700 Series Double Reduction Worm Gear Reducers

Transcription

1 700 eries ouble Reduction orm ear Reducers ection ontents roduct Reference uide umbering ystem / ow to rder election rocedure ssemblies and ounting ositions Recommended ubricants utput rpm election Tables Reducer imensions or ther oston ear Reducers, ontact actory /7... oston ear

2 700 eries ouble Reduction atalog umber & Reference uide 700 eries Right ngle orm earbox - ouble Reduction Q Z T lange/arrier/ase aterial lank tandard material ast ron Reducer aterial/aint lank ast ron, td. ray paint ast ron, hite ostleen paint ast ron, tainless ostleen paint tainless teel materialno paint nput haft tyle lank olid rojecting nput haft - Quill tyle otor lange R oupling tyle otor lange Q Quick onnect otor lange (close coupled) utput haft tyle lank olid utput haft ostount ollow utput (setscrews both sides, bore size selectable) ollow utput (setscrews one side, bore size fixed) Reduction Type ouble Reduction arallel hafts ouble Reduction arallel hafts ouble Reduction Right ngle hafts ouble Reduction Right ngle hafts elical ultiplier 2 clock elical ultiplier 6 clock elical ultiplier clock elical ultiplier 9 clock lanetary Torque ulitplier eries xact ear Ratio Ratio to enter istance (inches) ase/ounting ttachment* lank o base kit required & orizontal bases & ertical igh bases & ertical ow bases R/ ostount utput racket nput ertical p Y nput ertical own / ollow / with base / ollow / with *ee catalog for mounting configurations heck atalog r consult factory for availability ubrication lank o lubrication lubersynth obil 64 obil 600 ent lank tandard ent ressure ent (5 psi) Z osivent (sealed) ndcap ( only) ndcap (standard) nput il eal lank tandard eal T Two tandard nput eals otor ounting R T T R YY 4 42Z.500 /8 x /6.625 /6 x /2 7 40T/ /6 x /2 9 80T/20.25 /4 x /8 20T/ /6 x 5/2 250T.625 /8 x /6 lank olid nput haft (o lange) 700 eries ouble Reduction langed & on-langed Reducers rdering nformation - age 70 election/rating nformation - ages 7, 77-8 ubrication - age 76 otor election - ages 4 and 42 /Q700 imensions: /Q700 - age 8 /Q700R/ - age 84 /Q700 - age 87 /Q700R/ - age imensions: age age age / - age 9 /Q700 imensions - age 82 /Q700 imensions - age imensions - age imensions - age 97 /700 imensions: age R - age age R/ - age 99 /700 imensions: age age age / - age 0 68 oston ear /7

3 700 eries orm ear peed Reducers lutch/rake otor T5/8- ostount utput ore ode or eries nly pecified in /6" increments. xample: /4 = 20 5/ /8 4 5/ /6 7 -/8 8 -/6 9 -/4 20-5/6 2 -/8 22-7/6 2-7/6 55 ee catalog page 28 for availability by center distance. onsult factory for metric bores ounting ositions lank - o ubrication upplied -/2 24-5/8 26 -/ /8 0-5/6 or actory relubrication ndicate ounting osition /8 4 2-/6 5 2-/ /6 9 tandard ounting(orm over) 2-6 Refer to ounting ositions on catalog page 72 and 7. utput haft ssembly ommon -ace rakes nstalled 5/20 60hz t-b ore ode 56R- 56R TR /460 60hz t-b ore ode T ther sizes available. ee catalog page 49. oltage otor onduit box rientation (hen looking at fan end of motor and gearbox is in mounting position #) 0 2 clock clock(standard for & shaft assemblies) 6 6 clock 9 9 clock (standard for shaft assemblies) ommon -ace otors nstalled ore ode 5/ / /4 RT T / RT T /2 7 7 RT RT RT-5/8 T T- T- T T- T- T5/8 T5/8- T5/8- T T- ouble Reduction and utput rojection pposite nput ouble utput rojection utput rojection ame ide as nput tainless utput rojection pposite nput tainless ouble utput rojection tainless utput rojection ame ide as nput ouble Reduction and irrored esign utput rojection pposite nput ouble utput rojection utput rojection ame ide as nput tainless utput rojection pposite nput tainless ouble utput rojection tainless utput rojection ame ide as nput ouble Reduction and (hen facing nput) utput rojection own ouble utput rojection utput rojection pward tainless utput rojection own tainless ouble utput rojection tainless utput rojection pward ouble Reduction and (hen facing nput) irrored esign utput rojection own ouble utput rojection utput rojection pward tainless utput rojection own tainless ouble utput rojection tainless utput rojection pward T- T T- T- T5/8 T T- T- T T- T- 5 9 T ther motors available, please see catalog pages 9 to 49. T T 7 9 Totally enclosed non-ventilated Totally enclosed fan cooled tainless nverter uty (0: turn down constant torque) 40T 80T /7... oston ear

