Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Size: px
Start display at page:

Download "Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees"

Transcription

1 Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings M-7 Installation-Ready Rigid oupling K-9 & Z05 Rigid oupling Z07 Heavy Duty Rigid oupling XH-1000 Extra Heavy Rigid oupling Flexible oupling Heavy Duty Flexible oupling N Flexible oupling, L Large Diameter oupling Reducing oupling... G-8 Hinged Lever oupling Outlet oupling T & 7771-T Transition ouplings... 5 XH-70EP Extra Heavy Rigid oupling w/ep Gasket... 6 Flange dapters Flange dapter, NSI lass 15/ Flange dapters, PN10/16 & S 10 Table E Flange dapter, NSI lass Sandwich Plate & 7181 Universal Flange dapters Solid Flange dapters, NSI lass 15/ Mechanical Tees M1 & 771 Mechanical Tee, Female Threaded Outlet M & 77 Mechanical Tee, Grooved-end Outlet Saddle-Let (Small Mechanical Tee) Performance Data Sheet onnect with the est! atalog 011

2 Shurjoint Grooved Mechanical ouplings atalog 011 The Shurjoint grooved piping system is one of the most advanced, versatile, economical and reliable systems available today. fter the pipe ends are grooved a gasket is mounted over the pipe ends. The coupling segments are then placed over the gasket and the bolts and nuts are fastened resulting in a secure and leak free joint. coupling can be installed 3 4 times faster than a comparable welded or brazed joint and there is no need for a flame or welding torch on the job site. grooved mechanical coupling can be installed by fastening a pair of bolts and nuts while using only a wrench or spanner, whereas a comparable flanged joint requires the fastening of many bolts and nuts with a pair of wrenches. The grooved system allows for easy material take-offs and unlike a threaded system, there is no need to allow for added pipe length for thread engagement. With removal of just a few bolts one can easily access the system for cleaning, maintenance, changes and or system expansion. Helpful Information to Ensure Proper ssembly Some couplings and components require the housing bolt pads to make metal-to-metal contact for proper assembly, while others require a specific bolt torque while maintaining equal bolt pad gaps. The icons and information below will help to identify those items to ensure proper assembly. Read and follow all installation instructions for the component being installed. Metal-to-metal contact: Tighten bolts and nuts until bolt pads make metal-to-metal contact. fter metal-to-metal contact is achieved, tighten nuts by another one quarter or one half turn to make sure the bolts and nuts are snug and secure. No torque wrench is required. Excessive torque may lead to bolt or joint failure. No Gap Metal-to-metal contact fter metal-to-metal, further tighten one quarter or half turn Torque required! olts and nuts must always be tightened to the required torque by using a torque wrench. Normally there will be some gaps seen between the bolt pads after the bolts and nuts are fully tightened. Models that require torque tightening include through 4 of model XH-1000, all sizes of models XH-70EP, SS-7X and 79 couplings. lways use a torque wrench Installation-Ready oupling The development of the Shurjoint installation-ready coupling has continued the advancement of grooved systems, making it possible to further speed installation and performance. The factory supplied couplings are installation ready with no loose parts and no disassembly required. #SS-7X 10 ~ 4 #79 ~ 0 Installation-Ready oupling 1 onnect with the est! opyright 011 Shurjoint

3 Rigid & Flexible ouplings Grooved mechanical couplings (GM) are available in both rigid and flexible models. rigid coupling is used in applications where a rigid joint is desired, similar to that of a traditional flanged, welded, and or threaded connection. To be considered rigid, a coupling would allow less than one degree of deflection or angular movement. Flexible couplings are designed to accommodate axial displacement, rotation and a minimum one degree of angular movement. Flexible couplings are used in applications that call for curved or deflected layouts and or when systems are exposed to outside forces beyond normal static conditions, such as seismic events or where vibration and or noise attenuation are a concern. oupling Housing Segment olt / Nut Groove oupling Key #7705 Flexible oupling Gasket Grooved couplings become less flexible as the pipe size increases. For sizes in excess of 18 (450 mm) couplings are very limited in their angular movement. Please refer to the following definition and test methods. Definition Grooved couplings are subjected to internal pressures and exterior bending forces during service. STM F defines a rigid coupling as a joint where there is essentially no available free angular or axial pipe movement and a flexible coupling as a joint wherein there is available limited angular and axial pipe movement. ending Moment Test bending moments are calculated by the equation M = F (L), where F is weight of water filled pipe (Lbs) and L is hanger spacing x 1/ (feet). The table below shows test bending moments calculated using sch. 40 pipe with NFP 13 hanger spacing. Water filled pipe L Hanger Spacing Test ending Moment (STM F1476) Nom. Size Moment Moment (inches) N-m Lb-Ft 1½ ½ Flexibility Proof Test Flexibility proof testing is conducted by applying a small bending moment, 10% of the listed moment, to the test assembly with no internal pressure. 4 model 7705 or 7707 flexible coupling deflects 3 4 degrees depending on the type of groove processed. F M = F(L) M = 10% listed moment L Rigid oupling - Max. Deflection atalog 011 Rigidity Proof Test Rigidity proof testing is conducted by applying 5% of the listed moment to the test assembly which is internally pressurized to the rated pressure. Pressurized to rated pressure M= 5% listed moment The rigid coupling shall pass the test when the angle has not changed more than angle θ. θ shall be calculated as follows: θ = 60 (minutes) [ (minutes) x (nominal pipe size in inches)]. In other words, when θ is less than 1 degree (60 minutes), the grooved mechanical coupling is verified as a rigid coupling and when θ is more than 1 degree (60 minutes), the GM is regarded as a flexible coupling. The maximum angles θ for rigid couplings are shown in the table below: Nom. Size θ, max θ, max. (inches) (minutes) (degrees) 1½ ½ ending Moment Proof Test The coupling shall resist a 100% listed bending moment while the assembly is internally pressurized to the rated pressure. M = 100% listed moment No internal pressure Pressurized to rated pressure onnect with the est! 13 opyright 011 Shurjoint

4 M-7 INSTLLTION REDY RIGID OUPLING Patented and Patents Pending atalog 011 The Shurjoint Model M-7 is designed for general service applications. The advanced design and features make this coupling the right choice to speed installation and performance. The M-7 is supplied installation ready with no loose parts and no disassembly required. The advanced housing and Fast-Fit gasket designs result in superior compression and sealing dynamics while reducing the possibility of gasket pinching. Hanging requirements correspond to NFP 13, SME 31.1 and Working Pressure (STD, Roll-grooved) Max. Service Temperature F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 Housing Segment ompression Pad *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Features Installation ready Enhanced joint rigidity Reduced chance of gasket pinching Superior compression & sealing capability Nominal Pipe Max. Working Max End xial Dimension olt Size O.D. Pressure Load Displacement Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in Kgs / Lbs M10 x ⅜ x ⅛ M10 x ½ ⅜ x ⅛ M10 x ⅜ x ¾ M10 x ⅜ x ¾ M1 x ½ x M1 x ½ x Step 1 Step Step 3 The Model M-7 is supplied factory assembled. Do not disassemble the coupling prior to installation. Gaskets and housing parts are not interchangeable with other style couplings. Place the coupling over one pipe end. The center gasket leg serves as your indication to stop. Insert the second pipe end or component into the coupling, butting it up to the center leg of the gasket. Tighten bolts and nuts until the housing segments and compression pads make metal-to-metal contact*. * Read and familiarize yourself with the complete Shurjoint installation instruction prior to installing, disassembling or adjusting any component. 14 onnect with the est! opyright 011 Shurjoint

5 Z05 RIGID OUPLING ngle-pad Design atalog 011 The Shurjoint Model Z05 is an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called snaking of a long straight run. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. With the removal of only one bolt you can make a fast and easy swing-over installation. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt. Nominal Pipe Max. Working Max. End xial Dimensions olts Size Size O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs ~ M10 x ¼ ~ ⅜ x ⅛ ~ M10 x ½ ~ ⅜ x ⅛ ~ M10 x ~ ⅜ x ¾ ~ M10 x ½ ~ ⅜ x ¾ ~ M10 x mm ~ ⅜ x ¾ ~ M10 x ~ ⅜ x ¾ ~ M10 x ~ ⅜ x ¾ ~ M10 x mm ~ ⅜ x ¾ ~ M1 x mm ~ ½ x ~ M1 x mm ~ ½ x ~ M1 x ~ ½ x ~ M1 x mm ~ ½ x ~ M1 x mm ~ ½ x ~ M1 x ~ ½ x ~ M16 x ~ ⅝ x 5 5 / ~ M0 x JIS ~ ¾ x 4¾ onnect with the est! 15 opyright 011 Shurjoint

6 K-9 G-01 MODEL K-9 RIGID OUPLING - T&G Design - The Shurjoint Model K-9 is a T&G (tongue & groove) design coupling for moderate pressure applications where rigidity is required including valve connections, mechanical rooms, fire mains and long straight runs. The built-in teeth and T&G mechanism firmly graps the pipe ends to eliminate undesired flex. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. The Model K-9 is recommended for services up to 0 bar (300 psi) depending on the size and wall thickness of the pipe being used. ll K-9 couplings are comprised of two identical housing segments, EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. K-9 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Nom. Rating lass 150 Working Pressure (STD, Roll-Grooved) 300 F 0 Max. Service Temperature EPDM: 30 F / 110 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. MTERIL SPEIFITIONS Housing: Ductile Iron to STM 536, Gr , min. tensile strength 448MPa (65,000 psi). Surface Finish: Standard painted finishes in orange or RL3000 red. Hot dip zinc galvanized (Option). Epoxy oatings in RL3000 red or other colors (Option) Rubber Gasket: Grade E EPDM (olor code: Green stripe) Good for cold & hot water up to +30 o F (+110 o ). lso good for services for water with acid, water with chlorine, deionized water, seawater and waste water, dilute acids, oil-free air and many chemicals. Not recommended for petroleum oils, minerals oils, solvents and aromatic hydrocarbons. Maximum Temperature Range: -30 o F (-34 o ) to +30 o F (+110 o ). (Option) Grade T Nitrile (olor code: Orange stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. lso good for water services under +66 o (+150 o F). Temperature range: -9 o to +8 o (-0 o F to +180 o F). Do not use for HOT WTER above +66 o (+150 o F) or HOT DRY IR above +60 o (+140 o F) Other options: Grade O - Fluoroelastomer. Grade L - Silicone. For additional details contact Shurjoint. olts & Nuts: Heat treated carbon manganese steel track bolts to STM a (or 183 Gr. ), minimum tensile strength 758 MPa (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to STM 563. Job Name: System No. Location: ontractor: pproved: Date: Engineer: pproved: Date: Shurjoint product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Shurjoint Technical Service. Shurjoint reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligations to make such changes and modifications on Shurjoint products previously subsequently sold. G-01-1/4Rev. F a

7 K-9 G-01 MODEL K-9 RIGID OUPLING Nominal Size Pipe OD Max. Working Pressure Model K-9 Rigid oupling Max End Load xial Displacement Dimension mm mm ar kn mm mm mm mm mm Kgs in in PSI Lbs in in in in in Lbs ~ M10 x ~ /8 x 1-3/ ~ M10 x ~ /8 x -1/ ~ M10 x ~ /8 x -1/ ~ M10 x ~ /8 x -1/ ~ M10 x ~ /8 x -1/ ~ M10 x ~ /8 x -3/ ~ M10 x ~ /8 x -3/ ~ M10 x ~ /8 x -3/ ~ M1 x ~ / x ~ M1 x ~ / x ~ M1 x ~ / x ~ M1 x ~ / x ~ M1 x ~ / x ~ M1 x ~ / x ~ M16 x ~ /8 x 3-1/ 9.7 MODEL K-9H RIGID OUPLING Model K-9H Rigid oupling Nominal Size Pipe OD Max. Working Pressure Max End Load Pipe End Separation Dimension mm mm ar kn mm mm mm mm mm Kgs in in PSI Lbs in in in in in Lbs ~ M0 x ~ /4 x 4-3/4 9.7 olt Size olt Size Weight Weight G-03-/4 Rev.. E b

