Flowmeters & Monitors A range of cost saving solutions

Transcription

1 & Monitors range of cost saving solutions Protect systems, reduce fluid and air loss and increase efficiency Effective and accurate flow measurement n extensive range of flow metering products. LoFlow oil and water flowmeters. 0 bar max. working pressure. Easiflow meters and flowswitches with flows from to 50 l/min. ataflow 4-20m and pulse output flow transmitters and the ataflow ompact inline flow transmitter. Flowline oil, water and air calibrated flowmeters and flowswitches available in brass or Stainless Steel. Hydraulic Test Units for the speedy diagnosis of hydraulic circuit faults with flow ranges from 2 to 60 l/min. ontact Information: European Product Information entre Freephone: (from T, E, H, Z, E, EE, ES, FI, FR, IE, IT, PT, SE, SK, UK) filtrationinfo@parker.com Product Features: LoFlow oil and water flowmeters. 0 bar max. working pressure. Easiflow meters and Flowswitches. Work in any plane. Flows from to 50 l/min. ataflow 4-20m and pulse output flow transmitters and ataflow ompact inline flow transmitter. Flowline oil, water and air calibrated flowmeters and flowswitches available in brass or Stainless Steel. Hydraulic Test Units for the speedy diagnosis of hydraulic circuit faults with flow ranges from 2 to 60 l/min. 440

2 LoFlow - and Features & enefits Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting assembly. Negligible pressure drop characteristics. 0 bar pressure rating. Simple to use. ody Grillon TR55. ack body half S 020. all retainer S 020. ack panel PV. Float See below. Maximum working pressure: 0 bar. Maximum working temperature: 60. ccuracy: ±2% typical. Repeatability: ±%. onnections: and tapered threads. Note: lways install vertically. Simple to fit, easy to use The LoFlow meter has been designed for those industries where the need exists for a low cost solution to small measurements of flow with an accurate reading. LoFlow uses the well tried and tested principle of variable area flow measurement utilising the movement of a ball or float inside a calibrated tapered bore. Typical pplications Pharmaceutical industry Filtration systems Hospital equipment For water applications treatment Photography and X-ray Equipment Swimming pools Outlet port R Media (SPT male) Float material 44 LF80242 LF8024 LF80244 LF804 LF8024 LF80244 LF804 LS.2020 LS.200 LS.2220 LS.002 LS.009 LS.090 LS cetal cetal Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability Inlet port R / R 4 off push out fixing slots Ø6 X 8 LG 44

3 Easiflow - Meters and Flowswitches Features & enefits and water calibrated. Works in any plane. Pressures up to 0 bar. Flows from to 50 I/min. ccuracy ±5% FS. Repeatability ±% FS. Switches fully adjustable flow rate signalling. Plant and equipment protection. Easiflow Meters one cetal Viewing glass orosilicate glass alibrated spring Stainless steel Seal Nitrile ody Glass filled nylon Maximum working pressure: 0 bar. Minimum working pressure: bar. Temperature range: +5 to to Flow rate: to 50 l/min. Viscosity range: 0 to 200 centistokes (oil). ccuracy: ±5% FS. Repeatability: ±% FS. onnections: SP parallel threads. Weight: kg. Flowswitch s The Easiflow switch is a flow measuring device incorporating an / switch suitable for controlling valves or pump motors or for activating alarm signals. General flowmeter specification: See material details opposite. Switch type specifications: Magnetically operated reed switch. Electrical details: Voltage range Maximum current Maximum load 00Vac/dc 2.5mps 00W resistive 0W inductive 42 /F HEX 42 /F HEX Ø40 Ø Ø Ø60 Flowmeter only EF20 EF220 EF20 EF4220 EF020 EF0 EF20 EF0 EF420 EF0220 EFW.002 EFW.0502 EFW.002 EFW.502 EFL.05 EFL.00 EFL.050 EFL.00 EFL.50 EFW.052 Media Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. Flowmeter plus one switch EF022 EF2 EF02 EF EF2 EF EF42 EF22 EF2 EF422 ESW.05S ESW.00S ESL.05S ESL.00S ESL.050S ESL.00S ESL.50S ESW.050S ESW.00S ESW.50S Media Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact Parker Filtration for availability. Switch range (l/

