BRAKES. Brake Hoses. Brake Master Cylinder and Components. Blazer Jimmy Blazer Jimmy

Size: px
Start display at page:

Download "BRAKES. Brake Hoses. Brake Master Cylinder and Components. Blazer Jimmy Blazer Jimmy"

Transcription

1 Brake Hoses How to ID Brakes See Below BRAKES Rear Brake Hose 7 Front Brake Hoses - FRONT BRAKE HOSE-LH WD FRONT BRAKE HOSE-RH WD FRONT BRAKE HOSE-LH WD FRONT BRAKE HOSE-RH WD FRONT BRAKE HOSE-LH A WD FRONT BRAKE HOSE-RH A WD FRONT BRAKE HOSE WD 7-78 () FRONT BRAKE HOSE WD () Front Brake Hose Left Hand (LH) & Right Hand (RH) Means as You Sit Facing Forward in the Truck - FRONT BRAKE HOSE-LH WD FRONT BRAKE HOSE-RH WD Note: "A" With -/" brakes. Brake Master Cylinder and Components How to Identify Your Rear Brakes: " Brakes have " wide brake shoes. -/" Brakes have -/" wide brake shoes. Core Refund Information - Brake Booster: A rebuildable core will have no excessive wear. No broken, cracked or dented housings. No worn or stripped threads. If it does not meet the above standards, it is not rebuildable and will not be refunded. DO NOT send a non-rebuildable core. -0 BRAKE MASTER CYL A WD BRAKE MASTER CYL A WD BRAKE MASTER CYL B WD BRAKE MASTER CYL A WD Rear Brake Hoses - REAR BRAKE HOSE WD REAR BRAKE HOSE WD Pre-Bent Stainless Steel Brake Line Kits Blazer Jimmy Install it once and forget it. Replacing your original brake lines with Stainless Steel Brake Lines increases the longevity of your brake line system. High-quality stainless steel is used so your new brake lines will last and last. Call or go online and order your new Stainless Steel Brake Line Kit today. - BRAKE LINE KIT-8PC-STANDARD WD BRAKE LINE KIT-8PC-POWER WD BRAKE LINE KIT-9PC-POWER WD BRAKE LINE KIT-8PC-POWER WD BRAKE LINE KIT-8PC-POWER WD UNION-FRONT TO REAR BRAKE LINE Pre-Bent Original Material Brake Lines Blazer 97-8 Jimmy BRAKE MASTER CYL WD BRAKE MASTER CYL WD BRAKE MASTER CYL WD BRAKE MASTER CYL C WD BRAKE MASTER CYL B WD Z () BOOSTER-REMAN D $ CORE Z BOOSTER-REMAN E $ CORE Z BRK BOOSTER-REMAN $ CORE Z BRK BOOSTER-REMAN $0 CORE () CHECK VALVE-BOOSTER () AIR FILTER-BOOSTER () BOOSTER LINE 0 07 BBL BOOSTER LINE 0 BBL BOOSTER LINE 0 07 BBL BOOSTER LINE 0 BBL Note: "A" With power brakes. "B" Models with power brakes and gas engines. "C" Models with power brakes and diesel engines. "D" With -/" rear brakes. "E" With " brakes. Box 99 Lenexa, KS LMC-TRUCK Front Brake Line Set Brake Line Union Rear Brake Line Set PWR = Power STD = Standard PC = Two Piece PC = Four Piece -70 BRAKE LINE SET-FRONT-PC STD WD BRAKE LINE SET-FRONT-PC PWR WD BRAKE LINE SET-FRONT-PC PWR WD BRAKE LINE SET-REAR AXLE-PC WD BRAKE LINE SET-REAR AXLE-PC WD UNION-FRONT TO REAR BRAKE LINE

2 8 Rear Disc Brake Conversion Kit PERFORMANCE BRAKES Rear Disc Brake Kit will work with " or larger wheels. Disc Brake Proportioning Valve #7-8 is also required. Kit contains: " Standard or Performance Cross Drilled/Slotted Rotors Single Piston Calipers with Pads Parking Brake Cable Extenders Brake Hoses Pre-bent Rear Brake Lines Mounting Brackets and Hardware Upgrade your truck's brakes with a Rear Disc Brake Conversion Kit. Rear disc brakes improve your truck's braking system and provide reliable, all-weather performance. Rear Disc Brake Conversion Kit will convert your rear drums to " rotors with single piston calipers. Kits are available with either standard or cross drilled/slotted rotors for better performance, longer life and cooler braking temperatures. Front Slotted Cross Drilled Rotors Increase the braking ability of your truck by installing Slotted Cross Drilled Rotors. Performance brake rotors provide shorter stopping distances, lessen fade and improve wet-weather braking. Chamfered cross drilled holes allow built-up heat and gases to dissipate, lowering rotor temperature by up to 00, prolonging rotor and pad life. The curved slots deglaze the brake pads, reduce brake fade and -70 minimize brake dust. The rotors are CNC machined and feature a silver zinc coating to protect against corrosion. -70 SLOTTED/DRILLED ROTOR SET WD SLOTTED/DRILLED ROTOR SET WD Stainless Steel Brake Hose Sets Blazer 97-8 Jimmy Brake Hose Sets feature stainless steel braided hose with zinc-plated fittings, factory assembled for installation convenience. Stainless steel brake hoses increase braking performance and reduce brake pedal travel by eliminating hose expansion common to factory rubber hoses. Each set comes with all necessary hardware and fittings REAR DISC BRAKE KIT-STANDARD WD REAR DISC BRAKE KIT-PERFORMANCE WD PROPORTIONING VALVE- WHEEL DISC WD DISC BRAKE ROTOR WD 7-8 () ROTOR SET-CROSS DRILLED/SLOTTED WD PAD SET-PERFORMANCE WD Proportioning Valve Switch Connector CONNECTOR-PROPORTIONING VALVE Brake and Clutch Fluids Meet Your Safety Standards Castrol Brake and Clutch Fluid exceeds DOT and DOT specifications and is recommended for all vehicles with these requirements. Unique synthetic formulation provides maximum protection against vapor lock failure. Available in a -ounce bottle. Silicone Brake and Clutch Fluid meets DOT requirements and is best for extended use; it won't absorb water that can cause corrosion. Silicone Brake Fluid will not harm painted surfaces. Available in a -ounce bottle. Not compatible with DOT or DOT brake fluid. Not for use in vehicles equipped with ABS. -80 STAINLESS BRAKE HOSE SET WD STAINLESS BRAKE HOSE SET WD CASTROL BRAKE/CLUTCH FLUID DOT SILICONE BRAKE/CLUTCH FLUID DOT Box 99 Lenexa, KS

