10.5 gal. Vertical Oil Lubricated Air Compressor

Transcription

1 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable oil-free compressors Extremely quiet operation Rubber grip handle & wheels for easy transport Includes air line regulator & two easy-to-read pressure gaugesallows setting exact line pressure Quick-connect fitting Tough powder coated tank Max. pressure: 115 psi (8 Bar, 793 kpa) Power: 1500 W 120 V ~ 60 Hz Motor speed: 3400 rpm Air 40 psi: 5 90 psi: 4 cfm ETL certification Net weight: 62 lb. (28 kg) UPC: Pkg. dim.: in. x in. x in. (405 mm x 405 mm x 850 mm) Cube: 4.92 cu.ft. ( m³)

2 Oil Lubricated Hot Dog Air Compressor Model No. AC1106 Tank volume: 1.6 gal. (6 L) Direct drive oil-lubricated single cylinder pump for durability and long life- triple the pump life of comparable oil-free compressors Extremely quiet operation Rubber grip easy-carry handle Includes air line regulator & two easy-to-read pressure gauges- allows setting exact line pressure Quick-connect fitting Tough powder coated tank finish Max. pressure: 115 psi (8 Bar, 793 kpa) Power: 1 HP (0.75 kw) 120 V ~ 60 Hz Motor speed: 3400 rpm Air 40 psi: psi: 2.4 cfm Net weight: 33 lb. (15 kg) UPC: Pkg. dim.: in. x 9.45 in. x in. (515 mm x 240 mm x 465 mm) Cube: 2.03 cu.ft. ( m³) Gross weight: 35 lb. (16 kg) Container qty.: 404 pc./20 ft., 808 pc./40 ft., 1010 pc./40 ft. High Cube

3 4 x 36 inch Belt / 6 inch Disc Sander Model No. BD to 45 degree tilting aluminum work table can be angled for miter polishing Belt sander tilts to work both horizontally and vertically, grinding and polishing flat and cambered surfaces Strong cast iron base, steel belt bed & aluminum disc 6 in. diameter aluminum disc backing plate Quick release system ensures easy belt change Belt is easily adjusted with tracking knob No-load motor speed: 3450 rpm 16-1/2 in. x 4-7/8 in. x 2-3/8 in. belt table tilts 90 degrees from horizontal to vertical Provided with an L-shaped steel work stop 2-1/4 in. (58.15 mm) I.D. dust port Safety on/off switch with removable key Durable aluminum disc work table with miter gauge Tilting aluminum work table dim.: 6-1/4 in. x 8-7/8 in. (159 x 225 mm) includes miter gauge slot 120 V ~ 60 Hz 4 Amp 375 W motor Includes: miter gauge, 6 in. (152.4 mm) peel-&-stick sanding disc and 4 in. x 36 in. (101.6 x mm) sanding belt Net weight: 37 lb. (17 kg) UPC: Pkg. dim.: in. x in. x in. (560 mm x 260 mm x 300 mm) Cube: 1.54 cu.ft. ( m³) Gross weight: 40 lb. (18 kg) Container qty.: 560 pc./20 ft.

4 6 inch Bench Grinder Model No. BG6001 Twin LED work lights on adjustable flex shafts Powerful, maintenance-free induction motor Large eye shields Mountable base 120 V ~ 60 Hz 250 W motor No-load speed: 3450 RPM Wheel size: 6 in. diam. x 3/4 in. thick x 1/2 in. bore (150 x 20 x 12.7 mm) Net weight: 19 lb. (8.5 kg) UPC: Pkg. dim.: in. x 8.27 in. x in. (385 mm x 210 mm x 270 mm) Cube: 0.77 cu.ft. ( m³) Gross weight: 21 lb. (9.5 kg) Container qty.: 1300 pc./20 ft.

5 9 inch Band Saw Model No. BS5105 Wood cutting Induction motor Cast aluminum frame, access plastic doors Cast aluminum work table Rubber coated aluminum wheels Removable-keyed safety switch Includes rip fence and mitre gauge 120 V ~ 60 Hz 2 Amp 230 W motor Single speed: 2625 ft./min. (800 m/min.) Table size: 11-3/4 x 11-3/4 in. (300 x 300 mm) Max. cutting height: 3-1/2 in. (89 mm) Throat: 9 in. (229 mm) Table tilt range: 0 to 45 degrees Blade length: 59-1/2 in. (1511 mm) Net weight: 30 lb. (13.5 kg) UPC: Pkg. dim.: in. x in. x 31.1 in. (415 mm x 285 mm x 790 mm) Cube: 3.3 cu.ft. ( m³) Gross weight: 35 lb. (16 kg) Container qty.: 280 pc./20 ft., 580 pc./40 ft.

