Torque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
|
|
- Hilary Hines
- 5 years ago
- Views:
Transcription
1 Torque Torque Sensor ini-smart Torque Sensor torque sensors operate on the strain gage principle and supply an analog output signal of ± V which is contactless transferred. vailable also with integrated rotational angle/speed measurement. Smart (integral measuring electronics) nterference resistance due to active torque output (±5 V), electrically isolated from supply and measuring signal Non-contact signal transfer Unipolar supply ighly responsive to dynamic peaks aintenance-free Standardized mechanical connections: 1/4" hex socket N3126 Square socket (size depending on measuring ) ylindrical shaft ends xtremely compact Suitable for pulse tool operation ptional rotational angle measurement escription The ini-smart torque sensor uses strain gage technology. The torque signal is transmitted from the rotating shaft via frequency modulation and is processed as an analog signal. Version / Version Q/Q The rotational angle signal with two tracks of each 360 pulses per revolution and track is available as TTL-signal. n external electrical control input is standard. Version R/R pplication The ini-smart torque sensor with rotating measuring shaft is suitable both for dynamical detection of starting torque and breakway torque for bolting and assembly techniques and for quality assurance in production and laboratory. 4502_ e ue to its standardized connections the device can be quickly adapted to air, electronic and pulse tools. Version RU TS Page 1/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
2 Torque Sensor ini-smart Torque Sensor, Technical ata echanical asic ata easuring ±0, Rated torque nom 0, verload capacity Service torque 1,5 x nom Limiting torque 1,5 x nom Rotational angle/- speed measurem. pulses/ 2x360, (Version Q,, R, RU) revolut. 90 displaced, TTL Nominal speed 18 1/min /min /min Version Q,, R, RU 1/min (rotational angle measurement) ousing material nodized aluminum Protection class P40 General lectrical Specifications ut-off frequency 3 d kz 3 ccuracy class 0,2 Linearity error including hysteresis % S <±0,2 utput signal V ± at rated torque (rated value) V 5 Load resistance kω >10 Temp. influence on the zero point % S/ <±0,015 Temp. influence on the nominal value % S/ <±0,015 ontrol signal % 100 ±0,2 100 % control input V "n" "ff" perating temperature (Rated temperature ) Service temperature Storage temperaure lectrical connection 12 pin built-in connector Supply voltage V Power consuption W <1 4502_ e Page 2/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. TS esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
3 Torque Sensor ini-smart Torque Sensor, imensions Torque sensor with standard square socket connection Version Q With rotating shaft rive - square socket utput - square drive = easuring end G 4x6 (6x) 4x6 (3x) Version Q, Version Q, N N Table Version Q Threads for mounting: 4, 6 mm depth easuring Square size G øl øn xial Q 6 1/4" , Q 12 1/4" , Q 18 1/4" , Q 25 3/8" 74, * Q 50 3/8" 74, * Q 63 3/8" 74, * Q 100 1/2" ,5 * Q 150 1/2" ,5 * Q 160 1/2" ,5 * Q 250 3/4" * Q 300 3/4" * Q 500 3/4" * k0Q " ,5 34,5 * 5 28, , _ e ngle of twist nom nertia easuring end rive end Q Q ,55 0,0121 0,0157 0, Q ,85 0,0121 0,0157 0, Q Q ,32 0,043 0,0843 0, Q ,4 0,043 0,0843 0, Q ,48 0,051 0,086 0, Q ,61 0,051 0,086 0, Q ,65 0,051 0,086 0, Q ,21 0,465 0,758 0, Q ,25 0,465 0,758 0, Q ,4 0,465 0,758 0, k0Q ,31 1,38 2,05 1,57 TS Page 3/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