4 ataflow - 4 to 20m and Pulse Output Flow Transmitters Features & enefits 4 to 20m output. Pulse output available for totalising/batching. Works in any plane. ccepts reverse flow. Maximum flow 50 l/min. Negligible pressure drop. Pressures up to 0 bar. Low cost. Simple to install. For use with most liquids. Factory calibrated. ccuracy ±2%. IN 50 plug connection (included). orosilicate glasstube. Nitrile seals. ody Glass filled nylon. Rotor and locater cetal. Washers and shaft Stainless steel. Rotor tips Stainless steel. Max. working pressure: 0 bar oil/water. Flow indication: Min: 2 I/min. Max: 50 l/min. ccepts reverse flow. ccuracy: ±2% FS. Temp range: +5 to +80 oil. +5 to +60 water. onnections: SP parallel threads. Weight: 0.Kg. alibration 4 to 20m: 4m = 0 l/min, 20m = 00 l/min. alibration pulse output per litre: K factors. = 5.4 = Electrical details 4 to 20m: Supply = 24Vdc. Pulse output: Supply = 24Vdc. (open collector transistor). igital isplay (FT 990 only) For indicator options please refer to MS50 section of the catalogue, reference U00 and U002 indicators Ø FT980 FT.980 FT990 FT /F HEX Ø60 06 escription ataflow "Pulse" output transmitter ataflow 4-20m transmitter Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. ataflow 4-20m transmitter can be connected to a igital isplay Unit (U00 or U002) 4 to 20m On-Site alibration Set your system to zero flow. onnect a multimeter across terminals (+20m) and (0m) (ia. 2). Set the zero to read 4m on your multimeter (ia. ). Set your system to full flow and set the span to read 20m on your multimeter. (ia. ) Note: Minimum span setting = 0 I/min Set full flow to 20m iagram iagram 2 Span Flow setup Slider Zero Set zero flow to 4m 0m +20m Plug wiring 2 Earth OV power +24v power 44

5 ataflow ompact - Inline Flow Transmitter Features & enefits Pulse output signal for flows up to 25 l/min. Lightweight and robust. Operates in any plane. Simple to install. Low cost flow measurement. Negligible pressure drop. ccepts reverse flow. /8 SP male connection. or compatible clear fluids only. Ideal for washing machines, showers and vending machines. ody Grilamid TR55. Rotor 8% PTFE filled nylon. Shaft Stainless steel. Shaft Retainers Grilamid TR55. Operation: Infra-red. Maximum working pressure: 20 bar. Pressure drop: Max 0. bar at 5 l/min. Flow range: to 25 I/min. (ccepts reverse flow). alibration: K Factor 52 pulses per litre, typical. Subject to application. ccuracy: ±2% typical. Red wire Green wire lue wire +5V supply Output signal 0V supply 2.0 TYP Repeatability: ±%. Temperature range: +5 to +0. Overall dimensions: 52mm x mm x 2mm. Weight: 6 grams. onnections: /8 SP able length: 00mm. Power supply: 5 Vdc. Output signal: 5 Vdc - square wave ataflow ompact The Low ost Transmitter The ataflow ompact Transmitter was designed to offer OEM s and end users alike a means of monitoring low flows on liquids with an electronic output signal but at LOW OST. Fluid passes through the one piece sensor body impacting on the twin vaned turbine rotor, causing it to rotate at a speed proportional to the flow rate. Two opposing photo-transistors are mounted either side of the rotor and externally of the clear sensor body, these generate a continuous signal. s the rotor spins each blade obscures the infra red signal. This is then converted into an industry standard pulse output signal compatible with inexpensive display units for flow rate, totalising, batch control and large, central control systems. The lightweight Grilamid body with its virtually unrestricted flow path, offers negligible pressure drop for flows up to 25 I/min and withstanding pressures up to 20 bar. Flow Rate Totalising atch ontrol and applications in many industries ataflow ompact Transmitters are small and very robust having been developed and tested extensively in industry applications where space is a restriction. ataflow ompact with its Grilamid body and SP connections can be installed almost anywhere and once installed will give accurate and reliable output signalling. 4.0 ISO 228 G /8 TYP F F escription ataflow compact flow transmitter Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. 444

