4.00 (101.60) 3.00 (76.20) 9.00 (228.60) (381.00) (101.60) 4.00 (101.60) 7.00 (177.80) (381.00) (127.00) 5.00 (127.00) 9.00 (228.60) (381.00) C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-19
20 Special Tubes Exhaust ccessories Special luebird Tubes luebird pplication , , , (76.20) Exhaust Pipe , , (101.60) Tail Pipe (101.60) Tail Pipe Special Ford Tubes 20 Pyrometer Fitting Ford pplication 8HZ5246M 5.00 (127.00) NTC Turbo E7HZ-5246N 4.00 (101.60) Exhaust Pipe E7HZ (101.60) School us Tail Pipe E2HZ-5231, E7HZ-5246G 3.50 (88.90) Exhaust Pipe E7HZ5246K 3.50 (88.90) Exhaust Pipe Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
21 Exhaust ccessories Special Tubes Special Freightliner Tubes C Freightliner pplication luminized (127.00) Exhaust Elbow (127.00) Exhaust Elbow 90984C (127.00) RH Vertical Elbow Special GMC /Chevrolet Tubes GM pplication (101.60) Tail Pipe (101.60) Tail Pipe (101.60) Over xle us Pipe Special International /Navistar Tubes 140 Thermocouple Fitting Thermocouple Fitting Navistar 40 pplication C (127.00) Turbo Elbow C (127.00) Intermediate Elbow C (127.00) Turbo Elbow C (127.00) dapter C (127.00) Turbo Elbow C (127.00) Turbo Elbow Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-21
22 Special Tubes Exhaust ccessories Special International /Navistar Tubes Navistar pplication C2, C1, C1, C1, C2, C2, C (101.60) School us Tail Pipe C (101.60) S Series Vertical Stack C1, C (101.60) Over xle Pipe C1, C (101.60) School us xle Crossover Pipe C (101.60) School us Tail Pipe C (101.60) School us Tail Pipe C2, C2, C1, C1, C (101.60) Tail Pipe C1, C (101.60) School us Tail Pipe C1, C1, C1, C1, C1, C1, C1, C1, C (101.60) School us Tail Pipe Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
23 Exhaust ccessories Special Tubes Special International /Navistar Tubes Navistar pplication C (88.90) Exhaust Pipe C (88.90) Exhaust Pipe C (88.90) Manifold Elbow C (88.90) Intermediate Elbow C1, C (88.90) Exhaust Pipe C (88.90) Exhaust Pipe C (88.90) Exhaust Pipe C (88.90) Exhaust Pipe C (88.90) School us Tail Pipe C (88.90) Exhaust Pipe Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-23
24 Special Tubes Exhaust ccessories Special International /Navistar Tubes Navistar pplication C1, C (76.20) School us Tail Pipe C (76.20) Exhaust Pipe C91, C (63.50) Exhaust Pipe C91, C92, C91, C (63.50) School us Tail Pipe C (63.50) Exhaust Pipe Special Kenworth Tubes and Thermocouple Fitting & 90979C (25" (635 mm) long) 90980C (29" (737 mm) long) Kenworth pplication Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. luminized K (127.00) Turbo dapter K R 5.00 (127.00) RH Elbow K R 5.00 (127.00) RH Elbow C K L 5.00 (127.00) LH Elbow C K (127.00) Y Pipe cumminsfiltration.com
25 Exhaust ccessories Special Tubes Special Mack Tubes Thermocouple Fitting Kenworth pplication 4ME (101.60) R w/ R Fuel Tank ME (101.60) R & R Models ME (101.60) R Model Intermediate Special Peterbilt Tubes Thermocouple Fitting & C Peterbilt pplication luminized (127.00) C (127.00) Intermediate Elbow (127.00) See I.. - Elbow, pp (127.00) Turbo Elbow (127.00) Y Pipe Special Western Star Tubes Kenworth pplication (127.00) Exhaust Pipe Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-25
26 Stack Pipes Exhaust ccessories right, exceptional quality chrome or 16 gauge aluminized steel Straight Tubes Straight Stacks Curved Stacks Mitered West Coast Stacks I.. Slotted I.. Slotted I.. Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
27 Exhaust ccessories Stack Pipes luminized Straight Stack Pipes Curved Stack Pipes Mitered Stack Pipes I.. I.. I.. Plated Straight Tubes luminized Plated luminized Plated luminized Plated Plated 3.00 (76.20) (444.50) (76.20) (457.20) (76.20) (609.60) C C 3.00 (76.20) (914.40) C C C C 3.00 (76.20) ( ) C C C 3.00 (76.20) ( ) C C (79.88) (970.03) Q (88.90) (444.50) (88.90) (457.20) (88.90) (609.60) C (88.90) (914.40) C C (88.90) ( ) C (88.90) ( ) C C 4.00 (101.60) (444.50) C C Plated 4.00 (101.60) (457.20) C 89921C 4.00 (101.60) (609.60) C C 4.00 (101.60) (914.40) C C C C 4.00 (101.60) ( ) C C C C 90595C 4.00 (101.60) ( ) C C C 4.00 (101.60) ( ) C C C C 4.00 (101.60) ( ) 89986C 89294C 4.00 (101.60) ( ) 89987C 89295C 4.00 (101.60) ( ) C C 4.00 (101.60) ( ) (114.30) (444.50) (114.30) (698.50) (114.30) ( ) Q (127.00) (457.20) C C C 5.00 (127.00) (609.60) C C C 5.00 (127.00) (914.40) C C C C 89993C 5.00 (127.00) ( ) C C C C 89994C 5.00 (127.00) ( ) 90605C 89997C 5.00 (127.00) ( ) C C C C 90439C 90438C 5.00 (127.00) ( ) 89999C 5.00 (127.00) ( ) C 89918C 89988C C 90440C 90589C 5.00 (127.00) ( ) 90610C 89989C 89297C 90441C 5.00 (127.00) ( ) 90608C 89990C 89298C 90442C 90591C 5.00 (127.00) ( ) 90612C 90526C C 90597C 5.00 (127.00) ( ) 90613C 90614C 90604C 6.00 (152.40) (508.00) (152.40) (609.60) (152.40) (914.40) C C 6.00 (152.40) ( ) C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-27
