EXHAUST. Accessory Catalog and Specifications. Silex INNOVATIONS NGP032

Transcription

1 EXHUST ccessory atalog and Specifications Silex INNOVTIONS NGP032

2 PSSIONTE OLLORTIVE INNOVTIVE TRUSTED EMPOWERED ENERGIZED World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

3 ccessory Specifications Table of ontents Part ssembled ccessories Page - Table of ontents - orrugated Flex Specifications 3I-10 orrugated Flex onnectors - ellows/expansion Joint Specifications 3I-11 3I-13 3I-14 3I-15 3I-20-3I-20-N 3I-21 3I-22 3I-23 3I-24 3I-25 3I-25 3I-25 3I-26 3I-26-M Expansion Joint / ellows Wyes (ummins) Wyes (MTU) Wyes (aterpillar) Thimbles (ombustible Walls Only) Thimbles (Roof & Non-ombustible Walls) Roof Jacks Rain aps 90 Tube Elbows (Short Rad: Flanged One End) 90 Mitred Elbows (Short Rad: Flanged One End) Outlet Extensions (Tube: Flanged One End) Outlet Extensions (Tube: 45 w/ ird Screen) Outlet Extensions (Tube: Flanged oth Ends) 90 Tube Elbows (Short Rad: Flanged oth Ends) 90 Mitred Elbows (Short Rad: Flanged oth Ends) Part Stock ccessories Page 3I-27 3I-28 3I-31 3I-32 3I-33 3I-35 3I-36 3I-37 3I I-41 Pipe Hangers rackets lamps (ircle) lamps (Round olt) lamps (TruSeal) lamps (V-and) Flanges (Flared) Flanges (Machined Turbo) Flanges (Engine) Flanges (NSI) Part Stock ccessories Page 3I-45 3I-46 Flanges (Threaded Raised) Flanges (Reducing/Increasing: Pipe & Tube) - Gasket Specifications 3I-47 3I-48 3I-49 3I-50 3I-51 3I-52 3I-53 3I-54 3I-55 3I-55-M 3I-56 3I-57 3I-58 3I-59 3I-60 3I-61 3I-62 3I-63 3I-64 3I-65 3I-67 3I I-82 Nut olt Gasket Kits Gaskets Tube Fittings (uffed One End) Tube Fittings (uffed oth Ends) Tube Fittings (Reducer/Expanders) Tube Fittings (Tube onnectors/stack reakers) 90 Tube Elbows (Long Rad.: uffed One End) 90 Tube Elbows (Long Rad.: OD Tube Ends) 90 Tube Elbows (Short Rad.: Tangent ut) 90 Mitred Elbows 90 Tube Elbows (Short Rad.: uffed One End) 90 Tube Elbows (Short Rad.: OD Tube Ends) 45 Tube Elbows (Long Rad.: uffed One End) 45 Tube Elbows (Long Rad.: OD Tube oth Ends) 45 Tube Elbows (Short Rad.: uffed One End) 45 Tube Elbows (Short Rad.: OD Tube oth Ends) 45 Tube Elbows (Short Rad.: Tangent uts) Stainless Steel Flex Hose (Interlocking) Tubing Stainless Steel Flex Hose (orrugated) ones Rain Guards Drain ocks - Velcro Wrap Specifications 3I-103 3I-104 3I-105 3I-106 Velcro Wrap (Tubing) Velcro Wrap (Flex & ellows) Velcro Wrap (Elbows) Velcro Wrap (Flange) ccessory Part Number ssignments and more Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 1

4 10 Flex Specifications orrugated Flex - Technical Specifications Nominal Hose ID (in.) Nominal Hose OD (in.) Max Lateral Offset / Foot Max xial Movement / Foot Max Operating Temperature ( F) World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

5 10 Flex onnectors orrugated Flex onnectors Floating NSI Flange / NSI Flange Part Number WT 3I-10-1F I-10-1F I-10-1F I-10-1F I-10-1F I-10-1F I-10-1F Male NPT / NSI Flange Part Number WT 3I I I I I Threaded pipe nipples may be replaced with plain pipe stubs. Male NPT / Male NPT Part Number WT 3I I I I I Threaded pipe nipples may be replaced with plain pipe stubs. Female Half oupling / NSI Flange Part Number WT 3I I I I I ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Flex is 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 3