3 Front Disc Brake Components BRAKES Caliper sets include: Bushings, O-rings, Grommets and Bleeder Screws. Disc Brake Pads are sold separately. 9 Core Refund Information - Calipers: A rebuildable core will have no excessive wear. Caliper must be assembled. No worn, damaged or cracked castings. No damaged bleeder screw threads or seat. No worn or elongated mounting points. If it does not meet the above standards, it is not rebuildable and will not be refunded. DO NOT send a non-rebuildable core. -9-Z CALIPER SET $0 CORE WD Z CALIPER SET $ CORE WD Z CALIPER SET $ CORE WD Z CALIPER SET $ CORE WD Z CALIPER SET $0 CORE WD () CALIPER BOLT 7-9 () () DISC BRAKE PAD SET () DISC BRAKE ROTOR WD 7-80 () DISC BRAKE ROTOR A WD 8-8 () DISC BRAKE ROTOR WD 7-9 () () CALIPER HARDWARE KIT CALIPER HARDWARE KIT () CALIPER REPAIR KIT 7-87 () (7) DISC BRAKE SHIELD SET WD Note: Note: "A" "A" With With -/" -/" rear rear brakes. brakes. Rear Drum Brake Components How to Identify Your Rear Brakes: " Brakes have " wide brake shoes. -/" Brakes have -/" wide brake shoes. Kit components may vary from illustration depending on your truck's model. - REAR WHEEL CYL-LH REAR WHEEL CYL-RH REAR WHEEL CYL WD 7-78 () REAR WHEEL CYL WD 79-8 () REAR WHEEL CYL A WD 7-7 () REAR WHEEL CYL B WD 7-7 () REAR WHEEL CYL WD 7-9 () () BRAKE SHOE SET WD BRAKE SHOE SET A WD BRAKE SHOE SET B WD BRAKE SHOE SET BRAKE SHOE SET Note: "A" With " rear brakes. Box 99 Lenexa, KS LMC-TRUCK "B" With -/" rear brakes. -9 () BRAKE DRUM-REAR A WD 7-7 () BRAKE DRUM-REAR B WD 7-8 () BRAKE DRUM-REAR A WD 7-7 () BRAKE DRUM-REAR B WD 7-9 () () BRAKE HARDWARE KIT BRAKE HARDWARE KIT () SELF ADJUSTER KIT-LH A SELF ADJUSTER KIT-RH A SELF ADJUSTER KIT-LH B SELF ADJUSTER KIT-RH B () PARK BRAKE LEVER B 7-9 () 8.9.9

4 0 Parking Brake Cables Blazer 97-8 Jimmy BRAKES PARKING BRAKE PEDAL ASSY () PARK BRAKE RELEASE HANDLE () BOLT () WASHER 7-8 () () NUT 7-8 ().8.0 Wheel Drive Brake Cables -8 () FRONT CABLE WD (7) INTER CABLE WD (8) REAR CABLE WD 7-8 () (9) BRAKE CABLE SEAL SET WD (0) CONNECTOR-BRAKE CABLE WD 7-8 () () EQUALIZER-INTER CABLE WD () CABLE RETAINER WD 7-8 ().. -7 () INTER CABLE GUIDE WD 7-78 () INTER CABLE GUIDE-LH WD INTER CABLE GUIDE-RH WD () INTER CABLE FRONT GUIDE WD Parking Brake Cables Blazer 98-9 Jimmy 98-9 Left Hand (LH) & Right Hand (RH) Means as You Sit Facing Forward in the Truck Wheel Drive Brake Cables -8 () FRONT CABLE WD (8) REAR CABLE WD 7-80 () REAR CABLE WD 8-8 () (9) BRAKE CABLE SEAL SET WD (0) CONNECTOR-BRAKE CABLE WD 7-8 () () EQUALIZER-INTER CABLE WD () CABLE RETAINER WD 7-8 ().. -7 () INTER CABLE GUIDE-LH WD INTER CABLE GUIDE-RH WD PARKING BRAKE PEDAL ASSY () PARK BRAKE RELEASE HANDLE () BOLT () WASHER 8-9 () () NUT 8-9 () () FRONT CABLE (9) GROMMET-CABLE BRACKET 8-9 () (0) CONNECTOR-BRAKE CABLE () NUT () EQUALIZER-BRAKE CABLE (7) REAR CABLE-LH (8) REAR CABLE-RH () BOLT () LOCK WASHER Box 99 Lenexa, KS

5 Ceramic Coated Headers Ceramic Coated Headers combine improved exhaust flow for more horsepower with exceptional corrosion resistance. The bright ceramic protective coating not only allows for long-term good looks but also provides thermal protection up to 00 F, reduces underhood temperatures and won't discolor or peel off like chrome or paint. Headers feature /8" thick laser-cut flanges and gauge, -/8" diameter full-length primary tubes with " collectors to reduce back pressure for improved engine performance versus stock exhaust manifolds. Includes exhaust flange and collector adaptor mounting hardware and gaskets. When installing #-0 it is necessary to cut existing lead pipes to attach to the new -bolt " x -/" header adaptor pipes included with header set. DO NOT install ceramic coated headers while breaking in a new engine. This WILL result in damage to the ceramic coating. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Use exhaust manifolds or old exhaust headers during new engine break-in period. Use of heat wraps may cause header tubes to crack and is not recommended. Ceramic Coated Header Set #-0 is USA Street Legal ONLY on models not equipped with factory catalytic converter. HEDMAN Headers are built to last and backed by a Limited Lifetime Warranty. Tests have shown a. second improvement in 0 to 0 second times. You can expect up to a 0% increase in horsepower and up to a 0% increase in gas mileage. These headers have " collector tubes to give you excellent exhaust flow, reducing back pressure and improving performance. Supplied complete with all nuts, bolts, gaskets and instructions needed for installation... even the decals! Call or go online and order yours today! Increases in fuel efficiency and horsepower are based on a truck operating at factory specifications. Increases may vary according to the condition of your truck and driving habits. When installing #-00 it is necessary to cut existing lead pipe to attach new header adaptor pipe that is included with Header Set. Headers listed below are USA Street Legal ONLY on models not equipped with factory catalytic converter -00 HEADER SET 0 0 A E WD HEADER SET A D E WD HEADER SET A C D E WD HEADER SET B C E WD HEADER SET A C D E WD HEADER SET A E WD HEADER SET B E WD A/C COMPRESSOR BRACKET HEADER SET - NOTE D ONLY A C E W/STD TRANS -008 HEADER SET - NOTE D ONLY B C E W/STD TRANS Not legal for sale or use on pollution controlled vehicles. Thermal Spark Plug Boot Sleeves provide unmatched thermal protection against hot exhaust headers. Double-layer gray fiberglass sleeves are non-conductive and can directly contact hot surfaces without any harmful effects. Box 99 Lenexa, KS LMC-TRUCK Exhaust Headers Spark Plug Boot Sleeve Set - See Below Thermal Spark Plug Boot Sleeve Set -90 SPARK PLUG BOOT SLEEVE SET.9.9 performance exhaust -0 HEADER SET 0-00 A B C D WD HEADER SET 0-00 A D WD A/C COMPRESSOR BRACKET Limited Lifetime Warranty -00 All Header Sets Below are -0 Note: "A" Without smog injection or injection heads. "B" Air conditioned equipped trucks with axial air compressor require bracket #-0. "C" Will not fit a small number of 97-7 trucks that were dealer modified moving the clutch cross shaft to a location under or behind the driver's side rear exhaust port. "D" Must modify rotary A/C bracket. -0 HEADER SET B C D E WD HEADER SET B C D E WD HEADER SET B E WD A/C COMPRESSOR BRACKET HEADER SET - NOTE D ONLY B C E W/STD TRANS Note: "A" Without smog injection or injection heads. "B" With smog injection or injection heads. "C" Air conditioned equipped trucks with axial air compressor require bracket #-0. "D" A small number of 97-7 trucks with manual transmissions underwent a dealer modification moving the clutch cross shaft to a location under or behind the driver's side rear exhaust port. If your truck was modified as such, you must order either #-00 or #-008. Check for your application. "E" Must modify rotary A/C bracket. Chemically-resistant /" diameter braided sleeves easily slip over any spark plug wire and boot configuration to protect from exhaust temperatures up to 00 F. Available as a two-piece set. Call or go online and order yours today! -90