28 Stack Pipes Exhaust ccessories Curved Stack Pipes and Tail Pipes ngle cut right, exceptional quality chrome or 16 gauge aluminized steel I.. Slotted Type luminized I.. - Plated luminized - Plated Curved Stack Pipe 2.00 (50.80) 9.00 (228.60) Tail Pipe 2.00 (50.80) 9.00 (228.60) N/ Curved Stack Pipe 2.25 (57.15) (254.00) Tail Pipe 2.50 (63.50) (279.40) Curved Stack Pipe 2.75 (69.85) (304.80) Tail Pipe 3.00 (76.20) (304.80) C Curved Stack Pipe 3.00 (76.20) (444.50) Curved Stack Pipe 3.00 (76.20) (609.60) C Curved Stack Pipe 3.00 (76.20) (914.40) C C Curved Stack Pipe 3.00 (76.20) ( ) C C Curved Stack Pipe 3.00 (76.20) ( ) C C Tail Pipe 3.50 (88.90) (304.80) C Curved Stack Pipe 3.50 (88.90) (444.50) Curved Stack Pipe 3.50 (88.90) (609.60) C Curved Stack Pipe 3.50 (88.90) (914.40) C Curved Stack Pipe 3.50 (88.90) ( ) C Curved Stack Pipe 3.50 (88.90) ( ) C C Tail Pipe 4.00 (101.60) (304.80) C Tail Pipe 4.00 (101.60) (444.50) C C Curved Stack Pipe 4.00 (101.60) (609.60) C C Curved Stack Pipe 4.00 (101.60) (914.40) C C Curved Stack Pipe 4.00 (101.60) ( ) C C Curved Stack Pipe 4.00 (101.60) ( ) C C Tail Pipe 4.50 (114.30) (444.50) N/ Tail Pipe 5.00 (127.00) (335.28) C N/ Tail Pipe 5.00 (127.00) (457.20) C C Curved Stack Pipe 5.00 (127.00) (609.60) C C Curved Stack Pipe 5.00 (127.00) (914.40) C C Curved Stack Pipe 5.00 (127.00) ( ) C C Curved Stack Pipe 5.00 (127.00) ( ) C C Tail Pipe 6.00 (152.40) (508.00) C Curved Stack Pipe 6.00 (152.40) (914.40) C C Curved Stack Pipe 6.00 (152.40) ( ) C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
29 Exhaust ccessories Stack Pipes 90 Curved Stack Pipes right, exceptional quality chrome or 16 gauge aluminized steel Leg luminized Part Part 3.00 (76.20) 30.5 (774.7) (520.70) Q (76.20) ( ) (609.60) (101.60) ( ) (609.60) (101.60) ( ) (609.60) C * One piece construction I.. Slotted ump Truck Stacks right, exceptional quality chrome or 16 gauge aluminized steel Style Top Straight luminized Part Part 4.00 (101.60) ( ) 31.1 (789.9) C 4.00 (101.60) (965.20) N/ (127.00) (965.20) N/ (127.00) ( ) 29.2 (741.7) C* * One piece construction Style (307.3) Offset 14.5 (368.3) 11.1 (281.9) Offset 13.4 (340.36) ll dimensions are in inches (millimeters) Style 2 Top Straight Custom Stacks Painted black - I.. Slotted 2.00 (50.80) (730.25) Q24617 Q (63.50) (787.40) Q (63.50) (952.50) Q (63.50) ( ) Q (76.20) (558.80) Q26688* 4.19 (106.43) (685.80) Q (106.43) (965.20) Q42093 * Straight stack I.. Slotted ent ent I.. Slotted Straight Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-29
30 Stack Pipes Exhaust ccessories 6" by 5" (152 mm by 127 mm) Monster Stacks Change the appearance of a factory system by replacing a standard 5" (127 mm) stack with a 6" (152 mm) stack. Obtain lower restriction and dress up your truck. right, exceptional quality chrome 6" (152 mm) tubing sized down to fit 5" (127 mm) system, no weld joints Style 1 Style 2 Style 3 Style 4 5" 5" I.. 5" 5" I.. Style (914.40) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C (914.40) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C ( ) C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
31 Exhaust ccessories Heat Guards vailable in both aluminized and bright stainless steels with various degrees of wrap and hole patterns 1/2 WRP PIPE GUR (round hole pattern shown) 1/2 WRP MUFFLER GUR (vertical slot pattern available horizontal slot pattern shown) 3/4 WRP MUFFLER GUR (vertical slot pattern shown) 3/4 WRP MUFFLER GUR (blank pattern shown) 360 MUFFLER GUR (vertical slot pattern shown) escription Guard Wrap Material.75 ia. Hole Pattern Horizontal Slot Pattern Vertical Slot Pattern ( ) Pipe 1/ ( ) Stainless 89744C 89744F 6.00 (152.4) Pipe 1/ ( ) Stainless 90856C 90976C ( ) Muffler 1/ ( ) luminized ( ) Muffler 1/ ( ) Stainless 89747C 89996C 89745C ( ) Muffler 3/ ( ) Stainless 89749C 89995C 89774C lank Pattern ( ) Muffler 3/ ( ) Stainless 90555C 90556C 90461C ( ) Muffler ( ) Stainless 90901C Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-31
