7 x 16 Stainless. Steel with. 5/16 studs. 1162H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug. AV-13017

Size: px

Start display at page:

Download "7 x 16 Stainless. Steel with. 5/16 studs. 1162H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug. AV-13017"

Sabrina Owen
5 years ago
Views:

WEST COAST MIRRORS 161 W-180 7 x 16 Steel Head (White)

Fits International S Series ML-10-132 7 x 16 (White) with

600807-7 x 16 Stainless Steel Mirror Head 600682-7 x 16

that fits GMC Kodiak w/5/16 stud HEATED WEST COAST MIRROR

S-158-K1 Glass Only S-158-KDV 6 x 16 Double Vision with

With Yellow Chevrons 180 6 x 12 Mirror Head with Yellow

x16 Heated Polished Stainless Steel, 60-345 - Same as

International ENLARGED VIEW OF BULLET PLUG White painted

6 x16 Mirror head with Yellow Chevrons. Factory assembled.

Range Quan. AV-16235 1/4-20 w/raintite sealer.015-.

375 25 AV-13231 1/4-20 with 7/8 screw 25 159SA - Mirror

1 WEST COAST MIRRORS 161 W x 16 Steel Head (White) with 5/16 studs x 16 Flange Mount Mirror,. Fits International S Series ML x 16 (White) with 5/16 studs x 16 Stainless Steel with 5/16 studs x 16 Stainless Steel Mirror Head x 16 White x 16 Black x 16 Stainless Steel, that fits GMC Kodiak w/5/16 stud HEATED WEST COAST MIRROR HEADS S-158-K 6 x 16 Flange Mount with Yellow Chevrons S-158-K1 Glass Only S-158-KDV 6 x 16 Double Vision with Convex Spot Mirror on Bottom. With Yellow Chevrons x 12 Mirror Head with Yellow Chevrons 1162H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug IHO - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/flat plug, fits Navistar. M x16 Heated Polished Stainless Steel, w/wire harness, w/o plug H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug Same as 1157H but with harness & plug, fits Navistar Driver Side Pass. Side 7 x 16 Heated with Bullet Plug that fits Navistar & International ENLARGED VIEW OF BULLET PLUG White painted steel loop assembly with 31-1/4 mounting centers. 6 x16 Mirror head with Yellow Chevrons. Factory assembled. AV AV JACK NUTS AV Part No Size Grip Range Quan. AV /4-20 w/raintite sealer AV / AV /4-20 with 7/8 screw SA - Mirror Assembly Pair of Left & Right AV P For use when installing a limited quantity of Jack Nuts. Insert the wrench between the screw and the head of the fastener, hold wrench and run in screw to set Jack Nut. (one per pkg)

162 DUAL HEAD MIRRORS Custom Wide Angle Mirror Systems for Walk-in Vans Custom mirror systems all include 6.5 x 10 upper flat glass and 6.5 x 6 lower convex glass mirror heads.

Loop Length When ordering loops only, cab feet are not included unless noted.

Stainless Steel Assembly T-780680-9 - Stainless Steel Loop Only (less cabfeet) (each) W-780680-9 - White Loop Only (less cabfeet (each) 30 LOOPS WITHOUT PRESETS with 9 B Dimension 724007 - Stainless

Assembly (each) 712631 - LH Stainless Steel Mirror Assembly. (each) 712632 - RH Stainless Steel Mirror Assembly.

