TMU045018HLXXXA,TMU045018HLXXXB

Transcription

1 TMU04508HLXXX,TMU04508HLXXXB onstant urrent Linear Module OMPLINT High Density, high brightness chip array for use in lass Linear applications onstant current for maximum efficacy Onboard connector for ease of assembly vailable in standard T's Dimmable when used with a dimmable driver Suitable for use in retrofit rebate programs Optional lens to diffuse light 80 RI standard and 90 RI available General Ratings Max Lumen Max urrent Nominal urrent Input Nominal D Power onsumption Nominal Operating Max urrent Beam ngle RI Operating mbient Temperature Range (Ta) Maximum Module ase Temperature (Tc) Estimated Lumen Maintenance (L70) olor onsistency Overall Size PB Material / Module Weight Maximum Screw Installation Torque Safety/ompliance Energy Efficiency Label Warranty 505 lumens at 4000K / 80 RI* 350 m (450m Max.) 3.5W (8 W Max.) 40 VD 0 80, to 40 L70 = 90 (Ts = 95 ) / L90 = 60 (Ts = 65 ) L70 = >60,000hrs / L90 = >36,000hrs Binning per NSI ; 4 SDM TMU04508HLXXX: " x 0.94" x 0.4" (including connector) TMU04508HLXXXB:.88" x 0.94" x 0.4" (including connector) EM / 38 g 5 inch ounces curus (File # E35548) lass Lighting System ompliant; Input urrent 5 years with suitable Fulham Drivers * t Tc mod = 5º Page of Rev B

2 TMU04508HLXXX,TMU04508HLXXXB Part Numbering Matrix T M Electrical Specifications Module Part Number TMU04508HLxxxx U Number of Type ontrol Type Max. urrent M = Module U = None 045 = 450m (E/UL lass ) * Indicates standard module options. ll others are built to order. ontact Fulham for availability, MOQ and lead time applies. ** Indicates maximum rated current. Modules may be operated at a current less than or equal to this value. Reference urrent vs. Rel. Lum. Flux Table to calculate estimate lumen output at lesser currents. ***bsolute maximum forward voltage was not used in calculating nominal rated power. Data is provided to assist in selecting proper driver. Electrical and Optical Specifications Input urrent 350m 450m** 08 Max. Power 08 = 8W Nom. Forward Voltage 38.6 VD 40 VD H Nom. Rated Power 3.5W 8W L PB Shape Material L = Linear H = EM onnector 8 RI 8* = 80 9 = 90 Input urrent 50m 00m 50m 00m 50m 300m 350m 400m 450m 40 T 7 = 700K 30* = 3000K 35 = 3500K 40* = 4000K 50 = 5000K Module bs. Max. Forward = 50 *** 39.4 VD 40.4 VD 4. VD 4.4 VD 43.4 VD 44. VD 44.9 VD 45.4 VD 45.9 VD OMPLINT Size/Options * = " x 0.94" B* =.88" x 0.94" = onformal oating D =.8 onformal oating Module Part Number olor Temperature Nominal Luminous 350m/90 RI Nominal Luminous 350m/80 RI 80RI TMU04508HLx30x 3000K 55 lumens 875 lumens 39 lm/w TMU04508HLx40x 4000K 65 lumens 00 lumens 49 lm/w urrent vs Relative Luminous Flux Table Forward urrent (m) ** Lumen Derating Multiplier.00.4 NOTE: ) Electrical and optical specifications are based on Tc mod = 5º. Reference mb. Temp. vs Rel. Lum. Flux for other temperatures. ) Standard lumen output and efficacy is calculated for standard options. Reference T vs Rel. Lum. Flux chart for lumen ratio calculation. 3) Specifications are subject to change without notice. Thermal Specifications With onnectors Storage Temperature Range 35 to 00 Operating mbient Temperature Range 35 to 40 Maximum ase Temperature (Tc mod) L70 = 90 (Ts = 95 ) / L90 = 60 (Ts = 65 ) Page of Rev B

3 TMU04508HLXXX,TMU04508HLXXXB Mechanical Drawings OMPLINT TMU04508HLXXX.4" [8.96mm] 4.33"[09.98mm] 4.33"[09.98mm].4"[60.96mm] 4.33"[09.98mm] 4.33"[09.98mm] 0.47" [.9mm] 0.94" [3.88mm] 0.8"[7.6mm] 0.56"[4.33mm] "[558.8mm] R 0.09"[.3mm] Holes 0.70"[7.88mm] 0.4" [6.mm] TMU04508HLXXXB.58" [40.4mm] 4.33"[09.98mm] 4.33"[09.98mm].4"[60.96mm] 4.33"[09.98mm] 4.33"[09.98mm] 0.94" [3.88mm] 0.9"[7.45mm] 0.4" [6.mm] 0.59"[4.9mm].88"[58.6mm] Page 3 of Rev B

4 TMU04508HLXXX,TMU04508HLXXXB ccessories OMPLINT Interconnects Wago Part Number: Single Pin Metal pin(s) to interconnect Modules For more detail information, please visit Wago's website: ",.88" Diffuser Lens (with 4 installation clamps) Fulham Part Number: ": TLEOPT0004;.88": TLEOPT0005 white polycarbonate diffuser lens 8% transmissivity at nominally 0.59" rated currents. [5mm].5"[3.8mm] Installation Steps when using clamps:. Place the Module on the luminaire surface.. Place the lamp on top of module (line it up with module mounting hole). 3. Fasten the lamp and module to the luminaire by using the appropriate (not provided) screws. 4. Repeat step a total of 4 times. (The screws are not included with the clamps or lens.) 45.76" Diffuser Lens (with 8 installation clamps) Fulham Part Number: TLEOPT00 White polycarbonate diffuser lens 0.59" [5mm].5"[3.8mm] Installation Steps when using clamps:. Place the Module on the luminaire surface.. Place the lamp on top of module (line it up with module mounting hole). 3. Fasten the lamp and module to the luminaire by using the appropriate (not provided) screws. 4. Repeat step a total of 8 times. (The screws are not included with the clamps or lens.) Page 3 of Rev B