8 K-9 G-01 LISTINGS / PPROVLS The information provided below is based on the latest listing and approval data at the time of publication. Listings/pprovals are subject to change and/or additions by the approvals agencies. ontact Shurjoint for the performance on other pipes and the latest listings and approvals Standard Pipe Nom. Size mm in 3 1¼" 40 1½" 50 " 65 ½" 65 3"OD 80 3" 100 4" culus FM VdS LP ar psi ar psi bar ar psi Nom. Size mm in 15 5½"OD 15 5" 150 6½"OD 150 6" 00 8" 00 (K-9H) 8" culus FM VdS LP ar psi ar psi bar 16 ar psi Specialty Pipe Pipe XL-II S1387 DF /SF EL EF Fire-Flow FLF Sch. 5 Nom. culus FM culus FM culus FM culus FM FM FM culus culus Size psi psi psi psi psi psi psi psi psi psi psi psi ¼" ½" " ½" " " " " Pipe XL SPS LT Fire- Thread WST Ultra Eddy TL LS Gal-5 Super40 Super-XL Fire-Line Threadable EddyThread 40 Nom. culus culus FM FM FM FM FM FM FM culus culus Size psi psi psi psi psi psi psi psi psi psi psi ¼" ½" " ½" " refers to Listed Schedule 5 steel pipe. XL, XL-II refers to Listed XL, XL-II steel pipe manufactured by llied Tube & onduit orp. S1387(M) refers to ritish Standard Medium steel pipe. DF refers to Listed DYN-FLOW steel pipe manufactured by llied Tube & onduit orp. SF refers to Listed Super-Flo steel pipe manufactured by llied Tube & onduit orp. EL refers to Listed EDDYLITE steel pipe manufactured by ull Moose Tube o. EF refers to Listed EDDY FLOW steel pipe manufactured by ull Moose Tube o. FLF refers to Listed Fire-Line Flow steel pipe manufactured by Western International Forest Products Inc. SPS refers to Listed SPS Flow steel pipe manufactured by Yieh Phui Enterprise o Ltd LT refers to Listed LT steel pipe manufactured by llied Tube & onduit orp FLT refers to Listed Fire-Line Threadable steel pipe manufactured by Western International Forest Products Inc WST refers to Listed WST steel pipe manufactured by Wheatland Tube o ET40 refers to Listed Eddythread 40 steel pipe manufactured by ull Moose Tube o EZF refers to Listed EZ-Flow steel pipe manufactured by Northwest Pipe o FLT refers to Listed Fire-Line Threadable steel pipe manufactured by Western International Forest Products Inc G5 refers to Listed GL- 5 steel pipe manufactured by Idod Systems L SuXL, Su40 refers to Listed Super XL, Super 40 steel pipe manufactured by llied Tube & onduit orp XL or XL-II refers to Listed XL and XL-II steel pipe manufactured by llied Tube & onduit orp TL refers to Listed TL steel pipe manufactured by llied Tube & onduit orp G-03-3/4 Rev.. E c

9 K-9 G-01 General Notes: Pressure ratings listed are WP (cold water pressure) or maximum working pressure within the service temperature range of the gasket used in the coupling. This rating may occasionally differ from maximum working pressures listed and/or approved by culus and/or FM as testing conditions and test pipes differ. For additional information contact Shurjoint. Maximum working pressures and end loads listed are total of internal and external pressures and loads based on Sch. 40 steel pipe with roll grooves to NSI/WW specifications. For information on other pipe schedules contact Shurjoint. For one time field test only the maximum joint working pressure may be increased 1½ times the figures shown. Warning: Piping systems must always be depressurized and drained before attempting disassembly and or removal of any components. Shurjoint reserves the right to change specifications, designs and or standard equipment without notice and without incurring any obligations. G-03-4/4 Rev.. E d

10 Z07 HEVY DUTY RIGID OUPLING atalog 011 The Shurjoint Model Z07 is an angle-pad design rigid coupling for general piping applications where rigidity is required including, mechanical rooms, valve connections fire mains and long straight runs. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. Note: Model Z07N two-segment couplings are now available in sizes Model Z07 multi-segment couplings in sizes 14-4 are also available. ontact Shurjoint for the Z07 multisegment data sheet. Please specify the model required when ordering. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature 1¼ F lass F EPDM: 30 F / 110 lass Nitrile: 180 F / F lass *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. 1-1/4" ~ 4" Nominal Max. Working Max. End xial Dimensions olts Size Size Pipe O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs ~ M10 x ¼ ~ ⅜ x ⅛ ~ M10 x ½ ~ ⅜ x ⅛ ~ M10 x ~ ⅜ x ¾ ~ M10 x ½ ~ ⅜ x ¾ ~ M10 x mm ~ ⅜ x ¾ ~ M1 x ~ ½ x ~ M1 x ~ ½ x ~ M16 x mm ~ ⅝ x 3½ ~ M16 x ~ ⅝ x 3½ ~ M16 x mm ~ ⅝ x 3½ ~ M16 x ~ ⅝ x 3½ ~ M0 x ~ ¾ x 4¾ ~ ~ ⅞ x 6½ ~ ~ ⅞ x 6½ ~ M0 x JIS ~ ¾ x 4¾ ~ JIS ~ ⅞ x 6½ ~ JIS ~ ⅞ x 6½ (Z07N) ~ ~ ⅞ x 5½ (Z07N) ~ ~ ⅞ x 5½ (Z07N) ~ ~ ⅞ x 5½ (Z07N) ~ ~ x 5½ (Z07N) ~ ~ x 5½ 70.8 ontact Shurjoint for the data sheet of multi-segment type Z07 14 through 4 16 onnect with the est! opyright 011 Shurjoint

11 XH-1000 EXTR HEVY RIGID OUPLING atalog 011 The Shurjoint Model XH-1000 is an extra heavy rigid coupling designed for high pressure services up to 1000 psi (70 bar). This coupling is painted green and is supplied with a standard -shaped gasket and heavy duty bolts and nuts. The Model XH-1000 can be installed on standard roll or cut grooved pipes or components. Sizes through 4 require a bolt torque of Ft-Lbs. with some bolt gaps. For sizes 6 and above, the bolt pads will make metal to metal contact when properly installed with no torque wrench required. Working Pressure Max. Service (STD, Roll-grooved) Temperature " - 6" 1000 F lass EPDM: 30 F / 110 8" - 1" 750 F Nitrile: 180 F / 8 lass *Working pressure is based on connection with cut or roll-grooved standard wall steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Max. Working Max. End xial Dimensions olts Size Pipe O. D. Pressure Load Displacement Size Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. in Kgs / Lbs ~ ⅝ X ¾ ~ ~ ⅝ X ¾ ½ ~ ~ ⅝ X ¾ ~ ~ ¾ x 4¾ ~ ~ ⅞ x 5½ ~ ~ x 5½ ~ ~ x 5½ ~ ~ x 5½ ~ Sizes through 4 require a bolt torque of Ft-Lbs (80 95 N-m). Normally you can see some gaps between the bolt pads. Sizes 6 through 1 are designed to make a metal-to-metal contact when properly installed. onnect with the est! 17 opyright 011 Shurjoint

12 7705 FLEXILE OUPLING atalog 011 The Shurjoint Model 7705 is a standard flexible coupling designed for use in a variety of moderate pressure general piping applications. The Model 7705 coupling features flexibility that can accommodate misalignment, distortion, thermal stress, vibration, noise and seismic tremors. The Model 7705 can even accommodate an arced or curved piping layout. See Typical pplications - Flexible ouplings on page 14. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Max. ngular Movement Dimensions Nominal ctual Working Max. End xial Per oupling olt Size O.D. Pressure Load Displacement Degree Per Pipe Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs M10 x ⅜ x 1¾ M10 x ¼ ⅜ x ⅛ M10 x ½ ⅜ x ⅛ M10 x ⅜ x ⅛ M10 x ½ ⅜ x ⅛ M10 x mm ⅜ x ⅛ M1 x ½ x M1 x mm ½ x M1 x mm ½ x M1 x ½ x M16 x mm /8 x 3½ M16 x mm ⅝ x 3½ M16 x ⅝ x 3½ M16 x mm ⅝ x 3½ M16 x mm ⅝ x 3½ M16 x ⅝ x 3½ M16 x ⅝ x 3½ (7705H) M0 x ¾ x 4¾ M0 x ¾ x 4¾ ⅞ x 6½ M0 x JIS ¾ x 4¾ M0 x JIS ¾ x 4¾ JIS ⅞ x 6½.6 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. ll DIN size 7705 couplings up to DN150 size and the DN H coupling are VdS approved in addition to culus and FM approvals. 18 onnect with the est! opyright 011 Shurjoint

13 7707 HEVY DUTY FLEXILE OUPLING atalog 011 The Shurjoint Model 7707 heavy duty flexible coupling is designed for use in a variety of general piping applications of moderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe being used. The Model 7707 couplings feature flexibility that can accommodate misalignment, distortion, thermal stress, vibration, noise and seismic tremors. The Model 7707 can even accommodate an arced or curved piping layout. See Typical pplications - Flexible ouplings on page 14. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature 3/ F lass EPDM: 30 F / F Nitrile: 180 F / 8 lass *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. 3/4"~1" Nominal ctual Max. Working Max. End xial ngular Movement Dimensions olts Size O.D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in ( ) mm / m in / ft mm / in mm / in mm / in No. mm / in Kgs / Lbs M10 x ¾ ⅜ x 1¾ M10 x ⅜ x ⅛ M10 x ¼ ⅜ x ⅛ M1 x ½ ½ x ⅜ M1 x ½ x M1 x ½ ½ x M1 x mm ½ x M1 x ½ x M16 x ⅝ x 3½ M16 x mm ⅝ x 3½ M16 x ⅝ x 3½ M0 x mm ¾ x 4¾ M0 x ¾ x 4¾ ⅞ x 5½ ⅞ x 6½ ⅞ x 6½ M0 x JIS ¾ x 4¾ JIS ⅞ x 6½ JIS ⅞ x 6½ 5.5 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. onnect with the est! 19 opyright 011 Shurjoint

14 7707N FLEXILE OUPLING atalog 011 The Shurjoint Model 7707N is a twosegment, flexible coupling for use with standard pipe, roll or cut grooved to WW 606 specifications. For 6", see page 1 for groove dimensions. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum times the working pressure. 14" ~ 4" Size: 6" Nominal ctual Max. Working Pressure xial ngular Movement Dimensions olts Size O.D. XS (0.500 )* STD (0.375 ) LW (0.31 ) Displacement Degree Per Per Pipe Size Weight mm / in mm / in ar / PSI ar / PSI ar / PSI mm / in oupling ( ) mm / m in / ft mm / in mm / in mm / in No. in Kgs / Lbs ⅞ x 6½ x 6½ x 6½ x 6½ ⅛ x 6½ ⅛ x 6½ ⅞ x 9⅝ Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. * Pressure ratings are based on cut-grooved XS carbon steel pipe. 30" 7707L couplings on a chill water system 0 onnect with the est! opyright 011 Shurjoint

15 7707L LRGE DIMETER OUPLING atalog 011 The Shurjoint Model 7707L large diameter couplings in sizes 8-4 (700mm mm) are designed for joining large diameter IPS pipe that can be roll grooved. ll couplings feature a six to eight segment design, incorporating two bolts at each segment joint to ensure a positive connection and seal. Working Pressure (STD, Roll-grooved) Max. Service Temperature F EPDM: 30 F / 110 lass 15 1 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum times the working pressure. 8"~ 36" 40"~ 4" Nominal Pipe Max. Working Pressure xial Dimensions olts Size O. D. XS (.500 )* STD (.375 ) LW (.31 ) Displacement No Size Weight mm / in mm / in ar / PSI ar / PSI ar / PSI mm / in mm / in mm / in mm / in in Kgs / Lbs ⅞ x ⅞ x ⅞ x ⅞ x x 3½ x 3½ * Pressure ratings are based on cut-grooved XS carbon steel pipe. Standard Roll Groove for Large Diameter IPS Pipe O.D. t 1. Square cut: Max. allowable tolerances from square cut are 1.6mm (0.060 ).. The gasket seating surface shall be free from deep scores, marks, or ridges that would prevent a positive seal. 3. The dimensions are average values. The groove must be of uniform depth around the entire circumference. Use a Shurjoint groove or rule to check the groove diameter. 4. The t is the minimum allowable wall thickness that may be roll-grooved. 5. The d is for reference use only. The groove depth shall be determined by the groove diameter. 6. Flare Diameter: The pipe end that may flare when the groove is rolled shall be within this limit when measured at the extreme end of the pipe. d d t Max Pipe Outside Diameter Nominal +0.8, -1.6 ±0.8 +0, -1.6 Groove Depth Min. llow llowed Size asic Tolerance +0.03, ± , (ref) Wall thick Flare Dia. mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in OD OD OD OD OD OD OD onnect with the est! 1 opyright 011 Shurjoint

16 7706 REDUING OUPLING atalog 011 The Shurjoint Model 7706 reducing coupling allows for direct reduction on a piping run and eliminates the need for a concentric reducer and additional couplings. The specially designed rubber gasket helps prevent small pipe from telescoping into larger pipe during vertical assembly. The Model 7706 coupling should not be used with an end cap, as the end cap could be sucked into the pipe by the vacuum created when a system is being drained. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Max. End xial ngular Movement Dimensions olts Size O. D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar/psi kn / Lbs mm / in Degree ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs 40 x x ~ M10 x ½ x 1¼ x ~ ⅜ x ⅛ x x ~ M10 x x 1½.375 x ~ ⅜ x ⅛.0 65 x x ~ M10 x ½ x.875 x ~ ⅜ x ⅛ x ~ M10 x mm x x ~ ⅜ x ⅛.6 80 x x ~ M1 x x x ~ ½ x x x ~ M1 x x ½ x ~ ½ x x ~ M1 x x 76.1mm x ~ ½ x x x ~ M1 x x x ~ ½ x x x ~ M1 x x ½ x ~ ½ x x ~ M1 x x 76.1mm x ~ ½ x x x ~ M1 x x x ~ ½ x x ~ M16 x mm x x ~ ⅝ x 3½ x x ~ M16 x x x ~ ⅝ x 3½ x ~ M16 x mm x x ~ ⅝ x 3½ x x ~ M16 x x x ~ ⅝ x 3½ x ~ M16 x mm x x ~ ⅝ x 3½ x x ~ M16 x x x ~ ⅝ x 3½ x x ~ M0 x x x ~ ¾ x 4¾ x ~ M0 x x 165.1mm x ~ ¾ x 4¾ 14.3 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. onnect with the est! opyright 011 Shurjoint