2 162 DUAL HEAD MIRRORS Custom Wide Angle Mirror Systems for Walk-in Vans Custom mirror systems all include 6.5 x 10 upper flat glass and 6.5 x 6 lower convex glass mirror heads. Replacement mirror heads and glass are listed on the following page. All assemblies come with cabfeet. Mirror Assembly Loop Only All Mirror Assemblies come with Cab Feet. B -dim. Loop Length When ordering loops only, cab feet are not included unless noted. 11-1/4 LOOP WITH PRESETS with 7 B Dimension W White Loop for Mirror (less cab feet) (each) 30 LOOPS WITH PRESETS with 9 B Dimension LH Stainless Steel Assembly RH Stainless Steel Assembly T Stainless Steel Loop Only (less cabfeet) (each) W White Loop Only (less cabfeet (each) 30 LOOPS WITHOUT PRESETS with 9 B Dimension Stainless Steel Mirror Assembly (pair) Stainless Steel Loop with Cabfeet (each) 30 LOOPS WITHOUT PRESETS with 6-1/2 B Dimension LH White Mirror Assembly (each) RH White Mirror Assembly (each) LH Stainless Steel Mirror Assembly. (each) RH Stainless Steel Mirror Assembly. (each) T Stainless Steel Loop Only (less cabfeet) 33 MIRROR ASSEMBLIES WITHOUT PRESETS with 6-1/2 B Dimension White Mirror Assembly (pair) Stainless Steel Assembly (pair) 35-1/2 MIRROR ASSEMBLIES WITH PRESETS with 10 B Dimension LH Stainless Steel Assembly RH Stainless Steel Assembly S.S. Loops only with Cabfeet (pair) Cabfeet with Hardware without Presets White (set of 4) Stainless Steel (set of 4) W One Cab foot, no hardware (white) MillSupply.com /2 All Mirror Assemblies come with Cab Feet. W Loop Only, Span 35.5, White (less cab feet) Q Loop Only, Span 35.5, Flat Black (less cab feet) W Cab foot, White Q Cab foot, Flat Black Mirror Assembly w/preset, White, Pair Left Side Mirror Assembly w/preset, White Right Side Mirror Assembly w/preset, White Mirror Assembly w/preset, Flat Black, Pair Left Side Mirror Assembly w/preset, Flat Black Right Side Mirror Assembly w/preset, Flat Black Mirror Assembly w/preset, Stainless Steel, Pair Left Side Mirror Assembly w/preset, Stainless Steel Right Side Mirror Assembly w/preset, Stainless Steel Mirror Loop with 9.5 Depth. Fits Morgan Olson, Black M Rivet-nut Mounting Tool M /4-20 Mandrel M /16-18 Mandrel Used On Utilimaster MOUNTING HARDWARE RIVET-NUT - Designed for high speed installation of mirror assemblies. Builds nut right into the body of the vehicle. Leave the nut on the body for easy removal and reassembly. M /16-18 Rivet-Nut Grip Range: Quantity: 25/box M /4-20 Rivet-Nut Grip Range: Quantity: 40/box

6.5 x 10 FLAT GLASS HEADS DUAL HEAD MIRRORS VELVAC MIRROR HEADS & GLASS Mirror Heads do NOT Include Clamp Kit 6.

.. white steel head w/glass 704081... gray plastic head w/glass 704132... white plastic head w/glass 704152.

.. stainless steel head w/glass 704078... white steel head w/glass 704178... white plastic head w/glass 704159.

.. stainless steel head w/glass 704077... white steel head w/glass 704177... white plastic head w/glass 704153.

.. standard glass only, convex HEATED MIRROR HEADS Part No. Description 704315...6.5 x 6 Heated S.S. Mirror Head with Convex Glass & Wire Harness 704325.

Glass Only. 747053...Switch kit, controls 1 or 2 mirror heads.

PRESET & NON PRESET LOOPS 712979 Standard Spring Preset Kit.

748355 Heavy Duty Spring Preset Kit Improves holding force on mirrors with large loops or large heavy mirrors head combinations.

Lock Washer Elastic Locknut Instructions Repair worn detents on newer trucks or install preset feature on loops that never had it.

It fits over the rivets that were on the loop originally. The kit also comes with a spring to replace the rubber bushing.

If you have any truck mirrors without the preset feature, use this kit to give any loop presets without replacing the entire loop.