4 ouble Reduction umbering ystem / ow to rder tyle ize ase Ratio ubrication ent esignates reducer or flanged reducer, projecting tyle or hollow output shaft. - esignates cast iron flange and base. tandard refix on motor flanges (80T) and up and all bases except horizontal (70-726). - ouble reduction, parallel shaft reducer with projecting output shaft. - ouble reduction, parallel shaft reducer with ostount hollow output shaft. - ouble reduction, parallel shaft reducer with hollow output shaft. - ouble reduction, right angle shaft reducer with projecting output shaft. - ouble reduction, right angle shaft reducer with ostount hollow output shaft. - ouble reduction, right angle shaft reducer with hollow output shaft. - ouble reduction, parallel shaft flanged reducer (Quill types) with projecting output shaft. - ouble reduction, parallel shaft flanged reducer (Quill types) with ostount hollow output shaft. - ouble reduction, parallel shaft flanged reducer (Quill types) with hollow output shaft. - ouble reduction, right angle shaft flanged reducer (Quill types) with projecting output shaft. - ouble reduction, right angle shaft flanged reducer (Quill types) with ostount hollow output shaft. - ouble reduction, right angle shaft flanged reducer (Quill types) with hollow output shaft. Q- ouble reduction, parallel shaft flanged reducer (oupling types) with projecting output shaft. Q- ouble reduction, parallel shaft flanged reducer (oupling types) with ostount hollow output shaft. Q- ouble reduction, right angle shaft flanged reducer (oupling types) with projecting output shaft. Q- ouble reduction, right angle shaft flanged reducer (oupling types) with projecting output shaft. /- tainless steel double reduction with solid output shaft. /- tainless steel double reduction with hollow output shaft. ize enter distance, rounded off. n double reduction models this is the enter istance of the second reduction ase ase positions relative to output shaft. hipped separately as ase its. ee age 29. lank - o ase it, - orizontal ases,,, - ertical ases R/ - ostount utput racket - nput ertical p Y - nput ertical own, - langed bases, available on hollow shaft models only. actory assembled.,- ollow utput with Ratio ee election Tables for available ratios nput eal ounting ubrication ptional prelubrication. lank - o lubrication supplied. obil 64 - lubersynth obil 600 hen specifying optional prelubrication, include mounting position after shaft assembly. ent ressure Relief. lank tandard ent 5 ent Z osient ressure ompensationg ladder hen specifying optional prelubrication, include mounting position after shaft assembly. nput il eal lank tandard eal T ouble nput eals. Recommended for mounting positions 2,, 4, 6 ounting esignates flange size and input bore diameter. langed reducers only. eave blank for projecting input reducers. ore ode ounting nput ore eyway 4 42Z.500 /8 x /6.625 /6 x /2 7 40T/ /6 x /2 9 80T/20.25 /4 x /8 ee page 252 for ounting imensions. ssembly shaft arrangements. ee haft ssembly ssemblies, ages * - tandard assembly * - ouble output shaft projection. * - pposite to standard. * dd after letter for tainless teel haft (ex.,, ) ounting osition esignates the position of oil and vent plugs with respect to mounting. lank - or units not supplied prelubricated ee ages utput ore ode haft ssembly ounting osition pecified in /6 increments. ee age 4 for complete offering. xample: /4 = 20 Required for eries only. ow to rder hen ordering reducers please include code letters for tyle, ize, ase (if required), Ratio, ubrication (if required), ounting (if flanged reducer), haft ssembly and otor (if required). : Required size, 726 Quill types flanged double reduction reducer, 00 to ratio, 5/8 input bore, parallel shafts, standard assembly, no base. otor to be, 750 R, 20/460 olt, hase, 60 cycle, pen ripproof RR: T: or other assembly configurations, contact factory. utput ore ode 70 oston ear /7

