ENG/OP

Transcription

1

2 Our suppliers for catalogue group : VERIOR - é h Z V Z ú U 2 É 1 í : j

3 ß Hommel Hercules 0002 law ar (Wrecking ar) 4 Quality steel, lacquered, with edged shank, nail claw and chisel Length Ø 0002 mm mm Goose Neck law ars (Reinforcement ars) 4 High quality steel, round, with straight claw bar and chisel, lacquered. Special heavy-duty model for removing casings. For the construction industry Length Ø 0004 mm mm row ars 4 With curved pinch and tip made of special steel Length Ø 0006 mm mm Roller row ar 4 With iron rollers. Special steel, lacquered. For transporting heavy and bulky goods. 000 Length apacity Weight 000 approx. mm approx. kg approx. kg Sheet Metal Lifting lamps Model TIGRIP-TL The TIGRIP-lifting clamps have an absolute firm grip. Resistant proofed jaws with sharp teeth are positioned horizontal to lifting direction. The lifting ring draws the flexible clamping jaw, ensuring highest contact pressure on the sheets. Steady pressure covering the entire clamping range, influenced by the weight of transporting goods. With safety lock, operated by locking lever Sheet surfaces must have a hardness below HR 30! Specially suitable for raising horizontal sheets and for transporting upright sheets. Sheet lifting clamps with swiveling eyelet and safety lock, lifting capacity kg available on request. heü 0059 apacity Jaw Opening Weight 0059 kg mm approx. kg , , ,

4 Workshop Furnishings 0070 in Grippers Model TK Easy to handle, the Tigrip bin gripper securely grips the crimpings from the inside on the sides or on the front, therefore, transport of bins is safe and damage-free. in grippers which grip from the outside, with rotation function and with special jaw ranges available on request. NEW 0070 Jaw Range apacity 0070 mm kg Sheet arrying Plier Model THG For handling lightweight and thin sheets. spring-loaded mechanism prevents unintentional release of the sheets. Sheet surfaces must have a hardness below or equal to HR 30! Figure 1 = Opening and closing, Figure 2 = transporting. apacityjaw Opening Weight 0075 kg mm mm mm mm mm kg , Vacuum Lifters VERIOR For all smooth and gastight surfaces. Further types available on request Vacuum lifters blue-line, aluminium body, 1 vacuum disc Ø 120 mm one-hand operated. Sucking by switching over the handle. Loading capacity/vertical force direction approx. 30 kg Vacuum lifters blue-line, automatic body, 2 vacuum discs Ø 120 mm. Sucking by switching over both handles. Loading capacity/parallel force direction approx. 60 kg Vacuum lifters, aluminium housing, 2 vacuum discs Ø 130mm. One-hand operation. Loading capacity/vertical force direction approx. 60 kg Vacuum lifters with built-in hand pump 1 vacuum disc Ø 210 mm, high loading capacity, plastic-coated handle, release lever is protected against unintentional release. Only a few pump strokes are necessary. With profiled rubber disc with 3 gasket lips, built-in reinforcer ring ensures quick vacuum build-up. Loading capacity/parallel force direction approx. 120 kg. In plastic case Spare rubber disc for vacuum lifters cat.-no Spare rubber disc for vacuum lifters cat.-no Spare rubber disc for vacuum lifters cat.-no Spare rubber disc for vacuum lifters cat.-no NEW Vacuum lifters Spare disc apacity approx. kg