3 6.5 x 10 FLAT GLASS HEADS DUAL HEAD MIRRORS VELVAC MIRROR HEADS & GLASS Mirror Heads do NOT Include Clamp Kit 6.5 x 6 FLAT GLASS HEADS 6.5 x 6 CONVEX GLASS HEADS stainless steel head w/glass white steel head w/glass gray plastic head w/glass white plastic head w/glass black plastic head w/glass gray gasket for plastic heads glass only stainless steel head w/glass white steel head w/glass white plastic head w/glass black plastic head w/glass gray gasket for plastic heads glass only, flat stainless steel head w/glass white steel head w/glass white plastic head w/glass black plastic head w/glass gray gasket for plastic heads new style glass for steel heads standard glass only, convex HEATED MIRROR HEADS Part No. Description x 6 Heated S.S. Mirror Head with Convex Glass & Wire Harness x 10 Heated S.S. Mirror Head with Flat Glass & Wire Harness x 10 Flat glass for heated mirror heads. Glass Only Switch kit, controls 1 or 2 mirror heads. Includes: dash mounted switch with light, terminals, wire ties, grommets and 6 wire SPRING LOADED PRESET REPAIR KITS FOR EXISTING PRESET & NON PRESET LOOPS Standard Spring Preset Kit. Replacement kit for mirrors with standard Velvac spring preset and used to upgrade mirrors with rubber washer preset Heavy Duty Spring Preset Kit Improves holding force on mirrors with large loops or large heavy mirrors head combinations. Each kit contains: Hex Head Pivot Bolt Two Flat Washers Retaining Cap Nylon Washer Tension Spring Rivet Plate Lock Plate Int/Ext Lock Washer Elastic Locknut Instructions Repair worn detents on newer trucks or install preset feature on loops that never had it. If the rivets (detents) are worn out on your loops, use this kit. The stamped stainless steel plate has the detents pressed in. It fits over the rivets that were on the loop originally. The kit also comes with a spring to replace the rubber bushing. No more guesswork for adjusting the tension on the assembly. If you have any truck mirrors without the preset feature, use this kit to give any loop presets without replacing the entire loop. RUBBER PRESET HARDWARE KIT FOR EXISTING PRESET LOOPS Replacement kit for mirrors with Velvac rubber preset pivots and Velvac mirrors with rubber washer style presets. Uses 5/16-18 x 1-1/2 stainless steel bolt. Enough for one complete Velvac preset pivot end. MIRROR HEAD MOUNTING CLAMPS FOR 3/4 OR 1 TUBING SS /4 Clamp with bolt SS /4 Twist Clamp. Mounts on vertical leg of loop SS /4 Clamp, Mounts on horizontal leg of loop Dovetail Clamp for 1 loop to mount spot mirrors

164 SPRINTER AND CROSS VIEW MIRRORS MIRRORS FOR SPRINTER VANS Replacement mirror assemblies make it easy to add the safety of Velvac s

com BREAK-AWAY REAR CROSSVIEW SYSTEM Allows mirror to pivot when struck by an object.

.. MB-647 10 Mirror Head Only, Stainless Steel... 709218 715704 - Side Mirror Assembly (PAIR). Includes: mirror heads and loop.

704152 - Replacement 6-1/2 x 10 flat glass mirror head, black plastic 704153 - Replacement 6-1/2 x 6 convex mirror head, black plastic

6-1/2 x 10 upper flat glass head and 6-1/2 x 6 lower convex provide a great view of passing lanes and blind spot areas around the

existing pivot system allowing mirrors to fold forward and back for added safety and convenience Black powder coated brackets and

combination with Velvac s wide angle mirror system (shown above) this new back-up mirror system provides the Sprinter driver with the

Features a 10 molded convex mirror for optimum visibility and adjustment.