17 g-8 hinged lever coupling atalog 011 The Model G-8 Hinged Lever oupling is designed for quick connect and disconnect services. The housing segments are hinged with a locking lever handle for easy assembly. The use of the split pin can secure and prevent the accidental opening of the coupling. Working Pressure (STD, Roll-grooved) Max. Service Temperature F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Split pin Nominal Pipe Max. Working xial Dimensions Deflection Size O. D. Pressure Displacement Degree Weight mm / in mm / in ar / PSI mm / in mm / in mm / in mm / in ( ) Kgs / Lbs ' 1½ ' ' ½ mm - 4' ' ' mm - 37' ' mm - 14' ' ' ' Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. Expansion Pipe Lever handles are factory assembled tight for safety. The use of an expansion pipe will aid the easy opening and closing. Expansion pipes are available upon request. onnect with the est! 3 opyright 011 Shurjoint

18 -7 OUTLET OUPLING atalog 011 The Model -7 Outlet oupling combines the features of a coupling and a reducing outlet. The -7 facilitates an easy reducing branch outlet without the need of a mechanical tee or reducing tee and couplings. The -7 is available with grooved, male threaded or female threaded outlets. This fitting is recommended for fire sprinkler and other pipelines of moderate pressure. The -7 Outlet oupling can be used for dry pipe systems or vacuum services up to 10 inhg or 54 mmhg, which may occur when the system is drained. Grooved Outlet T Working Pressure Max. Service (STD, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Threaded Outlet Nominal Size Max. Max. Dimensions Run Outlet Working xial End olt pipe FPT Gr / MPT Pressure Displacement Load T* Size Weight mm / in mm / in mm / in ar / PSI mm / in kn / Lbs mm / in mm / in mm / in mm / in mm / in Kgs / Lbs ~ ½ ~ ~ M10 x ½ ¾ ~ ⅜ x ⅛ ~ ~ ~ ½ ~ ~ M10 X ¾ ~ ⅜ x ⅛ ~ ~ ~ ½ ~ ~ ¾ ~ ~ M1 X 60.0 ½ ~ ½ x ⅜ ~ ¼ 1¼ ~ ~ ½ 1½ ~ ~ ¾ ~ ~ ~ M1 X ~ ½ x ¼ ~ ~ ½ 1½ ~ ~ ¾ ~ ~ ~ M16 X ~ ⅝ x 3½ ½ 1½ ~ ~ ~ ~ ¾ ~ ~ ~ M16 X ~ ⅝ x 3½ ½ 1½ ~ ~ ~ FPT : Female threaded outlet Gr: Grooved outlet MPT: Male threaded outlet *T : enter of run pipe to end of outlet pipe (dimensions approximate). Female threaded outlet only. 4 onnect with the est! opyright 011 Shurjoint

19 7706-T TRNSITION OUPLING atalog 011 Model 7706-T Transition ouplings allows for a direct transition from IPS pipe sizes to ISO pipe sizes. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. ISO PIPE IPS PIPE Nominal Pipe Max. Working Max. End xial ngular Movement Dimensions olts Size O. D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar/psi kn / Lbs mm / in Degree ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs 73.0 x ~ M10 x ½ x 76.1mm x ~ ⅜ x ⅛ x ~ M16 x x 165.1mm x ~ ⅝ x 3½ 7.7 *Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. MODEL 7771-T Transition coupling The Shurjoint Model 7771-T Transition oupling allows for a direct transition from IPS pipe sizes to JIS pipe sizes. vailable in nominal pipe sizes from 8 through 1 this coupling can accommodate a combination of pipes, valves and or fittings with a single coupling. olt pads are designed to make metal to metal contact to provide for a secure and rigid joint. The stepped exterior design of the housings help to ensure the correct positioning of IPS and JIS sides. Stepped Design Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 IPS PIPE JIS PIPE *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal ctual Pipe O.D. Max. Working Max. Total xial Dimensions olts Size IPS JIS Pressure End Load Displacement Size Weight mm / in mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm Kgs / Lbs M16 x M0 x M x onnect with the est! 5 opyright 011 Shurjoint

20 XH-70EP EXTR HEVY RIGID OUPLING With End Protection (EP) Gasket atalog 011 The Model XH-70EP is designed for use with plastic coated or cement lined pipe. The EP (end protection) gasket serves to form a continuous lined surface at the joint and also helps protect the pipe ends from corrosion. This coupling is rated up to 500 psi (175 bar) when used in conjunction with machined EP cut grooves and the applicable pipe. UTION: lways fasten the bolts to the required torque. EP Gasket Nominal Max. Working Max. End Dimensions olt / Nut olt Size Pipe O. D. Pressure Load Size Torque Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in No. in N-m / Lbs - Ft Kgs / Lbs ⅝ x ¾ ⅝ x ¾ ½ ⅝ x ¾ ¾ x 4¾ ⅞ x 5½ x 5½ x 5½ x 5½ *Pressures quoted are based on EP cut grooved XS (Sch. 80) pipe. EP ut-groove specification O.D. d T 1. EP cut-grooves are for plastic coated or cement lined pipe to be connected with Shurjoint XH-70EP couplings only. Do not roll groove pipe, which can damage the coating or lining and or create flared pipe ends.. lways use plain-end square cut pipe. Do not use beveled end pipe. 3. lways use an EP gasket with a XH-70EP coupling. Do not use a standard gasket. 4. The gasket seating area shall be free from deep scores, marks, or ridges that could prevent a positive seal. Nominal Pipe O. D. Gasket Seat Groove Width Groove Dia. Grv. Depth Min. Wall Size asic Tolerance asic Tol. asic Tol. asic Tol. d thickness T mm / in mm / in mm / in mm / in mm / in ± mm / in +0.5/ mm / in +0/+0 (ref.) mm / in ± ± ± ½ ± ± ± ± ± ± ± ± ± ± ± ± ± onnect with the est! opyright 011 Shurjoint

21 atalog 011 Flange dapters Shurjoint offers a variety of flange adapters through 4 (50mm 600mm) to transition from a flanged system to a grooved system. Flange drillings available include NSI lass 15/150, lass 300, PN 10/16 and S 10 Table E. Flange adapters through 1 are supplied hinged as a single assembly while 14 through 4 (7041N) are supplied with two independent segments and a draw kit. Hinged Flange Segment Gasket Factory Supplied olt & Nut Factory Supplied olts & Nuts Flange Segment Gasket lways use factory-supplied bolts and nuts to assemble flange segments. The use of other bolts may cause joint failure " ~ 1" 7041N 14" ~ 4" (With a draw kit) 14 4 : Supplied with a draw kit Important Notes 1. Models 7041 and 7043 flange adapters require a hard flat face for effective sealing. When the mating surface is not adequate as with the serrated faces of some valves or rubber-faced wafer valves, a sandwich plate (Model 49, see page 30) must be used. #7041 Flange Sandwich Plate #7041 Flange Flange to mate (Rubber surface) Rubber faced or lined Flange to mate (Serrated face). The Model 7041 flange adapter has small triangular teeth inside the key shoulder to prevent the pipe from rotating. The teeth should be ground off when mating to a rubber-lined flange, plastic pipe and or light wall pipe. 3. Models 7041 and 7043 flange adapters shall not be used as anchor points for tierods across non-restrained joints. 4. When assembling a Model 7041 or 7043 flange adapter against a butterfly valve or ball valve, make sure that the outside diameter of the flange adapters do not Interfere interfere with the valve actuator or the mounting pad of the actuator. 5. olt tightening sequence: Like a regular flange joint, it is important to make flange faces contact parallel. Tighten nuts alternately in the sequence of diagonally opposite pairs as shown below until the flange faces meet and make a metal-tometal contact Hinged Sandwich Plate Regular Flange Gasket utterfly Valve Hinged 11 onnect with the est! 7 opyright 011 Shurjoint

22 7041 FLNGE DPTER - NSI lass 15/150 atalog 011 The Shurjoint Model 7041 flange adapters through 1 are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 Tooth D E D E *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 450 psi (30 bar) per NSI (hinged) 7041N 14-4 (supplied with a draw kit) Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs ⅝ ⅝ ½ ⅝ ⅝ ¾ ¾ ¾ ⅞ ⅞ ⅛ ⅛ ¼ ¼ Required bolt torque The tables show standard torque values for proper assembly of Shurjoint flange adapters. Use a torque wrench so that all the nuts are tightened equally with a same torque value. Shurjoint flange adapters are sealed with elastic (rubber) gaskets, which require much lower torques than those that utilize metallic gaskets. Required Torque for Model 7041 Flange dapters (NSI lass 15/150) Nom. Size olt Size Required Torque inch inch N-m Lbs-Ft " ⅝ (4) ½" ⅝ (4) " ⅝ (4) " ⅝ (8) " ¾ (8) " ¾ (8) " ¾ (8) " ⅞ (1) " ⅞ (1) " 1 (1) " 1 (16) " 1⅛(16) " 1⅛ (0) " 1¼ (0) ( ): No. of bolts Required Torque for Model 7041 Flange dapters (PN 10/16) Nom. Size olt Size Required Torque mm mm N-m Lbs-Ft 50 M16 (4) M16 (4) M16 (8) M16 (8) M0 (8 ) M0 (8) M0 (1) M4 ( 1) M4 (1) M4 (16) M7 (16) M7 (0) M30 (0) M33 (0) ( ): No. of bolts 8 onnect with the est! opyright 011 Shurjoint

23 7041 FLNGE DPTER - PN 10 / PN 16 atalog 011 The Shurjoint Model 7041 flange adapter allows for a direct connection with PN 10/16 flanges. The two-segment design provides an easy and fast installation. through 1 Working Pressure Max. Service (STD, Roll-grooved) Temperature 5 F EPDM: 30 F / 110 PN Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 1.5 times the working pressure, nonshock cold water. flange adapters are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Tooth D E - 1 (hinged) 7041N 14-4 (supplied with a draw kit) D E Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm mm ar kn mm mm mm mm mm mm No. Kgs M M M M M M M M M M M M M M Note: " - 6" flange drilling to PN10 / PN16 and 8" and above to PN16. See page 8 for required bolt torque. MODEL 7041 FLNGE DPTER - S 10-E The Shurjoint Model 7041 flange adapter allows for a direct connection with S 10 Table E flanges. The two-segment design provides an easy and fast installation. through 1 flange adapters are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Working Pressure (STD, Roll-grooved) Max. Service Temperature 00 F EPDM: 30 F / 110 PN Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 1.5 times the working pressure, nonshock cold water. D E Tooth D E - 1 (hinged) 7041N 14-4 (supplied with a draw kit) Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm mm ar kn mm mm mm mm mm No. in Kgs ⅝ ⅝ ⅝ ⅝ ¾ ¾ ¾ ⅞ ⅞ ⅞ ⅞ ⅞ ⅛ 54.6 onnect with the est! 9 opyright 011 Shurjoint

24 7043 FLNGE DPTER - NSI LSS 300 atalog 011 The Shurjoint Model 7043 flange adapter allows for direct connection of a grooved system to NSI lass 300 flanged components. " through 8" Model 7043 flange adapters are supplied hinged as a single assembly, while large sizes are supplied with separate segments. X Z Working Pressure (STD, Roll-grooved) Max. Service Temperature 750 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 115 psi (77 bar) per NSI D E Y Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load X Y Z D E Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs ⅝ ¾ ½ ¾ ¾ ¾ ¾ ⅞ ⅛ MODEL 49 SNDWIH PLTE The Model 7041 and 7043 flange adapters require a hard flat surface for effective gasket sealing. sandwich plate is required and should always be used when the mating surface is not adequate as with the serrated faces of some valves or the rubber-faced or rubber-lined flange adapters of a wafer valve. Material: Mild-steel, electro-zinc plated. Stainless steel, type 304 or 316 is available on request. E D Sandwich plate Nominal Size E D mm / in mm / in mm / in ½ onnect with the est! opyright 011 Shurjoint

25 7180 UNIVERSL FLNGE DPTER atalog 011 The Model 7180 Universal Flange dapter provides a rigid transition from a flanged component to a grooved system. The single unit is compatible for a range of flange types including NSI lass 15/150, PN10, PN16, and JIS 10K. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. X Y Z D Y : Flange Drilling olts Size Nominal Pipe NSI PN JIS S Size O.D. L X 15 / ,16 10K 10E Z Dia No. Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs M ⅝ M ½ ⅝ M mm ⅝ M ⅝ M ⅝ M16 / M mm ⅝ / ¾ M16 / M ⅝ / ¾ M mm ¾ M ¾ M0 8 / ¾ 8 / M0 8 / JIS ¾ 8 / L MODEL 7181 UNIVERSL REDUING FLNGE DPTER The Model 7181 Universal Reducing Flange dapter provides a rigid transition between a flanged piping system and a one or two-size reduced grooved system without the need of a concentric reducer. The flange drilling is compatible to NSI 15/150, PN10/16, S-10E and JIS 10K. Working Pressure Max. Service (STD, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. X Y Z D Y: Flange Drilling olts Nominal Pipe NSI PN JIS Size OD L X Z 15 / , 16 10K D Dia. No. Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lb 80 x x M x x ⅝ x x M x ½ x ⅝ x 76.1mm x M x ⅝ x x M x x ⅝ x x M x x ¾ L onnect with the est! 31 opyright 011 Shurjoint

26 7170 FLNGE DPTeR - NSI LSS 15/150 atalog 011 The Model 7170 Flange daptor provides a rigid transition between NSI class 15/150 flanged components and a grooved system. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 X Y Z D olt Hole *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. L Nominal Pipe olt olt Hole Size X Y Z Size Dia. No. D L Weight mm / in mm / in mm / in mm / in in in mm / in mm / in Kgs / Lbs ⅞ ⅞ ⅛ ⅛ ⅛ 1¼ ⅛ 1¼ ¼ 1⅜ onnect with the est! opyright 011 Shurjoint