6 4 inch Benchtop Metal-Cutting Band Saw Model No. BS5202 Compact for bench top use Heavy duty steel base Light and strong cast aluminum saw head frame Cast iron vise opens to 4-1/8 in. (105 mm) Pivoting head with scale for miter cuts to 45 degrees Two speeds help to cut ferrous and non-ferrous metals Adjustable blade guide Designed for dry cutting 120 V ~ 60 Hz 600 W motor Includes blade: 52-1/2 x 1/2 x in. / 8-12 tpi variable (1335 x 12.7 x 0.64 mm / mm pitch) Max. cutting capacity (round): 4-1/8 in. (105 mm) (square): 4 x 4 in. (102 x102 mm) Blade speeds: 197 & 262 ft./min. (60 & 80 m/min) ETL certification Net weight: 33 lb. (15 kg) UPC: Pkg. dim.: in. x in. x in. (730 mm x 380 mm x 502 mm) Cube: 4.92 cu.ft. ( m³) Gross weight: 37 lb. (17 kg) 20 load:192 pc.

7 4-1/2 inch Metal Cutting Band Saw Model No. BS5205 : Heavy duty steel stand Strong cast iron saw head frame Cast iron vise opens to 6 in. (150 mm): Three speeds for cutting ferrous and non-ferrous metals Adjustable blade guide 120 V ~ 60 Hz 550 W motor Includes 64-1/2 in. (1638 mm) blade Max. cutting capacity (round): 4-1/8 in. (105 mm) (square): 4 x 6 in. (102x150 mm) Blade speed: 262 / 394 / 591 ft/min (80 / 120 / 180 m/min) CSA certification Net weight: 134 lb. (61 kg) UPC: Pkg. dim.: in. x 12.6 in. x in. (1005 mm x 320 mm x 380 mm) Cube: 4.32 cu.ft. ( m³) Gross weight: 143 lb. (65 kg) 20 load:195 pc.

8 14 inch Metal Cut-Off Saw Model No. BT8005 Comfortable horizontal D handle Hold-down lock button and carry handle Arbor lock makes blade changes easy Vise clamp assembly with quick release Fence adjustable 0 to 45º Safety interlock trigger Cuts material up to 4-1/2 inches With correct blade, can be used to cut conduit, ABS, copper pipe, tile; even concrete Motor: 120 V ~ 60 Hz 15 A Blade diameter 14 in. (356 mm) No-load speed: 3600 rpm Cutting capacity (round): 4-5/16 in. (110 mm) (square): 4-1/2 in. x 4-1/2 in. (115 mm x 115 mm) Strong steel base Includes 14 inch diam. x 1/8 thick x 1 arbor abrasive metal cutting disc Net weight: 40 lb. (18 kg) UL certification UPC: Pkg. dim.: in. x in. x in. (540 mm x 290 mm x 390 mm) Cube: 2.16 cu.ft. ( m³) Gross weight: 46 lb. (21 kg) Container qty.: 376 pc./20 ft.

9 16 inch Variable Speed Scroll Saw Model No. BT8007 Up-front dial allows setting the exact cutting speed choice for processing different materials Flex-neck LED work light lets you put the light where you want it Saw dust blower keeps the cut line clear Motor: 120 V, 60 Hz, 1.2 A No-load variable speed: rpm Max. cutting capacity (throat depth): 16 in. (406 mm) Max. cutting thickness: 2 in. (50 mm) at 90º Stroke length: 5/8 in. (15 mm) Saw dust collection port for standard 1-1/4 in. (31.75 mm) hose Strong cast iron base Cast aluminum work table tilts 0º to 45º left with up-front locking knob and bevel scale Low noise, low vibration Patented blade holder accepts standard 5 in. (127 mm) pin-end or plain-end (pinless) scroll saw blades Side storage compartment on the housing for spare blades and wrenches Top-mounted tensioner knob Easy-access motor brushes Safety On/Off switch with removable security key Net weight: 24 lb. (11 kg) Pkg. dim.: in. x in. x in. (670 mm x 330 mm x 365 mm) Cube: 2.85 cu.ft. ( m³) UPC: Gross weight: 26 lb. (12 kg) Container qty.: 354 pc./20 ft.