5 ouble Reduction peed Reducer election rocedure To properly select a speed reducer, the following application information must be known: nput R (Ratio) utput Torque nput orsepower ervice actor on-otorized peed Reducer. etermine service factor from table below. 2. etermine design horsepower. esign orsepower = pplication oad x ervice actor. elect a speed reducer size that satisfies output R, service class and/or output torque requirements. 4. heck overhung load capacity. otorized peed Reducer. etermine service class from table below 2. elect a reducer size that satisfies output R, service class and/or output torque requirements.. heck overhung load capacity. ervice actor Table lass of ervice ervice actor perating onditions oderate hock-not more than 5 minutes in 2 hours. niform oad-not more than 0 hours per day. oderate hock-not more than 0 hours per day. niform oad-more than 0 hours per day. eavy hock-not more than 5 minutes in 2 hours. oderate hock-more than 0 hours per day..75 eavy hock-not more than 0 hours per day eavy hock-more than 0 hours per day. or complete ervice actors and oad lassifications, see ngineering ection, ages 55 and 56. ouble Reduction election Tables apacity selection tables on ages 77-8 list catalog numbers and ratios of both reducers and gearmotors. utput R, output torque and horsepower are all based on 750 R input. or motorized reducer selection, select the desired output R and refer to the gearmotor ratings column. or non-motorized reducers, refer to the reducer gear capacity columns. or the desired, torque and service factor that satisfies your requirements, a 700 eries basic reducer number will be indicated. or complete catalog part number, descriptions and options, refer to age 70. verhung oad f the output shaft of a speed reducer is connected to the driven machine by other than a flexible coupling, an overhung load is imposed on the shaft. This load may be calculated as follows: = 2T = verhung oad (.) T = haft Torque (..) = of procket, inion or ulley (.) = oad onnection actor oad onnection actor procket or Timing elt inion and ear rive ulley and -elt rive ulley and lat elt rive n overhung load greater than permissible load value may be reduced to an acceptable value by the use of a sprocket, pinion or pulley or a larger. Relocation of the load closer to the center of reducer will also increase capacity. ermissible overhung loads and output shaft thrust loads are listed for each reducer in the tables on ages 0-. aximum nput peeds 7, 78, 72, R 70 through R T: orsepower ratings for 750 R should T be exceeded when operating at higher input speeds. Ratings shown reflect maximum gear capacity with lubersynth lubricant. The use of other lubricants may reduce ratings by up to 5%. Ratings are mechanical not thermal /7... oston ear

6 langed Reducer ssemblies and ounting ositions ssemblies /Q700 eries tandard assemblies define output shaft (slow speed) projection with respect to input shaft (high speed) and mounting surface. T Types and are horizontal bases. Types and are vertical high bases and Types and are vertical low bases. asic models and separate base kits are supplied unless otherwise specified. ssembly available at a slight additional charge. TY ee age 70 for complete ordering instructions. nput may rotate clockwise or counter clockwise. TY or other configurations not shown, contact factory. TY & TY & ounting ositions /Q /Q 700 eries tandard assemblies are for osition. The design permits any types of assembly to be mounted in any position shown by the proper location of the vented oil filler, level and drain plugs, at the time of installation. 4 R 2 or other than osition, order standard and relocate vented oil filler, level and drain plugs. ented oil filler plug must be located in the uppermost position. R R or all mounting positions where the vented filler plug is located in a horizontal plane, the vent hole must point upward. R or all mounting positions where the vented filler plug is located in a vertical plane, the vent hole must point toward center of housing. or production orders oston ear will assemble units for the specified mounting position desired at no additional charge. R: The lubricant will flow between the large gearbox and the small gearbox. hen filling with oil, make sure both gearboxes are full to the correct/same level. t is strongly recommended the oil level in each gearbox is verified after a short run. 5 6 ndicates proper oil level. R T hen ordering speed reducers pre-lubricated, the ounting osition must be indicated to ensure proper oil level. 72 oston ear /7

7 langed Reducer ssemblies and ounting ositions T ssemblies /Q700 eries tandard assemblies define output shaft (slow speed) projection with respect to input shaft (high speed) and mounting surfaces. Types is a horizontal base. Types and are vertical high bases and types and are vertical low bases. TY asic models and separate base kits are supplied unless otherwise specified. ssembly available at a slight additional charge. ee age 70 for complete ordering instructions. nput may rotate clockwise or counter clockwise. TY & or other configurations not shown, contact factory. TY & 4 R 2 ounting ositions /Q /Q 700 series tandard assemblies are for osition. The design permits any types of assembly to be mounted in any position shown by the proper location of the vented oil filler, level and drain plugs, at the time of installation. R R or other than osition, order standard and relocate vented oil filler, level and drain plug. ented oil filler plug must be located in the uppermost position. R or all mounting positions where the vented filler plug is located in a horizontal plane, the vent hole must point upward. 5 6 or all mounting positions where the vented filler plug is located in a vertical plane, the vent hole must point toward center of housing. R or production orders oston ear will assemble units for the specified mounting position desired at no additional charge. ndicates proper oil level. T hen ordering speed reducers pre-lubricated, the ounting osition must be indicated to ensure proper oil level. R: The lubricant will flow between the large gearbox and the small gearbox. hen filling with oil, make sure both gearboxes are full to the correct/same level. t is strongly recommended the oil level in each gearbox is verified after a short run /7... oston ear