6 10 Flex onnectors orrugated Flex onnectors Slotted ID uff / NSI Flange Part Number WT 3I I I I I I I Slotted ID uff / Male NPT Part Number WT 3I I I I I Threaded pipe nipples may be replaced with plain pipe stubs. Slotted ID uff / Female Half oupling Part Number WT 3I I I I I ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Other sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Flex is 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. 4 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

7 10 Flex onnectors orrugated Flex onnectors Slotted ID uff / Slotted ID uff Part Number WT 3I I I I I I I I I Tube ends may be substituted. Floating NSI Flange / 90 Elbow / Floating NSI Flange Part Number WT 3I-10-1F61F I-10-1F61F I-10-1F61F I-10-1F61F Floating NSI Flange / 90 Elbow / Slotted ID uff Part Number WT 3I-10-1F I-10-1F I-10-1F D ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Flex is 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 5

8 10 Flex onnectors orrugated Flex onnectors Flared Flange / 90 Elbow / Floating NSI Flange Part Number WT 3I F I F Flared Flange / 90 Elbow / Slotted ID uff Part Number WT 3I I I I D Machined Turbo Flange / 90 Elbow / Floating NSI Flange Part Number WT 3I F I F oth 5" and 6" connectors are equipped with a 5" machined turbo flange. ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Flex is 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. 6 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

9 11 ellows Specifications ellows / Expansion Joint - Technical Specifications Nominal Size (in.) Specifications for Single Ply ellows (Expansion Joints) PSIG Temp ( F ) xial omp Lateral Offset xial Spring Rate lbs./in. Lateral Spring Rate lbs./in.** S L S L S L S L Fatigue* (ycle) 3" ,000 4" ,000 5" ,000 6" ,000 8" ,000 10" ,000 12" , ,000 14" , ,000 16" , ,000 18" , ,000 20" , ,000 22" , , ,000 24" , , ,000 Movements are oncurrent Numbers presented are for 8"-12" and 12"-24" size bellows capsules. *Numbers vary depending upon overall length. **ll ellows designs are per Expansion Joint Manufacturers ssociation 9th Edition. For specific requirements contact a Product Specialist. ll dimensions are in inches. onsult a Product Specialist if greater movement is needed. Larger diameters available upon request. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 7

10 11 ellows ellows / Expansion Joints Floating NSI Flange / NSI Flange Part Number 3I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F I-11-1F ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. ellows are 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. ellows flow liners are recommended for exhaust 6" and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter. ellows flow liners are recommended for exhaust 8" and above when gas/stream flow conditions are greater than or equal to 25 feet / second. 8 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

11 11 ellows ellows / Expansion Joints Male NPT / Male NPT Part Number 3I I I I Threaded pipe nipples may be replaced with plain pipe stubs. Female Half oupling / NSI Flange Part Number 3I I I I Slotted ID uff / NSI Flange Part Number 3I I I I uff may be replaced by plain tube. Slotted ID uff / Male NPT Part Number 3I I I I Threaded pipe nipples may be replaced with plain pipe stubs. ll dimensions are in inches. Larger sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. ellows are 321 stainless steel. End connections are carbon steel. onnections available in stainless steel. all Product Specialist for details. ellows flow liners are recommended for exhaust 6" and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter. ellows flow liners are recommended for exhaust 8" and above when gas/stream flow conditions are greater than or equal to 25 feet / second. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 9

12 11 ellows ellows / Expansion Joints Slotted ID uff / Female Half oupling Part Number 3I I D Slotted ID uff / Slotted ID uff Part Number 3I I I I I I I Tube ends may be substituted. Floating NSI Flange / 90 Elbow / Floating NSI Flange Part Number 3I-11-1F61F I-11-1F61F I-11-1F61F I-11-1F61F I-11-1F61F I-11-1F61F Floating NSI Flange / 90 Elbow / Slotted ID uff Part Number 3I-11-1F I-11-1F I-11-1F Tube ends may be substituted. 10 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

13 11 ellows ellows / Expansion Joints Flared Flange / 90 Elbow / Floating NSI Flange Part Number 3I F I F Flared Flange / 90 Elbow / Slotted ID uff Part Number 3I I I I D Machined Turbo Flange / 90 Elbow / Floating NSI Flange Part Number 3I F I F I-11-DD-861F oth 5" and 6" connectors are equipped with a 5" machined turbo flange. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 11