32 rackets Exhaust ccessories Stack Support rackets Use with stacks for vertical support 5.00 (127.00) C 6.00 (152.40) 90598C Universal Mounting racket For 4" to 5" (102 to 127 mm) U-olt Clamps 89518K 6.2 to 8.8 (157.5 to 223.5) ll dimensions are in inches (millimeters) 360 Guard racket Kit Can be modified for off-center tubes Not visible above shield Includes two complete brackets and all hardware required to mount shield Fits 5" (127 mm) tube 90900K Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
33 Exhaust ccessories Hangers Universal Swivel Hangers Heavy reinforced rubber pad Swivel design permits 360 mounting One piece construction installs in seconds New closed end allows easy connection and assembly of loose system components 9.60 (243.80) 89519K (337.82) 90863K (439.42) 90843K Universal Pipe Hangers Clamp and hanger strap are made of heavy gauge steel to hold tail pipe and exhaust pipe Fits Pipe 3.00 (76.20) (101.60) (127.00) (305) ll dimensions are in inches (millimeters) Universal Muffler Hangers Heavy duty muffler body clamp and hanger strap The strap can be bent and twisted to fit the installation. Use for horizontal or vertical mount. Use two for maximum rigidity. 12 (305) ll dimensions are in inches (millimeters) ody 6.00 (152.40) 89534K 7.00 (177.80) 89535K 8.00 (203.20) 89536K 8.25 x ( x ) 89537K 8.50 (215.90) 89538K 9.00 (228.60) 89539K (254.00) 89540K x ( x ) 89551K Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-33
34 Miscellaneous ccessories Exhaust ccessories Clamp Kits Two chrome clamps per kit Stainless mounting hardware supplied with each kit 1/2 Wrap 3/4 Wrap 4.00 (101.60) 5.75 (146.05) 89770K 5.00 (127.00) 6.75 (171.45) 89771K 6.00 (152.40) 7.75 (196.85) 90857K 8.50 (215.90) (260.35) 89761K 9.00 (228.60) (273.05) 89762K 89766K (257.05) (300.99) 89763K 89767K 3 Standoffs for 1/2 wrap 4 Standoffs for 3/4 wrap Universal Grab Hanger plated 89775K 24 (610) ll dimensions are in inches (millimeters) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
35 Exhaust ccessories Miscellaneous ccessories Rain Caps Single bolt mounting Heavy duty welded assembly Silent Rain Caps Nylon stop for quiet operation Exhaust Stack Outside Zinc Plated Counter alance Type Rain Cap Silent Rain Cap Zinc Plated 1.50 (38.10) (273.05) (50.80) (57.15) (63.50) (69.85) (76.20) E 3.50 (88.90) E 4.00 (101.60) C 89440E 4.50 (114.30) (127.00) C 89450E 6.00 (152.40) C Exhaust Elbow/Pipe Shield Used on 3" (76 mm) through 5" (127 mm) exhaust tubes Protects hoses and wiring from high temperatures Installs in seconds anywhere on elbow or straight section using standard hose clamps (not supplied) 90587K 4.0 (101.6) ll dimensions are in inches (millimeters) Light eflectors right, exceptional quality chrome Part Side 90289C LH 90290C RH 6 (152) 6 (152) 3 (76) ll dimensions are in inches (millimeters) Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time. cumminsfiltration.com 2-35
36 Miscellaneous ccessories Exhaust ccessories Mounting ands Mild steel or black paint finish F E C E C Type 1 Type 2 C E F Type Material* Part 4.77 (121.16) 1.57 (39.88) 2.76 (70.10) 3.07 (77.98) (8.890) 2 Mild Steel Q (133.35) 0.88 (22.35) 3.25 (82.55) 3.12 (79.25) (8.738) 0.50 (12.70) 1 Mild Steel Q (145.29) 1.98 (50.29) 3.15 (80.01) 3.54 (89.92) (8.890) 2 Mild Steel** Q (145.29) 1.98 (50.29) 3.15 (80.01) 3.54 (89.92) (9.931) 2 Mild Steel** Q (165.10) 0.88 (22.35) 3.75 (95.25) 3.75 (95.25) (8.738) 0.50 (12.70) 1 Mild Steel Q (171.70) 1.98 (50.29) 3.54 (89.92) 3.95 (100.33) (8.890) 2 Mild Steel** Q (182.12) 0.88 (22.35) 3.50 (88.90) 4.09 (103.89) (8.738) 0.50 (12.70) 1 Mild Steel Q (182.12) 1.98 (50.29) 3.94 (100.08) 4.15 (105.41) (8.890) 2 Mild Steel** Q (182.12) 0.88 (22.35) 3.50 (88.90) 4.09 (103.89) (8.738) 0.50 (12.70) 1 Mild Steel** Q (185.42) 0.88 (22.35) 4.25 (107.95) 4.15 (105.41) (8.738) 0.50 (12.70) 1 Mild Steel Q (200.41) 0.88 (22.35) 4.25 (107.95) 4.44 (112.78) (8.738) 0.50 (12.70) 1 Mild Steel Q (200.41) 0.88 (22.35) 4.25 (107.95) 4.45 (113.03) (8.738) 0.50 (12.70) 1 Mild Steel** Q (203.20) 1.25 (31.75) 4.25 (107.95) 4.88 (123.95) (10.312) 0.88 (22.35) 1 Mild Steel Q (211.33) 1.98 (50.29) 4.34 (110.24) 7.72 (196.09) (8.890) 2 Mild Steel** Q (215.90) 0.88 (22.35) 4.25 (107.95) 4.75 (120.65) (8.738) 0.50 (12.70) 1 Mild Steel Q (228.60) 1.25 (31.75) 4.50 (114.30) 5.38 (136.65) (10.312) 0.88 (22.35) 1 Mild Steel Q (258.57) 1.25 (31.75) 5.00 (127.00) 5.97 (151.64) (10.287) 0.88 (22.35) 1 Mild Steel Q (259.08) 1.25 (31.75) 5.00 (127.00) 5.98 (151.89) (10.312) 0.88 (22.35) 1 Mild Steel Q (261.62) 1.25 (31.75) 5.00 (127.00) 6.03 (153.16) (10.312) 0.88 (22.35) 1 Mild Steel Q (261.62) 1.25 (31.75) 5.00 (127.00) 6.03 (153.16) (10.312) 0.88 (22.35) 1 Mild Steel** Q (279.40) 1.25 (31.75) 5.00 (127.00) 6.38 (162.05) (10.312) 0.88 (22.35) 1 Mild Steel Q (299.72) 1.25 (31.75) 6.00 (152.40) 6.78 (172.21) (10.312) 0.88 (22.35) 1 Mild Steel Q (307.34) 1.50 (38.10) 8.00 (203.20) 7.12 (180.85) (11.913) 1.06 (26.92) 1 Mild Steel Q (330.20) 1.50 (38.10) 6.00 (152.40) 7.56 (192.02) (11.913) 1.06 (26.92) 1 Stainless Q (355.60) 1.50 (38.10) 8.00 (203.20) 8.06 (204.72) (11.913) 1.06 (26.92) 1 Mild Steel Q (406.40) 1.25 (31.75) (254.00) 8.88 (225.55) (10.312) 0.88 (22.35) 1 Mild Steel Q (459.74) 1.50 (38.10) 8.00 (203.20) (257.05) (11.913) 1.06 (26.92) 1 Mild Steel Q27167 * Mild steel bands are finished with gray primer unless otherwise noted ** Finished with black paint Specifications subject to change without notice. See page 1-7 for cleaning chrome. ll parts listed are subject to lead time cumminsfiltration.com
Exhaust Accessories. Section Index. Free Exhaust Accessory Poster
Exhaust Accessories Free Exhaust Accessory Poster For mechanics and parts counter personnel, this door width sized poster (25"x38" /635 mm x 965 mm) is available from Donaldson or your local Donaldson
More informationI N G F E AT U R. Torca Products, Inc. PRODUCTS
F E AT U R I N G Torca Products, Inc. PREMIUM EXHAUST CLAMPING PRODUCTS EXHAUST CLAMPING PRODUCTS BEST TorcTite PRE-FORMED EXHAUST CLAMPS W/ GASKET ATTACHED TO REACTION BLOCK Superior performance Best
More informationFirst Choice of Leading Manufacturers. Fleetguard is recognised worldwide as the leader in the fields of heavy duty filtration,
Exhaust First Choice of Leading Manufacturers Fleetguard is recognised worldwide as the leader in the fields of heavy duty filtration, coolant and exhaust. Our innovative and diverse range of products
More informationCLAMPS BAND CLAMPS.
CLAMPS & BRACKETS CLAMPS BAND CLAMPS THE WFC SERIES: A GRAND ROCK EXCLUSIVE CLAMP LAP-JOINTS (Step Clamp).030" Gauge Material Heaviest in the Industry 304 Bright Stainless Steel or Aluminized Steel Unique
More informationExhaust Product Guide for Medium & Heavy Vehicles & Equipment
Exhaust Product Guide for Medium & Heavy Vehicles & Equipment Mufflers Clamps Tubing / Connectors Stacks/Tailpipes Elbows Hangers/Brackets Shields This publication contains a wide selection of standard
More information(Standard) (Heavy Duty) (Heavy Duty w/ (Guillotine) (Flat Strap U-Bolt) Welded Saddle)
ESSORIES LMPS (50) (50) (50) (50) Size Indiv. ulk (50) (50) Indiv. Indiv. Indiv. Indiv. Indiv. Pkg. Pkg. Indiv. Pkg. ulk Pkg. Part Part Part Part Part 1¹/₈ 35322 1¹/₄ 35323 1³/₈ 35324 1¹/₂ 35325 34112
More informationClamps listed by: Type (Heavy, Standard, Specialty), Finish (Regular, Zinc Plated, Stainless Steel), Style Clamps
Clamps listed by: Type (Heavy, Standard, Specialty), Finish (Regular, Zinc Plated, Stainless Steel), Style Clamps Page 1-A Muffler Clamps - Heavy Duty HEAVY DUTY GM STYLE SADDLE, 3/8" U-BOLT WITH FLANGE
More informationEngine and exhaust solutions.
Commercial Vehicle Diagnostic Kit Engine and exhaust solutions. Coolant Level Sensor For Mack #853717 Cummins B-Series Engine Heater #3500030 Ford Navistar G2.8 Reman Injector #AP60900 www.sadlerpowertrain.com
More informationBREEZE Hi-Torque Liner Clamps
BREEZE Hi-Torque Liner Clamps This is the original and still the strongest worm-drive clamp available. Use it where conventional clamps are inadequate or in applications where double and triple clamping
More informationENGINE PRODUCTS QUICK REFERENCE
QUICK REFERENCE GUE QUICK REFERENCE CONTENTS Belts & Fan Clutches Page 1 Filters Page 2 Water Pumps Page 3 Caps, Dipsticks & Thermostats Page 3 Hose Products Page 4 Exhaust Pages 5-6 TRUCK BELTS FAN CLUTCHES
More informationACCESSORIES 225SCPF 300SCPFWG 87390L 87490L 87590L 87790L STAINLESS STEEL U-BOLT U300SS U350SS U400SS U500SS
AUTO-JET SEAL CLAMPS - STAINLESS STEEL EASY SEAL CLAMPS ( 2 SIZES AVAILABLE) 31/2 350SCEZ 4 4OOSCEZ PRE-FORMED WITH GASKET 200SCPF 225SCPF 300SCPFWG 350SCPFWG 400SCPFWG 500SCPFWG U-BOLT CLAMPS ACCU-SEAL
More information1 Ea./Box. Filter size 14 x 20 (350 x 500) 14 x 25 (350 x 625) 14 x 30 (350 x 750) 24 x 30 (610 x 750) 20 x 30 (500 x 750) 1 Ea./Box 11.