5 0100 Robust design with rope exit downwards. Housing made of aluminium. alancers (Spring-) For balancing tools and other gear up to the stated max. load capacity. Load capacity can easily be adapted to the respective tool. ß Hommel Hercules 0100 Load capacity Max. Extended length Weight 0100 kg mm kg 0,4-1, , ,0-2, , ,0-3, , ,0-4, , ,0-6, , ,0 -, , NEW 0120 Spur-Wheel hain locks Model Yale Lift 360 Robust housing made of sheet steel, ball bearings in housings and sliding sleeves. Round steel chain with surface protection. Patented breaking system, lower noise level and wear than standard brakes. 1 hoisting chain. Thanks to the 360 rotatable hand chain guiding system, the operator can operate the hoist from all positions and therefore does not have to stand in the dangerous hoisting area anymore. Therefore more security through free choice of the position. Greater capacities available on request apacity Hoisting height Hoisting power at Weight kg m nominal load kg kg Spur-Wheel hain locks Model VSplus Robust housing made of steel, high-quality enclosed bearings, continuous stud bolts between the lateral plates for improved stability. rake system dust-proof. Hooks rotatable 360, galvanised hoist and hand chains. Extremely easy to maintain. Hoisting chain EN 1-7 (grade T). With friction clutch and chain container available on request. e Ü 012 apacity Number of Hook travel Hoisting power at Smallest distance Weight 012 kg hoisting chains m nominal load dan between hooks mm kg , , , , Spur-Wheel hain locks with uilt-in Roller Trolley Model Yale Lift 360 ITP ombination consisting of the innovative Yale Lift 360 (cat.- no. 0120) with a roller trolley. ompact and robust unit with the advantages of small dimensions (very low, smallest hook dimensions). Robust housing made of sheet steel, ball bearings in housings and sliding sleeves. Round steel chain with surface protection. Patented breaking system, lower noise level and wear than standard brakes. 1 hoisting chain. The low height is especially important if a low room height needs to be used efficiently. Thanks to the 360 rotatable hand chain guiding system, the operator can operate the hoist from all positions and therefore does not have to stand in the dangerous hoisting area anymore. Therefore more security through free choice of the position. e Ü 0136 NEW apacity Hook travel Width Smallest hook Hoisting power at Weight 0136 kg m mm dimensions mm nominal load dan kg , ,

6 Workshop Furnishings 0140 Girder Trolleys Model HTP With trolley. rop-forged rollers, with ball bearings. Serial equipped with anti-tilt device and safety device to prevent roller breaks. Heavy-weight bolts with right- and left-hand thread, therefor no distance discs required. For taking and moving hand-, electric- and compressed air lifting tools. djustable for a wide range of girders and different profiles (INP, IPE und IP). Girder trolleys for further profile sections, capacities and hoisting heights as well as fully galvanized trolleys available on request. Ü 0140 apacity Range of Min. curve Weight 0140 kg girders mm radius mm approx. kg , , , Girder lamps Model Y. The spindle mechanism with locking device enables the clamps to be mounted easily but securely on girder flanges vertically or horizontally. With low headroom due to the integrated load axis. djustable to a wide range of girder profiles (INP, IPE und IP). For fast fixing of different fixed stops for lifting appliances, diverter pulleys and other loads for a wide range of applications. Higher capacities like 3, 5, 10 t and up to 320 mm width of girder flange available on request. e Ü 0145 Load apacity Girder flange Weight 0145 kg mm kg , , ll-purpose Tools utomatic friction load brake, with hand wheel for racing the unloaded chain, with dustproof, closed housing. Hook travel 1,5 m. 1 hoisting chain. For hauling, hoisting and tightening with hand lever. Further ratchet lever tackles, lifting capacity 6 and 10 t, available on request Model Yale Handy The smallest and lightest allpurpose tool. Round steel chain, housing made of sheet steel, short hand lever, galvanized, chain release Model 5. With galvanized round steel chain, housing made of malleable cast iron for heavy-duty application. Hoisting chain wheel made of spheroidal cast iron. Tool with overload protection and roller chain available on request Model UNO Made of sheet steel, compact design with high-strength galvanised round steel chain. Smooth running chain release, low force necessary at the hand lever Model L With round steel chain galvanized, housing made of aluminium - with very short hand lever. hain release. Lightweight at highest stability Model PT. With round steel chain, galvanised. Robust sheet steel housing for better performance with low weight. High-quality workmanship. Smooth running chain release, small hook dimensions. Hoisting height 1,50 m. NEW 0162 heü