8 on-langed Reducer ssemblies and ounting ositions ssemblies 700 eries tandard assemblies define output shaft (slow speed) projection with respect to input shaft (high speed) and mounting surfaces. Types and are horizontal bases. Types and are vertical high bases and types and are vertical low bases. asic models and separate base kits are supplied unless otherwise specified. ssembly available at a slight additional charge. T TY ee age 70 for complete ordering instructions. nput may rotate clockwise or counter clockwise. rrows indicate relative rotation. TY R TR RT T, TT TRY. TY & TY &.0050 ounting ositions 700 eries tandard assemblies are for osition. The design permits any types of assembly to be mounted in any position shown by the proper location of the vented oil filler, level and drain plugs, at the time of installation. 4 R 2 or other than osition, order standard and relocate vented oil filler, level and drain plug. R R ented oil filler plug must be located in the uppermost position. or all mounting positions where the vented filler plug is located in a horizontal plane, the vent hole must point upward. or all mounting positions where the vented filler plug is located in a vertical plane, the vent hole must point toward center of housing. or production orders oston ear will assemble units for the specified mounting position desired at no additional charge. R: The lubricant will flow between the large gearbox and the small gearbox. hen filling with oil, make sure both gearboxes are full to the correct/same level. t is strongly recommended the oil level in each gearbox is verified after a short run. R 5 6 ndicates proper oil level. R T.0047 hen ordering speed reducers pre-lubricated, the ounting osition must be indicated to ensure proper oil level. 74 oston ear /7

9 on-langed Reducer ssemblies and ounting ositions T ssemblies 700 eries tandard assemblies define output shaft (slow speed) projection with respect to input shaft (high speed) and mounting surfaces. Types is a horizontal base. Types and are vertical high bases and types and are vertical low bases. TY asic models and separate base kits are supplied unless otherwise specified. ssembly available at a slight additional charge. ee age 70 for complete ordering instructions. TY & nput may rotate clockwise or counter clockwise. rrows indicate relative rotation. R TR RT T, TT TRY. TY & ounting ositions 700 eries 4 R 2 tandard assemblies are for osition. The design permits any types of assembly to be mounted in any position shown by the proper location of the vented oil filler, level and drain plugs, at the time of installation. R R or other than osition, order standard and relocate vented oil filler, level and drain plug. R ented oil filler plug must be located in the uppermost position. or all mounting positions where the vented filler plug is located in a horizontal plane, the vent hole must point upward. 5 6 or all mounting positions where the vented filler plug is located in a vertical plane, the vent hole must point toward center of housing. R or production orders oston ear will assemble units for the specified mounting position desired at no additional charge. ndicates proper oil level. T hen ordering speed reducers pre-lubricated, the ounting osition must be indicated to ensure proper oil level. R: The lubricant will flow between the large gearbox and the small gearbox. hen filling with oil, make sure both gearboxes are full to the correct/same level. t is strongly recommended the oil level in each gearbox is verified after a short run /7... oston ear

10 700 eries Recommended ubricants The following table indicates the types and viscosity of lubricants suitable for reducers operating at various temperatures. ubrication and maintenance instructions are provided with each speed reducer. These instructions should be followed for best results. t is important that the correct types of oil be used since many oils are not suitable for the lubrication of gears. arious types of gearing require different types of lubricants. The lubricant must remain free from oxidation and contamination by water or debris, since only a very thin film of oil stands between efficient operation and failure. To assure long service life, the reducer should be periodically drained (preferably while warm) and refilled to the proper level with a recommended gear oil. nder normal environmental conditions oil changes are suggested after the initial 250 hours of operation and thereafter at regular intervals of 2500 hours or every 6 months. ynthetic lubricants will allow extended lubrication intervals due to its increased resistance to thermal and oxidation degradation. t is suggested that the initial oil change be made at 500 hours and, thereafter, at 5000 hour intervals. uring the initial period of operation, higher than normal operating temperatures may be seen. This is due to the initial break-in of the gear set. The temperature of ingle Reduction orm ear Reducers may reach approximately 225. mbient (Room) Temperature 20 to 225 ** ( 29 to 07 ) 0 to 225 ** ( 4 to 07 ) R R RR Recommended il (or equivalent) lubersynth 6-460* ynthetic "obil 64 ynthetic" iscosity 00 il Type iscosity rade o. 950/ / /460 R R RT R T R TY lubersynth obil 64 Z QRT QRT T T: Relubricate more frequently if drive is operated in high ambient temperatures or unusually contaminated atmosphere. igh loads and operating temperatures will also require more frequent lubrication. * ynthetic recommendation is exclusively for lubersynth ther lubricants corresponding to / numbers are available from all major oil companies. ee age 5 for lubricant interchange. ** The lubersynth lubricant will perform at temperatures considerably higher than 225. owever, the factory should always be consulted prior to operating at higher temperatures as damage may occur to oil seals and other components. ounting ositions or ouble Reduction odels nly The variety of mounting possibilities for double-reduction drives makes it impractical to illustrate positions for these models. n general, the vent filler is at the uppermost plug position, and the drain plug at the lowest possible position. The oil level must be at the approximate centerline of the uppermost gear, with the lower box completely full. The first and second reduction housings are open to one another allowing free flow of lubricant. evels should be checked frequently on new installation to assure proper levels are maintained. R: The lubricant will flow between the large gearbox and the small gearbox. hen filling with oil, make sure both gearboxes are full to the correct/same level. t is strongly recommended the oil level in each gearbox is verified after a short run. R: ifferent oil types should not be mixed. or example lubersynth is not compatible with obil oston ear /7