5 TMU04508HLXXX,TMU04508HLXXXB Termination Notes OMPLINT If connectors are used, use solid wire size 4 8 WG, rated at a minimum 50V, minimum 05, and stripped to length between 67 mm ( inches). Push Button Push button for insertion of conductor and for easy removal of wires. onnector Type: WGO PN# 06045/ Fastening Notes If fastening by screw hole, use any screw with diameter less than 0.85 in (4.7mm). Use all available screw holes to ensure good contact between back side of module and mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #6 or M4 Pan Head screw. If fastening using doublesided tape, start with clean, oilfree and dustfree surface. Peel backing and place module on mounting surface. Firmly press down on the module to ensure good adherence. Follow the doubleside tape manufacturer s installation instructions. BJB PF (PushtoFix) fixing elements for PBs can be used to fasten modules to mounting surface. Reference BJB's website for ordering information and specific model to use: NOTE: annot be used when Fulham's white polycarbonate lens is being attached to the module. Use specified screws to fasten lens clamps and module to mounting surface Environmental Rating Modules are rated for dry locations, unless option for conformal coating is requested. onformal coating is RTV based and rated for Environment and Moisture Protection per IP830. Electrostatic Sensitive Product (ESD) Fulham products should be handled with proper measures to protect against any potential ESD damage. When servicing, personnel should be ground and direct contact with should be avoided. Thermal Management Proper thermal management should be employed to ensure life and reliability of product. Use of thermal grease, paste, pad, or other material interface is highly recommended. Polarity Notes Modules are polarity sensitive. Ensure that positive from Driver is connected to positive of modules and that negative from Driver is connected to negative of modules. Polarities of modules are marked with for positive and for negative. Page 4 of Rev B

6 TMU04508HLXXX,TMU04508HLXXXB olor and Binning Optical Spectrum*** OMPLINT 0,48 6,00K 5,30K 4,745K 4,60K 3,70K 3,0K,870K 0,46,580K 0,44 0,4 7,040K y 0,40 0,38 Blackbody Locus 0,36 0,34 0,3 0,30 0,30 0,8 0,3 0,34 0,36 0,38 0,40 0,4 0,44 0,46 0,48 0,50 x hromaticity Diagram for NSI bins *** Value varies depending on product type and color rank atalogue 03 Thermal DeRating T vs Luminous Flux mbient Temperature (Ta) 5º 30º 35º 40º 45º 50º 55º 60º Relative Luminous Flux T 700K 3000K 3500K 4000K 5000K Relative Luminous Flux Spec Sheet 757 Spec Sheet Page 5 of Rev B

7 TMU04508HLXXX,TMU04508HLXXXB ompatible Fulham Drivers Fulham Part Number Driver Description # of Modules/Driver OMPLINT Wiring Diagram TT003505L TMUNV03505L TT003507B T TMUNV070030L T(M)UNV07008 TM /8V 350 m, 5W Driver, 0V Input, TRI Dimmable 350 m, 5W Driver, Universal Input, 00V Dimmable 350 m, 7W Driver, 0V Input, TRI Dimmable 350 m, 5W Driver, 0V Input TUNV035060L 350 m, 60W Driver, Universal Input 3~4 B 700 m, 30W Driver, Universal Input, 00V Dimmable TT L 700 m, 30W Driver, 0V Input,TRI Dimmable T(M)UNV TM /40V 700 m, 8W Driver, Universal Input, (00V Dimmable) 700 m, 8W Driver, 347V Input, 00V Dimmable 700 m, 40W Driver, Universal Input, (00V Dimmable) 700 m, 40W Driver, 347V Input, 00V Dimmable T(M)UNV m, 4W Driver, Universal Input, (00V Dimmable) 3 T(M)UNV40060L 400 m, 60W Driver, Universal Input, (00V Dimmable) 4 TUNV070000L 700 m, 00W Driver, Universal Input 8(4S P) D TUNV05000L 050 m, 00W Driver, Universal Input (4S 3P) D TMUNV05P40E TUNV05P40E TMUNV05P60E/60F TUNV05P60E/60F FHSUNV36L 50~050 m Programmable, 40W Driver, Universal Input, 00V Dimmable 50~050 m Programmable, 40W Driver, Universal Input, DLI Dimmable 50~050 m Programmable, 60W Driver, Universal Input, 00V Dimmable 50~050 m Programmable, 60W Driver, Universal Input, DLI Dimmable Hotspot at m output (350m) (700m) (350m) (700m) (350m) (700m) 3 (050m) (350m) (700m) 3 (050m) NOTE:. Subject to rated loading conditions.. Modules are polarity sensitive. Ensure that positive from Driver is connected to positive of modules and that negative from Driver is connected to negative of modules. 3. List is subject to change without notice. Wiring Diagram DRIVER Single hannel Driver, Module connected B Single hannel Driver modules connected in series DRIVER DRIVER Single hannel Driver, Modules connected in parallel D Single hannel Driver Modules connected in series & parallel DRIVER Page 6 of Rev B