27 Mechanical Tees Hole-cutting atalog 011 Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M1 features a female threaded outlet and M features a grooved end outlet. Model 771 (female threaded outlet) and 77 (grooved end outlet) are available in 8 sizes. The Model 73 Saddlelet features a compact-design for making direct connections to sprinkler heads, drop nipples and or gauges. The hole-cut method of pipe preparation is required when using mechanical tees, mechanical crosses, and saddle-lets. The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. lways use the correct hole saw size as shown in Table 1 Ridgid Model No. H-300 Hole utting Tool 16mm ( ⅝" ) and Table 1-b and never use a torch for cutting a hole. fter the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole lignment Tab olt Pad Gasket Lower Housing Upper Housing Nut olt Locating ollar should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. The area within the dimension should also be inspected and must be free of dirt, scale or any imperfection that could affect proper seating or assembly of the fitting. Hole Size: The hole sizes are dictated by the branch size of the mechanical tee. When bolts are tightened with a proper torque, the outlet housing makes metal to metal contact with the outer surface of the pipe. Metal-to-metal Gap It is normal to see bolt pad gaps Table 1 Hole Sizes for Mechanical Tees unit: mm/in ranch Hole Dimensions Surface Size Hole Saw Max dia. Preparation Size llowed 15, 0, ½, ¾, 1 1½ 1⅝ 3½ 3, 40 51* 54* 10 1¼, 1½ ⅛ ½ ⅝ 4½ ½ ¾ ⅞ 4¾ ½ 3⅝ 5½ ½ 4⅝ 6½ *See Table 1-b for exception.` Table 1-b Exception The hole must be cleanly cut using the correct size hole-saw and shall have a smooth edge. Never use a torch for cutting a hole. Hole Dimensions Surface Run x ranch Hole Saw Max dia. Preparation Size llowed 50 x 3 / 50 x x1¼ / x 1½ 1¾ 1⅞ 4 onnect with the est! 33 opyright 011 Shurjoint

28 M1 MEHNIL TEE FEMLE THREDED OUTLET atalog 011 Threads are NPT per NSI or SPT per ISO 7. UL/FM working pressure is 0 bar (300 psi). The Model 771 is available in 8" sizes. Working Pressure (STD, Roll-grooved) Max. Service Temperature F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. T D Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x x M10 x x ½.375 x ⅜ x ⅛ x x M10 x x ¾.375 x ⅜ x ⅛. 50 x x M10 x x x ⅜ x ⅛ x x 4. [45] M10 x x 1¼.375 x [1.75] ⅜ x ⅛ x x 48.3 [45] M10 x x 1½.375 x [1.75] ⅜ x ⅛ x x M1 x x ½.875 x ½ x ⅜ x x M1 x x ¾.875 x ½ x ⅜ x x M1 x x x ½ x ⅜ x x M1 x x 1¼.875 x ½ x ⅜ x x M1 x x 1½.875 x ½ x ⅜ x M1 x x x ½ x ⅜ x M1 x x x / x -3/ x M1 x x x ½ x ⅜ x M1 x x x ½ x ⅜ x M1 x x x ½ x ⅜ x x M1 x x ½ x ½ x x x M1 x x ¾ x ½ x x x M1 x x x ½ x x x M1 x x 1¼ x ½ x x x M1 x x 1½ x ½ x x x M1 x x x ½ x x x M1 x x ½ x ½ x x x M1 x x ¾ x ½ x x x M1 x x x ½ x x x M1 x x 1¼ x ½ x x x M1 x x 1½ x ½ x Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. ontinued on next page 34 onnect with the est! opyright 011 Shurjoint

29 M1 & 771 MEHNIL TEES FEMLE THREDED OUTLET atalog 011 The Shurjoint Model M1 & 771 mechanical tees provides a fast and easy mid-pipe threaded branch outlet. Threads are NPT per NSI or SPT per ISO 7. UL/FM working pressure is 0 bar (300 psi). T D ontinued from previous page Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 100 x x M1 x x x ½ x x x M1 x x ½ x ½ x x M1 x x x ½ x x x M1 x x x ½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x ½ x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x /8 x 3-1/ x M16 x x x ⅝ x 3½ x x M16 x x 1¼ 6.65 x ⅝ x 3½ x x M16 x x 1½ 6.65 x ⅝ x 3½ x x M16 x x 6.65 x ⅝ x 3½ x x M16 x x ½ 6.65 x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ MODEL 771 Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 00 x x 60.3 [70] M0 x x 8.65 x.375 [.75] ¾ x 4¾ x x M0 x x x ¾ x 4¾ x x M0 x x x ¾ x 4¾ x x M0 x x x ¾ x 4¾ Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. onnect with the est! 35 opyright 011 Shurjoint

30 M MEHNIL TEE GROOVED-END OUTLET atalog 011 The groove dimensions conform to WW 606. UL/FM working pressure is 0 bar (300 psi). The Model 77 is available in 8" sizes. D Working Pressure (STD, Roll-grooved) Max. Service Temperature F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x x M10 x x x ⅜ x ⅛.7 50 x x 4. [45] M10 x x 1¼.375 x [1.75] ⅜ x ⅛ x x 48.3 [45] M10 x x 1½.375 x [1.75] ⅜ x ⅛ x x M1 x ½ x x ⅜ x ⅜ x x M1 x ½ x 1¼.875 x ⅜ x ⅜ x x M1 x ½ x 1½.875 x ⅜ x ⅜ x M1 x x x ½ x ⅜ x M1 x x x ½ x ⅜ x M1 x x x ½ x ⅜ x x M1 x x x ½ x x x M1 x x 1¼ x ½ x x x M1 x x 1½ x ½ x x x M1 x x x ½ x x x M1 x x x ½ x x x M1 x x 1¼ x 1, ½ x x x M1 x x 1½ x ½ x x x M1 x x x ½ x x x M1 x x ½ x ½ x x M1 x x x ½ x x x M1 x x x ½ x x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x ½ 5.563x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ Hole diameters listed are suggested hole saw diameters.. Special caution is required to some exceptional hole sizes shown in [ ]. 36 onnect with the est! opyright 011 Shurjoint ontinued on next page

31 M & 77 MEHNIL TEE GROOVED-END OUTLET atalog 011 The groove dimensions conform to WW 606. UL/FM working pressure is 0 bar (300 psi). The Model 77 is available in 8" sizes. D ontinued from previous page (Model M) Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x M16 x x x ⅝ x 3½ x x M16 x x 1¼ 6.65 x /8 x 3½ x x M16 x x 1½ 6.65 x ⅝ x 3½ x x M16 x x 6.65 x ⅝ x 3½ x x M16 x x ½ 6.65 x ⅝ x 3½ x x M16 x x x ⅝ x 3½ x x M16 x x x ⅝ x 3½ 8.91 MODEL 77 Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 00 x x 60.3 [70] M0 x x 8.65 x.375 [.75] ¾ x 4¾ x x M0 x x ½ 8.65 x ¾ x 4¾ x M0 x x x ¾ x 4¾ x x M0 x x x ¾ x 4¾ x x M0 x x x ¾ x 4¾ Hole diameters listed are suggested hole saw diameters.. Special caution is required to some exceptional hole sizes shown in [ ]. onnect with the est! 37 opyright 011 Shurjoint

32 73 SDDLE-LET Small Mechanical Tee atalog 011 The Model 73 Saddle-Let is the ideal outlet fitting for making direct connections to sprinkler heads, drop nipples and or gauges. No need for welding, just cut or drill a hole at the desired outlet location. Working Pressure Max. Service (STD, Roll-grooved) Temperature F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. T Nominal Hole Dia. Dimensions Take-Out, olt olt Size +1.6, -0 / , -0 T Size Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in in N-m / Lb-Ft Kgs / Lbs 3 x /8Ø ¼ x ½ U-olt x /8Ø ¼ x ¾ U-olt x /8Ø ¼ x U-olt x /8Ø ½ x ½ U-olt x /8Ø ½ x ¾ U-olt x /8Ø ½ x U-olt x /8Ø x ½ U-olt x /8Ø x ¾ U-olt x /8Ø x U-olt x /8Ø ½ x ½ U-olt x /8Ø ½ x ¾ U-olt x /8Ø ½ x U-olt Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) Hole utting The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. lways use the correct hole saw size as shown in the table and never use a torch for cutting a hole. fter the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. Hole Sizes for 73 Saddle-let unit: mm/in Hole Dimensions Surface Saddle- Let Hole Saw Max dia. Preparation ranch Size Size llowed 15, 0, ½, ¾, /16 1¼ 3½ 16mm ( ⅝" ) 38 onnect with the est! opyright 011 Shurjoint

33 Performance Data Sheet - Ductile Iron ouplings on arbon Steel & Stainless Steel Pipe atalog 011 The following tables show maximum working pressures (WP) of Shurjoint ductile iron couplings and flange adapters used on both carbon steel and stainless steel pipes. Shurjoint ductile iron unit: psi Model Z05 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1¼ ½ ½ couplings can be used in conjunction with stainless steel pipe in non-corrosive environment as the flow media does not come in direct contact with the coupling housings but rather only the gasket. unit: psi Model Z05 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1¼ ½ ½ NR NR NR Model Z07 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1¼ ½ ½ Model Z07 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1¼ ½ ½ NR NR NR NR NR Model XH-1000 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch NR ½ NR NR NR NR NR NR NR Model 7705 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch ¼ ½ ½ Model 7707 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 ¾ ¼ ½ ½ Model XH-1000 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S NR ½ NR NR NR NR NR NR NR Model 7705 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S ¼ ½ ½ NR NR NR NR NR NR NR Model 7707 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S ¾ ¼ ½ ½ NR NR NR NR NR onnect with the est! 39 opyright 011 Shurjoint

34 atalog 011 unit: psi Model M-7 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch ½ unit: psi Model M-7 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S ½ NR NR Model 7706 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ x 1¼ x '1½ ½ x x x '½ x x '½ x x x x x Model G8 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ NR NR ½ NR NR NR NR NR NR NR NR Model 7706 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1½ x 1¼ x '1½ ½ x x x '½ x x '½ x x NR 6 x NR 6 x NR 8 x NR Model G8 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S '1½ NR NR NR NR NR NR NR NR NR NR NR NR NR Model -7 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ x * x * ½ x * x * x * x * Model -7 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1½ x * x * ½ x * x * x * x * * = all branch sizes, threaded and grooved.. * = all branch sizes, threaded and grooved.. Model 7041 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch NR ½ NR NR NR NR NR NR NR NR NR NR NR NR NR Hydrostatic shell test: 450 psi (30 ar) per NSI 16.5 Model 7043 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch NR ½ NR NR NR NR NR NR NR NR Hydrostatic shell test: 115 psi (77 ar) per NSI 16.5 Model 7041 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S ½ NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR Model 7043 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S NR NR ½ NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR NR 40 onnect with the est! opyright 011 Shurjoint

35 Section ast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 4 Flow Data / Friction Resistance... 4 Ductile Iron Grooved Fittings 7110 / 7111 / 711 / 7113 Elbows / 7135 / 7130 Tee, ross, Lateral Reducing Tee / 7151 oncentric & Eccentric Reducers / 7160T / 7160H / 7160P aps LR / 7111LR / 7137 / 711G / Elbows & True-Y / 903 / 7110DR / 717 Elbows & Tee / 7150F / 7150M ullhead Tee & Reducers / 55 / 56 End-ll & Nipples / 851 / 853 Sprinkler Hubs / 71 / 7133 Hydrant Elbow & Tees Wrought Grooved Fittings W110 / W110LR / W111LR / W10 / W160 / W11 Elbows & Tee..54 W150 / W151 / 57 / 58 / 59 oncentric & Eccentric Reducers, Nipples L90-3D / L60-3D / L45-3D / L30-3D / L-3D / L11-3D Elbows L90-5D / L60-5D / L45-5D / L30-5D / L-5D / L11-5D Elbows L90-6D / L60-6D / L45-6D / L30-6D / L-6D / L11-6D Elbows Extra Heavy Grooved Fittings 10EP / 11EP / 0EP / 35EP / EP Elbows, Tees & ross onnect with the est! atalog 011

36 Shurjoint Grooved Fittings atalog 011 Shurjoint offers a wide range of grooved-end fittings in sizes through 4 (600mm). Fittings are available in a number of styles and configurations to support a variety of applications. Shurjoint grooved-end fittings are manufactured and designed to meet STM F1548 and NSI/WW 606 requirements for use with grooved mechanical couplings conforming to STM F1476. For sizes not specified in these standards, please refer to applicable groove specifications shown in this catalog. Size Nom. Working Pressure Max. Service Rating (STD, Roll-grooved) Temperature F lass 300 (5 150).. 5 EPDM: F 30 F / 110 lass 50 (00 300).. 8 Nitrile: F 180 F / 8 lass 150 (50 600).. 0 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Most fittings are provided in ductile iron conforming to STM 536 Gr and or STM 395 Gr Some styles and sizes larger than 14 (350mm) are fabricated from carbon steel pipe to STM 53 Gr. or fabricated of segmentally welded steel of the same or equivalent grade. Fittings are painted orange or red, or as an option can be supplied hot-dip galvanized or epoxy coated. Rubber Lined Fittings Shurjoint ductile iron grooved end fittings are also available with rubber lining for abrasive services. ontact Shurjoint for further information. For abrasive services For abrasive and corrosive services Flow Data / Frictional Resistance Expressed as equivalent length of straight pipe Elbows Tees Nominal Pipe Pipe Wall # # #7110LR 90 # #7111LR 45 #710 #903 Size O.D. Thickness Std. Radius Short. Radius 1½ D. LR Std. Radius 1½ D. LR ranch ranch mm / in mm / in mm / in meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet ¼ ½ ½ The values listed in this table express the frictional resistance of representative Shurjoint fittings as equivalent feet (meters) of straight pipe. For the branch of a tee that is reduced in size, use the value that corresponds to the branch size. For example, the branch value of a 4 x 4 x 3 tee is 1.8 feet (3.9 meters). For fittings not listed in this table, the equivalent length of straight pipe can be estimated from the data provided. For example, the flow resistance of a ½ elbow is approximately one half that of a 45 elbow. 4 onnect with the est! opyright 011 Shurjoint