10 Portable Drum Dust Collector Model No. BT8008 Metal dust collection drum Motor: 3/4 HP Features large carry handle 0.5 Micron filtration efficiency No-load speed: 20,000 rpm Voltage: 120 V AC, 60 Hz, 9.2 A, 1100 W Air Flow Rate: 108 cfm Flexible hose: 4 in. (100 mm) dia. x 7 ft. (2.1 m) Dust collection drum capacity: 13.2 US gal. (50 L) Noise level: 85 db (A) Contents 1 x Dust Extractor 1 x Cartridge filter 1 x Flexible hose 3 x Filter bags 4 x Hose adaptors: 34, 40, 45 and 68 mm (1-5/16 in., 1-9/16 in., 1-3/4 in. & 2-11/16) Net weight: 23 lb. (10.5 kg) UPC: Pkg. dim.: in. x in. x in. (410 mm x 410 mm x 700 mm) Cube: 4.15 cu.ft. ( m³) Gross weight: 26 lb. (12 kg) Container qty.: 195 pc./20 ft., 400 pc./40 ft.

11 Dust Collector Model No. BT8010 Heavy duty steel mobile base and frame with PVC wheels & hose : Transparent collection bag allows view of dust accumulation 120 V ~ 60 Hz 550 W motor: Speed: 3450 rpm: Inlet diameter: 4 in. (100 mm) Capacity: 677 cfm (1150 m3/h) Includes: 78-3/4 in. (2 m) flexible dust extraction hose Plastic lower collection bag Cloth upper filter bag ETL certification Net weight: 55 lb. (25 kg) UPC: Pkg. dim.: in. x in. x in. (895 mm x 540 mm x 440 mm) Cube: 7.51 cu.ft. ( m³) Gross weight: 62 lb. (28 kg) Container qty.: 125 pc./20 ft., 250 pc./40 ft.

12 8 inch Bench Mount Drill Press Model No. DP speeds Patented cross-pattern precision laser alignment and centering guide Voltage/Frequency: 120 V ~ 60 Hz Power: 250 W Swing: 8 in. (208 mm) Drilling capacity: 1/2 in. (13 mm) Taper: JT33 Spindle travel: 2 in. (50 mm) Speed: rpm (5 speed) Table tilt: 0 45 degrees Easy-access safety switch with removable security key Transparent chuck safety guard Soft-grip feed handles Depth scale Heavy cast-iron and steel construction Net weight: 33 lb. (15 kg) UPC: Pkg. dim.: in. x in. x 9.06 in. (456 mm x 340 mm x 230 mm) Cube: 1.26 cu.ft. ( m³) Gross weight: 37 lb. (17 kg) Container qty.: 820 pc./20 ft.,

13 10 inch Bench Mount Drill Press Model No. DP speeds Patented cross-pattern precision laser alignment and centering guide Unique built-in LED work light illuminates the work table Voltage/Frequency: 120 V ~ 60 Hz Power: 250 W Swing: 10 in. (254 mm) Drilling capacity: 1/2 in. (13 mm) Taper: JT33 Spindle travel: 2-3/8 in. (60 mm) Speed: rpm (5 speed) Table tilt: 0 45 Easy-access safety switch with removable security key Transparent flip-up chuck safety guard Large soft-grip ergonomic feed handles Depth scale Heavy cast-iron and steel construction Net weight: 62 lb. (28 kg) UPC: Pkg. dim.: in. x in. x 9.65 in. (550 mm x 380 mm x 245 mm) Cube: 1.81 cu.ft. ( m³) Gross weight: 68 lb. (31 kg) Container qty.: 540 pc./20 ft.

14 13 inch Floor Mount Drill Press Model No. DP speeds Patented cross-pattern precision laser alignment and centering guide Unique built-in LED work light illuminates the work table Voltage/Frequency: 120 V ~ 60 Hz Power: 550 W Swing: 13 in. (330 mm) Drilling capacity: 5/8 in. (16 mm) Taper: MT2 Spindle travel: 3-1/8 in. (80 mm) Speed: rpm 16 speed Table tilt: 0 45 Easy-access safety switch with removable security key Transparent flip-up chuck safety guard Large soft-grip ergonomic feed handles Depth scale Heavy cast-iron and steel construction Net weight: 112 lb. (51 kg) Carton with full colour label UPC: Pkg. dim.: in. x in. x 9.65 in. (1400 mm x 494 mm x 245 mm) Cube: 5.99 cu.ft. ( m³) Gross weight: 123 lb. (56 kg) Container qty.: 160 pc./20 ft.