4 164 SPRINTER AND CROSS VIEW MIRRORS MIRRORS FOR SPRINTER VANS Replacement mirror assemblies make it easy to add the safety of Velvac s wide angle mirror system to any Sprinter van MillSupply.com BREAK-AWAY REAR CROSSVIEW SYSTEM Allows mirror to pivot when struck by an object. Stainless Steel Arm and Mirror Head Break-Away System with mirror head Mounting Bracket only with mounting hardware... MB Mirror Head Only, Stainless Steel Side Mirror Assembly (PAIR). Includes: mirror heads and loop. (Base not included) (Assemblies mount to existing OE base) Does not fit 2007 and newer Sprinter vans Replacement 6-1/2 x 10 flat glass mirror head, black plastic Replacement 6-1/2 x 6 convex mirror head, black plastic Mirror assy does not include mount base. 6-1/2 x 10 upper flat glass head and 6-1/2 x 6 lower convex provide a great view of passing lanes and blind spot areas around the sides of the vehicle Designed to mount directly to the OE mirror mounting base in minutes Cast aluminum mounting ends attach to existing pivot system allowing mirrors to fold forward and back for added safety and convenience Black powder coated brackets and molded mirror heads match existing mounting bracket and vehicle trim REAR CROSS VIEW MIRRORS FOR SPRINTER VANS When used in combination with Velvac s wide angle mirror system (shown above) this new back-up mirror system provides the Sprinter driver with the view directly behind the vehicle for added blind spot coverage. Features a 10 molded convex mirror for optimum visibility and adjustment Back-Up Safety Mirror System with 10 diameter mirror head that fits Sprinter Vans. Stainless steel tube bracket with aluminum mounting plates and stainless steel hardware Diameter mirror head only These safety systems provide the driver with the ability to view the dangerous blind spot area around the rear bumper of the vehicle. Being able to view this area before backing-up can help reduce accidents. Approximate field of vision when mirror is properly adjusted. Field of vision should include entire rear bumper as a reference.

REAR VIEW MIRRORS REAR VIEW SYSTEMS FOR STEP VANS 165 FIXED POSITION REAR

tubing arm, heavy duty mounting bracket, and stainless steel hardware.

..712643 Stainless Steel Mirror Head Only...709218 S.S. Bracket Kit Only.

Rebound TM Technology allows the wrap around mirror arm, not the mirror

Rebound TM Technology springs the arm back in its original place when the

Although the mirror head comes standard with an acrylic unbreakable 11

always remain properly adjusted for safe and effective rear cross viewing.

Side Mount Rebound TM System... 61-020 Rear Mount Rebound TM System.

, center mount stud, fits all tubular brackets, Black.

Spot Mirror with L bracket, center mount stud 61-485 - The Wedge Corner

5-1/2 x 7-1/2 Rectangular Spot Mirror with 1/4 Ball Stud, Bright.

hole 712245 Wide Angle Conversion kit. Includes 6 x 6.

5 REAR VIEW MIRRORS REAR VIEW SYSTEMS FOR STEP VANS 165 FIXED POSITION REAR CROSSVIEW SYSTEMS A universal mounting bracket lets this mirror mount to any flat surface. Kit includes: 10 wide view mirror head, reinforced 3/4 O.D. tubing arm, heavy duty mounting bracket, and stainless steel hardware. 10 WHITE ASSEMBLY Complete Assembly White Mirror Head Only A White Bracket Kit Only STAINLESS STEEL ASSEMBLY Complete Assembly Stainless Steel Mirror Head Only S.S. Bracket Kit Only REBOUND TM TECHNOLOGY REAR CROSSVIEW SYSTEM Rosco s patented Rebound TM Technology allows the wrap around mirror arm, not the mirror head, to be hit. Rebound TM Technology springs the arm back in its original place when the vehicle moves away from the obstruction. Although the mirror head comes standard with an acrylic unbreakable 11 convex lens, Rebound TM auto-return technology allows the mirror head to always remain properly adjusted for safe and effective rear cross viewing. Stainless steel mirror, arm, mount and hardware. Side Mount Rebound TM System Rear Mount Rebound TM System Dia. with Stud & Clamp on Mtg., center mount stud, fits all tubular brackets, Black Same but Stainless Steel /2 Dia. Spot Mirror with L bracket, center mount stud The Wedge Corner Mount Spot Mirror 3-3/8 Overall size STUD MOUNT SPOT MIRRORS /2 x 7-1/2 Rectangular Spot Mirror with 1/4 Ball Stud, Bright. SS /4 Clamp with bolt Two piece Dovetail Clamp with 3/8 hole Wide Angle Conversion kit. Includes 6 x 6.5 stud mount mirror head and 3/4 O.D. arm STICK-ON SPOT MIRRORS dia dia /4 dia /2 Dia. Heated Spot Mirror, stainless steel, with L bracket, offset stud /2 Dia. Spot Mirror. stainless steel with L bracket, with 1/4 offset stud Stainless steel L Bracket x 5-1/ Spot Mirror, 2.5 x 3.25 with 7.3 sq. in. viewing area. Mounts directly to OE side mirror, 1 pair.