11 700 eries ouble Reduction utput R & apacity election 750 R nput utput R Ratio# utput Torque (lb.in.) on-langed Reducers ear apacity nput utput ize* otor earmotor ore ode otors** Ratings vailable tyles at. os. utput Torque (lb.in.) ervice lass Q Q 20/460 hase 60 z T T /4 / T T T T T /2 / /4 /2 / / T T T T T T T T-5/8 T T / T T-5/8 T / T T T / T T T T T T T /4 / T T T T.7 50 T / /4 /2 / / T T T T T T T / T T / T-5/8 T T * dd (for R T) or (for RT T) after in odel umbers. ee umbering ystem, age 70. ** Totally nclosed, an ooled. or complete motor atalog umbers and additional motors, see ages 4 and 46. haded areas denote which styles are available for a given center distance and ratio. # ther ratios avialable. ontact factory for information /7... oston ear

12 700 eries ouble Reduction utput R & apacity election 750 R nput utput R Ratio# 50 T 200 T 00 T utput Torque (lb.in.) on-langed Reducers ear apacity nput utput ize* otor -/2 2 -/2 5 2 /4 /4 /4 /2 / /4 /2 /4 /2 / / /2 earmotor ore ode otors** Ratings vailable tyles at. os. utput Torque (lb.in.) ervice lass * dd (for R T) or (for RT T) after in odel umbers. ee umbering ystem, age 70. ** Totally nclosed, an ooled. or complete motor atalog umbers and additional motors, see ages 4 and 46. haded areas denote which styles are available for a given center distance and ratio. # ther ratios avialable. ontact factory for information. /4 / /4 /2 / /4 /2 / Q Q /460 hase 60 z T T T T T T T T T T T T T T T T T T T T T T T T T-5/8 T T T T T-5/8 T T T T T T T T T T T T T T T T T T T 78 oston ear /7

13 700 eries ouble Reduction utput R & apacity election 750 R nput utput R Ratio# utput Torque (lb.in.) on-langed Reducers ear apacity nput utput ize* otor earmotor ore ode otors** Ratings vailable tyles at. os. utput Torque (lb.in.) ervice lass Q Q 20/460 hase 60 z / T-5/8 T T T /2 2 -/ T T T-5/8 T T T T T T T T T / T T T / /4 /2 / / T T T T T T /2 / T T T / T T-5/8 T / T T T T T T T T T /4 / T T T T / / T T T * dd (for R T) or (for RT T) after in odel umbers. ee umbering ystem, age 70. ** Totally nclosed, an ooled. or complete motor atalog umbers and additional motors, see ages 4 and 46. haded areas denote which styles are available for a given center distance and ratio. # ther ratios avialable. ontact factory for information /7... oston ear

14 700 eries ouble Reduction utput R & apacity election 750 R nput utput R Ratio# utput Torque (lb.in.) on-langed Reducers ear apacity nput utput ize* otor earmotor ore ode otors** Ratings vailable tyles at. os. utput Torque (lb.in.) ervice lass Q Q 20/460 hase 60 z /2 / / T T T T / T-5/8 T T / T T T T T T T T T T T /4 /2 / / T T T T T T /2 / T T T / T-5/8 T T T T T T T T T T / T T / / T T T /2 / T T T * dd (for R T) or (for RT T) after in odel umbers. ee umbering ystem, age 70. ** Totally nclosed, an ooled. or complete motor atalog umbers and additional motors, see ages 4 and 46. haded areas denote which styles are available for a given center distance and ratio. # ther ratios avialable. ontact factory for information. 80 oston ear /7

15 700 eries ouble Reduction utput R & apacity election 750 R nput utput R Ratio# utput Torque (lb.in.) on-langed Reducers ear apacity nput utput ize* otor earmotor ore ode otors** Ratings vailable tyles at. os. utput Torque (lb.in.) ervice lass Q Q 20/460 hase 60 z T /2 / T-5/8 T T T T T T to T /4 /2 / / T T T T T /2 / T T T T T T T T /2 / / T T T / T T T T / T T 000 T T T T / / T T T /2 / / T T T T T T * dd (for R T) or (for RT T) after in odel umbers. ee umbering ystem, age 70. ** Totally nclosed, an ooled. or complete motor atalog umbers and additional motors, see ages 4 and 46. haded areas denote which styles are available for a given center distance and ratio. # ther ratios avialable. ontact factory for information /7... oston ear

