Linear Position Technology EZ-track

Transcription

1 Rugged Rod Style Housings: Transducers designed to survive in harsh industrial environments to reduce downtime on the plant floor. The R10 housing, sensing rod and components are designed and constructed to withstand heavy duty applications, such as those found in lumber mills, steel mills and stamping plants. They have been lab tested and field proven to withstand 2000 g of shock and 30 g of random vibration without false signals or mechanical damage. an aluminum housing with O-ring seals for an IP67 environmental rating. lthough R10 sensors can be ordered with any of the outputs below, the units can easily be changed in the field to reverse the output signal. Thus, one model can be used for two applications by programming the zero and span appropriately. The differential feature allows the gap distance between two magnets to be measured. The magnets must remain within the active span at all times and cannot be any closer than 2.5 inches to each other. In addition, the R10 s electronics are enclosed in (R10) Specifications: LT nalog LTX nalog LTX igital LTX SSI Output: 0-10 V, 10-0 V, -10 to m, 20-4 m, V, 10 to -10 V, 0-5 V, RS422 Start/Stop, Variable 0-10 V, 10-0 V 5-0 V, -5 to 5 V, 5 to -5 Pulse: Internal or xternal 24, 25 or 26 bit, inary or ray V, 4-20 m, 20-4 m interogation ode Span: in in in in +/-0.006% of full span or Repeatability: +/ in, whichever is qual to resolution qual to resolution of controller qual to output resolution greater nglish: in, in, Resolution: in / 16 bit in / 16 bit ontroller depedent in, in Metric: 1, 5, 10, 20 micron Operating temperature: -40 to +158 (-40 to +70 ) -40 to +185 (-40 to +85 ) -40 to +185 (-40 to +85 ) -40 to +185 (-40 to +85 ) Storage temp. -40 to +185 (-40 to +85 ) Null zone: 2.00 in 2.00 in 2.00 in 2.00 in ead zone: 2.50 in 2.50 in 2.50 in 2.50 in Operating pressure: Operating voltage: consumption: Response time: V 7-30 V 7-30 V 7-30 V 3 watts maximum, 200 m at 15 V 1 ms (span length 1-50 in) 2 ms (span length in) 3 ms (span length in) 4 ms (span length in) 1 watt at 1 ms interrogation time with no recirculations. Power consumption increases as interrogation times and recirculations increase. 40 m at 24 V typical 0.5 mms (L 2 ) 1 ms (2 < L 12 ) 2 ms (12 < L 30 ) 3 ms (30 < L 50 ) 4 ms (50 < L 100 ) 5 ms (100 < L 150 ) 6 ms (150 < L 180 ) 7 ms (180 < L 250 ) 8 ms (250 < L 300 ) 1 watt at 1 ms interrogation time with no recirculations. Power consumption increases as interrogation times and recirculations increase. 40 m at 24 V typical ontroller ependent 1.3 watt at 1 ms interrogation time. Power consumption increases as interrogation times increase. 40 m at 24 V typical 4.0 K measurements/sec. (span length 1-12 in) 2.4 K measurements/sec. (span length in) 2.0 K measurements/sec. (span length in) 1.1 K measurements/sec. (span length in) 0.5 K measurements/sec. (span length in) Shock: 2000 g 1000 g 1000 g 1000 g Vibration: 30 g 30 g 30 g 30 g Hysteresis: +/-0.02% of full span in in in Non-linearity: +/-0.05% of full span < 0.01% or +/ in, whichever is greater < 0.01% or +/ in, whichever is greater < 0.01% or +/ in, whichever is greater Rod end / Mounting hex: L: N/ Tri-color diagnostic Tri-color diagnostic Tri-color diagnostic Protection rating: IP67 IP68 IP68 IP68 gency approval: Turck Inc ampus rive, Minneapolis, MN T