4 Torque Sensor ini-smart Torque Sensor, imensions Torque sensor with standard square socket connection Version Q With rotating shaft rive - inside square socket utput - external square drive Rotational angle measurement = easuring end G 4x6 (6x) G K Version Q, Version Q, N N Table Version Q (with rotational angle measurement) Threads for mounting: 4, 6 mm depth easuring Square size G K øl øn xial Q 12 1/4" , Q 18 1/4" , Q 50 3/8" , Q 63 3/8" , Q 100 1/2" , Q 150 1/2" , Q 160 1/2" , Q 250 3/4" Q 300 3/4" Q 500 3/4" k0Q " ,5 57, _ e ngle of twist nom nertia easuring end rive end Q ,55 0,013 0,0157 0, Q ,85 0,013 0,0157 0, Q ,47 0,055 0,11 0, Q ,59 0,055 0,11 0, Q ,6 0,069 0,1 0, Q ,85 0,069 0,1 0, Q ,9 0,069 0,1 0, Q ,23 0,68 1,0 1, Q ,27 0,68 1,0 1, Q ,45 0,68 1,0 1, k0Q ,45 2,45 3,25 2,48 TS Page 4/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
5 Torque Sensor ini-smart Torque Sensor, imensions = easuring end Torque sensor with standard 1/4" hex N3126 form /, Version or With rotating shaft rive - hex shaft utput - hex socket Rotational angle measurement (Version ) Quick action chuck _ e x6 (6x) 1/4" 37 Version /, 0, /4" Table Version or (with rotational angle measurement) Threads for mounting: 6x 4, 6 mm depth easuring xial 45020,5,... 0, , , , , ngle of twist nom nertia easuring end rive end 45020,5, ,16 0,0134 0,0193 0, , ,32 0,0134 0,0193 0, , ,44 0,0135 0,0194 0, , ,68 0,0137 0,0216 0, , ,0 0,0140 0,0248 0, , ,5 0,0140 0,0248 0,21 TS Page 5/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
6 Torque Sensor ini-smart Torque Sensor, imensions = easuring end Torque sensor with shaft end, Version R or R With rotating shaft Rotational angle measurement (Version R) G 4x6 (6x) Version R/R, x6 (3x) G 4x6 (8x) 22 Version R, and K Version R, 20 and Table Version R or R (with rotational angle measurement) Threads for mounting: 4, 6 mm depth eas. ** With feather keyways (2x180 ) according to N6885 xial øl 1 K G N g R,...R , shaft R,...R , shaft R,...R , shaft R,...R , shaft R , K** R , K** R K** R K** _ e ngle of twist nom nertia easuring end rive end R,...R 317 0,17 0,0146 0,0147 0, R,...R 317 0,36 0,0146 0,0147 0, R,...R 855 0,34 0,015 0,015 0, R,...R 855 0,67 0,015 0,015 0, R ,21 0,061 0,073 0, R ,3 0,062 0,075 0, R ,21 0,9 1,02 0, R ,35 0,91 1,04 0,4 Page 6/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. TS esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
7 Torque Sensor ini-smart Torque Sensor, imensions Torque sensor with shaft end and separate mounting base, Version R With rotating shaft Rotational angle measurement Shaft ends each with two keyways in accordance with N 6885 X W U Y T V = easuring end ØG J K ØG Z P Q L 4502_ e L N Table Version R (with rotational angle measurement) easuring øg J K L N P g R , , R , , R , k0R , ption mounting base easuring xial Q T U V W X Y Z P9 P R x R x R x k0R x easuring ngle of twist nom nertia Weight mounting base kg easuring end rive end R ,2 0,665 0,605 1,13 1, R ,25 0,68 0,62 1,13 1, R ,22 3,2 2,63 2,84 1, k0R ,33 3,21 2,67 2,84 1,23 Page 7/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. TS esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
8 Torque Sensor ini-smart Torque Sensor, imensions Torque sensor with shaft end and integral mounting base, Version RU This version can be used as functional check on tilt procedure or rotation monitoring Variable mounting positions, applications for left and right hand torque readings as well as the static and dynamic conditions are possible ll RU type sensors have an integrated rotational angle measurement = easuring end 4502_ e Ø 14 J L J Ø N 10 P9 Table Version RU (with rotational angle measurement) easuring xial ø J L N Size g RU RU RU RU RU RU easuring ngle of twist nom nertia easuring end rive end RU ,17 0,0146 0,0147 0, RU ,36 0,0146 0,0147 0, RU ,34 0,015 0,015 0, RU ,67 0,015 0,015 0, RU ,25 0,062 0,061 0, RU ,35 0,064 0,063 0,78 TS Page 8/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