166 MIRRORS VELVAC 2020 & 2020XG MIRRORS 800-888-5072 MillSupply.

for tight spaces. This new mirror replaces the original equipment mirrors and installs in existing mounting pockets using factory mounting holes.

Key M Manual Head Control H Heated Mirror Head R Remote Head Control L Lighted Arm 2020 DELUXE HEAD Deluxe heads include adjustable flat and convex glass.

Pair RH LH Pair RH LH 86 Standard M 715401 715402 715403 86 Standard H/R 715419 715420 715421 96 Standard M 715404 715406 715405 96 Standard H/R 715422 715424 715423 96 Standard/L H/R 715455 715456

Pair RH LH Pair RH LH 78 Deluxe M M 7183895 7183905 7183915 86 Standard M 714601 714602 714603 86 Standard H/R 714604 714606 714605 86 Deluxe M M 714591 714592 714593 96 Standard M 714557 714558

716353 VELVAC 2020 MIRROR HEADS & GLASS Mirror Heads - Black Description Deluxe RH Deluxe LH Standard RH Standard LH Black Manual Head* 714580 714579 714575 714575 Black H/R Flat - Man.

6 166 MIRRORS VELVAC 2020 & 2020XG MIRRORS MillSupply.com These mirror assemblies feature the original appearance and unique pivot design which allows the mirror to rotate safely 80 o forward or rearward if impacted or when manually pivoting the mirror for tight spaces. This new mirror replaces the original equipment mirrors and installs in existing mounting pockets using factory mounting holes. Foldaway mirrors return to preset driving position without readjustment or need for tools. Key M Manual Head Control H Heated Mirror Head R Remote Head Control L Lighted Arm 2020 DELUXE HEAD Deluxe heads include adjustable flat and convex glass. 2020XG HEAD 2020 Assembly Standard Head Body Width Head Top Bot. Pair RH LH Pair RH LH 86 Standard M Standard H/R Standard M Standard H/R Standard/L H/R Deluxe M M Deluxe/L H/R H/M XG Body Width Head Top Bot. Pair RH LH Pair RH LH 78 Deluxe M M Standard M Standard H/R Deluxe M M Standard M Standard H/R Standard/L H/R Deluxe M M Deluxe/L H/R H/M VELVAC 2020 MIRROR HEADS & GLASS Mirror Heads - Black Description Deluxe RH Deluxe LH Standard RH Standard LH Black Manual Head* Black H/R Flat - Man. Convex* Black 2015 Head** Glass Kits Manual Flat Glass only Heated Flat Glass only - H/M Heated Convex Glass - H/M Convex Repair Kit*** Wedge Convex Stick-On * Includes set screw ** Includes elbow attachment, 2 screws *** Includes glass, inner housing, clip & actuator VELVAC 2020XG MIRROR HEADS & GLASS Standard heads feature one piece flat glass plus a stick-on convex wedge mirror. 2020XG Mirrror Heads 2020XG Convex Glass Only 2020XG Flat Glass Only Description Right Head Assy Left Head Assy Right Glass Left Glass Right Glass Left Glass Manual - Non-heated Remote Heated Flat Glass with Manual Heated Convex Glass 2020 Assembly Deluxe Head 2003 & NEWER FORD E-SERIES CUTAWAY VAN MIRRORS - BLACK 1997 & NEWER CHEVY/GMC EXPRESS/SAVANNA MIRRORS - BLACK Mirror heads are black in color 2020XG Assembly Deluxe Head 2020 STANDARD HEAD Replacement Glass is only available heated but can be used in non-heated mirrors.