16 700 eries ouble Reduction langed Reducer imensions 700/Q700 eries langed Quill/langed oupling Types asic odels (o ase); arallel hafts R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (8) T T R TT Y TR /8-24 x 7/8 T 72 TR 760 ize 42Z T - ounting 80T 20 42Z Q700 40T 80T ize R- ounting T ow peed haft pprox. eight -ey (bs.) Tap Z 40T 80T ize epth -.00 q. ength Q orizontal ase it o / / / / / /4 -/ / /4-5/ / /4 2-/ / /6 2-7/ / /8 2-/ / /2 2-5/ / /2 -/ * ee ssemblies and ounting ositions, age 72. or ase its, see age 29. ote: or base dimensions see ingle Reduction langed Reducer imension pages. 82 oston ear /7

17 700 eries ouble Reduction langed Reducer imensions 700/Q700 eries langed Quill/langed oupling Types asic odels (o ase); arallel hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (8) T T TT Y (2) Q T TR 20 RT (T ) R T 72 & 78 Z Y ize 42Z ounting 40T Q700 42Z 40T ize Q R- ounting 42Z 40T Tap ize T ow peed haft pprox. eight ax -ey (.) epth q. ength Q # / # / / / ee age / / or / / ey nformation / / / / * ee ssemblies and ounting ositions, age 72. nput may be rotated clockwise or counterclockwise. ote: or base dimensions see ingle Reduction langed Reducer imension pages. ee age 28 for available bore sizes /7... oston ear

18 700 eries ouble Reduction langed Reducer imensions 700/Q700 eries langed Quill/langed oupling Types R osition ounting racket; arallel hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (2) T TR 20 RT (T ) R TT Y Y (4) T Q - ounting 700 Q700 ize 42Z 40T 42Z 40T # # / / / / / R- ounting ax ow peed haft -ey pprox. eight (.) T ize Q 42Z 40T oles ize ength Y Q / / / ee age / or / ey nformation / / * ee ssemblies and ounting ositions, age 72. ee age 28 for available bore sizes. nput may be rotated clockwise or counterclockwise. 84 oston ear /7

19 700 eries ouble Reduction langed Reducer imensions 700 eries langed Quill Type asic odels (o ase); arallel hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries ages R RT RT, ee ages 7, (8) T T TT Y R RT T (2) Q T TR 20º RT Y TY** 72 Z Y ize /8-24 x /2 T ounting 42Z 40T + + T TR T + TR ize Q R- ounting 42Z 40T Tap ize T ow peed haft pprox. eight -ey (.) epth q. ength # / ee age / / or / / ey nformation / / ** ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft and mounted surfaces. nput may be rotated clockwise or counterclockwise. ote: or base dimensions see ingle Reduction langed Reducer imension pages. ee ssemblies and ounting ositions, age 72. Reaction Rod its TR ize atalog umber it o ll hardware shown is included in the kits. /6 5/6 2 5/8 /6 0 5/ /2 (2) /7... oston ear

20 700 eries ouble Reduction langed Reducer imensions 700 eries langed Quill Type osition ounting lange; arallel hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries ages R RT RT, ee ages 7, Y TY** * () Q T TR 20º RT R TT Y + + T TR T TR R T T. (4) T. /8-24 x /2 T 72 Z Y ounting ize. 42Z 40T R- ounting ow peed haft -ey pprox. eight (.) T ize Q 42Z 40T oles ize ength # / ee age / / or / / ey nformation / / *ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft. ee ssemblies and ounting ositions, age oston ear /7

21 700 eries ouble Reduction langed Reducer imensions 700/Q700 eries langed Quill/langed oupling Types asic odels (o ase); Right ngle hafts R RR RT, see age 56. R RT RT, ee ages 7, Y TY* TR ize 42Z T - ounting 80T 20 42Z Q700 40T 80T ize R- ounting T ow peed haft pprox. eight -ey (.) 80T Tap Z 40T 20 ize epth -.00 ertical ase it o. q. ength Q igh ow / / / / /4 -/ / /4-5/ / /4 2-/ / /6 2-7/ / /8 2-/ / /2 2-5/ / /2 -/ * ee ssemblies and ounting ositions, age 7. or ase its, see age /7... oston ear

22 700 eries ouble Reduction langed Reducer imensions 700/Q700 eries langed Quill/langed oupling Types asic odels (o ase); Right ngle hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (2) T TR 20 RT (T ) (8) T T TT Y R T 72 & 78 Z Y ize 42Z - ounting 40T 42Z Q 40T # # / / / / / ize R- T ow peed haft pprox. ounting ax -ey eight (.) 42Z 40T Tap ize epth ize ength Q / / / ee age / or / ey nformation / / * ee ssemblies and ounting ositions, age 7. ote: or base dimensions see ingle Reduction langed Reducer imension pages. ee age 28 for available bore sizes. 88 oston ear /7

23 700 eries ouble Reduction langed Reducer imensions (2) Q T TR 20 RT (T ) 700/Q700 eries langed Quill/langed oupling Types R/ osition ounting racket; Right ngle hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, R TT Y Y TY* T 72 & 78 Z Y (4) T R osition TT Y (2) Q T TR 20 RT (T ) R (4) T T 72 & 78 Z Y osition ize - ounting Q R odel /7... oston ear odel 42Z 40T 42Z 40T R- ounting ax ow peed haft -ey pprox. eight (.) ize Q 42Z 40T T oles ize ength Q # / # / / / ee age / / or / / ey nformation / / / / * ee ssemblies and ounting ositions, age 7. ee age 28 for available bore sizes.