37 MODEL elbow elbow 711 -½ elbow ¼ elbow atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr and or STM 395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings Elbow Elbow 711 ½ Elbow ¼ Elbow Nominal Pipe # Elbow # Elbow #711 ½ Elbow # ¼ Elbow Size O. D. - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm mm mm JIS JIS JIS onnect with the est! 43 opyright 011 Shurjoint

38 710 tee 7135 cross lateral atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr and or STM 395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. -LE -SE -LE 710 Tee 7135 ross Lateral Nominal Pipe #710 Tee #7135 ross # Lateral Size O. D. - E Weight - E Weight - LE - SE Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm JIS JIS JIS onnect with the est! opyright 011 Shurjoint

39 711 reducing tee atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr and or STM 395 Gr dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. 711 Reducing Tee 711 Reducing Tee (Threaded) Nominal Pipe Standard Threaded r. Size O. D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 50 x x 60.3 x x x1½.375 x.375 x x 65 x x 73.0 x ½ x ½ x x.875 x x 65 x x 76.1 x ½ x ½ x 1½ x x x 65 x x 73.0 x ½ x½ x.875 x.875 x x 65 x x 76.1 x ½ x ½ x x x x 80 x x 88.9 x x 3 x x x x 80 x x 88.9 x x 3 x 1½ x x x 80 x x 88.9 x x 3 x x x x 80 x x 88.9 x x 3 x ½ x x x 80 x x 88.9 x x 3 x ½ x x x 100 x x x x 4 x x x x 100 x x x x 4 x x x x 100 x x x x 4 x ½ x x x x x 100 x 76.1mm x x x 100 x x x x 4 x x x x 15 x x x x 5 x x x x 15 x x x x 5 x x x x 150 x x x x 6 x 6.65 x 6.65 x x 150 x x x x 6 x ½ 6.65 x 6.65 x Nominal Pipe Standard Threaded r. Size O. D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 150 x 150 x x x x 6 x x 6.65 x x 150 x x x x 6 x x 6.65 x x x x x x 6 x x x x x x165.1 x x x x x x x x 6 x x x x x x x x 6 x x x x 00 x x 19.1 x x 8 x 8.65 x 8.65 x x 00 x x 19.1 x x 8 x x 8.65 x x 00 x x 19.1 x x 8 x x 8.65 x x 00 x x 19.1 x x 8 x x 8.65 x x 50 x x 73.0 x x 10 x x x x 50 x x 73.0 x x 10 x x x x 50 x x 73.0 x x 10 x x x x 300 x x 33.9 x x 1 x x x x 300 x x 33.9 x x 1 x x x x 300 x x 33.9 x x 1 x x x x 300 x x 33.9 x x 1 x x x x 300 x x 33.9 x x 1 x x x onnect with the est! 45 opyright 011 Shurjoint

40 7150 ONENTRI REDUER 7151 EENTRI REDUER atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr and or STM 395 Gr dimensions are manufacturer s standard. See page 55 for wrought steel grooved-end fittings. E-E 7150 onc. Reducer E-E 7151 Ecc. Reducer Nominal Pipe #7150 onc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 3 x 5 4. x ¼ x x x x ½ x x x x ½ x 1¼ x x x x x x x x 1¼.375 x x x x 1½.375 x x x ½ x.875 x x mm x x x x x x x x x 1¼ x x x x 1½ x x x x x x x x x x x x ½ x x x x x x x x ½ x x x 76.1mm x x x x x x x x x x x x 6.65 x x x x ½ 6.65 x x x x x x x x x x x x x x mm x x mm x x 76.1mm x Nominal Pipe #7150 onc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 00 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x onnect with the est! opyright 011 Shurjoint

41 7160 END P MODEL 7160T TRNSITION P MODEL atalog H domed end P Shurjoint Model 7160T is an ideal transition fitting when a large reduction is required and can be used in place of more costly reducers or swaged nipples. In addition the 7160T can serve as a drain fitting. Shurjoint 7160H end caps are cast of ductile iron and are designed to withstand pressure evenly over the entire spherical surface. The Model 7160H End ap is designed for use on 10-4 mechanical piping applications. E-E 1 ~ 1 Nominal Pipe #7160 End ap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs ¼ ½ ½ mm mm mm mm mm mm JIS JIS JIS SW: segment-welded steel. L 7160T Nominal Size Grooved x Threaded L Weight mm / in mm / in Kgs / Lbs 50 x x x x 1¼ x ½ x x ½ x 1¼ x ½ x 1½ x x x x 1¼ x x 1½ x x x x x x 1¼ x x 1½ x x x x x x 1¼ x x 1½ x x E-E 10 ~ 4 Nominal Pipe #7160H Domed End ap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs MODEL 7160P END P w/plug Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in ½ ½.875 ½ mm ½ Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in mm mm ½ ½ ½ onnect with the est! 47 opyright 011 Shurjoint

42 S 7110LR 1.5D 90 elbow 7111LR 1.5D 45 elbow 7137 TRUE-Y 7110LR LR 90 Elbow, 1.5D 7111LR LR 45 Elbow, 1.5D -LE 7137 True-Y atalog 011 -SE Nominal Pipe #7110LR 1.5D LR 90 Elbow #7111LR 1.5D LR 45 Elbow #7137 TRUE-Y Size O. D. - E - E - LE - SE mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs ½ mm mm mm MODELS 711G Goose Neck -½ Elbow MODEL ELOW With ase Support Two model 711G elbows in combination with a coupling will serve as a universal joint and is ideal for instances where a pipe line is in need of a slight adjustment during make-up. The Model is a ductile iron 90 grooved-end elbow with base support, designed for installation at the bottom of a riser system. n anchor can be placed in conjunction with the base to support the weight of the pipe, coupling and fluid. E-E U H Nominal Pipe 711G ½ Elbows Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs G 0.6 1½ G G 1.0 ½ G G G G G G JIS T S M Nominal Pipe Dimensions Size O. D. - E H u T S M Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs onnect with the est! opyright 011 Shurjoint

43 S SR ELOW 903 SR tee atalog 011 Shurjoint short radius fittings, while primarily designed for fire protection applications, can also be used for general service requirements. Nominal Pipe Pipe #901 SR 90 Elbow #903 SR Straight Tee Size O.D. - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs ½ mm mm MODEL 7110DR DRIN ELOW The Model 7110DR is a grooved-end ductile iron cast elbow with an integral 1" NPT or SP drain. The 7110DR is designed for use in fire protection and general service applications. D E 1" NPT Nominal Pipe Pipe Dimensions Size O.D. - E D E Weight mm / in mm / in mm / in mm / in mm / in Kgs / Lbs ½ mm mm MODEL 717 STNDPIPE TEE NPT or SP The Model 717 is a grooved-end tee with a ½" NPT/SP threaded branch, specially designed for use on fire protection standpipes. Nominal Pipe Dimensions Size O.D. - ER - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 100 x x x x 4 x ½ x x x 150 x x x x 6 x ½ 6.65 x 6.65 x R onnect with the est! 49 opyright 011 Shurjoint

44 76 Y-STRINER atalog 011 The Shurjoint Model 76 Grooved-end Y-Strainers are designed to strain foreign matter and debris from piping systems and provide inexpensive protection for costly pumps, meters and other pipeline components. The Model 76 features a low pressure drop, fast installation, easy maintenance and is suitable for either vertical or horizontal installation. Standard Screen: 1/16 (1.6mm) perforated for 3 sizes and 1/8 (3.mm) perforated for Other customized screen perforations are also available upon request. Size Nom. Working Max. Service in / mm Rating Pressure Temperature F lass EPDM: 30 F / 110 8" 30" 175 F Nitrile: 180 F / 8 lass *Working pressure is based on connection with roll- or cut-grooved standard wall carbon steel pipe. *Shell test, 1.5 times the working pressure, is the proof test pressure. "-1" 14"-16" 18"-30" Fabricated Nominal Pipe Max. Working Dimensions Drain Plug pprox. Size OD Pressure Size Weight mm / in mm / in bar / psi mm / in mm / in mm / in mm / in Kgs / Lb ½ ½ ½ mm ½ ½ mm mm JIS ½ ½ JIS ½ ½ JIS ½ ¼ ¼ ¼ onnect with the est! opyright 011 Shurjoint

45 715 ULLHED TEE R atalog 011 The Model 715 is a grooved-end bullhead tee, specifically designed for use on fire protection systems. The 715 allows you to directly split the flow into two reduced branch lines without the need for concentric reducers and multiple couplings. Fire Protection pplications 715 ullhead Tee Waterflow Indicator RV Riser heck Valve With Trim Kit SJ-700W utterfly Valve 7707/7705 Flexible ouplings Z07/7771 Rigid ouplings Nominal Pipe Pipe Dimensions Size O.D. - ER - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 50 x x 60.3 x x x ½.375 x.375 x x 50 x x 60.3 x x x x.375 x x 50 x x 60.3 x x x x.375 x x 65 x x 73.0 x ½ x ½ x x.875 x x 65 x x 73.0 x ½ x ½ x x.875 x x 80 x x 88.9 x x 3 x x x x 100 x x x x 4 x x x x 15 x x x x 5 x x x x 150 x x x x 6 x x 6.65 x MODEL 7150F REDUING SOKET (Gr x Ft) 7150M REDUING NIPPLE (Gr x Mt) The Shurjoint Models 7150F & 7150M are designed for making a direct reduction from a grooved system to a female or male threaded system without the need for more costly swaged nipples or adapters. 7150F 7150M L L Nominal Size 7150F 7150M Grooved x Threaded L Weight L Weight mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 40 x ½ x x x x x 1¼ x x 1½ x ½ x mm x x ½ x 1¼ mm x x ½ x 1½ mm x x ½ x mm x x x x x 1¼ x x 1½ x x x x ½ Nominal Size 7150F 7150M Grooved x Threaded L Weight L Weight mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs x 76.1mm x x 1¼ x x 1½ x x x x ½ x 76.1mm x x 1½ mm x x x 1½ mm x x x mm x x x ½ mm x x x mm x onnect with the est! opyright 011 Shurjoint

46 899 END-LL FITTING The Model 899 End-ll fitting is a unique domed end cap fitting available with a ½, ¾ or 1 NPT or SP threaded outlet. Designed as an end of line fitting, the End- ll features two multi-function bosses which can be used for the direct connection of sprinkler heads, sprigs, drops, drains and or gauges. NPT or SP Nominal Size Dimensions Grooved x Threaded a Weight mm / in mm / in mm / in Kgs / Lbs 3 x ¼ x ½ x ¼ x ¾ x ¼ x x ½ x ½ x ½ x ¾ x ½ x x x ½ x x ¾ x x x ½ x ½ x ½ x ¾ x ½ x atalog 011 MODEL 55 DPTER NIPPLE (Gr x MT) The Shurjoint Model 55 is an integral cast adapter that allows for a direct transition from a grooved system to a male threaded system or component. For other sizes see page 55, Models 57 through 59 nipples adapters. L NPT or SP Nominal Size Grooved x Threaded L Weight mm / in mm / in Kgs / Lbs 40 x 40M ½ x 1½M x 50M x M MODEL 56 HOSE NIPPLE The Shurjoint Model 56 hose nipple allows for a direct connection with rubber or plastic hoses. Material: Ductile iron STM 536 Gr and or STM 395 Gr E-E Nominal Pipe Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs ¼ ½ ½ onnect with the est! 51 opyright 011 Shurjoint

47 Sprinkler Hubs atalog 011 The Shurjoint Sprinkler Hubs are grooved-end manifold fittings with a number of threaded outlets to accommodate flexible sprinkler hoses. The Sprinkler Hubs can also be used in combination with flexible sprinkler hoses and traditional hard piping depending on your requirements. These fittings work as a hub for multiple flexible hoses and or hard pipe runs, thus reducing the number or headers, drop nipples and fittings required. ll outlets are 1 NPT or SPT. Maximum working pressure is 300 psi (0 bar,.0 MPa) WP. culus listed and FM approved. The -to-e dimensions conform to NSI 16.3 lass 150. MODEL 850 Sprinkler Hub 3 Outlets MODEL 853 Sprinkler End Hub 4 Outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 50 x 50 x 5 (3) x x 1 (3) x 65 x 5 (3) ½ x ½ x 1 (3) ( ): Number of outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 40 x 5 (4) ½ x 1 (4) x 5 (4) x 1 (4) x 5 (4) ½ x 1 (4) ( ): Number of outlets MODEL 851 Reducing Sprinkler Hub 3 Outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 50 x 40 x 5 (3) x 1½ x 1 (3) x 40 x 5 (3) ½ x 1½ x 1 (3) x 50 x 5 (3) ½ x x 1 (3) ( ): Number of outlets 5 onnect with the est! opyright 011 Shurjoint