6 Replacement Catalytic Converters Blazer 97-9 Jimmy 97-9 exhaust Limited Manufacturer's Warranty CATALYTIC CONVERTER CATALYTIC CONVERTER CATALYTIC CONVERTER CATALYTIC CONVERTER CATALYTIC CONVERTER In August 98 the U.S. Environmental Protection Agency issued strict new guidelines regulating aftermarket Catalytic Converters. Our Replacement Catalytic Converters are designed and manufactured to meet EPA emission requirements. With many states getting more stringent with their emission testing, we are pleased to be able to offer you a reasonably priced, proven and tested product that is legal for road use in 9 states and Canada. Replacement converters are not legal for sale or use in California. Turbo Mufflers... Reduce Noise without Restricting Power Highest quality turbo-style mufflers which can be used as OE replacements as well as on custom exhaust systems. -00 Turbo Mufflers Galvanized, double wrapped muffler casing for maximum rust protection. Spot welded, louvered baffles to eliminate vibration. Reverse flow so that muffler can be inverted. Spun end caps for gas tight seal. Part # Inlet Outlet -00 " " -0 -/" -/" -0 -/" -/" These mufflers are specially designed to reduce and control noise without excessively restricting power. Made from the finest quality materials. -00 Turbo Header Mufflers Has the same qualities as the Turbo Mufflers and has a " flange to bolt-up directly to most headers. Part # Inlet Flange Inlet Outlet -00 " -bolt -/" -/" -00 HEDMAN TURBO MUFFLER X HEDMAN TURBO MUFFLER -/ X -/ HEDMAN TURBO MUFFLER -/ X -/ Chrome Exhaust Tips -00 HEDMAN TURBO HEADER MUFFLER -/ X -/ Stainless Steel Exhaust Tips Angled Tip Chrome Exhaust Tips are triple chrome plated for a lasting deep finish. Available in both Angled and Blunt Outlets. They are 9" long and are available in two sizes; -/" made to fit -/" outer diameter exhaust pipes and -/" made to fit -/" outer diameter exhaust pipes. Chrome Exhaust Tips can be easily installed with exhaust clamps that are included with tips or welded on for a smoother look. 8-8 EXHAUST TIP-CHROME W/CLAMP -/ ANGLE TIP EXHAUST TIP-CHROME W/CLAMP -/ ANGLE TIP EXHAUST TIP-CHROME W/CLAMP -/ BLUNT TIP EXHAUST TIP-CHROME W/CLAMP -/ BLUNT TIP Stainless Steel Exhaust Deflector Blunt Tip Exhaust Deflector is made from stainless steel for extended life and includes hardware EXHAUST DEFLECTOR W/BOLT&NUT BLAZER 7-9 A/R.9.9 Blunt Tip Angled Tip Stainless Steel Exhaust Tips are made from gauge 0 grade stainless steel for longer life. Available in both Angled and Blunt Outlets. They are " long with -/" diameter outlets. Two inlet sizes are available; -/" made to fit -/" outer diameter exhaust pipes and -/" made to fit -/" outer diameter exhaust pipes. Exhaust Tips can be welded on for a smooth fit or clamped on with #-00 or #-0 Stainless Steel Exhaust Clamps. Clamps are not included with tips and must be purchased separately EXHAUST TIP-STAINLESS STEEL -/ BLUNT TIP EXHAUST TIP-STAINLESS STEEL -/ ANGLE TIP CLAMP-STAINLESS STEEL -/ EXHAUST TIP-STAINLESS STEEL -/ BLUNT TIP EXHAUST TIP-STAINLESS STEEL -/ ANGLE TIP CLAMP-STAINLESS STEEL -/ Box 99 Lenexa, KS