Bulletin 20-15 / ecember 2007 The Unico System ccessory Specifications Return Grille & Filter ir Filter throwaway filter, two duct bands, and clips. Rough-in dimensions are shown. B 1.0 (25) Pleated 1.0
More informationAny reference to OEM names or OEM product identification numbers/descriptions/pictures/model numbers is for identification only and does not indicate
135 EXHAUST COMPONENTS Chrome stack, curved style Dia Length Intel Material F247701 4 18 4 I.D. Chrome F247702 4 36 4 I.D. Chrome F247703 4 78 4 I.D. Chrome F247704 5 18 5 I.D. Chrome F247705 5 36 5 I.D.
More informationRAND ROCK EXHAUST SYSTEMS
395 Fountain Avenue Painesville, OH 44077 Phone: 440-639-2000 Toll-Free Phone: 800-321-3674 Fax: 440-639-2010 Ecommerce: shop.grpipes.com E-mail: sales@grandrock.com 100515 GSOLUTIONS RANDROCKEXHAUSTSYSTEMSEXHAUST
More informationExhaust System Installation for the Ford F-150 PNs , , , , , ,
Exhaust System Installation for the Ford F-150 PNs 140693, 140694, 140695, 140696 140697, 140698, 140699, 140700 BORLA PERFORMANCE INDUSTRIES ***** Please compare the parts in the box with the bill of
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationOwner smanual. Banks Monster Exhaust System Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks & Excursions
with Installation Instructions Owner smanual Banks Monster Exhaust System 2003-2007 Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks & Excursions THIS MANUAL IS FOR USE WITH SYSTEMS 48749, 48760, 48781,
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationBanks DynaFact. PYROMETER GAuGE
owners manual with installation instructions Banks DynaFact PYROMETER GAuGE THIS MANUAL IS FOR USE WITH SYSTEM 64001,64002 AND 64007 Gale Banks Engineering 546 Duggan Avenue Azusa, ca 91702 (626) 969-9600
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V. Extended Capacity Replacement Tank for Diesel Chevrolet / GMC Trucks
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended Capacity Replacement Tank
More informationFlex Tube Elbow w/ Marmon or Flare
Aftertreatment Device V-Band Clamp Flex Tube Elbow w/ Marmon or Flare In-Line Aspirator 2 1. Marmon Adaptor 2. Weld and Clamp Connectors 3. Expanders 4. High Performance Flex 5. Elbows 6. SS Straight Tubing
More informationSave over 55% All-Makes Headlights BULLSEYE. Dorman Volvo Headlights. May 2017 EACH. Dealer price. our price
BULLSEYE May 2017 Save over 55% All-Makes Headlights Dorman Volvo Headlights Left PN: 888-5506 Right PN: 888-5505 Dealer price 437 our price FIND A BRANCH Near you: fleetpride.com. 800-967-6206 Why Pay
More informationAccessory Catalog 2017 Revision: M-ACCS July 2017
www.maximsilencers.com Industrial Silencer, Heat Recovery and Catalytic Specialists Maxim Silencers Accessory Catalog 2017 July 2017 Prices are subject to change without notice. Prices are in U.S. dollars
More informationOwner smanual. Banks Monster Split-Dual Exhaust System Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks. with Installation Instructions
Owner smanual with Installation Instructions Banks Monster Split-Dual Exhaust System 2003-2007 Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks THIS MANUAL IS FOR USE WITH Systems 47600-47614, 48761,
More informationOwner smanual. Banks Monster Exhaust System Dodge 5.9L Cummins ISB Pickup Trucks. with Installation Instructions
Owner smanual with Installation Instructions Banks Monster Exhaust System 2003-2004 Dodge 5.9L Cummins ISB Pickup Trucks THIS MANUAL IS FOR USE WITH MONSTER EXHAUST, SYSTEMS 48640, 48641, 48642 & 48643
More informationEM... The Quiet Alternative
EM PROUTS PHILLIPS & TEMRO INUSTRIES EM PROUTS 538 ottonwood Lane Prior Lake, Minnesota 55372 (952) 44-9 fax: (952) 44-34 phillipsandtemro.com EM... The Quiet lternative Industrial & Marine Silencers Exhaust
More informationPETERBILT HEAVY DUTY TRUCKS
PETERBILT HEAVY DUTY TRUCKS Peterbilt 379 Dual Exhaust VB-588C PB-13430 PB-13056C (5") PB6-13056C (6") PB7-13056C (7") VB-588C PB-13002 SF-518 SF-518 SF-518 OR PB-15073 PB-12294-11 OR PB-15353Y OR PB-13055Y
More informationINSTALLATION TROUBLESHOOTING SUPPLEMENT
TITAN Fuel Tanks INSTALLATION TROUBLESHOOTING SUPPLEMENT For Midship Replacement Fuel Tanks AND Utility Tanks This supplement is intended to provide additional information for installers to aid in simple
More informationPipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationCanada Insurance Collision Repair Catalog
Canada Insurance Collision Repair Catalog Jan June 2016 Quality Aftermarket Parts Find a distributor near you at: www.peterbilt.com Nationwide 1 Year Warranty Distributed by PACCAR Parts Quality Aftermarket
More informationPipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationFord 8, 9 Small Bearing Installation Instructions Rear Disc Conversion
Ford 8, 9 Small Bearing Installation Instructions Rear Disc Conversion This kit is for Ford 9 rear axles with the small (2.835 ) style bearing and Ford 8 rear ends. This kit is designed to work with axles
More informationBanks Monster Exhaust Rear Quads System
