Turbo II Air Hydraulic Pumps. Setting New Standards.

Transcription

1 Turbo II Hydraulic Pumps Shown left to right: PMG142N, PTG2N, PRG2N, PTG5N Setting New Standards High efficiency cast aluminum air motor for increased life and reduced air consumption Fully serviceable air motor assembly Reinforced heavyduty reservoir for applications in tough environments New generation air saver piston with rugged onepiece design reduces air consumption and operating costs Returntotank port for use in remote valve applications Quiet only 76 db with low air consumption of 12 scfm Operating air pressure: psi, enables pump to start at extremely low pressure Internal pressure relief valve provides overload protection RFL12 RegulatorFilterLubricator Recommended for use with all air pumps. Provides clean, lubricated air and allows for air pressure adjustment. Steel bowl guards are standard. Large Reservoir s The Turbo II Pump is also available with a larger reservoir: PTG5N, PMG145N, and PRG5N. Hoses Enerpac offers a complete line of highquality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses. Page: 116 Easily operated by hand or by foot. with ylinder Oil apacity 4 oubleacting (in 3 ) PTG2N* PTG5N PRG2N PRG5N PMG142N PMG145N * vailable as set. See note on next page.

2 Turbo II Hydraulic Pumps The PTGmodels use a foot or hand operated treadle to control air and valve functions. The PMGmodels use a treadle with a locking feature and a 4way manual valve. The PRGmodels use a 15 ft. pendant hose for convenient one man operation. Oil flow (in3/min) FLOW HRT Turbo II Pump (@ 1 psi) PTG and PMG models PRG models 2) P Reservoir apacity: 1535 in3 Flow at Rated : 1 in3/min. Maximum Operating : psi Rating Output Flow Rate (in 3/ min) No load ) 4 2) Load 1 6 1) 5 2) PTG & PMG PRG Function dvance/ Hold/ Retract 1) supply connected at pendant. 2) supply connected at pump shown on flow curve. Range onsumption (db) Pump and ylinder TURBOII Sets Turbo II pumps are also available as sets (Turbo II pump, cylinder, gauge, couplers and hose) for your ordering convenience. Page: 5 M M RELESE PRESS E B F E B B E Filtered Permanent Tank Vent H 3 /"1NPTF K 3 /"1NPTF 1 /4"1NPTF PTG2N and PTG5N L J H K 3 /"1NPTF 1 /4"1NPTF 3 /"1NPTF 3 /"1NPTF PMG142N and PMG145N L J H K 3 /"1NPTF 1 /4"1NPTF PRG2N and PRG5N L 1 /4"1NPTF ReturntoTank/uxiliary Vent/Fill Tank Port Hydraulic Output Swivel Input with Filter 4 Mounting Holes for #1 thread forming screw. Max.depth into reservoir =.75" Input imensions (in) B E F H J K L M PTG2N* PTG5N PRG2N PRG5N PMG142N PMG145N 5

3 Hydraulic Pumps Shown from top to bottom: P115, P133 P Reservoir apacity: 36 in3 Flow at Rated : in3/min. Maximum Operating : psi P66 Reservoir onversion Kit ouble the reservoir capacity of your existing P133 with this easy to install conversion kit. Rugged construction built for long life and easy service Swivel coupling simplifies hydraulic connection and pump operation Threeposition treadle provides cylinder advance, hold and retract operation P133 operates in all positions for increased versatility in use and mounting Base mounting slots provided on P133 Oil flow (in3/min) FLOW HRT pressure: P (@ 1 psi) Input 1/4"1NPTF P133 Hydraulic Output 3/"1NPTF 14.6 ø.34 (4x) Fill Tank Port ø /2"2UNF Fill Tank Port /4"1NPTF Input /"1NPTF P115 3/"1NPTF Hydraulic Output imensions shown in inches with ylinder onsumption Oil apacity (in 3 ) 36 P133 P115 Rating Output Flow Rate No load 4 4 * Recommended RegulatorFilterLubricator: RFL12 (in 3 /min) Load Function dvance/hold/retract dvance/hold/retract Range* (db)