7 performance exhaust Complete High Performance Bolt-On Exhaust Systems Connect without Welding Performance Glass Pack Dual and Performance Turbo Dual Exhaust Systems Only on Models Not Equipped with Factory Catalytic Converter With -/" tailpipes, these Dual Exhaust Systems reduce exhaust restriction and back pressure for increased horsepower and better fuel economy. Complete with bolt-on connectors that adapt to your stock manifold... no welding necessary! All parts and hardware for standard installation are included. -8 The standard stock exhaust system of a truck with a 0 engine is a single -/" pipe. This means that you will be getting an 80% increase in exhaust flow, increasing horsepower by up to 8% and improving fuel efficiency and low end torque at the same time. Increases in fuel efficiency and horsepower are based on a truck operating at factory specifications. Increases may vary according to the condition of your truck and driving habits. Manufactured from gauge aluminized steel. Lasts up to twice as long as conventional plain steel systems. * After the sell price means Oversize Part Charge. Your order will incur a charge of $0.00 for each oversized part. Additional delivery time required. Made with modern tube benders utilizing mandrel bends ensuring each bend is smooth flowing, increasing exhaust flow by up to 0% over stock systems. Call or go online and order yours today! These are longbed systems. Front extension pipes will need to be cut to fit. Some models were equipped with catalytic converters. Check yours before ordering. PART PART DESCRIPTION AND APPLICATION LIST Performance Glass Pack Dual Exhaust Systems SELL DESCRIPTION AND APPLICATION Performance Turbo Dual Exhaust Systems LIST SELL Glass pack exhaust systems have bullet shaped, straight through glass pack mufflers to reduce back pressure and give that aggressive rumble you want. Turbo exhaust systems have -/" in and out flow turbo mufflers to reduce back pressure and give that great low exhaust tone you expect from your truck. -77 DUAL GLASS-PACK 0 0 WD * -7 DUAL TURBO EXH 0 0 WD * -87 DUAL GLASS-PACK WD * -8 DUAL TURBO EXH WD * -9 REPLACEMENT GLASS PACK MUFFLER USE FOR PARTS -77/ REPLACEMENT TURBO MUFFLER USE FOR PARTS -7/ Exhaust Header Reducers Make your exhaust change or repair easy with a Header Reducer Set. Whether adding a new set of headers to your existing exhaust or building an entirely new system, these are some of the most important pieces you'll need to complete your project. Header Reducers have " collectors and are available to fit exhaust pipe sizes from -/" to ". Reducer Gasket Set is a replacement for " flange style reducers. Bolt Flange Style GASKET SET-REDUCER TO -/ TO -/ TO TO -/ TO -/ TO Ball Flange Style High Amp Alternators Blazer Jimmy Do you need more amperage to run today's modern accessories? These high amp alternators will give your truck the charging power it needs. Direct replacement for your original alternator. Features include high output with excellent idle performance; hand-wound, custom-designed stators; gold-plated battery post for better electrical connections; and "Proof of Performance" tag. PART DESCRIPTION AND APPLICATION REQD LIST SELL A 00AMP &8 CYL -CHRM A 00AMP &8 CYL SERPENTINE PULLEY &8 CYL A 0AMP &8 CYL -CHRM A 0AMP &8 CYL B 0AMP V8 -CHRM B 0AMP V8 SERPENTINE PULLEY-CHROME &8 CYL B 00AMP truck.com V8 Box BRACKET SET-CHROME BRACKET SET-BLACK BRACKET SET-CHROME BRACKET SET-BLACK SLEEVE- MOUNT BOLT- MOUNT C Note: "A" Alternator includes a V-Belt pulley. Serpentine pulley must be ordered separately. "B" Alternator includes a serpentine pulley. "C" Cut to length as required. Lenexa, KS LMC-TRUCK

DIFFERENTIAL. OL = Overall Length

DIFFERENTIAL. OL = Overall Length 3 Rear Axle Shafts Blazer 3- Jimmy 3-34-4 REAR AXLE SHAFT -/ GEAR WD BLZ JIM 3- ().44 4. 34- REAR AXLE SHAFT -/ GEAR WD BLZ JIM - () 4.4. 34- REAR AXLE SHAFT -/ GEAR 4WD BLZ JIM 3- ().44 4. 34- REAR AXLE

More information

BODY. 28 Hood Components Blazer Jimmy Hood Components Blazer Jimmy Hood Brace Kit... Gets the Kinks Out

BODY. 28 Hood Components Blazer Jimmy Hood Components Blazer Jimmy Hood Brace Kit... Gets the Kinks Out Hood Components Blazer -0 Jimmy -0 See Page BODY Hood Components Blazer - Jimmy - v 0 0 This easy-to-use Hood Hinge Spring Tool provides a safe and economical way to replace your wornout hood hinge springs.

More information

Sudden Stop Ahead! Is Your Trailer Equipped with Nev-R-Adjust Brakes?

Sudden Stop Ahead! Is Your Trailer Equipped with Nev-R-Adjust Brakes? www.dexteraxle.com Sudden Stop Ahead! Is Your Trailer Equipped with Nev-R-Adjust Brakes? Road hazards appear suddenly without warning. With a trailer behind you there s no time to second guess your ability

More information

L88 Air Cleaner AIR CLEANER

L88 Air Cleaner AIR CLEANER 1968-1982 PARTS Air Cleaners Lid #29760 Foam Only #2507 Screen Only #32943 Hose #33479 Stud #28962 PCV Hose #33476 1968-1969 427 3X2 AIR CLEANER Gaskets #28960 #20888 #20887 #20886 1968-1972 Air Cleaner

More information

A 1 SERVICE SPECIFICATIONS

A 1 SERVICE SPECIFICATIONS A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm

More information

Since 1995, Power Stop has earned an outstanding reputation for providing high quality brake parts at a great value. Our products are specially formulated for the demanding auto enthusiast. We are the

More information

A/F/X Body GM Installation Instructions Manual Disc Conversion

A/F/X Body GM Installation Instructions Manual Disc Conversion A/F/X Body GM Installation Instructions Manual Disc Conversion 64-72 A Body / 67-69 F Body / 62-74 X Body DBMC09 & PVK71 pictured above (Booster, master & valve setups may vary by upgrades selected) Your

More information

Axle Components. 12,000 lbs. Capacity

Axle Components. 12,000 lbs. Capacity 12,000 lbs. Heavy Duty Components 27-358 Unitized Oil Seal - disc or drum (Dimensions are 3.125 x 4.506 x.605) 2 010-056-00 27-342 3984 Inner Bearing (Inside diameter 2.625 ) 3 031-020-02 27-343 3920 Inner

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC2001, RC2001X Applications: Mopar 8-3/4 & 9-3/4 Rear Axles Thank you for choosing Leed Brakes for your automotive product needs. Before

More information

A/F/X Body GM Installation Instructions Manual Disc Conversion

A/F/X Body GM Installation Instructions Manual Disc Conversion A/F/X Body GM Installation Instructions Manual Disc Conversion 64-72 A Body / 67-69 F Body / 62-74 X Body DBMC09 & PVK71 pictured above (Booster, master & valve setups may vary by upgrades selected) Your

More information

PARTS CATALOG ODYSSEY INCLUDES MOWER

PARTS CATALOG ODYSSEY INCLUDES MOWER PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL

More information

BRAKE LINE KITS FRONT DISC BRAKE CONVERSION KITS FORD FRONT BRAKE CONVERSIONS AXLE FLANGE DIAGRAMS. No Brainer. Kits Starting at 834.