14 13 Wyes ummins Engine Wyes ummins QST 30 Part Number Gen Set Model Size WT 3I DQF X 6 X I DQF X 6 X I DQF X 6 X I DQFD X 6 X Floating ummins flanged inlets. Floating NSI flanged outlet. ummins QSK 50 Part Number Gen Set Model Size WT 3I DQK X 6 X I DQK X 6 X I DQK X 6 X I DQK X 8 X Floating ummins flanged inlets. Floating NSI flanged outlet. ummins QSK 60 Part Number Gen Set Model Size WT 3I DQK X 10 X I DQK X 10 X I DQK X 10 X I DQK X 10 X I DQK X 10 X I DQKH X 10 X I DQKH X 10 X Floating NSI flanged inlets and outlet, unless otherwise noted. ummins QSK 78 Part Number Gen Set Model Size WT 3I DQL 2700 & DQL X 12 X I DQL 2700 & DQL X 12 X I DQL 2700 & DQL X 12 X I DQL 2700 & DQL X 12 X Floating NSI flanged inlets. Floating NSI flanged outlet. PLESE ENSURE FIT ND FUNTION FOR WYE EFORE ORDERING. ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Wyes are carbon steel construction with 321 stainless steel corrugated flex hose. onnections available in stainless steel. all Product Specialist for details. 12 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

15 14 Wyes MTU Engine Wyes MTU 2000 Series DSE 12V-2000 & 16V-2000 Part Number kw Size WT 3I X 6 X I X 6 X I X 6 X I X 6 X Floating 6" MTU flanged inlets. Floating NSI flanged outlet. MTU 4000 Series 12V-4000 Part Number kw Size WT 3I , 1350, 1500, & X 10 X I , 1350, 1500, & X 10 X Floating 10" MTU flanged inlets. Floating NSI flanged outlet. MTU 4000 Series 16V-4000 Part Number kw Size WT 3I X 10 X I X 10 X Floating 10" MTU flanged inlets. Floating NSI flanged outlet. ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. 10" MTU flanged inlets and NSI flanged outlet, unless otherwise noted. ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Wyes are carbon steel construction with 321 stainless steel corrugated flex hose. onnections available in stainless steel. all Product Specialist for details. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 13

16 15 Wyes aterpillar Engine Wyes aterpillar " T Flanged Inlets Part Number kw Size WT 3I X 8 X Floating T flanged inlets and floating NSI flanged outlet, unless otherwise noted. aterpillar " T Flanged Inlets Part Number kw Size WT 3I X 8 X I X 8 X I X 8 X I X 8 X I X 8 X I X 10 X I X 10 X Floating T flanged inlets and floating NSI flanged outlet, unless otherwise noted. aterpillar " T Flanged Inlets Part Number kw Size WT 3I X 10 X I X 10 X I X 10 X I X 10 X I X 10 X I X 10 X Floating T flanged inlets and floating NSI flanged outlet, unless otherwise noted. aterpillar 3516 Quad Turbo 8" T Flanged Inlets Part Number kw Size WT 3I X 10 X I X 10 X I X 10 X I X 10 X Floating T flanged inlets and floating NSI flanged outlet, unless otherwise noted. ll dimensions are in inches. ll weights are in pounds. 14 ll NSI flanges may be replaced with a standard aterpillar, ummins, or MTU engine flanges. Wyes are carbon steel construction with 321 stainless steel corrugated flex hose. onnections available in stainless steel. all Product Specialist for details. World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

17 20 Thimbles Wall and Roof Thimbles Type ombustible Walls Part Number WT 3I I I I I I I I I I I I I I I I I I I I I Type N Part Number Silex INNOVTIONS Roof & Non-ombustible Walls WT 3I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N I-20-N Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com Nominal Pipe Size Exhaust Tube/Pipe (Not Included) 26.00" Std. GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com lamp (Included) Rain Guard (Included) Pest ontrol Screen (4) Support Gussets Outer Square Flashing (Welded to Thimble) 8.00" Std. (Roof) Inner Square Flashing (Shipped Loose) Ventilating Holes (On Top & ottom) OD Measurement of Standard Schedule Pipe OD (Thimble "" Dim) "" Dimension measures the outside diameter of the exhaust tube or pipe. See chart above for outside diameter of standard pipe. ll dimensions are in inches. ll weights are in pounds. Weights are approximate. arbon steel construction. vailable in stainless steel. all Product Specialist for details. When calculating height thimble must have a 9" clearance on each side of the wall or roof. To prevent warping, outer flashing is not welded 100%. e sure to include correct roof pitch on all roof applications. There is an additional charge for non-flat roof applications. onforms to NFP 37 and 110. The above thimbles have been sized for standard (8") thick walls and roofs. 3I-20-N Thermal barrier used within the thimbles is composed of high density, type "E" fibers, fibrous glass heavy-duty insulation. pply high-temp 3I-20-N Mil Series Silicon RTV where needed. 3I-20-N Pest ontrol Screen adds 2"-3" to exterior height. onsult Product Specialist for specifics. ll arbon Steel Thimbles will come with High Heat lack Paint non-standard. 3I-20-N For further information on quotes, please contact a Product Specialist EXHUST 15