Banks Monster Exhaust Rear Quads System 2007-2008 Chevy/GMC 1500 Silverado, 6.0L V-8 Gas, Vortex Max THIS MANUAL IS FOR USE WITH MONSTER EXHAUST SYSTEMS 48347 Gale Banks Engineering 546 Duggan Avenue Azusa,
More informationU.S. Insurance Collision Repair Catalog
U.S. Insurance Collision Repair Catalog Jan June 2016 Quality Aftermarket Parts Find a distributor near you at: www.peterbilt.com Nationwide 1 Year Warranty Distributed by PACCAR Parts Quality Aftermarket
More informationCONTENTS SPECS MUFFLER SPECIFICATIONS GENERAL INFORMATION SCHOOL BUS APPLICATIONS INTERCHANGES NUMERICAL LISTINGS TOOLS & TOOLS AND DISPLAYS
CONTENTS GENERAL GENERAL INFORMATION 2 APPLICATIONS SCHOOL BUS APPLICATIONS 8 ACCESSORIES ACCESSORIES 78 SPECS MUFFLER SPECIFICATIONS 104 INTERCHANGES 106 NUMERICAL LISTINGS TOOLS & TOOLS AND DISPLAYS
More informationOwner smanual. Banks Monster Exhaust System Dodge 5.9L Cummins ISB Pickup Trucks. with Installation Instructions
Owner smanual with Installation Instructions Banks Monster Exhaust System 2003-2004 Dodge 5.9L Cummins ISB Pickup Trucks THIS MANUAL IS FOR USE WITH MONSTER ExHAUST, SySTEMS 48640, 48641, 48642 & 48643
More informationAkroBins. Storage Bins
X Storage ins kroins Control inventories, shorten assembly times, and minimize parts handling. eavy-duty bins securely stack atop each other, sit on shelving, and hang from kro-mils racks, panels, rails,
More informationCOLLISION PARTS AFTERMARKET. International, or Mack. let us get you a quote and try our best to earn your
Volume 4 BEST ON YOUR TRUCK - BETTER ON YOUR BUDGET Introducing BEST FIT Aftermarket Collision Parts for Heavy Duty Trucks. BEST FIT offers much more than just bumpers and grilles! Take a look at the next
More information10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More informationOwner smanual. Banks Split Dual Monster Exhaust System Dodge 5.9L Cummins ISB Pickup Trucks. with Installation Instructions
Owner smanual with Installation Instructions Banks Split Dual Monster Exhaust System 2003-2004 Dodge 5.9L Cummins ISB Pickup Trucks THIS MANUAL IS FOR USE WITH MONSTER EXHAUST, SYSTEMS 48702-48705 Gale
More informationComponents & Accessories
Flanges, Tuning Accessories & Baffles HOOKER FLANGES AND REPLACEMENT GASKETS 27250HKR Flange kit - Chrome flanges and C Clips for all EVO and Twin Cam Harleys skin packaged on a Hooker display card 27249HKR
More informationDurulite Door Hardware Manual
R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION
More informationBanks Monster Exhaust System Ford Power Stroke 6.0L Turbo-Diesel F450/F550 Trucks, Cab & Chassis
Owner smanual with Installation Instructions Banks Monster Exhaust System 2003-2007 Ford Power Stroke 6.0L Turbo-Diesel F450/F550 Trucks, Cab & Chassis THIS MANUAL IS FOR USE WITH SYSTEMS 47273-47292 Gale
More informationMopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion
Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationOwner smanual. Banks Monster Sport Exhaust System (LB7, LLY, & LBZ) Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups
with Installation Instructions Owner smanual Banks Monster Sport Exhaust System 2001-2007 (LB7, LLY, & LBZ) Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH SYSTEM 48769-48776 General
More informationEXHAUST. Accessory Catalog and Specifications. Silex INNOVATIONS NGP032
EXHUST ccessory atalog and Specifications Silex INNOVTIONS NGP032 PSSIONTE OLLORTIVE INNOVTIVE TRUSTED EMPOWERED ENERGIZED World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI 53589
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationInstallation Manual. For ISC, ISL, ISC03 And ISL03 Engines
Installation Manual For ISC, ISL, ISC03 And ISL03 Engines Table of Contents 1. Installation of the E Brake Assembly... 3 2. Pneumatic Group Installation... 5 3. Installation of the Controls... 7 4. Final
More informationSheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota
Sheet Metal Connectors, Inc. 5850 Main Street N.E. Minneapolis, Minnesota 55432-5439 Sheet Metal Connectors, Inc. www.smcduct.com SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS MINNEAPOLIS, MN 5850 Main Street
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationCanada Insurance Collision Repair Catalog
Canada Insurance Collision Repair Catalog Jan June 2016 Find a distributor near you at: www.kenworth.com Nationwide 1 Year Warranty Distributed by PACCAR Parts and Components Welcome to the Kenworth Insurance
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationExhaust System Installation for Chevrolet Silverado and GMC Sierra PN , , , , ,
Exhaust System Installation for Chevrolet Silverado and GMC Sierra PN-140535, 140536, 140537, 140538, 140539, 140540 ***** Please compare the parts in the box with the bill of materials provided *****
More informationU.S. Insurance Collision Repair Catalog
U.S. Insurance Collision Repair Catalog Jan June 2018 Find a distributor near you at: www.kenworth.com Nationwide 1 Year Warranty Distributed by PACCAR Parts and Components Welcome to the Kenworth Insurance
