DL-RS SPECIFICATIONS. Type STATIC LINEAR. Project

Transcription

1 LRS STTI LINR L RIGI STRIP SRIS atalog No. L Rigid Strip without opal cover L Rigid Strip with opal cover SRIPTION L Rigid Strip is a dimmable linear fixture suitable for wet, damp or dry location. Includes 2 inch lead wires for waterproof input and output connections. Opal cover can be ordered separately. The opal cover provides 7080% light diffusion and creates a nearly seamless look. lso included with fixture are two 0 deg, two 45 deg mounting clips (4 total), and one outdoor output end cap. The outdoor end cap is required at the end of each run.suitable for use in closet applications in accordance to N. SPIFITIONS Input Voltage 24V eam ngle 120 RI > 80 Ls (per ft) 18 Operating Temp * 22 F to 140 F Lamp Life Maximum Run imensions Housing nvironment 50,000 hours 24 ft 5/8 W x 5/8 H 15/16 H with opal cover luminum extrusion Wet, amp or ry location LUMN T LRS Length Watts olor Temp Lumens * fficacy 12 inch inch inch inch K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w K lm/w * Using the opal cover will reduce the lumens by approx 15 to 20%. For higher lumen output consult factory. ertifications Warranty 5 Years see published warranty terms for detailed information. * xceeding the operating temperature values may damage the Ls by reducing the lifespan, lumen output, and adversely impact color consistency. It is recommended adequate airflow and heat sinking be taken into consideration in the installation and application of this product. Improper thermal management may lead to premature product failure. This product cannot be submersed in water, installed where puddling can occur or covered with snow. Not tested under salt spray conditions. The outdoor end cap (LPSO) is required at the end of each run Harbor Park rive 219 South 6 th ve Rev 4 support@jescolighting.com Port Washington, NY ity of Industry, /1/2016 Specifications subject to change without notice. Page 1 of 5

2 LRS STTI LINR L RIGI STRIP SRIS atalog No. ORRING INFORMTION L Rigid Strip with no cover L Rigid Strip with opal cover MOL LNGTH OLOR MOL LNGTH OLOR OVR LRS 12 : : K LRS 12 : : K : Opal over 24 : 237/8 30 : K 24 : 237/8 30 : K 36 : 355/8 40 : K 36 : 355/8 40 : K 48 : 471/2 60 : K* 48 : 471/2 60 : K* R : Red R : Red G : Green G : Green : lue : lue Y : mber Y : mber ll fixtures include one LRSM1 and one LPSO. * ontact factory WIRING IGRMS For reference purposes only. Not for installation. Not to scale. PLUG & PLY On/off inline dimmer switch. Power Supply LPSXX/24. Inline immer Switch (optional) LIM5, LIMxxxRF (not shown). L Luminaire LRSXXXX. nd ap LPSO HRWIR Multiple Runs On/off. Power Supply LPSXX/24JXX. Output Power onnector LPSOPTF. L Luminaire LRSXXXX. nd ap LPSO. Power Splitter LPSO2Y (shown), LPSO3Y HRWIR On/off inline dimmer switch. Power Supply LPSXX/24JXX. Inline immer Switch (optional) LIMxxxRFHW. L Luminaire LRSXXXX. nd ap LPSO. Output Power onnector LPSOPTF 15 Harbor Park rive 219 South 6 th ve Rev 4 support@jescolighting.com Port Washington, NY ity of Industry, /1/2016 Specifications subject to change without notice. Page 2 of 5