BRAKE LINE KITS FRONT DISC BRAKE CONVERSION KITS FORD FRONT BRAKE CONVERSIONS AXLE FLANGE DIAGRAMS. No Brainer. Kits Starting at 834. FORD FRONT BRAKE CONVERSIONS STREET FRONT CONVERSIONS INCLUDE: 11 Rotors Dust Caps New 4-Piston Calipers Castle Nuts & Pins Caliper Brackets Washers Organic Pads Grease Seals Backing Plates Bearings Flex

More information

Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941

Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941 Air Cleaners #20888 #20887 Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941 Grommet SB Steel Valve Cover #33456 SB Alum. Valve Cover #33457 SB Alum. Valve Cover #32942 1968-1972

More information

U.S. COMMUNITIES DISCOUNT SCHEDULE EFFECTIVE THROUGH

U.S. COMMUNITIES DISCOUNT SCHEDULE EFFECTIVE THROUGH BATTERIES BATTERIES BATTERY ACCESSORIES CHARGERS, TERMINALS, CABLES -33% BATTERIES AUTOMOTIVE BATTERIES PREMIUM (PLATINUM) -33% BATTERIES AUTOMOTIVE BATTERIES BEST (GOLD) -33% BATTERIES AUTOMOTIVE BATTERIES

More information

ETON America PARTS CATALOG

ETON America PARTS CATALOG ETON America PARTS CATALOG Beamer Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering changes that can alter the appearance

More information

Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN

Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Parts Description 2 1/2 Ton Multi-Fuel Part Number NSN Filter, M49C Fuel Tanker 4330-00-983- CP20452-0 0998 Tube, M49C Fuel Tanker Pickup Element, Air cleaner 2940-00-804-10912373 7898 Cable, Engine Stop

More information

PERFORMANCE BRAKE SYSTEMS

PERFORMANCE BRAKE SYSTEMS 2013 PERFORMANCE BRAKE SYSTEMS StopTech Big Brake Kits Ultimate brake upgrades for road or track Larger rotors with patented cooling technology Stiffest calipers for reduced compliance Stainless Steel

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC BRAKE CONVERSION KIT A126-1 1973-87 CHEVROLET 1/2 TON 2WD Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time to

More information

Detroit Speed, Inc. Detroit Speed C7 Rear Full Floater Kit P/N: , , , , &

Detroit Speed, Inc. Detroit Speed C7 Rear Full Floater Kit P/N: , , , , & Detroit Speed, Inc. Detroit Speed C7 Rear Full Floater Kit P/N: 070512, 070607, 070616, 070626, 070636 & 070649 Thank you for purchasing the Detroit Speed Inc., C7 Rear Full Floater Kit. The Detroit Speed

More information

A/F/X Body GM Installation Instructions Power Disc Conversion

A/F/X Body GM Installation Instructions Power Disc Conversion A/F/X Body GM Installation Instructions Power Disc Conversion 64-72 A Body / 67-69 F Body / 62-74 X Body DBMC09, PVK71 & RPB1001 pictured above (Booster, master & valve setups may vary by upgrades selected)

More information

HUB - DRUMS - DISC JEEP CJ AVANT FRONT

HUB - DRUMS - DISC JEEP CJ AVANT FRONT HUB - DRUMS - DISC JEEP CJ 72-86 AVANT FRONT 1 300101 Wheel bearing seal drum brake (CJ 72-78) 2.125" spindle diameter 2 300102 Wheel bearing seal disc brake (CJ 77-86) 2.313" spindle diameter 3 300103

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC4001, RC4001X Applications: Mopar 7.25, 8.25, 9.25 Axles Thank you for choosing Leed Brakes for your automotive product needs. Before you

More information

INSTALLATION INSTRUCTIONS PERFORMANCE AT THE WHEELS KIT W125

INSTALLATION INSTRUCTIONS PERFORMANCE AT THE WHEELS KIT W125 INSTALLATION INSTRUCTIONS PERFORMANCE AT THE WHEELS KIT W125 1968-81 CAMARO & FIREBIRD 10 & 12 BOLT W/"C" CLIPS Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC1001, RC1001X Applications: 64-72 A-body, 67 F-Body, 63-67 X-body with Non Staggered Shocks Thank you for choosing GPS Auto for your automotive

More information

DBK FULL-SIZE CHEVY DISC BRAKE conversion KIT

DBK FULL-SIZE CHEVY DISC BRAKE conversion KIT DBK5964 1959-1964 FULL-SIZE CHEVY DISC BRAKE conversion KIT impala, bel air, biscayne Installation Instructions does not fit 14" rims must ust 15" or larger for this kit to be installed correctly on your

More information

DISCOUNT TRACTOR PARTS PH MASSEY FERGUSON 165 & 175 Wheel Tractors. Parts catalogue and price list

DISCOUNT TRACTOR PARTS PH MASSEY FERGUSON 165 & 175 Wheel Tractors. Parts catalogue and price list DISCOUNT TRACTOR PARTS PH 0800 872272 MASSEY FERGUSON 165 & 175 Wheel Tractors Parts catalogue and price list ALL PRICES PLUS GST & SUBJECT TO CHANGE Page 4 212 Engine cont. Top Gasket Set $60.84 Bottom

More information

Signature Series A/F/X Body GM Installation Instructions Power Disc Conversion

Signature Series A/F/X Body GM Installation Instructions Power Disc Conversion Signature Series A/F/X Body GM Installation Instructions Power Disc Conversion 64-72 A Body / 67-69 F Body / 62-74 X Body Your new disc brake conversion kit can be bolted up with standard hand tools. The

More information

BRAKE SYSTEM Nissan 240SX DESCRIPTION BRAKE BLEEDING * PLEASE READ FIRST * BLEEDING PROCEDURES ADJUSTMENTS BRAKE PEDAL HEIGHT SPECS TABLE

BRAKE SYSTEM Nissan 240SX DESCRIPTION BRAKE BLEEDING * PLEASE READ FIRST * BLEEDING PROCEDURES ADJUSTMENTS BRAKE PEDAL HEIGHT SPECS TABLE BRAKE SYSTEM 1990 Nissan 240SX 1990 BRAKE SYSTEMS Nissan Disc & Drum Axxess, Maxima, Pathfinder, Pickup, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION All brake systems are hydraulically operated

More information

Drawing Page Drawing Page

Drawing Page Drawing Page Contents Drawing Page Drawing Page L4 Engine...1 L4 Engine - Exploded View...2 V6 Engine...3 V6 Engine - Exploded View... 4 Oil Filter...5 VTEC (Variable Timing Electronic Control) System... 6 Fuel and

More information

BRAKE SYSTEM Return To Main Table of Contents

BRAKE SYSTEM Return To Main Table of Contents BRAKE SYSTEM Return To Main Table of Contents GENERAL... 2 BRAKE PEDAL... 10 MASTER CYLINDER... 13 BRAKE BOOSTER... 16 BRAKE LINE... 18 PROPORTIONING VALVE... 19 FRONT DISC BRAKE... 20 REAR DRUM BRAKE...