More informationBanks Monster Exhaust System
owners manual with installation instructions Banks Monster Exhaust System 1998-2002 Dodge 5.9L Cummins (24-valve) ISB Pickup Trucks T H I S M A N U A L I S F O R U S E W I T H Monster exhaust, systems
More informationACCESSORY CATALOG Accessory Specifications
Industrial Silencer, Heat Recovery and Catalytic Specialists A Total Solutions Provider for Industrial Noise Control Since 1895 Revision: M-ACCS-001 April 2016 ACCESSORY CATALOG Accessory Specifications
More informationNEW YORK AIR BRAKE. Air Hose Products. Catalog & Application Guide/ Freight Car & Locomotive
NEW YORK AIR BRAKE Air Hose Products Catalog & Application Guide/ Freight Car & Locomotive P R O D U C T I V I T Y T H R O U G H T E C H N O L O G Y Air Hose Assemblies & Fittings New York Air Brake is
More informationwith installation boost GAUGE this manual is for use with systems
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 gale banks engineering 546 duggan avenue azusa, ca 91702 (626) 969-9600 www.bankspower.com
More informationInstallation Instructions for Challenger R/T: , , , Charger R/T: , , ,
Installation Instructions for Challenger R/T: 140713, 140714, 140715, 140716 Charger R/T: 140722, 140723, 140724, 140725 ***** Please compare the parts in the box with the bill of materials provided *****
More informationDUAL HEAD MIRROR SYSTEMS
170 REPLACEMENT DUAL HEAD MIRROR SYSTEMS Custom Wide Angle Mirror Systems for Walk-in Vans Custom mirror systems all include 6.5 x 10 upper flat glass and 6.5 x 6 lower convex glass mirror heads. Replacement
More informationCONTENTS HD EXHAUST GENERAL INFORMATION ACCESSORIES, MUFFLERS & PIPES MEDIUM & H.D. APPLICATIONS SCHOOL BUS APPLICATIONS TRACTOR MUFFLERS
GENERAL INFORMATION CONTENTS GENERAL INFORMATION GENERAL INFORMATION 2 ACCESSORIES, MUFFLERS & PIPES 16 MEDIUM & H.D. APPLICATIONS 74 SCHOOL BUS APPLICATIONS 128 TRACTOR MUFFLERS 188 CROSS REFERENCE 210
More informationBanks Monster Exhaust System Ford Power Stroke 6.7L Turbo-Diesel F-250/F-350/F-450 Trucks Crew Cab 6.75ft & 8ft bed
with Installation Instructions Owner smanual Banks Monster Exhaust System 2011-2015 Ford Power Stroke 6.7L Turbo-Diesel F-250/F-350/F-450 Trucks Crew Cab 6.75ft & 8ft bed THIS MANUAL IS FOR USE WITH SYSTEM
More informationC I R R U S COLLECTOR DESCRIPTION
COLLECTOR 1. DESCRIPTION This section describes the portion of the exhaust system which collects the exhaust gases from the cylinder and conducts them overboard. Included are the exhaust headers and collector
More information18SP622 Series 50 Gillig Low Floor Diesel Particulate Filter Installation
18SP622 Series 50 Gillig Low Floor Diesel Particulate Filter Installation DESCRIPTION A replacement diesel particulate filter assembly has been released for use in Gillig Low Floor buses with Series 50
More informationREPLACEMENT OF TRANSMISSION EXTENSION-CASE GASKET AND OUTPUT-SHAFT SEAL ON 95 XJ6
D. Jensen 2006 Distribution: www.jag-lovers.com REPLACEMENT OF TRANSMISSION EXTENSION-CASE GASKET AND OUTPUT-SHAFT SEAL ON 95 XJ6 V. 1.0 June 2006 The Fine Print: The following is a summary of my experience
More information03-04 Mach 1. Hellion Power Systems Mach 1 Kit Instructions
Hellion Power Systems 03-04 Mach 1 Kit Instructions Part 1 Hellion recommends that the front suspension system be installed either by trained professionals or by 5.Remove rack bolts K-Member Installation
More informationINSTALL MANUAL D o d g e 1 2 v 6 B T A PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION.
PN#1045310 12V Dodge Twin Turbo Kit (I-00273) 1 INSTALL MANUAL BD Twin Turbo Kit 1994-1 9 9 8 D o d g e 1 2 v 6 B T A Part# 1045310 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. * Picture as shown
More information(4) 10mm x 35mm Bolt/8mm Nut Plates. (2) 12mm Double Nut Plates. (2) Center Mounting Brackets (use for driver or passenger side)
PARTS LIST: PREMIUM RUNNING BOARD Qty Description Qty Description 1 Driver/Left Running Board 8 10mm Lock Washers 1 Passenger/Right Running Board 4 10-1.5mm Hex Nuts 2 Driver/Left Mounting Brackets (front
More informationInstallation for Chevrolet Silverado & GMC Sierra PN s , , ,
Installation for Chevrolet Silverado & GMC Sierra PN s-140717, 140718, 140719, 140720 BORLA PERFORMANCE INDUSTRIES ***** Please compare the parts in the box with the bill of materials provided ***** to
More informationCable & Wire Management
Type 1 Screw over... 8-14 Type 1 Quick-onnect inge over... 15-20 Type 3R nviroshield... 21-24 Type 12... 25-31 eed-through Wireway Type 12... 32-35 eed-through Wireway Type 4X... 36-39 Wiring Trough Type
More information7 x 16 Stainless. Steel with. 5/16 studs. 1162H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug. AV-13017
WEST COAST MIRRORS 161 W-180 7 x 16 Steel Head (White) with 5/16 studs 60-310 7 x 16 Flange Mount Mirror,. Fits International S Series ML-10-132 7 x 16 (White) with 5/16 studs 1159 7 x 16 Stainless Steel
More informationInstallation Manual v1.0: Aurora Plus Turbo Kit ( ) 5.9L Dodge. Please read all instructions before installation.