18 21 Roof Jacks Roof Jacks Rainguards uffed Part Number 3I I I LMP (INLUDED) 3I I RINGURD (INLUDED) 3I I I I I STD EXHUST TUE/PIPE (Not Included) OUTER ROUND FLSHING (WELDED) 3I I ENGINE ENLOSURE ROOF lamp included. Roof jacks are designed for non-combustible gauge metal enclosures only. INNER ROUND FLSHING (LOOSE) Rainguards Flanged Part Number 3I-21-F I-21-F I-21-F I-21-F RINGURD (INLUDED) 3I-21-F I-21-F I-21-F I-21-F I-21-F I-21-F I-21-F I-21-F STD EXHUST TUE/PIPE WITH NSI FLNGE (Not Included) Outer Round Flashing (Welded) ENGINE ENLOSURE ROOF Roof jacks are designed for non-combustible gauge metal enclosures only. INNER ROUND FLSHING (LOOSE) UTION: Roof jacks are designed for non-combustible metal enclosures only. void potential fire hazard. Product should never be exposed to combustible material. DO NOT USE if combustible materials are present. Refer to Wall and Roof Thimbles (page 15) for applications where combustible materials will come in contact with the product. ll dimensions are in inches. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. 16 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

19 22 Rain aps Standard Part Number ID (ollar) 3I I I I I I I I I I I I I Recommended for both horizontal and vertical installation. arbon Steel Zinc Plated Heavy Duty arbon Steel Part Number ID (ollar) Weight 3I HD 7 5 3I HD 8 5 3I HD I HD 9 6 3I HD I HD I HD I HD I HD I HD I HD I HD I HD I HD I HD I HD I HD Recommended for vertical installation only. High Heat lack Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 17

20 22 Rain aps Standard Part Number ID (ollar) 3I S I S I S I S I S I S I S I S I S I S I S I S Recommended for vertical installation only. 304 Stainless Steel Heavy Duty 304 Stainless Steel Part Number ID (ollar) Weight 3I S I S I S I S I S I S I S I S I S I S I S I S Recommended for vertical installation only. 18 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

21 23-24 Elbows 90 Elbows: Flanged One End 90 Tube Elbow (Short Radius) Flanged One End Part Number WT 3I I I I I I Mitred Elbow (Short Radius) Flanged One End Part Number WT 3I I I I I I I I I I I I vailable in stainless steel. all Product Specialist for details. onnection(s) are NSI steel plate flanges unless otherwise specified. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 19

22 25 Outlet Extensions ssembled Tubing Straight Tube (Stacks) Flanged One End Part Number (OD) 3I I I I I I I I I I I I I I I I Straight Tube Part Number (OD) 3I I I I I I I I I I I I I I I I ut with ird Screen ll dimensions are in inches. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. onnection(s) are NSI steel plate flanges unless otherwise specified. See price sheet for optional lengths. 20 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

23 25-26 Outlet Extensions ssembled Tubing & 90 Elbows Straight Tube Flanged oth Ends Part Number Std. Length (OD) WT 3I I I I I I I I I I I I I I I I Elbow (Short Radius) Flanged oth Ends Part Number Tube / Mitred WT 3I Tube I Tube I Tube I Tube I Tube I Tube I-26-M-800 Mitred I-26-M-1000 Mitred I-26-M-1200 Mitred I-26-M-1400 Mitred I-26-M-1600 Mitred I-26-M-1800 Mitred I-26-M-2000 Mitred I-26-M-2200 Mitred I-26-M-2400 Mitred I-26-M-2600 Mitred I-26-M-2800 Mitred I-26-M-3000 Mitred ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. onnection(s) are NSI steel plate flanges unless otherwise specified. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com Tube Elbow Mitred Elbow EXHUST 21

24 27 Pipe Hangers levis & Pear Shaped Pipe Hangers Pipe Hangers levis Part Number Pipe Size D olt Size WT 3I I I ,350 3I ,350 3I ,430 3I ,430 3I ,940 3I ,000 D 3I ,600 3I ,800 3I ,200 3I ,600 3I ,800 3I ,800 3I ,800 3I ,800 Heavy plate steel construction. Pipe Hangers Pear Shaped Part Number Pipe Size D WT 3I I I I I I ,000 3I ,000 D 3I ,000 djustable 22 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