7 ß Hommel Hercules apacity Hoisting power at Smallest Weight 0159 Model kg nominal load dan hook dimensions mm kg Handy ,2 101 Handy , apacity Hoisting power at Smallest Weight 0160 Model kg nominal load dan hook dimensions mm kg , , ,6 103 apacity Hoisting power at Smallest Weight 0162 Model kg nominal load dan hook dimensions mm kg UNO ,0 101 UNO ,0 102 UNO ,0 103 apacity Hoisting power at Smallest Weight 0166 Model kg nominal load dan hook dimensions mm kg L ,4 101 L ,0 102 L ,0 103 Model L Example for application apacity Hoisting power at Smallest Weight 0167 Model kg nominal load dan hook dimensions mm kg PT ,5 101 PT ,6 102 PT , Model LP. Sheet steel, but lightweight with strong performance. Incl. of hooks, 10 m hoisting cable and hand lever. Winches 0170 Model Yaletrac. High-strength aluminium alloys, low own weight, highest stability. Incl. of hoisting cable, winder and hand lever. ehü Tension force Lever force at able Ø Weight kg nominal load dan mm without cable kg , , , , Electric hain Hoists Model PM/PMF With carrying hook. Robust, reliable tool. Easy to maintain with long service life. The integrated stop switch considerably improves the service life of friction clutch, drive and gearings. Workmanship and components: rive group 1 m. (3m, if necessary). In accordance with European standards FEM, ISO or S. ontactor voltage 4 V is standard. Warranty of 2 years (not for wear parts). Thermal overload protection. Hoisting height 3 m. rives in compliance with VE 0530, IP 55. Operating voltage 400 V, 50 Hz, 3 phases. Ü 0231 Further lifting capacities available on request. Lifting capacity load- Maintravel Prec. travel uty Net weight with 0231 Model kg chains m/min m/min cycle % carrying hook kg PMF / PM hain container For electric chain hoists, cat.-no For hoisting heights up to 3 m

8 Workshop Furnishings 0250 Sling elts YaleTex H 2-layer, on both sides with reinforced loops, made of polyester (PES), in compliance with EN , with capacity label, colour code and woven-in ton strip. Further lifting capacities and usable lengths available on request. Ü 0250 Lifting capacity Length olour Loop elt 0250 kg L 1 m coding length L 2 mm width mm violet violet violet green green green yellow yellow yellow grey grey red red ircular Slings YaleTex RS ouble shell, made of polyester (PES), EN with double seamless protection sleeve, capacity labels, lifting capacity printed-on, colour code and/or woven-in ton strip, one strip per 1 metric ton lifting capacity (only for circular slings up to 10 metric tons). Further lifting capacities and usable lengths available on request. Ü 0255 apacity Useable length 0255 kg L 1 m olour ,0 violet ,5 violet ,0 violet ,0 violet ,0 violet ,0 green ,5 green ,0 green 205 apacity Useable length 0255 kg L 1 m olour ,0 green ,0 green ,0 yellow ,5 yellow ,0 yellow ,0 yellow ,0 yellow ,0 yellow Lashing Straps YaleTex Polyester in compliance with IN and VI Further hoisting heights and capacities up to 20t available on request With pointed hook and ratchet With stop lock.. = iagonal lashing = Pull down lashing = llround Ü Length Strap width Length Tensile force kg m mm fixed end m , , , ,

9 ß Hommel Hercules Hoisting hains In compliance with IN EN 1-4. With suspension link and top load hook, grade. hain with longterm corrosion protection. Safe and heavy-duty type chain for multi purpose use, even for edged and bulky goods. Ü 0300 at.-no and 0310 tilt angle max. 60. Ü 0305 Ü 0310 apacity kg 1 chain Nominal single Usable length 0300 chain Ø mm direct bound L 1 m apacity kg 2 chains hain- direct bundled Useful length 0305 nominal Ø mm 0-45 / /45-60 L 1 m / / / / / / / / / / / / apacity kg 4 chains hain Useful length 0310 nominal Ø mm L 1 m Eyelets close to IN 2101, Form With threaded bolt, galvanized. Further sizes available on request apacity 0320 kg mm mm mm mm , , , , , , , Ring olts and Ring Nuts Ring bolt close to IN with collar and groove, galvanized Ring nut close to IN 52 15, galvanised. d l d 1 d 2 d 3 h e 0323 mm mm mm mm mm mm mm M M M M 12 20, M M M d l d 1 d 2 d 3 h e 0323 mm mm mm mm mm mm mm M ,5 201 M ,5 202 M M M M M Galvanized Spring hooks close to IN 5299 Further sizes available on request. W Nominal thick- H O W 0330 ness mm mm mm mm H 0.9