Installation Manual v1.0: Aurora Plus - 4000 Turbo Kit (2003-2007) 5.9L Dodge Please read all instructions before installation. Figure 1: Aurora Plus - 4000 Kit Contents 1 Figure 2: Aurora Plus Hardware
More informationInstallation Instructions
BD DODGE CUMMINS PERFORMANCE E X H A U S T M A N I F O L D Installation Instructions Application List 2007-2015 6.7L / HE351 OE Turbo 1045965 2007-2015 6.7L / T4 S400 Turbo s 1045965-T4 PLEASE READ ALL
More informationR270 (510 SERIES): TITEFLEX R270 (510 SERIES) ENGLISH
TITEFLEX R270 (510 SERIES) SERI ES: 510 SPECIFICATION: None BRAID: Nomex INNERCORE: PTFE Convoluted QUALIFICATIONS : Qualified specific requirements. R270 (510 SERIES): 510 Series: low-pressure PTFE hose
More informationRT1 DUAL OUTLET SLIP-ON EXHAUST HONDA CBR600RR Rev B
18-1022-723-02 08 50 44541 Rev B PARTS INCLUDED Ref. Part Number Description Qty 1) 00-200-00042 Slip-on S-bend Assembly 1 2) 00-200-01197 Stainless Steel Dual Outlet Muffler 1 3) 03-46-42766 Muffler Mounting
More informationCONTENTS ONE YEAR LIMITED WARRANTY
CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR
More informationDodge 24v ISB
1 BD KILLER B SINGLE TURBO KIT 1994-2002 Dodge 24v ISB Part #: 1045163 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION UNLESS AN EO# IS LISTED, THIS PRODUCT IS LEGAL IN CALIFORNIA FOR RACING VEHICLES
More information3 October 2016 PN# V Dodge Twin Turbo Kit (I-00274) ½ D o d g e 2 4 v I S B
3 October 2016 PN#1045320 24V Dodge Twin Turbo Kit (I-00274) 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD Twin Turbo Kit 1998½- 2 0 0 2 D o d g e 2 4 v I S B Part# 1045320 PLEASE READ
More informationGM G-Body Manifold Back System Instruc ons
GM G-Body Manifold Back System Instruc ons Page 1 of 5 Buick 400, 430, 455 xxxxxxxxxxxxxxxxxxxx Pontiac Ram Air / HO x xxxxxxxxxxxxxxxxxxxx Olds 442 w/w & Z x xxxxxxxxxxxxxxxxxxxxxx Chevy Big & Small Block
More informationInstallation Manual For ISB5.9/ISB02 Engines
Installation Manual For ISB5.9/ISB02 Engines Table of Contents 1. Installation of the E Brake Assembly...3 2. Pneumatic Group Installation...5 3. Installation of the Controls...7 4. Final Test...11 Application
More informationargco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
More informationOwner smanual. Banks Monster Exhaust System Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks & Excursions
Owner smanual with Installation Instructions Banks Monster Exhaust System 2003-2007 Ford Power Stroke 6.0L Turbo-Diesel F250/F350 Trucks & Excursions THIS MANUAL IS FOR USE WITH SYSTEMS 48749, 48760, 48781,
More information99-04 GT. Hellion Power Systems Mustang GT Kit Instructions
Hellion Power Systems 99-04 Mustang GT Kit Instructions Part 1 Hellion recommends that the front suspension system be installed either by trained professionals or by 5.Remove rack bolts K-Member Installation
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationM-5230-MGTCA Mustang GT, Mustang GT500 INSTALLATION INSTRUCTIONS
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationGeneral Installation Practices
Owner smanual with Installation Instructions Banks Monster Exhaust System Dual-Tip 2007-2010 Dodge 6.7L Cummins ISB Pickup Trucks Including Mega Cab THIS MANUAL IS FOR USE WITH MONSTER ExHAUST, SySTEMS
More informationDISTURBING THE PEA DIS CE, SINCE 1968 TURBING THE PEA PERFORMANCE EXHAUST
DISTURBING THE PEACE, SINCE 1968 PERFORMANCE EXHAUST TABLE OF CONTENTS Glasspacks... 2-4 Header Mufflers....4 M-80 Mufflers...5 Salute Mufflers.... 6-9 Vortex Mufflers... 10-11 Extreme Mufflers... 12
More information(LB7, LLY & LBZ)
Owner smanual with Installation Instructions Banks Monster Exhaust System 2001-2007 (LB7, LLY & LBZ) Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH SYSTEM 48628-48634, 48937-48941
More informationChevrolet Camaro Exhaust System Installation PN s , , , , , , , , , , ,
Chevrolet Camaro Exhaust System Installation PN s -140280, 140281, 140282, 140348, 140356, 140493, 140494, 140495, 140526, 140530, 140528, 140532 Thank you for purchasing a Borla Performance Cat-Back Exhaust
More informationType 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationCUMMINS 6.7L EXHAUST BRAKE PRXB EXHAUST BRAKE KIT FOR 2007½-2015 TRUCKS EQUIPPED WITH 6.7L CUMMINS ISB DIESEL ENGINES. C Kit C Kit
CUMMINS 6.7L EXHAUST BRAKE PRXB EXHAUST BRAKE KIT FOR 2007½-2015 TRUCKS EQUIPPED WITH 6.7L CUMMINS ISB DIESEL ENGINES C44038 4 Kit C44039 5 Kit BEFORE STARTING THE INSTALLATION please read the entire installation
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationTo Order Call (562)
451 Park Industrial Dr. La Habra CA 90631 Phone: (562) 691-7006 Fax: (562) 691-5708 www.kugelkomponents.com 2017 PRICE SHEET #17 INDEPENDENT FRONT SUSPENSION SYSTEMS For All IFS Powder Coated (Black Only):
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 MODULAR WHEEL TO WHEEL NERF STEP BARS APPLICATION: 2007-2019 Chevy Silverado / GMC Sierra 2500-3500 Crew Cab (8ft. Bed) Excl. Dually PART NUMBER: 28-534580, 28-534585 ITEM
More information77R SERIES. Condensers. Passive & Powered
77R SERIES Condensers Passive & Powered Did You Know The presence of dust, bugs and debris on the face of the condenser fin and tubes will create a thermo-barrier. In turn, the condenser s ability to dissipate
More informationBRAKES. Brake Hoses. Brake Master Cylinder and Components. Blazer Jimmy Blazer Jimmy
Brake Hoses How to ID Brakes See Below BRAKES Rear Brake Hose 7 Front Brake Hoses - FRONT BRAKE HOSE-LH WD 7-78.9 9.9-7 FRONT BRAKE HOSE-RH WD 7-78.9 9.9-8 FRONT BRAKE HOSE-LH WD 79-80.9.9-9 FRONT BRAKE
More information