More information

Brake Systems. Introduction

Brake Systems. Introduction Brake Systems Figure 1. A Typical Brake System Introduction The brake system (Figure 1) is designed to slow and halt the motion of a vehicle. To do that, various components within a hydraulic brake system

More information

Tools, Equipment and Supplies Needed:

Tools, Equipment and Supplies Needed: 153-162 DISC BRAKE/DUAL MASTER CYLINDER CONVERSION Please take the time to read the enclosed instructions carefully. If you have any questions, call our Product Assistance personnel for clarifi cation.

More information

ETON America PARTS CATALOG

ETON America PARTS CATALOG ETON America PARTS CATALOG Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering changes that can alter the appearance of the

More information

2000 Saturn LS2. Fig. 2: Identifying Self-Adjuster Components (Drum Brakes) Courtesy of GENERAL MOTORS CORP. WHEEL CYLINDERS

2000 Saturn LS2. Fig. 2: Identifying Self-Adjuster Components (Drum Brakes) Courtesy of GENERAL MOTORS CORP. WHEEL CYLINDERS Fig. 2: Identifying Self-Adjuster Components (Drum Brakes) WHEEL CYLINDERS Raise and support vehicle. Remove brake shoes. See REAR BRAKE SHOES. Disconnect brake pipe from wheel cylinder. See Fig. 3. Remove

More information

Brake System Fundamentals Chapter 71 Name Date Period

Brake System Fundamentals Chapter 71 Name Date Period Brake System Fundamentals Chapter 71 Name Date Period Basic Brake System Matching 1. Metal tubing and rubber hose that transmit pressure to the wheel brake assemblies. 2. Mechanical system for applying

More information

GM FULL SIZE REAR DISC BRAKE KIT

GM FULL SIZE REAR DISC BRAKE KIT GM FULL SIZE REAR DISC BRAKE KIT This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left). If your axle flange measures 3 1/8 from center to center, you need

More information

Installation Instructions

Installation Instructions Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions Chevrolet & GMC C/K Pickup & Suburban 7.4L 1822S 1996-2000

More information

To Order Call (562)

To Order Call (562) 451 Park Industrial Dr. La Habra CA 90631 Phone: (562) 691-7006 Fax: (562) 691-5708 www.kugelkomponents.com 2017 PRICE SHEET #17 INDEPENDENT FRONT SUSPENSION SYSTEMS For All IFS Powder Coated (Black Only):

More information

OVERHAUL. Remove the union bolt and a gasket from the disc brake cylinder, then disconnect the flexible hose from the disc brake cylinder.

OVERHAUL. Remove the union bolt and a gasket from the disc brake cylinder, then disconnect the flexible hose from the disc brake cylinder. OVERHAUL COMPONENTS: See page 3232 Overhaul the RH side by the same procedures with LH side. Two types of brake pad exist; one is with slit and the other without slit. 1. REMOVE REAR WHEEL 2. DRAIN FLUID

More information

DISC BRAKE/DUAL MASTER CYLINDER CONVERSION. Tools, Equipment and Supplies Needed:

DISC BRAKE/DUAL MASTER CYLINDER CONVERSION. Tools, Equipment and Supplies Needed: Please take the time to read the enclosed instructions carefully. If you have any questions, call our Product Assistance personnel for clarification. It is important to note that these instructions contain

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC CONVERSION KIT A126-2 1988-98 C1500 2WD 10" REAR DRUM Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time to read

More information

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern

More information

Full Size GM Installation Instructions

Full Size GM Installation Instructions Full Size GM Installation Instructions Rear Disc Conversion 55 64 Full Size GM (Impala, Bel Air, etc.) This kit is for axle with a 3 3/8 spread center to center on the top two bolt holes (pictured left).

More information

Read all instructions carefully before attempting installation. REV DSL

Read all instructions carefully before attempting installation. REV DSL Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions And Warranty Information Part # 6830S ~ Small Block Chevrolet

More information

ETON America PARTS CATALOG

ETON America PARTS CATALOG ETON America PARTS CATALOG Matrix 50 Parts and drawing are subject to change without notice. ETON America reserves the right to substitute parts that have engineering changes that can alter the appearance

More information

Module 6: Air Foundation Brakes

Module 6: Air Foundation Brakes Air Brakes Terms and Definitions Basic Components That Make Up Air Foundation Brakes Types of Air Foundation Brakes Parts of a Cam Foundation Brake Parts of a Wedge Foundation Brake Parts of a Disc Foundation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC CONVERSION KIT A128 1990-1995 JEEP WRANGLER (YJ) WITH DANA 35 AXLES (non-abs) Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases

More information

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............

More information

Eliminator Vented Disc Brakes Owners Manual

Eliminator Vented Disc Brakes Owners Manual Eliminator Vented Disc Brakes Owners Manual TIE DOWN ENGINEERING 255 Villanova Drive SW, Atlanta, GA 30336 www.tiedown.com (404) 344-0000 Fax (404) 349-0401 Instruction Sheet #08075 101310,C752 Eliminator

More information

CADILLAC, CORVETTE, LINCOLN AND MOPAR

CADILLAC, CORVETTE, LINCOLN AND MOPAR COMPLETE BIG BRAKE KITS BRAKES CPP OFFERS PARTS FOR MANY OTHER APPLICATIONS... CADILLAC, CORVETTE, LINCOLN AND MOPAR Shown with powdercoated caliper upgrade BIG BRAKE PACKAGES INCLUDE UPGRADED ROTORS BIG

More information

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295

More information

S E R I E S APPL I CAT I ON GU IDE

S E R I E S APPL I CAT I ON GU IDE S E R I E S APPL I CAT I ON GU IDE Style. Power. Performance. 1 - Racing Dynamics light alloy monobloc road wheels offer hubcentric fitments for the discriminating BMW owner. Each wheel is cast of aluminum

More information

Brake System Operation

Brake System Operation Brake System Brake System Operation Donald Jones Brookhaven College Master cylinder Brake lines Hydraulic valves Disc brakes Drum brakes Power assist unit Parking brake Antilock system Brake System Functions

More information

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly

More information

Parts Catalog

Parts Catalog R Ingersoll Parts Catalog 8-3112 COMPACT TRACTORS WITH VANGUARD ENGINES 3012 - PIN 14145700 AND AFTER 3014 - PIN 14146700 AND AFTER 3016 - PIN 14147800 AND AFTER 3018 - ALL 4016 - PIN 14170800 AND AFTER

More information

SECTION 4A HYDRAULIC BRAKES

SECTION 4A HYDRAULIC BRAKES SECTION 4A HYDRAULIC BRAKES Caution: Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed electrical

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

Components & Accessories

Components & Accessories Flanges, Tuning Accessories & Baffles HOOKER FLANGES AND REPLACEMENT GASKETS 27250HKR Flange kit - Chrome flanges and C Clips for all EVO and Twin Cam Harleys skin packaged on a Hooker display card 27249HKR