24 700 eries ouble Reduction langed Reducer imensions 700 eries langed Quill Type asic odels (o ase); Right ngle hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries ages R RT RT, ee ages 7, Y TY** * + (2) T TR 20 RT (8) T T R TT Y /8-24 x /2 T T R + + T TR T RT T 72 Z Y 4.94 ize - ounting 42Z 40T # / / / ize R- ounting 42Z 40T Tap ize T ow peed haft pprox ey eight (.) epth ize ength / ee age / or / ey nformation / *ee ssemblies and ounting ositions, age 7. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft. /6 5/6 Reaction Rod its 0 5/ TR ize atalog umber it o ll hardware shown is included in the kits. 2 5/8 /6 /2 (2) 90 oston ear /7

25 700 eries ouble Reduction langed Reducer imensions 700 eries langed Quill Type / osition ounting lange; Right ngle hafts; ollow utput osition (2) T TR 20º RT R TT Y R RR RT, see age 56. R T Z, ee the eries age R RT RT, ee ages 7, Y TY* RT T (4) T.. /8-24 x /2 T + TR osition TT Y (2) T TR 20º RT 72 Z Y 4.94 TR + + T TR T. (4) T. R RT T - ounting Z 42Z 40T # / / / R- ounting ow peed haft -Y pprox. eight (.) T Z 42Z 40T ole ize ength / / ee age / or / ey nformation 28 * ee ssemblies and ounting ositions, age 7. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft /7... oston ear

26 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); arallel hafts R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (8) T T TT Y T Y Z TR /8-24 x 7/8 T 72 TR 760 Y Z ow peed haft igh peed haft T Y Z-Y pprox. eight orizontal ase ize Tap ize epth -.00 q ength -.00 Y q ength (bs.) it o / / /2 / / / /2 / / /4 -/ /8 5/ / /4-5/ /8 5/ / /4 2-/ /6 / / /6 2-7/ /6 / / /8 2-/ /6 / / /2 2-5/ / / /2 -/ / * ee ssemblies and ounting ositions, age 74. or ase its, see age 29. ote: or base dimensions see ingle Reduction langed Reducer imension pages. 92 oston ear /7

27 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); arallel hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, (8) T T TT Y (2) T TR 20 RT (T ) Y TY* T Y Z T 72 & 78 Z Y R Y Z # # / / / / / ize R ow peed haft igh peed haft T ax -Y Z-Y Tap ize epth q ength -.00 Y q ength / /2 / / /2 / / ee age /8 5/ / or /8 5/ / ey nformation /6 / / /6 / / /6 /6 66 * ee ssemblies and ounting ositions, age 74. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. ee age 28 for available bore sizes. pprox. eight (bs.) /7... oston ear

28 700 eries ouble Reduction on-langed Reducer imensions 700 eries R osition ounting racket; arallel hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, (2) R T TR 20 RT (T ) T Y Z TT Y Y T 72 & 78 Z Y (4) T Y TY* ize ize R T ax ow peed haft igh peed haft -Y Z-Y q ength -.00 Y q ength 7 # / /2 / #0-2.8 / /2 / / / ee age /8 5/ / / or /8 5/ / / ey nformation /6 / / / /6 / / / /6 /6 48 * ee ssemblies and ounting osition, age 74 nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. ee age 28 for available bore sizes. pprox. eight (bs.) 94 oston ear /7

29 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); arallel hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries age R RT RT, ee ages 7, (8) T T TT Y RT T (2) T TR 20º RT T Y Z Y TY* + R Y /8-24 x /2 T + + T TR T TR ize # / / / ize R ow peed haft igh peed haft T -Y Z-Y Tap ize epth q ength -.00 Y q ength / ee age /2 / / or /8 5/ / ey nformation /8 5/ / /6 /6 9 * ee ssemblies and ounting ositions, age 74. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft and mounted surfaces, viewed from end of input shaft. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. pprox. eight (bs.) ote: or base dimensions see ingle Reduction langed Reducer imension pages. Reaction Rod its Z atalog umber it o TR / /6 5/8.9 ll hardware shown is included in the kits. 2 5/8 /6 /2 (2) /7... oston ear