4 Hydraulic Pumps Shown: PM141 PM Reservoir apacity: 1.2. gal. Flow at Rated : in3/min. Maximum Operating : psi Locking s Pumps with VM4 manual valves are available with VM4L manual locking valves instead. dd suffix L to pump model number. Page: 13 Twin air motor configuration delivers highflow performance in first stage, up to 2 psi, for rapid cylinder advance 1 and 2 gallon reservoirs for use with a wide range of cylinders Integral shroud protects air motors and provides easy portability 1. Gallon 2. Gallon 3 /"1NPTF Hydraulic Output On/Off Oil flow (in3/min) V2 Remote For remote operation of PM1 series air pumps. Permits either hand or foot operation. FLOW HRT /4"1NPTF Input PM (@ 1 psi) with ylinder oubleacting Oil apacity (gal) (with Shroud) PM121 PM122 PM141 PM142 Rating Output Flow Rate (in 3/ min) 1 st stage 2 nd stage Function dv/hold/ret dv/hold/ret dv/hold/ret dv/hold/ret VM2 VM2 VM4 VM4 Range* onsumption (db) * Recommended RegulatorFilterLubricator: RFL12 7

5 Z Hydraulic Pumps Shown: Z42MX, Z442MX TEX ertified See explanation of TEX certification in the Yellow Pages. II 2 G ck T4 Page: 13 Features Zlass high efficiency pump design, higher oil flow and bypass pressure Twospeed operation and high bypass pressure reduces cycle time for improved productivity Internal relief valves. One is factory set for overload protection while the second is user adjustable for presetting maximum system pressure Sight gauge on 1 and 2 gallon and level gauge on 2.5, 5 and 1 gallon reservoirs allow quick and easy oil level monitoring Optional heat exchanger warms exhaust air to prevent freezing and cools the oil Speed hart To determine how a Z pump will operate your cylinder, see the Pump/ylinder Speed hart in the Yellow Pages. Page: 113 Hoses Enerpac offers a complete line of highquality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses. Page: 116 ynamic Range Z4 Performance onsumption (db) with ylinder oubleacting Oil apacity (gal) Manual VM32 Manual VM43 1) ctual flow will vary with air supply 2) See valve section for hydraulic symbols and details Z424MX Z42MX Z422MX Z444MX Z44MX Z441MX Z442MX Z444MX Output Flow Rate 1) Function 2) (in 3 /min) 1 psi 7 psi 5, psi psi dvance/ Retract dvance/ Hold/ Retract

6 Z Hydraulic Pump Ordering Matrix USTOM BUIL YOUR Z4 IR PUMP This is how a Z Pump model number is built up: Z 4 2 M X F H K Z4 1 Product Type 2 Motor Type 3 Flow group 4 Type 5 oil capacity 6 Operation 7 Voltage 1 Product Type Z = Pump class 2 Motor Type = motor 3Flow Group 4 = in 3 /min@ psi 4 Type = No valve with coverplate 2 = 3way, 2position (VM32) 3 = 3way, 3position (VM33) 4 = 4way, 3position (VM43) 6 = 3way, 3position, locking (VM33L) = 4way, 3position, locking (VM43L) 5 Oil apacity 4 = 1. gallon = 2. gallon 1 = 2.5 gallon 2 = 5. gallon 4 = 1. gallon 6 Operation M = Manual valve N = No valve 7 Voltage X = Not applicable (Specify in alphabetical order) F = Filter G = 15, psi gauge (2 1/2") H = Heat exchanger K = Skidbar (1 and 2 gallon reservoirs only) N = No reservoir handles (includes lifting eyes; 2.5, 5, 1 gallon only) R = Roll bars Ordering Example : Z42MXFHK Z42MXFHK is an air operated pump with a 3way, 2position manual valve, a 2. gallon reservoir, filter, heat exchanger and skid bar. Reservoir apacity: 1.1. gal. Flow at Rated : in 3 /min. Maximum Operating : psi User adjustable relief valve on all manual valves inlet 1/2" NPTF Return Line Filter (optional) Oil Sight Gauge Roll Bar (optional) Oil rain Skid Bar (model no. SBZ4) (optional) E B M x deep E and 2 gallon reservoirs 2.5, 5, 1 gallon reservoirs 17.5 B (Optional) (4) lifting eyes F G 4 x ø.34 Mounting Hole Handles (standard) imensions (in) B E F G (incl. oil) FLOW HRT 1 psi ynamic at 7 scfm Oil flow (in3/min)