More information

1969 Camaro. Concourse Style Disc Brake Conversion Kit Instllation Instructions

1969 Camaro. Concourse Style Disc Brake Conversion Kit Instllation Instructions Concourse Style Disc Brake Conversion Kit Instllation Instructions 1969 Camaro (1970 Chevelle Kit Shown) This document contains our regular disc brake conversion instructions with the addition of GM assembly

More information

Dropped Ball Joint Disc Brake Kits. WIDE 5 Bolt-On Ball Joint Disc Brake Kits. Standard Height Ball Joint Disc Brake Kits FRONT BRAKES & SUSPENSION

Dropped Ball Joint Disc Brake Kits. WIDE 5 Bolt-On Ball Joint Disc Brake Kits. Standard Height Ball Joint Disc Brake Kits FRONT BRAKES & SUSPENSION Dropped Ball Joint Disc Brake Kits Stopping is the other part of going! Now you can "bolt-on" a lower center of gravity, improved handling, and powerful fade resistant braking. Kit includes NEW Dropped

More information

-- Installation Instructions --

-- Installation Instructions -- 1 DOWNLOAD ENHANCED INSTALL MANUALS AT dieselperformance.com BD PERFORMANCE DODGE T4 5.9L CUMMINS EXHAUST MANIFOLD -- Installation Instructions -- Application List 1045987-T4 2003-2007 Dodge 24V -- PLEASE

More information

Super EZ Chain Saw UT Page 1 of 19 Carburetor

Super EZ Chain Saw UT Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A

More information

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine. Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC BRAKE CONVERSION KIT A125-3 1965-72 GM A-BODY 10 & 12 BOLT AXLES Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time

More information

INSTALLATION INSTRUCTION Rev A

INSTALLATION INSTRUCTION Rev A INSTALLATION INSTRUCTION 88587 Rev A FOR RANCHO SUSPENSION SYSTEM RS6587B: 2009 DODGE RAM 1500 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING:

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC BRAKE CONVERSION KITS A112, A112-1 & A112-93 1979-93 FORD MUSTANG with 7.5" & 8.8" AXLES Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs.

More information

A/F/X Body GM Installation Instructions

A/F/X Body GM Installation Instructions A/F/X Body GM Installation Instructions Power Disc Conversion 64-72 A Body / 67-69 F Body / 68-74 X Body 9 slimline booster pictured Your new disc brake conversion kit can be bolted up with standard hand

More information

INSTALLATION INSTRUCTION 88581

INSTALLATION INSTRUCTION 88581 INSTALLATION INSTRUCTION 88581 FOR RANCHO SUSPENSION SYSTEM RS6581B: DODGE RAM READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev C IMPORTANT NOTES! WARNING: This suspension

More information

Gear change & shift cables Gearchange balljoints and bushes. Globes 12 and 24 volt Grilles

Gear change & shift cables Gearchange balljoints and bushes. Globes 12 and 24 volt Grilles A Accessories Air Bags Air compressor assembly and components Air conditioner idler pulleys and condensers Air dryer assemblies and repair kits Air filter elements Air master assembly and repair kits Air

More information

CLICK for More Info Online

CLICK for More Info Online CLICK for More Info Online Floater Axle System and Radial-Mount Caliper with Drum-Style Parking Brake System Today s top pro-touring, autocross and road race vehicles often feature some of the largest

More information

Part list for Kawasaki H2, 1972

Part list for Kawasaki H2, 1972 Part list for Kawasaki H2, 972 . Cylinder head, cylinder. . Cylinder head, cylinder. 9205-049 NUT 0 m/m 2 2 40B400 WASHER-plain 4 m/m 2 3 46E400 WASHER-spring 4 m/m 2 4 92070-036 SPARK PLUG NGK B9 HS 3

More information

1. General Description

1. General Description General Description 1. General Description A: SPECIFICATION Front disc brake Rear disc brake Master cylinder Brake booster Brake line Model Other models WRX MT WRX AT STi Size 15 inch type 16 inch type

More information

Rear Disc Brake Kit. CLICK for More Info Online. Vented Disc with Parking Brake and Forged- Aluminum Four-Piston Calipers

Rear Disc Brake Kit. CLICK for More Info Online. Vented Disc with Parking Brake and Forged- Aluminum Four-Piston Calipers CLICK for More Info Online Vented Disc with Parking Brake and Forged- Aluminum Four-Piston Calipers 12.19 Rotor with Forged Dynalite Caliper Billet Aluminum Parking Brake and Caliper Mounting Bracket Assembly

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC CONVERSION KIT A136-1 1976-86 AMC 20 AXLES WITH WARN FULL FLOATING AXLE CONVERSION Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs.

More information

A /F/X Body Instruction Packet Rear Disc Conversion

A /F/X Body Instruction Packet Rear Disc Conversion A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). If your

More information

REMOVAL & INSTALLATION

REMOVAL & INSTALLATION REMOVAL & INSTALLATION FRONT DISC BRAKE PADS 1. Raise and support front of vehicle. Remove wheels. Remove caliper bolt and brakeline bracket bolts. Pivot caliper aside. Remove pads and pad shim. Remove

More information

Hands On Test Scoring Instructions

Hands On Test Scoring Instructions Hands On Test Scoring Instructions Each scoring box contains 3 to 6 line items and up to 7 numbers plus a 0. Each section has a separate criteria for scoring. Based on the criteria, you will score the

More information

DOOSAN COMMON PARTS MODEL: G20/25/30/32E-3 SERIAL: KN (LP), KP (DUEL FUEL) GAS/LP, MITSUBISHI (G424E / 4G64), 2.7 LITRE, 4 CYL

DOOSAN COMMON PARTS MODEL: G20/25/30/32E-3 SERIAL: KN (LP), KP (DUEL FUEL) GAS/LP, MITSUBISHI (G424E / 4G64), 2.7 LITRE, 4 CYL DOOSAN COMMON PARTS MODEL: G20/25/30/32E-3 SERIAL: KN (LP), KP (DUEL FUEL) GAS/LP, MITSUBISHI (G424E / 4G64), 2.7 LITRE, 4 CYL SERIAL NUMBER INFO PREFIX MODEL ENGINE FUEL/TRANS BRAKE KN G20/25/30/32E-3

More information

BRAKES - 1 A.H. SPARES LTD - RETAIL PRICE LIST BRK101 & BRK102. Price ex VAT. No. Part No. Description Application Notes

BRAKES - 1 A.H. SPARES LTD - RETAIL PRICE LIST BRK101 & BRK102. Price ex VAT. No. Part No. Description Application Notes BRAKES - 1 1 BRK101 RESERVOIR-single supply BN1-BN2 37.50 1 BRK102 RESERVOIR-dual supply BN6-BJ8 46.95 2 BRK103 CAP-reservoir BN1-BJ8 3.35 3 BRK104 WASHER-reservoir cap BN1-BJ8 0.70 BRK101 & BRK102 Manufactured