30 700 eries ouble Reduction on-langed Reducer imensions 700 eries osition ounting lange; arallel hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries age R RT RT, ee ages 7, Y TY* (2) T TR 20º RT Y T Y Z TT Y ++ + T TR T TR RT T. (4) T. /8-24 x /2 T ize # / / / ow peed haft igh peed haft -Y Z-Y pprox. ize T ia q ength Y q ength eight (bs.) 78.8 / ee age /2 / / or /8 5/ / ey nformation /8 5/ / /6 /6 20 * ee ssemblies and ounting osition, age 74. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft and mounted surfaces, viewed from end of input shaft. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. /6 Reaction Rod its TR atalog ize umber it o / /6 2 5/8 /6.9 /2 (2) ll hardware shown is included in the kits. 96 oston ear /7

31 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); Right ngle hafts R RR RT, see age 56. R RT RT, ee ages 7, (8) T T T Y Z Y TY* Y TR /8-24 x 7/8 T 72 TR 760 TT Y Z ize Tap ize T ow peed haft igh peed haft ertical ase Y Z-Y pprox. eight it o. epth -.00 q ength -.00 Y q ength (.) igh ow 7 5/ / /2 / / / /2 / / /4 -/ /8 5/ / /4-5/ /8 5/ / /4 2-/ /6 / / /6 2-7/ /6 / / /8 2-/ /6 / / /2 2-5/ / / /2 -/ / * ee ssemblies and ounting ositions, age 75. or ase its, see age /7... oston ear

32 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); Right ngle hafts; ored to ize ollow utput R RR RT, see age 56. R RT RT, ee ages 7, Y TY* (2) R T TR 20 RT(T ) (8) T T TT Y T Y Z Y T 72 & 78 Z Y ize R # # / / / / /6-24 ize ow peed haft igh peed haft T ax -Y Z-Y Tap ize epth q ength -.00 Y q ength / /2 / / /2 / / ee age /8 5/ / or /8 5/ / ey nformation /6 / / /6 / / /6 /6 66 * ee ssemblies and ounting ositions, age 75. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. ee age 28 for available bore sizes. pprox. eight (bs.) 98 oston ear /7

33 R osition 700 eries ouble Reduction on-langed Reducer imensions (2) R T TR 20 RT (T ) 700 eries R/ osition ounting racket; Right ngle hafts; ored to ize ollow utput TT Y T Y Z Y R RR RT, see age 56. R RT RT, ee ages 7, Y TY* T 72 & 78 Z Y (4) T Q (2) R T TR 20 RT (T ) TT Y T Y Z Y (4) T T 72 & 78 Z Y osition Q ize R odel odel ow peed haft igh peed haft ax -Y Z-Y pprox. ize Q R T ia q ength Y q ength eight (bs.) 7.62 # / /2 / #0-2.8 / /2 / / / ee age /8 5/ / / or /8 5/ / / ey nformation /6 / / / /6 / / / /6 /6 48 * ee ssemblies and ounting ositions, age 75. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. ee age 28 for available bore sizes /7... oston ear

34 700 eries ouble Reduction on-langed Reducer imensions 700 eries asic odels (o ase); Right ngle hafts; ollow utput R RR RT, see age 56. R T Z, ee the eries age R RT RT, ee ages 7, Y TY* + (2) R T TR 20 RT (8) T T TT Y T Y Z + + T TR T TR RT T Y /8-24 x /2 T ize R # / / /6-24 ow peed haft igh peed haft T -Y Z-Y pprox. ize Tap ize epth q ength Y q ength eight (bs.) / ee age /2 / / or /8 5/ / ey nformation /8 5/ / /6 /6 9 * ee ssemblies and ounting ositions, age 75. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft and mounted surfaces, viewed from end of input shaft. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation. /6 5/6 Reaction Rod its 0 5/ TR Z atalog umber it o ll hardware shown is included in the kits. 2 5/8 /6 /2 (2) 00 oston ear /7

35 700 eries ouble Reduction on-langed Reducer imensions 700 eries / osition ounting lange; Right ngle hafts; ollow utput osition R RR RT, see age 56. R T Z, ee the eries age R RT RT, ee ages 7, (2) R T TR 20º RT T T Y Z TT Y Y TY* Y RT T (4) T.. ++ TR osition T (2) R T TR 20º RT TT Y T Y Z /8-24 x /2 T Y TY* TR + Y. (4) T. RT T + T TR T. Z odel /7... oston ear odel ize R T ia ow peed haft igh peed haft -Y Z-Y q ength -.00 Y q ength 78 #0-2.8 / ee age /2 / / / or /8 5/ / / ey nformation /8 5/ / / /6 /6 20 pprox. eight (bs.) * ee ssemblies and ounting ositions, age 75. ssemblies define output (slow speed) shaft projection with respect to input (high speed) shaft and mounted surfaces, viewed from end of input shaft. nput may be rotated clockwise or counterclockwise. rrows indicate relative rotation.

36 otes 02 oston ear /7