48 7114 Hydrant ELOW atalog 011 The Model 7114 Hydrant Elbow is designed for use on fire protection systems. The small end of the elbow offers both a ½" SP threaded outlet as well as a 3" grooved connection. The boss can be factory tapped to 1" SP on request. -E ½" SP Threaded 3" Grooved oss Nominal Pipe Pipe Dimensions Size O.D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 80 x x 88.9 x x 3 x x x x 80 x x 88.9 x x 3 x x x MODEL 71 Hydrant TEE 3" Grooved ½" SP Threaded The Model 71 Hydrant Tee is designed for use on fire protection systems. The 71 tee offers both a ½" SP threaded and a 3" grooved outlet. The boss can be factory tapped to 1" SP on request. -E oss Nominal Pipe Pipe Dimensions Size O.D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 100 x x x x 4 x x x x x x x x 6 x x x MODEL 7133 PITHER TEE The Shurjoint pitcher tee provides a quick and easy connection and transition from a grooved riser system to a threaded hydrant valve outlet. The pitcher tee is designed for 3", 4" and 6" steel pipe risers with a ½" SP threaded or 3" grooved hydrant connection outlet. 3" Grooved ½ SP threaded Nominal Pipe Pip Hydrant Dimensions approx. Size O.D. Outlet Weight mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 88.9 x 88.9 x 76.1 SP x 80 x 76.1mm x x Taper x x 76.1 SP x 100 x 76.1mm x x Taper x x 76.1 SP x x 76.1mm x x Taper onnect with the est! 53 opyright 011 Shurjoint

49 WROUGHT GROOVED FITTINGS MODEL atalog 011 W ELOW, S/R W110LR 90 ELOW, L/R W111LR 45 ELOW W10 TEE W160 P Shurjoint wrought steel grooved fittings are fabricated from standard weight (0.375 or 9.5mm) carbon steel pipe to STM 34 Gr. WP, or segmentally welded with carbon steel of the same or equivalent grade. dimensions conform to NSI W110 W110LR W111LR W10 E-E W160 Nominal Pipe W S/R Elbows W110LR 90 L/R Elbows W111LR 45 L/R Elbows W10 Tee W160 ap Size O.D. Weight Weight Weight Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs MODEL W11 Reducing Tee Material: STM 34 Gr. WP, standard weight (0.375 or 9.5mm), or carbon steel of the same or equivalent grade. & - dimensions conform to NSI W11 Nominal Pipe W11 Reducing Tee Size O. D. - E - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 350 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Nominal Pipe W11 Reducing Tee Size O. D. - E - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 500 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x onnect with the est! opyright 011 Shurjoint

50 WROUGHT GROOVED FITTINGS MODEL W150 WROUGHT ONENTRI REDUER W151 WROUGHT EENTRI REDUER atalog 011 Material: STM 34 Gr. WP, standard weight (0.375 or 9.5mm), or segmentally welded carbon steel of the same or equivalent grade E-E dimensions conform to NSI E-E W150 E-E W151 MODEL 57 NIPPLE, Groove X Groove 58 NIPPLE, Groove X evel 59 NIPPLE, Groove X Thread Nominal Pipe Pipe W150 oncentric Reducer W151 Eccentric Reducer Size O.D. E-E Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 350 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Model 57 E-E Gr. x Gr. Model 58 E-E Gr. x ev. Model 59 E-E Gr. x Th Nominal Pipe 57 (Gr x Gr) 58 (Gr x ev) 59 (Gr x Th) Pipe Size O.D. E - E Weight E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ¾ ¼ ½ ½ onnect with the est! 55 opyright 011 Shurjoint

51 wrought 3d elbows MODELs L90-3D 90 L60-3D 60 L45-3D 45 L30-3D 30 L-3D ½ L11-3D 11¼ atalog Long radius 90 elbows 3D, 5D, and 6D in sizes up to and including 4 are provided with 4 (10 mm) long tangents, sizes 5 to 10 are provided with 1D long tangents and sizes 1 to 4 are provided with 1 (305mm) long tangents.. End Preparation: Roll-grooved to WW and or ISO/FDIS For dimensional tolerances of cast fittings, refer to ISO/FDIS Table 3.. Plain-end or beveled end is also available upon request. 3. Material: Standard wall steel pipe to STM 53, Grade. (Other materials available on request). 4. to E tolerances: through 6 ±1/8 (3.mm); 8 through 16 ±1/4 (6.4mm); 18 through 4 ±3/8 (9.5mm). 5. ll weights are approximate, based on calculated weight of pipe. R=3D L90-3D L60-3D L45-3D L30-3D L-3D L11-3D Nominal Pipe L90-3D 90 Elbow L60-3D 60 Elbow L45-3D 45 Elbow L30-3D 30 Elbow L-3D ½ Elbow L11-3D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ½ mm D 90 elbows ready for shipment 56 onnect with the est! opyright 011 Shurjoint

52 wrought 5d elbows MODELs L90-5D 90 L60-5D 60 L45-5D 45 L30-5D 30 L-5D ½ L11-5D 11¼ atalog 011 Nominal Pipe L90-5D 90 Elbow L60-5D 60 Elbow L45-5D 45 Elbow L30-5D 30 Elbow L-5D ½ Elbow L11-5D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ½ mm wrought 6d elbows MODELs L90-6D 90 L60-6D 60 L45-6D 45 L30-6D 30 L-6D ½ L11-6D 11¼ Nominal Pipe L90-6D 90 Elbow L60-6D 60 Elbow L45-6D 45 Elbow L30-6D 30 Elbow L-6D ½ Elbow L11-6D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ½ mm onnect with the est! 57 opyright 011 Shurjoint

53 EXTR HEVY UT GROOVEd FITTINGS "EP" (End Protection) MODEL 10EP 90 EP ELOW 11EP 45 EP ELOW 0EP EP Tee 35EP EP cross atalog 011 Shurjoint offers a variety of fittings with extra heavy (Sch. 80) wall thickness and "EP" cut grooves available for use with XH-70EP couplings. These fittings must be used with XH-70EP couplings in high pressure systems where the system pressure exceeds the published ratings for XH-1000 or Model 7707 couplings. #10EP #0EP..#11EP..#35EP Nominal Pipe #10EP 90 Elbows #11EP 45 Elbows #0EP Tee #35EP ross Size O. D. - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ½ For "EP cut-grooves, see page 6. MODEL EP HEDER TEE Shurjoint Model EP Header Tees are specifically designed for use in oilfield production headers where the top (test) line is " (50mm) and the bottom production line is 3" (80mm) or 4" (100mm). #EP Working Pressure (STD, Roll-grooved) Max. Service Temperature 750 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Fitting Size Mated to E #EP Header Tee Nominal Size Pipe O. D. - E Weight mm / in mm / in mm / in Kgs / Lbs 50 to to to to onnect with the est! opyright 011 Shurjoint

54 Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series Grooved Mechanical ouplings SS-5 Rigid oupling SS-7 Rigid oupling... 6 SS-7X Rigid oupling SS-8 Flexible oupling SS-8X Heavy Duty Flexible oupling SS-100 High Pressure Flexible oupling SS-8 Hinged Lever oupling ast Grooved Fittings SS-10 / SS-11 / SS-0 / SS-60 Elbows, Tee, ap SS-1 / SS 50 Reducing Tee, oncentric Reducer Wrought Grooved Fittings WS-10 / WS-10L / WS-11 / WS-0 / WS -60 / WS-1 / WS-50 Elbows, Tee, ap, Reducing Tee & oncentric Reducer...70 Flange dapters SS-41 / SS-80 Flange dapters Mechanical Tee, Y-Strainer & Valves SS-73 / SS-76 Mechanical Tee, Y Strainer... 7 SJ-600L / SJ-600W all Valves SJ-400-L / SJ-400-W utterfly Valve onnect with the est! atalog 011

55 Stainless Steel Series atalog 011 Shurjoint offers a full range of stainless steel grooved mechanical couplings in F8 (304) and F8M (316) for general service applications and in specialty alloys for applications including reverse osmosis and desalination systems. Grooved fittings are available in sizes from 1 (5 mm) to 4 (600 mm) produced in a combination of investment castings and wrought stainless. The design pressure rating of Shurjoint stainless steel grooved couplings follows lass 150 and is based on roll grooved Sch. 40S pipe. Pressure ratings will vary depending on the type of pipe used and grooves processed. For example; for cut grooved Sch. 40S pipe - apply 110%, for roll grooved Sch.10S pipe - apply 80% and for rollgrooved Sch. 5S pipe - apply 50%. Shurjoint Model SS-100 and Model SS-8X are designed for high pressure applications for use with cut-grooved Sch. 40S and or Sch. 80S pipe with pressures expressed in WP. Shurjoint ductile iron couplings can be used in conjunction with stainless steel pipe, depending on the application, as the flow media does not come in direct contact with coupling housings but rather only the gasket. See page 39 for performance data. Stainless steel pipe in general is more difficult to groove than carbon steel pipe, as it is more difficult to achieve defined groove corners on stainless pipe. Grooves that are not defined and have too much of a radius could result in joint failure. are must be taken to process grooves as defined as possible. For this reason, roll-groove machine manufacturers offer a variety of roll sets depending on the pipe material and wall thickness being grooved. lways select the correct roll set for the pipe being grooved. Groove corners are not defined OK If the same roll-set that has been used for carbon steel pipe is used on stainless steel pipe, rust or scale may be transferred to the stainless steel pipe during processing of the groove. Thus we recommend the use of a separate roll set specifically for use with stainless steel pipe. lso use caution to keep roll grooved stainless steel pipe dry prior to installation. Stainless Steel asting Specifications ustenitic Stainless Steel Duplex (ustenitic / Ferritic) Stainless Steel Grade F8 F8M K3MuN, E8MN 4, D3MN 5, E3MN (UNS) J9600 J9900 J9354 J93345 J905 J93404 omposition, % (max, except where range is given) arbon Manganese Silicon Sulfur Phosphorus hromium Nickel Molybdenum Nitrogen opper Tensile Requirements, min. Tensile Strength, ksi (MPa) 70 (485) 70 (485) 80 (550) 95 (655) 90 (60) 100 (690) Yield Strength, ksi (MPa) 30 (05) 30 (05) 38 (60) 65 (450) 60 (415) 75 (515) Elongation, % STM Standards 351/ 743/ /743/ /743/ / Wrought Equivalent Grade SMO* 45D* 05 SF 507* * 54SMO is a registered trademark of vestapolarit, 45D is a registered trademark of ESO orporation and SF 507 is a registered trademark of Sandvik Steel.. 60 onnect with the est! opyright 011 Shurjoint

56 SS-5 RIGID OUPLING - ngle-pad Design - atalog 011 The Shurjoint Model SS-5 is an angle-pad design stainless steel coupling for use with Sch. 5S, Sch. 10S or Sch. 40S stainless steel pipe where a rigid connection is desired. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so called snaking of a long straight run. With the removal of only one bolt you can make a fast and easy "swingover installation. The SS-5 couplings are comprised of two identical F8 (304) or F8M (316) housing segments, EPDM gaskets and stainless steel track bolts and heavy duty nuts. The Shurjoint Model SS-5 is available with a standard shaped or GapSeal gasket in a variety of grades to meet your specific service requirements. Working Pressure Max. Service (STD, Roll-Grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Max. End xial Dimensions olts Size Size O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs ~ M10 x ¼ ~ ⅜ x ⅛ ~ M10 x ½ ~ ⅜ x ⅛ ~ M10 x ~ ⅜ x ¾ ~ M10 x ½ ~ ⅜ x ¾ ~ M10 x mm ~ ⅜ x ¾ ~ M10 x ~ ⅜ x ¾ ~ M10 x ~ ⅜ x ¾ ~ M1 x mm ~ ½ x ~ M1 x ~ ½ x ~ M1 x mm ~ ½ x ~ M1 x ~ ½ x ~ M16 x ~ ⅝ x 5 5/ ~ M0 x JIS ~ ¾ x 4¾ 16. onnect with the est! 61 opyright 011 Shurjoint

57 SS-7 STINLESS STEEL Rigid oupling atalog 011 The Model SS-7 is a tongue and groove rigid coupling designed for a variety of moderate service pressure applications. The SS-7 is supplied standard in F8 (304) and F8M (316) with 304 and 316 bolts and nuts. SS-7 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Pipe End Dimensions olt Size O. D. Separation Size Weight mm / in mm / in mm / in mm / in mm / in mm / in in Kgs / Lbs ⅜ x 1¼ ⅜ x 1½ ⅜ x ⅜ x ½ mm ⅜ x ⅜ x ½ x mm ½ x ½ x mm ½ x ½ x ⅝ x 3½ JIS ⅝ x 3½ The tongue and groove style rigid coupling may allow for rotation when installed on undersized grooves. Domestic Water Service 6 onnect with the est! opyright 011 Shurjoint

58 SS-7X STINLESS STEEL Rigid oupling atalog 011 The Model SS-7X is a tongue and groove rigid coupling designed to provide a rigid joint for stainless steel pipe in sizes 10 through 4. The SS-7X is supplied standard in F8 (304) and F8M (316) with 304 and 316 bolts and nuts. The bolts must be fastened to the required torque for proper installation. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum times the working pressure. 10" ~ 14" 16" ~ 18" 0" ~ 4" Nominal Pipe Pipe End Dimensions olt olt Size O. D. Separation Size Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in No. in N-m / Lbs-Ft Kgs / Lbs ⅞ x 6½ ⅞ x 6½ JIS ⅞ x 6½ JIS ⅞ x 6½ ⅞ x 6½ ⅞ x 3½ ⅞ x 3½ ¾ x 4¾ ¾ x 4¾ ¾ x 4¾ ir onditioning onnect with the est! 63 opyright 011 Shurjoint