3 LRS STTI LINR L RIGI STRIP SRIS atalog No. HRWIR 010V imming for multiple runs. Power Supply LPSXX/24JXX. imming Interface LIM5HW. Output Power onnector LPSOPTF. L Luminaire LRSXXXX. nd ap LPSO 24V Input 24V Output 120V Input 010V ontrol 24V Input 24V Output 120V Input POWR SUPPLY See specification sheets for more information. If the Max Load of a power supply exceeds the fixture's Max Run, then you may install multiple runs per given power supply. Wattage = Max power capacity of power supply. May need to be derated if operating at max temperature. Max Load = Maximum length worth of fixtures. HardWire Power Supplies ry Location UL Listed (with Junction ox) LRSxx LPS20/24J 20 5 ft LPS60/24J ft LPS96/24J ft HardWire Power Supplies Wet, amp, or ry Location UL Listed (with Junction ox) LRSxx LPS80/24JO ft LPS96/24JO ft HardWire Power Supplies ry Location UL Recognized (with Junction ox) LRSxx Model Number Max Load Max Load LPS35/24J ft LPS60/24J ft LPS100/24J ft Plug & Play Power Supplies ry Location UL Listed LRSxx Model Number Max Load Max Load LPSWP24/ ft LPS24/ ft LPS48/ ft LPS60/ ft LPS100/ ft LPS100/24L2 * ft * lass 2 HardWire immable Power Supplies ry Location UL Listed (with Junction ox) LRSxx LPS40/24JIM ft LPS60/24JIM ft LPS96/24JIM ft 15 Harbor Park rive 219 South 6 th ve Rev 4 support@jescolighting.com Port Washington, NY ity of Industry, /4/2016 Specifications subject to change without notice. Page 3 of 5

4 LRS STTI LINR L RIGI STRIP SRIS atalog No. IMMING OPTIONS S V TV WH L IM5 L IM5 HW L IM100 RF L IM100 RF HW L 200 RPT L IM200 RF HW L RF 400H IM L RF 400W IM L RF 402W IM L RF 400 RV Wall Plate immer 010V Plug & Play immer 010V Hardwire immer Plug & Play Remote Step immer Hardwire Remote Step immer Power Repeater Simple Handheld Radio Frequency immer ontroller Handheld Radio Frequency immer ontroller Wall Mounted Radio Frequency immer ontroller Wall Mounted ual Radio Frequency immer ontroller Radio Frequency Receiver See our complete line of remote, wall mounted and handheld IMMING OPTIONS online for more information. SSORIS Mounting lip Kits Part Number lips Included escription LRSM1 (2) 0 deg, (2) 45 deg The mounting clip kit packages allows for different installation angles. LRSM1 included with fixture. Magnet Part Number imensions escription MTMG01ST 1 x ½ Magnet can be attached directly to the fixture or mounting clip using the double sided tape. Sold as a pair. Indoor use only. Opal over over end caps Part Number Length escription LRS12 12 inch The opal cover provides 7080% light diffusion to create a LRS24 24 inch nearly seamless look. Includes two cover end caps. Longer covers may cover multiple fixtures for a cleaner look with less LRS36 36 inch breaks. LRS48 48 inch LRS72 72 inch Height: 11/ Harbor Park rive 219 South 6 th ve Rev 4 support@jescolighting.com Port Washington, NY ity of Industry, /1/2016 Specifications subject to change without notice. Page 4 of 5

5 LRS STTI LINR L RIGI STRIP SRIS atalog No. OUTOOR POWR SSORIS Part Number escription Part Number escription LPSOPTF LPSO2Y Output power connector, clear wire are wire to female connector Length: 8 inches Lock Nut iameter: 11/16 inch Must use for outdoor applications 2Way power splitter, clear wire Overall Length: 13 inches Length of Split Lead: 6 inches Lock Nut iameter: 11/16 inch Requires LPSO on open ends LPSOXT18 LPSOXT48 xtension cable, clear wire Length: 18 inches Lock Nut iameter: 11/16 inch xtension cable, clear wire Length: 48 inches Lock Nut iameter: 11/16 inch LPSO3Y 3Way power splitter, clear wire Overall Length: 13 inches Length of Split Lead: 6 inches Lock Nut iameter: 11/16 inch Requires LPSO on open ends LPSOXT96 xtension cable, clear wire Length: 96 inches Lock Nut iameter: 11/16 inch LPSOPTM Input power connector, clear Wire are wire to male connector Length: 8 inches For special applications only. LPSO Outdoor output power connector end cap pply to the end of each run. (1) Included with fixture Harbor Park rive 219 South 6 th ve Rev 4 support@jescolighting.com Port Washington, NY ity of Industry, /1/2016 Specifications subject to change without notice. Page 5 of 5