25 28 rackets Round Mounting rackets Single Piece onstruction** arbon Steel Part Number (ID) F G T WT 3I I I I I I I I I I I I I I G T F Two-Piece Split Design** arbon Steel Part Number (ID) F G T WT 3I I I I I I I I I I I I G T F ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. **28 Series rackets are not to be used for vertical installations. For vertical applications, we recommend the installation of 29 Series rackets (found in the Silencer atalog). We do not recommend using 28 Series rackets to hang a pipe or silencer. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 23

26 31-35 lamps Full ircle arbon Steel Part Number Size Part Number Size Part Number Size 3I I I I I I I I I I I I I I I I Round olt arbon Steel Part Number Size olt Size Part Number Size olt Size 3I I I I I I I I I I I I TruSeal Style Stainless Steel Part Number Size Part Number Size 3I I I I I I I I I I I I STYLE 1 STYLE 2 Size 2 thru 6 Size 8 thru 12 Stainless V-and Manifold Part Number Tube Size pex Diameter H pplication 3I-35-JD John Deere 3I-35-JD John Deere 3I ummins L10 3I Detroit 6-71, 12V71 3I iresearch TEO699 3I IR T7899, TH0864 3I ummins VT50 3I T Turbo 3I Detroit Diesel 3I V-2000 (1000kW) PEX H 40 o NOM. DI. 24 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

27 36-40 Flanges Flared, Machined Turbo, and Engine Flanges Flared Part Number Inner Dia Outer Dia Length V-and lamp 3I-36-JD JD-250 3I all Product Specialist L 3I all Product Specialist 3I-36-JD JD-400 3I ID OD 3I Machined Turbo (From 1018 Heavy Wall Tubing) Part Number Nom. Size lamp pplication 3I See Footnote 3I D 16V2000 Standard Engine (aterpillar, MTU, ummins) Part Number Engine Type (ID) (OD) () D (Dia) Holes E (Thk) WT 3I T I T I T I T E 3I T I T I T I T E Type 1 D 3I MTU I MTU I MTU I UM Type 2 D used on the following engines: iresearch TV801,T1885, T1840,ll Schwitzer, DD Turbo, and ummins K. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 25

28 41 Flanges NSI Pattern Flanges NSI Pattern Steel Plate (arbon Steel) Part Number Pipe/Tube (D) (OD) () D (DI) Holes E (THK) WT 3I-41-T-200 Tube I-41-P-200 Pipe I-41-T-250 Tube I-41-P-250 Pipe I-41-T-300 Tube I-41-P-300 Pipe I-41-T-350 Tube I-41-P-350 Pipe I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube I Tube D ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. 26 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

29 45-46 Flanges NSI Threaded Raised Part Number Thread Size Diameter 3I I I I I I I I I NPT Standard Pipe Threads... NSI Reducing / Increasing Part Number (Pipe) Part Number (Tube) Reducing Size IPS Size Diameter WT 3I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x I-46-P T x Flanges (.50") thick carbon steel plate... Std Pipe or Tube Tube ID ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 27

30 47-48 Gasket Specifications Gaskets - Technical Specifications Fiber Full Face Gaskets Temperature Rating: 1800 F Physical Test Properties Specification Range Nominal Test Values Test Method 34.5 MPa (5000psi) 25-40% 35% STM F MPa (5000 psi) 30% Min 34% STM F-806 Ignition Loss ( F) 30% Max 27% STM F-495 ir ging (1000 F) Thickness Loss 0-10% 6% STM D-573 ir ging (1000 F) Weight Loss 20% Max 11% Fluid Resistance STM IRM903 Oil - Thickness hange Fluid Immersions ( F) 12-20% 12% STM F-146 Fluid Resistance STM IRM903 Oil - Weight hange 70% Max. 58% STM F-146 Fluid Resistance STM Fuel - Thickness hange 10-20% 15% STM F-146 Fluid Resistance STM Fuel - Weight hange 50% Max. 45% STM F-146 GTE/SILEX full face gaskets use a 0.008" ETP (electrolytic tin plate) low carbon steel core. The core is then laminated on two sides with a facing composed of heat resistant vermiculite and ceramic fibers chemically bonded with an NR binder. This gasket is designed for hot gas applications where extreme heat is present. The fiber facings are mechanically bonded without the use of any adhesives, providing stability and integrity even when exposed to high heat, scrubbing, and vibration. Gasket is asbestos-free. Its color is light brown. 28 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