10 Workshop Furnishings 0335 S-Hooks oth ends open, large opening radius for special applications losed on one end, not welded. Large opening radius for special applications. Red lacquered Lifting capacity Weight F E G 0335 kg kg mm mm mm mm 750 0, , , , , , , Suspension Gear Set onsisting of: 1 hoisting chain, grade, chain with corrosion-proof coating. omponents orange, powder-coated. Nominal thickness of chain 6 mm, 2 chains, with 2 chain length reducers and 2 safety load hooks. Usable length of chain L = 1,5 m. Lifting capacity at tilt angle 0-45 = 2000 kg, = 1400 kg. 1 POLYTEX-circular sling Usable length L1 = 1 m, Lifting capacity at mounting, single direct = 1000 kg, single folded = 2000 kg. In case. This practical set is an all-purpose suspension gear, for all applications in the repair and maintenance sectors. Ü 033 Weight incl. case 033 kg 4, Steel Winches IN ll-steel construction, with rising casing, safety crank with folding grip. Tempered and hardened gear components. ll parts replaceable. For lifting and lowering loads. eh apacity Jack height Hoisting height Toe height Weight 0400 kg mm mm mm approx. kg Hydraulic Jacks - ll-steel construction, toe can be removed and adjusted in height, for use in any position, with built-in pressure relief valve as overload protection and precision-adjustable drain valve. Hard chome-plated lifting piston, square flat base. For lifting, pressing, lowering and pushing. Round convex base, with base plate available on request. ehü 0421 Permitted Jack height Stroke Toe length Min. toe height Weight 0421 capacity kg mm mm mm reversible to mm / 160 / / 160 / 240 / 320 /

11 ß Hommel Hercules 0526 Hydraulic Vehicle Jacks IN With pressure relief valve in compliance with VG, galvanized tube bars, 3-part, 700 mm long. With one hydraulic piston and a threaded spindle for setting the required height to contact load. For cars and lorries, can also be used horizontally (control device below the jack), lowering by opening of the drain valve. ehü 0526 Perm. capacity Jack height Hydr. Spindle Extension 0526 max. kg mm lift mm adjust. mm mm Hydraulic Vehicle Jacks IN With pressure relief valve to VG, galvanized tube bars, 3-part, 700 mm long. With two hydraulic pistons, without threaded spindle. For cars and lorries, can also be used horizontally (control device below the jack), lowering by opening of the drain valve. at.-no with screw spindle, plus 5 mm total stroke 340 mm. ehü 0529 Perm. capacity Jack height Hydr. lift Extension 0529 max. kg mm mm mm Lightweight, handy design with smooth running rollers. Torsion-free frame, rotatable carrying plate, with relieve valve. Garage Jacks Mobile lifting device for lifting and lowering of automobiles and other loads, with pumping lever, which can also be used as towing bar. Ü 0540 apacity Height min. Height max. Frame length Stroke Weight 0540 t mm mm mm mm kg 2, Hydraulic Workshop ranes - With rotatable hook and frame, adjustable into 3 positions, overload valve, stroke limitation, wheels made of polyamide, swivel rollers. Frame height 0 mm. Easy handling, quick folding, space-saving. Ü F = 0 mm G E 0560 apacity kg Height max. mm Length of arm mm Frame mm istance G Height of base F Weight Length Height E mm mm kg

12 Workshop Furnishings Hydraulic Tools Here are some of the System-Hydraulic-Tools: For lifting, pushing, hauling, tightening, bending etc. Please contact us for further help in finding the correct size, performance, lifting length or model. Solve your problems by using the high-quality -hydraulic tools. Please contact us for a brochure with information about applications and accessories Single action. Max. operating pressure 700 bar. Piston made of hard chrome-plated quality steel. With exchangeable, corrugated pressure piece, strong return spring, wiping ring. External thread on cylinder head, piston bar with internal thread and mounting thread on cylinder bottom. oupling muff with dust cover. Multi Purpose ylinders R lso available made of aluminium ylinder type Lift Effective Oil ylinder height Weight 0600 t (kn) mm piston surface cm 2 volume cm 3 closed mm kg R 51 5 (45) 25 6, ,0 101 R 53 5 (45) 76 6, ,5 102 R 55 5 (45) 127 6, ,9 103 R 57 5 (45) 177 6, ,4 104 R (101) 54 14, ,3 105 R (101) , ,3 106 R (101) , ,4 107 R (101) , ,4 10 R (142) , ,0 109 R (142) , , 110 R (142) , ,2 111 R (232) 50 33, ,4 112 R (232) , ,2 113 R (232) 15 33, ,0 114 R (232) , ,