6 Flowline - and alibrated (rass Version) Features & enefits Works in any plane. Pressure up to bar (5000 psi). Flows up to 60 l/min. ccuracy ±5% FS. Repeatability ±% FS. irect reading. Relatively insensitive to viscosity changes. or water calibrated. Optional reed switch upgrade. rass body to S 284 Z4. Maximum working pressure: Up to bar. Minimum working pressure: bar. Temperature range: rass 20 to +90. alibration: Specific gravity at 20. Specific gravity.0 at rass flowmeter for oil Viscosity range: 0 to 200 cst (oil). ccuracy: ±5% FS. Repeatability: ±% FS. Min. scale reading: 0% FS. onnections: SP parallel threads. Wetted/non-wetted parts: onsult Parker for information., and SP thread options ( version on next page) E Ø ØF Note: To add an electrically operated reed switch to your flowmeter please order 260 imensions (mm) SP Maximum E F Weight (kg) FM FM2622 FM FM FM2622 FM26222 FM26222 FM FM FM26422 FM FM FM FM FM FM FM FM FM FM For intallation details for flowmeters see next page.5.5 rass flowmeter for water imensions (mm) FM FM FM26222 FM FM FM FM26222 FM FM FM FM FM FM FM FM FM FM FM FM FM SP Maximum Note : Part numbers featured with bold highlighted codes will ensure a standard product selection E For intallation details for flowmeters see next page F Weight (kg)

7 Flowline - and alibrated (Stainless Steel) Features & enefits Stainless steel to S 90 6S. Maximum working pressure: Up to bar. Minimum working pressure: bar. Temperature range: 20 to +05. alibration: Specific gravity at 20. Specific gravity.0 at Stainless steel flowmeter for oil Viscosity range: 0 to 200 cst (oil). ccuracy: ±5% FS. Repeatability: ±% FS. Min. scale reading: 0% FS. onnections: SP parallel threads. For flow measurement of corrosive or chemical media or in harsh locations. Manufactured in stainless steel 6. Works in any plane. Pressure up to bar (5000 psi). Flows up to 60 l/min. ccuracy ±5% FS. Repeatability ±% FS. irect reading. or water calibrated. Optional reed switch upgrade. Ø8 Ø5 65 /F Wetted parts: ody, thread adaptor Piston, etc: cone locknut: Stainless Steel. Flow cone: S 90 6S /F SP option (, and on previous page) Ø6 Ø0. Magnet encapsulation: Stainless steel S90/:99. :6S. Spring: Stainless steel to S 2056 EN J. Seal: Fluoroelastomer. Note: To add an electrically operated reed switch to your flowmeter please order 260 imensions (mm) SP Maximum E F Weight (kg) FM2622 FM262 FM2622 FM262 FM2622 FM26 FM26222 FM2642 FM26422 FM264 FM FM.26 2 FM FM.26 2 FM FM.26 FM FM FM FM For intallation details for flowmeters see above.5.5 Stainless steel flowmeter for water imensions (mm) FM2622 FM26222 FM262 FM26222 FM FM2622 FM26222 FM26422 FM FM2642 FM FM FM.26 2 FM FM FM FM FM FM FM SP Maximum Note : Part numbers featured with bold highlighted codes will ensure a standard product selection For intallation details for flowmeters see above F.5.5

8 Flowline - Flowswitches Features & enefits oxed two-switch type. Intrinsically safe versions (supplied complete with flowmeter). Maximum/minimum switching models. Maximum working pressure bar. (min bar) Flows from 2.0 to 0 I/min. Stainless steel suitable for corrosive fluids. Stainless steel to S To order the required switching unit, simply add the appropriate prefix before the part numbers shown below. escription Switch Range (Typical) FS64222 FS FS6422 FS64222 FS FS FS FS switches, l/min ( SP) 2 switches, 5 - l/min ( SP) 2 switches, 5-55 l/min ( SP) 2 switches, 0-0 l/min ( SP) 2-2 l/min and 0-20 l/min 6-24 l/m and 20- l/m 5-0 l/min and 0-55 l/min 0-50 l/min and 50-0 l/min Product configurator rass flowswitch for oil or water FS64 FS6 FS6 FS6 2 switches Intrinsically safe high switch Intrinsically safe low switch Intrinsically safe hi/low switch Flow range and (port size) l/min ( SP) 5 - l/min ( SP) 5-55 l/min ( SP) 0-0 l/min ( SP) 2 22 Fluid type Switch Range (Typical) 2-2 l/min and 0-20 l/min l/m 5-0 l/min 0-50 l/min and 50-0 l/min Product configurator Stainless steel flowswitch for oil or water FS64 FS6 FS6 FS6 2 switches Intrinsically safe high switch Intrinsically safe low switch Intrinsically safe hi/low switch Flow range and (port size) l/min ( SP) 5 - l/min ( SP) 5-55 l/min ( SP) 0-0 l/min ( SP) 2 22 Fluid type Switch Range (Typical) 2-2 l/min and 0-20 l/min 24- l/m 5-0 l/min 0-50 l/min and 50-0 l/min Ordering example FS6422 FS Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. 44