9 Torque Sensor ini-smart Torque Sensor, lectrical onnections Pin llocation of the 12 Pin uilt-in onnector unction PN escription Supply +U V, power consumption <1 W GN Ground relating to U and angle of rotation pulses Shield n sensor connected to housing U ±5 V at nom at >2 kω Torque output 5 V at control signal activation Ri, = 10 Ω, output short circuit proof relating to GN GN Ground relating to U ngle of rotation sensor Supply +U 5 V ngle of rotation pulses Track pen collector output nternal 1 kω resistance to 5 V (pull up), TTL-level G Track s Track, 90 displaced 100 % control input K ontrol ff: V n: V KGN Ground relating to control input J Not connected 4502_ e Page 9/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. TS esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
10 Torque Sensor ini-smart Torque Sensor, ncluded ccessories None rdering Key 4502 ptional ccessories /rt. No. ounting base, for Version R KS s ounting base, for Version R KS s emale connector with solder eye 12 pin KS onnection cable, 5 m, 12 pin open ends KS onnection cable, 2,5 m, 12 pin oo Torque KS ,5 mplifier for strain gage sensors ndividual pplication The diverse model guarantees user-friendly application such as tool calibration or in test stands with or without mounting base. easuring Ranges in / Possible Versions 0,5 0,5 1 R R RU R R RU R R RU R R RU Q Q Q Q R R RU Q Q R R RU Q Q Q Q R Q Q Q Q R Q Q Q Q Q Q R Q Q R 1k0 ouplings , or pplication xample Power tool control Versions (Note ependence with easuring Range) Square socket Q Square socket with rotational angle meas. Q 1/4" hex socket 1/4" hex socket with rotational angle meas. Rotating shaft R Rotating shaft with rotational angle meas. R Rotating shaft with rotational angle meas. RU and integral mounting base rder example: _ e Torque sensor: rated torque 18 : 018, Version : 1/4" hex socket with angle measurement Page 10/8 Tel , ax , info@kistler.com, Kistler is a registered trademark of Kistler olding G. TS esstechnik Schaffhausen Gmb ühlenstrasse 4, Stein am Rhein, Telefon , Telefax , info@mts.ch essen Prüfen utomatisieren
Torque Sensor. Torque. Mini-Smart Torque Sensor. Type 4502A...
Torque Torque Sensor ini-smart Torque Sensor 4502... 4502... torque sensors operate on the strain gage principle and supply an analog output signal of ±0... 5 V which is contactless transferred. vailable
More informationType 4502A... torque sensors operate on the strain gage principle and supply an
R5 4502 PPT Smart (integral measuring electronics) nterference resistance due to active torque output (±5 V), electrically isolated from supply and measuring signal on-contact signal transfer Unipolar
More informationTM 301 TM 308 In-Line Torque Transducers
ata Sheet In-Line Torque Transducers Features Integrated Torque and Speed onditioning Torque Range: 0.1 N m to 20 N m (0.07 lb ft to 15 lb ft) ccuracy: < 0.1% Overload apacity: 200% Overload Limit: 400%
More informationKiTorq Stator. Torque. Torque Evaluation Unit (Stator) for a Torque Measuring Flange. Type 4542A...
Torque KiTorq Stator Type A... Torque valuation Unit (Stator) for a Torque Measuring Flange KiTorq Stator Type A... for supplying power to and capturing measurement data from torque measuring units in
More informationMAGTROL. TF Series Torque Flange Sensor. TF data sheet FEATURES. DESCRIpTION. AppLICATIONS
data sheet Series Torque Flange Sensor FETURES Complete torque measuring system consisting of: Measuring flange with signal amplifier HF transmitter Conditioner 4 m coaxial cable Contactless signal transmission:
More informationKiTorq Rotor. Torque. Torque Measuring Unit (Rotor) for a Torque Measuring Flange. Type 4550A...