MIRRORS VELVAC 2025 MIRRORS POPULAR ON UTILIMASTER AND U.C.B.

Mirror Head with Heated/Remote Glass 713802 - Passenger Side - Black, Deluxe Mirror Head with Heated/Remote Glass 167 MANUALLY ADJUSTABLE FLAT & CONVEX

Manually Adjustable Glass MIRROR HEADS AND PARTS 714579 - Left Deluxe Manual Mirror Head with flat glass on top with and convex glass on bottom, manual

709448 - Flat Glass Kit for heated and non-heated applications. Used on left or right. 709449 - Convex Glass Kit for heated and non-heated applications.

Includes heated convex glass, inner housing, retaining clip and actuator. Fits left or right.

Universal door mount mirrors. For use on vehicles with up to 96 wide bodies. Solid elbow & one piece lower tubing brace for mounting stability. 7.

This system offers a generous mirror viewing area on two separately adjustable mirror heads and allows drivers to optimize mirror angles and locations

7 MIRRORS VELVAC 2025 MIRRORS POPULAR ON UTILIMASTER AND U.C.B.C AND FOR TRUCKS & CLASS A RVS MIRROR SYSTEMS HEATED & REMOTE CONTROL FLAT GLASS - HEATED MANUAL CONVEX GLASS Driver Side - Black, Deluxe Mirror Head with Heated/Remote Glass Passenger Side - Black, Deluxe Mirror Head with Heated/Remote Glass 167 MANUALLY ADJUSTABLE FLAT & CONVEX GLASS Velvac Mirror System, Drivers Side, Black. Manually Adjustable Glass Velvac Mirror System, Passenger Side, Black. Manually Adjustable Glass MIRROR HEADS AND PARTS Left Deluxe Manual Mirror Head with flat glass on top with and convex glass on bottom, manual adjustment, black Right Deluxe Mirror Head with flat glass on top with and full width convex glass on bottom, manual adjustment, black Flat Glass Kit for heated and non-heated applications. Used on left or right Convex Glass Kit for heated and non-heated applications. Used on left or right Lower convex repair kit for deluxe mirror head. Includes heated convex glass, inner housing, retaining clip and actuator. Fits left or right. UNIVERSAL MOUNT MIRROR KIT FORD TRANSIT CONNECT MIRROR SYSTEM FROM ROSCO 6651RB 6651LB Left and Right Stainless Steel Universal door mount mirrors. For use on vehicles with up to 96 wide bodies. Solid elbow & one piece lower tubing brace for mounting stability. 7.5 x 10.5 Flat glass mirror head Replacement Stainless Steel 90 degree elbow only. Designed specifical y for Ford Transit Connect vehicles. This system offers a generous mirror viewing area on two separately adjustable mirror heads and allows drivers to optimize mirror angles and locations to cover all blind spots and danger zones. This mirror system offers more than 50% more viewing surface area than standard mirrors. The wider field of view and the exceptional stability allows the mirrors to provide a clear image of the passing lanes and blind spots around the vehicle leading to improved safety and faster driver reaction time. 6651LB - LH Mirror Assembly 6651RB - RH Mirror Assembly

DUAL HEAD MIRROR SYSTEMS

170 REPLACEMENT DUAL HEAD MIRROR SYSTEMS Custom Wide Angle Mirror Systems for Walk-in Vans Custom mirror systems all include 6.5 x 10 upper flat glass and 6.5 x 6 lower convex glass mirror heads. Replacement