13 ß Hommel Hercules 0630 Short Lift ylinders RSM Single action. Max. operating pressure 700 bar. Piston made of hard-chrome plated quality steel. oupler muff with dust cover. ompact flat model for use within locations not reachable with big size cylinders. Thanks to the corrugated piston end pieces, pressure pieces are not necessary ylinder type Lift Effective Oil ylinder height ylinder height 0630 t (kn) mm piston surface cm 2 volume cm 3 closed mm extended mm RSM-50 5 (45) 6 6, RSM (101) 12 14, RSM (201) 11 2, Short Lift ylinders RS Single action. Max. operating pressure 700 bar. Lightweight cylinder, for use in hard-to-reach places. With piston wiping ring, corrugated pressure piece with 2 mounting holes for mounting mobile pressure pieces, with coupling muff and dust cover ylinder type Lift Effective Oil ylinder height ylinder height 0635 t (kn) mm piston surface cm 2 volume cm 3 closed mm extended mm RS (101) 3 14, RS (201) 45 2, Hollow Piston ylinders RH Single action. Max. operating pressure 700 bar. The hollow piston construction allows to use the cylinder for pressure and hauling works. Mounting thread at the cylinder head for easy assembly. oupler muff with dust cover. lso available made of aluminium ylinder type Lift Effective Oil ylinder height ylinder height entre hole 0640 t (kn) mm piston surface cm 2 volume cm 3 closed mm extended mm Ø mm RH (125) 76 17, ,6 101 RH (215) , ,9 102 RH (326) , , Hydraulic Hand Pumps P Max. operating pressure 700 bar. Two steps for single action cylinder. Low weight and compact construction. Nylon tank and nylon-coated aluminium housing. Hand lever lock, built-in safety valve as overload protection. For type P-142, the connecting piece type FZ-1055 (cat.- no ) is necessary Max. pressure level Transmission volume Useable bar per stroke cm 3 Oil port Lever force 0660 oil volume cm 3 1.step 2.step 1.step 2.step thread max. kg P ,62 0,90 1/4 inch - 1 NPT 35,4 101 P ,26 2,47 3/ inch - 1 NPT 42,2 102 P ,33 2,47 3/ inch - 1 NPT 43, Turbo ir Pumps PTG 0665 Max. operating pressure 700 bar. For single-action cylinders. The turbo system is using the exhausting air for operating the pump drive. Only at 5,5 bar air pressure, a hydraulic pressure of 700 bar will be generated. With air sound absorber - reduces the noise level. Tank port for using the cylinder with remote control. ir and oil intake filter, pressure relief valve as overload protection. Useable Flow volume Flow volume ir pressure ir consumption Weight 0665 oil volume cm 3 l/min without load l/min with load bar l/min kg PTG-1102 N 201 1,0 0,16 1,7-,6 340,

14 Workshop Furnishings 0670 ompact Electric Pumps Typ PU Max. operating pressure 700 bar. For single action cylinders. 230 V/3, PU-1100 E With electric drain valve for automatic retraction of the cylinder, 3 m long remote control for the engine and valve control. For applications without need of holding loads PUJ-1200 E 3 m long remote control for motor operation. Hand-operated 3/2 way valves allows extending- holding and removing of tools and cylinders Useful Max. pressure level bar transmission volume l/min Weight 0670 oil volume l 1st step 2nd step 1st step 2nd Step kg PU-1100 E 1, ,31 0,32 11, 101 PUJ-1200 E 1, ,31 0,32 10, ccessories for ylinders and Pumps istributor mm long, with 7 oil ports istributor mm long, with 7 oil ports. For direct mounting of control valves into the distributor ouble stop valve type M-21 llows to regulate the volume streams for 2 single-action cylinders, with effect to parallel extension Hydraulic high-stream coupler type -604 Incl. of oupling muff and plug included, thread 3/ inch NPT, reference stream 40 l/min., max. operating pressure 700 bar. 065 istributor istributor ouble stop valve M Hydraulic high-stream coupler oupler Muff R oupler Plug H oupler Muff R-400 Single oupler Plug H-604 Single. 3/"-1NPT (7x) , /"-1NPT (7x) ,3 14 3/" 36 NPT /" NPT Hydraulic Oil Maximum pump effect, highest internal heat transmission avoids bubbles inside the pump. ontents 0695 l dditives prevent the build-up of rust and slick and keep oxidation low. High viscosity index, very good lubrication characteristics Thermo-Plastic Hydraulic Hoses H Four layers, including two robust wire nets. Outer surface made of polyurethane for higher wear-resistance caused by friction. Low volume extension under pressure for better system efficiency. Hose Inner Ø Weight 0700 length m mm kg H ,9 6,4 0, 101 H , 6,4 1,0 102 H ,0 6,4 1,5 103 H ,1 6,4 2,9 104 Pressed-on rubber tension stopper for long service life and durability. Hose coupling 3/ inch NPT oupling plug 3/ inch NPT. For heavy-duty work with safety factor 4:1. Max. permitted operating pressure 700 bar