Torque KiTorq Rotor Type 4550... Torque Measuring Unit (Rotor) for a Torque Measuring Flange KiTorq Rotor Type 4550... for measuring highly dynamic torques. Combinations of various rotors and stators Transmission
More informationInstruction Manual Basic Line Torque Sensor Type 4520A...
Instruction Manual Basic Line Torque Sensor Type 4520A... ä 4520A_002-515e-01.14 Instruction Manual Basic Line Torque Sensor Type 4520A... ä 4520A_002-515e-01.14 Foreword Foreword This manual applies
More informationTM 314 TM 317 In-Line Torque Transducers
ata Sheet In-Line Torque Transducers TURS Integrated Torque and Speed onditioning Torque Rating: 1000 to 10,000 m (737 to 7375 lb ft) ccuracy: < 0.1% (depending on model) Overload apacity: 200% Overload
More informationVR61, 3/2, 2 x 3/2, 5/2 or 5/3 Solenoid and pilot actuated spool valves
V6, /, x /, 5/ or 5/ > > ort size: /4 (S /T) > > igh flow rate > > roven sealing system using erion experience in the chemical and process industry > > aintenance-free > > ptional manual overrides > >
More informationGeneral Characteristics
from 63 to 31 lbs_037_b he solution for > ain switchboard > Distribution panel > mergency switching > us tie unction he L ensures making and breaking on load and security breaking of any low voltage electrical
More informationPiezoresistive Pressure Sensors
Pressure Piezoresistive Pressure Sensors for utomotive R&, Test pplications Type 4260 4262 versatile high performance pressure sensor that will operate in harsh test environments where temperature extremes,
More informationVR61 and VR62 3/2, 2 x 3/2, 5/2 and 5/3 directional control solenoid and pilot valves 1/4 or 3/8
V6 and V6 /, x /, 5/ and 5/ directional control solenoid and pilot valves / or /8 igh flow rate roven sealing system using erion experience in the chemical and process industry aintenance-free ptional
More informationLinear Position Technology EZ-track
Rugged Rod Style Housings: Transducers designed to survive in harsh industrial environments to reduce downtime on the plant floor. The R10 housing, sensing rod and components are designed and constructed
More informationRoaDyn S: Multi-Component Test Stand Hubs
RoaDyn S: Multi-Component Test Stand Hubs For Durability Testing RoaDyn S625 nsp: 6-Component Measuring Hub for Cars Type 92662 Measuring range F x kn 20... 20 F y kn 15... 15 F z kn 20... 20 M x kn m
More informationBase Mounted Clutch/Brake Combinations in a Rugged Housing
lectro Pack ase ounted lutch/rake ombinations in a Rugged ousing P Series eets electrical codes U isted or S ertified. eavy duty bearings Properly aligned for maximum performance. rake output shaft lutch
More informationEP Series Electro Pack
P Series lectro Pack ase ounted lutch/rake ombinations in a Rugged ousing T UTOO T eets electrical codes U isted eavy duty bearings Properly aligned for maximum performance. rake output shaft lutch input
More informationPiezoresistive pressure transmitters
Pressure Piezoresistive pressure transmitters for Test & Measurement applications Type 4260... 4262... versatile high performance pressure transmitter that will operate in harsh test environments where
More informationDimensions / Technical Data / Order Codes
Fluid Level / Temperature Indicators / / rder odes Level Gauge SN D Design of Scale Plates Thermometer ptions apillary Tube Thermometer with a dual elsius / Fahrenheit scale up to +80 / +80 F L3 YUR LG
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationHTTF Transit Time Ultrasonic Flow Meter
Installation onsiderations imensional Specifications 1. Select the optimum mounting location on the piping system a full pipe with at least 10 straight pipe diameters upstream and 5 pipe diameters downstream
More informationL1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
More informationFor advanced drive technology DATAFLEX. Torque measuring shaft DATAFLEX
DATAFLEX Torque measuring shaft DATAFLEX 263 The principle: Torque measurement at low cost DATAFLEX measures torques without contact or radio frequency, is maintenance-free and has a high frequency of