9 Hydraulic Test Equipment Features & enefits Speedy diagnosis of hydraulic circuit faults. Flows ranging from 2 to 60 l/min. Measuring flow, pressure and temperature. Fully Portable No power source required. Hydrotrac unit for flows from 2 to 0 I/min available. esigned for oil applications only. Troubleshooting Test Units Flow range: 2 to 60 I/min. Pressure range: to bar. Temperature range: 0 to +90. /F HEX Safety n axial flow restrictor valve is fitted which can be adjusted under full load from open to fully closed, and to complete the specification, a safety blow-out disc, set to fail at 455 bar is fitted to the manifold in a position facing away from the operator when reading the gauges normally. Two spare blowout discs are supplied which are easily replaced by removing the hexagonal plug on the gauge manifold. dditional blow out discs can be ordered (ag of 0) Flow range (I/ Part number Weight Kg (with case) escription Safety blow out discs x 0 Ø imensions (mm) Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note : 42 Hydrotrac unit features 2 flowmeters ( and 0-0 l/ and pressure gauge and thermometer. Hydraulic Test Units are designed specifically for the speedy diagnosis of hydraulic circuit faults in mobile, marine and industrial systems using the normal range of mineral oils. Their rugged construction based mainly on mild steel, manganese bronze and acrylic materials makes them ideally suited for arduous use in the field. Each unit is supplied in a convenient carrying case providing full protection and additional storage space for fittings. ecause they need no power source such as batteries etc, they are always ready for instant use. 6 models are available to cover flow capacities up to 60 I/min and each incorporates a direct reading, uni-directional flow meter. The meter, which is both self cleaning and reasonably tolerant of contaminated fluids is coupled to a manifold that houses a glycerine-filled pressure gauge calibrated 0 to bar and a dial-type thermometer with a 0 to 00 range. Unit can only operate up to 90. For further convenience the scale on the flow meter can be rotated to ensure visibility in any situation and the installed attitude of the assembly is not critical, though whenever possible the unit should be mounted with pressure gauge vertical and gauge case relief valve uppermost. The unit is designed for flow to be in the direction of the arrow on the flowmeter scale and must not be installed with the flow reversed. Note: Permissable allowed seepage <50ml/min at bar (506 psi)

10 Flow Products - For ompressed ir pplications & Monitors Features & enefits Flowline Flowswitches and alibrated for direct reading of compressed air at bar. Works in any plane. rass or stainless steel models available in 4 sizes. alibrated at bar and 20. Flow ranges from 2 to 600 SFM. Pressure -4 bar max. Optional reed switch upgrade. Loflow ir Flow measurement from. to 20 l/min. Max 0 bar rating. ompressed ir Test Equipment 6 models available, and SP. ir flow range 2 to 600 SFM. Pressure -4 bar max. Full technical specifications for the Flowmeter, Flowswitch, LoFlow and test equipment products are provided in the respective pages for these products. /F HEX Ø Note: To add an electrically operated reed switch to your flowmeter please order LoFlow rass flowmeter for air FM262 FM2622 FM2622 FM26 FM26 FM2642 FM2642 FM.26 2 FM FM FM.26 FM.26 2 FM FM SP SFM Flow range l/sec Maximum working Product number LF80450 LF LF LF LF8045 LF80245 LF.00E LF.050E LF.5E LF.20E LF.02E LF.0E (SPT Flow range male) -. - l/min l/min l/min l/sec l/min l/sec Float material cetal cetal cetal Stainless steel flowmeter for air Flow range SP SFM l/sec Maximum working FM26 FM262 FM262 FM26 FM26 FM264 FM264 FM.26 FM.26 2 FM FM.26 FM.26 2 FM.26 4 FM Product configurator Ordering example rass flowswitch for air Flow range SFM and (l/sec) (SP) Fluid type FS64 FS.64 2 FS64 FS6 FS6 2 switches Intrinsically safe high switch Intrinsically safe low switch (2-25) 0-0 (5-50) 5-25 (6-60) (0-00) ir Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. 449