15 ß Hommel Hercules 0705 Hydraulic Glycerin Manometers G Using glycerin for isolating and damping all internal pressure-sensitive parts, which are neccessary for long and defectless use. Including safety glass and pressure compensation membrane. Pressure range bar, minimum value = 10 bar, maximum value = 100 bar, accuracy +/- 1-3% of scale graduation, Lower port 1/4 inch NPTF, Ø 63 mm Lower port 1/2 inch NPTF, Ø 100 mm a b c d 0705 mm mm mm mm G 2535 L /4 Z. NPTF G 4039 L /2 inch NPTF Manometer onnecting Pieces G Max. operating pressure 700 bar. For easy installation of a pressure gauge into your hydraulic system. Plug for direct mounting of the adapter on the pump or the cylinder, the muff fits to hoses or couplers, the third port is used for connecting the pressure gauge. E F F 0710 Port Plug Muff E F 0710 (NPTF) (NPTF) (NPTF) mm mm mm mm mm mm G-2 1/2 inch 3/ inch 3/ inch /2 inch NPT 3/ inch NPT 3/ inch NPT G-3 1/4 inch 3/ inch 3/ inch /4 inch NPT 3/ inch NPT 3/ inch NPT High-Pressure Screw Fittings FZ and FZ For operating pressures of up to 700 bar onnecting thread 0720 from to mm mm FZ-1616 angle fitting 3/ Z.-NPT Stecker 3/ Z.-NPT Muffe / Z.-1 NPTF 3/ Z.-1 NPTF 101 FZ-1617 nipple 3/ Z.-NPT 3/ Z.-NPT / Z.-1 NPTF 3/ Z.-1 NPTF 104 FZ-1614 connecting piece 3/ Z.-NPT 3/ Z.-NPT / Z.-1 NPTF 3/ Z.-1 NPTF 105 FZ-1605 connecting piece 1/4 inch-npt 1/4 inch-npt /4 inch-1 NPTF 1/4 inch-1 NPTF 106 FZ-1612 T-fitting 3/ Z.-NPT 3/ Z.-NPT / Z.-1 NPTF 107 FZ-1630 reducer 3/ Z.-NPT 1/4 Z.-NPT /4 Z.-1 NPTF 3/ Z.-1 NPTF 111 FZ-1055 connecting piece 1/4 inch-npt 3/ inch-npt /4 inch-1 NPTF 3/ inch-1 NPTF

16 Workshop Furnishings 0750 Hydraulic ench and Workshop Presses 0750 The new workshop presses by ENERP are characterised by their power and long service life. They offer excellent price at low cost. Each of these presses is powerful enough to fulfil its tasks with precision and strength. t the same time, they are very user-friendly. The optimized internal heights and table dimensions offer morethan-enough room for a wide range of applications ench press 10 t With single-action cylinder with spring back-draw. Hand pump, hose, pressure gauge and pressure gauge connection fitting included Workshop Press 25 t With single-action cylinder with spring back-draw. The lower yoke can be adjusted by means of a winch. Hand pump, hose, pressure gauge and pressure gauge connection fitting included Workshop Press 100 t With double-action cylinder. The lower yoke can be adjusted by means of the unparalleled -Hydrajust- positioning device. Electric pump aggregate, hoses, pressure gauge and pressure gauge connection fitting included Pressure force max. visual max. visual Lift Overall height Weight 0750 approx. t (kn) height mm width mm mm without cyl. mm approx. kg VLP 106 P (101) VLP 256 P (232) VLP 1006 GPERW 100 (933) ß Workshop Furnishings Planning onsulting Offer elivery Everything from one source We offer individual solutions according to our customers request and with professional competence. Please contact us! Examples: Workshop furnishings made by HHW. 0.16