15 15 inch Floor Mount Drill Press Model No. DP2006 Patented cross-pattern precision laser alignment and centering guide Unique built-in LED work light illuminates the work table 5/8 in. (16 mm) chuck capacity 15 inch (390 mm) swing 120 V ~ 60 Hz 550 W motor 16 speeds Speed range: rpm Drilling capacity: 25/32 in. (20 mm) Easy-access safety switch with removable security key Transparent flip-up chuck safety guard Large soft-grip ergonomic feed handles Depth scale Heavy cast-iron and steel construction Overall height: 63-3/8 in. (1610 mm) Net weight: 137 lb. (62 kg) Carton with full colour label UPC: Pkg. dim.: in. x in. x 9.65 in. (1400 mm x 494 mm x 245 mm) Cube: 5.99 cu.ft. ( m³) Gross weight: 148 lb. (67 kg) Container qty.: 160 pc./20 ft.

16 10 in. Sliding Compound Miter Saw with Laser Model No. MS3005 Comfortable horizontal D-Handle Dual slide rails for rigidity Bevel cuts up to 45 degrees left Miter cuts up to 45 degrees left and right 10 in. saw blade with carbide-tipped teeth Precision cuts with laser alignment system Includes: Hold down clamp Table side extension bars 120 V ~ 60 Hz 15 A 1.8 kw motor No-load speed: 4400 rpm Cut capacities: Cross 90 degrees: 3-1/8 in. H x 11-3/4 in. W (80 mm x 300 mm) Miter 45 degrees: 3-1/8 in. H x 7-7/8 in. W (80 mm x 200 mm) Miter and bevel compound 45 et 45 : 1-5/8 in. H x 7-7/8 in. W (40 mm x 200 mm) Net weight: 29 lb. (13 kg) UPC: Pkg. dim.: in. x in. x in. (760 mm x 490 mm x 410 mm) Cube: 5.39 cu.ft. ( m³) Gross weight: 34 lb. (15.5 kg) Container qty.: 170 pc./20 ft., 360 pc./40 ft., 432 pc./40 ft. High Cube

17 Miter Saw Stand with wheels Model No. MS3102 Wheeled for convenient transport Lightweight tubular steel frame with strong 38 mm diameter legs and dual crossbars Legs click and lock into operating position Universal mounting adaptors fit most saws Lever-actuated quick-release saw mounting system for easy saw removal and replacement Height-adjustable support extensions equipped with handy material cutting stops and rollers Dimensions: (retracted length) 47 (extended length) 79 x 25 x 35 ( x 632 x 900 mm) Height: 35, extendable to 39 (900 mm to 987 mm) Load capacity: 330 lb. (150 kg) Net weight: 30 lb. (13.5 kg) UPC: Pkg. dim.: in. x in. x 8.43 in. (1240 mm x 308 mm x 214 mm) Cube: 2.89 cu.ft. ( m³) Gross weight: 33 lb. (15 kg)

18 10 inch Table Saw Model No. TS4001 Powerful 13 A motor 120 V ~ 60 Hz 13 A Cast aluminum work table 5700 rpm Max. cutting height: at 90 : 2-7/8 in. (73 mm) at 45 : 2-5/8 in.(65 mm) Tilting range: 0 to 45 left Table dimensions: 26 in. x 17-3/8 in. (660 mm x 440 mm) Table height (on stand): 35-3/8 in. (900 mm) Includes: 10 in. (254 mm) 24 tooth TCT saw blade Rip fence Mitre gauge Push stick Metal stand Blade guard Riving knife Anti-kickback pawls Net weight: 44 lb. (20 kg) UPC: Pkg. dim.: in. x in. x in. (700 mm x 560 mm x 370 mm) Cube: 5.12 cu.ft. (0.145 m³) Gross weight: 51 lb. (23 kg) Container qty.: 192 pc./20 ft., 402 pc./40 ft., 470 pc./40 ft. High Cube