31 47 NG Kits Fiber Full Face Engine Gasket Part Number Engine Size olt Diameter olt Length olts/nuts per Set 3I-47-T-400-FF T I-47-T-500-FF T I-47-T-600-FF T I-47-T-800-FF T I-47-T-1000-FF T I-47-T-1200-FF T I-47-T-1400-FF T I-47-UM-600-FF UM I-47-MTU-600-FF MTU I-47-MTU-1000-FF MTU Gasket per Set Grade 2 Zinc plated nuts/bolts. vailable in 304 and 316 stainless steel consult Product Specialist for details. Fiber gasket rated up to 1,800 F for continuous use, 2,300 F maximum temperature. Fiber Full Face NSI Gasket 6" T flange shown Part Number Size olt Diameter olt Length olts/nuts per Set Gasket per Set 3I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF I-47-FF Grade 2 Zinc plated nuts/bolts. vailable in 304 and 316 stainless steel consult Product Specialist for details. Fiber gasket rated up to 1,800 F for continuous use, 2,300 F maximum temperature. Sizes 26" and up gaskets will come in two pieces. Silex INNOVTIONS ll dimensions are in inches. Larger sizes available. all Product Specialist for details. vailable in stainless steel. all Product Specialist for details. Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 29

32 48 Gaskets Fiber Full Face Engine Gasket Part Number Engine Size ID OD THK 3I-48-T-400-FF T I-48-T-500-FF T I-48-T-600-FF T I-48-T-800-FF T I-48-T-1000-FF T I-48-T-1200-FF T I-48-T-1400-FF T I-48-UM-600-FF UM I-48-MTU-600-FF MTU I-48-MTU-1000-FF MTU Fiber gasket rated up to 1,800 F for continuous use, 2,300 F maximum temperature. 6" T flange shown Fiber Full Face NSI Gasket Part Number Size ID OD THK 3I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF I-48-FF Fiber gasket rated up to 1,800 F for continuous use, 2,300 F maximum temperature. ll dimensions are in inches. Larger sizes available. all Product Specialist for details. 30 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products

33 49-51 Tube Fittings uffed One End (Flex Hose ouplers / Stacks) Part Number Tube Size L WT Part Number Tube Size L WT 3I I I I I I I I I I OD L ID uffed oth Ends (Straight Tube ouplers) Part Number Tube Size L WT Part Number Tube Size L WT 3I I I I I I I I I I I L ID Reducer / Expander Style 1 Part Number Tube Size L WT Part Number Tube Size L WT 3I X I X I X I X I X I X I X I X I X I X I X I X L OD 1 OD 2 Reducer / Expander Style 2 Part Number Tube Size L WT Part Number Tube Size L WT 3I X I X I X I X I X I X I X I X I X I X I X I X OD L ID vailable in stainless steel. all Product Specialist for details. Silex INNOVTIONS Silex: Sales/Quote Silex.Sales@nelsongp.com Order Silex.Orders@nelsongp.com silex.com For further information on quotes, please contact a Product Specialist GT Phone: Sales/Quote GTExhaust.Sales@nelsongp.com Order GTExhaust.Orders@nelsongp.com gtexhaust.com EXHUST 31

34 51-52 Tube Fittings Reducer / Expander Style 3 Part Number Tube Size L WT Part Number Tube Size L WT 3I X I X I X I X I X I X I X I X I X I X I X I X OD L ID Reducer / Expander Style 4 Part Number Tube Size L WT Part Number Tube Size L WT 3I X I X I X I X I X I X I X I X I X I X I X I X ID L ID 1 2 Stack reaker (Includes 2 Flanges and lamp) Flange Number WT lamp Number WT Set Number (Flanges & lamps) WT ID 3I I-52E I I-52E I I-52E I I-52E I I-52E I I-52E I I-52E Stack breakers are leak tight. No gaskets are required ID V-lamp With Hinge Open Ear Style Part Number Tube Size pex WT Part Number Tube Size pex WT 3I I I I I I I I I ll dimensions are in inches. ll weights are in pounds. Weights are approximate. Larger sizes available. all Product Specialist for details. vailable in 304 stainless steel. all Product Specialist for details. PEX 32 World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI United states NELSON Tel: GLOL PRODUTS nelsonglobalproducts.com GT Exhaust and Silex are divisions of Nelson Global Products