More informationbetter measurement Simply a question of
Simply a question of better measurement SCHMIDT Flow Sensor SS 2.415 and SS 2.515 The tried and tested measurement experts for the monitoring of laminar flows extremely precise and quickly installed Industrial
More informationLoad Cells SIWAREX WL280 RN-S SA
Siemens G 2015 SIWREX WL280 RN-S S Load cell Overview Design The measurement element is a ring torsion spring made of stainless steel. Two strain-gage spirals (DMS) are applied to the upper and lower faces
More informationProduct Data Sheet. Positive Displacement Flow Meter B1750 DESCRIPTION
ESRIPTION Positive isplacement Flow Meter 175 The lancett Model 175 positive displacement flow meter provides high measurement accuracy, trouble-free operation and long service life for fluids over a wide
More informationPoppet Valves How to Order... 3
Table of ontents Poppet Valves...-0 ow to rder.... N Series - Solenoid Pilot ctuated...4-8 /8" to /8" Technical ata... 4 /8 to /8 imensions.... 5 /" to -/" Technical ata.... 6 / to -/ imensions... 7-8
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More informationFlowmeter F I Gardex. Connection and installation instructions. Application. Benefits. Design and mode of operation
The baffle plate (b) causes a back-pressure in the medium, and the balance beam (c) is deflected. This movement is transmitted via the beam to the indicator mechanism (e) using a bellows bushing (d). gear
More informationSpiraflo Steam flowmeters
Spiraflo Steam flowmeters Using a Spiraflo steam meter from Spirax Sarco will enable you to measure steam use accurately under all load conditions. It will provide vital information on usage and associated
More informationDurco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationMultifunction digital thermostat TER-6
78-0-00 Rev.: Multifunction digital thermostat Thank you for purchasing this device. Your reward will be high technical and functional qualities of the device. ontents page. Before you start. haracteristics
More informationDTC C0210/33 RIGHT REAR SPEED SENSOR CIRCUIT DTC C0215/34 LEFT REAR SPEED SENSOR CIRCUIT
05998 IAGNOSTICS ELECTRONICALLY CONTOROLLE RAKE SYSTEM TC C010/33 RIGHT REAR SPEE SENSOR CIRCUIT 05IZC01 TC C015/34 LEFT REAR SPEE SENSOR CIRCUIT CIRCUIT ESCRIPTION Refer to TC C000/31, C005/3 on page
More informationInstruction Manual. Rotating Torque Sensor Type 4501A. Version Q/QA (with standard square connections) Version R (with shaft ends)
Instruction Manual Rotating Torque Sensor Type 4501A Version Q/QA with standard square connections) Version R with shaft ends) Version H/HA with standard hexagon connections) 4501A_002-406e-01.14 Instruction
More information9301B 9311B 9321B 9331B 9341B 9351B 9361B 9371B
Force Quartz Force Links for Measuring Dynamic and Quasistatic Tensile and Compression Forces The Force Link is used to measure dynamic or quasistatic tensile or compression forces. It has a high rigidity
More informationSingle Socket and Horizontal Metering
G nergy onnections Single Socket and orizontal Metering T Approved Single Socket Metering T Approved Application Information G s Single Socket Metering products are designed for residential use. They are
More informationHEPA terminal filter units Ceiling diffusers: F640, F650, F654, F655, F656, F659, F660 Wall grilles: F670
HPA terminal filter units eiling diffusers: 60, 650, 65, 655, 656, 659, 660 Wall grilles: 670 or critical air purity and hygiene requirements Used in medicine, biology, pharmaceuticals, and sensitive technical
More informationFlame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.
is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening
More informationProduct Information / Order Code
Product Information / Order ode Order odes eries and Type low onitoring ystem G - 0.04 - - 1 - V - X G Version 0,002... 2 l/min / 0.0005... 0.53 U GP 0.02 0,004... 4 l/min / 0.0011... 1.06 U GP 0.04 0,01...
More informationAmphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB
ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationMore Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
More informationTemposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors M-Series Document Part Number 551218 Revision D Temposonics MT Measuring length 50-1500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationREVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
More information8.0 to 45.0cm 3 /rev 21MPa
PVS SRS VR VU PST PUP PVS Series Variable Volume. to.cm /rev Pa ischarge esign o. is applied on PVS- to make the pump more compact and lighter, and reduce noise. Production of PVS- has been discontinued.
More informationTemposonics. Magnetostrictive Linear Position Sensors. MHRM Analog Data Sheet. For embedded or externally threaded installation
Temposonics ostrictive Linear Position Sensors MHRM Analog For embedded or externally threaded installation Sensor rod with Ø 7 mm or Ø 0 mm Resolution: ±0. mm typ. Compliant with EN 50-3- MEASURING TECHNOLOGY
More information700 Series Double Reduction Worm Gear Reducers
700 eries ouble Reduction orm ear Reducers ection ontents roduct Reference uide... 68 umbering ystem / ow to rder... 68-7 election rocedure.... 7 ssemblies and ounting ositions... 72-75 Recommended ubricants...
More informationStandard Motor Cable K High-Flex Motor Cable KS Robot Motor Cable KR
Motor ccessories Motor cables are available for linear motors with the designation K, KS, and KR for stationary installation, installation in cable chains, and for robot applications. LinMot motor cables
More informationTorque measuring. Types and operating description 310
308 Torque measuring technology Torque measuring shafts Types and operating description 310 Type 16/10, 16/30, 16/50 312 Type 32/100, 32/300, 32/500 314 Type 42/1000 316 Type 70/3000, 70/5000 318 Type
More informationPIN LOAD CELL TYPE PR
Applications: The pin type load cell model PR is mainly foreseen for applications on cranes weighing systems or, in general, where the load applied on a pin have to be measured. Some applications are:
More informationModel DCT Digitally Compensated Pressure Transducer
EPMP 1 Product ata ELECTRONIC PRESSURE MESUREMENT PROUCTS Model CT igitally Compensated ESCRIPTION The Model CT is designed for general industrial and commercial requirements offering excellent performance
More informationTOX -Powerpackage X-KT-System
TO -Powerpackage -KT-System The pneumohydraulic split system ata sheet 0.05 08 / 06 TO GmbH & Pressotechnik o. KG Riedstrasse 8850 Weingarten / Germany Find your local contact at: TO -Powerpackage -KT-System
More informationH-TLC Adjustable Torque Limiters. Torq-Tender Mechanical Torque Limiters
Torq-Tender echanical Torque imiters -TC djustable Torque imiters Torq-Tenders... For ccurate verload Protection n echanical Power Transmission Systems Torq-Tenders are positive drive couplings which provide
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationTM 300 Series. In-Line Torque Transducers. User s Manual
TM 300 Series In-Line Torque Transducers User s Manual Purchase Record Please record all model numbers and serial numbers of your Magtrol equipment, along with the general purchase information. The model
More information411BAM Battery Auctioneering Module
uctioneering Module Introduction The is designed to act as a central component of a small system. It can measure the voltage and current of two separate banks, up to 100. It provides three outputs, auctioneered
More informationbetter measurement Simply a question of
Simply a question of better measurement SCHMIDT Flow Sensor SS 2.415 and SS 2.515 The tried and tested measurement experts for the monitoring of laminar flows extremely precise and quickly installed Industrial
More information3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer
3-way servo solenoid valves, cartridge type, pilot operated, with inductive position transducer Type 3WRCB 25...50 Nominal size (NG) 25, 32, 50 Unit series 1X Maximum working pressure P, A, T, X, Z 315
More informationADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability
DR175/240 Series Mechanical-Bearing Rotary Stage Direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding error motions Direct coupled, high-accuracy rotary encoder
More informationCars, The high measuring accuracy of the precision load cells is retained during transmission, since digitization takes place on the wheel to
Force SUNSTAR 传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 E-MAIL: RoaDyn S630 sp Wheel Force Transducer (WFT) for Passenger Cars Wheel force transducer for measuring three forces and three moments
More informationDRIVE MODE SYSTEM SECTION DMS CONTENTS CRUISE CONTROL & DRIVER ASSISTANCE DMS-1. Infiniti Drive Mode Selector BASIC INSPECTION...