59 SS-8 STINLESS STEEL Flexible oupling atalog 011 The Model SS-8 is a flexible coupling designed for a variety of general service and specialty applications. The SS-8 is supplied standard in F8 (304) and F8M (316) with 304 or 316 bolts and nuts. SS-8 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Pipe End Dimensions Deflection olt Size O. D. Separation Degree Size Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) in Kgs / Lbs /16 x1½ /16 x1½ 1¼ /16 x1½ 1½ ⅜ x ⅜ x ½ mm 1-1 ⅜ x ⅜ x ½ x mm 1-18 ½ x ½ x mm 1-07 ½ x ½ x ⅝ x 3½ JIS 0-51 ⅝ x 3½ onnect with the est! opyright 011 Shurjoint

60 SS-8X Stainless Steel Heavy Duty Flexible oupling atalog 011 The Model SS-8X is designed for high pressure applications including reverse osmosis and desalination systems. The SS-8X is available in Duplex D3MN (05), Super Duplex E8MN, E3MN (507) and 6-Moly stainless steel K3MuN (54SMO*). The SS-8X features 316 bolts, washers and Silicon ronze nuts to help prevent galling during repetitive use. The SS-8X is also available in F8M (316) with 316 bolts and nuts. ontact Shurjoint for details. Size Working Pressure Test Pressure Max. Service (S40S, ut-grooved) (Hydrostatic) Temperature 3/4 4 WP 1400 F 100 psi ar EPDM: 30 F / WP 1000 F 1500 psi Nitrile: 180 F / MPa *Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *urst pressure is engineered minimum times the working pressure.s Nominal Pipe Pipe End Dimensions Deflection olt Size O. D. Separation Degree Size Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) in Kgs / Lbs ⅜ x ¾ ⅜ x ⅜ x 1¼ ⅜ x 1½ ⅜ x ⅜ x ½ ½ x ½ x ⅝ x 3½ ⅝ x 3½ ¾ x 4¾ JIS 0-51 ¾ x 4¾ Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with SME Section VIII Division 1 pressure vessel test methods. Reverse osmosis plant onnect with the est! 65 opyright 011 Shurjoint

61 SS-100 Stainless Steel High Pressure Flexible oupling atalog 011 The Model SS-100 is designed for high pressure applications including reverse osmosis, desalination and other specialty systems. The SS-100 is available in strong and anti-corrosive alloys of Duplex D3MN (05), Super Duplex E8MN, E3MN (507) and 6-Moly stainless steel K3MuN (54SMO*). The SS-100 features 316 bolts, washers and Silicon ronze nuts to help prevent galling during repetitive use. Working Pressure Test Pressure Max. Service (S40S, ut- or Roll-grooved) (Hydrostatic) Temperature 100 F 1800 psi EPDM: 30 F / 110 WP ar Nitrile: 180 F / 8 *Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *urst pressure is engineered minimum times the working pressure. Nominal Pipe Pipe End Dimensions Deflection olt Size Size O. D. Separation Degree Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) No. in Kgs / Lbs ⅜ x ¾ ⅜ x ⅜ x 1¼ ⅜ x 1½ ½ x ½ x 3 ½ ½ x ⅝ x 3½ Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with SME Section VIII Division 1 pressure vessel test methods. The Shurjoint Fast-Fit gasket has been designed and engineered for easier and faster installations. The pipe-end friendly design eliminates struggling to stretch the gasket over the pipe ends and the Fast-Fit gasket also features Shurjoint s Gap-Seal technology, which seals the gap between the pipe ends and eliminates stagnant water pockets within the gasket cavity. The Fast- Fit gasket is UL classified in accordance with NSI/NSF 61 for potable water (old Water +86 F / 30 and Hot Water +180 F / +8 ). lways use the factory supplied Shurjoint Fast-Fit gasket. Performance standards do not support the use of a standard gasket in the SS-100 coupling. Fast-Fit Gasket: Easy installation with a single hand * 54SMO is a registered trademark of vestapolarit. lways use the Shurjoint Fast-fit gasket. Don't use a standard gasket with the SS- 100 coupling. 66 onnect with the est! opyright 011 Shurjoint

62 SS-8 Stainless Steel HINGED LEVER OUPLING atalog 011 The Model SS-8 Hinged Grooved oupling is designed for quick connect and disconnect services. The housing segments are hinged with a lever handle for easy assembly. Use of the split pin can prevent the accidental opening of the coupling. The Model SS-8 can be used in a wide variety of applications with standard roll- or cut- grooved pipe. Housings 40mm - 100mm (1½ - 4 ) feature a smooth outer surface, housings 15mm - 300mm (5-1 ) feature a cross-ribbed design for added strength. Standard gasket: Grade E EPDM or Grade T Nitrile. vailable standard in F8 (304) or F8M (316). Working Pressure Max. Service (STD, Roll-Grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 *The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. split pin Nominal Pipe Max. Working xial Dimensions Deflection Size O. D. Pressure Displacement Degree Weight mm / in mm / in ar / PSI mm / in mm / in mm / in mm / in ( ) Kgs / Lbs º - 48' 1½ º - 31' º - 30' ½ mm º - 4' º - 4' º - 1' º - 37' º - 36' mm º - 14' º - 10' *Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. Expansion Pipe Lever handles are factory assembled tight for safety. The use of an expansion pipe will aid the easy opening and closing. Expansion pipes are available upon request. onnect with the est! 67 opyright 011 Shurjoint

63 ST GROOVED FITTINGS MODEL SS ELOW SS ELOW MODEL SS-0 TEE SS-60 P atalog 011 The Shurjoint Model SS-10, SS-11, SS-0 and SS-60 stainless steel grooved fittings are investment cast in sizes 1" - 1". These fittings are supplied in STM 351 or 743 austenitic grades F8 (304) and F8M (316). In addition fittings are also available on request in F3M (316L), 316Ti, 05 Duplex, 507 Super Duplex and STM K-3MuN (UNS J9345) the cast equivalent to 54SMO * to meet your specific service requirements. ll cast fittings feature full flow characteristics and are designed to the same - E dimensions of standard ductile iron grooved fittings. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature F lass EPDM: 30 F / F Nitrile: 180 F / 8 lass The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. E-E E-E Nominal Pipe SS Elbow SS Elbow SS-0 Tee SS-60 ap Size O. D. - E Weight - E Weight - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs ¼ ½ ½ mm mm mm JIS JIS JIS *54SMO is a registered trademark of vesta Polarit. 68 onnect with the est! opyright 011 Shurjoint

64 SS-1 REDUING TEE MODEL SS-50 ONENTRI REDUER atalog 011 The Shurjoint Model SS-1 and SS-50 stainless steel fittings are investment cast in sizes to 8" and sand cast or wrought in sizes 10"-4". - E-E Nominal Pipe SS-1 Reducing Tee SS-50 oncentric Reducer Size O. D. - Weight E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 40 x x ½x x x x ½ x 1¼ x x x x x x x x 1¼.375 x x x x 1½.375 x x x ½ x x x x ½ x 1½.875 x x x ½x 1½.875 x x x ½ x.875 x x mm x x x mm x x x mm x x x mm x x x x x 1½ x x x x 1½ x x x x x x x x ½ x x x 76.1mm x x x x x x x x ½ x x x 76.1mm x x x x x Nominal Pipe SS-1 Reducing Tee SS-50 oncentric Reducer Size O. D. - Weight E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 15 x x x x x x x x x mm x x x mm x x mm x x 139.7mm x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x JIS x x x JIS x x JIS 16.3 x x 165.1mm x JIS 67.4 x x 165.1mm x JIS 67.4 x x 00 JIS x JIS x x 00 JIS x JIS x x 50 JIS x onnect with the est! 69 opyright 011 Shurjoint

65 WROUGHT STINLESS STEEL FITTINGS atalog 011 MODEL WS ELOW, S/R WS-10L 90 ELOW, L/R WS ELOW, L/R WS-0 EQUL TEE WS-60 P Shurjoint wrought stainless steel grooved fittings are fabricated from Sch. 10S E-E stainless steel pipe to STM 403 WP-S 304 or 316, or welded pipe or plate WP-W. dimensions conform to NSI 16.9 and WS-10 WS-10L WS-11 WS-0 WS-60 Nominal Pipe WS-10 WS-10L WS-11 WS-0 WS-60 Size O.D. Weight Weight Weight Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs MODEL WS-1 REDUING TEE Material: STM 403 WP-S 304 or 316 Wall thickness: Sch. 10S & - dimensions: NSI 16.9 & WS-1 MODEL WS-50 oncentric Reducer Material: STM 403 WP-S 304 or 316 Wall thickness: Sch. 10S E-E dimensions: NSI 16.9 & 16.8 E-E WS-50 Nominal Pipe Pipe WS-1 Reducing Tee Size O.D. - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 350 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Nominal Pipe Pipe WS-50 oncentric Reducer Size O.D. E-E Weight mm / in mm / in mm / in Kgs / Lbs 350 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x onnect with the est! opyright 011 Shurjoint

66 SS-41 FLNGE DPTER - NSI 15/150 atalog 011 The Model SS-41 stainless steel flange adapter allows for a direct connection with NSI lass 15/150 flanges. The SS-41 is investment cast in Gr. F8 (304) or F8M Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. (316). Integral closure tabs located on the flange OD help facilitate alignment and assembly. D E Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size. Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs ⅝ x ⅝ x 3 ½ ⅝ x ⅝ x ¾ x 3½ ¾ x 3½ * ased on Sch. 10S pipe. MODEL SS-80 STINLESS STEEL Universal Flange dapter The Model SS-80 Universal Flange dapter provides for a rigid transition between a grooved piping system and a flanged piping system or component. The SS-80 can mate to NSI 15/150, PN 10/16, S-10E or JIS 10K, and is available standard in F8 (304) or F8M (316). Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. X Y Z L D Nominal Pipe O. D. Y: Flange Drilling olt Size asic NSI 15 / 150 PN 10, 16 JIS 10K Z Size Weight mm / in mm / in L X mm / in mm / in mm / in mm / in mm / in No. Kgs / Lbs M ⅝ M ½ ⅝ M mm ⅝ M ⅝ M ⅝ M16 / M mm ⅝ / ¾ M16 / M ⅝ / ¾ M mm ¾ M ¾ M0 8 / N/ ¾ 8 / M0 8 / JIS N/ ¾ 8 / ontact Shurjoint for other sizes. onnect with the est! 71 opyright 011 Shurjoint

67 SS-73 STINLESS STEEL MEHNIL TEE atalog 011 The Shurjoint Model SS-73 stainless steel mechanical tee is the ideal fitting for branch or direct outlet connections to sprinkler heads, drop nipples and or gauges on stainless steel pipe. No need for welding, simply cut or drill a hole at the desired location, position the housing so that the locating collar fits within the hole and secure with the bolts and nuts. D Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on Sch. 40S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. T Nominal Hole Dia. Dimensions olt Size +1.6, -0 / , -0 D T* Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in in Kgs / Lbs 3 x /16 x 1½ 1¼ x ½ x /16 x 1½ 1¼ x ¾ x /16 x 1½ 1¼ x x /16 x 1½ 1½ x ½ x /16 x 1½ 1½ x ¾ x /16 x 1½ 1½ x x /16 x 1½ x ½ x /16 x 1½ x ¾ x /16 x 1½ x T*: Take-out (enter of run to end of pipe to be engaged) MODEL SS-76 STINLESS STEEL Y-STRINER The Model SS-76 Stainless Steel Groovedend Y-Strainers are designed to strain debris and foreign matter from piping systems and thus provide inexpensive protection for costly pumps, meters and other components. leaning and maintenance of the screen can be accomplished easily by removing the coupling. The Model SS-76 Stainless Steel Y-Strainer is suitable for vertical or horizontal installations. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Dimensions Drain Plug Size OD Pressure Size Weight mm / in mm / in bar / psi mm / in mm / in mm / in mm / in Kgs / Lb ½ ½ ½ onnect with the est! opyright 011 Shurjoint

68 SJ-600L all Valve atalog 011 The Model SJ-600L is a two-piece, full-port stainless steel ball valve rated at 600 psi (40 bar) and is available in F8M (316). The SJ-600L features a floating ball for lower torque and is supplied with a lever handle as well as ISO mounting holes to accommodate a full range of gear or power actuators. Working Pressure Shell Test Max. Service (S40S, Roll-Grooved) (Hydrostatic) Temperature 600 F 900 psi EPDM: 30 F / 110 WP ar Nitrile: 180 F / 8 *Working pressure is for connection with cut- or roll-grooved schedule Sch. 40S pipe. *Seat test: 110% the working pressure. W Size: 4" H d L Size: 1½" - 3" Nominal Pipe Operating Dimensions pprox. Size OD Torque L H W d Weight mm / in mm / in Lb - in / N - m mm / in mm / in mm / in mm / in Kgs / Lbs ½ ½ mm * The weight includes the lever handle. MODEL SJ-600W all Valve W The Model SJ-600W is supplied with a worm gear operator. The standard gear operator is supplied with a bracket and extension sleeve. Sizes available are "/50mm through 4"/100mm. K H Nominal Pipe Dimensions pprox. Size OD K H W Weight mm / in mm / in mm / in mm / in mm / in Kgs / Lbs ½ mm * The weight includes the worm gear operator. onnect with the est! 73 opyright 011 Shurjoint

69 SJ-400 UTTERFLY VLVE atalog 011 The Shurjoint Model SJ-400 utterfly Valve is a grooved end stainless steel butterfly valve, supplied with a 10 position lever handle (SJ-400-L) or worm gear operator (SJ-400-W). The body is available in F8M (type 316) to STM 743 with integral neck and ISO 511 mounting pad. It features a dual seal disc encapsulated with Gr. E EPDM for cold and hot water services. The end-toend dimensions conform to MSS SP-67. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 F EPDM: 30 F / 110 lass Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Seat test: 110% the working pressure. Shell test: 1.5 times the working pressure. SJ-400-W 14-4 E E SJ-400-L -1 F D D O. D. O. D. SJ-400-W Nominal Pipe Dimensions Operating Size O. D. D E Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in N-m / In - Lb Kgs / Lbs ½ mm mm JIS * The weight includes the lever handle or worm gear operator. 74 onnect with the est! opyright 011 Shurjoint

Model 7706 Reducing Coupling. Deg. Axial Displacement

Model 7706 Reducing Coupling. Deg. Axial Displacement MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents

More information

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.

Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings. Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...

More information

Valves & Flow Control Components Valves & Flow Control Components

Valves & Flow Control Components Valves & Flow Control Components Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110

More information

SEE VICTAULIC PUBLICATION FOR DETAILS

SEE VICTAULIC PUBLICATION FOR DETAILS dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table

More information

INTRODUCTION. General Notes

INTRODUCTION. General Notes INTRODUCTION Thank you for selecting a Shurjoint product. This manual covers the proper installation and assembly procedures for your product. To ensure the proper installation, assembly and performance

More information

B U I L D I N G C O N N E C T I O N S T H AT L A S T

B U I L D I N G C O N N E C T I O N S T H AT L A S T B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior

More information

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female

More information

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,

More information

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle

SJ-300N J-04. Model SJ-300N-L Butterfly Valve with Lever Handle SJ-300N J-04 MODEL SJ-300N BUTTERFLY VALVE The Model SJ-300N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a

More information

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS

QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket

More information

COOPLOK Grooved Submittal. Material Specifications

COOPLOK Grooved Submittal. Material Specifications SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:

More information

STAINLESS STEEL SYSTEMS

STAINLESS STEEL SYSTEMS STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings

More information

Section 8. Copper Series

Section 8. Copper Series Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for

More information

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications 82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

More information

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date

Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications

More information

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)

Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.) SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique

More information

08.20 VIC -300 MasterSeal Butterfly Valves

08.20 VIC -300 MasterSeal Butterfly Valves CRBON STEEL PIPE - GROOVED VLVES Vic -300 MasterSeal butterfly valves are designed for pressures ranging from full vacuum to 300 psi/2065 kpa and for bi-directional, dead end services to full working pressure.

More information

INTEGRATED PIPING SYSTEMS. Technical manual. Fire Protection

INTEGRATED PIPING SYSTEMS. Technical manual. Fire Protection INTEGRATED PIPING SYSTEMS Technical manual Fire Protection Disclaimer: This technical data is non-binding and may not reflect the guaranteed characteristics of the products, which are subject to change.

More information

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings

Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130

More information

Advantages of Grooved Fittings

Advantages of Grooved Fittings Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

More information

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in.

SJ-300N. Model SJ-300N-L Butterfly Valve with Lever Handle Max. Working Pressure (CWP)* PSI Bar Dimensions A B C D E in. SJ-N MODEL SJ-N BUTTERFLY VALVE The Model SJ-N Butterfly Valve is a grooved-end tight shut-off valve designed, manufactured and tested to MSS SP-67. The valve can be shipped either with a -position lever

More information

Size Inches UL ULC FM. Pipe Sch.

Size Inches UL ULC FM. Pipe Sch. IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design

More information

Vic -300 Butterfly Valves

Vic -300 Butterfly Valves R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).

More information

SCOPE OF WORK WASTEWATER TREATMENT PLANT THE WORLD LEADER IN PIPE JOINING SOLUTIONS

SCOPE OF WORK WASTEWATER TREATMENT PLANT THE WORLD LEADER IN PIPE JOINING SOLUTIONS SCOPE OF WORK WASTEWATER TREATMENT PLANT THE WORLD LEADER IN PIPE JOINING SOLUTIONS THE VICTAULIC DIFFERENCE HOUSING GROOVE GASKET BOLT/NUT GROOVE GROOVED PIPE JOINING TECHNOLOGY How does it work? The

More information

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)

Stainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C) The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless

More information

Grooved Piping Products

Grooved Piping Products 2 Grooved Piping Products Tyco Fire Products is ISO 9001 Certified with products manufactured in our newly constructed state of the art domestic ductile iron foundry and manufacturing facilities. We are

More information

Style Flange Adapter

Style Flange Adapter Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved

More information

Ductile Iron Pipe Fittings

Ductile Iron Pipe Fittings 0 JTPR R FM UR ISTED 02 JTPR R FM UR ISTED Qualifications 0 JTPR R FM U R ISTED 0 JTPR R FM UR ISTED Products show Rigid Coupling Flexible Coupling Mechanical Tee Grooved outlet Mechanical Tee Threaded

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

Pressfit System for Carbon Steel Pipe

Pressfit System for Carbon Steel Pipe R PRESSFIT SYSTEM FOR ARBON STEEL PIPE Pressfit System for arbon Steel Pipe 12.02 VITALI IS AN ISO 9001 ERTIFIED OMPANY PRODT DESRIPTION L FM L See Victaulic publication 10.01 for details. The Pressfit

More information

REQUEST PUBLICATION 18.11

REQUEST PUBLICATION 18.11 * SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/

More information

Style 99 Roust-A-Bout Couplings

Style 99 Roust-A-Bout Couplings R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings

More information

Pipe Hangers. 47 B-Line series Pipe Hangers & Supports

Pipe Hangers. 47 B-Line series Pipe Hangers & Supports Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable

More information

FIG Gruvlok Flanges

FIG Gruvlok Flanges Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the

More information

Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports

Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable

More information

Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81

Approved. Size L H. 3 (76mm) 9-1/2 (241mm) 5-51/64 (147mm) 46. 4 (102mm) 11-1/2 (292mm) 6-45/64 (170mm) 81 pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550

More information

Product Submittals for Project

Product Submittals for Project Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building

More information

GROOVED FITTINGS FOR COPPER TUBING

GROOVED FITTINGS FOR COPPER TUBING GROOVED FITTINGS FOR COPPER TUBING Shurjoint Grooved-end fittings are produced from bronze castings. Bronze castings are produced from lead-free alloys C90500 and or C89836* Bismuth copper alloy per ASTM

More information

FIG Gruvlok Flange Adapter

FIG Gruvlok Flange Adapter FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method

More information

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101

GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses

More information

INTEGRATED PIPING SYSTEMS. Technical manual. VSH Shurjoint

INTEGRATED PIPING SYSTEMS. Technical manual. VSH Shurjoint INTEGRATED PIPING SYSTEMS Technical manual VSH Shurjoint Disclaimer: The technical data are non-binding and do not reflect the warranted characteristics of the products. They are subject to change. Please

More information

11.02 Mechanical-T Bolted Branch Outlets

11.02 Mechanical-T Bolted Branch Outlets STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products

MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly

More information

229 B-Line series Pipe Hangers & Supports

229 B-Line series Pipe Hangers & Supports accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged

More information

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.

More information

Technical manual. VSH Shurjoint

Technical manual. VSH Shurjoint Technical manual VSH Shurjoint Disclaimer: The technical data are non-binding and do not reflect the warranted characteristics of the products. They are subject to change. Please consult our General Terms

More information

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient

More information

STAINLESS STEEL FITTINGS

STAINLESS STEEL FITTINGS nvilpress Stainless Steel Fittings provide a complete line of mechanically joined press-fittings in sizes 1 /2 through 2 inches. These fittings are designed to work with Schedule 5 or 10 Stainless Steel

More information

08.12 Vic-Plug Balancing Valve

08.12 Vic-Plug Balancing Valve Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available

More information

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730

Vic-Strainer WARNING. System No. Submitted By Spec Sect Para Location Date Approved Date IPS CARBON STEEL PIPE - GROOVED ACCESSORIES SERIES 730 Series 730 Vic-Strainer is lighter than flanged Y type strainers and provides straightthrough flow for lower pressure drop. It installs with two Victaulic couplings, and is rated up to 750 psi/5175 kpa

More information

Style 233-L & 234-L Rubber Joints

Style 233-L & 234-L Rubber Joints Style 33-L & 3-L Rubber Joints Style 33-L Rubber s are designed for piping systems that experience large lateral offsets due to settlement. The Style 33-L is a low profile triple arch design with a built-in

More information

IDF / ISS Hygienic Union BS 4825 Part 4

IDF / ISS Hygienic Union BS 4825 Part 4 IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred

More information

Standard Product Range

Standard Product Range Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer

More information

THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS

THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally

More information

COMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal.

COMPRESSION COUPLINGS Exclusive Design Features Outer Shell and Bar Washer The unique design provides an equalized pressure seal. 1-800--1 The only economical couplings available to connect (or repair) threaded or unthreaded pipe or tubing of any size f rom 1/ thru including metric sizes and a rare oneof-a-kind size tubing. COMPRESSION

More information

Smith-Blair OMNI Coupling System Advantages:

Smith-Blair OMNI Coupling System Advantages: OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

Tubing, Fittings and Air Handling System Components

Tubing, Fittings and Air Handling System Components Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Cable & Wire Management

Cable & Wire Management able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...

More information

FIRE PROTECTION PRODUCTS

FIRE PROTECTION PRODUCTS FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.

More information

FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME.

FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. DATA SHEET INDEX 36m x 19mm FIRE HOSE REEL RISER INSTALLATION DETAIL

More information

SMS Swedish Standard Union

SMS Swedish Standard Union SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework

More information

Grooved Fire Protection. Installation Handbook

Grooved Fire Protection. Installation Handbook Grooved Fire Protection Installation Handbook October 2016 Grooved Fire Protection Installation Handbook OCTOBER 2016 IH-1000FP Worldwide Contacts www.tyco-fire.com GLOBAL HEADQUARTERS 1400 Pennbrook

More information

GP 300 Grooved Butterfly Valve

GP 300 Grooved Butterfly Valve GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item

More information

Vic -300 Butterfly Valves

Vic -300 Butterfly Valves R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.02 VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa).

More information

5. STRAUB-FLEX / STRAUB-REP

5. STRAUB-FLEX / STRAUB-REP 5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

Series W709 AGS Butterfly Valves (175 psi/1270 kpa)

Series W709 AGS Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)

More information

Steel Fabricated Coupling

Steel Fabricated Coupling Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection

More information

Welded Outlet Fittings For Fire Protection & Other Low Pressure Piping Systems

Welded Outlet Fittings For Fire Protection & Other Low Pressure Piping Systems Welded Fittings For Fire Protection & Other Low Pressure Piping Systems SPF Welded Fittings offer the user a high strength, low cost forged threaded and grooved line of fittings specifically designed and

More information

Pipe/Conduit Clamps & Hangers

Pipe/Conduit Clamps & Hangers Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories

More information

Manufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;

Manufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations; Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

Lenntech Tel Fax

Lenntech  Tel Fax SEE VICTAULIC PUBLICATIO.01 FOR DETAILS Style 99 Roust-A-Bout couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule steel

More information

CAST IRON THREADED FITTINGS

CAST IRON THREADED FITTINGS q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6

More information

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings

More information

Flowline Products and Services World Proven Chiksan and Weco Equipment.

Flowline Products and Services World Proven Chiksan and Weco Equipment. Flowline Products and Services World Proven hiksan and Weco Equipment http://www.fmctechnologies.com Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design

More information

Pipe Fittings & Steel Nipples

Pipe Fittings & Steel Nipples Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:

MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number: ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP

More information

KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids

KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of

More information

Mechanical Piping Products

Mechanical Piping Products October 202 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com. Mechanical Piping Products b u i l d i n g c o n n e c t i o n s t h a t l

More information

Series 1 Steel - Straight Sections

Series 1 Steel - Straight Sections LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that

More information

Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only

Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only Victaulic Suction Vibration Isolation Pump Drop Series 337 Korea Only 2.37 1.0 PRODUCT DESCRIPTION Available Sizes 3 12"/DN80 DN300 Maimum Working Pressure Rated to the working pressure of the PN/PN16

More information

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)

Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)

More information

3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections

3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek

More information

Fiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m)

Fiberglass Basins with Ballast Support Flange 24 thru 72 Dia. (.6m thru 1.8m) Specifications: Fiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m) Standard: Basin construction is custom molded fi berglass reinforced polyester resin. The wall thickness

More information

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are

More information

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator

Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are

More information

MATERIALS. Polypropylene

MATERIALS. Polypropylene 68509.verB_1_3.P1.fh 4/17/07 12:15 PM Page 1 THERMOPLASTIC INDUSTRIAL PIPING SYSTEMS Asahi/America thermoplastic piping systems are designed for tough industrial applications. With our partner Agru of

More information

Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F

Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,

More information

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

2- 20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2"- 20" (50mm-500mm) CELEBRATING Y E A R S The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions

MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions MaxiFit Overview A Versatile Solution

More information

Series 709 Butterfly Valves (175 psi/1270 kpa)

Series 709 Butterfly Valves (175 psi/1270 kpa) IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers

More information