2 Wiring iagrams: LT and LTX nalog 5-pin M12 urofast onnection N K U WH Y Mating ordset: RK 4.5T-*/S618 LTX igital 6-pin M12 urofast onnection Pinouts (olor) 1. PWR+ (N) 2. OUT+ (WH) 3. OMMON (U) 4. OUT- (K) 5. INT-(Y) 6. INT+ (PK) Mating ordset: RK 6T-*/S618 LTX SSI 6-pin M12 urofast onnection Pinouts (olor) 1. PWR+ (N) 2. T+ (WH) 3. OMMON (U) 4. T- (K) 5. LOK- (Y) 6. LOK+ (PK) Mating ordset: RK 6T-*/S618 Part Number Key: nalog R10 LT 12 - R10 - LI 0 - H1151 LT Linear Transducer * Length of R10 10 mm Rod, luminum R10 10 mm Rod, Stainless Steel LI LU L Output Voltage ifferential m 0 to 10 V 0 to 10 V m 10 to 0 V 4-20 m 4 0 to 5 V 5 5 to 0 V H1151 Voltage ifferential Output onfiguration of onnection 5-pin M12 urofast onnector Part Number Key: LTX nalog R10 H LTX 12 - R10 - LI 0 X3 - H1151 LTX Linear Transducer * Length of M Millimeters Output Voltage m 0 to 10 V m 10 to 0 V 2-10 to 10 V 3 10 to -10 V 4 0 to 5 V 5 5 to 0 V 6-5 to 5 V 7 5 to -5 V R10 R10 10 mm Rod, luminum 10 mm Rod, Stainless Steel X3 3 iagnostic Ls Number of Ls LI LU Voltage Output onfiguration H H1151 of onnection 5-pin M12 urofast onnector Turck Inc ampus rive, Minneapolis, MN T

3 Part Number Key: igital R10 H LTX 12 - R10 - VPI X3 - H1161 Output Mode LTX Linear Transducer RS RS422, Start/Stop Pulse VP Variable Pulse xternal Interrogations VPI Variable Pulse Internal Interrogations * Length of Number of Recirculations ¹) * 001 (Standard) to 225 ¹) Only vailable with Output Mode 'VPI' or 'VP'. Otherwise (lank) M Millimeters Number of Ls X3 3 iagnostic Ls R10 10 mm Rod, luminum H of onnection R10 10 mm Rod, Stainless Steel H pin M12 urofast onnector Part Number Key: SSI R10 H I J K L M LTX 12 - R10 - SSI S - X3 - - H1161 LTX Linear Transducer * Length of M Millimeters R10 10 mm Rod, luminum R10 10 mm Rod, Stainless Steel ata Mode SSI Synchronous Serial Interface I R V J orward Reverse Velocity mm mm mm mm mm mm mm " " " 0.001" irection Resolution 1 24 bit 2 25 bit 3 26 bit inary ode ray ode ata Length ata ormat K X3 L (lank) M H1161 Number of Ls 3 iagnostic Ls Option None larm of onnection 6-pin M12 urofast onnector H S synchronous Synchronous ata Turck Inc ampus rive, Minneapolis, MN T

4 imensions: LT imensions: LTX Turck Inc ampus rive, Minneapolis, MN T

5 ccessories 1 iameter ylinder Magnet M-R10 Standard Magnet Spacer STS-R10 Split Magnet Spacer SPS-R10 qually spaced on a.937 bolt circle gg Shape loat -R10 qually spaced on a.937 bolt circle Standard 4-Hole Magnet STM-L-R10 (aluminum) STM-SS-R10 (stainless steel) Split Magnet SPM-L-R10 qually spaced on a.937 bolt circle qually spaced on a.937 bolt circle ll dimensions shown as: inches [mm] Turck Inc ampus rive, Minneapolis, MN T

6 ccessories Mounting racket L-R10 Rod Support R-R10 Magnet Mounting racket MM-R10 M-R10: Part number includes mounting bracket L-R10 and rod support bracket R-R10. Test and Programming evice T2-LT T2-LT-LI Rubber oot T-R10 ll dimensions shown as: inches [mm] Turck Inc ampus rive, Minneapolis, MN T