RUS OTRO & RVR SSST STO S RV O SYST OTTS nfiniti rive ode Selector nfiniti rive ode Selector... 8 SYST SRTO... 2 SRTO... 2 nfiniti rive ode Selector...2 OOT RTS... 3 omponent arts ocation...3 omponent
More informationPressure sensors. For pressures up to 1800 bar (180 Mpa)
B A Pressure sensors 45 Pressure sensors or pressures up to (18 Mpa) Ratiometric signal evaluation (referred to supply voltage). elf-monitoring of offset and sensitivity. Protection against polarity reversal,
More informationDC Series. UL Recognized CSA Certified TUV Certified. DC Series. Specifications. Ordering Information 60 DC B 6 B. Electrical Schematics.
orcom Product Guide atalog: 1654001 ssue ate: 06.2011 R Power ine ilters for pplications Series 60 950 U Recognized S ertified TUV ertified 606 1510 Series General purpose line filters for applications
More informationSATRON VTe pressure transmitter
SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in
More informationUniversal absolute pressure sensor
Pressure Universal absolute pressure sensor Digital compensation - modular adaptability Absolute pressure sensor suitable for universal use. Pressure range from 0 5 bar to 0 500 bar Compensated temperature
More informationMotorized Rotary Actuator Type 3001
Motorized Rotary ctuator Type 00 dvantages/benefits 5 m nominal torque Open/closed with choice of rotation speeds Flange interface ISO 5 IP 65 rating orrosion resistant vailable with manual override Optical
More information1 6 / 2 6 S E R I E S C O M P A C T & S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S
16/26 SRIS O M P T & S T N R M O U L R I R P R P R T I O N S Y S T M S WILKRSON FILTRS, RGULTORS N LUBRITORS R26 Regulator F26 Filter L26 Lubricator M16 oalescing Filter B6 Filter/Regulator w/ Optional
More informationServoClass Couplings
Servolass ouplings ZERO-MX Servolass ouplings For high performance servo motor and demanding motion control applications High torsional stiffness for use in precision positioning applications Eco-Friendly,
More informationCONTOIL VZFA/VZOA , versions for higher requirements / applications
CONTOIL VZF/VZO 4...50, versions for higher requirements / applications For applications requiring an increased accuracy of ±0.5 % or better, such as: Measurement of L heating fuel or diesel in testing
More informationTM 314 TM 317 In-Line Torque Transducers
ata Sheet In-Le Torque Transducers eatures Integrated Torque and Speed onditiong Torque Ratg: 1000 to 10,000 m (737 to 7375 lb ft) Accuracy: < 0.1% (dependg on model) Overload apacity: 200% Overload Limit:
More informationVariable area meter F VA TUBUX M30
VA TUUX M30 The variable area meter must be fitted vertically and without tension. ontrol elements or reductions/extensions in the pipe diameter upstream or downstream of the variable area meter have no
More informationISO Standard Hydraulic Cylinder
ISO Standard ydraulic ylinder Series S/SG Series S Q N Nominal pressure: S Pa ore size :,,,, Related quipment Series SG Nominal pressure: - Pa ore size : 3,,,,, 51 ISO Standard ydraulic ylinder Series
More informationCompressed air counter DN
Data sheet -6447 Compressed air counter DN 65-250, Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 2½ -10 ) Exchangeable fitting: Probe removal under pressure
More informationGrease Lubrication Pump FK
1-3033-EN 1-0358-US for use in progressive, single-line and dual-line centralized lubrication systems pplication he FK pump unit is a multi-function piston pump whose modular structure makes it very versatile.
More informationTemposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MB Analog. Technical Data / Description
Temposonics Absolute, Non-Contact Position Sensors MH Series Technical Data / Description Document No. 551220 Revision E Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders
More informationCavity Pressure Sensor
Pressure Cavity Pressure Sensor Type 6183C... with Front ø1 mm Miniaturized piezoelectric sensor with single-wire technology for mold cavity pressures up to 2 000 bar in the injection molding of plastics.
More informationFault Code 16: Eaton Proprietary Link (EPL)
ault ode 16: aton Proprietary Link (PL) ault Isolation Procedure ault ode 16: aton Proprietary Link (PL) 1587:MI 130 SI 248 MI 2 Overview ault ode 16 indicates the Shift ontroller and the Transmission
More informationGeneral Characteristics
from 63 to 31 lbs_037_a he solution for > ain switchboard > Distribution panel > Emergency switching > us tie Function he CEC ensures making and breaking on load and security breaking of any low voltage
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
More informationDATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX
DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free
More informationph-kompaktelektrodensystem sensopac CPA 320
Technische Information TI 0C/0/de ph-kompaktelektrodensystem sensopac CPA 0 One of the two reference systems is specially protected so that only the second monitoring reference system is affected by penetration
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationIPH Series Double IP Pump
P SRS U P PUP P Series ouble P Pump 3.6 to 125.9cm 3 /rev 3Pa ll the types in this new design (11) series are installation compatible with the previous design (1). ote, however, that there is no longer
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationLX Hand Pump Oil. hand pumps - anti-sludge, anti-rust additives. HF oil - good low temperature performance. Dimensions (in) Model No. A-64 A-65 1.
Hydraulic Oil, Manifolds and Fittings Shown top to bottom: HF-, HF-, HF-2, LX-, 6, and FZ Enerpac System omponents HF Oil power pumps efficiency - prevents cavitation - anti-sludge, anti-rust, anti-foam
More informationTechnical Datasheet P-30/P-31. Standard transmitter.
Technical Datasheet P-/P-1 Standard transmitter www.envec.endress.com two-wire technology 4 2 ma three-wire technology 1 V measuring element with poly-silicon thin-film strain gauge,hence: -no moving mechanical
More informationThe Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
More informationWaterPumps QH QV QVK
WaterPumps Q QV QV Introduction IRON Pump /S was founded in 10 and since then the company has manufactured a great variety of pumps covering both the marine and industrial markets. Through the years the
More informationLow Voltage Fuses AFaC and BaC types
Fa and a types Fa and a type currentlimiting fuses 600V /, 3 400 mps escription The Fa and a type have an excellent current-limiting performance with an interrupting capacity as high as 100k at 600V /.
More informationPressure Sensors for Test and Measurement. For Precise Pressure Measurement in Static and Dynamic Applications
Pressure Sensors for Test and Measurement For Precise Pressure Measurement in Static and Dynamic Applications Piezoelectric Pressure Quartz and PiezoStar crystals are the heart of Kistler piezoelectric
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationTable of ontents Poppet Valves ow to rder
ir-il Systems, nc. www.airoil.com Table of ontents Poppet Valves................................................................. -0 ow to rder.........................................................................................
More informationPVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59
Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &
More informationSeries RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
More informationw w w. intellige n t a c t u a t o r. d e Flexible Belt Drive Linear Axes System FS
G Flexible elt rive inear xes System Freely onfigurable ctuator & Guide Modules for Single or Multiaxis Systems w w w. intellige n t a c t u a t o r. d e Flexible elt rive inear xes System ctuator Module
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More information