More information

Power Steering Pumps Replacement Style Power Steering Pump

Power Steering Pumps Replacement Style Power Steering Pump I Steering, Suspension, Rear End & Brakes Power Steering Pumps Replacement Style Power Steering Pump If you need to replace the worn out, damaged or missing power steering pump in your 1963-96 Chevrolet

More information

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRAME COVER 6-2 REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-10 HANDLEBARS 6-17 FRONT FORK 6-19

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRAME COVER 6-2 REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-10 HANDLEBARS 6-17 FRONT FORK 6-19 CHASSIS CONTENTS EXTERIOR PARTS 6- FRAME COVER 6- REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-0 HANDLEBARS 6-7 FRONT FORK 6-9 STEERING 6-6 REAR WHEEL 6-3 REAR BRAKE 6-39 6 REAR SHOCK ABSORBER 6-43

More information

DODGE CHARGER, CHALLENGER, MAGNUM (05-08), CHRYSLER L HEMI (FOR OFF-ROAD RACING USE ONLY)

DODGE CHARGER, CHALLENGER, MAGNUM (05-08), CHRYSLER L HEMI (FOR OFF-ROAD RACING USE ONLY) LEGALITY NOTES These exhaust headers DO NOT comply with California Air Resource Board regulations and are NOT LEGAL for sale or use on pollution controlled vehicles in the state of California. These headers

More information

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks

CYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks A1 A2 A3 A4 CYLINDER HEAD 1 3TB-11101-02-00 CYLINDER HEAD ASSY...... 1 2 4H7-11133-10-00. GUIDE, INTAKE VALVE..... 4 3 93440-12052-00. CIRCLIP................. 4 4 90116-06475-00. BOLT, STUD.............

More information

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left). SUM-BK1624A Full Size GM Installation Instructions Rear Disc Conversion 55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured

More information

55-64 Full Size Chevy Installation Instructions Standard Disc Conversion

55-64 Full Size Chevy Installation Instructions Standard Disc Conversion 55-64 Full Size Chevy Installation Instructions Standard Disc Conversion DBMC09, PV71 & PVB71 Pictured (Booster, master cylinder & valve setups may vary by upgrades selected) Your new disc brake conversion

More information

A /F/X Body Instruction Packet Rear Disc Conversion

A /F/X Body Instruction Packet Rear Disc Conversion A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). Rotor

More information

INSTALLATION INSTRUCTIONS: HARLEY-DAVIDSON STREET 500/750 SLIP-ON PART# 47937

INSTALLATION INSTRUCTIONS: HARLEY-DAVIDSON STREET 500/750 SLIP-ON PART# 47937 INSTALLATION INSTRUCTIONS: HARLEY-DAVIDSON STREET 500/750 SLIP-ON PART# 47937 Congratulations, you have purchased the finest exhaust system available for your motorcycle. Your Vance & Hines exhaust is

More information

Full Size GM Installation Instructions Rear Disc Conversion

Full Size GM Installation Instructions Rear Disc Conversion Full Size GM Installation Instructions Rear Disc Conversion 65 68 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).

More information

QUALITY HEATING AND COOLING PARTS. Premium-quality parts that meet or exceed OE specifications.

QUALITY HEATING AND COOLING PARTS. Premium-quality parts that meet or exceed OE specifications. QUALITY HEATING AND COOLING PARTS Premium-quality parts that meet or exceed OE specifications. CARQUEST RADIATORS Carquest premium-quality radiators meet or exceed OE specifications and undergo stringent

More information

FRONT GENERAL A X L E

FRONT GENERAL A X L E GENERAL General diagram of braking circuits 30 FRONT AXLE GENERAL Tightening torques (in dan.m) 30 FRONT AXLE GENERAL Tightening torques (in dan.m) 30 REAR AXLE GENERAL Tightening torques (in dan.m) 30

More information

SXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber

SXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

No. Description No. Descreption

No. Description No. Descreption 1 Handle Bar 14 Hex. Bolt with Flanged Face M6x25 2 Throttle Body 15 Hex. Bolt with Flanged Face M6x20 3 Plastic Piece for Throttle Cable 16 Adjusting Screw 4 Upper Throttle Body Housing 17 Tightening

More information

TAKE TIME TO READ THE INSTALLATION PROCEDURES BEFORE STARTING

TAKE TIME TO READ THE INSTALLATION PROCEDURES BEFORE STARTING INSTALLATION INSTRUCTIONS for TTi Small Block Header Part No.: TTI340BE17835 TAKE TIME TO READ THE INSTALLATION PROCEDURES BEFORE STARTING WARNING!!! We strongly suggest that you use an old set of headers

More information

Installation Instructions And Warranty Information

Installation Instructions And Warranty Information Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions And Warranty Information 1999-2006 Chevrolet/GMC 2WD 1500,

More information

99-04 GT. Hellion Power Systems Mustang GT Kit Instructions

99-04 GT. Hellion Power Systems Mustang GT Kit Instructions Hellion Power Systems 99-04 Mustang GT Kit Instructions Part 1 Hellion recommends that the front suspension system be installed either by trained professionals or by 5.Remove rack bolts K-Member Installation

More information

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

Transmission Brakes (Group 4)

Transmission Brakes (Group 4) Transmission Brakes (Group 4) Auto Transmission Oil Pan Gaskets 1961-1963 Dual path, 1 bolt. TPG613...$19.50 ea. 1964-1969 Super Turbo 300, 14 bolt. TPG649...$11.50 ea. 1964-1972 Turbo-Hydramatic 400,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS REAR DISC BRAKE CONVERSION KIT A117-1, A117-2 1991-97 S10 PICKUP & BLAZER 1985-02 ASTRO AND SAFARI VAN Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking

More information

LEXUS IS 250 Front Performance Brake Kit Section I - Installation Preparation

LEXUS IS 250 Front Performance Brake Kit Section I - Installation Preparation LEXUS IS 250 Front 2006- Performance Brake Kit Section I - Installation Preparation Part Number: PTR09-53080 Kit Contents Item # Quantity Reqd. Description 1 1 Brake Rotor, LH Front 2 1 Brake Rotor, RH

More information

X150 National Extreme 150cc Atv (VIN PREFIX RKKG)

X150 National Extreme 150cc Atv (VIN PREFIX RKKG) Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > ATV > X150 National Extreme 150cc Atv (VIN PREFIX RKKG) X150 National Extreme 150cc Atv (VIN PREFIX RKKG) Cylinder Head [Image]

More information